This patch adds the helper crypto_inst_setname because the current
helper crypto_alloc_instance2 is no longer useful given that we
now look up the algorithm after we allocate the instance object.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch replaces use of the obsolete blkcipher with skcipher.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch replaces use of the obsolete ablkcipher with skcipher.

It also removes shash_fallback which is totally unused.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch replaces use of the obsolete ablkcipher with skcipher.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch replaces use of the obsolete ablkcipher with skcipher.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch replaces use of the obsolete ablkcipher with skcipher.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch replaces use of the obsolete ablkcipher with skcipher.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Currently aesni uses an async ctr(aes) to derive the rfc4106
subkey, which was presumably copied over from the generic rfc4106
code.  Over there it's done that way because we already have a
ctr(aes) spawn.  But it is simply overkill for aesni since we
have to go get a ctr(aes) from scratch anyway.

This patch simplifies the subkey derivation by using a straight
aes cipher instead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch converts tcrypt to use the new skcipher interface as
opposed to ablkcipher/blkcipher.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The function crypto_ahash_extsize did not include padding when
computing the tfm context size.  This patch fixes this by using
the generic crypto_alg_extsize helper.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

As it is, if you get an async ahash with a sync skcipher you'll
end up with a sync authenc, which is wrong.

This patch fixes it by considering the ASYNC bit from ahash as
well.

It also fixes a little bug where if a sync version of authenc
is requested we may still end up using an async ahash.

Neither of them should have any effect as none of the authenc
users can request for a sync authenc.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove redundant sg_init_table call. scatterwalk_ffwd doing the same.
Signed-off-by: Harsh Jain <harshjain.prof@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch resolves a number of issues with the mb speed test
function:

* The tfm is never freed.
* Memory is allocated even when we're not using mb.
* When an error occurs we don't wait for completion for other requests.
* When an error occurs during allocation we may leak memory.
* The test function ignores plen but still runs for plen != blen.
* The backlog flag is incorrectly used (may crash).

This patch tries to resolve all these issues as well as making
the code consistent with the existing hash speed testing function.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

For the timescales we are working against there is no need to
go beyond unsigned long.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The recently added test_mb_ahash_speed() has clearly serious coding
style issues. Try to fix some of them:
1. Don't mix pr_err() and printk();
2. Don't wrap strings;
3. Properly align goto statement in if() block;
4. Align wrapped arguments on new line;
5. Don't wrap functions on first argument;
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add a new mode to calculate the speed of the sha512_mb algorithm
Signed-off-by: Megha Dey <megha.dey@linux.intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch introduces the assembly routines to do SHA512 computation on
buffers belonging to several jobs at once. The assembly routines are
optimized with AVX2 instructions that have 4 data lanes and using AVX2
registers.
Signed-off-by: Megha Dey <megha.dey@linux.intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch introduces the data structures and prototypes of functions
needed for computing SHA512 hash using multi-buffer. Included are the
structures of the multi-buffer SHA512 job, job scheduler in C and x86
assembly.
Signed-off-by: Megha Dey <megha.dey@linux.intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch introduces the routines used to submit and flush buffers
belonging to SHA512 crypto jobs to the SHA512 multibuffer algorithm.
It is implemented mostly in assembly optimized with AVX2 instructions.
Signed-off-by: Megha Dey <megha.dey@linux.intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add the config CRYPTO_SHA512_MB which will enable the computation
using the SHA512 multi-buffer algorithm.
Signed-off-by: Megha Dey <megha.dey@linux.intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch introduces the multi-buffer job manager which is responsible
for submitting scatter-gather buffers from several SHA512 jobs to the
multi-buffer algorithm. It also contains the flush routine that's called
by the crypto daemon to complete the job when no new jobs arrive before
the deadline of maximum latency of a SHA512 crypto job.

The SHA512 multi-buffer crypto algorithm is defined and initialized in this
patch.
Signed-off-by: Megha Dey <megha.dey@linux.intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The ARM allmodconfig build currently warngs because of the
ux500 crypto driver not working well with the jump label
implementation that we started using for dynamic debug, which
breaks building with 'gcc -O0':

In file included from /git/arm-soc/include/linux/jump_label.h:105:0,
                 from /git/arm-soc/include/linux/dynamic_debug.h:5,
                 from /git/arm-soc/include/linux/printk.h:289,
                 from /git/arm-soc/include/linux/kernel.h:13,
                 from /git/arm-soc/include/linux/clk.h:16,
                 from /git/arm-soc/drivers/crypto/ux500/hash/hash_core.c:16:
/git/arm-soc/arch/arm/include/asm/jump_label.h: In function 'hash_set_dma_transfer':
/git/arm-soc/arch/arm/include/asm/jump_label.h:13:7: error: asm operand 0 probably doesn't match constraints [-Werror]
  asm_volatile_goto("1:\n\t"

Turning off compiler optimizations has never really been supported
here, and it's only used when debugging the driver. I have not found
a good reason for doing this here, other than a misguided attempt
to produce more readable assembly output. Also, the driver is only
used in obsolete hardware that almost certainly nobody will spend
time debugging any more.

This just removes the -O0 flag from the compiler options.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

pm_runtime_get_sync does return a error value that must be checked for
error conditions, else, due to various reasons, the device maynot be
enabled and the system will crash due to lack of clock to the hardware
module.

Before:
12.562784] [00000000] *pgd=fe193835
12.562792] Internal error: : 1406 [#1] SMP ARM
[...]
12.562864] CPU: 1 PID: 241 Comm: modprobe Not tainted 4.7.0-rc4-next-20160624 #2
12.562867] Hardware name: Generic DRA74X (Flattened Device Tree)
12.562872] task: ed51f140 ti: ed44c000 task.ti: ed44c000
12.562886] PC is at omap4_rng_init+0x20/0x84 [omap_rng]
12.562899] LR is at set_current_rng+0xc0/0x154 [rng_core]
[...]

After the proper checks:
[   94.366705] omap_rng 48090000.rng: _od_fail_runtime_resume: FIXME:
missing hwmod/omap_dev info
[   94.375767] omap_rng 48090000.rng: Failed to runtime_get device -19
[   94.382351] omap_rng 48090000.rng: initialization failed.

Fixes: 665d92fa ("hwrng: OMAP: convert to use runtime PM")
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add Giovanni and Salvatore who will take over the qat maintenance.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Until now, there was only support for the SHA1 multibuffer algorithm.
Hence, there was just one sha-mb folder. Now, with the introduction of
the SHA256 multi-buffer algorithm , it is logical to name the existing
folder as sha1-mb.
Signed-off-by: Megha Dey <megha.dey@linux.intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The existing test suite to calculate the speed of the SHA algorithms
assumes serial (single buffer)) computation of data. With the SHA
multibuffer algorithms, we work on 8 lanes of data in parallel. Hence,
the need to introduce a new test suite to calculate the speed for these
algorithms.
Signed-off-by: Megha Dey <megha.dey@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch introduces the assembly routines to do SHA256 computation
on buffers belonging to several jobs at once.  The assembly routines
are optimized with AVX2 instructions that have 8 data lanes and using
AVX2 registers.
Signed-off-by: Megha Dey <megha.dey@linux.intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch introduces the data structures and prototypes of
functions needed for computing SHA256 hash using multi-buffer.
Included are the structures of the multi-buffer SHA256 job,
job scheduler in C and x86 assembly.
Signed-off-by: Megha Dey <megha.dey@linux.intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch introduces the routines used to submit and flush buffers
belonging to SHA256 crypto jobs to the SHA256 multibuffer algorithm. It
is implemented mostly in assembly optimized with AVX2 instructions.
Signed-off-by: Megha Dey <megha.dey@linux.intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add the config CRYPTO_SHA256_MB which will enable the computation using the
SHA256 multi-buffer algorithm.
Signed-off-by: Megha Dey <megha.dey@linux.intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch introduces the multi-buffer job manager which is responsible for
submitting scatter-gather buffers from several SHA256 jobs to the
multi-buffer algorithm. It also contains the flush routine to that's
called by the crypto daemon to complete the job when no new jobs arrive
before the deadline of maximum latency of a SHA256 crypto job.

The SHA256 multi-buffer crypto algorithm is defined and initialized in
this patch.
Signed-off-by: Megha Dey <megha.dey@linux.intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Document the binding used by the Broadcom BCM5301x (Northstar) SoC
random number generator.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

There is another ecdh_shared_secret in net/bluetooth/ecc.c

Fixes: 3c4b2390 ("crypto: ecdh - Add ECDH software support")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The Broadcom BCM5301x SoCs (Northstar) utilize the same random number
generator peripheral as Northstar Plus and BCM2835, but just like the
NSP SoC, we need to enable the interrupt.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

As part of the Y2038 development, __getnstimeofday is not supposed to be
used any more. It is now replaced with ktime_get_ns. The Jitter RNG uses
the time stamp to measure the execution time of a given code path and
tries to detect variations in the execution time. Therefore, the only
requirement the Jitter RNG has, is a sufficient high resolution to
detect these variations.

The change was tested on x86 to show an identical behavior as RDTSC. The
used test code simply measures the execution time of the heart of the
RNG:

        jent_get_nstime(&time);
        jent_memaccess(ec, min);
        jent_fold_time(NULL, time, &folded, min);
        jent_get_nstime(&time2);
        return ((time2 - time));
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch replaces use of the obsolete blkcipher with skcipher.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: David Howells <dhowells@redhat.com>

Adds software fallback support for small crypto requests. In these cases,
it is undesirable to use DMA, as setting it up itself is rather heavy
operation. Gives about 40% extra performance in ipsec usecase.
Signed-off-by: Bin Liu <b-liu@ti.com>
[t-kristo@ti.com: dropped the extra traces, updated some comments
 on the code]
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The extra call to dmaengine_terminate_all is not needed, as the DMA
is not running at this point. This improves performance slightly.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Change crypto queue size from 1 to 10 for omap SHA driver. This should
allow clients to enqueue requests more effectively to avoid serializing
whole crypto sequences, giving extra performance.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Calling runtime PM API for every block causes serious performance hit to
crypto operations that are done on a long buffer. As crypto is performed
on a page boundary, encrypting large buffers can cause a series of crypto
operations divided by page. The runtime PM API is also called those many
times.

Convert the driver to use runtime_pm autosuspend instead, with a default
timeout value of 1 second. This results in upto ~50% speedup.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>