- 17 Apr, 2008 31 commits
-
-
Kumar Gala authored
Signed-off-by:Kumar Gala <galak@kernel.crashing.org>
-
Kumar Gala authored
arch/powerpc/platforms/85xx/mpc85xx_ads.c: In function ‘init_ioports’: arch/powerpc/platforms/85xx/mpc85xx_ads.c:168: warning: initialization discards qualifiers from pointer target type Signed-off-by: -
Kumar Gala authored
Signed-off-by: -
Paul Gortmaker authored
This adds in the device tree source for the SBC8641D, based largely on the mpc8641_hpcn.dts. The biggest differences are the lack of a complex IRQ mapping (since no Uli/i8259 cascade) and the different layout of devices on the localbus node. Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
-
Paul Gortmaker authored
This adds a sample defconfig for the Wind River SBC8641D board, with SMP, PCI and NFS root enabled. Signed-off-by:
-
Paul Gortmaker authored
This adds support for the Wind River SBC8641D board, based largely on the mpc86xx_hpcn support. The biggest difference is the lack of the Uli and the i8259 cascade, which simplifies things. Signed-off-by:
-
Scott Wood authored
Signed-off-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
-
Scott Wood authored
1. Detect (and bail out on) more conditions that violate the assumptions of the setup code -- we assume in such cases that the device tree is correct and reflects what the firmware did. 2. The inbound memory mask calculation was wrong. Signed-off-by:
-
Scott Wood authored
Signed-off-by:
-
Anton Vorontsov authored
This is needed to probe nor and nand flashes on the localbus. Signed-off-by:
Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by:
-
Kumar Gala authored
global_dbcr0 needs to be a per cpu set of save areas instead of a single global on all processors. Also, we switch to using DBCR0_IDM to determine if the user space app is being debugged as its a more consistent way. In the future we should support features like hardware breakpoint and watchpoints which will have DBCR0_IDM set but not necessarily DBCR0_IC (single step). Signed-off-by: -
Scott Wood authored
The kconfig entry can go away once arch/ppc and references to the config in drivers are removed. Signed-off-by:
-
Anton Vorontsov authored
Signed-off-by:
-
Anton Vorontsov authored
qe_get_brg_clk() will be used by the fsl_gtm routines. Signed-off-by:
-
Anton Vorontsov authored
Headers should include prototypes they use, otherwise build will break if we use it without explicitly including io.h: CC arch/powerpc/sysdev/qe_lib/gtm.o In file included from include/asm/qe.h:20, from arch/powerpc/sysdev/qe_lib/gtm.c:18: include/asm/immap_qe.h: In function ‘immrbar_virt_to_phys’: include/asm/immap_qe.h:480: error: implicit declaration of function ‘virt_to_phys’ make[2]: *** [arch/powerpc/sysdev/qe_lib/gtm.o] Error 1 make[1]: *** [arch/powerpc/sysdev/qe_lib] Error 2 gtm.c needs qe.h (which includes immap_qe.h) to use qe_get_brg_clk(). Signed-off-by: -
Anton Vorontsov authored
qe_muram_offset is the reverse of the qe_muram_addr, will be used for the Freescale QE USB Host Controller driver. This patch also moves qe_muram_addr into the qe.h header, plus adds __iomem hints to use with sparse. Signed-off-by:
-
Anton Vorontsov authored
Freescale UPM can be used to adjust localbus timings or to generate orbitrary, pre-programmed "patterns" on the external Localbus signals. This patch implements few routines so drivers could work with UPMs in safe and generic manner. So far there is just one user of these routines: Freescale UPM NAND driver. Signed-off-by:
-
Anton Vorontsov authored
This is needed to support other localbus peripherals, such as NAND on FSL UPM. Signed-off-by:
David Woodhouse <dwmw2@infradead.org> Signed-off-by:
-
Anton Vorontsov authored
- get rid of `model = "UCC"' in the ucc nodes It isn't used anywhere, so remove it. If we'll ever need something like this, we'll use compatible property instead. - replace last occurrences of device-id with cell-index. Drivers are modified for backward compatibility's sake. Signed-off-by:
Timur Tabi <timur@freescale.com> Signed-off-by:
-
Laurent Pinchart authored
Signed-off-by:
Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by:
-
Laurent Pinchart authored
Similarly to what is done for PQ1-based platforms, this patch resets the PQ2 Communication Processor Module in cpm2_reset() when early debugging is not enabled. This helps avoiding conflicts when the boot loader configured the CPM in an unexpected way. Signed-off-by:
-
Laurent Pinchart authored
This patch modifies the Embedded Planet EP8248E device tree to reference the SMC paramater RAM base register instead of the parameter RAM allocated by the boot loader. The cpm_uart driver will allocate parameter RAM itself, making the serial port initialisation independent of the boot loader. The patch adds the parameter RAM allocated by the boot loader in the CPM muram node, making it available to the kernel. Signed-off-by:
-
Laurent Pinchart authored
This patch relocates the buffer descriptors and the SMC parameter RAM at the end of the first CPM muram chunk, as described in the device tree. This allows device trees to stop excluding SMC parameter ram allocated by the boot loader from the CPM muram node. Signed-off-by:
-
Laurent Pinchart authored
This patch adds a new generic device tree processing function that retrieves virtual reg addresses from the device tree to the bootwrapper code. It also updates the bootwrapper code to use the new function. dt_get_virtual_reg() retrieves the virtual reg addresses from the "virtual-reg" property. If the property can't be found, it uses the "reg" property and walks the tree to translate it to absolute addresses. Signed-off-by:
-
Laurent Pinchart authored
This patch allocates parameter RAM for SMC serial ports without relying on previous initialisation by a boot loader or a wrapper layer. SMC parameter RAM on CPM2-based platforms can be allocated anywhere in the general-purpose areas of the dual-port RAM. The current code relies on the boot loader to allocate a section of general-purpose CPM RAM and gets the section address from the device tree. This patch modifies the device tree address usage to reference the SMC parameter RAM base pointer instead of a pre-allocated RAM section and allocates memory from the CPM dual-port RAM when initialising the SMC port. CPM1-based platforms are not affected. Signed-off-by:
-
Sebastian Siewior authored
Add the device tree node for the DMA engine on 8544, publish the device and enable the driver in the defconfig. Signed-off-by:
Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Kumar Gala authored
Board specific defconfigs are useful, however with the ability to do multi-board defconfigs they aren't needed in the top level configs directory Move the 83xx/85xx board specific defconfigs to individual directories under arch/powerpc/configs. Signed-off-by: -
Kumar Gala authored
The architecture allows for "Book-E" style debug interrupts to either go to critial interrupts of their own debug interrupt level. To allow for a dynamic kernel to support machines of either type we want to be able to compile in the interrupt handling code for both exception levels. Towards this goal we renamed the debug handling macros to specify the interrupt level in their name (DEBUG_CRIT_EXCEPTION/DebugCrit and DEBUG_DEBUG_EXCEPTION/DebugDebug). Additionally, on the Freescale Book-e parts we expanded the exception stacks to cover the maximum case of needing three exception stacks (normal, machine check and debug). There is some kernel text space optimization to be gained if a kernel is configured for a specific Freescale implementation but we aren't handling that now to allow for the single kernel image support. Signed-off-by: -
Kumar Gala authored
When we moved to arch/powerpc we actively tried to avoid using the ppc_md.setup_io_mappings(). Currently no board ports use it so let's remove it to avoid any new boards using it. Also, remove early_serial_map() since we don't even have a call out for it in arch/powerpc. Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
Michael Ellerman authored
There is logic in platforms/peries/lpars.c which checks if the user has specified a console on the command line, and refrains from adding a preferred console entry for the hvc/hvsi console if they have. This trips up if you use "netconsole=foo" on the command line, and has the result that you get _only_ the netconsole, because the hvc device is never added as a preferred console. Worse still if you get the netconsole configuration wrong somehow, you end up with no console at all. As it turns out we don't need to worry about checking the command line. If the user has specified "console=foo", then foo will be set as the preferred console when the command line is parsed in start_kernel(), much later than the pseries code, and so the latter setting will take effect. Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Signed-off-by:
-
Michael Ellerman authored
Move the prototype for find_udbg_vterm() into pseries.h, removing it from setup.c. Signed-off-by:
-
- 16 Apr, 2008 9 commits
-
-
Manish Ahuja authored
This changes the way we calculate how much space to reserve for the pHyp dump. Currently we reserve 256MB only. With this change, the code first checks to see if an amount has been specified on the boot command line with the "phyp_dump_reserve_size" option, and if so, uses that much. Otherwise it computes 5% of total ram and rounds it down to a multiple of 256MB, and uses the larger of that or 256MB. This is for large systems with a lot of memory (10GB or more). The aim is to have more space available for the kernel on reboot on machines with more resources. Although the dump will be collected pretty fast and the memory released really early on allowing the machine to have the full memory available, this alleviates any issues that can be caused by having way too little memory on very very large systems during those few minutes. Signed-off-by:
Manish Ahuja <mahuja@us.ibm.com> Signed-off-by:
-
Kumar Gala authored
* Removed defines KERNEL_PGD_PTRS & USER_PGD_PTRS since they aren't used anywhere * Changed pmd_page macro to use pfn_to_page so we get proper behavior if ARCH_PFN_OFFSET is set as well if we use a different memory model on ppc32. Signed-off-by:
-
Kumar Gala authored
Now that we properly set the physical address in the program header of the vmlinux ELF we can extract it to properly set the load and entry point for u-boot uImages. Before we always hard coded the load & entry point to 0. However there are situations that the kernel may be built with a non-zero physical address. We use objdump to extract the PHDR. We assume that there is only one PHDR in the vmlinux of type LOAD. Signed-off-by:
-
Kumar Gala authored
We can set LOAD_OFFSET and use the AT attribute on sections and the linker will properly set the physical address of the LOAD program header for us. This allows us to know how the PHYSICAL_START the user configured a kernel with by just looking at the resulting vmlinux ELF. This is pretty much stolen from how x86 does things in their linker scripts. Signed-off-by:
-
Kumar Gala authored
Moved phys_addr_t out of mmu-*.h and into asm/types.h so we can use it in places that before would have caused recursive includes. For example to use phys_addr_t in <asm/page.h> we would have included <asm/mmu.h> which would have possibly included <asm/mmu-hash64.h> which includes <asm/page.h>. Wheeee recursive include. CONFIG_PHYS_64BIT is a bit counterintuitive in light of ppc64 systems and thus the config option is only used for ppc32 systems with >32-bit physical addresses (44x, 85xx, 745x, etc.). Signed-off-by:
-
Kumar Gala authored
* PAGE_OFFSET is not always the start of code, use _stext instead. * grab PAGE_SIZE and KERNELBASE from asm/page.h like ppc64 does. Makes the code a bit more common and provide a single place to manipulate the defines for things like kdump. Signed-off-by:
-
Kumar Gala authored
We always use __initial_memory_limit as an address so rename it to be clear. Signed-off-by:
-
Kumar Gala authored
Now that we have a proper variable that is the address of the top of low memory we can use it to limit the lmb allocations. Signed-off-by:
-
Kumar Gala authored
* Determine the RPN we are running the kernel at runtime rather than using compile time constant for initial TLB * Cleanup adjust_total_lowmem() to respect memstart_addr and be a bit more clear on variables that are sizes vs addresses. Signed-off-by:
-
