This pull request contains Broadcom ARM-based SoCs Device Tree updates
for 5.1, please pull the following:

- Dan relicenses the Luxul DTS files to GPL 2.0+/MIT

- Hao adds support for the Phicomm K3 which is a BCM4709 SoC with dual
  BCM4366 radio

- Stefan adds support for the Raspberry Pi A+: binding and DTS files. He
  also provides a bunch of DTC warning fixes for the different RPi DTS(i)
  files and adds support for missing GPIO lines on RPi 2/3

* tag 'arm-soc/for-5.1/devicetree' of https://github.com/Broadcom/stblinux:
  ARM: dts: bcm2835-rpi-zero-w: Drop unnecessary pinctrl
  ARM: dts: bcm283x: Add missing GPIO line names
  ARM: dts: bcm2837-rpi-3-b-plus: Clarify label for STATUS_LED
  ARM: dts: bcm2837-rpi-3-b: Use consistent label for HDMI hotplug
  ARM: dts: bcm2835: Fix labels for GPIO 0,1
  ARM: dts: bcm2835-rpi: Drop unnecessary #address-cells/#size-cells
  ARM: dts: bcm283x: Fix DTC warning for memory node
  ARM: dts: add Raspberry Pi 3 A+
  dt-bindings: bcm: Add Raspberry Pi 3 A+
  ARM: dts: BCM5301X: Add basic DT for Phicomm K3
  ARM: dts: BCM53573: Relicense Luxul files to the GPL 2.0+ / MIT
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Samsung DTS ARM changes for v5.1

1. Extend support for Aries family of mobile devices (e.g. Samsung
   Galaxy S) based on S5Pv210 SoC: DRM Rotator, FIMD, PWM vibrator,
   power off, touchscreen, Broadcom BCM4329 Bluetooth and cpufreq.
2. Remove hardcoded bootargs on Galaxy S family (proper support in
   U-Boot).
3. Fix minor DTC warnings.
4. Fix Exynos4412 Odroid X2/U3 conflicting eMMC GPIO settings and regulator
   properties.
5. Fix the eMMC RTSN pin breaking proper reboot on X2.

* tag 'samsung-dt-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: exynos: Fix pinctrl definition for eMMC RTSN line on Odroid X2/U3
  ARM: dts: exynos: Fix eMMC regulator properties on Odroid U3 boards
  ARM: dts: exynos: Fix conflicting fixed-regulator GPIO flags and properties
  ARM: dts: s3c2416: Fix xti node's missing reg property warning
  ARM: dts: s5pv210: Fix onenand's unit address format warning
  ARM: dts: s5pv210: Add DMC nodes
  ARM: dts: s5pv210: Add support for more devices present on Aries
  ARM: dts: s5pv210: Add reserved memory for MFC on Aries
  ARM: dts: s5pv210: Remove hardcoded bootargs on Galaxy S and Fascinate 4G
  ARM: dts: s5pv210: Use correct fimd variant
  ARM: dts: s5pv210: Add node for exynos-rotator
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'stm32-dt-for-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt

STM32 DT updates for v5.1, round 1

Highlights:
----------

MPU part:
 -Enable Digital Thermal Sensor (dts) on stm32mp157c-ed1 (and so ev1).

MCU part:
 -Add SPI support on stm32f429 SOC (4 SPIs instances).

* tag 'stm32-dt-for-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
  ARM: dts: stm32: Enable thermal sensor support on STM32MP157c-ed1
  ARM: dts: stm32: add SPI support on STM32F429 SoC
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v5.1-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

New boards are the Rock Pi 4, NanoPC-T4 and NanoPi-M4, with the last
two being part of a family and sharing bigger parts of the devicetree.
rk3328 got sound-related upgrades and a wider patch drops mmc display-wp
fields from nodes which shouldn't use it.

* tag 'v5.1-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: clean up the abuse of disable-wp
  arm64: dts: rockchip: 'Fix' nanopi4 uSD card detect
  arm64: dts: rockchip: Add NanoPC-T4 IR receiver
  arm64: dts: rockchip: Refine nanopi4 differences
  arm64: dts: rockchip: Add DT for NanoPi M4
  arm64: dts: rockchip: add ROCK Pi 4 DTS support
  arm64: dts: rockchip: Add devicetree for NanoPC-T4
  arm64: dts: rockchip: enable analog audio node for rock64
  arm64: dts: rockchip: move rk3328 #sound-dai-cells to the soc dtsi
  arm64: dts: rockchip: add rk3328 ACODEC node
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v5.1-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

New board the Elgin-R1 based on the rv1108 soc and a number of small
improvements for rv1108 as well. RK3066 got support for the core
display components and the Edison tablet got its touchscreen added.
Apart from that a wider fix to drop display-wp usage from places where
it shouldn't be used, a pin fix for Edison and a cleanup to prevent
rk3036 board from defining sound-dai-cells for core components in
each board separately.

* tag 'v5.1-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: clean up the abuse of disable-wp
  ARM: dts: rv1108: Add support for rv1108-elgin-r1 board
  dt-bindings: Add vendor prefix for elgin
  ARM: dts: rockchip: rv1108: Add spim0 and spim1 pinctrl groups
  ARM: dts: rockchip: Add missing dma-names SPI support for rv1108
  ARM: dts: rockchip: add rk3066 vop display nodes
  ARM: dts: rockchip: add focaltech touchscreen to rk3188-bqedison2qc
  ARM: dts: rockchip: fix cif1_pdn pin on rk3188-bqedison2qc
  ARM: dts: rockchip: add HCLK_HDMI to rk3066 vio power-domain
  ARM: dts: rockchip: move rk3036 i2s sound-dail-cells into soc dtsi
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'am654-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into arm/dt

AM65x DT changes for v5.1. Includes:

- EMMC support for am654-evm board

* tag 'am654-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux:
  arm64: dts: ti: k3-am654-base-board: Add eMMC Support
  arm64: dts: ti: k3-am654: Add Support for eMMC host controller
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'davinci-for-v5.1/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into arm/dt

DaVinci device-tree updates for v5.1 contains a patch to enable analog
mic input on da850 LCDK board.

* tag 'davinci-for-v5.1/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: dts: da850-lcdk: Enable the analog mic input
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'omap-for-v5.1/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt

dts updates for omap variants for v5.1 merge window

This series contains board specific dts updates and few minor
clean-up changes:

- add stdout-path for am335x-chiliboard

- add wlcore wakeirq for omap3-evm, pandaboard and omap4-droid4

- remove unnecessary address-cells and io-cells for am33xx

- replace deprecated linux,wakeup with wakeup-source property

- use spdx license for am335x-shc

- configure ethernet pins for omap4-sdp

* tag 'omap-for-v5.1/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: omap4-sdp: Make ethernet working even if booted with latest u-boot
  ARM: dts: am335x-shc.dts: Switch to SPDX identifier
  ARM: dts: am437x: replace linux,wakeup with wakeup-source property
  ARM: dts: am33xx: Remove unnecessary properties
  ARM: dts: omap4-droid4: Configure wlcore wakeirq
  ARM: dts: Configure wlcore wakeirq for pandaboard
  ARM: dts: Add wlcore wakeirq for omap3-evm
  ARM: dts: am335x-chiliboard: Add stdout-path property
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'omap-for-v5.1/dt-ti-81xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt

dts updates for ti81xx for v5.1 merge window

Two changes to add support for McGill University's IceBoard telescope
ARM + FPGA instrumentation board. This board is used for several
telescopes around the world, see the related device tree commit for
some interesting links for more information.

Note that these changes are based on the related ti81xx soc changes.

* tag 'omap-for-v5.1/dt-ti-81xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: Adds device tree file for McGill's IceBoard, based on TI AM3874
  ARM: dts: ti81xx: Add dts boilerplate for all GPIO and SPI peripherals
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'omap-for-v5.1/soc-ti-81xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt

SoC updates for ti81xx for v5.1 merge window

Two changes to add legacy hwmod data for gpio and spi peripherals on
ti81xx. We have not yet updated ti81xx to probe devices with ti-sysc
interconnect target module driver, so these changes are still needed
to make devices usable for the related device tree changes.

* tag 'omap-for-v5.1/soc-ti-81xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: ti81xx: Add hwmod boilerplate for all GPIO and SPI peripherals
  ARM: ti81xx: Move I2C entries in omap_hwmod_81xx to maintain grouping
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This pull request adds support for the new Raspberry Pi 3 A+ and
the missing GPIO labels for RPi 2/3. Additionally it contains
some minor DT fixes.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

There is no need to specify a pinctrl for the reset GPIO. So we better
remove this avoid a potential conflict between pinctrl and pwrseq
after the pinmux driver has been changed to strict:

pinctrl-bcm2835 20200000.gpio: pin gpio41 already requested by wifi-pwrseq;
cannot claim for pinctrl-bcm2835:499
pinctrl-bcm2835 20200000.gpio: pin-41 (pinctrl-bcm2835:499) status -22
pwrseq_simple: probe of wifi-pwrseq failed with error -22
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

The GPIO sysfs is deprecated and disabled in the defconfig files.
So in order to motivate the usage of the new GPIO character device API
add the missing GPIO line names for Raspberry Pi 2 and 3. In the lack
of full schematics i would leave all undocumented pins as unnamed.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

The RPI 3 B+ provides control to both LEDs (PWR and ACT). So append
the first letter of the LED color (like in the schematics) in order
to clarify this.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

This make the GPIO label for HDMI hotplug more consistent to the other
boards.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

According to the schematics for all RPis with a 40 pin header,
the GPIOs 0 and 1 are labeled as ID_SD and ID_SC. In order to
clarify that is a I2C bus, append the third letter.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

Compiling the bcm2835-rpi.dtsi with W=1 leads to the following warning:

Warning (avoid_unnecessary_addr_size): /soc/firmware: unnecessary
 #address-cells/#size-cells without "ranges" or child "reg" property

Fix this by removing these unnecessary properties.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

Compiling the bcm283x DTS with W=1 leads to the following warning:

Warning (unit_address_vs_reg): /memory: node has a reg or ranges property,
but no unit name

Fix this by adding the unit address.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

The Raspberry Pi 3 A+ is similar to the Pi 3 B+ but has only 512 MB RAM,
1 USB 2.0 port and no Ethernet.

Compared to the Raspberry Pi 3 B it isn't possible to control BT_ON and
WL_ON separately.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Eric Anholt <eric@anholt.net>

This adds the root properties for the Raspberry Pi 3 A+ .
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Rob Herring <robh@kernel.org>

Enable STM32 Digital Thermal Sensor (dts) driver for STM32MP157c-ed1 board.
Signed-off-by: David Hernandez Sanchez <david.hernandezsanchez@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

This patch adds all SPI instances of the STM32F429 SoC.
Signed-off-by: Cezary Gapinski <cezary.gapinski@gmail.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

On the am654x-evm, sdhci0 node is connected to an eMMC. Add node and
pinmux for the same.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>

Add support for the Secure Digital Host Controller Interface (SDHCI)
present on TI's AM654 SOCs. It is compatible with eMMC5.1 Host
Specifications.

Enable only upto HS200 speed mode.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>

This router has BCM4709C0 SoC, 128 MiB NAND flash (MX30LF1G18AC-TI),
512 MiB memory and 3 x LAN and 1 x WAN ports. WiFi chips are
BCM4366C0 x 2. The router has a small LCD and 3 capactive keys driven by
a PIC microcontroller, which is in turn wired to UART1 of main board.
Signed-off-by: Hao Dong <halbertdong@gmail.com>
[rmilecki: drop chosen { }, fix whitespaces, update commit message]
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Merge tag 'juno-updates-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/dt

ARMv8 Juno/fast models updates for v5.1

1. Support for Fixed Virtual Platforms(FVP) Base RevC model to enable
   development of software around the new features available

2. Addition of dynamic-power-coefficient information for CPUs on Juno

3. Miscellaneous changes like re-ordering device nodes, using existing
   macros for GIC flags in interrupt-maps and using list instead of
   tuple(which is wrong but works as number of interrupt cells is 1)
   for mmci interrupts

* tag 'juno-updates-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  arm64: dts: juno: Add cpu dynamic-power-coefficient information
  arm64: dts: fast models: Add DTS fo Base RevC FVP
  arm64: dts: juno/fast models: sort couple of device nodes
  arm64: dts: models: use list instead of tuple for mmci interrupts
  arm64: dts: juno/fast models: using GIC macros instead of hardcoded values
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'vexpress-updates-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/dt

ARMv7 Vexpress updates for v5.1

Couple of simple changes to add dynamic-power-coefficient information
for CPUs on TC2 and fix tuple used for uart and mmci interrupts with
lists.

* tag 'vexpress-updates-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  arm: dts: vexpress-v2p-ca15_a7: Add cpu dynamic-power-coefficient information
  ARM: dts: vexpress: use list instead of tuple for mmci interrupts
  ARM: dts: mps2: use list instead of tuple for uart interrupts
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'aspeed-5.1-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt

ASPEED device tree updates for 5.1

 - New machine: Inspur ON5263M5, an Intel Xeon OCP compute node

 - Misc device tree updates from the OpenBMC project

 - #interrupt-cells fix for GPIO controller

* tag 'aspeed-5.1-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
  ARM: dts: aspeed: quanta-q71l: enable uart1
  ARM: dts: aspeed: quanta-q71l: enable lpc_ctrl node
  ARM: dts: aspeed: tiogapass: Add uarts for SoL
  ARM: dts: aspeed: tiogapass: Add LPC devices
  ARM: dts: aspeed: Add Inspur on5263m5 BMC
  ARM: dts: aspeed: tiogapass: Add sensors
  ARM: dts: aspeed: tiogapass: Enable KCS
  ARM: dts: aspeed: Add KCS support for LPC BMC
  ARM: dts: aspeed: Add #interrupt-cells property to gpio controllers
  ARM: dts: aspeed-palmetto: Add i2c OCC hwmon node
  ARM: dts: aspeed: stardragon4800: Add power supply
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'sunxi-dt64-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt

Allwinner DT64 changes for 5.1

A few small improvements for the A64 this cycle:

  - ARM PMU added
  - Allwinner ARM architected timer workaround enabled
    This works around timer value wrapping found in the Allwinner
    implementation of the ARM architected timer.

* tag 'sunxi-dt64-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  arm64: dts: allwinner: a64: Enable A64 timer workaround
  arm64: dts: allwinner: a64: Fix a typo
  arm64: dts: allwinner: a64: Add PMU node
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'sunxi-dt-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt

Allwinner DT changes for 5.1

As usual, this is a random assortment of changes:

  - ARM PMU is enabled on the A10
  - The first usage of the PIO pinbank regulator supplies added,
    for the Bananapi
  - Broadcom-based Bluetooth enabled on the Bananapi M2 Magic and M2
    Ultra, using the serdev bindings
  - Video codec added for the A10
  - Display pipeline for the A23 added and enabled for the generic Q8
    tablets

* tag 'sunxi-dt-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  ARM: dts: sun8i-a23-q8: Set compatible string for LCD panel
  ARM: dts: sun8i-q8-common: Enable display pipeline with RGB LCD panel
  ARM: dts: sun8i-a23: Add compatible strings to display pipeline device nodes
  ARM: dts: sun8i-a33: Move display pipeline nodes to a23/a33 common dtsi
  ARM: dts: sun8i-a23-a33: Move NAND controller device node to sort by address
  ARM: dts: sun4i-a10: Add Video Engine and reserved memory nodes
  ARM: dts: sun4i: Add support for the C1 SRAM region with the SRAM controller
  ARM: dts: sunxi: bananapi-m2-plus: Add Bluetooth device node
  ARM: dts: sun8i: r40: bananapi-m2-ultra: Add Bluetooth device node
  ARM: dts: sun8i: r40: bananapi-m2-ultra: Fix WiFi regulator definitions
  ARM: dts: sun8i: r40: Add pinmux setting for CLK_OUT_A
  ARM: dts: sun8i: r40: Add pinmux settings for UART3 on PG pingroup
  ARM: dts: sun7i: bananapi: Add GPIO banks regulators
  ARM: dts: sun4i-a10: Add PMU node
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-arm64-dt-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt

Renesas ARM64 Based SoC DT Updates for v5.1

R-Car H3 (r8a7795) SoC
- Sort i2c and pciec0 nodes within soc node
R-Car H3 (r8a7795) and M3-W (r8a7796) SoCs
- Remove BUSIF0 settings from rcar_sound,ssi

R-Car M3-W (r8a7796) based Salvator-XS board
- Convert to new LVDS DT bindings

R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) based ULCB boards
- Use audio-graph-card to allow secondary sound device on kingfisher
  daugher board
- Add HDMI sound support

Kingfisher daughterboard for R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N
(r8a77965) based ULCB boards
- Add pcm3168 sound codec

R-Car E3 (r8a77990) SoC
- Enable DMA for SCIF2

R-Car E3 (r8a77990) based Ebisu board
- HS400 for onboard eMMC
- Use simple-audio-card rather than simple-scu-audio-card
- Correct EthernetAVB phy mode as rgmii
- Add backlight and follow-up to correct duplicate regulator number

R-Car V3M (r8a77970) based v3msk starter kit
- Specify EtherAVB PHY IRQ now that GPIO support is present

R-Car D3 (r8a77995) based draak board
- Set better backlight levels

RZ/G2M (r8a774a1) SoC
- Correct hsusb reg size

RZ/G2E (r8a774c0) SoC
- Intial SoC DT
- Add: and SYS-DMAC controller, SCIF, HSCIF, INTC-EX
  PFC, GPIO, Ethernet AVB, watchdog, secondary CA3 core, SDHI,
  I2C, IIC-DVFS, IPMU, CAN, thermal, MSIOF, audio, PWM, display output,
  USB2.0, USB-DMAC, HSUSB, USB3.0, IPMMU, PCIe, VIN and CSI-2 support
- A follow-up patch included in this pull-request enables DMA for SCIF2
  so that DMA is enabled for all SCIF nodes

* tag 'renesas-arm64-dt-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (44 commits)
  arm64: dts: renesas: r8a77990: ebisu: Enable HS400 of SDHI3
  arm64: dts: renesas: r8a77990: Enable DMA for SCIF2
  arm64: dts: renesas: r8a774c0: Enable DMA for SCIF2
  arm64: dts: renesas: r8a77990: ebisu: Fix backlight regulator numbering
  arm64: dts: renesas: v3msk: specify EtherAVB PHY IRQ
  arm64: dts: renesas: r8a77990-ebisu: use simple-audio-card
  arm64: dts: renesas: r8a7796: remove BUSIF0 settings from rcar_sound,ssi
  arm64: dts: renesas: r8a7795: remove BUSIF0 settings from rcar_sound,ssi
  arm64: dts: renesas: ulcb-kf: add pcm3168 sound codec
  arm64: dts: renesas: ulcb: add HDMI sound support
  arm64: dts: renesas: ulcb: use audio-graph-card
  arm64: dts: renesas: r8a7796: salvator-xs: Convert to new LVDS DT bindings
  arm64: dts: renesas: r8a77990: Sort i2c nodes within soc node
  arm64: dts: renesas: r8a77990: sort pciec0 node within soc node
  arm64: dts: renesas: r8a774a1: Fix hsusb reg size
  arm64: dts: renesas: r8a774c0: Add VIN and CSI-2 device nodes
  arm64: dts: renesas: r8a774c0: Add PCIe device node
  arm64: dts: renesas: r8a774c0: Connect RZ/G2E Audio-DMAC to IPMMU
  arm64: dts: renesas: r8a774c0: Connect RZ/G2E AVB to IPMMU
  arm64: dts: renesas: r8a774c0: Connect RZ/G2E SYS-DMAC to IPMMU
  ...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'integrator-dts-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into arm/dt

This updates the Integrator DTS files with the device
tree nodes required by the DRM driver.

* tag 'integrator-dts-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
  ARM: dts: Augment panel setting for Integrator/CP
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'nomadik-dts-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt

This add the new display driver and DRM driver device
nodes to the Nomadik NHK8815.

* tag 'nomadik-dts-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
  ARM: dts: nomadik: Augment NHK15 panel setting
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The 'arm,armv8' compatible string is only for software models. It adds
little value otherwise and is inconsistently used as a fallback on some
platforms. Remove it from those platforms.

This fixes warnings generated by the DT schema.
Reported-by: Michal Simek <michal.simek@xilinx.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Acked-by: Nishanth Menon <nm@ti.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Chanho Min <chanho.min@lge.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Wei Xu <xuwei5@hisilicon.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Chunyan Zhang <zhang.lyra@gmail.com>
Acked-by: Robert Richter <rrichter@cavium.com>
Acked-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Remove the usage of skeleton.dtsi in the remaining dts files. It was
deprecated since commit 9c0da3cc ("ARM: dts: explicitly mark
skeleton.dtsi as deprecated"). This will make adding a unit-address to
memory nodes easier.

The main tricky part to removing skeleton.dtsi is we could end up with
no /memory node at all when a bootloader depends on one being present. I
hacked up dtc to check for this condition.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'stm32-dt-for-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt

STM32 DT updates for v4.21, round 1

Highlights:
----------

-MPU STM32MP157 platform update:
 -Declare DMAs for timers
 -Add sleep support for CAN
 -Split CAN RAM mapping between the 2 FDCAN instances
 -Add support of thermal sensor (DTS)

* tag 'stm32-dt-for-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
  ARM: dts: stm32: add thermal sensor support on STM32MP157c
  ARM: dts: stm32: add can1 sleep pins muxing on stm32mp157c-ev1 board
  ARM: dts: stm32: add can1 sleep pins muxing
  ARM: dts: stm32: change CAN RAM mapping on stm32mp157c
  ARM: dts: stm32: don't use timers dmas on stm32mp157c-ev1
  ARM: dts: stm32: don't use timers dmas on stm32mp157c-ed1
  ARM: dts: stm32: Add dmas to timer on stm32mp157c
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Enable the uart1 node such that the clock will be enabled.
Signed-off-by: Patrick Venture <venture@google.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>

Enable the lpc_ctrl node in the quanta-q71l dts such that the LPC_CLK is
enabled.
Signed-off-by: Patrick Venture <venture@google.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>

Added uart2 and uart3 in Facebook Tiogapass for routing serial input
from Host to BMC for SoL via LPC.
Signed-off-by: Vijay Khemka <vijaykhemka@fb.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>

Added lpc control for enabling lpc clock and lpc snoop devices to
Facebook Tiogapass device tree.
Signed-off-by: Vijay Khemka <vijaykhemka@fb.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>