- 12 Dec, 2018 6 commits
-
-
Olof Johansson authored
Merge tag 'samsung-dt64-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt Samsung DTS ARM64 changes for v4.21 1. Update DWC3 hardware modules to Exynos5433 specific variant. 2. Update cooling maps to include all CPU devices in multiple DTS files. * tag 'samsung-dt64-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: exynos: Add all CPUs in cooling maps arm64: dts: exynos: Update DWC3 modules on Exynos5433 SoCs Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'samsung-dt-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt Samsung DTS ARM changes for v4.21 1. Add missing properties and nodes for PMIC clocks in multiple DTS files. 2. Add UHS-I bus speed support to Odroid XU3/XU4/HC SD card and bump the maximum clock frequency to 200 MHz for SD and eMMC. 3. Update cooling maps to include all CPU devices in multiple DTS files. 4. Enable quirks for Exynos3250 DWC. 5. Add JPEG CODEC node to S5Pv210. 6. Add opp-suspend to devfreq OPPs on Exynos4 boards to fix resuming from suspend to RAM. 7. Remove eDP from Arndale board as it does not work and breaks also DSI. * tag 'samsung-dt-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: remove display-port node from Arndale ARM: dts: exynos: Add opp-suspend to DMC and leftbus devfreq OPPs on Exynos4 ARM: dts: s5pv210: Add s5p-jpeg codec node. ARM: dts: exynos: Use Samsung SoC specific compatible for DWC2 module ARM: dts: exynos: Add all CPUs in cooling maps ARM: dts: exynos: Clarify comment explaining purpose of Odroid XU3 DTSI ARM: dts: exynos: Add pin configuration for SD write protect on Odroid XU3/XU4/HC1 ARM: dts: exynos: Update maximum frequency for eMMC to 200MHz on Odroid XU3/XU4 ARM: dts: exynos: Update maximum frequency for SD card to 200MHz on Odroid XU3/XU4/HC1 ARM: dts: exynos: Fix LDO13 min values on Odroid XU3/XU4/HC1 ARM: dts: exynos: Add UHS-I bus speed support to Odroid XU3/XU4/HC1 ARM: dts: exynos: Add missing clocks to RTC node for Arndale board ARM: dts: exynos: Add compatible for s5m8767 clocks node on Itop Core ARM: dts: exynos: Add compatible for s2mps11 clocks node on Exynos542x Signed-off-by: Olof Johansson <olof@lixom.net>
-
git://git.infradead.org/linux-mvebuOlof Johansson authored
mvebu dt64 for 4.21 (part 1) - complete the description of the clearfog-gt-8k board (Armada 8040 based board) - declare eMMC on espressobin (Armada 3720 based board) which still need to be enable by the bootloader as it is not present on all the board. - add a new version of the Macchiatobin (Armada 8040 based board): the Single Shot (without the 10G 3310 PHYs). * tag 'mvebu-dt64-4.21-1' of git://git.infradead.org/linux-mvebu: arm64: dts: clearfog-gt-8k: describe mini-PCIe CON2 USB arm64: dts: add support for Macchiatobin Single Shot board arm64: dts: marvell: armada-37xx: Enable emmc on espressobin arm64: dts: marvell: armada37xx: Add emmc/sdio pinctrl definition arm64: dts: clearfog-gt-8k: enable mini-PCIe CON2 USB arm64: dts: clearfog-gt-8k: 1G eth PHY reset signal arm64: dts: clearfog-gt-8k: fix USB regulator gpio polarity Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'qcom-arm64-for-4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt Qualcomm ARM64 Updates for v4.21 Part 2 * Switch to use dwc3-qcom glue driver on MSM8996 * Fix issue with xo clk name on MSM8998 * Add cooling maps on MSM8916 * Add UART nodes on SDM845 * Add camera subsystem support on MSM8996 and MSM8916 * tag 'qcom-arm64-for-4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: arm64: dts: msm8996: Use dwc3-qcom glue driver for USB arm64: dts: qcom: msm8998: Fixup clock to use xo_board arm64: dts: qcom: sdm845: Add UART nodes arm64: dts: qcom: msm8996: Add CAMSS support arm64: dts: qcom: msm8996: Add VFE SMMU node arm64: dts: qcom: Add pinctrls for camera sensors arm64: dts: qcom: Add Camera Control Interface pinctrls arm64: dts: qcom: msm8916: Add CAMSS support arm64: dts: qcom: msm8916: Add IOMMU sub-node for VFE context bank arm64: dts: msm8916: Add all CPUs in cooling maps Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'sunxi-dt64-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt Allwinner arm64 DT changes for 4.21 Our usual set of arm64 DT changes, with the biggest additions being: - Support for the video decoding engine in the A64 - Support for the audio codec in the A64 - USB Support in the H6 - HDMI Support in the H6 - EMAC Support in the H6 - New board: Orange Pi Lite2 * tag 'sunxi-dt64-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (27 commits) arm64: dts: allwinner: a64: Fix up RTC device node and clock references arm64: dts: allwinner: a64: Add Video Engine node arm64: dts: allwinner: a64: Add support for the SRAM C1 section arm64: dts: allwinner: a64: pinebook: enable power supplies arm64: dts: allwinner: a64: sopine-baseboard: enable power supplies arm64: dts: allwinner: axp803: add AC and battery power supplies arm64: dts: allwinner: a64: bananapi-m64: Enable audio codec arm64: dts: allwinner: a64: enable sound on Pinebook arm64: dts: allwinner: a64: enable sound on Pine64 and SoPine arm64: dts: allwinner: a64: add nodes necessary for analog sound support arm64: dts: allwinner: h6: orangepi: Add device nodes for LEDs arm64: dts: allwinner: h6: orangepi: Enable USB 2.0 host and OTG ports arm64: dts: allwinner: h6: orangepi: Add board-wide 5V regulator arm64: dts: allwinner: h6: fix EMAC compatible string sequence arm64: dts: allwinner: a64: Add device node for Mali-400 GPU dt-bindings: gpu: mali-utgard: Add compatible for A64 Mali arm64: dts: allwinner: h6: enable USB2 on Pine H64 arm64: dts: allwinner: h6: add USB Vbus regulator for Pine H64 arm64: dts: allwinner: h6: add USB2-related device nodes arm64: dts: allwinner: h6: Enable HDMI output on Pine H64 board ... Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'sunxi-dt-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt Allwinner DT changes for 4.21 This is a quite big pull request this time, with a huge number of changes (and patches) due to us fixing the vast majority of the DTC warnings our DT had. We also have a bunch of other good, more meaningful, changes: - Support for the new Allwinner T3 (rebranded R40) and f1c100s (armv5) SoCs - AXP803 PMIC AC Power supply support - Rework of the oscillators tree - Two new boards: the t3-cqa3t-bv3 and Lichee Pi Nano Plus a few enhancements here and there. * tag 'sunxi-dt-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (84 commits) ARM: dts: sunxi: Fix PMU compatible strings ARM: dts: sun8i: r40: Add RTC device node ARM: dts: sunxi: h3/h5: Fix up RTC device node and clock references ARM: dts: sun8i: a23/a33: Fix up RTC device node ARM: dts: sun8i: r40: Add clock accuracy for external oscillators ARM: dts: sunxi: h3/h5: Add clock accuracy for external oscillators ARM: dts: sun8i: a33: Drop audio codec oversampling rate to 128 fs ARM: dts: sun8i: h3: Remove unnecessary reserved memory node ARM: dts: sun8i: a33: Remove unnecessary reserved memory node ARM: dts: suniv: Add device tree for Lichee Pi Nano ARM: dts: suniv: add initial DTSI file for F1C100s ARM: dts: axp81x: add AC power supply subnode ARM: dts: sun8i: v3s: Remove skeleton and memory to avoid warnings ARM: dts: sun8i: v3s: Provide default muxing for relevant controllers ARM: dts: sun8i: v3s: Change pinctrl nodes to avoid warning ARM: dts: sun8i: v3s: Change LRADC node names to avoid warnings ARM: dts: sun8i: h3: Remove leading zeros from unit-addresses ARM: dts: sun8i: BPI-M2M: Remove i2c nodes ARM: dts: sun8i: a23/a33: Provide default muxing for relevant controllers ARM: dts: sunxi: reference: Move the muxing back to the common DTSI ... Signed-off-by: Olof Johansson <olof@lixom.net>
-
- 11 Dec, 2018 8 commits
-
-
Olof Johansson authored
Merge tag 'tegra-for-4.21-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt arm64: tegra: Device tree change for v4.21-rc1 These changes add a bunch of features for Tegra194 and Tegra186, such as wake events, on-die RTC, temperature sensors, HDA for audio over HDMI and fan support on Jetson Xavier to allow cooling of the device. * tag 'tegra-for-4.21-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (29 commits) arm64: tegra: Set reg property for display-hub on Tegra194 arm64: tegra: Set reg property for display-hub on Tegra186 arm64: dts: tegra186: Enable IOMMU for SDHCI arm64: tegra: Enable HDA controller on Jetson TX1 arm64: tegra: Add CEC controller on Tegra194 arm64: tegra: Enable HDA on Jetson Xavier arm64: tegra: Add HDA controller on Tegra194 arm64: tegra: Add CEC controller on Tegra186 arm64: tegra: Enable HDA on Jetson TX2 arm64: tegra: Add HDA controller on Tegra186 arm64: tegra: Add temperature sensor on P2888 arm64: tegra: Add gpio-keys on Jetson Xavier arm64: tegra: Add AON GPIO controller on Tegra194 arm64: tegra: p2888: Enable on-die RTC arm64: tegra: Add RTC support on Tegra194 arm64: tegra: Enable PMC wake events on Tegra194 arm64: tegra: p3310: Enable on-die RTC arm64: tegra: Add RTC support on Tegra186 arm64: tegra: Enable PMC wake events on Tegra186 arm64: tegra: Fix power key interrupt type on Jetson TX2 ... Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'tegra-for-4.21-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt ARM: tegra: Device tree changes for v4.21-rc1 These changes add the external memory controller on Tegra20 as well as the VIC on Tegra124. * tag 'tegra-for-4.21-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: Add VIC on Tegra124 ARM: dts: tegra20: Add clock entry to External Memory Controller ARM: dts: tegra20: Add interrupt entry to External Memory Controller Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'tegra-for-4.21-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt dt-bindings: Changes for v4.21-rc1 This contains a few cleanups of and additions to existing device tree bindings, such as XUSB, EMC, PMC and thermal. * tag 'tegra-for-4.21-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: dt-bindings: tegra186-pmc: Add interrupt controller properties dt-bindings: thermal: tegra-bpmp: Add Tegra194 support dt: bindings: Move tegra20-emc binding to memory-controllers directory dt: bindings: tegra20-emc: Document clock property dt: bindings: tegra20-emc: Document interrupt property dt-bindings: usb: xhci-tegra: Add power-domain details Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'renesas-dt-bindings-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Renesas ARM Based SoC DT Bindings Updates for v4.21 * Move 'renesas,prr' binding to its own document - Prepration for converting board-level bindings to json-schema * Document iW-RainboW-G20D-Qseven-RZG1N board and iWave RZ/G1N SOM * tag 'renesas-dt-bindings-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: dt-bindings: arm: renesas: Move 'renesas,prr' binding to its own doc dt-bindings: arm: renesas: Document iW-RainboW-G20D-Qseven-RZG1N board dt-bindings: arm: renesas: Document iWave RZ/G1N SOM Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'renesas-arm-dt2-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Second Round of Renesas ARM Based SoC DT Updates for v4.21 * RZ/G1N (r8a7744) SoC - Describe in DT: SYS-DMAC, GPIO, Ethernet AVB, SMP, [H]SCIF{A|B}, I2C, USB 2.0 and 3.0 hosts, USB-DMAC, HSUSB, RWDT, Audio, CAN, IRQC, thermal, CMT, VIN, VSP, IPMMU, PMU, TPU, QSPI MSIOF, and PCIE - iWave G20D-Q7 board - Initial support - Enable eMMC, SDHI and SPIO NOR support - Add camera daughterboard * RZ/G1M (r8a7743) SoC - Remove legacy "renesas,rcar-thermal" compatibility * tag 'renesas-arm-dt2-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (34 commits) ARM: dts: r8a7744-iwg20m: Add SPI NOR support ARM: dts: iwg20d-q7-common: Move cmt/rwdt node out of RZ/G1M SOM ARM: dts: r8a7744: Add PCIe Controller device node ARM: dts: r8a7744: Add xhci support ARM: dts: r8a7744: Add MSIOF[012] support ARM: dts: r8a7744: Add QSPI support ARM: dts: r8a7744-iwg20d-q7-dbcm-ca: Add device tree for camera DB ARM: dts: r8a7744: Add TPU support ARM: dts: r8a7744: Add PWM SoC support ARM: dts: r8a7744: Add IPMMU DT nodes ARM: dts: r8a7744: Add VSP support ARM: dts: r8a7744: add VIN dt support ARM: dts: r8a7744: Add CMT SoC specific support ARM: dts: r8a7744: Add thermal device to DT ARM: dts: r8a7744: Add IRQC support ARM: dts: r8a7744: Add CAN support ARM: dts: r8a7744: Add audio support ARM: dts: r8a7744: Add RWDT node ARM: dts: r8a7744: Add USB-DMAC and HSUSB device nodes ARM: dts: r8a7744: USB 2.0 host support ... Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'renesas-arm64-dt2-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Second Round of Renesas ARM64 Based SoC DT Updates for v4.21 * R-Car D3 (r8a77995) SoC based Draak board - Add the backlight device for the LVDS1 output * R-Car H3 (r8a7795) ES1.0 SoC - Add missing power domains to IPMMU nodes * R-Car M3-N (r8a77965) SoC - Remove non-existent IPMMU-IR * tag 'renesas-arm64-dt2-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: dts: renesas: r8a77995: draak: Add backlight arm64: dts: renesas: r8a7795-es1: Add missing power domains to IPMMU nodes arm64: dts: renesas: r8a77965: Remove non-existent IPMMU-IR Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'aspeed-4.21-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into next/dt ASPEED device tree updates for 4.20 - New machine: Facebook Backpack-CMM BMC and flash layout - OpenPower reference systems (Palmetto P8, Romulus P9) move to the ColdFire based FSI driver - Misc device tree updates from the OpenBMC project * tag 'aspeed-4.21-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: ARM: dts: aspeed: Add Facebook Backpack-CMM BMC ARM: dts: Add Facebook BMC flash layout ARM: dts: aspeed: wspoon: Enable iio-hwmon battery ARM: dts: aspeed: romulus: Enable iio-hwmon-battery ARM: dts: aspeed: Enable VHUB on Romulus ARM: dts: aspeed-palmetto: Add LPC control node ARM: dts: aspeed: Palmetto system can use coprocessor for FSI ARM: dts: aspeed: Romulus system can use coprocessor for FSI Signed-off-by: Olof Johansson <olof@lixom.net>
-
https://github.com/rjarzmik/linuxOlof Johansson authored
This device-tree pxa update brings : - various fixes from Daniel (W=12 issues mainly) - support for the first pxa3xx devicetree pxa board * tag 'pxa-dt-4.21' of https://github.com/rjarzmik/linux: ARM: dts: pxa3xx: Add Raumfeld DTS files ARM: dts: pxa: clean up USB controller nodes ARM: dts: pxa3xx: clean up pxa3xx clock controller node name ARM: dts: pxa3xx: order timer and gcu nodes under /pxabus ARM: dts: pxa2xx: fix hwuart memory range ARM: dts: pxa3xx: drop #address-cells and #size-cells from pinctrl node ARM: dts: pxa2xx: drop #address-cells and #size-cells from /cpus ARM: dts: pxa3xx: add gcu node Signed-off-by: Olof Johansson <olof@lixom.net>
-
- 08 Dec, 2018 3 commits
-
-
Baruch Siach authored
Enable the USB3 peripheral that is wired to CON2 on the Clearfog GT-8K board. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
-
Russell King authored
Add DT support for the Macchiatobin Single Shot board from SolidRun, which is similar to the Double Shot board, but does not have the 10G 3310 PHYs - the two ethernet ports are instead connected directly to the SFP+ cages. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
-
Ding Tao authored
The ESPRESSObin board has a emmc interface available on U11: declare it and let the bootloader enable it if the emmc is present. [gregory.clement@bootlin.com: disable the emmc by default] Signed-off-by: Ding Tao <miyatsu@qq.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
-
- 07 Dec, 2018 9 commits
-
-
Manu Gautam authored
Move from dwc3-of-simple to dwc3-qcom glue driver to support peripheral mode which requires qscratch wrapper programming on VBUS event. Fixes: a4333c3a ("usb: dwc3: Add Qualcomm DWC3 glue driver") Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Tested-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
-
Andy Gross authored
This patch sets the msm8998 xo clock name back to xo_board. Recent clock tree changes fixed the clock tree and the change to the xo name is causing issues where msm8998 boards do not boot properly. Let's change it back and leave the xo label on it. Fixes: 634da330 (arm64: dts: qcom: msm8998: correct xo clock name) Signed-off-by: Andy Gross <andy.gross@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
-
Rob Herring authored
"arm,cortex-a15-pmu" is not a valid fallback compatible string for an Cortex-A7 PMU, so drop it. Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
-
Thierry Reding authored
Technically the display-hub driver could access registers via the specified region, though it practice it will do so via the display controllers' register regions. Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Thierry Reding authored
Technically the display-hub driver could access registers via the specified region, though it practice it will do so via the display controllers' register regions. Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Chen-Yu Tsai authored
The RTC module on the A64 was claimed to be the same as on the A31, when in fact it is not. It is actually compatible to the H3's RTC. The A64's RTC has some extra crypto-related registers which the H3's does not, but the exact function of these is not clear. This patch fixes the compatible string and clock properties to conform to the updated bindings. The device node for the internal oscillator is removed, as it is internalized into the RTC device. Clock references to the IOSC and LOSC are also fixed. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
-
Chen-Yu Tsai authored
The R40 has an RTC hardware block, which has additional registers that are not related to RTC or clock functions, and is otherwise compatible with the H3's RTC. Add a device node for it, and fix up any references to the LOSC. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
-
Chen-Yu Tsai authored
The RTC module on the H3 was claimed to be the same as on the A31, when in fact it is not. The A31 does not have an RTC external clock output, and its internal RC oscillator's average clock rate is not in the same range. The H5's RTC has some extra crypto-related registers compared to the H3. Their exact functions are not clear. Also the RTC-VIO regulator has different settings. This patch fixes the compatible string and clock properties to conform to the updated bindings. The device node for the internal oscillator is removed, as it is internalized into the RTC device. Clock references to the IOSC and LOSC are also fixed. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
-
Chen-Yu Tsai authored
The RTC module on the A23 was claimed to be the same as on the A31, when in fact it is not. The A31 does not have an RTC external clock output, and its internal RC oscillator's average clock rate is not in the same range. The A33's RTC is the same as the A23. This patch fixes the compatible string and clock properties to conform to the updated bindings. The register range is also fixed. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
-
- 06 Dec, 2018 14 commits
-
-
Rob Herring authored
In preparation to convert board-level bindings to json-schema, move various misc SoC bindings out to their own file. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Biju Das authored
Document the iW-RainboW-G20D-Qseven-RZG1N device tree bindings, listing it as a supported board. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Biju Das authored
Document the iW-RainboW-G20M-RZ/G1N Qseven device tree bindings, listing it as a supported system on module. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Andrzej Hajda authored
Arndale boards have wires for DSI and eDP panels, but in-kernel support for eDP panels is broken for long time and breaks display support even on boards with DSI panels. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
-
Krishna Reddy authored
Enable IOMMU for all SDHCI controllers in Tegra186. Signed-off-by: Krishna Reddy <vdumpa@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Thierry Reding authored
The HDA controller can be used for audio playback over HDMI. Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Thierry Reding authored
The CEC controller found on Tegra194 can be used to control consumer devices using the HDMI CEC pin. Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Thierry Reding authored
Enable the HDA controller on Jetson Xavier so that it can be used for audio playback over HDMI. Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Sameer Pujar authored
The HDA controller found on Tegra194 can be used for audio playback over HDMI. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Thierry Reding authored
The CEC controller found on Tegra186 can be used to control consumer devices using the HDMI CEC pin. Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Thierry Reding authored
Enable the HDA controller on Jetson TX2 so that it can be used for audio playback over HDMI. Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Thierry Reding authored
The HDA controller found on Tegra186 can be used for audio playback over HDMI. Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Chen-Yu Tsai authored
The R40 datasheet specifies a tolerance range for the external oscillators used. Add them to the device tree as the clock accuracy. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
-
Chen-Yu Tsai authored
The H3 datasheet specifies a tolerance range for the external oscillators used. Add them to the device tree as the clock accuracy. The internal oscillator is left unchanged, as it will be removed later. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
-