Take ecm_bind() for example, it call gadget_is_{*}speed() API to show
gadget max support speed, it is not much help, remove the API usage here
is safe.

Similar change apply to acm,eem,loopback,ncm,obex,rndis,serial,
sourcesink,subset functions.
Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Link: https://lore.kernel.org/r/20230803091053.9714-8-quic_linyyuan@quicinc.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When call this function, gadget already have working speed, if it is
USB_SPEED_SUPER_PLUS, in theroy gadget_is_superspeed_plus() checking
should be true, so there is no need to call it. it is same for other
working speed.

Remove all gadget_is_{*}speed_plus() API call to clean it up.
Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Link: https://lore.kernel.org/r/20230803091053.9714-7-quic_linyyuan@quicinc.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb_assign_descriptors() usally called inside function bind operation,
and gadget still have no working connection speed, let's support all
speed at this point, it may possible allocate extra memory to store
descriptors, but it is small and acceptable.

Remove gadget_is_{*}speed() API checking to allow support all speed.
Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Link: https://lore.kernel.org/r/20230803091053.9714-6-quic_linyyuan@quicinc.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Take f_midi_bind() for example,  when composite layer call it, it will
allocate hs descriptor by calling gadget_is_dualspeed() API to check
gadget max support speed capability, but most other gadget function didn't
do like this.

To follow other function drivers, it is safe to remove the check which
mean support all possible link speed by default in function driver.

Similar change apply to midi2 and uvc.

Also in midi and midi2, as there is no descriptor difference between
super speed and super speed plus, follow other gadget function drivers,
do not allocate descriptor for super speed plus, composite layer will
handle it properly.
Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Link: https://lore.kernel.org/r/20230803091053.9714-5-quic_linyyuan@quicinc.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

when call uvc_function_bind(), gadget still have no connection speed,
just follow other gadget function, use fs endpoint descriptor to allocate
a video endpoint, remove gadget_is_{super|dual}speed() API call.
Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Link: https://lore.kernel.org/r/20230803091053.9714-4-quic_linyyuan@quicinc.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In function ecm_bitrate(), it is not support report bit rate for super
speed plus mode, but it can use same bit rate value defined in ncm and
rndis.

Add a common inline function gether_bitrate() which report different for
all possible speeds, it can be used by ecm, ncm and rndis, also remove
old function from them.
Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Link: https://lore.kernel.org/r/20230803091053.9714-3-quic_linyyuan@quicinc.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Take ecm_bitrate() as example, it will be called after gadget device
link speed negotiation, consider code
if (gadget_is_superspeed(g) && g->speed == USB_SPEED_SUPER),
if a gadget device link speed is USB_SPEED_SUPER,
gadget_is_superspeed(g) must be true, or not it is a wrong
configuration of gadget max support speed.

Remove gadget_is_superspeed(g) checking should be safe, and remove other
similar operation in ncm, rndis, u_ether.
Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Link: https://lore.kernel.org/r/20230803091053.9714-2-quic_linyyuan@quicinc.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Exynos850 has dwc3 compatible USB controller, so it can reuse existing
dwc3 glue layer. Document a new compatible for Exynos850 and its clocks.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20230819031731.22618-2-semen.protsenko@linaro.orgReviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add Exynos850 compatible string and associated driver data. Only two
clocks are needed for this SoC:
  - bus_early: bus clock needed for registers access
  - ref: USB 2.0 DRD reference clock (50 MHz)
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230819031731.22618-4-semen.protsenko@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The bitwise attribute is used by the sparse utility to make sure the
variable is converted to the local processor type before other (unsafe)
operations are performed on the variable. Fix the below sparse warnings
type casted with __le16:

warning: incorrect type in assignment (different base types)
   expected unsigned short [usertype]
   got restricted __le16 [usertype]
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/all/202209020044.CX2PfZzM-lkp@intel.com/Signed-off-by: Piyush Mehta <piyush.mehta@amd.com>
Link: https://lore.kernel.org/r/20230822063201.16929-4-piyush.mehta@amd.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb_ctrlrequest member wValue, wLength and wIndex are of type __le16,
conversion macro cpu_to_le16() input argument is __u16, so properly
typecasted to fix the cast from restricted __le16 warning.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/all/202209020044.CX2PfZzM-lkp@intel.com/Signed-off-by: Piyush Mehta <piyush.mehta@amd.com>
Link: https://lore.kernel.org/r/20230822063201.16929-3-piyush.mehta@amd.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb_ctrlrequest members wValue and wIndex are of type __le16, so to fix
this warnings we are using le16_to_cpu() macros.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/all/202209020044.CX2PfZzM-lkp@intel.com/Signed-off-by: Piyush Mehta <piyush.mehta@amd.com>
Link: https://lore.kernel.org/r/20230822063201.16929-2-piyush.mehta@amd.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If the controller is dead, the honest answer to the
question whether it has caused an irq is: unknown
As the purpose of the irq return is to trigger switching
off an IRQ, the correct response if you cannot
determine if your device has caused the interrupt is
IRQ_HANDLED
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20230822112455.18957-1-oneukum@suse.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If the serial device never reads data written to it (because it is "output
only") then the write buffers will still be waiting for the URB to complete
on close(), which will hang for 30s until the closing_wait timeout expires.

This can happen with the ESP32-H2/ESP32-C6 USB serial interface. Changing
the port closing_wait timeout is a privileged operation but flushing the
output buffer is not a privileged operation.

Implement the flush_buffer tty operation to cancel in-progress writes so
that tcflush(fd, TCOFLUSH) can be used to unblock the serial port before
close.
Signed-off-by: Simon Arlott <simon@octiron.net>
Link: https://lore.kernel.org/r/555fbc4c-043b-8932-fb9b-a208d61ffbe4@0882a8b5-c6c3-11e9-b005-00805fc181fe.uuid.home.arpaSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The current approach to handling DP on bridge-enabled platforms requires
a chain of DP bridges up to the USB-C connector. Register a last DRM
bridge for such chain.
Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230817150824.14371-3-dmitry.baryshkov@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In the embedded cases, the DisplayPort connector is handled by the TCPM
itself. It was proposed to add the "displayport" OF property to the DT
bindings, but it  was rejected in favour of properly describing the
electrical signal path using of_graph.

Fallback to the controller fwnode for HPD notifications to
support such usecases without requiring additional DT properties.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230817150824.14371-2-dmitry.baryshkov@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These declarations are not implemented anymore, remove them.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20230818124025.51576-1-yuehaibing@huawei.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unnecessary platform_set_drvdata(..., NULL) in ->remove(),
the driver_data will be cleared in device_unbind_cleanup() after
calling ->remove() in driver call code.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20230810134710.114356-1-yangyingliang@huawei.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dcd_change notification call moved outside of the acm->read_lock
to protect any future tty ldisc that calls wait_serial_change()
Signed-off-by: Dan Drown <dan-netdev@drown.org>
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/ZN1zV/zjPgpGlHXo@vps3.drown.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

According the "USB Type-C Port Controller Interface Specification v2.0"
the TCPC sets the fault status register bit-7
(AllRegistersResetToDefault) once the registers have been reset to
their default values.

This triggers an alert(-irq) on PTN5110 devices albeit we do mask the
fault-irq, which may cause a kernel hang. Fix this generically by writing
a one to the corresponding bit-7.

Cc: stable@vger.kernel.org
Fixes: 74e656d6 ("staging: typec: Type-C Port Controller Interface driver (tcpci)")
Reported-by: "Angus Ainslie (Purism)" <angus@akkea.ca>
Closes: https://lore.kernel.org/all/20190508002749.14816-2-angus@akkea.ca/Reported-by: Christian Bach <christian.bach@scs.ch>
Closes: https://lore.kernel.org/regressions/ZR0P278MB07737E5F1D48632897D51AC3EB329@ZR0P278MB0773.CHEP278.PROD.OUTLOOK.COM/t/Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230816172502.1155079-1-festevam@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Some usb hubs will negotiate DisplayPort Alt mode with the device
but will then negotiate a data role swap after entering the alt
mode. The data role swap causes the device to unregister all alt
modes, however the usb hub will still send Attention messages
even after failing to reregister the Alt Mode. type_altmode_attention
currently does not verify whether or not a device's altmode partner
exists, which results in a NULL pointer error when dereferencing
the typec_altmode and typec_altmode_ops belonging to the altmode
partner.

Verify the presence of a device's altmode partner before sending
the Attention message to the Alt Mode driver.

Fixes: 8a37d87d ("usb: typec: Bus type for alternate modes")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230814180559.923475-1-rdbabiera@google.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the module_led_trigger macro to simplify the code, which is the
same as declaring with module_init() and module_exit().
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Link: https://lore.kernel.org/r/20230815074648.1015175-1-lizetao1@huawei.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Device connected to usb otg port of GXL-based boards can not be
recognised after resumption, doesn't recover even if disconnect and
reconnect the device. dmesg shows it disconnects during resumption.

[   41.492911] usb 1-2: USB disconnect, device number 3
[   41.499346] usb 1-2: unregistering device
[   41.511939] usb 1-2: unregistering interface 1-2:1.0

Calling usb_post_init() will fix this issue, and it's tested and
verified on libretech's aml-s905x-cc board.

Cc: stable@vger.kernel.org # v5.8+
Fixes: c9999337 ("usb: dwc3: Add Amlogic G12A DWC3 glue")
Signed-off-by: Luke Lu <luke.lu@libre.computer>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230809212911.18903-1-luke.lu@libre.computerSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The correct compatible for Exynos5433 is "samsung,exynos5433-dwusb3".
Fix the typo in its usage.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Fixes: 949ea75b ("dt-bindings: usb: samsung,exynos-dwc3: convert to dtschema")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230816201123.3530-1-semen.protsenko@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The Exynos5433 DTSI had always different order of DWC USB3 controller
clocks than the binding.  The order in the binding was introduced in the
commit 949ea75b ("dt-bindings: usb: samsung,exynos-dwc3: convert to
dtschema") converting to DT schema.  The Linux driver does not care
about order and was always getting clocks by name.  Therefore assume the
DTS is the preferred order and correct the binding.

Fixes: 949ea75b ("dt-bindings: usb: samsung,exynos-dwc3: convert to dtschema")
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20230818102911.18388-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'thunderbolt-for-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next

Mika writes:

thunderbolt: Changes for v6.6 merge window

This includes following Thunderbolt/USB4 changes for the v6.6 merge
window:

  - Replace broken mailing list address in the ABI document
  - Small improvements.

All these have been in linux-next with no reported issues.

* tag 'thunderbolt-for-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
  Documentation/ABI: thunderbolt: Replace 01.org in contact
  thunderbolt: Check Intel vendor ID in tb_switch_get_generation()
  thunderbolt: Log a warning if device links are not found
  thunderbolt: Set variable tmu_params storage class specifier to static

We need the USB and Thunderbolt fixes in here to build on.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'kbuild-fixes-v6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Clear errno before calling getline()

 - Fix a modpost warning for ARCH=alpha

* tag 'kbuild-fixes-v6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  alpha: remove __init annotation from exported page_is_ram()
  scripts/kallsyms: Fix build failure by setting errno before calling getline()

Merge tag 'platform-drivers-x86-v6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform drivers fixes from Hans de Goede:

 -  lenovo-ymc driver causes keyboard + touchpad to not work with >= 6.4
    on some Thinkbook models, fix this

 -  A set of small fixes for mlx-platform

 -  Other small fixes and hw-id additions

* tag 'platform-drivers-x86-v6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: lenovo-ymc: Only bind on machines with a convertible DMI chassis-type
  platform: mellanox: Change register offset addresses
  platform: mellanox: mlx-platform: Modify graceful shutdown callback and power down mask
  platform: mellanox: mlx-platform: Fix signals polarity and latch mask
  platform: mellanox: Fix order in exit flow
  platform/x86: ISST: Reduce noise for missing numa information in logs
  platform/x86: msi-ec: Fix the build
  ACPI: scan: Create platform device for CS35L56
  platform/x86/amd/pmf: Fix unsigned comparison with less than zero

Pull SCSI fixes from James Bottomley:
 "Eleven small fixes, ten in drivers.

  Of the two fixes marked core, one is in the raid helper class (used by
  some raid device drivers) and the other one is the /proc/scsi/scsi
  parsing fix for potential reads beyond the end of the buffer"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qedf: Fix firmware halt over suspend and resume
  scsi: qedi: Fix firmware halt over suspend and resume
  scsi: qedi: Fix potential deadlock on &qedi_percpu->p_work_lock
  scsi: lpfc: Remove reftag check in DIF paths
  scsi: ufs: renesas: Fix private allocation
  scsi: snic: Fix possible memory leak if device_add() fails
  scsi: core: Fix possible memory leak if device_add() fails
  scsi: core: Fix legacy /proc parsing buffer overflow
  scsi: 53c700: Check that command slot is not NULL
  scsi: fnic: Replace return codes in fnic_clean_pending_aborts()
  scsi: storvsc: Fix handling of virtual Fibre Channel timeouts

The lenovo-ymc driver is causing the keyboard + touchpad to stop working
on some regular laptop models such as the Lenovo ThinkBook 13s G2 ITL 20V9.

The problem is that there are YMC WMI GUID methods in the ACPI tables
of these laptops, despite them not being Yogas and lenovo-ymc loading
causes libinput to see a SW_TABLET_MODE switch with state 1.

This in turn causes libinput to ignore events from the builtin keyboard
and touchpad, since it filters those out for a Yoga in tablet mode.

Similar issues with false-positive SW_TABLET_MODE=1 reporting have
been seen with the intel-hid driver.

Copy the intel-hid driver approach to fix this and only bind to the WMI
device on machines where the DMI chassis-type indicates the machine
is a convertible.

Add a 'force' module parameter to allow overriding the chassis-type check
so that users can easily test if the YMC interface works on models which
report an unexpected chassis-type.

Fixes: e82882cd ("platform/x86: Add driver for Yoga Tablet Mode switch")
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2229373
Cc: André Apitzsch <git@apitzsch.eu>
Cc: stable@vger.kernel.org
Tested-by: Andrew Kallmeyer <kallmeyeras@gmail.com>
Tested-by: Gergő Köteles <soyer@irl.hu>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230812144818.383230-1-hdegoede@redhat.com

Move debug register offsets to different location due to hardware changes.

Fixes: dd635e33 ("platform: mellanox: Introduce support of new Nvidia L1 switch")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230813083735.39090-5-vadimp@nvidia.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Use kernel_power_off() instead of kernel_halt() to pass through
machine_power_off() -> pm_power_off(), otherwise axillary power does
not go off.

Change "power down" bitmask.

Fixes: dd635e33 ("platform: mellanox: Introduce support of new Nvidia L1 switch")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230813083735.39090-4-vadimp@nvidia.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Change polarity of chassis health and power signals and fix latch reset
mask for L1 switch.

Fixes: dd635e33 ("platform: mellanox: Introduce support of new Nvidia L1 switch")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230813083735.39090-3-vadimp@nvidia.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Fix exit flow order: call mlxplat_post_exit() after
mlxplat_i2c_main_exit() in order to unregister main i2c driver before
to "mlxplat" driver.

Fixes: 0170f616 ("platform: mellanox: Split initialization procedure")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230813083735.39090-2-vadimp@nvidia.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Pull btrfs fixes from David Sterba:
 "More fixes, some of them going back to older releases and there are
  fixes for hangs in stress tests regarding space caching:

   - fixes and progress tracking for hangs in free space caching, found
     by test generic/475

   - writeback fixes, write pages in integrity mode and skip writing
     pages that have been written meanwhile

   - properly clear end of extent range after an error

   - relocation fixes:
      - fix race betwen qgroup tree creation and relocation
      - detect and report invalid reloc roots"

* tag 'for-6.5-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: set cache_block_group_error if we find an error
  btrfs: reject invalid reloc tree root keys with stack dump
  btrfs: exit gracefully if reloc roots don't match
  btrfs: avoid race between qgroup tree creation and relocation
  btrfs: properly clear end of the unreserved range in cow_file_range
  btrfs: don't wait for writeback on clean pages in extent_write_cache_pages
  btrfs: don't stop integrity writeback too early
  btrfs: wait for actual caching progress during allocation

Pull gpio fixes from Bartosz Golaszewski:

 - mark virtual chips exposed by gpio-sim as ones that can sleep
   (callbacks must not be called from interrupt context)

 - fix an off-by-one error in gpio-ws16c48

* tag 'gpio-fixes-for-v6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: ws16c48: Fix off-by-one error in WS16C48 resource region extent
  gpio: sim: mark the GPIO chip as a one that can sleep

The only remaining consumer is new_inode, where it showed up in 2001 as
commit c37fa164 ("v2.4.9.9 -> v2.4.9.10") in a historical repo [1]
with a changelog which does not mention it.

Since then the line got only touched up to keep compiling.

While it may have been of benefit back in the day, it is guaranteed to
at best not get in the way in the multicore setting -- as the code
performs *a lot* of work between the prefetch and actual lock acquire,
any contention means the cacheline is already invalid by the time the
routine calls spin_lock().  It adds spurious traffic, for short.

On top of it prefetch is notoriously tricky to use for single-threaded
purposes, making it questionable from the get go.

As such, remove it.

I admit upfront I did not see value in benchmarking this change, but I
can do it if that is deemed appropriate.

Removal from new_inode and of the entire thing are in the same patch as
requested by Linus, so whatever weird looks can be directed at that guy.

Link: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/fs/inode.c?id=c37fa164f793735b32aa3f53154ff1a7659e6442 [1]
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull char / misc driver fixes from Greg KH:
 "Here are some small char/misc driver fixes for 6.5-rc6 that resolve
  some reported issues. Included in here are:

   - bunch of iio driver fixes for reported problems

   - interconnect driver fixes

   - counter driver build fix

   - cardreader driver fixes

   - binder driver fixes

   - other tiny driver fixes

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'char-misc-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
  misc: tps6594-esm: Disable ESM for rev 1 PMIC
  misc: rtsx: judge ASPM Mode to set PETXCFG Reg
  binder: fix memory leak in binder_init()
  iio: cros_ec: Fix the allocation size for cros_ec_command
  tools/counter: Makefile: Replace rmdir by rm to avoid make,clean failure
  iio: imu: lsm6dsx: Fix mount matrix retrieval
  iio: adc: meson: fix core clock enable/disable moment
  iio: core: Prevent invalid memory access when there is no parent
  iio: frequency: admv1013: propagate errors from regulator_get_voltage()
  counter: Fix menuconfig "Counter support" submenu entries disappearance
  dt-bindings: iio: adi,ad74115: remove ref from -nanoamp
  iio: adc: ina2xx: avoid NULL pointer dereference on OF device match
  iio: light: bu27008: Fix intensity data type
  iio: light: bu27008: Fix scale format
  iio: light: bu27034: Fix scale format
  iio: adc: ad7192: Fix ac excitation feature
  interconnect: qcom: sa8775p: add enable_mask for bcm nodes
  interconnect: qcom: sm8550: add enable_mask for bcm nodes
  interconnect: qcom: sm8450: add enable_mask for bcm nodes
  interconnect: qcom: Add support for mask-based BCMs
  ...