- 15 May, 2017 21 commits
-
-
Johan Hovold authored
commit b631433b upstream. Fix open error handling which failed to detect errors when reading the MSR and LSR registers, something which could lead to the shadow registers being initialised from errnos. Note that calling the generic close implementation is sufficient in the error paths as the interrupt urb has not yet been submitted and the register updates have not been made. Fixes: f4c1e8d5 ("USB: ark3116: Make existing functions 16450-aware and add close and release functions.") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit 39712e8b upstream. Make sure to detect and return an error on zero-length control-message transfers when reading from the device. This addresses a potential failure to detect an empty transmit buffer during close. Also remove a redundant check for short transfer when sending a command. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit e4457d97 upstream. Use a dedicated buffer for the DMA transfer and make sure to detect short transfers to avoid parsing a corrupt descriptor. Fixes: 6e8cf775 ("USB: add EPIC support to the io_edgeport driver") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit 1eac5c24 upstream. Make sure to detect short control-message transfers rather than continue with zero-initialised data when retrieving modem status and during device initialisation. Fixes: 52af9545 ("USB: add USB serial ssu100 driver") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit 1b0aed2b upstream. Make sure the received data has the required headers before parsing it. Also drop the redundant urb-status check, which has already been handled by the caller. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit c528fcb1 upstream. Make sure to check for short transfers before parsing the receive buffer to avoid acting on stale data. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Krzysztof Kozlowski authored
commit 68bd6fc3 upstream. Returning from for_each_available_child_of_node() loop requires cleaning up node refcount. Error paths lacked it so for example in case of deferred probe, the refcount of phy node was left increased. Fixes: 6d40500a ("usb: ehci/ohci-exynos: Fix of_node_put() for child when getting PHYs") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Krzysztof Kozlowski authored
commit 3f6026b1 upstream. Returning from for_each_available_child_of_node() loop requires cleaning up node refcount. Error paths lacked it so for example in case of deferred probe, the refcount of phy node was left increased. Fixes: 6d40500a ("usb: ehci/ohci-exynos: Fix of_node_put() for child when getting PHYs") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jim Mattson authored
commit 0b4c208d upstream. This reverts commit bc613494. A CPUID instruction executed in VMX non-root mode always causes a VM-exit, regardless of the leaf being queried. Fixes: bc613494 ("KVM: nested VMX: disable perf cpuid reporting") Signed-off-by: Jim Mattson <jmattson@google.com> [The issue solved by bc613494 has been resolved with ff651cb6 ("KVM: nVMX: Add nested msr load/restore algorithm").] Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andy Shevchenko authored
commit 80354c29 upstream. The interrupt line used for the watchdog is 12, according to the official Intel Edison BSP code. And indeed after fixing it we start getting an interrupt and thus the watchdog starts working again: [ 191.699951] Kernel panic - not syncing: Kernel Watchdog Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: David Cohen <david.a.cohen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 78a3bb9e ("x86: intel-mid: add watchdog platform code for Merrifield") Link: http://lkml.kernel.org/r/20170312150744.45493-1-andriy.shevchenko@linux.intel.comSigned-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Masami Hiramatsu authored
commit 75013fb1 upstream. Fix to the exception table entry check by using probed address instead of the address of copied instruction. This bug may cause unexpected kernel panic if user probe an address where an exception can happen which should be fixup by __ex_table (e.g. copy_from_user.) Unless user puts a kprobe on such address, this doesn't cause any problem. This bug has been introduced years ago, by commit: 46484688 ("x86/kprobes: Fix a bug which can modify kernel code permanently"). Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 46484688 ("x86/kprobes: Fix a bug which can modify kernel code permanently") Link: http://lkml.kernel.org/r/148829899399.28855.12581062400757221722.stgit@devboxSigned-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nikola Pajkovsky authored
commit 68dee8e2 upstream. commit 8fd524b3 ("x86: Kill bad_dma_address variable") has killed bad_dma_address variable and used instead of macro DMA_ERROR_CODE which is always zero. Since dma_addr is unsigned, the statement dma_addr >= DMA_ERROR_CODE is always true, and not needed. arch/x86/kernel/pci-calgary_64.c: In function ‘iommu_free’: arch/x86/kernel/pci-calgary_64.c:299:2: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] if (unlikely((dma_addr >= DMA_ERROR_CODE) && (dma_addr < badend))) { Fixes: 8fd524b3 ("x86: Kill bad_dma_address variable") Signed-off-by: Nikola Pajkovsky <npajkovsky@suse.cz> Cc: iommu@lists.linux-foundation.org Cc: Jon Mason <jdmason@kudzu.us> Cc: Muli Ben-Yehuda <mulix@mulix.org> Link: http://lkml.kernel.org/r/7612c0f9dd7c1290407dbf8e809def922006920b.1479161177.git.npajkovsky@suse.czSigned-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ganapathi Bhat authored
commit a5b60de6 upstream. This patch fixes the issue specific to AP. AP is started with WEP security and external station is connected to it. Data path works in this case. Now if AP is restarted with WPA/WPA2 security, station is able to connect but ping fails. Driver skips the deletion of WEP keys if interface type is AP. Removing that redundant check resolves the issue. Fixes: e57f1734 ("mwifiex: add key material v2 support") Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Brian Norris authored
commit 6183468a upstream. Similar to commit fcd2042e ("mwifiex: printk() overflow with 32-byte SSIDs"), we failed to account for the existence of 32-char SSIDs in our debugfs code. Unlike in that case though, we zeroed out the containing struct first, and I'm pretty sure we're guaranteed to have some padding after the 'ssid.ssid' and 'ssid.ssid_len' fields (the struct is 33 bytes long). So, this is the difference between: # cat /sys/kernel/debug/mwifiex/mlan0/info ... essid="0123456789abcdef0123456789abcdef " ... and the correct output: # cat /sys/kernel/debug/mwifiex/mlan0/info ... essid="0123456789abcdef0123456789abcdef" ... Fixes: 5e6e3a92 ("wireless: mwifiex: initial commit for Marvell mwifiex driver") Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Liam Breck authored
commit e05ad7e0 upstream. pm_resume() does a register_reset() which clears charger host mode. Fix by calling set_mode_host() after the reset. Fixes: d7bf353f ("bq24190_charger: Add support for TI BQ24190 Battery Charger") Signed-off-by: Liam Breck <kernel@networkimprov.net> Acked-by: Mark Greer <mgreer@animalcreek.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Liam Breck authored
commit 767eee36 upstream. The interrupt signal is TRIGGER_FALLING. This is is specified in the data sheet PIN FUNCTIONS: "The INT pin sends active low, 256us pulse to host to report charger device status and fault." Also the direction can be seen in the data sheet Figure 37 "BQ24190 with D+/D- Detection and USB On-The-Go (OTG)" which shows a 10k pull-up resistor installed for the sample configurations. Fixes: d7bf353f ("bq24190_charger: Add support for TI BQ24190 Battery Charger") Signed-off-by: Liam Breck <kernel@networkimprov.net> Acked-by: Mark Greer <mgreer@animalcreek.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael Ellerman authored
commit a7e0fb6c upstream. Currently the opal_exit tracepoint usually shows the opcode as 0: <idle>-0 [047] d.h. 635.654292: opal_entry: opcode=63 <idle>-0 [047] d.h. 635.654296: opal_exit: opcode=0 retval=0 kopald-1209 [019] d... 636.420943: opal_entry: opcode=10 kopald-1209 [019] d... 636.420959: opal_exit: opcode=0 retval=0 This is because we incorrectly load the opcode into r0 before calling __trace_opal_exit(), whereas it expects the opcode in r3 (first function parameter). In fact we are leaving the retval in r3, so opcode and retval will always show the same value. Instead load the opcode into r3, resulting in: <idle>-0 [040] d.h. 636.618625: opal_entry: opcode=63 <idle>-0 [040] d.h. 636.618627: opal_exit: opcode=63 retval=0 Fixes: c49f6353 ("powernv: Add OPAL tracepoints") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ben Hutchings authored
commit 4cca0457 upstream. The switch that conditionally sets CPUPOWER_CAP_HAS_TURBO_RATIO and CPUPOWER_CAP_IS_SNB flags is missing a break, so all cores get both flags set and an assumed base clock of 100 MHz for turbo values. Reported-by: GSR <gsr.bugs@infernal-iceberg.com> Tested-by: GSR <gsr.bugs@infernal-iceberg.com> References: https://bugs.debian.org/859978 Fixes: 8fb2e440 (cpupower: Show Intel turbo ratio support via ...) Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
commit d09957fb upstream. The cfi_staa_write_buffers function uses a large amount of kernel stack whenever CONFIG_MTD_MAP_BANK_WIDTH_32 is set, and that results in a warning on ARM allmodconfig builds: drivers/mtd/chips/cfi_cmdset_0020.c: In function 'cfi_staa_write_buffers': drivers/mtd/chips/cfi_cmdset_0020.c:651:1: warning: the frame size of 1208 bytes is larger than 1024 bytes [-Wframe-larger-than=] It turns out that this is largely a result of a suboptimal implementation of map_word_andequal(). Replacing this function with a straightforward one reduces the stack size in this function by exactly 200 bytes, shrinks the .text segment for this file from 27648 bytes to 26608 bytes, and makes the warning go away. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
commit ffb6e0c9 upstream. The platform_sysrq_reset_seq code was intended as a way for an embedded platform to provide its own sysrq sequence at compile time. After over two years, nobody has started using it in an upstream kernel, and the platforms that were interested in it have moved on to devicetree, which can be used to configure the sequence without requiring kernel changes. The method is also incompatible with the way that most architectures build support for multiple platforms into a single kernel. Now the code is producing warnings when built with gcc-5.1: drivers/tty/sysrq.c: In function 'sysrq_init': drivers/tty/sysrq.c:959:33: warning: array subscript is above array bounds [-Warray-bounds] key = platform_sysrq_reset_seq[i]; We could fix this, but it seems unlikely that it will ever be used, so let's just remove the code instead. We still have the option to pass the sequence either in DT, using the kernel command line, or using the /sys/module/sysrq/parameters/reset_seq file. Fixes: 154b7a48 ("Input: sysrq - allow specifying alternate reset sequence") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Cong Wang authored
commit b5c66bab upstream. posix_acl_update_mode() could possibly clear 'acl', if so we leak the memory pointed by 'acl'. Save this pointer before calling posix_acl_update_mode() and release the memory if 'acl' really gets cleared. Link: http://lkml.kernel.org/r/1486678332-2430-1-git-send-email-xiyou.wangcong@gmail.comSigned-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reported-by: Mark Salyzyn <salyzyn@android.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Greg Kurz <groug@kaod.org> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Ron Minnich <rminnich@sandia.gov> Cc: Latchesar Ionkov <lucho@ionkov.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 08 May, 2017 19 commits
-
-
Greg Kroah-Hartman authored
-
Adrian Salido authored
commit 4617f564 upstream. When calling a dm ioctl that doesn't process any data (IOCTL_FLAGS_NO_PARAMS), the contents of the data field in struct dm_ioctl are left initialized. Current code is incorrectly extending the size of data copied back to user, causing the contents of kernel stack to be leaked to user. Fix by only copying contents before data and allow the functions processing the ioctl to override. Signed-off-by: Adrian Salido <salidoa@google.com> Reviewed-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Masahiro Yamada authored
commit de461993 upstream. If "make kvmconfig" is run with "-j" option, a warning message, "jobserver unavailable: using -j1. Add `+' to parent make rule.", is displayed. $ make -s defconfig *** Default configuration is based on 'x86_64_defconfig' # # configuration written to .config # $ make -j8 kvmconfig Using ./.config as base Merging ./arch/x86/configs/kvm_guest.config [ snip ] # # merged configuration written to ./.config (needs make) # make[2]: warning: jobserver unavailable: using -j1. Add `+' to parent make rule. scripts/kconfig/conf --oldconfig Kconfig [ snip ] # # configuration written to .config # Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
Picked from commit 287980e4 ("remove lots of IS_ERR_VALUE abuses") upstream. The original fix that was backported to 3.18 already addressed the warning in some configurations, but not in others, leaving us with the same output: ../fs/gfs2/dir.c: In function 'get_first_leaf': ../fs/gfs2/dir.c:768:9: warning: 'leaf_no' may be used uninitialized in this function [-Wmaybe-uninitialized] error = get_leaf(dip, leaf_no, bh_out); ^ ../fs/gfs2/dir.c: In function 'dir_split_leaf.isra.20': ../fs/gfs2/dir.c:987:8: warning: 'leaf_no' may be used uninitialized in this function [-Wmaybe-uninitialized] This takes the approach that we took in later versions in mainline, but does not backport the entire patch, as that would be too large for stable and IIRC caused regressions in other drivers. Fixes: 9d46d31e ("gfs2: avoid uninitialized variable warning") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jeff Kirsher authored
commit 30544af5 upstream. We were using s64 for lat_ns (latency nano-second value) since in our calculations a negative value could be a resultant. For negative values, we then assign lat_ns to be zero, so the value passed to do_div() was never negative, but do_div() expects the argument type to be u64, so do a cast to resolve a compile warning seen on PowerPC. CC: Yanjiang Jin <yanjiang.jin@windriver.com> CC: Yanir Lubetkin <yanirx.lubetkin@intel.com> Reported-by: Yanjiang Jin <yanjiang.jin@windriver.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rusty Russell authored
commit f36963c9 upstream. da91309e (cpumask: Utility function to set n'th cpu...) created a genuinely weird function. I never saw it before, it went through DaveM. (He only does this to make us other maintainers feel better about our own mistakes.) cpumask_set_cpu_local_first's purpose is say "I need to spread things across N online cpus, choose the ones on this numa node first"; you call it in a loop. It can fail. One of the two callers ignores this, the other aborts and fails the device open. It can fail in two ways: allocating the off-stack cpumask, or through a convoluted codepath which AFAICT can only occur if cpu_online_mask changes. Which shouldn't happen, because if cpu_online_mask can change while you call this, it could return a now-offline cpu anyway. It contains a nonsensical test "!cpumask_of_node(numa_node)". This was drawn to my attention by Geert, who said this causes a warning on Sparc. It sets a single bit in a cpumask instead of returning a cpu number, because that's what the callers want. It could be made more efficient by passing the previous cpu rather than an index, but that would be more invasive to the callers. [backporting for 3.18: only two callers exist, otherwise no change. The same warning shows up for "!cpumask_of_node()", and I thought about just addressing the warning, but using the whole fix seemed better in the end as one of the two callers also lacks the error handling] Fixes: da91309e Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (then rebased) Tested-by: Amir Vadai <amirv@mellanox.com> Acked-by: Amir Vadai <amirv@mellanox.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paul Gortmaker authored
commit 4a3893d0 upstream. Currently an allyesconfig build [gcc-4.9.1] can generate the following: WARNING: vmlinux.o(.text.unlikely+0x3864): Section mismatch in reference from the function cpumask_empty.constprop.3() to the variable .init.data:nmi_ipi_mask which comes from the cpumask_empty usage in arch/x86/kernel/nmi_selftest.c. Normally we would not see a symbol entry for cpumask_empty since it is: static inline bool cpumask_empty(const struct cpumask *srcp) however in this case, the variant of the symbol gets emitted when GCC does constant propagation optimization. Fix things up so that any locally optimized constprop variants don't warn when accessing variables that live in the __init sections. [arnd: adapted text_sections definition to 3.18] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paul Gortmaker authored
commit 09c20c03 upstream. Currently the match() function supports a leading * to match any prefix and a trailing * to match any suffix. However there currently is not a combination of both that can be used to target matches of whole families of functions that share a common substring. Here we expand the *foo and foo* match to also support *foo* with the goal of targeting compiler generated symbol names that contain strings like ".constprop." and ".isra." Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
The advansys driver was converted to the proper DMA API in linux-4.2, but the 3.18-stable kernel still warns about this: drivers/scsi/advansys.c:71:2: warning: #warning this driver is still not properly converted to the DMA API [-Wcpp] The warning clearly is not helpful in 3.18 any more, it just clutters up the build log. This removes the warning instead, and clarifies the comment above it. Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
We get a warning about a broken pointer conversion on 64-bit architectures: drivers/message/i2o/i2o_config.c: In function 'i2o_cfg_passthru': drivers/message/i2o/i2o_config.c:893:19: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] (p->virt, (void __user *)sg[i].addr_bus, ^ drivers/message/i2o/i2o_config.c:953:10: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] ((void __user *)sg[j].addr_bus, sg_list[j].virt, ^ This has clearly never worked right, so we can add an #ifdef around the code. The driver was moved to staging in linux-4.0 and finally removed in 4.2, so upstream does not have a fix for it. The driver originally got this mostly right, though probably by accident. Fixes: f4c2c15b ("[PATCH] Convert i2o to compat_ioctl") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Benjamin Romer authored
commit f84bd626 upstream. Properly handle the return value from queue_delayed_work() - it's a bool, not an int, so using a less than comparison isn't appropriate. This mistake was found by David Binderman <dcb314@hotmail.com>. [arnd: the fix is from 4.4 but needed some minor fixup to adapt to context changes] Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Ralf Baechle authored
commit 2d76e963 upstream. HOSTCC arch/mips/boot/elf2ecoff arch/mips/boot/elf2ecoff.c: In function ‘main’: arch/mips/boot/elf2ecoff.c:271:8: warning: variable ‘shstrtab’ set but not used [-Wunused-but-set-variable] char *shstrtab; Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ralf Baechle authored
commit 26f7c4bd upstream. These are generated by very recent toolchains and result in an error message when attenpting to convert a kernel from ELF to ECOFF. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
kernelci found build error on the 3.18 stable tree that don't show up in later versions: arch/mips/jz4740/irq.h:21:38: error: 'struct irq_data' declared inside parameter list will not be visible outside of this definition or declaration [-Werror] arch/mips/jz4740/irq.h:20:39: error: 'struct irq_data' declared inside parameter list will not be visible outside of this definition or declaration [-Werror] include/linux/irqdesc.h:92:33: error: 'NR_IRQS' undeclared here (not in a function) arch/mips/jz4740/irq.c:91:41: error: 'JZ4740_IRQ_BASE' undeclared (first use in this function) arch/mips/jz4740/irq.c:68:6: error: conflicting types for 'jz4740_irq_resume' arch/mips/jz4740/irq.c:62:6: error: conflicting types for 'jz4740_irq_suspend' arch/mips/jz4740/irq.c:49:39: error: 'JZ4740_IRQ_BASE' undeclared (first use in this function) arch/mips/jz4740/gpio.c:47:32: error: initializer element is not constant arch/mips/jz4740/gpio.c:46:32: error: initializer element is not constant arch/mips/jz4740/gpio.c:45:32: error: initializer element is not constant arch/mips/jz4740/gpio.c:44:32: error: initializer element is not constant arch/mips/jz4740/gpio.c:447:22: error: assignment from incompatible pointer type [-Werror=incompatible-pointer-types] arch/mips/jz4740/gpio.c:446:23: error: assignment from incompatible pointer type [-Werror=incompatible-pointer-types] arch/mips/jz4740/gpio.c:427:14: error: implicit declaration of function 'JZ4740_IRQ_INTC_GPIO' [-Werror=implicit-function-declaration] arch/mips/jz4740/gpio.c:269:9: error: implicit declaration of function 'JZ4740_IRQ_GPIO' [-Werror=implicit-function-declaration] The problem seems to be caused by commit 83bc7692 ("MIPS: JZ4740: Use generic irq chip") from linux-3.2, but only showed up in a defconfig build when qi_lb60_defconfig was added in linux-3.13 and that configuration never successfully built. The code has changed in a number of ways before 4.4, which builds fine. While I did not bisect the problem to a specific change, I found a simple fix by including the obviously missing header. Cc: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Stephen Rothwell authored
commit badbda53 upstream. pageblock_order can be (at least) an unsigned int or an unsigned long depending on the kernel config and architecture, so use max_t(unsigned long, ...) when comparing it. fixes these warnings: In file included from include/asm-generic/bug.h:13:0, from arch/powerpc/include/asm/bug.h:127, from include/linux/bug.h:4, from include/linux/mmdebug.h:4, from include/linux/mm.h:8, from include/linux/memblock.h:18, from mm/cma.c:28: mm/cma.c: In function 'cma_init_reserved_mem': include/linux/kernel.h:748:17: warning: comparison of distinct pointer types lacks a cast (void) (&_max1 == &_max2); ^ mm/cma.c:186:27: note: in expansion of macro 'max' alignment = PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order); ^ mm/cma.c: In function 'cma_declare_contiguous': include/linux/kernel.h:748:17: warning: comparison of distinct pointer types lacks a cast (void) (&_max1 == &_max2); ^ include/linux/kernel.h:747:9: note: in definition of macro 'max' typeof(y) _max2 = (y); ^ mm/cma.c:270:29: note: in expansion of macro 'max' (phys_addr_t)PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order)); ^ include/linux/kernel.h:748:17: warning: comparison of distinct pointer types lacks a cast (void) (&_max1 == &_max2); ^ include/linux/kernel.h:747:21: note: in definition of macro 'max' typeof(y) _max2 = (y); ^ mm/cma.c:270:29: note: in expansion of macro 'max' (phys_addr_t)PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order)); ^ [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20160526150748.5be38a4f@canb.auug.org.auSigned-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
commit 54309784 upstream. On a cross-toolchain without glibc support, libgcov may not be available, and attempting to build an arm64 kernel with GCOV enabled then results in a build error: /home/arnd/cross-gcc/lib/gcc/aarch64-linux/5.2.1/../../../../aarch64-linux/bin/ld: cannot find -lgcov We don't really want to link libgcov into the vdso anyway, so this patch just disables GCOV in the vdso directory, just as we do for most other architectures. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
commit 3e7a8716 upstream. Not all architectures are able to call __builtin_return_address(). On ARM, the mISDN code produces this warning: hardware/mISDN/w6692.c: In function 'w6692_dctrl': hardware/mISDN/w6692.c:1181:75: warning: unsupported argument to '__builtin_return_address' pr_debug("%s: %s dev(%d) open from %p\n", card->name, __func__, ^ hardware/mISDN/mISDNipac.c: In function 'open_dchannel': hardware/mISDN/mISDNipac.c:759:75: warning: unsupported argument to '__builtin_return_address' pr_debug("%s: %s dev(%d) open from %p\n", isac->name, __func__, ^ In a lot of cases, this is relatively easy to work around by passing the value of __builtin_return_address(0) from the callers into the functions that want it. One exception is the indirect 'open' function call in struct isac_hw. While it would be possible to fix this as well, this patch only addresses the other callers properly and lets this one return the direct parent function, which should be good enough. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
James Bottomley authored
commit e03c2da6 upstream. non-x86 builds want the #warning in the IPS code about compiling on the wrong architecture removed because it keeps triggering on their platforms build farms. Transform from a compile time warning into a runtime one with taint to preserve the original intent of the authors. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: James Bottomley <JBottomley@Odin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
commit 7835bfb5 upstream. The return type of find_first_bit() is architecture specific, on ARM it is 'unsigned int', while the asm-generic code used on x86 and a lot of other architectures returns 'unsigned long'. When building the mlx5 driver on ARM, we get a warning about this: infiniband/hw/mlx5/mem.c: In function 'mlx5_ib_cont_pages': infiniband/hw/mlx5/mem.c:84:143: warning: comparison of distinct pointer types lacks a cast m = min(m, find_first_bit(&tmp, sizeof(tmp))); This patch changes the driver to use min_t to make it behave the same way on all architectures. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-