- 07 Jul, 2011 8 commits
-
-
Hans Verkuil authored
The tuner ops g_frequency, g_tuner and s_tuner require that the tuner type field is filled in. Document this. The tuner-core doc is based on a patch from Mauro Carvalho Chehab <mchehab@redhat.com>. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
s_mode is no longer used, so remove it. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Radio devices have weird side-effects when used with combined TV/radio tuners and the V4L2 spec is ambiguous on how it should work. This results in inconsistent driver behavior which makes life hard for everyone. Be more strict in when and how the switch between radio and tv mode takes place and make sure all drivers behave the same. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Fix typo: g_tuner should have been s_tuner. Tested with a bttv card. Cc: stable@kernel.org Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
The tuner-core subdev requires that the type field of v4l2_tuner is filled in correctly. This is done in v4l2-ioctl.c, but pvrusb2 doesn't use that yet, so we have to do it manually based on whether the current input is radio or not. Tested with my pvrusb2. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Acked-by:
Mike Isely <isely@pobox.com> Cc: stable@kernel.org Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
The subdevs are supposed to receive a valid tuner type for the g_frequency and g/s_tuner subdev ops. Some drivers do this, others don't. So prefill this in v4l2-ioctl.c based on whether the device node from which this is called is a radio node or not. The spec does not require applications to fill in the type, and if they leave it at 0 then the 'check_mode' call in tuner-core.c will return an error and the ioctl does nothing. Cc: stable@kernel.org Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
set_mode is called with t->type, which is the tuner type. Instead, use t->mode which is the actual tuner mode (i.e. radio vs tv). Cc: stable@kernel.org Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Both s_std and s_tuner are broken because set_mode_freq is called before the new std (for s_std) and audmode (for s_tuner) are set. This patch splits set_mode_freq in a set_mode and a set_freq and in s_std/s_tuner first calls set_mode, and if that returns 0 (i.e. the mode is supported) then they set t->std/t->audmode and call set_freq. This fixes a bug where changing std or audmode would actually change it to the previous value. Discovered while testing analog TV standards for cx18 with a tda18271 tuner. Cc: stable@kernel.org Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
- 01 Jul, 2011 22 commits
-
-
Jarod Wilson authored
Due to commit cdda911c, evdev only becomes readable when the buffer contains an EV_SYN/SYN_REPORT event. If we get a repeat or a scancode we don't have a mapping for, we never call input_sync, and thus those events don't get reported in a timely fashion. For example, take an mceusb transceiver with a default rc6 keymap. Press buttons on an rc5 remote while monitoring with ir-keytable, and you'll see nothing. Now press a button on the rc6 remote matching the keymap. You'll suddenly get the rc5 key scancodes, the rc6 scancode and the rc6 key spit out all at the same time. Pressing and holding a button on a remote we do have a keymap for also works rather unreliably right now, due to repeat events also happening without a call to input_sync (we bail from ir_do_keydown before getting to the point where it calls input_sync). Easy fix though, just add two strategically placed input_sync calls right after our input_event calls for EV_MSC, and all is well again. Technically, we probably should have been doing this all along, its just that it never caused any functional difference until the referenced change went into the input layer. input_sync once per IR signal. There was another hidden bug in the code where we were calling input_report_key using last_keycode instead of our just discovered keycode, which manifested with the reordering of calling input_report_key and setting last_keycode. Reported-by:
Stephan Raue <sraue@openelec.tv> CC: Stephan Raue <sraue@openelec.tv> CC: Mauro Carvalho Chehab <mchehab@redhat.com> CC: Jeff Brown <jeffbrown@android.com> Acked-by:
Dmitry Torokhov <dtor@mail.ru> Signed-off-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jarod Wilson authored
While 0xffdc devices have their IR protocol hard-coded into the firmware of the device, we have no known way of telling what it is if we don't have the device's config byte already in the driver. Unknown devices default to the imon native protocol, but might actually be rc6, so we should set the driver up such that the user can load the rc6 keytable from userspace and still have a working device ahead of its config byte being added to the driver. Signed-off-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jarod Wilson authored
Another device with the 0xffdc device id, this one with 0x7e in the config byte. Its an iMON VFD + RC6 IR, in a CoolerMaster 260 case. Reported-by:
Filip Streibl <filip@streibl.cz> Signed-off-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jarod Wilson authored
The comment says "wait 15ms", but the code says jiffies_to_msecs(15) instead of msecs_to_jiffies(15). Fix that. Tested, works fine with both rc5 and rc6 decode, in-kernel and via lirc userspace, with an HVR-1150. Signed-off-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jarod Wilson authored
With hardware that has to use ir_raw_event_store_edge to collect IR sample durations, we were not doing an event reset unless IR_MAX_DURATION had passed. That's around 4 seconds. So if someone presses up, then down, with less than 4 seconds in between, they'd get the initial up, then up and down upon pressing down. To fix this, I've lowered the "send a reset event" logic's threshold to the input device's REP_DELAY (defaults to 500ms), and with an saa7134-based GPIO-driven IR receiver in a Hauppauge HVR-1150, I get *much* better behavior out of the remote now. Special thanks to Devin for providing the hardware to investigate this issue. CC: stable@kernel.org CC: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jarod Wilson authored
There's really no good reason not to just grab the desired IRQ at driver init time, instead of every time the lirc device node is accessed. This also improves the speed and reliability with which a serial transmitter can operate, as back-to-back transmission attempts (i.e., channel change to a multi-digit channel) don't have to spend time acquiring and then releasing the IRQ for every digit, sometimes multiple times, if lircd has been told to use the min_repeat parameter. CC: devel@driverdev.osuosl.org Signed-off-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jarod Wilson authored
We were calling schedule_timeout with the rx thread's task state still at TASK_RUNNING, which it shouldn't be. Make sure we call set_current_state(TASK_INTERRUPTIBLE) *before* schedule_timeout, and we're all good here. I believe this problem was mistakenly introduced in commit 5bd6b046, and I'm not sure how I missed it before, as I swear I tested the patchset that was included in, but alas, stuff happens... Acked-by:
Andy Walls <awalls@md.metrocast.net> CC: stable@kernel.org Signed-off-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jarod Wilson authored
Both consumers of RC_MAP_PINNACLE_PCTV_HD send along full RC-5 scancodes, so this update makes this keymap actually *have* full scancodes, heisted from rc-dib0700-rc5.c. This should fix out of the box remote functionality for the Pinnacle PCTV HD 800i (cx88 pci card) and PCTV HD Pro 801e (em28xx usb stick). CC: stable@kernel.org Signed-off-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jarod Wilson authored
Thanks to the intrepid testing and debugging of Matthijs van Drunen, it was uncovered that at least some variants of the ITE8709 need to use pnp resource 2, rather than 0, for things to function properly. Resource 0 has a length of only 1, and if you try to bypass the pnp_port_len check and use it anyway (with either a length of 1 or 2), the system in question's trackpad ceased to function. The circa lirc 0.8.7 lirc_ite8709 driver used resource 2, but the value was (amusingly) changed to 0 by way of a patch from ITE themselves, so I don't know if there may be variants where 0 actually *is* correct, but at least in this case and in the original lirc_ite8709 driver author's case, it sure looks like 2 is the right value. This fix should probably be applied to all stable kernels with the ite-cir driver, lest we nuke more people's trackpads. Tested-by: Matthijs van Drunen CC: Juan Jesús García de Soria <skandalfo@gmail.com> CC: stable@kernel.org Signed-off-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Andre Bartke authored
mx1_camera_add_device() can return an uninitialized value of ret. Signed-off-by:
Andre Bartke <andre.bartke@gmail.com> [g.liakhovetski@gmx.de: modified the fix to remove "ret" completely] Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Vaibhav Hiremath authored
The usecase where, user allocates small size of buffer through bootargs (video1_bufsize/video2_bufsize) and later from application tries to set the format which requires larger buffer size, driver doesn't check for insufficient buffer size and allows application to map extra buffer. This leads to kernel crash, when user application tries to access memory beyond the allocation size. Added check in both mmap and reqbuf call back function, and return error if the size of the buffer allocated by user through bootargs is less than the S_FMT size. Signed-off-by:
Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Vaibhav Hiremath authored
With addition of media-controller framework, now we have various device nodes (/dev/videoX) getting created, so hardcoding minor number in video_register_device() is not recommended. So let V4L2 framework choose free minor number for the device. Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Vladimir Pantelic authored
The omap_vout_new_crop() function has possible bug, uses uninitialized variable "crop.width/height" which is actually output of the function. Instead we should be using "try_crop.width/height" to calculate the resizer value. Signed-off-by:
Vladimir Pantelic <vladoman@gmail.com> Signed-off-by:
Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Sjoerd Simons authored
When failing to start the camera we should disable the queue again, to rollback into the same initial state. Otherwise re-trying will always hit -EBUSY Signed-off-by:
Sjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Sjoerd Simons authored
When freeing memory for the video buffers also remove them from the irq & main queues. This fixes an oops when doing the following: open ("/dev/video", ..) VIDIOC_REQBUFS VIDIOC_QBUF VIDIOC_REQBUFS close () As the second VIDIOC_REQBUFS will cause the list entries of the buffers to be cleared while they still hang around on the main and irc queues Signed-off-by:
Sjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: stable@kernel.org Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Laurent Pinchart authored
If a streaming interface has no supported format, the driver won't create a video device for the associated terminal. Fix an oops by ignoring that terminal when creating links between entities. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Laurent Pinchart authored
Entities associated with video device nodes are unregistered in video_unregister_device(). This destroys the entity even though it can still be accessed through open video device nodes. Move the media_device_unregister_entity() call from video_unregister_device() to v4l2_device_release() to ensure that the entity isn't unregistered until the last reference to the video device is released. Also remove the media_entity_get()/put() calls from v4l2-dev.c. Those functions were designed for subdevs, to avoid a parent module from being removed while still accessible through board code. They're not currently needed for video device nodes, and will oops when a hotpluggable device is disconnected during streaming, as media_entity_put() called in v4l2_device_release() tries to access entity->parent->dev->driver which is set to NULL when the device is disconnected. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Sakari Ailus <sakari.ailus@iki.fi> Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Ohad Ben-Cohen authored
Fix a potential NULL pointer dereference by skipping registration of external entities in case none are provided. This is useful at least when testing mere memory-to-memory scenarios. Signed-off-by:
Ohad Ben-Cohen <ohad@wizery.com> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Marek Szyprowski authored
__vb2_queue_alloc function returns the number of successfully allocated buffers. There is no point in checking if the returned value is negative. If this function returns 0, videobuf2 should just return -ENOMEM to userspace, because no driver can work without memory buffers. Reported-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> CC: Pawel Osciak <pawel@osciak.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Marek Szyprowski authored
queued_count variable was left untouched during the queue reinitialization in __vb2_queue_cancel, what might lead to mismatch between the real number of queued buffers and queued_count variable. Reported-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> CC: Pawel Osciak <pawel@osciak.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Marek Szyprowski authored
This reverts commit 31901a07. Queue should be reinitialized on each REQBUFS() call even if the memory access method and buffer count have not been changed. The user might have changed the format and if we go the short path introduced in that commit, the memory buffer will not be reallocated to fit with new format. The previous patch was just over-engineered optimization, which just introduced a bug to videobuf2. Reported-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> CC: Pawel Osciak <pawel@osciak.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Marek Szyprowski authored
Add __GFP_NOWARN parameter to videobuf2 dma-sg allocator to prevent kernel warning and stack dump if there is not enough memory available. Videobuf2 and drivers should correctly handle no memory case, so there is no need for stack dump and extensive log. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
- 21 Jun, 2011 1 commit
-
-
Hans de Goede authored
Unplugging a pwc cam while an app has the /dev/video# node open leads to an oops in pwc_video_close when the app closes the node, because the disconnect handler has free-ed the pdev struct pwc_video_close tries to use. Instead of adding some sort of bandaid for this. fix it properly using the v4l2 core's new(ish) behavior of keeping the v4l2_dev structure around until both unregister has been called, and all file handles referring to it have been closed: Embed the v4l2_dev structure in the pdev structure and define a v4l2 dev release callback releasing the pdev structure (and thus also the embedded v4l2 dev structure. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Cc: stable@kernel.org Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
- 11 Jun, 2011 9 commits
-
-
Marek Szyprowski authored
Add maintainers for the videobuf2 V4L2 driver framework. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Pawel Osciak <pawel@osciak.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
HeungJun, Kim authored
Signed-off-by:
HeungJun, Kim <riverful.kim@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
HeungJun, Kim authored
Remove union version in the m5mols_get_version(), and read version information directly. Also remove VERSION_SIZE. Signed-off-by:
HeungJun, Kim <riverful.kim@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Acked-by:
Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
HeungJun, Kim authored
For now, the m5mols_read() share in case of I2C packet 1, 2, 4 byte(s) width. So, this commit adds 3 functions - m5mols_read_u8/u16/u32() according to byte width of I2C packet. And, the u32 variables in spite of u8 or u16 for fitting to m5mols_read() having no choice, is replaced to have original byte width like u8, u16, u32 as same reason. Signed-off-by:
HeungJun, Kim <riverful.kim@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
HeungJun, Kim authored
The main capture and the thumbnail image size registers were erroneously defined to have 1 byte width, resulting in wrong reported image size. Fix this by changing the registers width to correct value. Reported-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
HeungJun, Kim <riverful.kim@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Sylwester Nawrocki authored
Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Sylwester Nawrocki authored
With multi-planar formats fmt.pix_mp member of struct v4l2_format should be used rather than fmt.pix. Fix find_fmt() function to do the right thing. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Sylwester Nawrocki authored
The buf_init buffer queue operation is optional and buffer_init() does nothing, remove it. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Sylwester Nawrocki authored
Avoid dereferencing of NULL f->fmt. Correct size of the allocated buffer in case the crop rectangle is smaller than the bounds rectangle (configured with S_FMT). Also remove redundant check for *num_buffer == 0 as this case is handled in videobuf2. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-