Modify UART compatible name in a common device tree for all Nuvoton
NPCM750 BMCs.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Add watchdog device node to a common device tree for all Nuvoton
NPCM750 BMCs and a board specific device tree for the NPCM750 (Poleg)
evaluation board.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-dt-4.17-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt

Pull "i.MX device tree updates for 4.17, round 2" Shawn Guo:

 - Add missing property '#sound-dai-cells' for sgtl5000 codec node
   in imx6ul-isiot board to fix warning seen with DTC 1.4.6.
 - Use stdout-path instead of linux,stdout-path to fix DTC warning
   reported by DTC 1.4.6.

* tag 'imx-dt-4.17-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx6ul-isiot: Pass the required '#sound-dai-cells'
  ARM: dts: imx6-phytec: Use the standard 'stdout-path' property

Merge tag 'uniphier-dt-v4.17-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt

Pull "UniPhier ARM SoC DT updates for v4.17 (2nd)" from Masahiro Yamada:

- add syscon property to sound nodes
- add more ethernet pin groups
- add ethernet support for PXs3 SoC

* tag 'uniphier-dt-v4.17-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  arm64: dts: uniphier: add ethernet node for PXs3
  ARM: dts: uniphier: add pinctrl groups of ethernet for second instance
  ARM: dts: uniphier: add syscon property for UniPhier sound system
  arm64: dts: uniphier: add syscon property for UniPhier sound system

Merge tag 'v4.17-rockchip-dts64-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Pull "Rockchip dts64 changes for 4.17" from Heiko Stübner:

The rk3399 gained support its Cadence displayport controller and some
minor additions like pins for 2ch i2s0 and the cif test clocks as well
as a default rate for ACLK_VIO that should be 400MHz according to the TRM.

The rk3328 got uart dmas fixed - a non-critical fix, as nobody was using
that so far.

New boards are the rk3328-based roc-rk3328-cc, the rk3368-based Lion-SOM
+ baseborad from Theobroma Systems and a standalone variant of the Sapphire
board, as a lot of people where using that without the Exkavator baseboard.

Sapphire also saw a lot of small cleanups of things that are not part
of the actual Sapphire board, but the baseboard instead. The rk3399-puma
board got i2s and tsadc support and Gru got its DP node enabled.

* tag 'v4.17-rockchip-dts64-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: remove keep-power-in-suspend from sdhci of rk3399-sapphire
  arm64: dts: rockchip: assign clock rate for ACLK_VIO on rk3399
  arm64: dts: rockchip: add a standalone version of the rk3399 sapphire
  arm64: dts: rockchip: move rk3399-sapphire pwr_btn to daughterboard
  arm64: dts: rockchip: move rk3399-sapphire i2s2 to daughterboard
  arm64: dts: rockchip: move rk3399-sapphire sdio to excavator baseboard
  arm64: dts: rockchip: enable I2S codec on rk3399-puma-haikou
  arm64: dts: rockchip: move i2s0 node from baseboard to SoM on rk3399-puma
  arm64: dts: rockchip: vdd_log on rk3399-sapphire is not an i2c slave
  arm64: dts: rockchip: add Haikou baseboard with RK3368-uQ7 SoM
  arm64: dts: rockchip: add RK3368-uQ7 (Lion) SoM
  dt-bindings: add RK3368-uQ7 SoM and EVK base board
  arm64: dts: rockchip: Fix RK3328 UART DMAs
  arm64: dts: rockchip: enable DP for rk3399-gru
  arm64: dts: rockchip: add cdn-dp node for rk3399.
  arm64: dts: rockchip: add i2s0-2ch-bus pins on rk3399
  arm64: dts: rockchip: enable tsadc on rk3399-puma
  arm64: dts: rockchip: add roc-rk3328-cc board
  arm64: dts: rockchip: Add cif test clocks for rk3399

Merge tag 'v4.17-rockchip-dts32-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Pull "Rockchip dts32 changes for 4.17" from Heiko Stübner:

For general soc-specific changes the rk322x socs got their correct grf
compatible set. Other than that there are some board-specific changes
like the Rock2 getting its otg port, recovery and power keys enabled.

The vyasa board gained an enabled emmc node and the phyCORE boards
got UHS speeds in their sd card and a fixed sd-card power supply.

Finally the veyron boards dropped a nonstandard and unused property.

* tag 'v4.17-rockchip-dts32-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: enable USB-OTG port on Radxa Rock2 Square
  ARM: dts: rockchip: add recovery button for Rock2 Square
  ARM: dts: rockchip: add power key for Rock2 Square
  ARM: dts: rockchip: Add eMMC node for rk3288-vyasa
  ARM: dts: rockchip: Support UHS mode for SD card on phyCORE-RK3288 RDK
  ARM: dts: rockchip: Fix supply node for card's power on phycore som
  ARM: dts: rockchip: add "rockchip,rk3228-grf" compatible for rk322x grf node
  ARM: dts: rockchip: drop veyron's nonstandard 'backlight-boot-off'

Add nodes of the AVE ethernet controller for PXs3 and the boards.
This SoC has two controllers.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Add pinctrl groups of ethernet, such as "ether1_rgmii" and "ether1_rmii".
These are used for second ethernet instance.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Pull "mvebu SPDX dt for 4.17: from Gregory CLEMENT:

convert to the SPDX-License-Identifier for the Kirkwood and the Armada
based device tree files.

Compared to the series submitted most of the patch have been squashed:
the result is grouped by SoC, boards, type of licenses and the patches
that were explicitly acked on the mailing list.

* tag 'mvebu-dt-4.17-spdx' of git://git.infradead.org/linux-mvebu:
  arm: dts: kirkwood*.dts: use SPDX-License-Identifier for board using GPL-2.0+
  arm: dts: kirkwood*.dts: use SPDX-License-Identifier for boards using GPL-2.0+/MIT
  arm: dts: kirkwood*.dts: use SPDX-License-Identifier for boards using GPL-2.0
  arm: dts: armada-385-turris-omnia: use SPDX-License-Identifier
  arm: dts: armada-385-db-ap: use SPDX-License-Identifier
  arm: dts: armada-388-rd: use SPDX-License-Identifier
  arm: dts: armada-xp-db-xc3-24g4xg: use SPDX-License-Identifier
  arm: dts: armada-xp-db-dxbc2: use SPDX-License-Identifier
  arm: dts: armada-370-db: use SPDX-License-Identifier
  arm: dts: armada-*.dts: use SPDX-License-Identifier for most of the Armada based board
  arm: dts: armada-xp-98dx: use SPDX-License-Identifier for prestara 98d SoCs
  arm: dts: armada-*.dtsi: use SPDX-License-Identifier for most of the Armada SoCs

Pull "mvebu dt for 4.17 (part 2)" from Gregory CLEMENT:

 - add SFP module support on the clearfog (Armada 388 based board)

 - disable internal RTC node for Linksys boards (Armada 38x based
   boards)

* tag 'mvebu-dt-4.17-2' of git://git.infradead.org/linux-mvebu:
  ARM: dts: armada388-clearfog: add SFP module support
  ARM: dts: armada-385-linksys: Disable internal RTC

Follow the recent trend for the license description
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Follow the recent trend for the license description, and also fix the
wrongly stated X11 to MIT.

As already pointed on the DT ML, the X11 license text [1] is explicitly
for the X Consortium and has a couple of extra clauses. The MIT
license text [2] is actually what the current DT files claim.

[1] https://spdx.org/licenses/X11.html
[2] https://spdx.org/licenses/MIT.htmlAcked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Follow the recent trend for the license description
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Follow the recent trend for the license description, and also fix the
wrongly stated X11 to MIT.

As already pointed on the DT ML, the X11 license text [1] is explicitly
for the X Consortium and has a couple of extra clauses. The MIT
license text [2] is actually what the current DT files claim.

[1] https://spdx.org/licenses/X11.html
[2] https://spdx.org/licenses/MIT.html

Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Acked-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Follow the recent trend for the license description, and also fix the
wrongly stated X11 to MIT.

As already pointed on the DT ML, the X11 license text [1] is explicitly
for the X Consortium and has a couple of extra clauses. The MIT
license text [2] is actually what the current DT files claim.

[1] https://spdx.org/licenses/X11.html
[2] https://spdx.org/licenses/MIT.html

Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Follow the recent trend for the license description, and also fix the
wrongly stated X11 to MIT.

As already pointed on the DT ML, the X11 license text [1] is explicitly
for the X Consortium and has a couple of extra clauses. The MIT
license text [2] is actually what the current DT files claim.

[1] https://spdx.org/licenses/X11.html
[2] https://spdx.org/licenses/MIT.html

Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Follow the recent trend for the license description, and also fix the
wrongly stated X11 to MIT.

As already pointed on the DT ML, the X11 license text [1] is explicitly
for the X Consortium and has a couple of extra clauses. The MIT
license text [2] is actually what the current DT files claim.

[1] https://spdx.org/licenses/X11.html
[2] https://spdx.org/licenses/MIT.html

Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Follow the recent trend for the license description, and also fix the
wrongly stated X11 to MIT.

As already pointed on the DT ML, the X11 license text [1] is explicitly
for the X Consortium and has a couple of extra clauses. The MIT
license text [2] is actually what the current DT files claim.

[1] https://spdx.org/licenses/X11.html
[2] https://spdx.org/licenses/MIT.html

Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Follow the recent trend for the license description, and also fix the
wrongly stated X11 to MIT.

As already pointed on the DT ML, the X11 license text [1] is explicitly
for the X Consortium and has a couple of extra clauses. The MIT
license text [2] is actually what the current DT files claim.

[1] https://spdx.org/licenses/X11.html
[2] https://spdx.org/licenses/MIT.html

Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Follow the recent trend for the license description, and also fix the
wrongly stated X11 to MIT.

As already pointed on the DT ML, the X11 license text [1] is explicitly
for the X Consortium and has a couple of extra clauses. The MIT
license text [2] is actually what the current DT files claim.

[1] https://spdx.org/licenses/X11.html
[2] https://spdx.org/licenses/MIT.htmlAcked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Follow the recent trend for the license description, and also fix the
wrongly stated X11 to MIT.

As already pointed on the DT ML, the X11 license text [1] is explicitly
for the X Consortium and has a couple of extra clauses. The MIT
license text [2] is actually what the current DT files claim.

[1] https://spdx.org/licenses/X11.html
[2] https://spdx.org/licenses/MIT.html

Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Follow the recent trend for the license description, and also fix the
wrongly stated X11 to MIT.

As already pointed on the DT ML, the X11 license text [1] is explicitly
for the X Consortium and has a couple of extra clauses. The MIT
license text [2] is actually what the current DT files claim.

[1] https://spdx.org/licenses/X11.html
[2] https://spdx.org/licenses/MIT.htmlAcked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Add SFP module support for Clearfog using the SFP phylink support.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

The internal RTC does not work correctly on these Linksys boards based
on Marvell SoCs. For me it only shows Wed Dec 31 23:59:59 1969 and for
others it is off by 3 minutes in 10 minutes running, this was reported
by multiple users. On the Linksys Mamba device the device tree comment
says that no crystal is connected to the internal RTC, this is probably
also true for the other devices.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Merge tag 'imx-dt64-4.17-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt

Pull "Freescale arm64 device tree fixups for 4.17" from Shawn Guo:
 - It reverts a couple of patches that "fix" DTC warnings on IFC memory
   controller in a wrong way.  We will start over agagin to address the
   DTC warnings later.

* tag 'imx-dt64-4.17-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  Revert "dt-bindings: ifc: Fix the unit address format in the examples"
  Revert "arm64: dts: fsl: fix ifc simple-bus unit address format warnings"

Merge tag 'socfpga_dts_for_v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt

Pull "SoCFPGA DTS updates for v4.17" from Dinh Nguyen:

- Fix GIC PPI warning
- Stratix10 platform updates
  - Disable over-current for Arria10 devkit
  - Enable watchdog timer

* tag 'socfpga_dts_for_v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  arm: dts: socfpga: fix GIC PPI warning
  arm64: dts: stratix10: disable false USB overcurrent on devkit
  arm64: dts: stratix10: enable watchdog timer on the S10 devkit

Merge tag 'omap-for-v4.17/dt-pt2-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Pull "Second set of dts changes for omap variants for v4.17" from Tony Lindgren:

This series of patches configures few new drivers and adds
omap5 specific nodes:

- Enable USB OTG mode for xhci on am437x

- A series of changes to configure aux control module instance
  on omap5 mostly to get the audio clocks configured

- A series of changes to update droid4 for MDM6600 modem USB PHY
  and UART1 pinctrl

* tag 'omap-for-v4.17/dt-pt2-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: omap4-droid4: Configure uart1 pins
  ARM: dts: omap4-droid4: Configure MDM6600 USB PHY
  ARM: dts: omap4-droid4: Fix USB PHY port naming
  ARM: dts: omap5-board-common: Add phandle for mclk clock for twl6040
  ARM: dts: omap5: add fref_xtal_ck support
  ARM: dts: omap5: add support for control module wkup pad config
  dt-bindings: omap5: ctrl: Support for control module wkup pad config
  ARM: dts: am43xx: Enable dual-role mode for USB1

Merge tag 'sunxi-h3-h5-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt

Pull "Allwinner H3/H5 changes for 4.17" from Maxime Ripard:

Here is our usual bunch of changes to the common DTSI shared between arm
and arm64, and their associated device trees.

Even though the diffstat is quite big, it's been mostly just cleanups. The
big feature is that the HDMI is now suported on H3 and H5 boards.

* tag 'sunxi-h3-h5-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  arm64: allwinner: H5: Add Xunlong Orange Pi Zero Plus
  ARM: dts: sun8i-h3: Add Mali node
  ARM64: dts: sun50i: h5: Enable HDMI output on H5 boards
  ARM: dts: sun8i: h3: Enable HDMI output on H3 boards
  ARM: dts: sunxi: h3/h5: Add HDMI pipeline
  ARM: dts: sun8i: h2-plus: remove unnecessary mmc1_pins node
  ARM: dts: sunxi: h3-h5: rename mmc0_pins_a and mmc1_pins_a
  ARM: dts: sunxi: h3-h5: Move pinctrl of mmc1 from dts to dtsi
  ARM: dts: sunxi: h3-h5: Move pinctrl of mmc0 from dts to dtsi
  ARM: dts: sunxi: h3-h5: remove mmc0 card detection pin from pinctrl
  ARM: dts: sun8i: h2+: add support for Banana Pi M2 Zero board
  ARM: dts: sunxi: Switch MMC nodes away from cd-inverted property
  ARM: dts: nanopi-neo-air: Add WiFi / eMMC

Merge tag 'sunxi-dt64-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt

Pull "Allwinner arm64 DT changes for 4.17" from Maxime Ripard:

We've had for this release a pretty good progress on the arm64 front as
well:
  - The A64 now has SPDIF support
  - The H6 is now supported (even though at an early stage)
  - The TERES-I laptop from Olimex has seen some early support as well

* tag 'sunxi-dt64-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  arm64: dts: allwinner: a64: Add support for TERES-I laptop
  arm64: dts: allwinner: a64: add simplefb for A64 SoC
  arm64: dts: allwinner: a64: Add watchdog
  arm64: dts: allwinner: a64: Add i2c0 pins
  arm64: allwinner: h6: add support for Pine H64 board
  arm64: allwinner: h6: add the basical Allwinner H6 DTSI file
  arm64: dts: sunxi: Switch MMC nodes away from cd-inverted property
  arm64: dts: allwinner: a64: Add DAI nodes
  arm64: dts: allwinner: a64: Add SPDIF to the Pine64
  arm64: dts: allwinner: a64: Add SPDIF to the A64
  arm64: dts: allwinner: a64: Add the SPDIF block and pin

Merge tag 'sunxi-dt-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt

Pull "Allwinner DT changes for 4.17" from Maxime Ripard:

There is a bunch of significant additions for this release cycle:
  - The A83t now has HDMI support
  - The A80 finally has SMP support (without PSCI, unfortunately)
  - The A80 has preliminary display support

And also:
  - a number of boards based on old (A10, A20) SoCs now have the HDMI
    support enabled.
  - The display frontend is enabled on the A33, allowing to use it for
    hardware display scaling
  - New boards: Olimex A20-SOM204 variants

* tag 'sunxi-dt-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (39 commits)
  ARM: dts: sun9i: cubieboard4: Enable VGA display output
  ARM: dts: sun9i: Add pinmux settings for LCD0 RGB888 output.
  ARM: dts: sun9i: Add device nodes for documented display pipelines for A80
  ARM: dts: sun8i: reference tablet design: Enable PMIC power supplies
  ARM: dts: sun8i: a33: Enable A33 internal audio codec on A33-OLinuXino
  ARM: dts: sun8i: a33: Enable PMIC power supplies on A33-OLinuXino
  ARM: dts: sun8i: a33: Drop sunxi-common-regulators.dtsi for A33-OLinuXino
  ARM: dts: sun8i: a33: Drop GPIO pinmux settings for A33-OLinuXino
  ARM: dts: sun9i: Add enable-method for SMP support for the A80 SoC
  ARM: dts: sun8i: h3: Add eMMC for NanoPi M1 Plus
  ARM: dts: sun8i: a711: set regulator for each cluster of CPUs
  ARM: dts: sun8i: a83t: add stable OPP tables and CPUfreq
  ARM: dts: sun8i: a83t: add cpu0 and cpu100 labels
  ARM: dtsi: axp81x: remove IP name from DT node name
  ARM: dtsi: sun8i: a711: enable battery power supply subnode
  ARM: dtsi: axp81x: add battery power supply subnode
  ARM: dtsi: axp81x: add node for ADC
  ARM: dtsi: axp22x: add node for ADC
  ARM: dtsi: axp209: add node for ADC
  ARM: dts: sun7i: Enable HDMI support on the Orange Pi mini
  ...

Merge tag 'at91-ab-4.17-dt2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt

Pull "AT91 DT for 4.17 #2" from Alexandre Belloni:

Pinctrl fixes, the UART pullups were discussed back in 2016.

* tag 'at91-ab-4.17-dt2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  ARM: dts: at91sam9260: pullup rx on usart0
  ARM: dts: at91rm9200: pullup rx on uart0
  ARM: dts: at91: fixes uart pinctrl, set pullup on rx, clear pullup on tx
  ARM: dts: at91: at91sam9g25: fix mux-mask pinctrl property

Merge tag 'amlogic-dt-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt

Pull "Amlogic 32-bit DT updates for v4.17" from Kevin Hilman:

- odroid-c1: add microSD, ethernet, USB reset
- add reset controller
- fix requesting GPIOs greater than GPIOZ_3

* tag 'amlogic-dt-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM: dts: meson8b: the CBUS GPIO controller only has 83 GPIOs
  ARM: dts: meson8b-odroidc1: add microSD support
  ARM: dts: meson8b: add the I2C clocks
  ARM: dts: meson8b-odroidc1: ethernet support
  ARM: dts: meson8b: extend ethernet controller description
  ARM: dts: meson8: add the USB reset line
  ARM: dts: meson8: add the reset controller
  ARM: dts: meson8b: grow the reset controller memory zone

Merge tag 'qcom-dts-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt

Pull "Qualcomm Device Tree Changes for v4.17" from Andy Gross:

* Add initial DTS file for Samsung Galaxy S5
* Fixups for castor touchscreen node
* Fixup QS600 at23 manufacturer
* Add XOADC and IIO to APQ8064

* tag 'qcom-dts-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  ARM: dts: msm8974: castor: Fix typo and add startup delay in touchscreen node
  ARM: dts: add XOADC and IIO HWMON to APQ8064
  ARM: dts: use 'atmel' as at24 manufacturer for qcom-apq8064-cm-qs600
  ARM: dts: qcom: Add initial DTS file for Samsung Galaxy S5 phone

Merge tag 'qcom-arm64-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt

Pull "Qualcomm ARM64 Updates for v4.17" from Andy Gross:

* Fix GIC_CPU_MASK_SIMPLE and SPI5 config on MSM8996
* Add SDM845 and kryo385 documentation
* Add MSM8916 cooling maps, cpu frequency scaling, APCS, and A53 PLL
* Switch APCS to use mailbox on MSM8916
* Add rmtfs-mem on MSM8996

* tag 'qcom-arm64-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  arm64: dts: qcom: Fix SPI5 config on MSM8996
  dt-bindings: qcom: Add SDM845 bindings
  dt-bindings: arm: Document kryo385 cpu
  arm64: dts: msm8916: Add cpu cooling maps
  arm64: dts: msm8996: Add rmtfs sharedmem node
  arm64: dts: qcom: msm8916: Add CPU frequency scaling support
  arm64: dts: qcom: msm8916: Add clock properties to the APCS node
  arm64: dts: qcom: msm8916: Probe the APCS mailbox driver
  arm64: dts: qcom: msm8916: Add msm8916 A53 PLL DT node
  arm64: dts: msm8996: Fix wrong use of GIC_CPU_MASK_SIMPLE()

The "cooling-min-level" and "cooling-max-level" properties are not
parsed by any part of the kernel currently and the max cooling state of
gpio-fan cooling device is found by referring to the
"gpio-fan,speed-map" instead.

Remove the unused properties from the gpio-fan node.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The "cooling-min-level" and "cooling-max-level" properties are not
parsed by any part of the kernel currently and the max cooling state of
gpio-fan cooling device is found by referring to the
"gpio-fan,speed-map" instead.

Remove the unused properties from the gpio-fan node.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The "cooling-min-level" and "cooling-max-level" properties are not
parsed by any part of the kernel currently and the max cooling state of
a CPU cooling device is found by referring to the cpufreq table instead.

Remove the unused properties from the CPU nodes.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'armsoc-versatile-drm-dts' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/dt

Pull "DTS changes for RealView+Versatile" from Linus Walleij:

This augments the RealView and Versatile device trees to properly
define the VGA and panel connectors in preparation for DRM.

* tag 'armsoc-versatile-drm-dts' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
  ARM: dts: Augment panel setting for Versatile
  ARM: dts: Add Versatile IB2 device tree
  ARM: dts: Augment VGA connector bridge on Realview PBX
  ARM: dts: Augment VGA connector bridge on Realview EB
  ARM: dts: Augment VGA connector bridge on PB1176
  ARM: dts: Augment VGA connector bridge on PB11MPcore

Merge tag 'amlogic-dt64' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt

Pull "Amlogic 64-bit DT updates for v4.17" from Kevin Hilman:

- AXG: add/enable UART_A, I2C, RMII, system controller, HW RNG
- accept MAC from u-boot environment
- misc. fixes

* tag 'amlogic-dt64' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM64: dts: meson-gx: make efuse read-only
  ARM64: dts: meson: bump mali450 clk to 744MHz
  meson-gx-socinfo: Add package id for S905H
  ARM64: dts: meson-gxbb-wetek: add a wetek specific dtsi to cleanup hub and play2
  ARM64: dts: meson: reduce odroid-c2 eMMC maximum rate
  ARM64: dts: amlogic: Convert to new-style SPDX license identifiers
  ARM64: dts: meson-axg: fix pwm_AO_cd compatible
  ARM64: dts: meson-axg: add sec_AO system controller
  ARM64: dts: meson: accept MAC addr from u-boot environment
  ARM64: dts: meson s905x: accept MAC addr from u-boot environment
  ARM64: dts: meson-axg: enable the UART_A controller
  ARM64: dts: meson-axg: complete the pinctrl info for UART_AO_A
  ARM64: dts: meson-axg: uart: Add the pinctrl info description
  ARM64: dts: meson-axg: uart: drop legacy compatible name from EE UART
  ARM64: dts: meson-axg: add RMII pins for ethernet controller
  ARM64: dts: meson-axg: enable I2C Master-1 for the audio speaker
  ARM64: dts: meson-axg: describe pin DT info for I2C controller
  ARM64: dts: meson-axg: add I2C DT info for Meson-AXG SoC
  ARM64: meson-axg: enable hardware rng

Pull "mvebu dt64 for 4.17 (part 2)" from Gregory CLEMENT:

- Add registers clock for all the peripheral nodes that had been yet
  converted for CP110 (Armada 7K/8K)

- Document URL for schematic for the EspressoBin (Armada 3720)

* tag 'mvebu-dt64-4.17-2' of git://git.infradead.org/linux-mvebu:
  arm64: dts: armada-3720-espressobin: Document URL for schematic
  ARM64: dts: marvell: armada-cp110: Add registers clock for the PCIe nodes
  ARM64: dts: marvell: armada-cp110: Add registers clock for the NAND node
  ARM64: dts: marvell: armada-cp110: Add registers clock for the crypto node
  ARM64: dts: marvell: armada-cp110: Add registers clock for the trng node
  ARM64: dts: marvell: armada-cp110: Add registers clock for XOR engine nodes
  ARM64: dts: marvell: armada-cp110: Add registers clock for USB host nodes