into ppc970.osdl.org:/home/torvalds/v2.6/linux

- bootp.lds is a source file not a target
- vmlinux.lds doesn't need to depend on the top level Makefile

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The old ones were not only hard to use, they were in fact
impossible or a low-level sound driver to get right, since
the core sound code didn't even export all the necessary
information.

Add the file offset to the /proc read interfaces, and make
them simpler to use. The core now does a offset updates, and
sanity-checks the values so that the low-level drivers don't
need to worry.

The SLB rewrite removed a fix for a hard to hit bug, but the SFS guys
managed to hit it straight away. We need to check both r1 and PACAKSAVE
or else we could cast our kernel segment out when on the irq or softirq
stack.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This part got missed in the earlier merge, not sure where it escaped.

into ppc970.osdl.org:/home/torvalds/v2.6/linux

  Disable pre-emption around access to pgtable_cache_size, pgd_quicklist,
  and pmd_quicklist.
Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com>
Signed-off-by: Zou Nanhai <nanhai.zou@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Include compiler.h from sg.h as it uses the __user notation, and change
the types in scsi.h to use user exportable types.
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Exports blk_queue_resize_tags since it is an exported interface.
Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The block layer SG should have the identical behaviour as SCSI sg when
it comes to SG_SET_RESERVED_SIZE - allow caller to specify a large
amount, truncate to largest we support, and return that with
SG_GET_RESERVED_SIZE.  Currently we fail with -EINVAL if the value is
too large, I think the SCSI sg behaviour is more sane to use.  This
one-liner fixes it up, please apply for 2.6.8.
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

drivers/char/watchdog/wdt977.c:291:9: warning: incorrect type in initializer (different address spaces)
drivers/char/watchdog/wdt977.c:291:9:    expected char const [noderef] *register __p<asn:1>
drivers/char/watchdog/wdt977.c:291:9:    got char const *buf
...

drivers/char/nwbutton.c:177:24: warning: incorrect type in argument 1 (different address spaces)/home/rmk/bk/linux-2.6-rmk/drivers/char/nwbutton.c:177:24:    expected void [noderef] *to<asn:1>
drivers/char/nwbutton.c:177:24:    got char *buffer
drivers/char/nwbutton.c:177:24: warning: incorrect type in initializer (different address spaces)
drivers/char/nwbutton.c:177:24:    expected void [noderef] *to<asn:1>
drivers/char/nwbutton.c:177:24:    got char *buffer
drivers/char/nwbutton.c:189:11: warning: incorrect type in initializer (incompatible argument 2 (different address spaces))
drivers/char/nwbutton.c:189:11:    expected int [usertype] ( *read )( ... )
drivers/char/nwbutton.c:189:11:    got int ( static [addressable] [toplevel] *<noident> )( ... )

drivers/char/ds1620.c:230:19: warning: incorrect type in argument 1 (different address spaces)
drivers/char/ds1620.c:230:19:    expected void [noderef] *to<asn:1>
drivers/char/ds1620.c:230:19:    got char *buf
drivers/char/ds1620.c:230:19: warning: incorrect type in initializer (different address spaces)
drivers/char/ds1620.c:230:19:    expected void [noderef] *to<asn:1>
drivers/char/ds1620.c:230:19:    got char *buf
...
drivers/char/ds1620.c:383:52: warning: Using plain integer as NULL pointer

arch/arm/kernel/io.c:15:5: warning: generating address of non-lvalue
arch/arm/kernel/io.c:15:5: warning: loading unknown expression
arch/arm/kernel/io.c:29:5: warning: generating address of non-lvalue
arch/arm/kernel/io.c:29:5: warning: loading unknown expression

This fixes sparse warnings in fpa11_cpdt (coprocessor data transfer)
instruction emulation.  Note that pointers need to be cast to unsigned
long not unsigned int, so convert user registers to be unsigned long
type.

This cleans up and simplifies drivers, and also allows us future
simplification in the VFS layer, since it removes knowledge about
internal VFS layer handling of "f_pos".

Nobody ever fixed the big FIXME in sysctl - but we really need
to pass around the proper "loff_t *" to all the sysctl functions
if we want them to be well-behaved wrt the file pointer position.

This is all preparation for making direct f_pos accesses go
away.

 - conversion to seq_file, overflow fixes
 - qos_parse sanitized (3 sscanf calls instead of insane manual parsing)
	leaks plugged
	code cleaned up

We still have serious races, but they are general problem in atm code - it
has no locking whatsoever for any of the lists (mpcs, qos_head, per-client
lists).

Adds support for 'hh' (store number in char *) and 'll' (proper C99 for
long long) modifiers to sscanf().

no need for the mtrr code to check any more.

remove the run-time tests for it.

You can seek the tape, but you do it with the magic tape
control ioctl's, not with lseek/pread/pwrite.

unnecessary tests at read/write time.

Remove the test from the socket code, now that it's no
longer necessary.

file descriptors.

This also removes the ESPIPE logic from pipes and seq_files,
since the VFS layer now supports it. 

Adds a cleaned up version of the PPC4xx DMA engine library.  Converted to
new DCR access method and DMA API.
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Remove pci-dma.c.  It is cruft left over from the DMA API changes.
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch corrects the Ebony board's uart clock value to the rate of the
external Epson SG-615P clock source.  Now good to 115Kbps.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> for CELF
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Remove some old cruft in the kernel lowmem mapping code and save some
memory in the process.
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

When normal IRQ balancing is used, the following warnings appear:

arch/ppc64/kernel/xics.c: In function `get_irq_server':
arch/ppc64/kernel/xics.c:242: warning: unused variable `cpumask'
arch/ppc64/kernel/xics.c:243: warning: unused variable `tmp'

Simply move the variables inside the #ifdef
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This somehow ended up out in the global Kconfig menu.  Move it back inside
debugging where it belongs.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Some new sysfs macros declare a store_purr() function that never gets used,
which makes a compiler warning happen.  Suppress the warning with the used
attribute.
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Due to a mismerge, some code in chrp_progress appears twice. While here,
clean up some formatting issues.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

We need to set the thread priority to medium when entering all exceptions. 
We may have been executing in low priority (eg the idle loop), but
definitely do not want to remain in that priority for the duration of the
exception (eg a device interrupt).
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>