Use the ddc pointer provided by the generic connector.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ff968add8074d109aeed02f0708edd85138246c3.1564161140.git.andrzej.p@collabora.com

Use the ddc pointer provided by the generic connector.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d9e8d4281f6778e5598410a44f1b29c85df1c16d.1564161140.git.andrzej.p@collabora.com

Use the ddc pointer provided by the generic connector.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/510765aff8ef99683aa2da48bd08004376b1980a.1564161140.git.andrzej.p@collabora.com

Use the ddc pointer provided by the generic connector.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1c660776741760b8094484268b670a09da8a9042.1564161140.git.andrzej.p@collabora.com

Use the ddc pointer provided by the generic connector.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bcfe39a0333df951a7d160b3a946c2c32e7eac7f.1564161140.git.andrzej.p@collabora.com

Use the ddc pointer provided by the generic connector.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b5a8881b226a9af7d31eb6a57d7fe0fccdcb3a47.1564161140.git.andrzej.p@collabora.com

Allow passing ddc adapter pointer to the init function. Even if
drm_connector_init() sometime in the future decides to e.g. memset() all
connector fields to zeros, the newly added function ensures that at its
completion the ddc member of connector is correctly set.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3915224ae895240fd0973cf7f06b9d453e4d8520.1564161140.git.andrzej.p@collabora.com

Add generic code which creates symbolic links in sysfs, pointing to ddc
interface used by a particular video output. For example:

ls -l /sys/class/drm/card0-HDMI-A-1/ddc
lrwxrwxrwx 1 root root 0 Jun 24 10:42 /sys/class/drm/card0-HDMI-A-1/ddc \
	-> ../../../../soc/13880000.i2c/i2c-2

This makes it easy for user to associate a display with its ddc adapter
and use e.g. ddcutil to control the chosen monitor.

This patch adds an i2c_adapter pointer to struct drm_connector. Particular
drivers can then use it instead of using their own private instance. If a
connector contains a ddc, then create a symbolic link in sysfs.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d470def6cd661b777faeee67b5838a4623c4010e.1564161140.git.andrzej.p@collabora.com

Move the driver to the new haven for tiny DRM drivers.

Cc: Hans de Goede <hdegoede@redhat.com>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725105132.22545-4-noralf@tronnes.org

The drm in tinydrm is superfluous so rename to tiny.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725105132.22545-3-noralf@tronnes.org

This makes the tiny drivers visible by default without having to enable a
knob.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com> to it once
Link: https://patchwork.freedesktop.org/patch/msgid/20190725105132.22545-2-noralf@tronnes.org

Everyone is just using gem_object->resv now.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725132655.11951-5-daniel.vetter@ffwll.ch

That way we can ditch our gem_prime_res_obj implementation. Since ttm
absolutely needs the right reservation object all the boilerplate is
already there and we just have to wire it up correctly.

Note that gem/prime doesn't care when we do this, as long as we do it
before the bo is registered and someone can call the handle2fd ioctl
on it.

Aside: ttm_buffer_object.ttm_resv could probably be ditched in favour
of always passing a non-NULL resv to ttm_bo_init(). At least for gem
drivers that would avoid having two of these, on in ttm_buffer_object
and the other in drm_gem_object, one just there for confusion.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Michel Dänzer" <michel.daenzer@amd.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Evan Quan <evan.quan@amd.com>
Cc: Sonny Jiang <sonny.jiang@amd.com>
Cc: Amber Lin <Amber.Lin@amd.com>
Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Cc: Junwei Zhang <Jerry.Zhang@amd.com>
Cc: Thomas Zimmermann <contact@tzimmermann.org>
Cc: Samuel Li <Samuel.Li@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725132655.11951-4-daniel.vetter@ffwll.ch

That way we can ditch our gem_prime_res_obj implementation. Since ttm
absolutely needs the right reservation object all the boilerplate is
already there and we just have to wire it up correctly.

Note that gem/prime doesn't care when we do this, as long as we do it
before the bo is registered and someone can call the handle2fd ioctl
on it.

Aside: ttm_buffer_object.ttm_resv could probably be ditched in favour
of always passing a non-NULL resv to ttm_bo_init(). At least for gem
drivers that would avoid having two of these, on in ttm_buffer_object
and the other in drm_gem_object, one just there for confusion.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725132655.11951-3-daniel.vetter@ffwll.ch

That way we can ditch our gem_prime_res_obj implementation. Since ttm
absolutely needs the right reservation object all the boilerplate is
already there and we just have to wire it up correctly.

Note that gem/prime doesn't care when we do this, as long as we do it
before the bo is registered and someone can call the handle2fd ioctl
on it.

Aside: ttm_buffer_object.ttm_resv could probably be ditched in favour
of always passing a non-NULL resv to ttm_bo_init(). At least for gem
drivers that would avoid having two of these, on in ttm_buffer_object
and the other in drm_gem_object, one just there for confusion.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725132655.11951-2-daniel.vetter@ffwll.ch

Fix sparse warning:

drivers/gpu/drm/bridge/analogix/analogix_dp_core.c:1151:5: warning:
 symbol 'analogix_dp_atomic_check' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190730150057.57388-1-yuehaibing@huawei.com

We need to check the context number instead if the previous sequence to detect
an error and if an error is detected we need to drop the reference to the
current fence or otherwise would leak it.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 27b575a9 ("drm/syncobj: add timeline payload query ioctl v6")
Link: https://patchwork.freedesktop.org/patch/319123/

Mark switch cases where we are expecting to fall through.

This patch fixes the following warning (Building: arm):

drivers/gpu/drm/sti/sti_hdmi.c: In function ‘hdmi_audio_configure’:
drivers/gpu/drm/sti/sti_hdmi.c:851:13: warning: this statement may fall through [-Wimplicit-fallthrough=]
   audio_cfg |= HDMI_AUD_CFG_CH78_VALID;
drivers/gpu/drm/sti/sti_hdmi.c:852:2: note: here
  case 6:
  ^~~~
drivers/gpu/drm/sti/sti_hdmi.c:853:13: warning: this statement may fall through [-Wimplicit-fallthrough=]
   audio_cfg |= HDMI_AUD_CFG_CH56_VALID;
drivers/gpu/drm/sti/sti_hdmi.c:854:2: note: here
  case 4:
  ^~~~
drivers/gpu/drm/sti/sti_hdmi.c:855:13: warning: this statement may fall through [-Wimplicit-fallthrough=]
   audio_cfg |= HDMI_AUD_CFG_CH34_VALID | HDMI_AUD_CFG_8CH;
drivers/gpu/drm/sti/sti_hdmi.c:856:2: note: here
  case 2:
  ^~~~
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190729222752.GA20277@embeddedor

Fixes the following warnings:

../drivers/gpu/drm/drm_dp_mst_topology.c:1593: warning: Excess function parameter 'drm_connector' description in 'drm_dp_mst_connector_late_register'
../drivers/gpu/drm/drm_dp_mst_topology.c:1613: warning: Excess function parameter 'drm_connector' description in 'drm_dp_mst_connector_early_unregister'
../drivers/gpu/drm/drm_dp_mst_topology.c:1594: warning: Function parameter or member 'connector' not described in 'drm_dp_mst_connector_late_register'
../drivers/gpu/drm/drm_dp_mst_topology.c:1614: warning: Function parameter or member 'connector' not described in 'drm_dp_mst_connector_early_unregister'

Fixes: 562836a2 ("drm/dp_mst: Enable registration of AUX devices for MST ports")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190726142057.224121-1-sean@poorly.run

Now that we use the drm psr helpers, we no longer need to hand-roll our
atomic_commit_tail implementation. So use the helper

Changes in v2:
- None
Changes in v3:
- None
Changes in v4:
- None
Changes in v5:
- None

Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190228210939.83386-6-sean@poorly.run
Link to v2: https://patchwork.freedesktop.org/patch/msgid/20190326204509.96515-5-sean@poorly.run
Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-11-sean@poorly.run
Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-12-sean@poorly.run

Cc: Zain Wang <wzz@rock-chips.com>
Cc: Tomasz Figa <tfiga@chromium.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-12-sean@poorly.run

Instead of fully disabling and re-enabling the vop on self refresh
transitions, only disable the active windows. This will speed up
self refresh exits substantially and is still a power-savings win.

This patch integrates portions of Zain's patch from here:
https://patchwork.kernel.org/patch/9615063/

Changes in v2:
- None
Changes in v3:
- None
Changes in v4:
- Adjust for preceding vop_win_disable changes
Changes in v5:
- None

Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190228210939.83386-5-sean@poorly.run
Link to v2: https://patchwork.freedesktop.org/patch/msgid/20190326204509.96515-4-sean@poorly.run
Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-10-sean@poorly.run
Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-11-sean@poorly.run

Cc: Zain Wang <wzz@rock-chips.com>
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Kristian H. Kristensen <hoegsberg@chromium.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-11-sean@poorly.run

Change the argument to vop_win_disable to vop_win to accomodate future
changes to the function.

Changes in v4:
- Added to the patchset
Changes in v5:
- None

Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-10-sean@poorly.runTested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-10-sean@poorly.run

Instead of rolling our own implementation for tracking when PSR should
be [in]active, use the new self refresh helpers to do the heavy lifting.

Changes in v2:
- updated to reflect changes made in the helpers
Changes in v3:
- use the new atomic hooks to inspect crtc state instead of needing conn state (Daniel)
Changes in v4:
- Use Laurent's get_new_connector_for_encoder helper (Daniel)
- Exit vop disable early if it's already off
Changes in v5:
- Rebase on latest drm-misc-next
- Resolve conflict with s/edp_vsc_psr/dp_sdp/ rename
- Resolve conflict with drm_atomic.h header inclusion

Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190228210939.83386-4-sean@poorly.run
Link to v2: https://patchwork.freedesktop.org/patch/msgid/20190326204509.96515-3-sean@poorly.run
Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-9-sean@poorly.run
Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-9-sean@poorly.run

Cc: Zain Wang <wzz@rock-chips.com>
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
[seanpaul resolved some conflicts with drmP.h work and Helen's async fixes]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-9-sean@poorly.run

Once we start shutting off the link during PSR, we're going to want fast
training to work. If the display doesn't support fast training, don't
enable psr.

Changes in v2:
- None
Changes in v3:
- None
Changes in v4:
- None
Changes in v5:
- None

Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190228210939.83386-3-sean@poorly.run
Link to v2: https://patchwork.freedesktop.org/patch/msgid/20190326204509.96515-2-sean@poorly.run
Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-9-sean@poorly.run
Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-8-sean@poorly.run

Cc: Zain Wang <wzz@rock-chips.com>
Cc: Tomasz Figa <tfiga@chromium.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-8-sean@poorly.run

We were already using the generic functions in our debugfs code, do the
same in jh057n_shutdown. This was suggested by Sam Ravnborg.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/a37dd5083462064f437ff62fd84e6576d8a7c8dc.1564146727.git.agx@sigxcpu.org

Most of them had these already but two mere missing. This eases
debugging.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/6b237a570cb368dc4471fb8feb3a0441813cd576.1564146727.git.agx@sigxcpu.org

This makes it symmetric with the panel init happening in enable().
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/e2c31d34ce1f917065d590297e5115a4ca954874.1564146727.git.agx@sigxcpu.org

If the panel is wrapped in a panel_bridge it gets prepar()ed before the
upstream DSI bridge which can cause hangs (e.g. with imx-nwl since clocks
are not enabled yet). To avoid this move the panel's first DSI access to
enable() so the upstream bridge can prepare the DSI host controller in
it's pre_enable().

This is also in line with other panel drivers.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/12c3495b234952aafe11980a9e06cfd246134660.1564146727.git.agx@sigxcpu.org

In the patch ("video: of: display_timing: Don't yell if no timing node
is present") we'll stop spouting an error directly in
of_get_display_timing() if no node is present.  Presumably amba-clcd
should take charge of spouting its own error now.

NOTE: we'll print two errors if the node was present but there were
problems parsing the timing node (one in of_parse_display_timing() and
this new one).  Since this is a fatal error for the driver's probe
(and presumably someone will be debugging), this should be OK.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190722182439.44844-5-dianders@chromium.org

In the patch ("video: of: display_timing: Don't yell if no timing node
is present") we'll stop spouting an error directly in
of_get_display_timing() if no node is present.  Presumably panel-lvds
should take charge of spouting its own error now.

NOTE: we'll print two errors if the node was present but there were
problems parsing the timing node (one in of_parse_display_timing() and
this new one).  Since this is a fatal error for the driver's probe
(and presumably someone will be debugging), this should be OK.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190722182439.44844-4-dianders@chromium.org

There may be cases (like in panel-simple.c) where we have a sane
fallback if no timings are specified in the device tree.  Let's get
rid of the unconditional pr_err().  We can add error messages in
individual drivers if it makes sense.

NOTE: we'll still print errors if the node is present but there are
problems parsing the timings.

Fixes: b8a2948f ("drm/panel: simple: Add ability to override typical timing")
Reported-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190722182439.44844-3-dianders@chromium.org

From code inspection it can be seen that of_get_display_timing() is
lacking an of_node_put().  Add it.

Fixes: ffa3fd21 ("videomode: implement public of_get_display_timing()")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190722182439.44844-2-dianders@chromium.org

The Sharp LD-D5116Z01B is a 12.3" eDP panel with a 1920X1280 resolution.
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190708165811.46370-1-jeffrey.l.hugo@gmail.com

The Sharp LD-D5116Z01B is a 12.3" eDP panel with a 1920X1280 resolution.
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190708165753.46275-1-jeffrey.l.hugo@gmail.com

The following function calls may fail and return NULL, so the null check
is added.
of_graph_get_next_endpoint
of_graph_get_remote_port_parent
of_graph_get_remote_port

Update: Thanks to Sam Ravnborg, for suggession on the use of goto to avoid
leaking endpoint.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190724195534.9303-1-navid.emamdoost@gmail.com

Since governor name is defined by DEVFREQ framework internally, use the
macro definition instead of using the name directly.
Signed-off-by: Yue Hu <huyue2@yulong.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Jordan Crouse <jcrouse@codeaurora.org> for the msm part.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725035239.1192-1-zbestahu@gmail.com

Midgard/Bifrost GPUs have a bunch of feature registers providing details
of what the hardware supports. Panfrost already reads these, this patch
exports them all to user space so that the jobs created by the user space
driver can be tuned for the particular hardware implementation.
Signed-off-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190724105626.53552-1-steven.price@arm.com

Implement late_register and early_unregister hooks for MST connectors.
Call drm helpers for MST connector registration, which registers the
AUX devices.

Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723232808.28128-10-sunpeng.li@amd.com

Set the connector's kernel device as the parent for the aux kernel
device. This allows udev rules to access connector attributes when
creating symlinks to aux devices.

For example, the following udev rule:

SUBSYSTEM=="drm_dp_aux_dev", SUBSYSTEMS=="drm", ATTRS{edid}=="*",
	SYMLINK+="drm_dp_aux/by-name/$id"

Will create the following symlinks using the connector's name:

$ ls /dev/drm_dp_aux/by-name/
card0-DP-1  card0-DP-2  card0-DP-3

Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723232808.28128-6-sunpeng.li@amd.com

Set the connector's kernel device as the parent for the aux kernel
device. This allows udev rules to access connector attributes when
creating symlinks to aux devices.

Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723232808.28128-4-sunpeng.li@amd.com