- 20 May, 2011 1 commit
-
-
Dave Airlie authored
* 'keithp/drm-intel-next' of ../drm-next: drm/i915: initialize gen6 rps work queue on Sandy Bridge and Ivy Bridge drm/i915/sdvo: Reorder i2c initialisation before ddc proxy drm/i915: FDI link training broken on Ironlake by Ivybridge integration drm/i915: enable rc6 by default drm/i915: add fbc enable flag, but disable by default drm/i915: clean up unused ring_get_irq/ring_put_irq functions drm/i915: fix user irq miss in BSD ring on g4x
-
- 18 May, 2011 2 commits
-
-
Jesse Barnes authored
It's not used on Ironlake, but is used on later generations, so make sure it exists before we try to use it in the interrupt handlers. Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by:
Keith Packard <keithp@keithp.com> Signed-off-by:
-
Chris Wilson authored
The ddc proxy depends upon the underlying i2c bus being selected. Under certain configurations, the i2c-adapter functionality is queried during initialisation and so may trigger an OOPS during boot. Hence, we need to reorder the initialisation of the ddc proxy until after we hook up the i2c adapter for the SDVO device. The condition under which it fails is when the i2c_add_adapter calls into i2c_detect which will attempt to probe all valid addresses on the adapter iff there is a pre-existing i2c_driver with the same class as the freshly added i2c_adapter. So it appears to depend upon having compiled in (or loaded such a module before i915.ko) an i2c-driver that likes to futz over the i2c_adapters claiming DDC support. Reported-by:
Mihai Moldovan <ionic@ionic.de> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
- 17 May, 2011 3 commits
-
-
Keith Packard authored
Commit 357555c0 split out IVB-specific register definitions for FDI link training, but a piece of that commit stopped executing some critical code on Ironlake systems while leaving it running on Sandybridge. Turn that code back on both Ironlake and Sandybridge Signed-off-by:
-
Jesse Barnes authored
With FBC disabled by default, it should be safe to enable RC6. So let's give it a try. Signed-off-by:
Ben Widawsky <ben@bwidawsk.net> Signed-off-by:
-
Jesse Barnes authored
FBC has too many corner cases that we don't currently deal with, so disable it by default so we can enable more important features like RC6, which conflicts in some configurations. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=31742Signed-off-by:
-
- 16 May, 2011 34 commits
-
-
Feng, Boqun authored
This patch depends on patch "drm/i915: fix user irq miss in BSD ring on g4x". Once the previous patch apply, ring_get_irq/ring_put_irq become unused. So simply remove them. Signed-off-by:
Feng, Boqun <boqun.feng@intel.com> Reviewed-by:
Xiang, Haihao <haihao.xiang@intel.com> Signed-off-by:
-
Feng, Boqun authored
On g4x, user interrupt in BSD ring is missed. This is because though g4x and ironlake share the same bsd_ring, their interrupt control interfaces have _two_ differences. 1.different irq enable/disable functions: On g4x are i915_enable_irq and i915_disable_irq. On ironlake are ironlake_enable_irq and ironlake_disable_irq. 2.different irq flag: On g4x user interrupt flag in BSD ring on is I915_BSD_USER_INTERRUPT. On ironlake is GT_BSD_USER_INTERRUPT Old bsd_ring_get/put_irq call ring_get_irq and ring_get_irq. ring_get_irq and ring_put_irq only call ironlake_enable/disable_irq. So comes the irq miss on g4x. To fix this, as other rings' code do, conditionally call different functions(i915_enable/disable_irq and ironlake_enable/disable_irq) and use different interrupt flags in bsd_ring_get/put_irq. Signed-off-by:
-
Randy Dunlap authored
Fix build errors when CONFIG_ACPI is enabled but MXM_WMI is not enabled by selecting both MXM_WMI and ACPI_WMI (the latter just for kconfig dependencies): nouveau_acpi.c:(.text+0x2400c8): undefined reference to `mxm_wmi_call_mxmx' nouveau_acpi.c:(.text+0x2400cf): undefined reference to `mxm_wmi_call_mxds' nouveau_acpi.c:(.text+0x2400fe): undefined reference to `mxm_wmi_call_mxmx' nouveau_acpi.c:(.text+0x2402ba): undefined reference to `mxm_wmi_supported Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
* 'nouveau/drm-nouveau-next' of /ssd/git/drm-nouveau-next: (55 commits) drm/nouveau: make cursor_set implementation consistent with other drivers drm/nva3/clk: better pll calculation when no fractional fb div available drm/nouveau/pm: translate ramcfg strap through ram restrict table drm/nva3/pm: allow use of divisor 16 drm/nvc0/pm: parse clock for pll 0x0a (0x137020) from perf table drm/nvc0/pm: correct core/mem/shader perflvl parsing drm/nouveau/pm: remove memtiming support check when assigning to perflvl drm/nva3: support for memory timing map table drm/nouveau: Associate memtimings with performance levels on cards <= nv98 drm/nva3/pm: initial pass at set_clock() hook drm/nvc0/gr: calculate some more of our magic numbers drm/nv50: respect LVDS link count from EDID on SPWG panels drm/nouveau: recognise DCB connector type 0x41 as LVDS drm/nouveau: fix uninitialised variable warning drm/nouveau: Fix a crash at card takedown for NV40 and older cards drm/nouveau: Free nv04 instmem ramin heap at card takedown drm/nva3: somewhat improve clock reporting drm/nouveau: pull refclk from vbios on limits 0x40 boards drm/nv40/gr: oops, fix random bits getting set in engine obj drm/nv50: improve nv50_pm_get_clock() ...
-
Marcin Slusarz authored
When xorg state tracker wants to hide the cursor it calls set_cursor with NULL buffer_handle and size=0x0, but nouveau refuses to hide it because size is not 64x64... which is a bit odd. Both radeon and intel check buffer_handle before validating size of cursor, so make nouveau implementation consistent with them. Signed-off-by:
Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
The core/mem/shader clocks don't support the fractional feedback divider, causing our calculated clocks to be off by quite a lot in some cases. To solve this we will switch to a search-based algorithm when fN is NULL. For my NVA8 at PL3, this actually generates identical cooefficients to the binary driver. Hopefully that's a good sign, and that does not break VPLL calculation for someone.. Signed-off-by: -
Ben Skeggs authored
Hopefully this is how we're supposed to correctly handle when the RAMCFG strap is above the number of entries in timing-related tables. It's rather difficult to confirm without finding a configuration where the ram restrict table doesn't map 8-15 back onto 0-7 anyway. There's not a single vbios in the repo which is configured differently.. In any case, this is probably still better than potentially reading outside of the bounds of various tables.. Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
We need to parse some of these other entries still, but I've yet to determine exactly which PLLs the rest map to. Signed-off-by: -
Ben Skeggs authored
Really not necessary here, we want to be able to see if/how we managed to match a timingset to a performance level, even if we can't currently program it. Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Martin Peres authored
v2 (Ben Skeggs): fix ramcfg strap, and remove bogus handling of perf 0x40 Signed-off-by:
Martin Peres <martin.peres@ensi-bourges.fr> Signed-off-by:
-
Ben Skeggs authored
I still discourage anyone from actually doing this yet. Signed-off-by: -
Ben Skeggs authored
Again, doesn't quite match NVIDIA's, but not sure it really matters. This will however, match the same rules we use to calculate the other related grctx magics. Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
After looking at a number of different logs, it appears 0x41 likely indicates the presense of an LVDS panel following the SPWG spec (http://www.spwg.org/) Signed-off-by:
-
Ben Skeggs authored
Looks like a false positive to me, but, anyways! Reported-by:
Jimmy Rentz <jb17bsome@gmail.com> Signed-off-by:
-
Jimmy Rentz authored
NV40 and older cards (pre NV50) reserve a vram bo for the vga memory at card init. This bo is then freed at card shutdown. The problem is that the ttm bo vram manager was already freed. So a crash occurs when the vga bo is freed. The fix is to free the vga bo prior to freeing the ttm bo vram manager. There might be other solutions but this seemed the simplest to me. Signed-off-by:
-
Jimmy Rentz authored
Add a missing nv04 instmem ramin heap shutdown call. Signed-off-by:
-
Ben Skeggs authored
Definitely not 100% correct, but, for the configurations I've seen used it'll read back the correct clocks now. Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Emil Velikov authored
Many of the nv50 cards have their shader and/or memory pll disabled at some stage. This patch addresses those cases, so that the function returns the correct frequency. When the shader pll is disabled, the blob reports 2*core clock Whereas for memory, the data stored in the vbios. This action is incorrect as some vbioses store a clock value that is less than the refference clock of the pll. Thus we are reporting the reff_clk as it is the frequency the pll actually operates v2 - Convert NV_INFO() messages to NV_DEBUG() Provide more information in the actuall message Signed-off-by:
Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by:
-
Martin Peres authored
Signed-off-by:
Stratos Psomadakis <psomas@ece.ntua.gr> Signed-off-by:
-
Ben Skeggs authored
Contents will now be preserved across a suspend, unlike a pinned bo Signed-off-by: -
Ben Skeggs authored
PFIFO kickoff should have handled this for us. Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Allows per-chipset firmware to be installed, and keeps a copy in memory for suspend/resume purposes. Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
In preparation for adding 0x50 support. Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by:
-
