- 21 Nov, 2022 3 commits
-
-
Christoph Hellwig authored
blk_crypto_get_keyslot, blk_crypto_put_keyslot, __blk_crypto_evict_key and __blk_crypto_cfg_supported are only used internally by the blk-crypto code, so move the out of blk-crypto-profile.h, which is included by drivers that supply blk-crypto functionality. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20221114042944.1009870-4-hch@lst.deSigned-off-by:
Jens Axboe <axboe@kernel.dk>
-
Christoph Hellwig authored
Add a blk_crypto_config_supported_natively helper that wraps __blk_crypto_cfg_supported to retrieve the crypto_profile from the request queue. With this fscrypt can stop including blk-crypto-profile.h and rely on the public consumer interface in blk-crypto.h. Signed-off-by:
-
Christoph Hellwig authored
Switch all public blk-crypto interfaces to use struct block_device arguments to specify the device they operate on instead of th request_queue, which is a block layer implementation detail. Signed-off-by:
-
- 16 Nov, 2022 23 commits
-
-
Waiman Long authored
As noted by Michal, the blkg_iostat_set's in the lockless list hold reference to blkg's to protect against their removal. Those blkg's hold reference to blkcg. When a cgroup is being destroyed, cgroup_rstat_flush() is only called at css_release_work_fn() which is called when the blkcg reference count reaches 0. This circular dependency will prevent blkcg from being freed until some other events cause cgroup_rstat_flush() to be called to flush out the pending blkcg stats. To prevent this delayed blkcg removal, add a new cgroup_rstat_css_flush() function to flush stats for a given css and cpu and call it at the blkgs destruction path, blkcg_destroy_blkgs(), whenever there are still some pending stats to be flushed. This will ensure that blkcg reference count can reach 0 ASAP. Signed-off-by:
Waiman Long <longman@redhat.com> Acked-by:
Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20221105005902.407297-4-longman@redhat.comSigned-off-by:
-
Waiman Long authored
For a system with many CPUs and block devices, the time to do blkcg_rstat_flush() from cgroup_rstat_flush() can be rather long. It can be especially problematic as interrupt is disabled during the flush. It was reported that it might take seconds to complete in some extreme cases leading to hard lockup messages. As it is likely that not all the percpu blkg_iostat_set's has been updated since the last flush, those stale blkg_iostat_set's don't need to be flushed in this case. This patch optimizes blkcg_rstat_flush() by keeping a lockless list of recently updated blkg_iostat_set's in a newly added percpu blkcg->lhead pointer. The blkg_iostat_set is added to a lockless list on the update side in blk_cgroup_bio_start(). It is removed from the lockless list when flushed in blkcg_rstat_flush(). Due to racing, it is possible that blk_iostat_set's in the lockless list may have no new IO stats to be flushed, but that is OK. To protect against destruction of blkg, a percpu reference is gotten when putting into the lockless list and put back when removed. When booting up an instrumented test kernel with this patch on a 2-socket 96-thread system with cgroup v2, out of the 2051 calls to cgroup_rstat_flush() after bootup, 1788 of the calls were exited immediately because of empty lockless list. After an all-cpu kernel build, the ratio became 6295424/6340513. That was more than 99%. Signed-off-by:
-
Waiman Long authored
For blkcg_css_alloc(), the only error that will be returned is -ENOMEM. Simplify error handling code by returning this error directly instead of setting an intermediate "ret" variable. Signed-off-by:
Ming Lei <ming.lei@redhat.com> Acked-by:
-
Yu Kuai authored
After creating a dm device, then user can reload such dm with itself, and dead loop will be triggered because dm keep looking up to itself. Test procedures: 1) dmsetup create test --table "xxx sda", assume dm-0 is created 2) dmsetup suspend test 3) dmsetup reload test --table "xxx dm-0" 4) dmsetup resume test Test result: BUG: TASK stack guard page was hit at 00000000736a261f (stack is 000000008d12c88d..00000000c8dd82d5) stack guard page: 0000 [#1] PREEMPT SMP CPU: 29 PID: 946 Comm: systemd-udevd Not tainted 6.1.0-rc3-next-20221101-00006-g17640ca3b0ee #1295 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014 RIP: 0010:dm_prepare_ioctl+0xf/0x1e0 Code: da 48 83 05 4a 7c 99 0b 01 41 89 c4 eb cd e8 b8 1f 40 00 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 57 48 83 05 a1 5a 99 0b 01 <41> 56 49 89 d6 41 55 4c 8d af 90 02 00 00 9 RSP: 0018:ffffc90002090000 EFLAGS: 00010206 RAX: ffff8881049d6800 RBX: ffff88817e589000 RCX: 0000000000000000 RDX: ffffc90002090010 RSI: ffffc9000209001c RDI: ffff88817e589000 RBP: 00000000484a101d R08: 0000000000000000 R09: 0000000000000007 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000005331 R13: 0000000000005331 R14: 0000000000000000 R15: 0000000000000000 FS: 00007fddf9609200(0000) GS:ffff889fbfd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc9000208fff8 CR3: 0000000179043000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> dm_blk_ioctl+0x50/0x1c0 ? dm_prepare_ioctl+0xe0/0x1e0 dm_blk_ioctl+0x88/0x1c0 dm_blk_ioctl+0x88/0x1c0 ......(a lot of same lines) dm_blk_ioctl+0x88/0x1c0 dm_blk_ioctl+0x88/0x1c0 blkdev_ioctl+0x184/0x3e0 __x64_sys_ioctl+0xa3/0x110 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fddf7306577 Code: b3 66 90 48 8b 05 11 89 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e1 88 8 RSP: 002b:00007ffd0b2ec318 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00005634ef478320 RCX: 00007fddf7306577 RDX: 0000000000000000 RSI: 0000000000005331 RDI: 0000000000000007 RBP: 0000000000000007 R08: 00005634ef4843e0 R09: 0000000000000080 R10: 00007fddf75cfb38 R11: 0000000000000246 R12: 00000000030d4000 R13: 0000000000000000 R14: 0000000000000000 R15: 00005634ef48b800 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:dm_prepare_ioctl+0xf/0x1e0 Code: da 48 83 05 4a 7c 99 0b 01 41 89 c4 eb cd e8 b8 1f 40 00 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 57 48 83 05 a1 5a 99 0b 01 <41> 56 49 89 d6 41 55 4c 8d af 90 02 00 00 9 RSP: 0018:ffffc90002090000 EFLAGS: 00010206 RAX: ffff8881049d6800 RBX: ffff88817e589000 RCX: 0000000000000000 RDX: ffffc90002090010 RSI: ffffc9000209001c RDI: ffff88817e589000 RBP: 00000000484a101d R08: 0000000000000000 R09: 0000000000000007 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000005331 R13: 0000000000005331 R14: 0000000000000000 R15: 0000000000000000 FS: 00007fddf9609200(0000) GS:ffff889fbfd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc9000208fff8 CR3: 0000000179043000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: disabled ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Fix the problem by forbidding a disk to create link to itself. Signed-off-by:
Yu Kuai <yukuai3@huawei.com> Reviewed-by:
-
Yu Kuai authored
We hold a reference to the holder kobject for each bd_holder_disk, so to make the code a bit more robust, use a reference to it instead of the block_device. As long as no one clears ->bd_holder_dir in before freeing the disk, this isn't strictly required, but it does make the code more clear and more robust. Orignally-From: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Yu Kuai authored
Currently, the caller of bd_link_disk_holer() get 'bdev' by blkdev_get_by_dev(), which will look up 'bdev' by inode number 'dev'. Howerver, it's possible that del_gendisk() can be called currently, and 'bd_holder_dir' can be freed before bd_link_disk_holer() access it, thus use after free is triggered. t1: t2: bdev = blkdev_get_by_dev del_gendisk kobject_put(bd_holder_dir) kobject_free() bd_link_disk_holder Fix the problem by checking disk is still live and grabbing a reference to 'bd_holder_dir' first in bd_link_disk_holder(). Signed-off-by:
-
Christoph Hellwig authored
Now that dm has been fixed to track of holder registrations before add_disk, the somewhat buggy block layer code can be safely removed. Signed-off-by:
-
Christoph Hellwig authored
dm is a bit special in that it opens the underlying devices. Commit 89f871af ("dm: delay registering the gendisk") tried to accommodate that by allowing to add the holder to the list before add_gendisk and then just add them to sysfs once add_disk is called. But that leads to really odd lifetime problems and error handling problems as we can't know the state of the kobjects and don't unwind properly. To fix this switch to just registering all existing table_devices with the holder code right after add_disk, and remove them before calling del_gendisk. Fixes: 89f871af ("dm: delay registering the gendisk") Reported-by:
Mike Snitzer <snitzer@kernel.org> Link: https://lore.kernel.org/r/20221115141054.1051801-7-yukuai1@huaweicloud.comSigned-off-by:
-
Yu Kuai authored
open_table_device() and close_table_device() is protected by table_devices_lock, hence use it to protect add_disk() and del_gendisk(). Prepare to track per-add_disk holder relations in dm. Signed-off-by:
-
Christoph Hellwig authored
Take the list unlink and free into close_table_device so that no half torn down table_devices exist. Also remove the check for a NULL bdev as that can't happen - open_table_device never adds a table_device to the list that does not have a valid block_device. Signed-off-by:
-
Christoph Hellwig authored
Move all the logic for allocation the table_device and linking it into the list into the open_table_device. This keeps the code tidy and ensures that the table_devices only exist in fully initialized state. Signed-off-by:
-
Christoph Hellwig authored
free_table_devices just warns and frees all table_device structures when the target removal did not remove them. This should never happen, but if it did, just freeing the structure without deleting them from the list or cleaning up the resources would not help at all. So just WARN on a non-empty list instead. Signed-off-by:
-
Christoph Hellwig authored
Zero out the pointer to ->slave_dir so that the holder code doesn't incorrectly treat the object as alive when add_disk failed or after del_gendisk was called. Fixes: 89f871af ("dm: delay registering the gendisk") Reported-by:
-
Gabriel Krisman Bertazi authored
Jan reported the new algorithm as merged might be problematic if the queue being awaken becomes empty between the waitqueue_active inside sbq_wake_ptr check and the wake up. If that happens, wake_up_nr will not wake up any waiter and we loose too many wake ups. In order to guarantee progress, we need to wake up at least one waiter here, if there are any. This now requires trying to wake up from every queue. Instead of walking through all the queues with sbq_wake_ptr, this call moves the wake up inside that function. In a previous version of the patch, I found that updating wake_index several times when walking through queues had a measurable overhead. This ensures we only update it once, at the end. Fixes: 4f8126bb ("sbitmap: Use single per-bitmap counting to wake up queued tags") Reported-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Gabriel Krisman Bertazi <krisman@suse.de> Reviewed-by:
-
Gabriel Krisman Bertazi authored
Sbitmap code will need to know how many waiters were actually woken for its batched wakeups implementation. Return the number of woken exclusive waiters from __wake_up() to facilitate that. Suggested-by:
-
Gabriel Krisman Bertazi authored
When a queue is awaken, the wake_index written by sbq_wake_ptr currently keeps pointing to the same queue. On the next wake up, it will thus retry the same queue, which is unfair to other queues, and can lead to starvation. This patch, moves the index update to happen before the queue is returned, such that it will now try a different queue first on the next wake up, improving fairness. Fixes: 4f8126bb ("sbitmap: Use single per-bitmap counting to wake up queued tags") Reported-by:
-
Christoph Hellwig authored
While the block device code should switch to implementing ->writepages instead of ->writepage eventually, the current implementation is entirely pointless as it does the same looping over ->writepage as the generic code if no ->writepages is present. Remove blkdev_writepages so that we can eventually unexport generic_writepages. Signed-off-by:
-
Pavel Begunkov authored
Now we can use IOCB_ALLOC_CACHE not only for iopoll'ed reads/write but also for normal IRQ driven I/O. Signed-off-by:
Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/fb8bd092ed5a4a3b037e84e4777074d07aa5639a.1667384020.git.asml.silence@gmail.comSigned-off-by:
-
Pavel Begunkov authored
The downside of the bio pcpu cache is that bios of a cpu will be never freed unless there is new I/O issued from that cpu. We currently keep max 512 bios, which feels too much, half it. Signed-off-by:
-
Pavel Begunkov authored
This patch extends REQ_ALLOC_CACHE to IRQ completions, whenever currently it's only limited to iopoll. Instead of guarding the list with irq toggling on alloc, which is expensive, it keeps an additional irq-safe list from which bios are spliced in batches to ammortise overhead. On the put side it toggles irqs, but in many cases they're already disabled and so cheap. Signed-off-by:
-
Pavel Begunkov authored
Extract a helper out of bio_put for recycling into percpu caches. It's a preparation patch without functional changes. Signed-off-by:
-
Pavel Begunkov authored
Biosets keep a mempool, so as long as requests complete we can always can allocate and have forward progress. Percpu bio caches break that assumptions as we may complete into the cache of one CPU and after try and fail to allocate with another CPU. We also can't grab from another CPU's cache without tricky sync. If we're allocating with a bio while the mempool is undersaturated, remove REQ_ALLOC_CACHE flag, so on put it will go straight to mempool. It might try to free into mempool more requests than required, but assuming than there is no memory starvation in the system it'll stabilise and never hit that path. Signed-off-by:
-
Pavel Begunkov authored
Introduce a helper mempool_is_saturated(), which tells if the mempool is under-filled or not. We need it to figure out whether it should be freed right into the mempool or could be cached with top level caches. Signed-off-by:
-
- 14 Nov, 2022 11 commits
-
-
Jens Axboe authored
Merge branch 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-6.2/block Pull MD fixes from Song. * 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md: md/raid1: stop mdx_raid1 thread when raid1 array run failed md/raid5: use bdev_write_cache instead of open coding it md: fix a crash in mempool_free md/raid0, raid10: Don't set discard sectors for request queue md/bitmap: Fix bitmap chunk size overflow issues md: introduce md_ro_state md: factor out __md_set_array_info() lib/raid6: drop RAID6_USE_EMPTY_ZERO_PAGE raid5-cache: use try_cmpxchg in r5l_wake_reclaim drivers/md/md-bitmap: check the return value of md_bitmap_get_counter()
-
Jiang Li authored
fail run raid1 array when we assemble array with the inactive disk only, but the mdx_raid1 thread were not stop, Even if the associated resources have been released. it will caused a NULL dereference when we do poweroff. This causes the following Oops: [ 287.587787] BUG: kernel NULL pointer dereference, address: 0000000000000070 [ 287.594762] #PF: supervisor read access in kernel mode [ 287.599912] #PF: error_code(0x0000) - not-present page [ 287.605061] PGD 0 P4D 0 [ 287.607612] Oops: 0000 [#1] SMP NOPTI [ 287.611287] CPU: 3 PID: 5265 Comm: md0_raid1 Tainted: G U 5.10.146 #0 [ 287.619029] Hardware name: xxxxxxx/To be filled by O.E.M, BIOS 5.19 06/16/2022 [ 287.626775] RIP: 0010:md_check_recovery+0x57/0x500 [md_mod] [ 287.632357] Code: fe 01 00 00 48 83 bb 10 03 00 00 00 74 08 48 89 ...... [ 287.651118] RSP: 0018:ffffc90000433d78 EFLAGS: 00010202 [ 287.656347] RAX: 0000000000000000 RBX: ffff888105986800 RCX: 0000000000000000 [ 287.663491] RDX: ffffc90000433bb0 RSI: 00000000ffffefff RDI: ffff888105986800 [ 287.670634] RBP: ffffc90000433da0 R08: 0000000000000000 R09: c0000000ffffefff [ 287.677771] R10: 0000000000000001 R11: ffffc90000433ba8 R12: ffff888105986800 [ 287.684907] R13: 0000000000000000 R14: fffffffffffffe00 R15: ffff888100b6b500 [ 287.692052] FS: 0000000000000000(0000) GS:ffff888277f80000(0000) knlGS:0000000000000000 [ 287.700149] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 287.705897] CR2: 0000000000000070 CR3: 000000000320a000 CR4: 0000000000350ee0 [ 287.713033] Call Trace: [ 287.715498] raid1d+0x6c/0xbbb [raid1] [ 287.719256] ? __schedule+0x1ff/0x760 [ 287.722930] ? schedule+0x3b/0xb0 [ 287.726260] ? schedule_timeout+0x1ed/0x290 [ 287.730456] ? __switch_to+0x11f/0x400 [ 287.734219] md_thread+0xe9/0x140 [md_mod] [ 287.738328] ? md_thread+0xe9/0x140 [md_mod] [ 287.742601] ? wait_woken+0x80/0x80 [ 287.746097] ? md_register_thread+0xe0/0xe0 [md_mod] [ 287.751064] kthread+0x11a/0x140 [ 287.754300] ? kthread_park+0x90/0x90 [ 287.757974] ret_from_fork+0x1f/0x30 In fact, when raid1 array run fail, we need to do md_unregister_thread() before raid1_free(). Signed-off-by:Jiang Li <jiang.li@ugreen.com> Signed-off-by:
Song Liu <song@kernel.org>
-
Christoph Hellwig authored
Use the bdev_write_cache instead of two equivalent open coded checks. Signed-off-by:
-
Mikulas Patocka authored
There's a crash in mempool_free when running the lvm test shell/lvchange-rebuild-raid.sh. The reason for the crash is this: * super_written calls atomic_dec_and_test(&mddev->pending_writes) and wake_up(&mddev->sb_wait). Then it calls rdev_dec_pending(rdev, mddev) and bio_put(bio). * so, the process that waited on sb_wait and that is woken up is racing with bio_put(bio). * if the process wins the race, it calls bioset_exit before bio_put(bio) is executed. * bio_put(bio) attempts to free a bio into a destroyed bio set - causing a crash in mempool_free. We fix this bug by moving bio_put before atomic_dec_and_test. We also move rdev_dec_pending before atomic_dec_and_test as suggested by Neil Brown. The function md_end_flush has a similar bug - we must call bio_put before we decrement the number of in-progress bios. BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 11557f0067 P4D 11557f0067 PUD 0 Oops: 0002 [#1] PREEMPT SMP CPU: 0 PID: 73 Comm: kworker/0:1 Not tainted 6.1.0-rc3 #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Workqueue: kdelayd flush_expired_bios [dm_delay] RIP: 0010:mempool_free+0x47/0x80 Code: 48 89 ef 5b 5d ff e0 f3 c3 48 89 f7 e8 32 45 3f 00 48 63 53 08 48 89 c6 3b 53 04 7d 2d 48 8b 43 10 8d 4a 01 48 89 df 89 4b 08 <48> 89 2c d0 e8 b0 45 3f 00 48 8d 7b 30 5b 5d 31 c9 ba 01 00 00 00 RSP: 0018:ffff88910036bda8 EFLAGS: 00010093 RAX: 0000000000000000 RBX: ffff8891037b65d8 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000202 RDI: ffff8891037b65d8 RBP: ffff8891447ba240 R08: 0000000000012908 R09: 00000000003d0900 R10: 0000000000000000 R11: 0000000000173544 R12: ffff889101a14000 R13: ffff8891562ac300 R14: ffff889102b41440 R15: ffffe8ffffa00d05 FS: 0000000000000000(0000) GS:ffff88942fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000001102e99000 CR4: 00000000000006b0 Call Trace: <TASK> clone_endio+0xf4/0x1c0 [dm_mod] clone_endio+0xf4/0x1c0 [dm_mod] __submit_bio+0x76/0x120 submit_bio_noacct_nocheck+0xb6/0x2a0 flush_expired_bios+0x28/0x2f [dm_delay] process_one_work+0x1b4/0x300 worker_thread+0x45/0x3e0 ? rescuer_thread+0x380/0x380 kthread+0xc2/0x100 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Modules linked in: brd dm_delay dm_raid dm_mod af_packet uvesafb cfbfillrect cfbimgblt cn cfbcopyarea fb font fbdev tun autofs4 binfmt_misc configfs ipv6 virtio_rng virtio_balloon rng_core virtio_net pcspkr net_failover failover qemu_fw_cfg button mousedev raid10 raid456 libcrc32c async_raid6_recov async_memcpy async_pq raid6_pq async_xor xor async_tx raid1 raid0 md_mod sd_mod t10_pi crc64_rocksoft crc64 virtio_scsi scsi_mod evdev psmouse bsg scsi_common [last unloaded: brd] CR2: 0000000000000000 ---[ end trace 0000000000000000 ]--- Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Xiao Ni authored
It should use disk_stack_limits to get a proper max_discard_sectors rather than setting a value by stack drivers. And there is a bug. If all member disks are rotational devices, raid0/raid10 set max_discard_sectors. So the member devices are not ssd/nvme, but raid0/raid10 export the wrong value. It reports warning messages in function __blkdev_issue_discard when mkfs.xfs like this: [ 4616.022599] ------------[ cut here ]------------ [ 4616.027779] WARNING: CPU: 4 PID: 99634 at block/blk-lib.c:50 __blkdev_issue_discard+0x16a/0x1a0 [ 4616.140663] RIP: 0010:__blkdev_issue_discard+0x16a/0x1a0 [ 4616.146601] Code: 24 4c 89 20 31 c0 e9 fe fe ff ff c1 e8 09 8d 48 ff 4c 89 f0 4c 09 e8 48 85 c1 0f 84 55 ff ff ff b8 ea ff ff ff e9 df fe ff ff <0f> 0b 48 8d 74 24 08 e8 ea d6 00 00 48 c7 c6 20 1e 89 ab 48 c7 c7 [ 4616.167567] RSP: 0018:ffffaab88cbffca8 EFLAGS: 00010246 [ 4616.173406] RAX: ffff9ba1f9e44678 RBX: 0000000000000000 RCX: ffff9ba1c9792080 [ 4616.181376] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9ba1c9792080 [ 4616.189345] RBP: 0000000000000cc0 R08: ffffaab88cbffd10 R09: 0000000000000000 [ 4616.197317] R10: 0000000000000012 R11: 0000000000000000 R12: 0000000000000000 [ 4616.205288] R13: 0000000000400000 R14: 0000000000000cc0 R15: ffff9ba1c9792080 [ 4616.213259] FS: 00007f9a5534e980(0000) GS:ffff9ba1b7c80000(0000) knlGS:0000000000000000 [ 4616.222298] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4616.228719] CR2: 000055a390a4c518 CR3: 0000000123e40006 CR4: 00000000001706e0 [ 4616.236689] Call Trace: [ 4616.239428] blkdev_issue_discard+0x52/0xb0 [ 4616.244108] blkdev_common_ioctl+0x43c/0xa00 [ 4616.248883] blkdev_ioctl+0x116/0x280 [ 4616.252977] __x64_sys_ioctl+0x8a/0xc0 [ 4616.257163] do_syscall_64+0x5c/0x90 [ 4616.261164] ? handle_mm_fault+0xc5/0x2a0 [ 4616.265652] ? do_user_addr_fault+0x1d8/0x690 [ 4616.270527] ? do_syscall_64+0x69/0x90 [ 4616.274717] ? exc_page_fault+0x62/0x150 [ 4616.279097] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 4616.284748] RIP: 0033:0x7f9a55398c6b Signed-off-by:
Xiao Ni <xni@redhat.com> Reported-by:
Yi Zhang <yi.zhang@redhat.com> Reviewed-by:
-
Florian-Ewald Mueller authored
- limit bitmap chunk size internal u64 variable to values not overflowing the u32 bitmap superblock structure variable stored on persistent media - assign bitmap chunk size internal u64 variable from unsigned values to avoid possible sign extension artifacts when assigning from a s32 value The bug has been there since at least kernel 4.0. Steps to reproduce it: 1: mdadm -C /dev/mdx -l 1 --bitmap=internal --bitmap-chunk=256M -e 1.2 -n2 /dev/rnbd1 /dev/rnbd2 2 resize member device rnbd1 and rnbd2 to 8 TB 3 mdadm --grow /dev/mdx --size=max The bitmap_chunksize will overflow without patch. Cc: stable@vger.kernel.org Signed-off-by:
Florian-Ewald Mueller <florian-ewald.mueller@ionos.com> Signed-off-by:
Jack Wang <jinpu.wang@ionos.com> Signed-off-by:
-
Ye Bin authored
Introduce md_ro_state for mddev->ro, so it is easy to understand. Signed-off-by:
Ye Bin <yebin10@huawei.com> Signed-off-by:
-
Ye Bin authored
Factor out __md_set_array_info(). No functional change. Signed-off-by:
-
Giulio Benetti authored
RAID6_USE_EMPTY_ZERO_PAGE is unused and hardcoded to 0, so let's drop it. Signed-off-by:
Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by:
-
Uros Bizjak authored
Use try_cmpxchg instead of cmpxchg (*ptr, old, new) == old in r5l_wake_reclaim. 86 CMPXCHG instruction returns success in ZF flag, so this change saves a compare after cmpxchg (and related move instruction in front of cmpxchg). Also, try_cmpxchg implicitly assigns old *ptr value to "old" when cmpxchg fails. There is no need to re-read the value in the loop. Note that the value from *ptr should be read using READ_ONCE to prevent the compiler from merging, refetching or reordering the read. No functional change intended. Cc: Song Liu <song@kernel.org> Signed-off-by:
Uros Bizjak <ubizjak@gmail.com> Signed-off-by:
-
Li Zhong authored
Check the return value of md_bitmap_get_counter() in case it returns NULL pointer, which will result in a null pointer dereference. v2: update the check to include other dereference Signed-off-by:
Li Zhong <floridsleeves@gmail.com> Signed-off-by:
-
- 11 Nov, 2022 1 commit
-
-
Gabriel Krisman Bertazi authored
sbitmap suffers from code complexity, as demonstrated by recent fixes, and eventual lost wake ups on nested I/O completion. The later happens, from what I understand, due to the non-atomic nature of the updates to wait_cnt, which needs to be subtracted and eventually reset when equal to zero. This two step process can eventually miss an update when a nested completion happens to interrupt the CPU in between the wait_cnt updates. This is very hard to fix, as shown by the recent changes to this code. The code complexity arises mostly from the corner cases to avoid missed wakes in this scenario. In addition, the handling of wake_batch recalculation plus the synchronization with sbq_queue_wake_up is non-trivial. This patchset implements the idea originally proposed by Jan [1], which removes the need for the two-step updates of wait_cnt. This is done by tracking the number of completions and wakeups in always increasing, per-bitmap counters. Instead of having to reset the wait_cnt when it reaches zero, we simply keep counting, and attempt to wake up N threads in a single wait queue whenever there is enough space for a batch. Waking up less than batch_wake shouldn't be a problem, because we haven't changed the conditions for wake up, and the existing batch calculation guarantees at least enough remaining completions to wake up a batch for each queue at any time. Performance-wise, one should expect very similar performance to the original algorithm for the case where there is no queueing. In both the old algorithm and this implementation, the first thing is to check ws_active, which bails out if there is no queueing to be managed. In the new code, we took care to avoid accounting completions and wakeups when there is no queueing, to not pay the cost of atomic operations unnecessarily, since it doesn't skew the numbers. For more interesting cases, where there is queueing, we need to take into account the cross-communication of the atomic operations. I've been benchmarking by running parallel fio jobs against a single hctx nullb in different hardware queue depth scenarios, and verifying both IOPS and queueing. Each experiment was repeated 5 times on a 20-CPU box, with 20 parallel jobs. fio was issuing fixed-size randwrites with qd=64 against nullb, varying only the hardware queue length per test. queue size 2 4 8 16 32 64 6.1-rc2 1681.1K (1.6K) 2633.0K (12.7K) 6940.8K (16.3K) 8172.3K (617.5K) 8391.7K (367.1K) 8606.1K (351.2K) patched 1721.8K (15.1K) 3016.7K (3.8K) 7543.0K (89.4K) 8132.5K (303.4K) 8324.2K (230.6K) 8401.8K (284.7K) The following is a similar experiment, ran against a nullb with a single bitmap shared by 20 hctx spread across 2 NUMA nodes. This has 40 parallel fio jobs operating on the same device queue size 2 4 8 16 32 64 6.1-rc2 1081.0K (2.3K) 957.2K (1.5K) 1699.1K (5.7K) 6178.2K (124.6K) 12227.9K (37.7K) 13286.6K (92.9K) patched 1081.8K (2.8K) 1316.5K (5.4K) 2364.4K (1.8K) 6151.4K (20.0K) 11893.6K (17.5K) 12385.6K (18.4K) It has also survived blktests and a 12h-stress run against nullb. I also ran the code against nvme and a scsi SSD, and I didn't observe performance regression in those. If there are other tests you think I should run, please let me know and I will follow up with results. [1] https://lore.kernel.org/all/aef9de29-e9f5-259a-f8be-12d1b734e72@google.com/ Cc: Hugh Dickins <hughd@google.com> Cc: Keith Busch <kbusch@kernel.org> Cc: Liu Song <liusong@linux.alibaba.com> Suggested-by:
-
- 10 Nov, 2022 2 commits
-
-
Christoph Hellwig authored
Use set->nr_hw_queues for the current number of tags, and remove the duplicate set->nr_hw_queues update in the caller. Signed-off-by:
Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20221109100811.2413423-2-hch@lst.deSigned-off-by:
-
Christoph Hellwig authored
There is no point in trying to share any code with the realloc case when all that is needed by the initial tagset allocation is a simple kcalloc_node. Signed-off-by:
-
