Besides the alarm, the PCF8563 also has a timer triggered interrupt.
In cases where the previous system left the timer and interrupts on,
or somehow the bits got enabled, the interrupt would keep triggering
as the kernel doesn't know about it.

Clear both the alarm and timer event flags, and disable the interrupts,
before requesting the interrupt line.

Fixes: ede3e9d4 ("drivers/rtc/rtc-pcf8563.c: add alarm support")
Fixes: a45d528a ("rtc: pcf8563: clear expired alarm at boot time")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

The PCF8563 datasheet says the interrupt line is active low and stays
active until the events are cleared, i.e. a level trigger interrupt.

Fix the flags used to request the interrupt.

Fixes: ede3e9d4 ("drivers/rtc/rtc-pcf8563.c: add alarm support")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Using result = (value + divisor/2) / divisor is rounding values up and only
works well for positive values. Instead use DIV_ROUND_CLOSEST which does
the correct thing.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Allows alarm to be controlled using, e.g., the RTC_WKALM_SET ioctl.
Signed-off-by: Dylan Howey <Dylan.Howey@tennantco.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Use %ptR to print date in human readable format.
Signed-off-by: Dylan Howey <Dylan.Howey@tennantco.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Also remove pcf2123_delay_trec. This claimed to add a 30ns delay to SPI
writes, but I could not see any reference to this requirement in the
datasheet. Closest thing I could find to a requirement are timings for the
SPI chip enable line, which cannot be controlled by this driver (the ndelay
came after the call to spi_write_then_read, which means it would sleep
after CE has already gone inactive). Things seem to work fine without it.
Signed-off-by: Dylan Howey <Dylan.Howey@tennantco.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Use regmap debugfs register view instead.
Signed-off-by: Dylan Howey <Dylan.Howey@tennantco.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

We have a dedicated pointer for that, so use it. Much easier to read and
less computation involved.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

We have a dedicated pointer for that, so use it. Much easier to read and
less computation involved.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

We have a dedicated pointer for that, so use it. Much easier to read and
less computation involved.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

We have a dedicated pointer for that, so use it. Much easier to read and
less computation involved.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

We have a dedicated pointer for that, so use it. Much easier to read and
less computation involved.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

RTC driver was converted to OF driver long time ago. The MODULE_ALIAS
macro has no effect for the OF drivers since the alias is overridden by
the drivers core to follow the OF naming convention of the driver's alias,
which is based on the device-tree matching name.

$ cat /sys/devices/soc0/7000e000.rtc/modalias
of:NrtcT(null)Cnvidia,tegra20-rtc
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

The R40 has a quite different RTC, with only a single interrupt line, but
two clock outputs. Let's add a compatible.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

The R40 has a pretty different RTC compared to the other SoCs we've
encountered so far, the most important difference being that it now has
only a single interrupt, compared to the previous SoCs having two.

Let's add a compatible for that.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

The newer Allwinner SoCs have an embedded RTC supported in Linux, with a
matching Device Tree binding.

Now that we have the DT validation in place, let's convert the device tree
bindings for that controller over to a YAML schemas.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

The older Allwinner SoCs have an embedded RTC supported in Linux, with a
matching Device Tree binding.

Now that we have the DT validation in place, let's convert the device tree
bindings for that controller over to a YAML schemas.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

The RTC generic bindings has a bunch of devices that have a pretty simple
binding, with just compatible, reg and optional interrupts properties.

This is exactly what the trivial devices YAML schema has been created for,
except that they can also have the start-year property, but not any other
generic RTC property.

Let's create a schema with those constraints.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

The real time clocks have a bunch of generic properties that are needed in
a device tree. Add a YAML schemas for those.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Add i.MX system controller RTC alarm support, the RTC alarm
is implemented via SIP(silicon provider) runtime service call
and ARM-Trusted-Firmware will communicate with system controller
via MU(message unit) IPC to set RTC alarm. When RTC alarm fires,
system controller will generate a common MU irq event and notify
system controller RTC driver to handle the irq event.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Fix an obvious typo: in read_alarm() call we should read alarm setting
(starting at ALARM_SECONDS register) and not current time.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

TPS65910 entry is already under 'if RTC_CLASS' - remove superfluous
dependency.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Drivers registered with module_platform_driver_probe() are considered
non-hotpluggable, which among other things means that they don't support
deferred probe. However, recent changes in how the ARM SMMU works have
required the BPMP (which is the clock provider on Tegra186 and later) be
bound to the SMMU, which in turn means that the BPMP driver can defer
probe and hence clocks become available much later than they used to.
For most other drivers this is not a problem because they already
properly support deferred probe, but rtc-tegra is the odd one out that
now fails to probe and will therefore never be registered.

Fix this by making the driver a regular driver that supports unloading
and deferred probe.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Many of the variables have redundant prefixes or suffixes. Drop all of
them where not necessary for context. Also make sure to use data types
consistently. For instance, values read from 32-bit register accessors
should be stored in u32.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

This set of changes fixes some checkpatch warnings as well as a number
of punctuation and padding inconsistencies.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

The RTC core already ensures the alarm is set to a time in the future, it
is not necessary to check again in the driver.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Stop enabling the oscillator and removing the oscillator failure flags in
probe. Instead, return -EINVAL in .read_time when the oscillaotr is not
start or when it failed at some point. The oscillator gets enabled on the
first .set_time after failure and the failure flags are cleared.

This also removes the possibility of an infinite loop at probe where a
failing RTC will make the goto read_rtc to be taken every time.

Tested on mcp79411.
Reported-by: Mastro Gippo <gipmad@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

To be consistent change the S35390A_FLAG defines to use the BIT
macro (like the S35390A_INT2_MODE defines).
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

To simplify access and shorten code introduce a struct device pointer in
the s35390a probe function.
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Alarms are only supported on a per minute basis. This is why
uie_unsupported is set. Furthermore issue a warning when a second based
alarm is requested.
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Fix the INT2 mode mask to not include the "TEST" flag. Furthermore
remove the not needed reversion of bits when parsing the INT2 modes.
Instead reverse the INT2_MODE defines to match the bit order from the
datasheet.

Additionally mention the flag names from the datasheet for the different
modes in the comments.
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Alarmtimer interface uses only the RTC with wekeup flags enabled.
Allow to use rtc-test driver with alarmtimer interface.
Signed-off-by: Roman Stratiienko <roman.stratiienko@globallogic.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Converting from hardware to host endiannes was done using reassignment
to the same variable which makes sparse unhappy as it can not verify
the endiannes handling properly. To allow sparse to verify endiannes
handling an explicit __le32 is introduced. Note that this patch does
not change the generated binary (x86_64 and ppc64 binary diff).
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Pull UBIFS fixes from Richard Weinberger:

 - build errors wrt xattrs

 - mismerge which lead to a wrong Kconfig ifdef

 - missing endianness conversion

* tag 'upstream-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
  ubifs: Convert xattr inum to host order
  ubifs: Use correct config name for encryption
  ubifs: Fix build error without CONFIG_UBIFS_FS_XATTR

Merge yet more updates from Andrew Morton:
 "A few final bits:

   - large changes to vmalloc, yielding large performance benefits

   - tweak the console-flush-on-panic code

   - a few fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  panic: add an option to replay all the printk message in buffer
  initramfs: don't free a non-existent initrd
  fs/writeback.c: use rcu_barrier() to wait for inflight wb switches going into workqueue when umount
  mm/compaction.c: correct zone boundary handling when isolating pages from a pageblock
  mm/vmap: add DEBUG_AUGMENT_LOWEST_MATCH_CHECK macro
  mm/vmap: add DEBUG_AUGMENT_PROPAGATE_CHECK macro
  mm/vmalloc.c: keep track of free blocks for vmap allocation

Pull more Kbuild updates from Masahiro Yamada:

 - remove unneeded use of cc-option, cc-disable-warning, cc-ldoption

 - exclude tracked files from .gitignore

 - re-enable -Wint-in-bool-context warning

 - refactor samples/Makefile

 - stop building immediately if syncconfig fails

 - do not sprinkle error messages when $(CC) does not exist

 - move arch/alpha/defconfig to the configs subdirectory

 - remove crappy header search path manipulation

 - add comment lines to .config to clarify the end of menu blocks

 - check uniqueness of module names (adding new warnings intentionally)

* tag 'kbuild-v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (24 commits)
  kconfig: use 'else ifneq' for Makefile to improve readability
  kbuild: check uniqueness of module names
  kconfig: Terminate menu blocks with a comment in the generated config
  kbuild: add LICENSES to KBUILD_ALLDIRS
  kbuild: remove 'addtree' and 'flags' magic for header search paths
  treewide: prefix header search paths with $(srctree)/
  media: prefix header search paths with $(srctree)/
  media: remove unneeded header search paths
  alpha: move arch/alpha/defconfig to arch/alpha/configs/defconfig
  kbuild: terminate Kconfig when $(CC) or $(LD) is missing
  kbuild: turn auto.conf.cmd into a mandatory include file
  .gitignore: exclude .get_maintainer.ignore and .gitattributes
  kbuild: add all Clang-specific flags unconditionally
  kbuild: Don't try to add '-fcatch-undefined-behavior' flag
  kbuild: add some extra warning flags unconditionally
  kbuild: add -Wvla flag unconditionally
  arch: remove dangling asm-generic wrappers
  samples: guard sub-directories with CONFIG options
  kbuild: re-enable int-in-bool-context warning
  MAINTAINERS: kbuild: Add pattern for scripts/*vmlinux*
  ...

Pull i2c updates from Wolfram Sang:
 "Some I2C core API additions which are kind of simple but enhance error
  checking for users a lot, especially by returning errno now.

  There are wrappers to still support the old API but it will be removed
  once all users are converted"

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: core: add device-managed version of i2c_new_dummy
  i2c: core: improve return value handling of i2c_new_device and i2c_new_dummy

Pull ext4 fixes from Ted Ts'o:
 "Some bug fixes, and an update to the URL's for the final version of
  Unicode 12.1.0"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: avoid panic during forced reboot due to aborted journal
  ext4: fix block validity checks for journal inodes using indirect blocks
  unicode: update to Unicode 12.1.0 final
  unicode: add missing check for an error return from utf8lookup()
  ext4: fix miscellaneous sparse warnings
  ext4: unsigned int compared against zero
  ext4: fix use-after-free in dx_release()
  ext4: fix data corruption caused by overlapping unaligned and aligned IO
  jbd2: fix potential double free
  ext4: zero out the unused memory region in the extent tree block

Pull cifs fixes from Steve French:
 "Minor cleanup and fixes, one for stable, four rdma (smbdirect)
  related. Also adds SEEK_HOLE support"

* tag '5.2-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: add support for SEEK_DATA and SEEK_HOLE
  Fixed https://bugzilla.kernel.org/show_bug.cgi?id=202935 allow write on the same file
  cifs: Allocate memory for all iovs in smb2_ioctl
  cifs: Don't match port on SMBDirect transport
  cifs:smbd Use the correct DMA direction when sending data
  cifs:smbd When reconnecting to server, call smbd_destroy() after all MIDs have been called
  cifs: use the right include for signal_pending()
  smb3: trivial cleanup to smb2ops.c
  cifs: cleanup smb2ops.c and normalize strings
  smb3: display session id in debug data