- 01 Jun, 2024 3 commits
-
-
Alexis Lothoré authored
This reverts commit 35aee01f Commit 35aee01f ("wifi: wilc1000: set atomic flag on kmemdup in srcu critical section") was preparatory to the SRCU to RCU conversion done by commit f236464f ("wifi: wilc1000: convert list management to RCU"). This conversion brought issues and so has been reverted, so the atomic flag is not needed anymore. Signed-off-by:
Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240528-wilc_revert_srcu_to_rcu-v1-2-bce096e0798c@bootlin.com
-
Alexis Lothoré authored
This reverts commit f236464f Commit f236464f ("wifi: wilc1000: convert list management to RCU") replaced SRCU with RCU, aiming to simplify RCU usage in the driver. No documentation or commit history hinted about why SRCU has been preferred in original design, so it has been assumed to be safe to do this conversion. Unfortunately, some static analyzers raised warnings, confirmed by runtime checker, not long after the merge. At least three different issues arose when switching to RCU: - wilc_wlan_txq_filter_dup_tcp_ack is executed in a RCU read critical section yet calls wait_for_completion_timeout - wilc_wfi_init_mon_interface calls kmalloc and register_netdevice while manipulating a vif retrieved from vif list - set_channel sends command to chip (and so, also waits for a completion) while holding a vif retrieved from vif list (so, in RCU read critical section) Some of those issues are not trivial to fix and would need bigger driver rework. Fix those issues by reverting the SRCU to RCU conversion commit Reported-by:
Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/linux-wireless/3b46ec7c-baee-49fd-b760-3bc12fb12eaf@moroto.mountain/ Fixes: f236464f ("wifi: wilc1000: convert list management to RCU") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/athKalle Valo authored
Merge ath-current from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git ath.git fixes for 6.10. Two fixes for user reported regressions in ath11k. One dependency fix and one error path fix.
-
- 29 May, 2024 28 commits
-
-
Dmitry Antipov authored
When testing the previous patch with CONFIG_UBSAN_BOUNDS, I've noticed the following: UBSAN: array-index-out-of-bounds in net/mac80211/scan.c:372:4 index 0 is out of range for type 'struct ieee80211_channel *[]' CPU: 0 PID: 1435 Comm: wpa_supplicant Not tainted 6.9.0+ #1 Hardware name: LENOVO 20UN005QRT/20UN005QRT <...BIOS details...> Call Trace: <TASK> dump_stack_lvl+0x2d/0x90 __ubsan_handle_out_of_bounds+0xe7/0x140 ? timerqueue_add+0x98/0xb0 ieee80211_prep_hw_scan+0x2db/0x480 [mac80211] ? __kmalloc+0xe1/0x470 __ieee80211_start_scan+0x541/0x760 [mac80211] rdev_scan+0x1f/0xe0 [cfg80211] nl80211_trigger_scan+0x9b6/0xae0 [cfg80211] ...<the rest is not too useful...> Since '__ieee80211_start_scan()' leaves 'hw_scan_req->req.n_channels' uninitialized, actual boundaries of 'hw_scan_req->req.channels' can't be checked in 'ieee80211_prep_hw_scan()'. Although an initialization of 'hw_scan_req->req.n_channels' introduces some confusion around allocated vs. used VLA members, this shouldn't be a problem since everything is correctly adjusted soon in 'ieee80211_prep_hw_scan()'. Cleanup 'kmalloc()' math in '__ieee80211_start_scan()' by using the convenient 'struct_size()' as well. Signed-off-by:
Dmitry Antipov <dmantipov@yandex.ru> Link: https://msgid.link/20240517153332.18271-2-dmantipov@yandex.ru [improve (imho) indentation a bit] Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Lingbo Kong authored
Currently, the way of parsing Spatial Reuse Parameter Set element is incorrect and some members of struct ieee80211_he_obss_pd are not assigned. To address this issue, it must be parsed in the order of the elements of Spatial Reuse Parameter Set defined in the IEEE Std 802.11ax specification. The diagram of the Spatial Reuse Parameter Set element (IEEE Std 802.11ax -2021-9.4.2.252). ------------------------------------------------------------------------- | | | | |Non-SRG| SRG | SRG | SRG | SRG | |Element|Length| Element | SR |OBSS PD|OBSS PD|OBSS PD| BSS |Partial| | ID | | ID |Control| Max | Min | Max |Color | BSSID | | | |Extension| | Offset| Offset|Offset |Bitmap|Bitmap | ------------------------------------------------------------------------- Fixes: 1ced169c ("mac80211: allow setting spatial reuse parameters from bss_conf") Signed-off-by:
Lingbo Kong <quic_lingbok@quicinc.com> Link: https://msgid.link/20240516021854.5682-3-quic_lingbok@quicinc.comSigned-off-by:
-
Lingbo Kong authored
Currently, the way to check the size of Spatial Reuse IE data in the ieee80211_parse_extension_element() is incorrect. This is because the len variable in the ieee80211_parse_extension_element() function is equal to the size of Spatial Reuse IE data minus one and the value of returned by the ieee80211_he_spr_size() function is equal to the length of Spatial Reuse IE data. So the result of the len >= ieee80211_he_spr_size(data) statement always false. To address this issue and make it consistent with the logic used elsewhere with ieee80211_he_oper_size(), change the "len >= ieee80211_he_spr_size(data)" to “len >= ieee80211_he_spr_size(data) - 1”. Fixes: 9d0480a7 ("wifi: mac80211: move element parsing to a new file") Signed-off-by:
-
Emmanuel Grumbach authored
In case the firmware sends a notification that claims it has more data than it has, we will read past that was allocated for the notification. Remove the print of the buffer, we won't see it by default. If needed, we can see the content with tracing. This was reported by KFENCE. Fixes: bdccdb85 ("iwlwifi: mvm: support MFUART dump in case of MFUART assert") Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by:
Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240513132416.ba82a01a559e.Ia91dd20f5e1ca1ad380b95e68aebf2794f553d9b@changeidSigned-off-by:
-
Ilan Peer authored
When HW rfkill is toggled to disable the RF, the flow to stop scan is called. When trying to send the command to abort the scan, since HW rfkill is toggled, the command is not sent due to rfkill being asserted, and -ERFKILL is returned from iwl_trans_send_cmd(), but this is silently ignored in iwl_mvm_send_cmd() and thus the scan abort flow continues to wait for scan complete notification and fails. Since it fails, the UID to type mapping is not cleared, and thus a warning is later fired when trying to stop the interface. To fix this, modify the UMAC scan abort flow to force sending the scan abort command even when in rfkill, so stop the FW from accessing the radio etc. Signed-off-by:
Ilan Peer <ilan.peer@intel.com> Signed-off-by:
-
Miri Korenblit authored
In some versions of cfg80211, the ssids poinet might be a valid one even though n_ssids is 0. Accessing the pointer in this case will cuase an out-of-bound access. Fix this by checking n_ssids first. Fixes: c1a75153 ("iwlwifi: mvm: add adaptive dwell support") Signed-off-by:
-
Ayala Beker authored
Ensure that the 6 GHz channel is configured with a valid direct BSSID, avoiding any invalid or multicast BSSID addresses. Signed-off-by:
Ayala Beker <ayala.beker@intel.com> Reviewed-by:
-
Johannes Berg authored
When entering RF-kill, mac80211 tears down BA sessions, but due to RF-kill the commands aren't sent to the device. As a result, there can be frames pending on the reorder buffer or perhaps even received while doing so, leading to warnings. Avoid the warnings by doing the BA session teardown normally even in RF-kill, which also requires queue sync. Signed-off-by:
-
Yedidya Benshimol authored
The BIGTK cipher field was added to the kek_kck_material_cmd but wasn't assigned. Fix that by differentiating between the IGTK/BIGTK keys and assign the ciphers fields accordingly. Signed-off-by:
Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by:
-
Benjamin Berg authored
If pre-recovery mac80211 tried to disable a link but this disablement failed, then there might be a mismatch between mac80211 assuming the link has been disabled and the driver still having the data around. During recover itself, that is not a problem, but should the link be activated again at a later point, iwlwifi will refuse the activation as it detects the inconsistent state. Solve this corner-case by iterating the station in the restart cleanup handler. Signed-off-by:
Benjamin Berg <benjamin.berg@intel.com> Signed-off-by:
-
Shahar S Matityahu authored
The driver should call iwl_dbg_tlv_free even if debugfs is not defined since ini mode does not depend on debugfs ifdef. Fixes: 68f6f492 ("iwlwifi: trans: support loading ini TLVs from external file") Signed-off-by:
Shahar S Matityahu <shahar.s.matityahu@intel.com> Reviewed-by:
Luciano Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Mordechay Goodstein authored
In the driver we only use skb_put* for adding data to the skb, hence data never moves and skb_reset_mac_haeder would set mac_header to the first time data was added and not to mac80211 header, fix this my using the actual len of bytes added for setting the mac header. Fixes: 3f7a9d57 ("wifi: iwlwifi: mvm: simplify by using SKB MAC header pointer") Signed-off-by:
Mordechay Goodstein <mordechay.goodstein@intel.com> Reviewed-by:
-
Johannes Berg authored
We don't actually support >64 even for HE devices, so revert back to 64. This fixes an issue where the session is refused because the queue is configured differently from the actual session later. Fixes: 514c3069 ("iwlwifi: add support for IEEE802.11ax") Signed-off-by:
Liad Kaufman <liad.kaufman@intel.com> Reviewed-by:
-
Yedidya Benshimol authored
After moving from commands to notificaitons in the d3 resume flow, removing the WOWLAN_GET_STATUSES and REPLY_OFFLOADS_QUERY_CMD causes the return of the default value when looking up their version. Returning zero here results in the driver sending the not supported NON_QOS_TX_COUNTER_CMD. Signed-off-by:
Gregory Greenman <gregory.greenman@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
Since IWL_FW_CMD_VER_UNKNOWN = 99, then my change to consider cmd_ver >= 7 instead of cmd_ver = 7 included also firmwares that don't advertise the command version at all. This made us send a command with a bad size and because of that, the firmware hit a BAD_COMMAND immediately after handling the REDUCE_TX_POWER_CMD command. Fixes: 8f892e22 ("wifi: iwlwifi: mvm: support iwl_dev_tx_power_cmd_v8") Signed-off-by:
-
Shaul Triebitz authored
In beacon template version 14, make sure to always set the TWT IE offset before sending the beacon template command, also in the debugfs inject_beacon_ie path. If the TWT IE does not exist, the offset will be set to zero. Fixes: bf0212fd ("wifi: iwlwifi: mvm: add beacon template version 14") Signed-off-by:
Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by:
-
Miri Korenblit authored
The initialization of this worker moved to iwl_mvm_mac_init_mvmvif but we removed only from the pre-MLD version of the add_interface callback. Remove it also from the MLD version. Fixes: 0bcc2155 ("wifi: iwlwifi: mvm: init vif works only once") Signed-off-by:
-
Aditya Kumar Singh authored
Original changes[1] posted is having proper changes. However, at the same time, there was chandef puncturing changes which had a conflict with this. While applying, two errors crept in - a) Whitespace error. b) Link ID being passed to channel switch started notifier function is 0. However proper link ID is present in the function. Fix these now. [1] https://lore.kernel.org/all/20240130140918.1172387-5-quic_adisi@quicinc.com/ Fixes: 1a96bb4e ("wifi: mac80211: start and finalize channel switch on link basis") Signed-off-by:Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://msgid.link/20240509032555.263933-1-quic_adisi@quicinc.comSigned-off-by:
-
Johannes Berg authored
The 6 GHz scan request struct allocated by cfg80211_scan_6ghz() is meant to be formed this way: [base struct][channels][ssids][6ghz_params] It is allocated with [channels] as the maximum number of channels supported by the driver in the 6 GHz band, since allocation is before knowing how many there will be. However, the inner pointers are set incorrectly: initially, the 6 GHz scan parameters pointer is set: [base struct][channels] ^ scan_6ghz_params and later the SSID pointer is set to the end of the actually _used_ channels. [base struct][channels] ^ ssids If many APs were to be discovered, and many channels used, and there were many SSIDs, then the SSIDs could overlap the 6 GHz parameters. Additionally, the request->ssids for most of the function points to the original request still (given the struct copy) but is used normally, which is confusing. Clear this up, by actually using the allocated space for 6 GHz parameters _after_ the SSIDs, and set up the SSIDs initially so they are used more clearly. Just like in nl80211.c, set them only if there actually are SSIDs though. Finally, also copy the elements (ie/ie_len) so they're part of the same request, not pointing to the old request. Co-developed-by: -
Johannes Berg authored
The code itself doesn't want to handle frames from the driver if it's already stopped, but if the tasklet was queued before and runs after the stop, then all bets are off. Flush queues before actually stopping, RX should be off at this point since all the interfaces are removed already, etc. Reported-by: syzbot+8830db5d3593b5546d2e@syzkaller.appspotmail.com Link: https://msgid.link/20240515135318.b05f11385c9a.I41c1b33a2e1814c3a7ef352cd7f2951b91785617@changeidSigned-off-by:
-
Johannes Berg authored
If the interface isn't enabled, don't apply multicast rate changes immediately. Reported-by: syzbot+de87c09cc7b964ea2e23@syzkaller.appspotmail.com Link: https://msgid.link/20240515133410.d6cffe5756cc.I47b624a317e62bdb4609ff7fa79403c0c444d32d@changeidSigned-off-by:
-
Lin Ma authored
The commit 9bb7e0f2 ("cfg80211: add peer measurement with FTM initiator API") defines four attributes NL80211_PMSR_FTM_REQ_ATTR_ {NUM_BURSTS_EXP}/{BURST_PERIOD}/{BURST_DURATION}/{FTMS_PER_BURST} in following ways. static const struct nla_policy nl80211_pmsr_ftm_req_attr_policy[NL80211_PMSR_FTM_REQ_ATTR_MAX + 1] = { ... [NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP] = NLA_POLICY_MAX(NLA_U8, 15), [NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD] = { .type = NLA_U16 }, [NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION] = NLA_POLICY_MAX(NLA_U8, 15), [NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST] = NLA_POLICY_MAX(NLA_U8, 31), ... }; That is, those attributes are expected to be NLA_U8 and NLA_U16 types. However, the consumers of these attributes in `pmsr_parse_ftm` blindly all use `nla_get_u32`, which is incorrect and causes functionality issues on little-endian platforms. Hence, fix them with the correct `nla_get_u8` and `nla_get_u16` functions. Fixes: 9bb7e0f2 ("cfg80211: add peer measurement with FTM initiator API") Signed-off-by:
Lin Ma <linma@zju.edu.cn> Link: https://msgid.link/20240521075059.47999-1-linma@zju.edu.cnSigned-off-by:
-
Remi Pommarel authored
Wiphy should be locked before calling rdev_get_station() (see lockdep assert in ieee80211_get_station()). This fixes the following kernel NULL dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000050 Mem abort info: ESR = 0x0000000096000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x06: level 2 translation fault Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000000003001000 [0000000000000050] pgd=0800000002dca003, p4d=0800000002dca003, pud=08000000028e9003, pmd=0000000000000000 Internal error: Oops: 0000000096000006 [#1] SMP Modules linked in: netconsole dwc3_meson_g12a dwc3_of_simple dwc3 ip_gre gre ath10k_pci ath10k_core ath9k ath9k_common ath9k_hw ath CPU: 0 PID: 1091 Comm: kworker/u8:0 Not tainted 6.4.0-02144-g565f9a3a7911-dirty #705 Hardware name: RPT (r1) (DT) Workqueue: bat_events batadv_v_elp_throughput_metric_update pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : ath10k_sta_statistics+0x10/0x2dc [ath10k_core] lr : sta_set_sinfo+0xcc/0xbd4 sp : ffff000007b43ad0 x29: ffff000007b43ad0 x28: ffff0000071fa900 x27: ffff00000294ca98 x26: ffff000006830880 x25: ffff000006830880 x24: ffff00000294c000 x23: 0000000000000001 x22: ffff000007b43c90 x21: ffff800008898acc x20: ffff00000294c6e8 x19: ffff000007b43c90 x18: 0000000000000000 x17: 445946354d552d78 x16: 62661f7200000000 x15: 57464f445946354d x14: 0000000000000000 x13: 00000000000000e3 x12: d5f0acbcebea978e x11: 00000000000000e3 x10: 000000010048fe41 x9 : 0000000000000000 x8 : ffff000007b43d90 x7 : 000000007a1e2125 x6 : 0000000000000000 x5 : ffff0000024e0900 x4 : ffff800000a0250c x3 : ffff000007b43c90 x2 : ffff00000294ca98 x1 : ffff000006831920 x0 : 0000000000000000 Call trace: ath10k_sta_statistics+0x10/0x2dc [ath10k_core] sta_set_sinfo+0xcc/0xbd4 ieee80211_get_station+0x2c/0x44 cfg80211_get_station+0x80/0x154 batadv_v_elp_get_throughput+0x138/0x1fc batadv_v_elp_throughput_metric_update+0x1c/0xa4 process_one_work+0x1ec/0x414 worker_thread+0x70/0x46c kthread+0xdc/0xe0 ret_from_fork+0x10/0x20 Code: a9bb7bfd 910003fd a90153f3 f9411c40 (f9402814) This happens because STA has time to disconnect and reconnect before batadv_v_elp_throughput_metric_update() delayed work gets scheduled. In this situation, ath10k_sta_state() can be in the middle of resetting arsta data when the work queue get chance to be scheduled and ends up accessing it. Locking wiphy prevents that. Fixes: 7406353d ("cfg80211: implement cfg80211_get_station cfg80211 API") Signed-off-by:
Remi Pommarel <repk@triplefau.lt> Reviewed-by:
Nicolas Escande <nico.escande@gmail.com> Acked-by:
Antonio Quartulli <a@unstable.cc> Link: https://msgid.link/983b24a6a176e0800c01aedcd74480d9b551cb13.1716046653.git.repk@triplefau.ltSigned-off-by:
-
Johannes Berg authored
Previously I had moved the wiphy work to the unbound system workqueue, but missed that when it restarts and during resume it was still using the normal system workqueue. Fix that. Fixes: 91d20ab9 ("wifi: cfg80211: use system_unbound_wq for wiphy work") Reviewed-by:
-
Johannes Berg authored
Validate that the HE operation element has the correct length before parsing it. Cc: stable@vger.kernel.org Fixes: 645f3d85 ("wifi: cfg80211: handle UHB AP and STA power type") Reviewed-by:
-
Remi Pommarel authored
The ieee80211_sta_ps_deliver_wakeup() function takes sta->ps_lock to synchronizes with ieee80211_tx_h_unicast_ps_buf() which is called from softirq context. However using only spin_lock() to get sta->ps_lock in ieee80211_sta_ps_deliver_wakeup() does not prevent softirq to execute on this same CPU, to run ieee80211_tx_h_unicast_ps_buf() and try to take this same lock ending in deadlock. Below is an example of rcu stall that arises in such situation. rcu: INFO: rcu_sched self-detected stall on CPU rcu: 2-....: (42413413 ticks this GP) idle=b154/1/0x4000000000000000 softirq=1763/1765 fqs=21206996 rcu: (t=42586894 jiffies g=2057 q=362405 ncpus=4) CPU: 2 PID: 719 Comm: wpa_supplicant Tainted: G W 6.4.0-02158-g1b062f552873 #742 Hardware name: RPT (r1) (DT) pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : queued_spin_lock_slowpath+0x58/0x2d0 lr : invoke_tx_handlers_early+0x5b4/0x5c0 sp : ffff00001ef64660 x29: ffff00001ef64660 x28: ffff000009bc1070 x27: ffff000009bc0ad8 x26: ffff000009bc0900 x25: ffff00001ef647a8 x24: 0000000000000000 x23: ffff000009bc0900 x22: ffff000009bc0900 x21: ffff00000ac0e000 x20: ffff00000a279e00 x19: ffff00001ef646e8 x18: 0000000000000000 x17: ffff800016468000 x16: ffff00001ef608c0 x15: 0010533c93f64f80 x14: 0010395c9faa3946 x13: 0000000000000000 x12: 00000000fa83b2da x11: 000000012edeceea x10: ffff0000010fbe00 x9 : 0000000000895440 x8 : 000000000010533c x7 : ffff00000ad8b740 x6 : ffff00000c350880 x5 : 0000000000000007 x4 : 0000000000000001 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff00000ac0e0e8 Call trace: queued_spin_lock_slowpath+0x58/0x2d0 ieee80211_tx+0x80/0x12c ieee80211_tx_pending+0x110/0x278 tasklet_action_common.constprop.0+0x10c/0x144 tasklet_action+0x20/0x28 _stext+0x11c/0x284 ____do_softirq+0xc/0x14 call_on_irq_stack+0x24/0x34 do_softirq_own_stack+0x18/0x20 do_softirq+0x74/0x7c __local_bh_enable_ip+0xa0/0xa4 _ieee80211_wake_txqs+0x3b0/0x4b8 __ieee80211_wake_queue+0x12c/0x168 ieee80211_add_pending_skbs+0xec/0x138 ieee80211_sta_ps_deliver_wakeup+0x2a4/0x480 ieee80211_mps_sta_status_update.part.0+0xd8/0x11c ieee80211_mps_sta_status_update+0x18/0x24 sta_apply_parameters+0x3bc/0x4c0 ieee80211_change_station+0x1b8/0x2dc nl80211_set_station+0x444/0x49c genl_family_rcv_msg_doit.isra.0+0xa4/0xfc genl_rcv_msg+0x1b0/0x244 netlink_rcv_skb+0x38/0x10c genl_rcv+0x34/0x48 netlink_unicast+0x254/0x2bc netlink_sendmsg+0x190/0x3b4 ____sys_sendmsg+0x1e8/0x218 ___sys_sendmsg+0x68/0x8c __sys_sendmsg+0x44/0x84 __arm64_sys_sendmsg+0x20/0x28 do_el0_svc+0x6c/0xe8 el0_svc+0x14/0x48 el0t_64_sync_handler+0xb0/0xb4 el0t_64_sync+0x14c/0x150 Using spin_lock_bh()/spin_unlock_bh() instead prevents softirq to raise on the same CPU that is holding the lock. Fixes: 1d147bfa ("mac80211: fix AP powersave TX vs. wakeup race") Signed-off-by:
-
Nicolas Escande authored
With a ath9k device I can see that: iw phy phy0 interface add mesh0 type mp ip link set mesh0 up iw dev mesh0 scan Will start a scan with the Power Management bit set in the Frame Control Field. This is because we set this bit depending on the nonpeer_pm variable of the mesh iface sdata and when there are no active links on the interface it remains to NL80211_MESH_POWER_UNKNOWN. As soon as links starts to be established, it wil switch to NL80211_MESH_POWER_ACTIVE as it is the value set by befault on the per sta nonpeer_pm field. As we want no power save by default, (as expressed with the per sta ini values), lets init it to the expected default value of NL80211_MESH_POWER_ACTIVE. Also please note that we cannot change the default value from userspace prior to establishing a link as using NL80211_CMD_SET_MESH_CONFIG will not work before NL80211_CMD_JOIN_MESH has been issued. So too late for our initial scan. Signed-off-by:
-
Nicolas Escande authored
The hwmp code use objects of type mesh_preq_queue, added to a list in ieee80211_if_mesh, to keep track of mpath we need to resolve. If the mpath gets deleted, ex mesh interface is removed, the entries in that list will never get cleaned. Fix this by flushing all corresponding items of the preq_queue in mesh_path_flush_pending(). This should take care of KASAN reports like this: unreferenced object 0xffff00000668d800 (size 128): comm "kworker/u8:4", pid 67, jiffies 4295419552 (age 1836.444s) hex dump (first 32 bytes): 00 1f 05 09 00 00 ff ff 00 d5 68 06 00 00 ff ff ..........h..... 8e 97 ea eb 3e b8 01 00 00 00 00 00 00 00 00 00 ....>........... backtrace: [<000000007302a0b6>] __kmem_cache_alloc_node+0x1e0/0x35c [<00000000049bd418>] kmalloc_trace+0x34/0x80 [<0000000000d792bb>] mesh_queue_preq+0x44/0x2a8 [<00000000c99c3696>] mesh_nexthop_resolve+0x198/0x19c [<00000000926bf598>] ieee80211_xmit+0x1d0/0x1f4 [<00000000fc8c2284>] __ieee80211_subif_start_xmit+0x30c/0x764 [<000000005926ee38>] ieee80211_subif_start_xmit+0x9c/0x7a4 [<000000004c86e916>] dev_hard_start_xmit+0x174/0x440 [<0000000023495647>] __dev_queue_xmit+0xe24/0x111c [<00000000cfe9ca78>] batadv_send_skb_packet+0x180/0x1e4 [<000000007bacc5d5>] batadv_v_elp_periodic_work+0x2f4/0x508 [<00000000adc3cd94>] process_one_work+0x4b8/0xa1c [<00000000b36425d1>] worker_thread+0x9c/0x634 [<0000000005852dd5>] kthread+0x1bc/0x1c4 [<000000005fccd770>] ret_from_fork+0x10/0x20 unreferenced object 0xffff000009051f00 (size 128): comm "kworker/u8:4", pid 67, jiffies 4295419553 (age 1836.440s) hex dump (first 32 bytes): 90 d6 92 0d 00 00 ff ff 00 d8 68 06 00 00 ff ff ..........h..... 36 27 92 e4 02 e0 01 00 00 58 79 06 00 00 ff ff 6'.......Xy..... backtrace: [<000000007302a0b6>] __kmem_cache_alloc_node+0x1e0/0x35c [<00000000049bd418>] kmalloc_trace+0x34/0x80 [<0000000000d792bb>] mesh_queue_preq+0x44/0x2a8 [<00000000c99c3696>] mesh_nexthop_resolve+0x198/0x19c [<00000000926bf598>] ieee80211_xmit+0x1d0/0x1f4 [<00000000fc8c2284>] __ieee80211_subif_start_xmit+0x30c/0x764 [<000000005926ee38>] ieee80211_subif_start_xmit+0x9c/0x7a4 [<000000004c86e916>] dev_hard_start_xmit+0x174/0x440 [<0000000023495647>] __dev_queue_xmit+0xe24/0x111c [<00000000cfe9ca78>] batadv_send_skb_packet+0x180/0x1e4 [<000000007bacc5d5>] batadv_v_elp_periodic_work+0x2f4/0x508 [<00000000adc3cd94>] process_one_work+0x4b8/0xa1c [<00000000b36425d1>] worker_thread+0x9c/0x634 [<0000000005852dd5>] kthread+0x1bc/0x1c4 [<000000005fccd770>] ret_from_fork+0x10/0x20 Fixes: 050ac52c ("mac80211: code for on-demand Hybrid Wireless Mesh Protocol") Signed-off-by:
-
- 26 May, 2024 5 commits
-
-
Linus Torvalds authored
-
Kent Overstreet authored
percpu.h depends on smp.h, but doesn't include it directly because of circular header dependency issues; percpu.h is needed in a bunch of low level headers. This fixes a randconfig build error on mips: include/linux/alloc_tag.h: In function '__alloc_tag_ref_set': include/asm-generic/percpu.h:31:40: error: implicit declaration of function 'raw_smp_processor_id' [-Werror=implicit-function-declaration] Reported-by:
kernel test robot <lkp@intel.com> Fixes: 24e44cc2 ("mm: percpu: enable per-cpu allocation tagging") Closes: https://lore.kernel.org/oe-kbuild-all/202405210052.DIrMXJNz-lkp@intel.com/Signed-off-by:
Kent Overstreet <kent.overstreet@linux.dev> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v6.10-1-2024-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tool fix from Arnaldo Carvalho de Melo: "Revert a patch causing a regression. This made a simple 'perf record -e cycles:pp make -j199' stop working on the Ampere ARM64 system Linus uses to test ARM64 kernels". * tag 'perf-tools-fixes-for-v6.10-1-2024-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: Revert "perf parse-events: Prefer sysfs/JSON hardware events over legacy"
-
Arnaldo Carvalho de Melo authored
This reverts commit 617824a7. This made a simple 'perf record -e cycles:pp make -j199' stop working on the Ampere ARM64 system Linus uses to test ARM64 kernels, as discussed at length in the threads in the Link tags below. The fix provided by Ian wasn't acceptable and work to fix this will take time we don't have at this point, so lets revert this and work on it on the next devel cycle. Reported-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull smb client fixes from Steve French: - two important netfs integration fixes - including for a data corruption and also fixes for multiple xfstests - reenable swap support over SMB3 * tag '6.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: Fix missing set of remote_i_size cifs: Fix smb3_insert_range() to move the zero_point cifs: update internal version number smb3: reenable swapfiles over SMB3 mounts
-
- 25 May, 2024 4 commits
-
-
Linus Torvalds authored
Merge tag 'mm-hotfixes-stable-2024-05-25-09-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "16 hotfixes, 11 of which are cc:stable. A few nilfs2 fixes, the remainder are for MM: a couple of selftests fixes, various singletons fixing various issues in various parts" * tag 'mm-hotfixes-stable-2024-05-25-09-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm/ksm: fix possible UAF of stable_node mm/memory-failure: fix handling of dissolved but not taken off from buddy pages mm: /proc/pid/smaps_rollup: avoid skipping vma after getting mmap_lock again nilfs2: fix potential hang in nilfs_detach_log_writer() nilfs2: fix unexpected freezing of nilfs_segctor_sync() nilfs2: fix use-after-free of timer for log writer thread selftests/mm: fix build warnings on ppc64 arm64: patching: fix handling of execmem addresses selftests/mm: compaction_test: fix bogus test success and reduce probability of OOM-killer invocation selftests/mm: compaction_test: fix incorrect write of zero to nr_hugepages selftests/mm: compaction_test: fix bogus test success on Aarch64 mailmap: update email address for Satya Priya mm/huge_memory: don't unpoison huge_zero_folio kasan, fortify: properly rename memintrinsics lib: add version into /proc/allocinfo output mm/vmalloc: fix vmalloc which may return null if called with __GFP_NOFAIL
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Ingo Molnar: - Fix x86 IRQ vector leak caused by a CPU offlining race - Fix build failure in the riscv-imsic irqchip driver caused by an API-change semantic conflict - Fix use-after-free in irq_find_at_or_after() * tag 'irq-urgent-2024-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/irqdesc: Prevent use-after-free in irq_find_at_or_after() genirq/cpuhotplug, x86/vector: Prevent vector leak during CPU offline irqchip/riscv-imsic: Fixup riscv_ipi_set_virq_range() conflict
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: - Fix regressions of the new x86 CPU VFM (vendor/family/model) enumeration/matching code - Fix crash kernel detection on buggy firmware with non-compliant ACPI MADT tables - Address Kconfig warning * tag 'x86-urgent-2024-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Fix x86_match_cpu() to match just X86_VENDOR_INTEL crypto: x86/aes-xts - switch to new Intel CPU model defines x86/topology: Handle bogus ACPI tables correctly x86/kconfig: Select ARCH_WANT_FRAME_POINTERS again when UNWINDER_FRAME_POINTER=y
-
https://github.com/cminyard/linux-ipmiLinus Torvalds authored
Pull ipmi updates from Corey Minyard: "Mostly updates for deprecated interfaces, platform.remove and converting from a tasklet to a BH workqueue. Also use HAS_IOPORT for disabling inb()/outb()" * tag 'for-linus-6.10-1' of https://github.com/cminyard/linux-ipmi: ipmi: kcs_bmc_npcm7xx: Convert to platform remove callback returning void ipmi: kcs_bmc_aspeed: Convert to platform remove callback returning void ipmi: ipmi_ssif: Convert to platform remove callback returning void ipmi: ipmi_si_platform: Convert to platform remove callback returning void ipmi: ipmi_powernv: Convert to platform remove callback returning void ipmi: bt-bmc: Convert to platform remove callback returning void char: ipmi: handle HAS_IOPORT dependencies ipmi: Convert from tasklet to BH workqueue
-
