- 07 Jun, 2016 1 commit
-
-
Lokesh Vutla authored
Algorithms can be registered only once. So skip registration of algorithms if already registered (i.e. in case we have two AES cores in the system.) Signed-off-by:
Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by:
Tero Kristo <t-kristo@ti.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
- 02 Jun, 2016 2 commits
-
-
Megha Dey authored
Currently there are several checkpatch warnings in the sha1_mb.c file: 'WARNING: line over 80 characters' in the sha1_mb.c file. Also, the syntax of some multi-line comments are not correct. This patch fixes these issues. Signed-off-by:
Megha Dey <megha.dey@linux.intel.com> Signed-off-by:
-
Stephan Mueller authored
The CTR DRBG code always set the key for each sym cipher invocation even though the key has not been changed. The patch ensures that the setkey is only invoked when a new key is generated by the DRBG. With this patch, the CTR DRBG performance increases by more than 150%. Signed-off-by:
Stephan Mueller <smueller@chronox.de> Signed-off-by:
-
- 31 May, 2016 28 commits
-
-
Krzysztof Kozlowski authored
Bring some consistency by: 1. Replacing fixed-space indentation of structure members with just tabs. 2. Remove indentation in declaration of local variable between type and name. Driver was mixing usage of such indentation and lack of it. When removing indentation, reorder variables in reversed-christmas-tree order with first variables being initialized ones. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by:
Vladimir Zapolskiy <vz@mleia.com> Signed-off-by:
-
Yendapally Reddy Dhananjaya Reddy authored
Read the requested number of data from the fifo Signed-off-by:
Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com> Reviewed-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
-
Yendapally Reddy Dhananjaya Reddy authored
Add support for the random number generator to the Northstar Plus SoC device tree. Signed-off-by:
-
Yendapally Reddy Dhananjaya Reddy authored
This supports the random number generator available in NSP SoC. Masks the rng interrupt for NSP. Signed-off-by:
-
Yendapally Reddy Dhananjaya Reddy authored
Document the bindings used by Northstar Plus(NSP) SoC random number generator. Signed-off-by:
-
Nicolai Stange authored
mpi_read_from_buffer() and mpi_read_raw_data() do basically the same thing except that the former extracts the number of payload bits from the first two bytes of the input buffer. Besides that, the data copying logic is exactly the same. Replace the open coded buffer to MPI instance conversion by a call to mpi_read_raw_data(). Signed-off-by:
Nicolai Stange <nicstange@gmail.com> Signed-off-by:
-
Nicolai Stange authored
The first two bytes of the input buffer encode its expected length and mpi_read_from_buffer() prints a console message if the given buffer is too short. However, there are some oddities with how this message is printed: - It is printed at the default loglevel. This is different from the one used in the case that the first two bytes' value is unsupportedly large, i.e. KERN_INFO. - The format specifier '%d' is used for unsigned ints. - It prints the values of nread and *ret_nread. This is redundant since the former is always the latter + 1. Clean this up as follows: - Use pr_info() rather than printk() with no loglevel. - Use the format specifiers '%u' in place if '%d'. - Do not print the redundant 'nread' but the more helpful 'nbytes' value. Signed-off-by:
-
Nicolai Stange authored
Currently, if the input buffer is shorter than the expected length as indicated by its first two bytes, an MPI instance of this expected length will be allocated and filled with as much data as is available. The rest will remain uninitialized. Instead of leaving this condition undetected, an error code should be reported to the caller. Since this situation indicates that the input buffer's first two bytes, encoding the number of expected bits, are garbled, -EINVAL is appropriate here. If the input buffer is shorter than indicated by its first two bytes, make mpi_read_from_buffer() return -EINVAL. Get rid of the 'nread' variable: with the new semantics, the total number of bytes read from the input buffer is known in advance. Signed-off-by:
-
Nicolai Stange authored
Currently, if digsig_verify_rsa() detects that the modulo's length is zero, i.e. mlen == 0, it returns -ENOMEM which doesn't really fit here. Make digsig_verify_rsa() return -EINVAL upon mlen == 0. Signed-off-by:
-
Nicolai Stange authored
mpi_read_from_buffer() reads a MPI from a buffer into a newly allocated MPI instance. It expects the buffer's leading two bytes to contain the number of bits, followed by the actual payload. On failure, it returns NULL and updates the in/out argument ret_nread somewhat inconsistently: - If the given buffer is too short to contain the leading two bytes encoding the number of bits or their value is unsupported, then ret_nread will be cleared. - If the allocation of the resulting MPI instance fails, ret_nread is left as is. The only user of mpi_read_from_buffer(), digsig_verify_rsa(), simply checks for a return value of NULL and returns -ENOMEM if that happens. While this is all of cosmetic nature only, there is another error condition which currently isn't detectable by the caller of mpi_read_from_buffer(): if the given buffer is too small to hold the number of bits as encoded in its first two bytes, the return value will be non-NULL and *ret_nread > 0. In preparation of communicating this condition to the caller, let mpi_read_from_buffer() return error values by means of the ERR_PTR() mechanism. Make the sole caller of mpi_read_from_buffer(), digsig_verify_rsa(), check the return value for IS_ERR() rather than == NULL. If IS_ERR() is true, return the associated error value rather than the fixed -ENOMEM. Signed-off-by:
-
Nicolai Stange authored
The number of bits, nbits, is calculated in mpi_read_raw_data() as follows: nbits = nbytes * 8; Afterwards, the number of leading zero bits of the first byte get subtracted: nbits -= count_leading_zeros(buffer[0]); However, count_leading_zeros() takes an unsigned long and thus, the u8 gets promoted to an unsigned long. Thus, the above doesn't subtract the number of leading zeros in the most significant nonzero input byte from nbits, but the number of leading zeros of the most significant nonzero input byte promoted to unsigned long, i.e. BITS_PER_LONG - 8 too many. Fix this by subtracting count_leading_zeros(...) - (BITS_PER_LONG - 8) from nbits only. Fixes: e1045992 ("MPILIB: Provide a function to read raw data into an MPI") Signed-off-by:
-
Nicolai Stange authored
In mpi_read_raw_data(), unsigned nbits is calculated as follows: nbits = nbytes * 8; and redundantly cleared later on if nbytes == 0: if (nbytes > 0) ... else nbits = 0; Purge this redundant clearing for the sake of clarity. Signed-off-by: -
Nicolai Stange authored
mpi_set_buffer() has no in-tree users and similar functionality is provided by mpi_read_raw_data(). Remove mpi_set_buffer(). Signed-off-by:
-
Maxime Coquelin authored
This patch fixes the following warning: drivers/char/hw_random/stm32-rng.c: In function 'stm32_rng_read': drivers/char/hw_random/stm32-rng.c:82:19: warning: 'sr' may be used uninitialized in this function Reported-by:Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Suggested-by:
Arnd Bergmann <arnd@arndb.de> Cc: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by:
Maxime Coquelin <mcoquelin.stm32@gmail.com> Reviewed-by:
Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by:
-
Geert Uytterhoeven authored
Submitters of device tree binding documentation may forget to CC the subsystem maintainer if this is missing. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: Matt Mackall <mpm@selenic.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: linux-crypto@vger.kernel.org Signed-off-by:
-
Geert Uytterhoeven authored
Submitters of device tree binding documentation may forget to CC the subsystem maintainer if this is missing. Signed-off-by:
-
Andrea Gelmini authored
Signed-off-by:
Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by:
-
Andrea Gelmini authored
Signed-off-by:
-
Horia Geantă authored
This basically adds support for ls1043a platform. Signed-off-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
-
Horia Geantă authored
There are SoCs like LS1043A where CAAM endianness (BE) does not match the default endianness of the core (LE). Moreover, there are requirements for the driver to handle cases like CPU_BIG_ENDIAN=y on ARM-based SoCs. This requires for a complete rewrite of the I/O accessors. PPC-specific accessors - {in,out}_{le,be}XX - are replaced with generic ones - io{read,write}[be]XX. Endianness is detected dynamically (at runtime) to allow for multiplatform kernels, for e.g. running the same kernel image on LS1043A (BE CAAM) and LS2080A (LE CAAM) armv8-based SoCs. While here: debugfs entries need to take into consideration the endianness of the core when displaying data. Add the necessary glue code so the entries remain the same, but they are properly read, regardless of the core and/or SEC endianness. Note: pdb.h fixes only what is currently being used (IPsec). Reviewed-by:Tudor Ambarus <tudor-dan.ambarus@nxp.com> Signed-off-by:
Alex Porosanu <alexandru.porosanu@nxp.com> Signed-off-by:
-
Cristian Stoica authored
The offset field is 13 bits wide; make sure we don't overwrite more than that in the caam hardware scatter gather structure. Signed-off-by:
Cristian Stoica <cristian.stoica@freescale.com> Signed-off-by:
-
Horia Geantă authored
This will allow device drivers to consistently use io{read,write}XX also for 64-bit accesses. Acked-by:Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Horia Geantă authored
This will allow device drivers to consistently use io{read,write}XXbe also for 64-bit accesses. Acked-by:Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Horia Geantă authored
This will allow device drivers to consistently use io{read,write}XX also for 64-bit accesses. Acked-by: -
Horia Geantă authored
While reviewing the addition of io{read,write}64be accessors, Arnd -finds a potential problem: "If an architecture overrides readq/writeq to have barriers but does not override ioread64be/iowrite64be, this will lack the barriers and behave differently from the little-endian version. I think the only affected architecture is ARC, since ARM and ARM64 both override the big-endian accessors to have the correct barriers, and all others don't use barriers at all." -suggests a fix for the same problem in existing code (16/32-bit accessors); the fix leads "to a double-swap on architectures that don't override the io{read,write}{16,32}be accessors, but it will work correctly on all architectures without them having to override these accessors." Suggested-by: -
Tadeusz Struk authored
The sizeof(*ctx->dec_cd) and sizeof(*ctx->enc_cd) are equal, but we should use the correct one for freeing memory anyway. Signed-off-by:
Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by:
-
Stephan Mueller authored
The CRYPTO_MSG_GETALG netlink message type provides a buffer to the kernel to retrieve information from the kernel. The data buffer will not provide any input and will not be read. Hence the nlmsg_parse is not applicable to this netlink message type. This patch fixes the following kernel log message when using this netlink interface: netlink: 208 bytes leftover after parsing attributes in process `XXX'. Patch successfully tested with libkcapi from [1] which uses CRYPTO_MSG_GETALG to obtain cipher-specific information from the kernel. [1] http://www.chronox.de/libkcapi.htmlSigned-off-by:
-
Stephan Mueller authored
Add the MODULE_ALIAS for the cra_driver_name of the different ciphers to allow an automated loading if a driver name is used. Signed-off-by:
-
- 30 May, 2016 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: "This fixes the following issues: - missing selection in public_key that may result in a build failure - Potential crash in error path in omap-sham - ccp AES XTS bug that affects requests larger than 4096" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: ccp - Fix AES XTS error for request sizes above 4096 crypto: public_key: select CRYPTO_AKCIPHER crypto: omap-sham - potential Oops on error in probe
-
- 29 May, 2016 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is a set of four fixes noticed in the merge window. The aacraid one is an optimisation, the mp3sas one fixes a spurious printk, the sd_check_events one fixes a theoretical race and the failed zero length commands fixes a bug in our completion/retry routines that has been causing problems in the field" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: aacraid: do not activate events on non-SRC adapters mpt3sas: add missing curly braces sd: get disk reference in sd_check_events() scsi_lib: correctly retry failed zero length REQ_TYPE_FS commands
-
Linus Torvalds authored
-
George Spelvin authored
The self-test was updated to cover zero-length strings; the function needs to be updated, too. Reported-by:
George Spelvin <linux@sciencehorizons.net> Fixes: fcfd2fbf ("fs/namei.c: Add hashlen_string() function") Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
George Spelvin authored
The original name was simply hash_string(), but that conflicted with a function with that name in drivers/base/power/trace.c, and I decided that calling it "hashlen_" was better anyway. But you have to do it in two places. [ This caused build errors for architectures that don't define CONFIG_DCACHE_WORD_ACCESS - Linus ] Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Fixes: fcfd2fbf ("fs/namei.c: Add hashlen_string() function") Signed-off-by:
-
- 28 May, 2016 4 commits
-
-
Mikulas Patocka authored
The HPFS filesystem used generic_show_options to produce string that is displayed in /proc/mounts. However, there is a problem that the options may disappear after remount. If we mount the filesystem with option1 and then remount it with option2, /proc/mounts should show both option1 and option2, however it only shows option2 because the whole option string is replaced with replace_mount_options in hpfs_remount_fs. To fix this bug, implement the hpfs_show_options function that prints options that are currently selected. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Mikulas Patocka authored
Commit c8f33d0b ("affs: kstrdup() memory handling") checks if the kstrdup function returns NULL due to out-of-memory condition. However, if we are remounting a filesystem with no change to filesystem-specific options, the parameter data is NULL. In this case, kstrdup returns NULL (because it was passed NULL parameter), although no out of memory condition exists. The mount syscall then fails with ENOMEM. This patch fixes the bug. We fail with ENOMEM only if data is non-NULL. The patch also changes the call to replace_mount_options - if we didn't pass any filesystem-specific options, we don't call replace_mount_options (thus we don't erase existing reported options). Fixes: c8f33d0b ("affs: kstrdup() memory handling") Signed-off-by:
-
Mikulas Patocka authored
Commit ce657611 ("hpfs: kstrdup() out of memory handling") checks if the kstrdup function returns NULL due to out-of-memory condition. However, if we are remounting a filesystem with no change to filesystem-specific options, the parameter data is NULL. In this case, kstrdup returns NULL (because it was passed NULL parameter), although no out of memory condition exists. The mount syscall then fails with ENOMEM. This patch fixes the bug. We fail with ENOMEM only if data is non-NULL. The patch also changes the call to replace_mount_options - if we didn't pass any filesystem-specific options, we don't call replace_mount_options (thus we don't erase existing reported options). Fixes: ce657611 ("hpfs: kstrdup() out of memory handling") Signed-off-by:
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull more MIPS updates from Ralf Baechle: "This is the secondnd batch of MIPS patches for 4.7. Summary: CPS: - Copy EVA configuration when starting secondary VPs. EIC: - Clear Status IPL. Lasat: - Fix a few off by one bugs. lib: - Mark intrinsics notrace. Not only are the intrinsics uninteresting, it would cause infinite recursion. MAINTAINERS: - Add file patterns for MIPS BRCM device tree bindings. - Add file patterns for mips device tree bindings. MT7628: - Fix MT7628 pinmux typos. - wled_an pinmux gpio. - EPHY LEDs pinmux support. Pistachio: - Enable KASLR VDSO: - Build microMIPS VDSO for microMIPS kernels. - Fix aliasing warning by building with `-fno-strict-aliasing' for debugging but also tracing them might result in recursion. Misc: - Add missing FROZEN hotplug notifier transitions. - Fix clk binding example for varioius PIC32 devices. - Fix cpu interrupt controller node-names in the DT files. - Fix XPA CPU feature separation. - Fix write_gc0_* macros when writing zero. - Add inline asm encoding helpers. - Add missing VZ accessor microMIPS encodings. - Fix little endian microMIPS MSA encodings. - Add 64-bit HTW fields and fix its configuration. - Fix sigreturn via VDSO on microMIPS kernel. - Lots of typo fixes. - Add definitions of SegCtl registers and use them" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (49 commits) MIPS: Add missing FROZEN hotplug notifier transitions MIPS: Build microMIPS VDSO for microMIPS kernels MIPS: Fix sigreturn via VDSO on microMIPS kernel MIPS: devicetree: fix cpu interrupt controller node-names MIPS: VDSO: Build with `-fno-strict-aliasing' MIPS: Pistachio: Enable KASLR MIPS: lib: Mark intrinsics notrace MIPS: Fix 64-bit HTW configuration MIPS: Add 64-bit HTW fields MAINTAINERS: Add file patterns for mips device tree bindings MAINTAINERS: Add file patterns for mips brcm device tree bindings MIPS: Simplify DSP instruction encoding macros MIPS: Add missing tlbinvf/XPA microMIPS encodings MIPS: Fix little endian microMIPS MSA encodings MIPS: Add missing VZ accessor microMIPS encodings MIPS: Add inline asm encoding helpers MIPS: Spelling fix lets -> let's MIPS: VR41xx: Fix typo MIPS: oprofile: Fix typo MIPS: math-emu: Fix typo ...
-
