- 28 Mar, 2013 14 commits
-
-
Daniel Pieczko authored
[ Upstream commit c2f3b8e3 ] The assertion of netif_device_present() at the top of efx_hard_start_xmit() may fail if we don't do this. Signed-off-by:
Ben Hutchings <bhutchings@solarflare.com> [bwh: Backported to 3.0: adjust context] Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ben Hutchings authored
[ Upstream commits a606f432, d5e8cc6c, 525d9e82 ] The TX DMA engine issues upstream read requests when there is room in the TX FIFO for the completion. However, the fetches for the rest of the packet might be delayed by any back pressure. Since a flush must wait for an EOP, the entire flush may be delayed by back pressure. Mitigate this by disabling flow control before the flushes are started. Since PF and VF flushes run in parallel introduce fc_disable, a reference count of the number of flushes outstanding. The same principle could be applied to Falcon, but that would bring with it its own testing. We sometimes hit a "failed to flush" timeout on some TX queues, but the flushes have completed and the flush completion events seem to go missing. In this case, we can check the TX_DESC_PTR_TBL register and drain the queues if the flushes had finished. Signed-off-by:
-
Ben Hutchings authored
[ Upstream commit bfeed902 ] On big-endian systems the MTD partition names currently have mangled subtype numbers and are not recognised by the firmware update tool (sfupdate). Signed-off-by:
-
Stuart Hodgson authored
[ Upstream commit 3dca9d2d ] efx_nic_fatal_interrupt() disables DMA before scheduling a reset. After this, we need not and *cannot* flush queues. Signed-off-by:
-
Steve Hodgson authored
[ Upstream commit a659b2a9 ] [bwh: Use __force in the one place it's needed] Signed-off-by:
-
Ben Hutchings authored
[ Upstream commit 4017dbdc ] efx_filter_remove_filter() fails to remove inserted filters in some cases. For example: 1. Two filters A and B have specifications that result in an initial hash collision. 2. A is inserted first, followed by B. 3. An attempt to remove B first succeeds, but if A is removed first a subsequent attempt to remove B fails. When searching for an existing filter (!for_insert), efx_filter_search() must always continue to the maximum search depth for the given type rather than stopping at the first unused entry. Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit 5a3da1fe ] This patch introduces a constant limit of the fragment queue hash table bucket list lengths. Currently the limit 128 is choosen somewhat arbitrary and just ensures that we can fill up the fragment cache with empty packets up to the default ip_frag_high_thresh limits. It should just protect from list iteration eating considerable amounts of cpu. If we reach the maximum length in one hash bucket a warning is printed. This is implemented on the caller side of inet_frag_find to distinguish between the different users of inet_fragment.c. I dropped the out of memory warning in the ipv4 fragment lookup path, because we already get a warning by the slab allocator. Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Jesper Dangaard Brouer <jbrouer@redhat.com> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Vlad Yasevich authored
[ Upstream commit a5b8db91 ] Range/validity checks on rta_type in rtnetlink_rcv_msg() do not account for flags that may be set. This causes the function to return -EINVAL when flags are set on the type (for example NLA_F_NESTED). Signed-off-by:
Vlad Yasevich <vyasevic@redhat.com> Acked-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
-
Denis V. Lunev authored
[ Upstream commit 5b9e12db ] a long time ago by the commit commit 93456b6d Author: Denis V. Lunev <den@openvz.org> Date: Thu Jan 10 03:23:38 2008 -0800 [IPV4]: Unify access to the routing tables. the defenition of FIB_HASH_TABLE size has obtained wrong dependency: it should depend upon CONFIG_IP_MULTIPLE_TABLES (as was in the original code) but it was depended from CONFIG_IP_ROUTE_MULTIPATH This patch returns the situation to the original state. The problem was spotted by Tingwei Liu. Signed-off-by:
Denis V. Lunev <den@openvz.org> CC: Tingwei Liu <tingw.liu@gmail.com> CC: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by:
-
Xufeng Zhang authored
[ Upstream commit 2317f449 ] sctp_assoc_lookup_tsn() function searchs which transport a certain TSN was sent on, if not found in the active_path transport, then go search all the other transports in the peer's transport_addr_list, however, we should continue to the next entry rather than break the loop when meet the active_path transport. Signed-off-by:
Xufeng Zhang <xufeng.zhang@windriver.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Acked-by:
Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
-
Veaceslav Falico authored
[ Upstream commit 3f315bef ] __netpoll_cleanup() is called in netconsole_netdev_event() while holding a spinlock. Release/acquire the spinlock before/after it and restart the loop. Also, disable the netconsole completely, because we won't have chance after the restart of the loop, and might end up in a situation where nt->enabled == 1 and nt->np.dev == NULL. Signed-off-by:
Veaceslav Falico <vfalico@redhat.com> Acked-by:
-
David Ward authored
[ Upstream commit 4660c7f4 ] This is needed in order to detect if the timestamp option appears more than once in a packet, to remove the option if the packet is fragmented, etc. My previous change neglected to store the option location when the router addresses were prespecified and Pointer > Length. But now the option location is also stored when Flag is an unrecognized value, to ensure these option handling behaviors are still performed. Signed-off-by:
David Ward <david.ward@ll.mit.edu> Signed-off-by:
-
Tkhai Kirill authored
[ Upstream commit cb29529e ] If a machine has X (X < 4) sunsu ports and cmdline option "console=ttySY" is passed, where X < Y <= 4, than the following panic happens: Unable to handle kernel NULL pointer dereference TPC: <sunsu_console_setup+0x78/0xe0> RPC: <sunsu_console_setup+0x74/0xe0> I7: <register_console+0x378/0x3e0> Call Trace: [0000000000453a38] register_console+0x378/0x3e0 [0000000000576fa0] uart_add_one_port+0x2e0/0x340 [000000000057af40] su_probe+0x160/0x2e0 [00000000005b8a4c] platform_drv_probe+0xc/0x20 [00000000005b6c2c] driver_probe_device+0x12c/0x220 [00000000005b6da8] __driver_attach+0x88/0xa0 [00000000005b4df4] bus_for_each_dev+0x54/0xa0 [00000000005b5a54] bus_add_driver+0x154/0x260 [00000000005b7190] driver_register+0x50/0x180 [00000000006d250c] sunsu_init+0x18c/0x1e0 [00000000006c2668] do_one_initcall+0xe8/0x160 [00000000006c282c] kernel_init_freeable+0x12c/0x1e0 [0000000000603764] kernel_init+0x4/0x100 [0000000000405f64] ret_from_syscall+0x1c/0x2c [0000000000000000] (null) 1)Fix the panic; 2)Increment registered port number every successful probe. Signed-off-by:
Kirill Tkhai <tkhai@yandex.ru> CC: David Miller <davem@davemloft.net> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 0319f990, which is commit feca7746 upstream. It shouldn't have gone into this stable release. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Joseph Salisbury <joseph.salisbury@canonical.com> Cc: Stephen Thirlwall <sdt@dr.com> Signed-off-by:
-
- 20 Mar, 2013 26 commits
-
-
Greg Kroah-Hartman authored
-
Mathias Krause authored
[ Upstream commit 29cd8ae0 ] The dcb netlink interface leaks stack memory in various places: * perm_addr[] buffer is only filled at max with 12 of the 32 bytes but copied completely, * no in-kernel driver fills all fields of an IEEE 802.1Qaz subcommand, so we're leaking up to 58 bytes for ieee_ets structs, up to 136 bytes for ieee_pfc structs, etc., * the same is true for CEE -- no in-kernel driver fills the whole struct, Prevent all of the above stack info leaks by properly initializing the buffers/structures involved. Signed-off-by:
Mathias Krause <minipli@googlemail.com> Signed-off-by:
-
Mathias Krause authored
[ Upstream commit 84d73cd3 ] Initialize the mac address buffer with 0 as the driver specific function will probably not fill the whole buffer. In fact, all in-kernel drivers fill only ETH_ALEN of the MAX_ADDR_LEN bytes, i.e. 6 of the 32 possible bytes. Therefore we currently leak 26 bytes of stack memory to userland via the netlink interface. Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit ddf64354 ] v2: a) used struct ipv6_addr_props v3: a) reverted changes for ipv6_addr_props v4: a) do not use __ipv6_addr_needs_scope_id Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
-
Cristian Bercaru authored
[ Upstream commit 3bc1b1ad ] The frames for which rx_handlers return RX_HANDLER_CONSUMED are no longer counted as dropped. They are counted as successfully received by 'netif_receive_skb'. This allows network interface drivers to correctly update their RX-OK and RX-DRP counters based on the result of 'netif_receive_skb'. Signed-off-by:
Cristian Bercaru <B43982@freescale.com> Signed-off-by:
-
Paul Moore authored
[ Upstream commits 0c1233ab and a6a8fe95 ] When we have a large number of static label mappings that spill across the netlink message boundary we fail to properly save our state in the netlink_callback struct which causes us to repeat the same listings. This patch fixes this problem by saving the state correctly between calls to the NetLabel static label netlink "dumpit" routines. Signed-off-by:
Paul Moore <pmoore@redhat.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit f8af75f3 ] Dave reported following crash : general protection fault: 0000 [#1] SMP CPU 2 Pid: 25407, comm: qemu-kvm Not tainted 3.7.9-205.fc18.x86_64 #1 Hewlett-Packard HP Z400 Workstation/0B4Ch RIP: 0010:[<ffffffffa0399bd5>] [<ffffffffa0399bd5>] destroy_conntrack+0x35/0x120 [nf_conntrack] RSP: 0018:ffff880276913d78 EFLAGS: 00010206 RAX: 50626b6b7876376c RBX: ffff88026e530d68 RCX: ffff88028d158e00 RDX: ffff88026d0d5470 RSI: 0000000000000011 RDI: 0000000000000002 RBP: ffff880276913d88 R08: 0000000000000000 R09: ffff880295002900 R10: 0000000000000000 R11: 0000000000000003 R12: ffffffff81ca3b40 R13: ffffffff8151a8e0 R14: ffff880270875000 R15: 0000000000000002 FS: 00007ff3bce38a00(0000) GS:ffff88029fc40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007fd1430bd000 CR3: 000000027042b000 CR4: 00000000000027e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process qemu-kvm (pid: 25407, threadinfo ffff880276912000, task ffff88028c369720) Stack: ffff880156f59100 ffff880156f59100 ffff880276913d98 ffffffff815534f7 ffff880276913db8 ffffffff8151a74b ffff880270875000 ffff880156f59100 ffff880276913dd8 ffffffff8151a5a6 ffff880276913dd8 ffff88026d0d5470 Call Trace: [<ffffffff815534f7>] nf_conntrack_destroy+0x17/0x20 [<ffffffff8151a74b>] skb_release_head_state+0x7b/0x100 [<ffffffff8151a5a6>] __kfree_skb+0x16/0xa0 [<ffffffff8151a666>] kfree_skb+0x36/0xa0 [<ffffffff8151a8e0>] skb_queue_purge+0x20/0x40 [<ffffffffa02205f7>] __tun_detach+0x117/0x140 [tun] [<ffffffffa022184c>] tun_chr_close+0x3c/0xd0 [tun] [<ffffffff8119669c>] __fput+0xec/0x240 [<ffffffff811967fe>] ____fput+0xe/0x10 [<ffffffff8107eb27>] task_work_run+0xa7/0xe0 [<ffffffff810149e1>] do_notify_resume+0x71/0xb0 [<ffffffff81640152>] int_signal+0x12/0x17 Code: 00 00 04 48 89 e5 41 54 53 48 89 fb 4c 8b a7 e8 00 00 00 0f 85 de 00 00 00 0f b6 73 3e 0f b7 7b 2a e8 10 40 00 00 48 85 c0 74 0e <48> 8b 40 28 48 85 c0 74 05 48 89 df ff d0 48 c7 c7 08 6a 3a a0 RIP [<ffffffffa0399bd5>] destroy_conntrack+0x35/0x120 [nf_conntrack] RSP <ffff880276913d78> This is because tun_net_xmit() needs to call nf_reset() before queuing skb into receive_queue Reported-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
Neal Cardwell authored
[ Upstream commit aab2b4bf ] We should not update ts_recent and call tcp_rcv_rtt_measure_ts() both before and after going to step5. That wastes CPU and double-counts the receiver-side RTT sample. Signed-off-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
-
Lorenzo Colitti authored
[ Upstream commit 3e8b0ac3 ] Setting net.ipv6.conf.<interface>.accept_ra=2 causes the kernel to accept RAs even when forwarding is enabled. However, enabling forwarding purges all default routes on the system, breaking connectivity until the next RA is received. Fix this by not purging default routes on interfaces that have accept_ra=2. Signed-off-by:
Lorenzo Colitti <lorenzo@google.com> Acked-by:
-
Cong Wang authored
[ Upstream commit ece6b0a2 ] Dave Jones reported the following bug: "When fed mangled socket data, rds will trust what userspace gives it, and tries to allocate enormous amounts of memory larger than what kmalloc can satisfy." WARNING: at mm/page_alloc.c:2393 __alloc_pages_nodemask+0xa0d/0xbe0() Hardware name: GA-MA78GM-S2H Modules linked in: vmw_vsock_vmci_transport vmw_vmci vsock fuse bnep dlci bridge 8021q garp stp mrp binfmt_misc l2tp_ppp l2tp_core rfcomm s Pid: 24652, comm: trinity-child2 Not tainted 3.8.0+ #65 Call Trace: [<ffffffff81044155>] warn_slowpath_common+0x75/0xa0 [<ffffffff8104419a>] warn_slowpath_null+0x1a/0x20 [<ffffffff811444ad>] __alloc_pages_nodemask+0xa0d/0xbe0 [<ffffffff8100a196>] ? native_sched_clock+0x26/0x90 [<ffffffff810b2128>] ? trace_hardirqs_off_caller+0x28/0xc0 [<ffffffff810b21cd>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff811861f8>] alloc_pages_current+0xb8/0x180 [<ffffffff8113eaaa>] __get_free_pages+0x2a/0x80 [<ffffffff811934fe>] kmalloc_order_trace+0x3e/0x1a0 [<ffffffff81193955>] __kmalloc+0x2f5/0x3a0 [<ffffffff8104df0c>] ? local_bh_enable_ip+0x7c/0xf0 [<ffffffffa0401ab3>] rds_message_alloc+0x23/0xb0 [rds] [<ffffffffa04043a1>] rds_sendmsg+0x2b1/0x990 [rds] [<ffffffff810b21cd>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff81564620>] sock_sendmsg+0xb0/0xe0 [<ffffffff810b2052>] ? get_lock_stats+0x22/0x70 [<ffffffff810b24be>] ? put_lock_stats.isra.23+0xe/0x40 [<ffffffff81567f30>] sys_sendto+0x130/0x180 [<ffffffff810b872d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff816c547b>] ? _raw_spin_unlock_irq+0x3b/0x60 [<ffffffff816cd767>] ? sysret_check+0x1b/0x56 [<ffffffff810b8695>] ? trace_hardirqs_on_caller+0x115/0x1a0 [<ffffffff81341d8e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff816cd742>] system_call_fastpath+0x16/0x1b ---[ end trace eed6ae990d018c8b ]--- Reported-by:
Cong Wang <amwang@redhat.com> Acked-by:
Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Signed-off-by:
-
Guillaume Nault authored
[ Upstream commit 8b82547e ] The sendmsg() syscall handler for PPPoL2TP doesn't decrease the socket reference counter after successful transmissions. Any successful sendmsg() call from userspace will then increase the reference counter forever, thus preventing the kernel's session and tunnel data from being freed later on. The problem only happens when writing directly on L2TP sockets. PPP sockets attached to L2TP are unaffected as the PPP subsystem uses pppol2tp_xmit() which symmetrically increase/decrease reference counters. This patch adds the missing call to sock_put() before returning from pppol2tp_sendmsg(). Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
Guo Chao authored
commit 5370019d upstream. bd_mutex and lo_ctl_mutex can be held in different order. Path #1: blkdev_open blkdev_get __blkdev_get (hold bd_mutex) lo_open (hold lo_ctl_mutex) Path #2: blkdev_ioctl lo_ioctl (hold lo_ctl_mutex) lo_set_capacity (hold bd_mutex) Lockdep does not report it, because path #2 actually holds a subclass of lo_ctl_mutex. This subclass seems creep into the code by mistake. The patch author actually just mentioned it in the changelog, see commit f028f3b2 ("loop: fix circular locking in loop_clr_fd()"), also see: http://marc.info/?l=linux-kernel&m=123806169129727&w=2 Path #2 hold bd_mutex to call bd_set_size(), I've protected it with i_mutex in a previous patch, so drop bd_mutex at this site. Signed-off-by:
Guo Chao <yan@linux.vnet.ibm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: M. Hindess <hindessm@uk.ibm.com> Cc: Nikanth Karthikesan <knikanth@suse.de> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Acked-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
-
Guo Chao authored
commit d646a02a upstream. blkdev_ioctl(GETBLKSIZE) uses i_size_read() to read size of block device. If we update block size directly, reader may see intermediate result in some machines and configurations. Use i_size_write() instead. Signed-off-by:
-
Ben Hutchings authored
Commit 3e78080f ('hwmon: (sht15) Check return value of regulator_enable()') depends on the use of devm_kmalloc() for automatic resource cleanup in the failure cases, which was introduced in 3.7. In older stable branches, explicit cleanup is needed. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Dmitry Rogozhkin authored
commit e79e0fe3 upstream. Subsequent threads returning EBUSY from vm_insert_pfn() was not handled correctly. As a result concurrent access from new threads to mmapped data caused SIGBUS. Note that this fixes i-g-t/tests/gem_threaded_tiled_access. Tested-by:
Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by:
Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Eric Sandeen authored
commit bc178622 upstream. Doing this would reliably fail with -EBUSY for me: # mount /dev/sdb2 /mnt/scratch; umount /mnt/scratch; mkfs.btrfs -f /dev/sdb2 ... unable to open /dev/sdb2: Device or resource busy because mkfs.btrfs tries to open the device O_EXCL, and somebody still has it. Using systemtap to track bdev gets & puts shows a kworker thread doing a blkdev put after mkfs attempts a get; this is left over from the unmount path: btrfs_close_devices __btrfs_close_devices call_rcu(&device->rcu, free_device); free_device INIT_WORK(&device->rcu_work, __free_device); schedule_work(&device->rcu_work); so unmount might complete before __free_device fires & does its blkdev_put. Adding an rcu_barrier() to btrfs_close_devices() causes unmount to wait until all blkdev_put()s are done, and the device is truly free once unmount completes. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
Josef Bacik <jbacik@fusionio.com> Signed-off-by:
Chris Mason <chris.mason@fusionio.com> Signed-off-by:
-
Heiko Carstens authored
commit f6a70a07 upstream. Our flush_tlb_kernel_range() implementation calls __tlb_flush_mm() with &init_mm as argument. __tlb_flush_mm() however will only flush tlbs for the passed in mm if its mm_cpumask is not empty. For the init_mm however its mm_cpumask has never any bits set. Which in turn means that our flush_tlb_kernel_range() implementation doesn't work at all. This can be easily verified with a vmalloc/vfree loop which allocates a page, writes to it and then frees the page again. A crash will follow almost instantly. To fix this remove the cpumask_empty() check in __tlb_flush_mm() since there shouldn't be too many mms with a zero mm_cpumask, besides the init_mm of course. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
David Rientjes authored
commit 6c4d3bc9 upstream. Commit 1d9d8639 ("perf,x86: fix kernel crash with PEBS/BTS after suspend/resume") introduces a link failure since perf_restore_debug_store() is only defined for CONFIG_CPU_SUP_INTEL: arch/x86/power/built-in.o: In function `restore_processor_state': (.text+0x45c): undefined reference to `perf_restore_debug_store' Fix it by defining the dummy function appropriately. Signed-off-by:
David Rientjes <rientjes@google.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Linus Torvalds authored
commit 2a6e06b2 upstream. Commit 1d9d8639 ("perf,x86: fix kernel crash with PEBS/BTS after suspend/resume") fixed a crash when doing PEBS performance profiling after resuming, but in using init_debug_store_on_cpu() to restore the DS_AREA mtrr it also resulted in a new WARN_ON() triggering. init_debug_store_on_cpu() uses "wrmsr_on_cpu()", which in turn uses CPU cross-calls to do the MSR update. Which is not really valid at the early resume stage, and the warning is quite reasonable. Now, it all happens to _work_, for the simple reason that smp_call_function_single() ends up just doing the call directly on the CPU when the CPU number matches, but we really should just do the wrmsr() directly instead. This duplicates the wrmsr() logic, but hopefully we can just remove the wrmsr_on_cpu() version eventually. Reported-and-tested-by:
Parag Warudkar <parag.lkml@gmail.com> Signed-off-by:
-
Stephane Eranian authored
commit 1d9d8639 upstream. This patch fixes a kernel crash when using precise sampling (PEBS) after a suspend/resume. Turns out the CPU notifier code is not invoked on CPU0 (BP). Therefore, the DS_AREA (used by PEBS) is not restored properly by the kernel and keeps it power-on/resume value of 0 causing any PEBS measurement to crash when running on CPU0. The workaround is to add a hook in the actual resume code to restore the DS Area MSR value. It is invoked for all CPUS. So for all but CPU0, the DS_AREA will be restored twice but this is harmless. Reported-by:
Stephane Eranian <eranian@google.com> Signed-off-by:
Shuah Khan <shuah.khan@hp.com> Signed-off-by:
-
Dan Carpenter authored
commit 4502403d upstream. The call tree here is: sk_clone_lock() <- takes bh_lock_sock(newsk); xfrm_sk_clone_policy() __xfrm_sk_clone_policy() clone_policy() <- uses GFP_ATOMIC for allocations security_xfrm_policy_clone() security_ops->xfrm_policy_clone_security() selinux_xfrm_policy_clone() Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
James Morris <james.l.morris@oracle.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
commit d63ac5f6 upstream. Commit 44ae3ab3 forgot to update the entry for the 970MP rev 1.0 processor when moving some CPU features bits to the MMU feature bit mask. This breaks booting on some rare G5 models using that chip revision. Reported-by:
Phileas Fogg <phileas-fogg@mail.ru> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Marcin Jurkowski authored
commit 9d1817ca upstream. On Sat, Mar 02, 2013 at 10:45:10AM +0100, Sven Geggus wrote: > This is the bad commit I found doing git bisect: > 04f482fa is the first bad commit > commit 04f482fa > Author: Patrick McHardy <kaber@trash.net> > Date: Mon Mar 28 08:39:36 2011 +0000 Good job. I was too lazy to bisect for bad commit;) Reading the code I found problematic kthread_should_stop call from netlink connector which causes the oops. After applying a patch, I've been testing owfs+w1 setup for nearly two days and it seems to work very reliable (no hangs, no memleaks etc). More detailed description and possible fix is given below: Function w1_search can be called from either kthread or netlink callback. While the former works fine, the latter causes oops due to kthread_should_stop invocation. This patch adds a check if w1_search is serving netlink command, skipping kthread_should_stop invocation if so. Signed-off-by:
Marcin Jurkowski <marcin1j@gmail.com> Acked-by:
Evgeniy Polyakov <zbr@ioremap.net> Cc: Josh Boyer <jwboyer@gmail.com> Tested-by:
Sven Geggus <lists@fuchsschwanzdomain.de> Signed-off-by:
-
Axel Lin authored
commit df069079 upstream. Signed-off-by:
Axel Lin <axel.lin@ingics.com> Acked-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Takashi Iwai authored
commit 66efdc71 upstream. snd_seq_timer_open() didn't catch the whole error path but let through if the timer id is a slave. This may lead to Oops by accessing the uninitialized pointer. BUG: unable to handle kernel NULL pointer dereference at 00000000000002ae IP: [<ffffffff819b3477>] snd_seq_timer_open+0xe7/0x130 PGD 785cd067 PUD 76964067 PMD 0 Oops: 0002 [#4] SMP CPU 0 Pid: 4288, comm: trinity-child7 Tainted: G D W 3.9.0-rc1+ #100 Bochs Bochs RIP: 0010:[<ffffffff819b3477>] [<ffffffff819b3477>] snd_seq_timer_open+0xe7/0x130 RSP: 0018:ffff88006ece7d38 EFLAGS: 00010246 RAX: 0000000000000286 RBX: ffff88007851b400 RCX: 0000000000000000 RDX: 000000000000ffff RSI: ffff88006ece7d58 RDI: ffff88006ece7d38 RBP: ffff88006ece7d98 R08: 000000000000000a R09: 000000000000fffe R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff8800792c5400 R14: 0000000000e8f000 R15: 0000000000000007 FS: 00007f7aaa650700(0000) GS:ffff88007f800000(0000) GS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000002ae CR3: 000000006efec000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process trinity-child7 (pid: 4288, threadinfo ffff88006ece6000, task ffff880076a8a290) Stack: 0000000000000286 ffffffff828f2be0 ffff88006ece7d58 ffffffff810f354d 65636e6575716573 2065756575712072 ffff8800792c0030 0000000000000000 ffff88006ece7d98 ffff8800792c5400 ffff88007851b400 ffff8800792c5520 Call Trace: [<ffffffff810f354d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff819b17e9>] snd_seq_queue_timer_open+0x29/0x70 [<ffffffff819ae01a>] snd_seq_ioctl_set_queue_timer+0xda/0x120 [<ffffffff819acb9b>] snd_seq_do_ioctl+0x9b/0xd0 [<ffffffff819acbe0>] snd_seq_ioctl+0x10/0x20 [<ffffffff811b9542>] do_vfs_ioctl+0x522/0x570 [<ffffffff8130a4b3>] ? file_has_perm+0x83/0xa0 [<ffffffff810f354d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff811b95ed>] sys_ioctl+0x5d/0xa0 [<ffffffff813663fe>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff81faed69>] system_call_fastpath+0x16/0x1b Reported-and-tested-by:
Tommi Rantala <tt.rantala@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 2431496f as it was applied incorrectly twice. Thanks to Jiri for pointing this out. Cc: Jiri Slaby <jslaby@suse.cz> Cc: Andrew Vagin <avagin@openvz.org> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
