The actual x401u does not use the so named x401u quirk but the x55u quirk.
All that the x401u quirk does it setting wapf to 4, so rename it to wapf4 to
stop the confusion.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

Change the name of the hwmon interface from "compal-laptop" to "compal".
A dash is an invalid character for a hwmon name and caused the call to
hwmon_device_register_with_groups() to fail.
Signed-off-by: Roald Frederickx <roald.frederickx@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

The Toshiba Qosmio X75-A series models also come with
the new keymap layout.

This patch adds this model to the alt_keymap_dmi list,
along with an extra key found on these models.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

Some Toshiba models (most notably Qosmios) come with an
incomplete backlight method where the AML code doesn't
check for write or read commands and always returns
HCI_SUCCESS and the actual brightness (and in some
cases the max brightness), thus allowing the backlight
interface to be registered without write support.

This patch changes the set_lcd_brightness function,
checking the returned values for values greater than
zero to avoid registering a broken backlight interface.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

If this is going away, it won't be in 2012.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

Yoga models don't offer touchpad ctrl through the ideapad interface, causing
ideapad_sync_touchpad_state to send wrong touchpad enable/disable events.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

As reported here: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1173681
the X550CC needs wapf=4 too.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

These variables don't need to be visible outside of this compilation
unit, make them static.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

Mark volume_alsa_control_vol and volume_alsa_control_mute as __initdata,
as snd_ctl_new1() will copy the relevant parts, so there is no need to
keep the master copies around after initialization.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

The DMI table is only ever used during initialization. Mark it as
__initconst so its memory can be released afterwards -- roughly 1.5 kB.
In turn, the callback functions can be marked with __init, too.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

These functions are only called from other initialization routines, so
can be marked __init, too.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

Constify the lis3lv02d_device_ids[] ACPI and the lis3lv02d_dmi_ids[] DMI
tables. There's no need to have them writeable during runtime.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

The DMI table is already marked as __initconst, so can be the callback
functions as they're only used in that context.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Robert Gerlach <khnz@gmx.de>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

The dell_quirks[] DMI table is only ever used during initialization.
Mark it as __initconst so its memory can be released afterwards --
roughly 5.7 kB. In turn, the callback function can be marked with
__init, too.

Also the touchpad_led_init() function can be marked __init as it's only
referenced from dell_init() -- an __init function.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

Constify the asus_quirks[] DMI table. There's no need to have it
writeable during runtime.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

Quite a lot of code and data of acer-wmi.c is only ever used during
initialization. Mark those accordingly -- and constify, where
appropriate -- so the memory can be released afterwards.

All in all those changes move ~10 kB of code and data to the .init
sections, marking them for release after initialization has finished.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: "Lee, Chun-Yi" <jlee@suse.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

Constify the asus_quirks[] DMI table. There's no need to have it
writeable during runtime.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

The DMI table is only ever used during initialization. Mark it as
__initconst so its memory can be released appropriately. In turn, the
callback function can be marked with __init, too.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

Encapsulate acer_suspend() and acer_resume with #ifdef CONFIG_PM_SLEEP
to get rid of the following warnings:

  ../acer-wmi.c:2046:12: warning: ‘acer_suspend’ defined but not used [-Wunused-function]
  ../acer-wmi.c:2068:12: warning: ‘acer_resume’ defined but not used [-Wunused-function]
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: "Lee, Chun-Yi" <jlee@suse.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

sparse_keymap_setup() will make a copy of the keymap, so we can release
the master copy after initialization.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: "Lee, Chun-Yi" <jlee@suse.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

The repo on kernel.org is no longer available but has a replacement at
cavan.codon.org.uk.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

This patch removes the null test on block. block is initialized at the
beginning of the function to &wblock->gblock. Since wblock is
dereferenced prior to the null test, wblock must be a valid pointer,
and &wblock->gblock cannot be null.

The following Coccinelle script is used for detecting the change:

@r@
expression e,f;
identifier g,y;
statement S1,S2;
@@

*e = &f->g
<+...
 f->y
 ...+>
*if (e != NULL || ...)
 S1 else S2
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=80231Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

As reported here: https://bugs.launchpad.net/bugs/1277959
the X550CL needs wapf=4 too.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

BIOS won't light on the wifi-led after S3, so asus-wmi driver needs to
control the wifi and wifi-led status.
But, it'll lead to bt status error if asus-wmi driver controls bt as well.
So, for X200CA, asus-wmi driver controls wifi status only and have to set
wapf to 1.
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

Wifi will be controlled by asus-wmi driver when wapf > 0
So, controls the wifi-led when wapf > 0
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

When bl_power support got added to asus-wmi, the error handling for it was
written to ignore -ENODEV, to avoid not registering a backlight interface for
models which have no bl_power control, but do have brightness control.

At the same time the error handling for brightness_max was modified to do the
same, this is wrong, when there is no brightness_max asus-wmi should not
register a backlight interface.

Note the caller of asus_wmi_backlight_init already special cases -ENODEV,
and will not cause the wmi driver regristration to fail because of a
-ENODEV return from asus_wmi_backlight_init.

https://bugzilla.redhat.com/show_bug.cgi?id=1097436Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

Some Asus motherboards for desktop PC-s export an acpi-video interface
advertising backlight support. Test the dmi chassis-type and tell acpi-video
to not register a backlight interface on desktops.

https://bugzilla.redhat.com/show_bug.cgi?id=1097436Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

It seems that the same problems which lead to adding an rfkill blacklist and
putting the Lenovo Yoga 2 11 on it are also present on the Lenovo Yoga 2 13
and Lenovo Yoga 2 Pro too:
https://bugzilla.redhat.com/show_bug.cgi?id=1021036
https://forums.lenovo.com/t5/Linux-Discussion/Yoga-2-13-not-Pro-Linux-Warning/m-p/1517612

Testing has shown that the firmware rfkill settings are persistent over
reboots. So blacklisting the driver is not good enough, if the wifi is blocked
at the firmware level the wifi needs to be explictly unblocked through the
ideapad-laptop interface.

And at least on the Lenovo Yoga 2 13 the VPCCMD_RF register which on devices
with hardware kill switch reports the hardware switch state, needs to be
explictly set to 1 (radio enabled / not blocked).

So this patch does 3 things to get proper rfkill handling on these models:

1) Instead of blacklisting the rfkill functionality, which means that people
with a firmware blocked wifi get stuck in that situation, ignore the value
reported by the not present hardware rfkill switch, as this is what is causing
ideapad-laptop to wrongly report all radios as hardware blocks. But do register
the rfkill interfaces so that the user can soft [un]block them.

2) On models without a hardware rfkill switch, explictly set VPCCMD_RF to 1

3) Drop the " 11" postfix from the dmi match string, as the entire Yoga 2
series is affected.

Yoga 2 11:
Reported-and-tested-by: Vincent Gerris <vgerris@gmail.com>

Yoga 2 13:
Tested-by: madls05 <http://ubuntuforums.org/showthread.php?t=2215044>

Yoga 2 Pro:
Reported-and-tested-by: Peter F. Patel-Schneider <pfpschneider@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

The new keyboard found on the *40 models is also being sold as a standalone
keyboard (with trackpoint):
http://shop.lenovo.com/us/en/itemdetails/0B47189/460/60AC6A0372B14F5BA7B12F1FF88E33C7

This uses a standard HUT code for the F12 key with the 6 square boxes on it,
which gets mapped to KEY_FILE by the kernel. Change the mapping done of
identical laptop key done by thinkpad_acpi to also send KEY_FILE for
consistency.

Cc: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

The _set and _get arguments to the EEEPC_CREATE_SENSOR_ATTR() macro
are confusingly named: _set should be _get and vice versa. Rename these
arguments.

Drop the trailing semicolon from that macro, while we're at it.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

When CONFIG_FUJITSU_LAPTOP_DEBUG is disabled and W=1, the
fujitsu-laptop driver builds with the following warnings:

drivers/platform/x86/fujitsu-laptop.c: In function "bl_update_status":
drivers/platform/x86/fujitsu-laptop.c:409:8: warning: suggest braces around empty body in an "if" statement [-Wempty-body]
    ret);
        ^
drivers/platform/x86/fujitsu-laptop.c:418:8: warning: suggest braces around empty body in an "if" statement [-Wempty-body]
    ret);
        ^

Rework the debug printk helper macro to get rid of these. I verified
that this change has no effect on the generated binary, both in the
debug and non-debug case.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Cc: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

Signed-off-by: mog422 <admin@mog422.net>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

The 'asus-nb-wmi' WAPF parameter must be set to 4, so the internal Wireless LAN device is operational.
Signed-off-by: poma <pomidorabelisima@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

Pull more SCSI changes from James Bottomley:
 "This is a small set of updates which missed the first pull.  It's more
  msix updates, some iscsi and qla4xxx fixes, we also have some string
  null termination fixes a return value fix and a couple of pm8001
  firmware fixes.

  Just a note, we do have a couple of bug fixes coming under separate
  cover, but they don't have to be part of the merge window"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  iscsi class: Fix freeing of skb in get host error path
  scsi: fix u14-34f printk format warnings
  pm8001: fix pm8001_store_update_fw
  pm8001: Fix erratic calculation in update_flash
  pm8001: Update MAINTAINERS list
  libiscsi: return new error code when nop times out
  iscsi class: fix get_host_stats return code when not supported
  iscsi class: fix get_host_stats error handling
  qla4xxx: fix get_host_stats error propagation
  qla4xxx: check the return value of dma_alloc_coherent()
  scsi: qla4xxx: ql4_mbx.c: Cleaning up missing null-terminate in conjunction with strncpy
  scsi: qla4xxx: ql4_os.c: Cleaning up missing null-terminate in conjunction with strncpy
  qla4xxx: Use pci_enable_msix_exact() instead of pci_enable_msix()
  pm8001: Use pci_enable_msix_exact() instead of pci_enable_msix()

Pull input layer fixes from Dmitry Torokhov:
 "Second round of updates for the input subsystem.  Mostly small fixups
  to the code merged in the first round (atmel_mxt_ts, wacom) but also a
  smallish patch to xbox driver to support Xbox One controllers and a
  patch to better handle Synaptics profile sensors found in Cr-48
  Chromebooks that should not affect any other devices"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: edt-ft5x06 - remove superfluous assignment
  Input: xpad - add support for Xbox One controllers
  Input: atmel_mxt_ts - fix a few issues reported by Coverity
  Input: atmel_mxt_ts - split config update a bit
  Input: atmel_mxt_ts - simplify mxt_initialize a bit
  Input: joystick - use get_cycles on ARMv8
  Input: wacom - fix compiler warning if !CONFIG_PM
  Input: cap1106 - allow changing key mapping from userspace
  Input: synaptics - use firmware data for Cr-48
  Input: synaptics - properly initialize slots for semi-MT
  Input: MT - make slot cleanup callable outside mt_sync_frame()
  Input: atmel_mxt_ts - mXT224 DMA quirk was fixed in firmware v2.0.AA

Pull sound fixes from Takashi Iwai:
 "Here is the additional fix patches that have been queued up since the
  previous pull request.  A few HD-audio fixes, a USB-audio quirk
  addition, and a couple of trivial cleanup for the legacy OSS codes"

* tag 'sound-fix-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Set TLV_DB_SCALE_MUTE bit for cx5051 vmaster
  ALSA: hda/ca0132 - Don't try loading firmware at resume when already failed
  ALSA: hda - Fix pop noises on reboot for Dell XPS 13 9333
  ALSA: hda - Set internal mic as default input source on Dell XPS 13 9333
  ALSA: usb-audio: fix BOSS ME-25 MIDI regression
  ALSA: hda - Fix parsing of CMI8888 codec
  ALSA: hda - Fix probing and stuttering on CMI8888 HD-audio controller
  ALSA: hda/realtek - Fixed ALC286/ALC288 recording delay for Headset Mic
  sound: oss: Remove typedefs wanc_info and wavnc_port_info
  sound: oss: uart401: Remove typedef uart401_devc

Pull drm fixes (mostly nouveau) from Dave Airlie:
 "One doc buidling fixes for a file that moved, along with a bunch of
  nouveau fixes, one a build problem on ARM"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/doc: Refer to proper source file
  drm/nouveau/platform: fix compilation error
  drm/nouveau/gk20a: add LTC device
  drm/nouveau: warn if we fail to re-pin fb on resume
  drm/nouveau/nvif: fix dac load detect method definition
  drm/gf100-/gr: fix -ENOSPC detection when allocating zbc table entries
  drm/nouveau/nvif: return null pointers on failure, in addition to ret != 0
  drm/nouveau/ltc: fix tag base address getting truncated if above 4GiB
  drm/nvc0-/fb/ram: fix use of non-existant ram if partitions aren't uniform
  drm/nouveau/bar: behave better if ioremap failed
  drm/nouveau/kms: nouveau_fbcon_accel_fini can be static
  drm/nouveau: kill unused variable warning if !__OS_HAS_AGP
  drm/nouveau/nvif: fix a number of notify thinkos

Pull EDAC updates from Mauro Carvalho Chehab.

* 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac:
  sb_edac: add support for Haswell based systems
  sb_edac: Fix mix tab/spaces alignments
  edac: add DDR4 and RDDR4
  sb_edac: remove bogus assumption on mc ordering
  sb_edac: make minimal use of channel_mask
  sb_edac: fix socket detection on Ivy Bridge controllers
  sb_edac: update Kconfig description
  sb_edac: search devices using product id
  sb_edac: make RIR limit retrieval per model
  sb_edac: make node id retrieval per model
  sb_edac: make memory type detection per memory controller