- 28 Oct, 2021 1 commit
-
-
Stephan Gerhold authored
In some configurations, the BAM DMA controller is set up by a remote processor and the local processor can simply start making use of it without setting up the BAM. This is already supported using the "qcom,controlled-remotely" property. However, for some reason another possible configuration is that the remote processor is responsible for powering up the BAM, but we are still responsible for initializing it (e.g. resetting it etc). Add a "qcom,powered-remotely" property to describe that configuration. Signed-off-by:
Stephan Gerhold <stephan@gerhold.net> Acked-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Bhupesh Sharma <bhupesh.sharma@linaro.org> Link: https://lore.kernel.org/r/20211018102421.19848-2-stephan@gerhold.netSigned-off-by:
Vinod Koul <vkoul@kernel.org>
-
- 26 Oct, 2021 7 commits
-
-
Cai Huoqing authored
Without CONFIG_PM_SLEEP, the runtime suspend/resume functions are unused, producing a warning: ../drivers/dma/sa11x0-dma.c:1042:12: error: 'sa11x0_dma_resume' defined but not used ../drivers/dma/sa11x0-dma.c:1004:12: error: 'sa11x0_dma_suspend' defined but not used Signed-off-by:
Cai Huoqing <caihuoqing@baidu.com> Link: https://lore.kernel.org/r/20211026020508.550-1-caihuoqing@baidu.comSigned-off-by:
-
Qing Wang authored
The wrappers in include/linux/pci-dma-compat.h should go away. pci_set_dma_mask()/pci_set_consistent_dma_mask() should be replaced with dma_set_mask()/dma_set_coherent_mask(), and use dma_set_mask_and_coherent() for both. Signed-off-by:
Qing Wang <wangqing@vivo.com> Reviewed-by:
Logan Gunthorpe <logang@deltatee.com> Link: https://lore.kernel.org/r/1633663733-47199-7-git-send-email-wangqing@vivo.comSigned-off-by:
-
Qing Wang authored
The wrappers in include/linux/pci-dma-compat.h should go away. pci_set_dma_mask()/pci_set_consistent_dma_mask() should be replaced with dma_set_mask()/dma_set_coherent_mask(), and use dma_set_mask_and_coherent() for both. Signed-off-by:
-
Qing Wang authored
The wrappers in include/linux/pci-dma-compat.h should go away. pci_set_dma_mask()/pci_set_consistent_dma_mask() should be replaced with dma_set_mask()/dma_set_coherent_mask(), and use dma_set_mask_and_coherent() for both. Signed-off-by:
-
Qing Wang authored
The wrappers in include/linux/pci-dma-compat.h should go away. pci_set_dma_mask()/pci_set_consistent_dma_mask() should be replaced with dma_set_mask()/dma_set_coherent_mask(), and use dma_set_mask_and_coherent() for both. Signed-off-by:
-
Qing Wang authored
The wrappers in include/linux/pci-dma-compat.h should go away. pci_set_dma_mask()/pci_set_consistent_dma_mask() should be replaced with dma_set_mask()/dma_set_coherent_mask(), and use dma_set_mask_and_coherent() for both. Signed-off-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/1633663733-47199-6-git-send-email-wangqing@vivo.comSigned-off-by:
-
Wang Qing authored
The wrappers in include/linux/pci-dma-compat.h should go away. pci_set_dma_mask()/pci_set_consistent_dma_mask() should be replaced with dma_set_mask()/dma_set_coherent_mask(), and use dma_set_mask_and_coherent() for both. Signed-off-by:
-
- 25 Oct, 2021 16 commits
-
-
Colin Ian King authored
Don't populate the read-only array ds_lut on the stack but instead it static. Also makes the object code smaller by 163 bytes: Before: text data bss dec hex filename 23508 4796 0 28304 6e90 ./drivers/dma/sh/rz-dmac.o After: text data bss dec hex filename 23281 4860 0 28141 6ded ./drivers/dma/sh/rz-dmac.o (gcc version 11.2.0) Signed-off-by:
Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210915112038.12407-1-colin.king@canonical.comSigned-off-by:
-
Xin Xiong authored
The issue happens in an error handling path. If of_dma_controller_register() fails, the function simply prints error messages and returns error code, without decrementing the reference count of pdev->device incremented earlier by dma_async_device_register(), which may result in refcount leaks. Fix it by invoking dma_async_device_unregister() before returning the error code. Signed-off-by:
Xin Xiong <xiongx18@fudan.edu.cn> Signed-off-by:
Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by:
Xin Tan <tanxin.ctf@gmail.com> Link: https://lore.kernel.org/r/20210911070533.3114-1-xiongx18@fudan.edu.cnSigned-off-by:
-
Len Baker authored
As noted in the "Deprecated Interfaces, Language Features, Attributes, and Conventions" documentation [1], size calculations (especially multiplication) should not be performed in memory allocator (or similar) function arguments due to the risk of them overflowing. This could lead to values wrapping around and a smaller allocation being made than the caller was expecting. Using those allocations could lead to linear overflows of heap memory and other misbehaviors. So, use the purpose specific kcalloc() function instead of the argument size * count in the kzalloc() function. [1] https://www.kernel.org/doc/html/v5.14/process/deprecated.html#open-coded-arithmetic-in-allocator-argumentsSigned-off-by:
Len Baker <len.baker@gmx.com> Link: https://lore.kernel.org/r/20210904145813.5161-1-len.baker@gmx.comSigned-off-by:
-
Shravya Kumbham authored
Modify the prototype from xilinx_dma_tx_descriptor to xilinx_dma_alloc_tx_descriptor and xilinx_dma_channel_set_config to xilinx_vdma_channel_set_config in API description to fix below linux kernel-doc warnings. drivers/dma/xilinx/xilinx_dma.c:800: warning: expecting prototype for xilinx_dma_tx_descriptor(). Prototype was for xilinx_dma_alloc_tx_descriptor() instead. drivers/dma/xilinx/xilinx_dma.c:2471: warning: expecting prototype for xilinx_dma_channel_set_config(). Prototype was for xilinx_vdma_channel_set_config() instead. Signed-off-by:
Shravya Kumbham <shravya.kumbham@xilinx.com> Signed-off-by:
Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1631525316-2323-1-git-send-email-radhey.shyam.pandey@xilinx.comSigned-off-by:
-
Cai Huoqing authored
Use the helper macro SET_NOIRQ_SYSTEM_SLEEP_PM_OPS() instead of the verbose operators ".suspend_noirq /.resume_noirq/.freeze_noirq/ .thaw_noirq/.poweroff_noirq/.restore_noirq", because the SET_NOIRQ_SYSTEM_SLEEP_PM_OPS() is a nice helper macro that could be brought in to make code a little clearer, a little more concise. Signed-off-by:
-
Dave Jiang authored
Device reset clears the MSIXPERM table and the device registers. Re-program the MSIXPERM table and re-enable the error interrupts post reset. Fixes: 745e92a6 ("dmaengine: idxd: idxd: move remove() bits for idxd 'struct device' to device.c") Reported-by:
Sanjay Kumar <sanjay.k.kumar@intel.com> Signed-off-by:
Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/163054188513.2853562.12077053294595278181.stgit@djiang5-desk3.ch.intel.comSigned-off-by:
-
Dave Jiang authored
Add halt interrupt support. Given that the misc interrupt handler already check halt state, the driver just need to run the halt handling code when receiving the halt interrupt. Signed-off-by:
-
Angelo Dureghello authored
Fix following panic on system halt: Requesting system halt [ 10.600000] spi spi0.1: spi_device 0.1 cleanup [ 10.630000] fsl_edma_chan_mux() fsl_chan->edma->n_chans 64 dmamux_nr 0 [ 10.630000] *** ZERO DIVIDE *** FORMAT=4 [ 10.630000] Current process id is 38 [ 10.630000] BAD KERNEL TRAP: 00000000 [ 10.630000] PC: [<402f09ba>] fsl_edma_chan_mux+0x7c/0x12e ... Some architecture as mcf5441x (ColdFire) may not have a dmamux, so dmamux_nr is set to 0. This patch considers this case. Signed-off-by:
Angelo Dureghello <angelo.dureghello@timesys.com> Link: https://lore.kernel.org/r/20210901211610.662077-1-angelo.dureghello@timesys.comSigned-off-by:
-
Bixuan Cui authored
Using list_move_tail() instead of list_del() + list_add_tail() Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Bixuan Cui <cuibixuan@huawei.com> Acked-by:
-
Arnd Bergmann authored
The ptdma driver has added debugfs support, but this fails to build when debugfs is disabled: drivers/dma/ptdma/ptdma-debugfs.c: In function 'ptdma_debugfs_setup': drivers/dma/ptdma/ptdma-debugfs.c:93:54: error: 'struct dma_device' has no member named 'dbg_dev_root' 93 | debugfs_create_file("info", 0400, pt->dma_dev.dbg_dev_root, pt, | ^ drivers/dma/ptdma/ptdma-debugfs.c:96:55: error: 'struct dma_device' has no member named 'dbg_dev_root' 96 | debugfs_create_file("stats", 0400, pt->dma_dev.dbg_dev_root, pt, | ^ drivers/dma/ptdma/ptdma-debugfs.c:102:52: error: 'struct dma_device' has no member named 'dbg_dev_root' 102 | debugfs_create_dir("q", pt->dma_dev.dbg_dev_root); | ^ Remove the #ifdef in the header, as this only saves a few bytes, but would require ugly #ifdefs in each driver using it. Simplify the other user while we're at it. Fixes: e2fb2e2a ("dmaengine: ptdma: Add debugfs entries for PTDMA") Fixes: 26cf132d ("dmaengine: Create debug directories for DMA devices") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20210920122017.205975-1-arnd@kernel.orgSigned-off-by:
-
Dave Jiang authored
Fault triggers on ioread32() when pci driver unbind is envoked. The placement of idxd sub-driver removal causes the probing of the device mmio region after the mmio mapping being torn down. The driver needs the sub-drivers to be unbound but not release the idxd context until all shutdown activities has been done. Move the sub-driver unregistering up before the remove() calls shutdown(). But take a device ref on the idxd->conf_dev so that the memory does not get freed in ->release(). When all cleanup activities has been done, release the ref to allow the idxd memory to be freed. [57159.542766] RIP: 0010:ioread32+0x27/0x60 [57159.547097] Code: 00 66 90 48 81 ff ff ff 03 00 77 1e 48 81 ff 00 00 01 00 76 05 0f b7 d7 ed c3 8b 15 03 50 41 01 b8 ff ff ff ff 85 d2 75 04 c3 <8b> 07 c3 55 83 ea 01 48 89 fe 48 c7 c7 00 70 5f 82 48 89 e5 48 83 [57159.566647] RSP: 0018:ffffc900011abb60 EFLAGS: 00010292 [57159.572295] RAX: ffffc900011e0000 RBX: ffff888107d39800 RCX: 0000000000000000 [57159.579842] RDX: 0000000000000000 RSI: ffffffff82b1e448 RDI: ffffc900011e0090 [57159.587421] RBP: ffffc900011abb88 R08: 0000000000000000 R09: 0000000000000001 [57159.594972] R10: 0000000000000001 R11: 0000000000000000 R12: ffff8881019840d0 [57159.602533] R13: ffff8881097e9000 R14: ffffffffa08542a0 R15: 00000000000003a8 [57159.610093] FS: 00007f991e0a8740(0000) GS:ffff888459900000(0000) knlGS:00000000000 00000 [57159.618614] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [57159.624814] CR2: ffffc900011e0090 CR3: 000000010862a002 CR4: 00000000003706e0 [57159.632397] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [57159.639973] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [57159.647601] Call Trace: [57159.650502] ? idxd_device_disable+0x41/0x110 [idxd] [57159.655948] idxd_device_drv_remove+0x2b/0x80 [idxd] [57159.661374] idxd_config_bus_remove+0x16/0x20 [57159.666191] __device_release_driver+0x163/0x240 [57159.671320] device_release_driver+0x2b/0x40 [57159.676052] bus_remove_device+0xf5/0x160 [57159.680524] device_del+0x19c/0x400 [57159.684440] device_unregister+0x18/0x60 [57159.688792] idxd_remove+0x140/0x1c0 [idxd] [57159.693406] pci_device_remove+0x3e/0xb0 [57159.697758] __device_release_driver+0x163/0x240 [57159.702788] device_driver_detach+0x43/0xb0 [57159.707424] unbind_store+0x11e/0x130 [57159.711537] drv_attr_store+0x24/0x30 [57159.715646] sysfs_kf_write+0x4b/0x60 [57159.719710] kernfs_fop_write_iter+0x153/0x1e0 [57159.724563] new_sync_write+0x120/0x1b0 [57159.728812] vfs_write+0x23e/0x350 [57159.732624] ksys_write+0x70/0xf0 [57159.736335] __x64_sys_write+0x1a/0x20 [57159.740492] do_syscall_64+0x3b/0x90 [57159.744465] entry_SYSCALL_64_after_hwframe+0x44/0xae [57159.749908] RIP: 0033:0x7f991e19c387 [57159.753898] Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 [57159.773564] RSP: 002b:00007ffc2ce2d6a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [57159.781550] RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f991e19c387 [57159.789133] RDX: 000000000000000c RSI: 000055ee2630e140 RDI: 0000000000000001 [57159.796695] RBP: 000055ee2630e140 R08: 0000000000000000 R09: 00007f991e2324e0 [57159.804246] R10: 00007f991e2323e0 R11: 0000000000000246 R12: 000000000000000c [57159.811800] R13: 00007f991e26f520 R14: 000000000000000c R15: 00007f991e26f700 [57159.819373] Modules linked in: idxd bridge stp llc bnep sunrpc nls_iso8859_1 intel_ rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp coretemp snd_hda_code c_realtek iTCO_wdt 8250_dw snd_hda_codec_generic kvm_intel ledtrig_audio iTCO_vendor_s upport snd_hda_intel snd_intel_dspcfg ppdev kvm snd_hda_codec intel_wmi_thunderbolt sn d_hwdep irqbypass iwlwifi btusb snd_hda_core rapl btrtl intel_cstate snd_seq btbcm snd _seq_device btintel snd_pcm cfg80211 bluetooth pcspkr psmouse input_leds snd_timer int el_lpss_pci mei_me intel_lpss snd ecdh_generic ecc mei ucsi_acpi i2c_i801 idma64 i2c_s mbus virt_dma soundcore typec_ucsi typec wmi parport_pc parport video mac_hid acpi_pad sch_fq_codel drm ip_tables x_tables crct10dif_pclmul crc32_pclmul ghash_clmulni_intel usbkbd hid_generic usbmouse aesni_intel usbhid crypto_simd cryptd e1000e hid serio_ra w ahci libahci pinctrl_sunrisepoint fuse msr autofs4 [last unloaded: idxd] [57159.904082] CR2: ffffc900011e0090 [57159.907877] ---[ end trace b4e32f49ce9176a4 ]--- Fixes: 49c4959f ("dmaengine: idxd: fix sequence for pci driver remove() and shutdown()") Reported-by:
Ziye Yang <ziye.yang@intel.com> Signed-off-by:
-
Dave Jiang authored
Remove setting of wq type on guest kernel during configuration load on RO device config. The user will set the kernel wq type and this setting based on config is not necessary. Signed-off-by:
-
Dongliang Mu authored
Since pm_runtime_put is done when tegra_adma_probe is successful, we cannot do pm_runtime_put_sync again in tegra_adma_remove. Fix this by removing the pm_runtime_put_sync in tegra_adma_remove. Signed-off-by:
Dongliang Mu <mudongliangabcd@gmail.com> Reviewed-by:
Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20211021031432.3466261-1-mudongliangabcd@gmail.comSigned-off-by:
-
Dongliang Mu authored
The previous commit 059e969c ("dmaengine: tegra210-adma: Using pm_runtime_resume_and_get to replace open coding") forgets to replace the pm_runtime_get_sync in the tegra_adma_probe, but removes the pm_runtime_put_noidle. Fix this by continuing to replace pm_runtime_get_sync with pm_runtime_resume_and_get in tegra_adma_probe. Fixes: 059e969c ("dmaengine: tegra210-adma: Using pm_runtime_resume_and_get to replace open coding") Signed-off-by:
-
Dongliang Mu authored
In rcar_dmac_probe, if pm_runtime_resume_and_get fails, it forgets to disable runtime PM. And of_dma_controller_free should only be invoked after the success of of_dma_controller_register. Fix this by refactoring the error handling code. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20211020143546.3436205-1-mudongliangabcd@gmail.comSigned-off-by:
-
Lars-Peter Clausen authored
Before the `callback_result` callback was introduced drivers coded their invocation to the callback in a similar way to: if (cb->callback) { spin_unlock(&dma->lock); cb->callback(cb->callback_param); spin_lock(&dma->lock); } With the introduction of `callback_result` two helpers where introduced to transparently handle both types of callbacks. And drivers where updated to look like this: if (dmaengine_desc_callback_valid(cb)) { spin_unlock(&dma->lock); dmaengine_desc_callback_invoke(cb, ...); spin_lock(&dma->lock); } dmaengine_desc_callback_invoke() correctly handles both `callback_result` and `callback`. But we forgot to update the dmaengine_desc_callback_valid() function to check for `callback_result`. As a result DMA descriptors that use the `callback_result` rather than `callback` don't have their callback invoked by drivers that follow the pattern above. Fix this by checking for both `callback` and `callback_result` in dmaengine_desc_callback_valid(). Fixes: f067025b ("dmaengine: add support to provide error result from a DMA transation") Signed-off-by:Lars-Peter Clausen <lars@metafoo.de> Acked-by:
-
- 18 Oct, 2021 16 commits
-
-
Flavio Suligoi authored
Space prohibited between function name and open parenthesis '(' Signed-off-by:Flavio Suligoi <f.suligoi@asem.it> Link: https://lore.kernel.org/r/20210928151833.589843-4-f.suligoi@asem.itSigned-off-by:
-
Flavio Suligoi authored
Alignment should match open parenthesis. Signed-off-by:
-
Flavio Suligoi authored
The "if" conditional statement is not a single statement, so both branches require braces. Signed-off-by:
-
Flavio Suligoi authored
Braces {} are not necessary for single statement blocks. Signed-off-by: -
Pandith N authored
Add support for setting dma coherent mask, dma mask is set to 64 bit Signed-off-by:
Pandith N <pandith.n@intel.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20211001140812.24977-4-pandith.n@intel.comSigned-off-by:
-
Pandith N authored
Added hardware handshake selection in channel config, for mem2per and per2mem case. The peripheral specific handshake interface needs to be programmed in src_per, dst_per bits of CHx_CFG register. Signed-off-by:
-
Pandith N authored
Added support for DMA controller with more than 8 channels. DMAC register map changes based on number of channels. Enabling DMAC channel: DMAC_CHENREG has to be used when number of channels <= 8 DMAC_CHENREG2 has to be used when number of channels > 8 Configuring DMA channel: CHx_CFG has to be used when number of channels <= 8 CHx_CFG2 has to be used when number of channels > 8 Suspending and resuming channel: DMAC_CHENREG has to be used when number of channels <= 8 DMAC_CHSUSPREG has to be used for suspending a channel > 8 Signed-off-by:
-
Amelie Delaunay authored
Theorically, address pointers used by STM32 DMA must be chosen so as to ensure that all transfers within a burst block are aligned on the address boundary equal to the size of the transfer. If this is always the case for peripheral addresses on STM32, it is not for memory addresses if the user doesn't respect this alignment constraint. To avoid a weird behavior of the DMA controller in this case (no error triggered but data are not transferred as expected), force no burst. Signed-off-by:
Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20211011094259.315023-4-amelie.delaunay@foss.st.comSigned-off-by:
-
Amelie Delaunay authored
buf_addr parameter of stm32_dma_set_xfer_param function is a dma_addr_t. We only need to check the remainder of buf_addr/max_width, so, no need to use do_div and extra u64 addr. Use '%' instead. Fixes: e0ebdbdc ("dmaengine: stm32-dma: take address into account when computing max width") Signed-off-by:
-
Amelie Delaunay authored
To prevent accidental repeated completion, mark pending descriptor complete in terminate_all. It can be the case when terminate_all is called while no end of transfer interrupt occurs. Signed-off-by:
-
Christophe JAILLET authored
'head' is unused, remove it. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/46e071be21fbc5ac5c35d4796a7e4249e94c3a77.1633847306.git.christophe.jaillet@wanadoo.frSigned-off-by:
-
Artur Rojek authored
Total amount of SG list entries executed in a single burst is limited by the number of available DMA descriptors. This information is useful for device drivers utilizing this DMA engine. Signed-off-by:
Artur Rojek <contact@artur-rojek.eu> Acked-by:
Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20210829195805.148964-1-contact@artur-rojek.euSigned-off-by:
-
Biju Das authored
Currently, DMA clocks are turned on by the bootloader. This patch adds support for DMA clock handling so that the driver manages the DMA clocks. Fixes: 5000d370 ("dmaengine: sh: Add DMAC driver for RZ/G2L SoC") Signed-off-by:
Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by:
-
Dave Jiang authored
Remove max_descs_per_engine field. The recently released DSA spec 1.2 [1] has removed this field and made it reserved. [1]: https://software.intel.com/content/dam/develop/external/us/en/documents-tps/341204-intel-data-streaming-accelerator-spec.pdfSigned-off-by:
-
Dave Jiang authored
DSA spec 1.2 has moved the GENCFG register under the GENCAP configuration support with respect to writability. Add check in driver before writing to GENCFG register. Signed-off-by:
-
Anatolij Gustschin authored
memset() and memcpy() on an MMIO region like here results in a lockup at startup on mpc5200 platform (since this first happens during probing of the ATA and Ethernet drivers). Use memset_io() and memcpy_toio() instead. Fixes: 2f9ea1bd ("bestcomm: core bestcomm support for Freescale MPC5200") Cc: stable@vger.kernel.org # v5.14+ Signed-off-by:
Anatolij Gustschin <agust@denx.de> Link: https://lore.kernel.org/r/20211014094012.21286-1-agust@denx.deSigned-off-by:
-
