- 26 Mar, 2024 10 commits
-
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfPaolo Abeni authored
Daniel Borkmann says: ==================== pull-request: bpf 2024-03-25 The following pull-request contains BPF updates for your *net* tree. We've added 17 non-merge commits during the last 12 day(s) which contain a total of 19 files changed, 184 insertions(+), 61 deletions(-). The main changes are: 1) Fix an arm64 BPF JIT bug in BPF_LDX_MEMSX implementation's offset handling found via test_bpf module, from Puranjay Mohan. 2) Various fixups to the BPF arena code in particular in the BPF verifier and around BPF selftests to match latest corresponding LLVM implementation, from Puranjay Mohan and Alexei Starovoitov. 3) Fix xsk to not assume that metadata is always requested in TX completion, from Stanislav Fomichev. 4) Fix riscv BPF JIT's kfunc parameter incompatibility between BPF and the riscv ABI which requires sign-extension on int/uint, from Pu Lehui. 5) Fix s390x BPF JIT's bpf_plt pointer arithmetic which triggered a crash when testing struct_ops, from Ilya Leoshkevich. 6) Fix libbpf's arena mmap handling which had incorrect u64-to-pointer cast on 32-bit architectures, from Andrii Nakryiko. 7) Fix libbpf to define MFD_CLOEXEC when not available, from Arnaldo Carvalho de Melo. 8) Fix arm64 BPF JIT implementation for 32bit unconditional bswap which resulted in an incorrect swap as indicated by test_bpf, from Artem Savkov. 9) Fix BPF man page build script to use silent mode, from Hangbin Liu. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: riscv, bpf: Fix kfunc parameters incompatibility between bpf and riscv abi bpf: verifier: reject addr_space_cast insn without arena selftests/bpf: verifier_arena: fix mmap address for arm64 bpf: verifier: fix addr_space_cast from as(1) to as(0) libbpf: Define MFD_CLOEXEC if not available arm64: bpf: fix 32bit unconditional bswap bpf, arm64: fix bug in BPF_LDX_MEMSX libbpf: fix u64-to-pointer cast on 32-bit arches s390/bpf: Fix bpf_plt pointer arithmetic xsk: Don't assume metadata is always requested in TX completion selftests/bpf: Add arena test case for 4Gbyte corner case selftests/bpf: Remove hard coded PAGE_SIZE macro. libbpf, selftests/bpf: Adjust libbpf, bpftool, selftests to match LLVM bpf: Clarify bpf_arena comments. MAINTAINERS: Update email address for Quentin Monnet scripts/bpf_doc: Use silent mode when exec make cmd bpf: Temporarily disable atomic operations in BPF arena ==================== Link: https://lore.kernel.org/r/20240325213520.26688-1-daniel@iogearbox.netSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Ido Schimmel authored
Locally generated IP multicast packets (such as the ones used in the test) do not perform routing and simply egress the bound device. However, as explained in commit 8bcfb4ae ("selftests: forwarding: Fix failing tests with old libnet"), old versions of libnet (used by mausezahn) do not use the "SO_BINDTODEVICE" socket option. Specifically, the library started using the option for IPv6 sockets in version 1.1.6 and for IPv4 sockets in version 1.2. This explains why on Ubuntu - which uses version 1.1.6 - the IPv4 overlay tests are failing whereas the IPv6 ones are passing. Fix by specifying the source and destination MAC of the packets which will cause mausezahn to use a packet socket instead of an IP socket. Fixes: 62199e3f ("selftests: net: Add VXLAN MDB test") Reported-by:
Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/5bb50349-196d-4892-8ed2-f37543aa863f@alu.unizg.hr/Tested-by:
Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20240325075030.2379513-1-idosch@nvidia.comSigned-off-by:
-
Sergey Shtylyov authored
Since the Renesas Ethernet Switch driver was added by Yoshihiro Shimoda, I started receiving the patches to review for it -- which I was unable to do, as I don't know this hardware and don't even have the manuals for it. Fortunately, Shimoda-san has volunteered to be a reviewer for this new driver, thus let's now split the single entry into 3 per-driver entries, each with its own reviewer... Signed-off-by:
Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by:
Simon Horman <horms@kernel.org> Acked-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/de0ccc1d-6fc0-583f-4f80-f70e6461d62d@omp.ruSigned-off-by:
-
Arınç ÜNAL authored
The MT7530 switch after reset initialises with a core clock frequency that works with a 25MHz XTAL connected to it. For 40MHz XTAL, the core clock frequency must be set to 500MHz. The mt7530_pll_setup() function is responsible of setting the core clock frequency. Currently, it runs on MT7530 with 25MHz and 40MHz XTAL. This causes MT7530 switch with 25MHz XTAL to egress and ingress frames improperly. Introduce a check to run it only on MT7530 with 40MHz XTAL. The core clock frequency is set by writing to a switch PHY's register. Access to the PHY's register is done via the MDIO bus the switch is also on. Therefore, it works only when the switch makes switch PHYs listen on the MDIO bus the switch is on. This is controlled either by the state of the ESW_P1_LED_1 pin after reset deassertion or modifying bit 5 of the modifiable trap register. When ESW_P1_LED_1 is pulled high, PHY indirect access is used. That means accessing PHY registers via the PHY indirect access control register of the switch. When ESW_P1_LED_1 is pulled low, PHY direct access is used. That means accessing PHY registers via the MDIO bus the switch is on. For MT7530 switch with 40MHz XTAL on a board with ESW_P1_LED_1 pulled high, the core clock frequency won't be set to 500MHz, causing the switch to egress and ingress frames improperly. Run mt7530_pll_setup() after PHY direct access is set on the modifiable trap register. With these two changes, all MT7530 switches with 25MHz and 40MHz, and P1_LED_1 pulled high or low, will egress and ingress frames properly. Link: https://github.com/BPI-SINOVOIP/BPI-R2-bsp/blob/4a5dd143f2172ec97a2872fa29c7c4cd520f45b5/linux-mt/drivers/net/ethernet/mediatek/gsw_mt7623.c#L1039 Fixes: b8f126a8 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Signed-off-by:
Arınç ÜNAL <arinc.unal@arinc9.com> Link: https://lore.kernel.org/r/20240320-for-net-mt7530-fix-25mhz-xtal-with-direct-phy-access-v1-1-d92f605f1160@arinc9.comSigned-off-by:
-
Bjørn Mork authored
Some of the registers are aligned on a 32bit boundary, causing alignment faults on 64bit platforms. Unable to handle kernel paging request at virtual address ffffffc084a1d004 Mem abort info: ESR = 0x0000000096000061 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x21: alignment fault Data abort info: ISV = 0, ISS = 0x00000061, ISS2 = 0x00000000 CM = 0, WnR = 1, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000046ad6000 [ffffffc084a1d004] pgd=100000013ffff003, p4d=100000013ffff003, pud=100000013ffff003, pmd=0068000020a00711 Internal error: Oops: 0000000096000061 [#1] SMP Modules linked in: mtk_t7xx(+) qcserial pppoe ppp_async option nft_fib_inet nf_flow_table_inet mt7921u(O) mt7921s(O) mt7921e(O) mt7921_common(O) iwlmvm(O) iwldvm(O) usb_wwan rndis_host qmi_wwan pppox ppp_generic nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir nft_quota nft_numgen nft_nat nft_masq nft_log nft_limit nft_hash nft_flow_offload nft_fib_ipv6 nft_fib_ipv4 nft_fib nft_ct nft_chain_nat nf_tables nf_nat nf_flow_table nf_conntrack mt7996e(O) mt792x_usb(O) mt792x_lib(O) mt7915e(O) mt76_usb(O) mt76_sdio(O) mt76_connac_lib(O) mt76(O) mac80211(O) iwlwifi(O) huawei_cdc_ncm cfg80211(O) cdc_ncm cdc_ether wwan usbserial usbnet slhc sfp rtc_pcf8563 nfnetlink nf_reject_ipv6 nf_reject_ipv4 nf_log_syslog nf_defrag_ipv6 nf_defrag_ipv4 mt6577_auxadc mdio_i2c libcrc32c compat(O) cdc_wdm cdc_acm at24 crypto_safexcel pwm_fan i2c_gpio i2c_smbus industrialio i2c_algo_bit i2c_mux_reg i2c_mux_pca954x i2c_mux_pca9541 i2c_mux_gpio i2c_mux dummy oid_registry tun sha512_arm64 sha1_ce sha1_generic seqiv md5 geniv des_generic libdes cbc authencesn authenc leds_gpio xhci_plat_hcd xhci_pci xhci_mtk_hcd xhci_hcd nvme nvme_core gpio_button_hotplug(O) dm_mirror dm_region_hash dm_log dm_crypt dm_mod dax usbcore usb_common ptp aquantia pps_core mii tpm encrypted_keys trusted CPU: 3 PID: 5266 Comm: kworker/u9:1 Tainted: G O 6.6.22 #0 Hardware name: Bananapi BPI-R4 (DT) Workqueue: md_hk_wq t7xx_fsm_uninit [mtk_t7xx] pstate: 804000c5 (Nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : t7xx_cldma_hw_set_start_addr+0x1c/0x3c [mtk_t7xx] lr : t7xx_cldma_start+0xac/0x13c [mtk_t7xx] sp : ffffffc085d63d30 x29: ffffffc085d63d30 x28: 0000000000000000 x27: 0000000000000000 x26: 0000000000000000 x25: ffffff80c804f2c0 x24: ffffff80ca196c05 x23: 0000000000000000 x22: ffffff80c814b9b8 x21: ffffff80c814b128 x20: 0000000000000001 x19: ffffff80c814b080 x18: 0000000000000014 x17: 0000000055c9806b x16: 000000007c5296d0 x15: 000000000f6bca68 x14: 00000000dbdbdce4 x13: 000000001aeaf72a x12: 0000000000000001 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : ffffff80ca1ef6b4 x7 : ffffff80c814b818 x6 : 0000000000000018 x5 : 0000000000000870 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 000000010a947000 x1 : ffffffc084a1d004 x0 : ffffffc084a1d004 Call trace: t7xx_cldma_hw_set_start_addr+0x1c/0x3c [mtk_t7xx] t7xx_fsm_uninit+0x578/0x5ec [mtk_t7xx] process_one_work+0x154/0x2a0 worker_thread+0x2ac/0x488 kthread+0xe0/0xec ret_from_fork+0x10/0x20 Code: f9400800 91001000 8b214001 d50332bf (f9000022) ---[ end trace 0000000000000000 ]--- The inclusion of io-64-nonatomic-lo-hi.h indicates that all 64bit accesses can be replaced by pairs of nonatomic 32bit access. Fix alignment by forcing all accesses to be 32bit on 64bit platforms. Link: https://forum.openwrt.org/t/fibocom-fm350-gl-support/142682/72 Fixes: 39d43904 ("net: wwan: t7xx: Add control DMA interface") Signed-off-by:
Bjørn Mork <bjorn@mork.no> Reviewed-by:
Sergey Ryazanov <ryazanov.s.a@gmail.com> Tested-by:
Liviu Dudau <liviu@dudau.co.uk> Link: https://lore.kernel.org/r/20240322144000.1683822-1-bjorn@mork.noSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
We had various syzbot reports about tcp timers firing after the corresponding netns has been dismantled. Fortunately Josef Bacik could trigger the issue more often, and could test a patch I wrote two years ago. When TCP sockets are closed, we call inet_csk_clear_xmit_timers() to 'stop' the timers. inet_csk_clear_xmit_timers() can be called from any context, including when socket lock is held. This is the reason it uses sk_stop_timer(), aka del_timer(). This means that ongoing timers might finish much later. For user sockets, this is fine because each running timer holds a reference on the socket, and the user socket holds a reference on the netns. For kernel sockets, we risk that the netns is freed before timer can complete, because kernel sockets do not hold reference on the netns. This patch adds inet_csk_clear_xmit_timers_sync() function that using sk_stop_timer_sync() to make sure all timers are terminated before the kernel socket is released. Modules using kernel sockets close them in their netns exit() handler. Also add sock_not_owned_by_me() helper to get LOCKDEP support : inet_csk_clear_xmit_timers_sync() must not be called while socket lock is held. It is very possible we can revert in the future commit 3a58f13a ("net: rds: acquire refcount on TCP sockets") which attempted to solve the issue in rds only. (net/smc/af_smc.c and net/mptcp/subflow.c have similar code) We probably can remove the check_net() tests from tcp_out_of_resources() and __tcp_close() in the future. Reported-by:
Josef Bacik <josef@toxicpanda.com> Closes: https://lore.kernel.org/netdev/20240314210740.GA2823176@perftesting/ Fixes: 26abe143 ("net: Modify sk_alloc to not reference count the netns of kernel sockets.") Fixes: 8a681736 ("net: sk_clone_lock() should only do get_net() if the parent is not a kernel socket") Link: https://lore.kernel.org/bpf/CANn89i+484ffqb93aQm1N-tjxxvb3WDKX0EbD7318RwRgsatjw@mail.gmail.com/Signed-off-by:
Eric Dumazet <edumazet@google.com> Tested-by:
-
Ravi Gunasekaran authored
commit e748d0fd ("net: hsr: Disable promiscuous mode in offload mode") disables promiscuous mode of slave devices while creating an HSR interface. But while deleting the HSR interface, it does not take care of it. It decreases the promiscuous mode count, which eventually enables promiscuous mode on the slave devices when creating HSR interface again. Fix this by not decrementing the promiscuous mode count while deleting the HSR interface when offload is enabled. Fixes: e748d0fd ("net: hsr: Disable promiscuous mode in offload mode") Signed-off-by:
Ravi Gunasekaran <r-gunasekaran@ti.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20240322100447.27615-1-r-gunasekaran@ti.comSigned-off-by:
-
Claus Hansen Ries authored
The function platform_get_resource was replaced with devm_platform_ioremap_resource_byname and is called using 0 as name. This eventually ends up in platform_get_resource_byname in the call stack, where it causes a null pointer in strcmp. if (type == resource_type(r) && !strcmp(r->name, name)) It should have been replaced with devm_platform_ioremap_resource. Fixes: bd69058f ("net: ll_temac: Use devm_platform_ioremap_resource_byname()") Signed-off-by:
Claus Hansen Ries <chr@terma.com> Cc: stable@vger.kernel.org Reviewed-by:
-
Alexandra Winter authored
The IO subsystem expects a driver to retry a ccw_device_start, when the subsequent interrupt response block (irb) contains a deferred condition code 1. Symptoms before this commit: On the read channel we always trigger the next read anyhow, so no different behaviour here. On the write channel we may experience timeout errors, because the expected reply will never be received without the retry. Other callers of qeth_send_control_data() may wrongly assume that the ccw was successful, which may cause problems later. Note that since commit 2297791c ("s390/cio: dont unregister subchannel from child-drivers") and commit 5ef1dc40 ("s390/cio: fix invalid -EBUSY on ccw_device_start") deferred CC1s are much more likely to occur. See the commit message of the latter for more background information. Fixes: 2297791c ("s390/cio: dont unregister subchannel from child-drivers") Signed-off-by:
Alexandra Winter <wintera@linux.ibm.com> Co-developed-by:
Thorsten Winkler <twinkler@linux.ibm.com> Signed-off-by:
Peter Oberparleiter <oberpar@linux.ibm.com> Link: https://lore.kernel.org/r/20240321115337.3564694-1-wintera@linux.ibm.comSigned-off-by:
-
Prasad Pandit authored
Indent config option type by a tab. It helps Kconfig parsers to read file without error. Fixes: 9431063a ("dpll: core: Add DPLL framework base functions") Signed-off-by:
Prasad Pandit <pjp@fedoraproject.org> Reviewed-by:
Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by:
-
- 25 Mar, 2024 3 commits
-
-
Pu Lehui authored
We encountered a failing case when running selftest in no_alu32 mode: The failure case is `kfunc_call/kfunc_call_test4` and its source code is like bellow: ``` long bpf_kfunc_call_test4(signed char a, short b, int c, long d) __ksym; int kfunc_call_test4(struct __sk_buff *skb) { ... tmp = bpf_kfunc_call_test4(-3, -30, -200, -1000); ... } ``` And its corresponding asm code is: ``` 0: r1 = -3 1: r2 = -30 2: r3 = 0xffffff38 # opcode: 18 03 00 00 38 ff ff ff 00 00 00 00 00 00 00 00 4: r4 = -1000 5: call bpf_kfunc_call_test4 ``` insn 2 is parsed to ld_imm64 insn to emit 0x00000000ffffff38 imm, and converted to int type and then send to bpf_kfunc_call_test4. But since it is zero-extended in the bpf calling convention, riscv jit will directly treat it as an unsigned 32-bit int value, and then fails with the message "actual 4294966063 != expected -1234". The reason is the incompatibility between bpf and riscv abi, that is, bpf will do zero-extension on uint, but riscv64 requires sign-extension on int or uint. We can solve this problem by sign extending the 32-bit parameters in kfunc. The issue is related to [0], and thanks to Yonghong and Alexei. Link: https://github.com/llvm/llvm-project/pull/84874 [0] Fixes: d40c3847 ("riscv, bpf: Add kfunc support for RV64") Signed-off-by:Pu Lehui <pulehui@huawei.com> Tested-by:
Puranjay Mohan <puranjay12@gmail.com> Reviewed-by:
Alexei Starovoitov <ast@kernel.org>
-
linke li authored
sk->sk_rcvbuf in __sock_queue_rcv_skb() and __sk_receive_skb() can be changed by other threads. Mark this as benign using READ_ONCE(). This patch is aimed at reducing the number of benign races reported by KCSAN in order to focus future debugging effort on harmful races. Signed-off-by:
linke li <lilinke99@qq.com> Reviewed-by:
David S. Miller <davem@davemloft.net>
-
David Thompson authored
The mlxbf_gige_open() routine starts the PHY as part of normal initialization. The mlxbf_gige_open() routine must stop the PHY during its error paths. Fixes: f92e1869 ("Add Mellanox BlueField Gigabit Ethernet driver") Signed-off-by:
David Thompson <davthompson@nvidia.com> Reviewed-by:
Asmaa Mnebhi <asmaa@nvidia.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
-
- 23 Mar, 2024 6 commits
-
-
Puranjay Mohan authored
The verifier allows using the addr_space_cast instruction in a program that doesn't have an associated arena. This was caught in the form an invalid memory access in do_misc_fixups() when while converting addr_space_cast to a normal 32-bit mov, env->prog->aux->arena was dereferenced to check for BPF_F_NO_USER_CONV flag. Reject programs that include the addr_space_cast instruction but don't have an associated arena. root@rv-tester:~# ./reproducer Unable to handle kernel access to user memory without uaccess routines at virtual address 0000000000000030 Oops [#1] [<ffffffff8017eeaa>] do_misc_fixups+0x43c/0x1168 [<ffffffff801936d6>] bpf_check+0xda8/0x22b6 [<ffffffff80174b32>] bpf_prog_load+0x486/0x8dc [<ffffffff80176566>] __sys_bpf+0xbd8/0x214e [<ffffffff80177d14>] __riscv_sys_bpf+0x22/0x2a [<ffffffff80d2493a>] do_trap_ecall_u+0x102/0x17c [<ffffffff80d3048c>] ret_from_exception+0x0/0x64 Fixes: 6082b6c3 ("bpf: Recognize addr_space_cast instruction in the verifier.") Reported-by:
xingwei lee <xrivendell7@gmail.com> Reported-by:
yue sun <samsun1006219@gmail.com> Closes: https://lore.kernel.org/bpf/CABOYnLz09O1+2gGVJuCxd_24a-7UueXzV-Ff+Fr+h5EKFDiYCQ@mail.gmail.com/Signed-off-by:
-
Puranjay Mohan authored
The arena_list selftest uses (1ull << 32) in the mmap address computation for arm64. Use the same in the verifier_arena selftest. This makes the selftest pass for arm64 on the CI[1]. [1] https://github.com/kernel-patches/bpf/pull/6622Signed-off-by:
-
Puranjay Mohan authored
The verifier currently converts addr_space_cast from as(1) to as(0) that is: BPF_ALU64 | BPF_MOV | BPF_X with off=1 and imm=1 to BPF_ALU | BPF_MOV | BPF_X with imm=1 (32-bit mov) Because of this imm=1, the JITs that have bpf_jit_needs_zext() == true, interpret the converted instruction as BPF_ZEXT_REG(DST) which is a special form of mov32, used for doing explicit zero extension on dst. These JITs will just zero extend the dst reg and will not move the src to dst before the zext. Fix do_misc_fixups() to set imm=0 when converting addr_space_cast to a normal mov32. The JITs that have bpf_jit_needs_zext() == true rely on the verifier to emit zext instructions. Mark dst_reg as subreg when doing cast from as(1) to as(0) so the verifier emits a zext instruction after the mov. Fixes: 6082b6c3 ("bpf: Recognize addr_space_cast instruction in the verifier.") Signed-off-by:
-
Ido Schimmel authored
Cited commit started returning an error when user space requests to dump the interface's IPv6 addresses and IPv6 is disabled on the interface. Restore the previous behavior and do not return an error. Before cited commit: # ip address show dev dummy1 2: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 link/ether 1a:52:02:5a:c2:6e brd ff:ff:ff:ff:ff:ff inet6 fe80::1852:2ff:fe5a:c26e/64 scope link proto kernel_ll valid_lft forever preferred_lft forever # ip link set dev dummy1 mtu 1000 # ip address show dev dummy1 2: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1000 qdisc noqueue state UNKNOWN group default qlen 1000 link/ether 1a:52:02:5a:c2:6e brd ff:ff:ff:ff:ff:ff After cited commit: # ip address show dev dummy1 2: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 link/ether 1e:9b:94:00:ac:e8 brd ff:ff:ff:ff:ff:ff inet6 fe80::1c9b:94ff:fe00:ace8/64 scope link proto kernel_ll valid_lft forever preferred_lft forever # ip link set dev dummy1 mtu 1000 # ip address show dev dummy1 RTNETLINK answers: No such device Dump terminated With this patch: # ip address show dev dummy1 2: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 link/ether 42:35:fc:53:66:cf brd ff:ff:ff:ff:ff:ff inet6 fe80::4035:fcff:fe53:66cf/64 scope link proto kernel_ll valid_lft forever preferred_lft forever # ip link set dev dummy1 mtu 1000 # ip address show dev dummy1 2: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1000 qdisc noqueue state UNKNOWN group default qlen 1000 link/ether 42:35:fc:53:66:cf brd ff:ff:ff:ff:ff:ff Fixes: 9cc4cc32 ("ipv6: use xa_array iterator to implement inet6_dump_addr()") Reported-by:Gal Pressman <gal@nvidia.com> Closes: https://lore.kernel.org/netdev/7e261328-42eb-411d-b1b4-ad884eeaae4d@linux.dev/Tested-by:
-
Dan Carpenter authored
The "*hw_stats_used" value needs to be set on the success paths to prevent an uninitialized variable bug in the caller, nla_put_nh_group_stats(). Fixes: 5072ae00 ("net: nexthop: Expose nexthop group HW stats to user space") Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by:
-
Jakub Kicinski authored
When we set members of simple nested structures in requests we need to set "presence" bits for all the nesting layers below. This has nothing to do with the presence type of the last layer. Fixes: be5bea1c ("net: add basic C code generators for Netlink") Reviewed-by:
Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20240321020214.1250202-1-kuba@kernel.orgSigned-off-by:
-
- 22 Mar, 2024 1 commit
-
-
Ryosuke Yasuoka authored
syzbot reported the following uninit-value access issue [1][2]: nci_rx_work() parses and processes received packet. When the payload length is zero, each message type handler reads uninitialized payload and KMSAN detects this issue. The receipt of a packet with a zero-size payload is considered unexpected, and therefore, such packets should be silently discarded. This patch resolved this issue by checking payload size before calling each message type handler codes. Fixes: 6a2968aa ("NFC: basic NCI protocol implementation") Reported-and-tested-by: syzbot+7ea9413ea6749baf5574@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+29b5ca705d2e0f4a44d2@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=7ea9413ea6749baf5574 [1] Closes: https://syzkaller.appspot.com/bug?extid=29b5ca705d2e0f4a44d2 [2] Signed-off-by:
Ryosuke Yasuoka <ryasuoka@redhat.com> Reviewed-by:
Jeremy Cline <jeremy@jcline.org> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
- 21 Mar, 2024 20 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from CAN, netfilter, wireguard and IPsec. I'd like to highlight [ lowlight? - Linus ] Florian W stepping down as a netfilter maintainer due to constant stream of bug reports. Not sure what we can do but IIUC this is not the first such case. Current release - regressions: - rxrpc: fix use of page_frag_alloc_align(), it changed semantics and we added a new caller in a different subtree - xfrm: allow UDP encapsulation only in offload modes Current release - new code bugs: - tcp: fix refcnt handling in __inet_hash_connect() - Revert "net: Re-use and set mono_delivery_time bit for userspace tstamp packets", conflicted with some expectations in BPF uAPI Previous releases - regressions: - ipv4: raw: fix sending packets from raw sockets via IPsec tunnels - devlink: fix devlink's parallel command processing - veth: do not manipulate GRO when using XDP - esp: fix bad handling of pages from page_pool Previous releases - always broken: - report RCU QS for busy network kthreads (with Paul McK's blessing) - tcp/rds: fix use-after-free on netns with kernel TCP reqsk - virt: vmxnet3: fix missing reserved tailroom with XDP Misc: - couple of build fixes for Documentation" * tag 'net-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (59 commits) selftests: forwarding: Fix ping failure due to short timeout MAINTAINERS: step down as netfilter maintainer netfilter: nf_tables: Fix a memory leak in nf_tables_updchain net: dsa: mt7530: fix handling of all link-local frames net: dsa: mt7530: fix link-local frames that ingress vlan filtering ports bpf: report RCU QS in cpumap kthread net: report RCU QS on threaded NAPI repolling rcu: add a helper to report consolidated flavor QS ionic: update documentation for XDP support lib/bitmap: Fix bitmap_scatter() and bitmap_gather() kernel doc netfilter: nf_tables: do not compare internal table flags on updates netfilter: nft_set_pipapo: release elements in clone only from destroy path octeontx2-af: Use separate handlers for interrupts octeontx2-pf: Send UP messages to VF only when VF is up. octeontx2-pf: Use default max_active works instead of one octeontx2-pf: Wait till detach_resources msg is complete octeontx2: Detect the mbox up or down message via register devlink: fix port new reply cmd type tcp: Clear req->syncookie in reqsk_alloc(). net/bnx2x: Prevent access to a freed page in page_pool ... -
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull Kbuild updates from Masahiro Yamada: - Generate a list of built DTB files (arch/*/boot/dts/dtbs-list) - Use more threads when building Debian packages in parallel - Fix warnings shown during the RPM kernel package uninstallation - Change OBJECT_FILES_NON_STANDARD_*.o etc. to take a relative path to Makefile - Support GCC's -fmin-function-alignment flag - Fix a null pointer dereference bug in modpost - Add the DTB support to the RPM package - Various fixes and cleanups in Kconfig * tag 'kbuild-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (67 commits) kconfig: tests: test dependency after shuffling choices kconfig: tests: add a test for randconfig with dependent choices kconfig: tests: support KCONFIG_SEED for the randconfig runner kbuild: rpm-pkg: add dtb files in kernel rpm kconfig: remove unneeded menu_is_visible() call in conf_write_defconfig() kconfig: check prompt for choice while parsing kconfig: lxdialog: remove unused dialog colors kconfig: lxdialog: fix button color for blackbg theme modpost: fix null pointer dereference kbuild: remove GCC's default -Wpacked-bitfield-compat flag kbuild: unexport abs_srctree and abs_objtree kbuild: Move -Wenum-{compare-conditional,enum-conversion} into W=1 kconfig: remove named choice support kconfig: use linked list in get_symbol_str() to iterate over menus kconfig: link menus to a symbol kbuild: fix inconsistent indentation in top Makefile kbuild: Use -fmin-function-alignment when available alpha: merge two entries for CONFIG_ALPHA_GAMMA alpha: merge two entries for CONFIG_ALPHA_EV4 kbuild: change DTC_FLAGS_<basetarget>.o to take the path relative to $(obj) ...
-
Linus Torvalds authored
Merge tag 'firewire-fixes-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire fixes Takashi Sakamoto: "The previous pull includes some regressions in some device attributes exposed to sysfs. They are fixed now" * tag 'firewire-fixes-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: core: add memo about the caller of show functions for device attributes Revert "firewire: Kill unnecessary buf check in device_attribute.show"
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds authored
Pull driver core updates from Greg KH: "Here is the "big" set of driver core and kernfs changes for 6.9-rc1. Nothing all that crazy here, just some good updates that include: - automatic attribute group hiding from Dan Williams (he fixed up my horrible attempt at doing this.) - kobject lock contention fixes from Eric Dumazet - driver core cleanups from Andy - kernfs rcu work from Tejun - fw_devlink changes to resolve some reported issues - other minor changes, all details in the shortlog All of these have been in linux-next for a long time with no reported issues" * tag 'driver-core-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (28 commits) device: core: Log warning for devices pending deferred probe on timeout driver: core: Use dev_* instead of pr_* so device metadata is added driver: core: Log probe failure as error and with device metadata of: property: fw_devlink: Add support for "post-init-providers" property driver core: Add FWLINK_FLAG_IGNORE to completely ignore a fwnode link driver core: Adds flags param to fwnode_link_add() debugfs: fix wait/cancellation handling during remove device property: Don't use "proxy" headers device property: Move enum dev_dma_attr to fwnode.h driver core: Move fw_devlink stuff to where it belongs driver core: Drop unneeded 'extern' keyword in fwnode.h firmware_loader: Suppress warning on FW_OPT_NO_WARN flag sysfs:Addresses documentation in sysfs_merge_group and sysfs_unmerge_group. firmware_loader: introduce __free() cleanup hanler platform-msi: Remove usage of the deprecated ida_simple_xx() API sysfs: Introduce DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE() sysfs: Document new "group visible" helpers sysfs: Fix crash on empty group attributes array sysfs: Introduce a mechanism to hide static attribute_groups sysfs: Introduce a mechanism to hide static attribute_groups ... -
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc and other driver subsystem updates from Greg KH: "Here is the big set of char/misc and a number of other driver subsystem updates for 6.9-rc1. Included in here are: - IIO driver updates, loads of new ones and evolution of existing ones - coresight driver updates - const cleanups for many driver subsystems - speakup driver additions - platform remove callback void cleanups - mei driver updates - mhi driver updates - cdx driver updates for MSI interrupt handling - nvmem driver updates - other smaller driver updates and cleanups, full details in the shortlog All of these have been in linux-next for a long time with no reported issue, other than a build warning for the speakup driver" The build warning hits clang and is a gcc (and C23) extension, and is fixed up in the merge. Link: https://lore.kernel.org/all/20240321134831.GA2762840@dev-arch.thelio-3990X/ * tag 'char-misc-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (279 commits) binder: remove redundant variable page_addr uio_dmem_genirq: UIO_MEM_DMA_COHERENT conversion uio_pruss: UIO_MEM_DMA_COHERENT conversion cnic,bnx2,bnx2x: use UIO_MEM_DMA_COHERENT uio: introduce UIO_MEM_DMA_COHERENT type cdx: add MSI support for CDX bus pps: use cflags-y instead of EXTRA_CFLAGS speakup: Add /dev/synthu device speakup: Fix 8bit characters from direct synth parport: sunbpp: Convert to platform remove callback returning void parport: amiga: Convert to platform remove callback returning void char: xillybus: Convert to platform remove callback returning void vmw_balloon: change maintainership MAINTAINERS: change the maintainer for hpilo driver char: xilinx_hwicap: Fix NULL vs IS_ERR() bug hpet: remove hpets::hp_clocksource platform: goldfish: move the separate 'default' propery for CONFIG_GOLDFISH char: xilinx_hwicap: drop casting to void in dev_set_drvdata greybus: move is_gb_* functions out of greybus.h greybus: Remove usage of the deprecated ida_simple_xx() API ... -
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver updates from Greg KH: "Here is the big set of Staging driver cleanups for 6.9-rc1. Nothing major in here, lots of small coding style cleanups for most drivers, and the removal of some obsolete hardare (the emxx_udc and some drivers/staging/board/ files). All of these have been in linux-next for a long time with no reported issues" * tag 'staging-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (122 commits) staging: greybus: Replaces directive __attribute__((packed)) by __packed as suggested by checkpatch staging: greybus: Replace __attribute__((packed)) by __packed in various instances Staging: rtl8192e: Rename function GetHalfNmodeSupportByAPsHandler() Staging: rtl8192e: Rename function rtllib_FlushRxTsPendingPkts() Staging: rtl8192e: Rename goto OnADDBARsp_Reject Staging: rtl8192e: Rename goto OnADDBAReq_Fail Staging: rtl8192e: Rename function rtllib_send_ADDBARsp() Staging: rtl8192e: Rename function rtllib_send_ADDBAReq() Staging: rtl8192e: Rename variable TxRxSelect Staging: rtl8192e: Fix 5 chckpatch alignment warnings in rtl819x_BAProc.c Staging: rtl8192e: Rename function MgntQuery_MgntFrameTxRate Staging: rtl8192e: Rename boolean variable bHalfWirelessN24GMode Staging: rtl8192e: Rename reference AllowAllDestAddrHandler Staging: rtl8192e: Rename varoable asSta Staging: rtl8192e: Rename varoable osCcxVerNum Staging: rtl8192e: Rename variable CcxAironetBuf Staging: rtl8192e: Rename variable osCcxAironetIE Staging: rtl8192e: Rename variable AironetIeOui Staging: rtl8192e: Rename variable asRsn Staging: rtl8192e: Rename variable CcxVerNumBuf ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty / serial driver updates from Greg KH: "Here is the big set of TTY/Serial driver updates and cleanups for 6.9-rc1. Included in here are: - more tty cleanups from Jiri - loads of 8250 driver cleanups from Andy - max310x driver updates - samsung serial driver updates - uart_prepare_sysrq_char() updates for many drivers - platform driver remove callback void cleanups - stm32 driver updates - other small tty/serial driver updates All of these have been in linux-next for a long time with no reported issues" * tag 'tty-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits) dt-bindings: serial: stm32: add power-domains property serial: 8250_dw: Replace ACPI device check by a quirk serial: Lock console when calling into driver before registration serial: 8250_uniphier: Switch to use uart_read_port_properties() serial: 8250_tegra: Switch to use uart_read_port_properties() serial: 8250_pxa: Switch to use uart_read_port_properties() serial: 8250_omap: Switch to use uart_read_port_properties() serial: 8250_of: Switch to use uart_read_port_properties() serial: 8250_lpc18xx: Switch to use uart_read_port_properties() serial: 8250_ingenic: Switch to use uart_read_port_properties() serial: 8250_dw: Switch to use uart_read_port_properties() serial: 8250_bcm7271: Switch to use uart_read_port_properties() serial: 8250_bcm2835aux: Switch to use uart_read_port_properties() serial: 8250_aspeed_vuart: Switch to use uart_read_port_properties() serial: port: Introduce a common helper to read properties serial: core: Add UPIO_UNKNOWN constant for unknown port type serial: core: Move struct uart_port::quirks closer to possible values serial: sh-sci: Call sci_serial_{in,out}() directly serial: core: only stop transmit when HW fifo is empty serial: pch: Use uart_prepare_sysrq_char(). ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt changes for 6.9-rc1. Lots of tiny changes and forward progress to support new hardware and better support for existing devices. Included in here are: - Thunderbolt (i.e. USB4) updates for newer hardware and uses as more people start to use the hardware - default USB authentication mode Kconfig and documentation update to make it more obvious what is going on - USB typec updates and enhancements - usual dwc3 driver updates - usual xhci driver updates - function USB (i.e. gadget) driver updates and additions - new device ids for lots of drivers - loads of other small updates, full details in the shortlog All of these, including a "last minute regression fix" have been in linux-next with no reported issues" * tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (185 commits) usb: usb-acpi: Fix oops due to freeing uninitialized pld pointer usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin usb: gadget: tegra-xudc: Fix USB3 PHY retrieval logic phy: tegra: xusb: Add API to retrieve the port number of phy USB: gadget: pxa27x_udc: Remove unused of_gpio.h usb: gadget/snps_udc_plat: Remove unused of_gpio.h usb: ohci-pxa27x: Remove unused of_gpio.h usb: sl811-hcd: only defined function checkdone if QUIRK2 is defined usb: Clarify expected behavior of dev_bin_attrs_are_visible() xhci: Allow RPM on the USB controller (1022:43f7) by default usb: isp1760: remove SLAB_MEM_SPREAD flag usage usb: misc: onboard_hub: use pointer consistently in the probe function usb: gadget: fsl: Increase size of name buffer for endpoints usb: gadget: fsl: Add of device table to enable module autoloading usb: typec: tcpm: add support to set tcpc connector orientatition usb: typec: tcpci: add generic tcpci fallback compatible dt-bindings: usb: typec-tcpci: add tcpci fallback binding usb: gadget: fsl-udc: Replace custom log wrappers by dev_{err,warn,dbg,vdbg} usb: core: Set connect_type of ports based on DT node dt-bindings: usb: Add downstream facing ports to realtek binding ... -
Arnaldo Carvalho de Melo authored
Since its going directly to the syscall to avoid not having memfd_create() available in some systems, do the same for its MFD_CLOEXEC flags, defining it if not available. This fixes the build in those systems, noticed while building perf on a set of build containers. Fixes: 9fa5e1a1 ("libbpf: Call memfd_create() syscall directly") Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/ZfxZ9nCyKvwmpKkE@x1
-
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linuxLinus Torvalds authored
Pull hwspinlock updates from Bjorn Andersson: "Some code cleanup for the OMAP hwspinlock driver" * tag 'hwlock-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: hwspinlock: omap: Use index to get hwspinlock pointer hwspinlock: omap: Use devm_hwspin_lock_register() helper hwspinlock: omap: Use devm_pm_runtime_enable() helper hwspinlock: omap: Remove unneeded check for OF node
-
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linuxLinus Torvalds authored
Pull rpmsg updates from Bjorn Andersson: "This transitions rpmsg_ctrl and rpmsg_char drivers away from the deprecated ida_simple_*() API. It also makes the rpmsg_bus const" * tag 'rpmsg-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: rpmsg: core: Make rpmsg_bus const rpmsg: Remove usage of the deprecated ida_simple_xx() API
-
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linuxLinus Torvalds authored
Pull remoteproc updates from Bjorn Andersson: "Qualcomm SM8650 audio, compute and modem remoteproc are added. Qualcomm X1 Elite audio and compute remoteprocs are added, after support for shutting down the bootloader-loaded firmware loaded into the audio DSP.. A dozen drivers in the subsystem are transitioned to use devres helpers for remoteproc and memory allocations - this makes it possible to acquire in-kernel handle to individual remoteproc instances in a cluster. The release of DMA memory for remoteproc virtio is corrected to ensure that restarting due to a watchdog bite doesn't attempt to allocate the memory again without first freeing it. Last, but not least, a couple of DeviceTree binding cleanups" * tag 'rproc-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (30 commits) remoteproc: qcom_q6v5_pas: Unload lite firmware on ADSP remoteproc: qcom_q6v5_pas: Add support for X1E80100 ADSP/CDSP dt-bindings: remoteproc: qcom,sm8550-pas: document the X1E80100 aDSP & cDSP remoteproc: qcom_wcnss: Use devm_rproc_alloc() helper remoteproc: qcom_q6v5_wcss: Use devm_rproc_alloc() helper remoteproc: qcom_q6v5_pas: Use devm_rproc_alloc() helper remoteproc: qcom_q6v5_mss: Use devm_rproc_alloc() helper remoteproc: qcom_q6v5_adsp: Use devm_rproc_alloc() helper dt-bindings: remoteproc: do not override firmware-name $ref dt-bindings: remoteproc: qcom,glink-rpm-edge: drop redundant type from label remoteproc: qcom: pas: correct data indentation remoteproc: Make rproc_get_by_phandle() work for clusters remoteproc: qcom: pas: Add SM8650 remoteproc support remoteproc: qcom: pas: make region assign more generic dt-bindings: remoteproc: qcom,sm8550-pas: document the SM8650 PAS remoteproc: k3-dsp: Use devm_rproc_add() helper remoteproc: k3-dsp: Use devm_ioremap_wc() helper remoteproc: k3-dsp: Add devm action to release tsp remoteproc: k3-dsp: Use devm_kzalloc() helper remoteproc: k3-dsp: Use devm_ti_sci_get_by_phandle() helper ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linuxLinus Torvalds authored
Pull coccinelle update from Julia Lawall: "Simplify the device_attr_show semantic patch Also removes an unused variable warning" * tag 'cocci-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux: coccinelle: device_attr_show: Remove useless expression STR
-
git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linuxLinus Torvalds authored
Pull sh updates from John Paul Adrian Glaubitz: "Two patches by Ricardo B. Marliere make two instances of struct bus_type in the interrupt controller driver and the DMA sysfs interface const since the driver core in the kernel is now able to handle that. A third patch by Artur Rojek enforces internal linkage for the function setup_hd64461() in order to fix the build of hp6xx_defconfig with -Werror=missing-prototypes" * tag 'sh-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux: sh: hd64461: Make setup_hd64461() static sh: intc: Make intc_subsys const sh: dma-sysfs: Make dma_subsys const
-
Linus Torvalds authored
Merge tag 'hyperv-next-signed-20240320' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv updates from Wei Liu: - Use Hyper-V entropy to seed guest random number generator (Michael Kelley) - Convert to platform remove callback returning void for vmbus (Uwe Kleine-König) - Introduce hv_get_hypervisor_version function (Nuno Das Neves) - Rename some HV_REGISTER_* defines for consistency (Nuno Das Neves) - Change prefix of generic HV_REGISTER_* MSRs to HV_MSR_* (Nuno Das Neves) - Cosmetic changes for hv_spinlock.c (Purna Pavan Chandra Aekkaladevi) - Use per cpu initial stack for vtl context (Saurabh Sengar) * tag 'hyperv-next-signed-20240320' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: x86/hyperv: Use Hyper-V entropy to seed guest random number generator x86/hyperv: Cosmetic changes for hv_spinlock.c hyperv-tlfs: Rename some HV_REGISTER_* defines for consistency hv: vmbus: Convert to platform remove callback returning void mshyperv: Introduce hv_get_hypervisor_version function x86/hyperv: Use per cpu initial stack for vtl context hyperv-tlfs: Change prefix of generic HV_REGISTER_* MSRs to HV_MSR_*
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fix from David Sterba: "Fix a problem found in 6.7 after adding the temp-fsid feature which changed device tracking in memory and broke grub-probe. This is used on initrd-less systems. There were several iterations of the fix and it took longer than expected" * tag 'for-6.9-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: do not skip re-registration for the mounted device
-
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfatLinus Torvalds authored
Pull exfat updates from Namjae Jeon: - Improve dirsync performance by syncing on a dentry-set rather than on a per-directory entry * tag 'exfat-for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat: exfat: remove duplicate update parent dir exfat: do not sync parent dir if just update timestamp exfat: remove unused functions exfat: convert exfat_find_empty_entry() to use dentry cache exfat: convert exfat_init_ext_entry() to use dentry cache exfat: move free cluster out of exfat_init_ext_entry() exfat: convert exfat_remove_entries() to use dentry cache exfat: convert exfat_add_entry() to use dentry cache exfat: add exfat_get_empty_dentry_set() helper exfat: add __exfat_get_dentry_set() helper
-
https://github.com/norov/linuxLinus Torvalds authored
Pull bitmap updates from Yury Norov: "A couple of random cleanups plus a step-down patch from Andy" * tag 'bitmap-for-6.9' of https://github.com/norov/linux: bitmap: Step down as a reviewer lib/find: optimize find_*_bit_wrap lib/find_bit: Fix the code comments about find_next_bit_wrap
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfPaolo Abeni authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net. There is a larger batch of fixes still pending that will follow up asap, this is what I deemed to be more urgent at this time: 1) Use clone view in pipapo set backend to release elements from destroy path, otherwise it is possible to destroy elements twice. 2) Incorrect check for internal table flags lead to bogus transaction objects. 3) Fix counters memleak in netdev basechain update error path, from Quan Tian. netfilter pull request 24-03-21 * tag 'nf-24-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: Fix a memory leak in nf_tables_updchain netfilter: nf_tables: do not compare internal table flags on updates netfilter: nft_set_pipapo: release elements in clone only from destroy path ==================== Link: https://lore.kernel.org/r/20240321112117.36737-1-pablo@netfilter.orgSigned-off-by:
-
Takashi Sakamoto authored
In the case of firewire core function, the caller of show functions for device attributes is not only sysfs user, but also device initialization. This commit adds memo about it against the typical assumption that the functions are just dedicated to sysfs user. Link: https://lore.kernel.org/lkml/20240318091759.678326-1-o-takashi@sakamocchi.jp/Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp>
-
