- 28 May, 2024 8 commits
-
-
Matthieu Baerts (NGI0) authored
These tests are rarely unstable. It depends on the CI running the tests, especially if it is also busy doing other tasks in parallel, and if a debug kernel config is being used. It looks like this issue is sometimes present with the NetDev CI. While this is being investigated, the tests are marked as flaky not to create noises on such CIs. Fixes: b6e074e1 ("selftests: mptcp: add infinite map testcase") Link: https://github.com/multipath-tcp/mptcp_net-next/issues/491Reviewed-by:
Mat Martineau <martineau@kernel.org> Signed-off-by:
Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://lore.kernel.org/r/20240524-upstream-net-20240524-selftests-mptcp-flaky-v1-4-a352362f3f8e@kernel.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Matthieu Baerts (NGI0) authored
These tests are flaky since their introduction. This might be less or not visible depending on the CI running the tests, especially if it is also busy doing other tasks in parallel, and if a debug kernel config is being used. It looks like this issue is often present with the NetDev CI. While this is being investigated, the tests are marked as flaky not to create noises on such CIs. Fixes: 01542c9b ("selftests: mptcp: add fastclose testcase") Link: https://github.com/multipath-tcp/mptcp_net-next/issues/324Reviewed-by:
-
Matthieu Baerts (NGI0) authored
These tests are flaky since their introduction. This might be less or not visible depending on the CI running the tests, especially if it is also busy doing other tasks in parallel. A first analysis shown that the transfer can be slowed down when there are some re-injections at the MPTCP level. Such re-injections can of course happen, and disturb the transfer, but it looks strange to have them in this lab. That could be caused by the kernel having access to less CPU cycles -- e.g. when other activities are executed in parallel -- or by a misinterpretation on the MPTCP packet scheduler side. While this is being investigated, the tests are marked as flaky not to create noises in other CIs. Fixes: 219d0499 ("mptcp: push pending frames when subflow has free space") Link: https://github.com/multipath-tcp/mptcp_net-next/issues/475Reviewed-by:
-
Matthieu Baerts (NGI0) authored
Some subtests can be unstable, failing once every X runs. Fixing them can take time: there could be an issue in the kernel or in the subtest, and it is then important to do a proper analysis, not to hide real bugs. To avoid creating noises on the different CIs, it is important to have a simple way to mark subtests as flaky, and ignore the errors. This is what this patch introduces: subtests can be marked as flaky by setting MPTCP_LIB_SUBTEST_FLAKY env var to 1, e.g. MPTCP_LIB_SUBTEST_FLAKY=1 <run flaky subtest> The subtest will be executed, and errors (if any) will be ignored. It is still good to run these subtests, as it exercises code, and the results can still be useful for the on-going investigations. Note that the MPTCP CI will continue to track these flaky subtests by setting SELFTESTS_MPTCP_LIB_OVERRIDE_FLAKY env var to 1, and a ticket has to be created before marking subtests as flaky. Reviewed-by:
-
Jakub Kicinski authored
Jacob Keller says: ==================== Intel Wired LAN Driver Updates 2024-05-23 (ice, idpf) This series contains two fixes which finished up testing. First, Alexander fixes an issue in idpf caused by enabling NAPI and interrupts prior to actually allocating the Rx buffers. Second, Jacob fixes the ice driver VSI VLAN counting logic to ensure that addition and deletion of VLANs properly manages the total VSI count. ==================== Link: https://lore.kernel.org/r/20240523-net-2024-05-23-intel-net-fixes-v1-0-17a923e0bb5f@intel.comSigned-off-by:
-
Jacob Keller authored
The ice_vsi_add_vlan() function is used to add a VLAN filter for the target VSI. This function prepares a filter in the switch table for the given VSI. If it succeeds, the vsi->num_vlan counter is incremented. It is not considered an error to add a VLAN which already exists in the switch table, so the function explicitly checks and ignores -EEXIST. The vsi->num_vlan counter is still incremented. This seems incorrect, as it means we can double-count in the case where the same VLAN is added twice by the caller. The actual table will have one less filter than the count. The ice_vsi_del_vlan() function similarly checks and handles the -ENOENT condition for when deleting a filter that doesn't exist. This flow only decrements the vsi->num_vlan if it actually deleted a filter. The vsi->num_vlan counter is used only in a few places, primarily related to tracking the number of non-zero VLANs. If the vsi->num_vlans gets out of sync, then ice_vsi_num_non_zero_vlans() will incorrectly report more VLANs than are present, and ice_vsi_has_non_zero_vlans() could return true potentially in cases where there are only VLAN 0 filters left. Fix this by only incrementing the vsi->num_vlan in the case where we actually added an entry, and not in the case where the entry already existed. Fixes: a1ffafb0 ("ice: Support configuring the device to Double VLAN Mode") Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240523-net-2024-05-23-intel-net-fixes-v1-2-17a923e0bb5f@intel.comSigned-off-by:
-
Alexander Lobakin authored
Currently, idpf enables NAPI and interrupts prior to allocating Rx buffers. This may lead to frame loss (there are no buffers to place incoming frames) and even crashes on quick ifup-ifdown. Interrupts must be enabled only after all the resources are here and available. Split interrupt init into two phases: initialization and enabling, and perform the second only after the queues are fully initialized. Note that we can't just move interrupt initialization down the init process, as the queues must have correct a ::q_vector pointer set and NAPI already added in order to allocate buffers correctly. Also, during the deinit process, disable HW interrupts first and only then disable NAPI. Otherwise, there can be a HW event leading to napi_schedule(), but the NAPI will already be unavailable. Fixes: d4d55871 ("idpf: initialize interrupts and enable vport") Reported-by:
Michal Kubiak <michal.kubiak@intel.com> Reviewed-by:
Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by:
Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by:
Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by:
-
Alexander Lobakin authored
After the tagged commit, @netdev got documented twice and the kdoc script didn't notice that. Remove the second description added later and move the initial one according to the field position. After merging commit 5f8e4007 ("kernel-doc: fix struct_group_tagged() parsing"), kdoc requires to describe struct groups as well. &page_pool_params has 2 struct groups which generated new warnings, describe them to resolve this. Fixes: 403f11ac ("page_pool: don't use driver-set flags field directly") Signed-off-by:
-
- 27 May, 2024 17 commits
-
-
Horatiu Vultur authored
When the interrupt is enabled, the function lan8841_config_intr tries to clear any pending interrupts by reading the interrupt status, then checks the return value for errors and then continue to enable the interrupt. It has been seen that once the system gets out of sleep mode, the interrupt status has the value 0x400 meaning that the PHY detected that the link was in low power. That is correct value but the problem is that the check is wrong. We try to check for errors but we return an error also in this case which is not an error. Therefore fix this by returning only when there is an error. Fixes: a8f1a19d ("net: micrel: Add support for lan8841 PHY") Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by:
Suman Ghosh <sumang@marvell.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20240524085350.359812-1-horatiu.vultur@microchip.comSigned-off-by:
-
Xiaolei Wang authored
When fec_probe() fails or fec_drv_remove() needs to release the fec queue and remove a NAPI context, therefore add a function corresponding to fec_enet_init() and call fec_enet_deinit() which does the opposite to release memory and remove a NAPI context. Fixes: 59d0f746 ("net: fec: init multi queue date structure") Signed-off-by:
Xiaolei Wang <xiaolei.wang@windriver.com> Reviewed-by:
Wei Fang <wei.fang@nxp.com> Reviewed-by:
-
Rob Herring (Arm) authored
The child nodes are missing "additionalProperties" constraints which means any undocumented properties or child nodes are allowed. Add the constraints and all the undocumented properties exposed by the fix. Fixes: f562202f ("dt-bindings: net: pse-pd: Add bindings for TPS23881 PSE controller") Signed-off-by:
Rob Herring (Arm) <robh@kernel.org> Acked-by:
Kory Maincent <kory.maincent@bootlin.com> Link: https://lore.kernel.org/r/20240523171750.2837331-1-robh@kernel.orgSigned-off-by:
-
Rob Herring (Arm) authored
The child nodes are missing "additionalProperties" constraints which means any undocumented properties or child nodes are allowed. Add the constraints, and fix the fallout of wrong manager node regex and missing properties. Fixes: 9c1de033 ("dt-bindings: net: pse-pd: Add bindings for PD692x0 PSE controller") Signed-off-by:
-
Eric Dumazet authored
Jason commit made checks against ACK sequence less strict and can be exploited by attackers to establish spoofed flows with less probes. Innocent users might use tcp_rmem[1] == 1,000,000,000, or something more reasonable. An attacker can use a regular TCP connection to learn the server initial tp->rcv_wnd, and use it to optimize the attack. If we make sure that only the announced window (smaller than 65535) is used for ACK validation, we force an attacker to use 65537 packets to complete the 3WHS (assuming server ISN is unknown) Fixes: 378979e9 ("tcp: remove 64 KByte limit for initial tp->rcv_wnd value") Link: https://datatracker.ietf.org/meeting/119/materials/slides-119-tcpm-ghost-acks-00Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Reviewed-by:
Jason Xing <kerneljasonxing@gmail.com> Link: https://lore.kernel.org/r/20240523130528.60376-1-edumazet@google.comSigned-off-by:
-
Willem de Bruijn authored
Syzkaller was able to trigger kernel BUG at net/core/gro.c:424 ! RIP: 0010:gro_pull_from_frag0 net/core/gro.c:424 [inline] RIP: 0010:gro_try_pull_from_frag0 net/core/gro.c:446 [inline] RIP: 0010:dev_gro_receive+0x242f/0x24b0 net/core/gro.c:571 Due to using an incorrect NAPI_GRO_CB(skb)->network_offset. The referenced commit sets this offset to 0 in skb_gro_reset_offset. That matches the expected case in dev_gro_receive: pp = INDIRECT_CALL_INET(ptype->callbacks.gro_receive, ipv6_gro_receive, inet_gro_receive, &gro_list->list, skb); But syzkaller injected an skb with protocol ETH_P_TEB into an ip6gre device (by writing the IP6GRE encapsulated version to a TAP device). The result was a first call to eth_gro_receive, and thus an extra ETH_HLEN in network_offset that should not be there. First issue hit is when computing offset from network header in ipv6_gro_pull_exthdrs. Initialize both offsets in the network layer gro_receive. This pairs with all reads in gro_receive, which use skb_gro_receive_network_offset(). Fixes: 186b1ea7 ("net: gro: use cb instead of skb->network_header") Reported-by:syzkaller <syzkaller@googlegroups.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> CC: Richard Gobert <richardbgobert@gmail.com> Reviewed-by:
-
Ido Schimmel authored
Cited commit started returning an error when user space requests to dump the interface's IPv4 addresses and IPv4 is disabled on the interface. Restore the previous behavior and do not return an error. Before cited commit: # ip address show dev dummy1 10: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 link/ether e2:40:68:98:d0:18 brd ff:ff:ff:ff:ff:ff inet6 fe80::e040:68ff:fe98:d018/64 scope link proto kernel_ll valid_lft forever preferred_lft forever # ip link set dev dummy1 mtu 67 # ip address show dev dummy1 10: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 67 qdisc noqueue state UNKNOWN group default qlen 1000 link/ether e2:40:68:98:d0:18 brd ff:ff:ff:ff:ff:ff After cited commit: # ip address show dev dummy1 10: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 link/ether 32:2d:69:f2:9c:99 brd ff:ff:ff:ff:ff:ff inet6 fe80::302d:69ff:fef2:9c99/64 scope link proto kernel_ll valid_lft forever preferred_lft forever # ip link set dev dummy1 mtu 67 # ip address show dev dummy1 RTNETLINK answers: No such device Dump terminated With this patch: # ip address show dev dummy1 10: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 link/ether de:17:56:bb:57:c0 brd ff:ff:ff:ff:ff:ff inet6 fe80::dc17:56ff:febb:57c0/64 scope link proto kernel_ll valid_lft forever preferred_lft forever # ip link set dev dummy1 mtu 67 # ip address show dev dummy1 10: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 67 qdisc noqueue state UNKNOWN group default qlen 1000 link/ether de:17:56:bb:57:c0 brd ff:ff:ff:ff:ff:ff I fixed the exact same issue for IPv6 in commit c04f7dfe ("ipv6: Fix address dump when IPv6 is disabled on an interface"), but noted [1] that I am not doing the change for IPv4 because I am not aware of a way to disable IPv4 on an interface other than unregistering it. I clearly missed the above case. [1] https://lore.kernel.org/netdev/20240321173042.2151756-1-idosch@nvidia.com/ Fixes: cdb2f80f ("inet: use xa_array iterator to implement inet_dump_ifaddr()") Reported-by:Carolina Jubran <cjubran@nvidia.com> Reported-by:
Yamen Safadi <ysafadi@nvidia.com> Tested-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240523110257.334315-1-idosch@nvidia.comSigned-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf 2024-05-27 We've added 15 non-merge commits during the last 7 day(s) which contain a total of 18 files changed, 583 insertions(+), 55 deletions(-). The main changes are: 1) Fix broken BPF multi-uprobe PID filtering logic which filtered by thread while the promise was to filter by process, from Andrii Nakryiko. 2) Fix the recent influx of syzkaller reports to sockmap which triggered a locking rule violation by performing a map_delete, from Jakub Sitnicki. 3) Fixes to netkit driver in particular on skb->pkt_type override upon pass verdict, from Daniel Borkmann. 4) Fix an integer overflow in resolve_btfids which can wrongly trigger build failures, from Friedrich Vock. 5) Follow-up fixes for ARC JIT reported by static analyzers, from Shahab Vahedi. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: selftests/bpf: Cover verifier checks for mutating sockmap/sockhash Revert "bpf, sockmap: Prevent lock inversion deadlock in map delete elem" bpf: Allow delete from sockmap/sockhash only if update is allowed selftests/bpf: Add netkit test for pkt_type selftests/bpf: Add netkit tests for mac address netkit: Fix pkt_type override upon netkit pass verdict netkit: Fix setting mac address in l2 mode ARC, bpf: Fix issues reported by the static analyzers selftests/bpf: extend multi-uprobe tests with USDTs selftests/bpf: extend multi-uprobe tests with child thread case libbpf: detect broken PID filtering logic for multi-uprobe bpf: remove unnecessary rcu_read_{lock,unlock}() in multi-uprobe attach logic bpf: fix multi-uprobe PID filtering logic bpf: Fix potential integer overflow in resolve_btfids MAINTAINERS: Add myself as reviewer of ARM64 BPF JIT ==================== Link: https://lore.kernel.org/r/20240527203551.29712-1-daniel@iogearbox.netSigned-off-by:
-
Jakub Sitnicki authored
Verifier enforces that only certain program types can mutate sock{map,hash} maps, that is update it or delete from it. Add test coverage for these checks so we don't regress. Signed-off-by:Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20240527-sockmap-verify-deletes-v1-3-944b372f2101@cloudflare.com
-
Jakub Sitnicki authored
This reverts commit ff910599. This check is no longer needed. BPF programs attached to tracepoints are now rejected by the verifier when they attempt to delete from a sockmap/sockhash maps. Signed-off-by:
-
Jakub Sitnicki authored
We have seen an influx of syzkaller reports where a BPF program attached to a tracepoint triggers a locking rule violation by performing a map_delete on a sockmap/sockhash. We don't intend to support this artificial use scenario. Extend the existing verifier allowed-program-type check for updating sockmap/sockhash to also cover deleting from a map. From now on only BPF programs which were previously allowed to update sockmap/sockhash can delete from these map types. Fixes: ff910599 ("bpf, sockmap: Prevent lock inversion deadlock in map delete elem") Reported-by:
Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Reported-by: syzbot+ec941d6e24f633a59172@syzkaller.appspotmail.com Signed-off-by:
-
Parthiban Veerasooran authored
LED Select (LED_SEL) bit in the LED General Purpose IO Configuration register is used to determine the functionality of external LED pins (Speed Indicator, Link and Activity Indicator, Full Duplex Link Indicator). The default value for this bit is 0 when no EEPROM is present. If a EEPROM is present, the default value is the value of the LED Select bit in the Configuration Flags of the EEPROM. A USB Reset or Lite Reset (LRST) will cause this bit to be restored to the image value last loaded from EEPROM, or to be set to 0 if no EEPROM is present. While configuring the dual purpose GPIO/LED pins to LED outputs in the LED General Purpose IO Configuration register, the LED_SEL bit is changed as 0 and resulting the configured value from the EEPROM is cleared. The issue is fixed by using read-modify-write approach. Fixes: f293501c ("smsc95xx: configure LED outputs") Signed-off-by:
Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com> Reviewed-by:
Woojung Huh <woojung.huh@microchip.com> Link: https://lore.kernel.org/r/20240523085314.167650-1-Parthiban.Veerasooran@microchip.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Hariprasad Kelam authored
There are two type of classes. "Leaf classes" that are the bottom of the class hierarchy. "Inner classes" that are neither the root class nor leaf classes. QoS rules can only specify leaf classes as targets for traffic. Root / \ / \ 1 2 /\ / \ 4 5 classes 1,4 and 5 are leaf classes. class 2 is a inner class. When a leaf class made as inner, or vice versa, resources associated with send queue (send queue buffers and transmit schedulers) are not getting freed. Fixes: 5e6808b4 ("octeontx2-pf: Add support for HTB offload") Signed-off-by:Hariprasad Kelam <hkelam@marvell.com> Link: https://lore.kernel.org/r/20240523073626.4114-1-hkelam@marvell.comSigned-off-by:
-
Kuniyuki Iwashima authored
syzkaller reported data-race of sk->sk_hash in unix_autobind() [0], and the same ones exist in unix_bind_bsd() and unix_bind_abstract(). The three bind() functions prefetch sk->sk_hash locklessly and use it later after validating that unix_sk(sk)->addr is NULL under unix_sk(sk)->bindlock. The prefetched sk->sk_hash is the hash value of unbound socket set in unix_create1() and does not change until bind() completes. There could be a chance that sk->sk_hash changes after the lockless read. However, in such a case, non-NULL unix_sk(sk)->addr is visible under unix_sk(sk)->bindlock, and bind() returns -EINVAL without using the prefetched value. The KCSAN splat is false-positive, but let's silence it by reading sk->sk_hash under unix_sk(sk)->bindlock. [0]: BUG: KCSAN: data-race in unix_autobind / unix_autobind write to 0xffff888034a9fb88 of 4 bytes by task 4468 on cpu 0: __unix_set_addr_hash net/unix/af_unix.c:331 [inline] unix_autobind+0x47a/0x7d0 net/unix/af_unix.c:1185 unix_dgram_connect+0x7e3/0x890 net/unix/af_unix.c:1373 __sys_connect_file+0xd7/0xe0 net/socket.c:2048 __sys_connect+0x114/0x140 net/socket.c:2065 __do_sys_connect net/socket.c:2075 [inline] __se_sys_connect net/socket.c:2072 [inline] __x64_sys_connect+0x40/0x50 net/socket.c:2072 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x4f/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x46/0x4e read to 0xffff888034a9fb88 of 4 bytes by task 4465 on cpu 1: unix_autobind+0x28/0x7d0 net/unix/af_unix.c:1134 unix_dgram_connect+0x7e3/0x890 net/unix/af_unix.c:1373 __sys_connect_file+0xd7/0xe0 net/socket.c:2048 __sys_connect+0x114/0x140 net/socket.c:2065 __do_sys_connect net/socket.c:2075 [inline] __se_sys_connect net/socket.c:2072 [inline] __x64_sys_connect+0x40/0x50 net/socket.c:2072 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x4f/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x46/0x4e value changed: 0x000000e4 -> 0x000001e3 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 4465 Comm: syz-executor.0 Not tainted 6.8.0-12822-gcd51db110a7e #12 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Fixes: afd20b92 ("af_unix: Replace the big lock with small locks.") Reported-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20240522154218.78088-1-kuniyu@amazon.comSigned-off-by:
-
Kuniyuki Iwashima authored
Once unix_sk(sk)->addr is assigned under net->unx.table.locks and unix_sk(sk)->bindlock, *(unix_sk(sk)->addr) and unix_sk(sk)->path are fully set up, and unix_sk(sk)->addr is never changed. unix_getname() and unix_copy_addr() access the two fields locklessly, and commit ae3b5641 ("missing barriers in some of unix_sock ->addr and ->path accesses") added smp_store_release() and smp_load_acquire() pairs. In other functions, we still read unix_sk(sk)->addr locklessly to check if the socket is bound, and KCSAN complains about it. [0] Given these functions have no dependency for *(unix_sk(sk)->addr) and unix_sk(sk)->path, READ_ONCE() is enough to annotate the data-race. Note that it is safe to access unix_sk(sk)->addr locklessly if the socket is found in the hash table. For example, the lockless read of otheru->addr in unix_stream_connect() is safe. Note also that newu->addr there is of the child socket that is still not accessible from userspace, and smp_store_release() publishes the address in case the socket is accept()ed and unix_getname() / unix_copy_addr() is called. [0]: BUG: KCSAN: data-race in unix_bind / unix_listen write (marked) to 0xffff88805f8d1840 of 8 bytes by task 13723 on cpu 0: __unix_set_addr_hash net/unix/af_unix.c:329 [inline] unix_bind_bsd net/unix/af_unix.c:1241 [inline] unix_bind+0x881/0x1000 net/unix/af_unix.c:1319 __sys_bind+0x194/0x1e0 net/socket.c:1847 __do_sys_bind net/socket.c:1858 [inline] __se_sys_bind net/socket.c:1856 [inline] __x64_sys_bind+0x40/0x50 net/socket.c:1856 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x4f/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x46/0x4e read to 0xffff88805f8d1840 of 8 bytes by task 13724 on cpu 1: unix_listen+0x72/0x180 net/unix/af_unix.c:734 __sys_listen+0xdc/0x160 net/socket.c:1881 __do_sys_listen net/socket.c:1890 [inline] __se_sys_listen net/socket.c:1888 [inline] __x64_sys_listen+0x2e/0x40 net/socket.c:1888 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x4f/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x46/0x4e value changed: 0x0000000000000000 -> 0xffff88807b5b1b40 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 13724 Comm: syz-executor.4 Not tainted 6.8.0-12822-gcd51db110a7e #12 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by:
-
Geliang Tang authored
The hsr_ping test reports the following errors: INFO: preparing interfaces for HSRv0. INFO: Initial validation ping. INFO: Longer ping test. INFO: Cutting one link. INFO: Delay the link and drop a few packages. INFO: All good. INFO: preparing interfaces for HSRv1. RTNETLINK answers: File exists RTNETLINK answers: File exists RTNETLINK answers: File exists RTNETLINK answers: File exists RTNETLINK answers: File exists RTNETLINK answers: File exists Error: ipv4: Address already assigned. Error: ipv6: address already assigned. Error: ipv4: Address already assigned. Error: ipv6: address already assigned. Error: ipv4: Address already assigned. Error: ipv6: address already assigned. INFO: Initial validation ping. That is because the cleanup code for the 2nd round test before "setup_hsr_interfaces 1" is removed incorrectly in commit 680fda4f ("test: hsr: Remove script code already implemented in lib.sh"). This patch fixes it by re-setup the namespaces using setup_ns ns1 ns2 ns3 command before "setup_hsr_interfaces 1". It deletes previous namespaces and create new ones. Fixes: 680fda4f ("test: hsr: Remove script code already implemented in lib.sh") Reviewed-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
Geliang Tang <tanggeliang@kylinos.cn> Link: https://lore.kernel.org/r/6485d3005f467758d49f0f313c8c009759ba6b05.1716374462.git.tanggeliang@kylinos.cnSigned-off-by:
-
Roded Zats authored
enic_set_vf_port assumes that the nl attribute IFLA_PORT_PROFILE is of length PORT_PROFILE_MAX and that the nl attributes IFLA_PORT_INSTANCE_UUID, IFLA_PORT_HOST_UUID are of length PORT_UUID_MAX. These attributes are validated (in the function do_setlink in rtnetlink.c) using the nla_policy ifla_port_policy. The policy defines IFLA_PORT_PROFILE as NLA_STRING, IFLA_PORT_INSTANCE_UUID as NLA_BINARY and IFLA_PORT_HOST_UUID as NLA_STRING. That means that the length validation using the policy is for the max size of the attributes and not on exact size so the length of these attributes might be less than the sizes that enic_set_vf_port expects. This might cause an out of bands read access in the memcpys of the data of these attributes in enic_set_vf_port. Fixes: f8bd9091 ("net: Add ndo_{set|get}_vf_port support for enic dynamic vnics") Signed-off-by:
Roded Zats <rzats@paloaltonetworks.com> Link: https://lore.kernel.org/r/20240522073044.33519-1-rzats@paloaltonetworks.comSigned-off-by:
-
- 25 May, 2024 11 commits
-
-
Daniel Borkmann authored
Add a test case to assert that the skb->pkt_type which was set from the BPF program is retained from the netkit xmit side to the peer's device at tcx ingress location. # ./vmtest.sh -- ./test_progs -t netkit [...] ./test_progs -t netkit [ 1.140780] bpf_testmod: loading out-of-tree module taints kernel. [ 1.141127] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel [ 1.284601] tsc: Refined TSC clocksource calibration: 3408.006 MHz [ 1.286672] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fd9b189d, max_idle_ns: 440795225691 ns [ 1.290384] clocksource: Switched to clocksource tsc #345 tc_netkit_basic:OK #346 tc_netkit_device:OK #347 tc_netkit_multi_links:OK #348 tc_netkit_multi_opts:OK #349 tc_netkit_neigh_links:OK #350 tc_netkit_pkt_type:OK Summary: 6/0 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Daniel Borkmann authored
This adds simple tests around setting MAC addresses in the different netkit modes. Signed-off-by:
-
Daniel Borkmann authored
When running Cilium connectivity test suite with netkit in L2 mode, we found that compared to tcx a few tests were failing which pushed traffic into an L7 proxy sitting in host namespace. The problem in particular is around the invocation of eth_type_trans() in netkit. In case of tcx, this is run before the tcx ingress is triggered inside host namespace and thus if the BPF program uses the bpf_skb_change_type() helper the newly set type is retained. However, in case of netkit, the late eth_type_trans() invocation overrides the earlier decision from the BPF program which eventually leads to the test failure. Instead of eth_type_trans(), split out the relevant parts, meaning, reset of mac header and call to eth_skb_pkt_type() before the BPF program is run in order to have the same behavior as with tcx, and refactor a small helper called eth_skb_pull_mac() which is run in case it's passed up the stack where the mac header must be pulled. With this all connectivity tests pass. Fixes: 35dfaad7 ("netkit, bpf: Add bpf programmable net device") Signed-off-by:
Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20240524163619.26001-2-daniel@iogearbox.netSigned-off-by:
-
Daniel Borkmann authored
When running Cilium connectivity test suite with netkit in L2 mode, we found that it is expected to be able to specify a custom MAC address for the devices, in particular, cilium-cni obtains the specified MAC address by querying the endpoint and sets the MAC address of the interface inside the Pod. Thus, fix the missing support in netkit for L2 mode. Fixes: 35dfaad7 ("netkit, bpf: Add bpf programmable net device") Signed-off-by:
Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/r/20240524163619.26001-1-daniel@iogearbox.netSigned-off-by:
-
Shahab Vahedi authored
Also updated couple of comments along the way. One of the issues reported was indeed a bug in the code: memset(ctx, 0, sizeof(ctx)) // original line memset(ctx, 0, sizeof(*ctx)) // fixed line That was a nice catch. Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202405222314.UG5F2NHn-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202405232036.Xqoc3b0J-lkp@intel.com/Signed-off-by:
Shahab Vahedi <shahab@synopsys.com> Link: https://lore.kernel.org/r/20240525035628.1026-1-list+bpf@vahedi.orgSigned-off-by:
-
Alexei Starovoitov authored
Andrii Nakryiko says: ==================== Fix BPF multi-uprobe PID filtering logic It turns out that current implementation of multi-uprobe PID filtering logic is broken. It filters by thread, while the promise is filtering by process. Patch #1 fixes the logic trivially. The rest is testing and mitigations that are necessary for libbpf to not break users of USDT programs. v1->v2: - fix selftest in last patch (CI); - use semicolon in patch #3 (Jiri). ==================== Link: https://lore.kernel.org/r/20240521163401.3005045-1-andrii@kernel.orgSigned-off-by:
-
Andrii Nakryiko authored
Validate libbpf's USDT-over-multi-uprobe logic by adding USDTs to existing multi-uprobe tests. This checks correct libbpf fallback to singular uprobes (when run on older kernels with buggy PID filtering). We reuse already established child process and child thread testing infrastructure, so additions are minimal. These test fail on either older kernels or older version of libbpf that doesn't detect PID filtering problems. Acked-by:
Jiri Olsa <jolsa@kernel.org> Signed-off-by:
Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20240521163401.3005045-6-andrii@kernel.orgSigned-off-by:
-
Andrii Nakryiko authored
Extend existing multi-uprobe tests to test that PID filtering works correctly. We already have child *process* tests, but we need also child *thread* tests. This patch adds spawn_thread() helper to start child thread, wait for it to be ready, and then instruct it to trigger desired uprobes. Additionally, we extend BPF-side code to track thread ID, not just process ID. Also we detect whether extraneous triggerings with unexpected process IDs happened, and validate that none of that happened in practice. These changes prove that fixed PID filtering logic for multi-uprobe works as expected. These tests fail on old kernels. Signed-off-by:
-
Andrii Nakryiko authored
Libbpf is automatically (and transparently to user) detecting multi-uprobe support in the kernel, and, if supported, uses multi-uprobes to improve USDT attachment speed. USDTs can be attached system-wide or for the specific process by PID. In the latter case, we rely on correct kernel logic of not triggering USDT for unrelated processes. As such, on older kernels that do support multi-uprobes, but still have broken PID filtering logic, we need to fall back to singular uprobes. Unfortunately, whether user is using PID filtering or not is known at the attachment time, which happens after relevant BPF programs were loaded into the kernel. Also unfortunately, we need to make a call whether to use multi-uprobes or singular uprobe for SEC("usdt") programs during BPF object load time, at which point we have no information about possible PID filtering. The distinction between single and multi-uprobes is small, but important for the kernel. Multi-uprobes get BPF_TRACE_UPROBE_MULTI attach type, and kernel internally substitiute different implementation of some of BPF helpers (e.g., bpf_get_attach_cookie()) depending on whether uprobe is multi or singular. So, multi-uprobes and singular uprobes cannot be intermixed. All the above implies that we have to make an early and conservative call about the use of multi-uprobes. And so this patch modifies libbpf's existing feature detector for multi-uprobe support to also check correct PID filtering. If PID filtering is not yet fixed, we fall back to singular uprobes for USDTs. This extension to feature detection is simple thanks to kernel's -EINVAL addition for pid < 0. Acked-by: -
Andrii Nakryiko authored
get_pid_task() internally already calls rcu_read_lock() and rcu_read_unlock(), so there is no point to do this one extra time. This is a drive-by improvement and has no correctness implications. Acked-by:
-
Andrii Nakryiko authored
Current implementation of PID filtering logic for multi-uprobes in uprobe_prog_run() is filtering down to exact *thread*, while the intent for PID filtering it to filter by *process* instead. The check in uprobe_prog_run() also differs from the analogous one in uprobe_multi_link_filter() for some reason. The latter is correct, checking task->mm, not the task itself. Fix the check in uprobe_prog_run() to perform the same task->mm check. While doing this, we also update get_pid_task() use to use PIDTYPE_TGID type of lookup, given the intent is to get a representative task of an entire process. This doesn't change behavior, but seems more logical. It would hold task group leader task now, not any random thread task. Last but not least, given multi-uprobe support is half-broken due to this PID filtering logic (depending on whether PID filtering is important or not), we need to make it easy for user space consumers (including libbpf) to easily detect whether PID filtering logic was already fixed. We do it here by adding an early check on passed pid parameter. If it's negative (and so has no chance of being a valid PID), we return -EINVAL. Previous behavior would eventually return -ESRCH ("No process found"), given there can't be any process with negative PID. This subtle change won't make any practical change in behavior, but will allow applications to detect PID filtering fixes easily. Libbpf fixes take advantage of this in the next patch. Cc: stable@vger.kernel.org Acked-by:
-
- 24 May, 2024 4 commits
-
-
Friedrich Vock authored
err is a 32-bit integer, but elf_update returns an off_t, which is 64-bit at least on 64-bit platforms. If symbols_patch is called on a binary between 2-4GB in size, the result will be negative when cast to a 32-bit integer, which the code assumes means an error occurred. This can wrongly trigger build failures when building very large kernel images. Fixes: fbbb68de ("bpf: Add resolve_btfids tool to resolve BTF IDs in ELF object") Signed-off-by:
Friedrich Vock <friedrich.vock@gmx.de> Signed-off-by:
-
David S. Miller authored
Tariq Toukan says: ==================== mlx5 fixes 24-05-22 This patchset provides bug fixes to mlx5 core and Eth drivers. Series generated against: commit 9c91c7fa ("net: mana: Fix the extra HZ in mana_hwc_send_request") ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Gal Pressman authored
When the skb is encapsulated, adjust the inner UDP header instead of the outer one, and account for UDP header (instead of TCP) in the inline header size calculation. Fixes: 689adf0d ("net/mlx5e: Add UDP GSO support") Reported-by:
Jason Baron <jbaron@akamai.com> Closes: https://lore.kernel.org/netdev/c42961cb-50b9-4a9a-bd43-87fe48d88d29@akamai.com/Signed-off-by:
Gal Pressman <gal@nvidia.com> Reviewed-by:
Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by:
Boris Pismenny <borisp@nvidia.com> Signed-off-by:
Tariq Toukan <tariqt@nvidia.com> Reviewed-by:
-
Carolina Jubran authored
Previously, the driver incorrectly used rx_dropped to report device buffer exhaustion. According to the documentation, rx_dropped should not be used to count packets dropped due to buffer exhaustion, which is the purpose of rx_missed_errors. Use rx_missed_errors as intended for counting packets dropped due to buffer exhaustion. Fixes: 269e6b3a ("net/mlx5e: Report additional error statistics in get stats ndo") Signed-off-by:
-
