- 09 Jan, 2014 40 commits
-
-
Jianguo Wu authored
commit 98398c32 upstream. In __page_check_address(), if address's pud is not present, huge_pte_offset() will return NULL, we should check the return value. Signed-off-by:
Jianguo Wu <wujianguo@huawei.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Mel Gorman <mgorman@suse.de> Cc: qiuxishi <qiuxishi@huawei.com> Cc: Hanjun Guo <guohanjun@huawei.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Joonsoo Kim authored
commit 6815bf3f upstream. update_pageblock_skip() only fits to compaction which tries to isolate by pageblock unit. If isolate_migratepages_range() is called by CMA, it try to isolate regardless of pageblock unit and it don't reference get_pageblock_skip() by ignore_skip_hint. We should also respect it on update_pageblock_skip() to prevent from setting the wrong information. Signed-off-by:
Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Reviewed-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by:
Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Christoph Lameter <cl@linux.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by:
-
Mel Gorman authored
commit af2c1401 upstream. According to documentation on barriers, stores issued before a LOCK can complete after the lock implying that it's possible tlb_flush_pending can be visible after a page table update. As per revised documentation, this patch adds a smp_mb__before_spinlock to guarantee the correct ordering. Signed-off-by:
Mel Gorman <mgorman@suse.de> Acked-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
-
Rik van Riel authored
commit 20841405 upstream. There are a few subtle races, between change_protection_range (used by mprotect and change_prot_numa) on one side, and NUMA page migration and compaction on the other side. The basic race is that there is a time window between when the PTE gets made non-present (PROT_NONE or NUMA), and the TLB is flushed. During that time, a CPU may continue writing to the page. This is fine most of the time, however compaction or the NUMA migration code may come in, and migrate the page away. When that happens, the CPU may continue writing, through the cached translation, to what is no longer the current memory location of the process. This only affects x86, which has a somewhat optimistic pte_accessible. All other architectures appear to be safe, and will either always flush, or flush whenever there is a valid mapping, even with no permissions (SPARC). The basic race looks like this: CPU A CPU B CPU C load TLB entry make entry PTE/PMD_NUMA fault on entry read/write old page start migrating page change PTE/PMD to new page read/write old page [*] flush TLB reload TLB from new entry read/write new page lose data [*] the old page may belong to a new user at this point! The obvious fix is to flush remote TLB entries, by making sure that pte_accessible aware of the fact that PROT_NONE and PROT_NUMA memory may still be accessible if there is a TLB flush pending for the mm. This should fix both NUMA migration and compaction. [mgorman@suse.de: fix build] Signed-off-by:
-
Oleg Nesterov authored
commit e0acd0a6 upstream. This is only theoretical, but after try_to_wake_up(p) was changed to check p->state under p->pi_lock the code like __set_current_state(TASK_INTERRUPTIBLE); schedule(); can miss a signal. This is the special case of wait-for-condition, it relies on try_to_wake_up/schedule interaction and thus it does not need mb() between __set_current_state() and if(signal_pending). However, this __set_current_state() can move into the critical section protected by rq->lock, now that try_to_wake_up() takes another lock we need to ensure that it can't be reordered with "if (signal_pending(current))" check inside that section. The patch is actually one-liner, it simply adds smp_wmb() before spin_lock_irq(rq->lock). This is what try_to_wake_up() already does by the same reason. We turn this wmb() into the new helper, smp_mb__before_spinlock(), for better documentation and to allow the architectures to change the default implementation. While at it, kill smp_mb__after_lock(), it has no callers. Perhaps we can also add smp_mb__before/after_spinunlock() for prepare_to_wait(). Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Acked-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Mel Gorman authored
commit eb4489f6 upstream. If a PMD changes during a THP migration then migration aborts but the failure path is doing more work than is necessary. Signed-off-by:
-
Mel Gorman authored
commit c3a489ca upstream. The anon_vma lock prevents parallel THP splits and any associated complexity that arises when handling splits during THP migration. This patch checks if the lock was successfully acquired and bails from THP migration if it failed for any reason. Signed-off-by:
-
Mel Gorman authored
commit 67f87463 upstream. On x86, PMD entries are similar to _PAGE_PROTNONE protection and are handled as NUMA hinting faults. The following two page table protection bits are what defines them _PAGE_NUMA:set _PAGE_PRESENT:clear A PMD is considered present if any of the _PAGE_PRESENT, _PAGE_PROTNONE, _PAGE_PSE or _PAGE_NUMA bits are set. If pmdp_invalidate encounters a pmd_numa, it clears the present bit leaving _PAGE_NUMA which will be considered not present by the CPU but present by pmd_present. The existing caller of pmdp_invalidate should handle it but it's an inconsistent state for a PMD. This patch keeps the state consistent when calling pmdp_invalidate. Signed-off-by:
-
Rob Herring authored
commit 13fcca8f upstream. This reverts commit e38c0a1f. Nikita Yushchenko reports: While trying to make freescale p2020ds and mpc8572ds boards working with mainline kernel, I faced that commit e38c0a1f (Handle Both these boards have uli1575 chip. Corresponding part in device tree is something like uli1575@0 { reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; #address-cells = <3>; ranges = <0x2000000 0x0 0x80000000 0x2000000 0x0 0x80000000 0x0 0x20000000 0x1000000 0x0 0x0 0x1000000 0x0 0x0 0x0 0x10000>; isa@1e { ... I.e. it has #address-cells = <3> With commit e38c0a1f reverted, devices under uli1575 are registered correctly, e.g. for rtc OF: ** translation for device /pcie@ffe09000/pcie@0/uli1575@0/isa@1e/rtc@70 ** OF: bus is isa (na=2, ns=1) on /pcie@ffe09000/pcie@0/uli1575@0/isa@1e OF: translating address: 00000001 00000070 OF: parent bus is default (na=3, ns=2) on /pcie@ffe09000/pcie@0/uli1575@0 OF: walking ranges... OF: ISA map, cp=0, s=1000, da=70 OF: parent translation for: 01000000 00000000 00000000 OF: with offset: 70 OF: one level translation: 00000000 00000000 00000070 OF: parent bus is pci (na=3, ns=2) on /pcie@ffe09000/pcie@0 OF: walking ranges... OF: default map, cp=a0000000, s=20000000, da=70 OF: default map, cp=0, s=10000, da=70 OF: parent translation for: 01000000 00000000 00000000 OF: with offset: 70 OF: one level translation: 01000000 00000000 00000070 OF: parent bus is pci (na=3, ns=2) on /pcie@ffe09000 OF: walking ranges... OF: PCI map, cp=0, s=10000, da=70 OF: parent translation for: 01000000 00000000 00000000 OF: with offset: 70 OF: one level translation: 01000000 00000000 00000070 OF: parent bus is default (na=2, ns=2) on / OF: walking ranges... OF: PCI map, cp=0, s=10000, da=70 OF: parent translation for: 00000000 ffc10000 OF: with offset: 70 OF: one level translation: 00000000 ffc10070 OF: reached root node With commit e38c0a1f in place, address translation fails: OF: ** translation for device /pcie@ffe09000/pcie@0/uli1575@0/isa@1e/rtc@70 ** OF: bus is isa (na=2, ns=1) on /pcie@ffe09000/pcie@0/uli1575@0/isa@1e OF: translating address: 00000001 00000070 OF: parent bus is default (na=3, ns=2) on /pcie@ffe09000/pcie@0/uli1575@0 OF: walking ranges... OF: ISA map, cp=0, s=1000, da=70 OF: parent translation for: 01000000 00000000 00000000 OF: with offset: 70 OF: one level translation: 00000000 00000000 00000070 OF: parent bus is pci (na=3, ns=2) on /pcie@ffe09000/pcie@0 OF: walking ranges... OF: default map, cp=a0000000, s=20000000, da=70 OF: default map, cp=0, s=10000, da=70 OF: not found ! Thierry Reding confirmed this commit was not needed after all: "We ended up merging a different address representation for Tegra PCIe and I've confirmed that reverting this commit doesn't cause any obvious regressions. I think all other drivers in drivers/pci/host ended up copying what we did on Tegra, so I wouldn't expect any other breakage either." There doesn't appear to be a simple way to support both behaviours, so reverting this as nothing should be depending on the new behaviour. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Rafael J. Wysocki authored
commit 98a947ab upstream. If pstate.current_pstate is 0 after the initial intel_pstate_get_cpu_pstates(), this means that we were unable to obtain any useful P-state information and there is no reason to continue, so free memory and return an error in that case. This fixes the following divide error occuring in a nested KVM guest: Intel P-state driver initializing. Intel pstate controlling: cpu 0 cpufreq: __cpufreq_add_dev: ->get() failed divide error: 0000 [#1] SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.13.0-0.rc4.git5.1.fc21.x86_64 #1 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff88001ea20000 ti: ffff88001e9bc000 task.ti: ffff88001e9bc000 RIP: 0010:[<ffffffff815c551d>] [<ffffffff815c551d>] intel_pstate_timer_func+0x11d/0x2b0 RSP: 0000:ffff88001ee03e18 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88001a454348 RCX: 0000000000006100 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff88001ee03e38 R08: 0000000000000000 R09: 0000000000000000 R10: ffff88001ea20000 R11: 0000000000000000 R12: 00000c0a1ea20000 R13: 1ea200001ea20000 R14: ffffffff815c5400 R15: ffff88001a454348 FS: 0000000000000000(0000) GS:ffff88001ee00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 0000000001c0c000 CR4: 00000000000006f0 Stack: fffffffb1a454390 ffffffff821a4500 ffff88001a454390 0000000000000100 ffff88001ee03ea8 ffffffff81083e9a ffffffff81083e15 ffffffff82d5ed40 ffffffff8258cc60 0000000000000000 ffffffff81ac39de 0000000000000000 Call Trace: <IRQ> [<ffffffff81083e9a>] call_timer_fn+0x8a/0x310 [<ffffffff81083e15>] ? call_timer_fn+0x5/0x310 [<ffffffff815c5400>] ? pid_param_set+0x130/0x130 [<ffffffff81084354>] run_timer_softirq+0x234/0x380 [<ffffffff8107aee4>] __do_softirq+0x104/0x430 [<ffffffff8107b5fd>] irq_exit+0xcd/0xe0 [<ffffffff81770645>] smp_apic_timer_interrupt+0x45/0x60 [<ffffffff8176efb2>] apic_timer_interrupt+0x72/0x80 <EOI> [<ffffffff810e15cd>] ? vprintk_emit+0x1dd/0x5e0 [<ffffffff81757719>] printk+0x67/0x69 [<ffffffff815c1493>] __cpufreq_add_dev.isra.13+0x883/0x8d0 [<ffffffff815c14f0>] cpufreq_add_dev+0x10/0x20 [<ffffffff814a14d1>] subsys_interface_register+0xb1/0xf0 [<ffffffff815bf5cf>] cpufreq_register_driver+0x9f/0x210 [<ffffffff81fb19af>] intel_pstate_init+0x27d/0x3be [<ffffffff81761e3e>] ? mutex_unlock+0xe/0x10 [<ffffffff81fb1732>] ? cpufreq_gov_dbs_init+0x12/0x12 [<ffffffff8100214a>] do_one_initcall+0xfa/0x1b0 [<ffffffff8109dbf5>] ? parse_args+0x225/0x3f0 [<ffffffff81f64193>] kernel_init_freeable+0x1fc/0x287 [<ffffffff81f638d0>] ? do_early_param+0x88/0x88 [<ffffffff8174b530>] ? rest_init+0x150/0x150 [<ffffffff8174b53e>] kernel_init+0xe/0x130 [<ffffffff8176e27c>] ret_from_fork+0x7c/0xb0 [<ffffffff8174b530>] ? rest_init+0x150/0x150 Code: c1 e0 05 48 63 bc 03 10 01 00 00 48 63 83 d0 00 00 00 48 63 d6 48 c1 e2 08 c1 e1 08 4c 63 c2 48 c1 e0 08 48 98 48 c1 e0 08 48 99 <49> f7 f8 48 98 48 0f af f8 48 c1 ff 08 29 f9 89 ca c1 fa 1f 89 RIP [<ffffffff815c551d>] intel_pstate_timer_func+0x11d/0x2b0 RSP <ffff88001ee03e18> ---[ end trace f166110ed22cc37a ]--- Kernel panic - not syncing: Fatal exception in interrupt Reported-and-tested-by:
Kashyap Chamarthy <kchamart@redhat.com> Cc: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Larry Finger authored
commit 9278db62 upstream. On Fedora systems, unloading rtl8192ce causes an oops. This patch fixes the problem reported at https://bugzilla.redhat.com/show_bug.cgi?id=852761. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Johannes Berg authored
commit bd02cd25 upstream. Evan Huus found (by fuzzing in wireshark) that the radiotap iterator code can access beyond the length of the buffer if the first bitmap claims an extension but then there's no data at all. Fix this. Reported-by:
Evan Huus <eapache@gmail.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Tejun Heo authored
commit 85fbd722 upstream. Freezable kthreads and workqueues are fundamentally problematic in that they effectively introduce a big kernel lock widely used in the kernel and have already been the culprit of several deadlock scenarios. This is the latest occurrence. During resume, libata rescans all the ports and revalidates all pre-existing devices. If it determines that a device has gone missing, the device is removed from the system which involves invalidating block device and flushing bdi while holding driver core layer locks. Unfortunately, this can race with the rest of device resume. Because freezable kthreads and workqueues are thawed after device resume is complete and block device removal depends on freezable workqueues and kthreads (e.g. bdi_wq, jbd2) to make progress, this can lead to deadlock - block device removal can't proceed because kthreads are frozen and kthreads can't be thawed because device resume is blocked behind block device removal. 839a8e86 ("writeback: replace custom worker pool implementation with unbound workqueue") made this particular deadlock scenario more visible but the underlying problem has always been there - the original forker task and jbd2 are freezable too. In fact, this is highly likely just one of many possible deadlock scenarios given that freezer behaves as a big kernel lock and we don't have any debug mechanism around it. I believe the right thing to do is getting rid of freezable kthreads and workqueues. This is something fundamentally broken. For now, implement a funny workaround in libata - just avoid doing block device hot[un]plug while the system is frozen. Kernel engineering at its finest. :( v2: Add EXPORT_SYMBOL_GPL(pm_freezing) for cases where libata is built as a module. v3: Comment updated and polling interval changed to 10ms as suggested by Rafael. v4: Add #ifdef CONFIG_FREEZER around the hack as pm_freezing is not defined when FREEZER is not configured thus breaking build. Reported by kbuild test robot. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Tomaž Šolc <tomaz.solc@tablix.org> Reviewed-by:
"Rafael J. Wysocki" <rjw@rjwysocki.net> Link: https://bugzilla.kernel.org/show_bug.cgi?id=62801 Link: http://lkml.kernel.org/r/20131213174932.GA27070@htj.dyndns.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Len Brown <len.brown@intel.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
-
Robin H. Johnson authored
commit b8bd6dc3 upstream. A user on StackExchange had a failing SSD that's soldered directly onto the motherboard of his system. The BIOS does not give any option to disable it at all, so he can't just hide it from the OS via the BIOS. The old IDE layer had hdX=noprobe override for situations like this, but that was never ported to the libata layer. This patch implements a disable flag for libata.force. Example use: libata.force=2.0:disable [v2 of the patch, removed the nodisable flag per Tejun Heo] Signed-off-by:
Robin H. Johnson <robbat2@gentoo.org> Signed-off-by:
-
Vincent Pelletier authored
commit 966fbe19 upstream. Some device require DMADIR to be enabled, but are not detected as such by atapi_id_dmadir. One such example is "Asus Serillel 2" SATA-host-to-PATA-device bridge: the bridge itself requires DMADIR, even if the bridged device does not. As atapi_dmadir module parameter can cause problems with some devices (as per Tejun Heo's memory), enabling it globally may not be possible depending on the hardware. This patch adds atapi_dmadir in the form of a "force" horkage value, allowing global, per-bus and per-device control. Signed-off-by:
Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by:
-
Michele Baldessari authored
commit 87809942 upstream. We've received multiple reports in Fedora via (BZ 907193) that the Seagate Momentus SpinPoint M8 errors out when enabling AA: [ 2.555905] ata2.00: failed to enable AA (error_mask=0x1) [ 2.568482] ata2.00: failed to enable AA (error_mask=0x1) Add the ATA_HORKAGE_BROKEN_FPDMA_AA for this specific harddisk. Reported-by:
Nicholas <arealityfarbetween@googlemail.com> Signed-off-by:
Michele Baldessari <michele@acksyn.org> Tested-by:
Alan Cox <gnomes@lxorguk.ukuu.org.uk> Signed-off-by:
-
Josh Boyer authored
commit f447ef4a upstream. If a user calls 'cpupower set --perf-bias 15', the process will end with a SIGSEGV in libc because cpupower-set passes a NULL optarg to the atoi call. This is because the getopt_long structure currently has all of the options as having an optional_argument when they really have a required argument. We change the structure to use required_argument to match the short options and it resolves the issue. This fixes https://bugzilla.redhat.com/show_bug.cgi?id=1000439Signed-off-by:
Josh Boyer <jwboyer@fedoraproject.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Thomas Renninger <trenn@suse.de> Signed-off-by:
-
Anton Blanchard authored
commit 286e4f90 upstream. p_end is an 8 byte value embedded in the text section. This means it is only 4 byte aligned when it should be 8 byte aligned. Fix this by adding an explicit alignment. This fixes an issue where POWER7 little endian builds with CONFIG_RELOCATABLE=y fail to boot. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Michael Neuling authored
commit 90ff5d68 upstream. In EXCEPTION_PROLOG_COMMON() we check to see if the stack pointer (r1) is valid when coming from the kernel. If it's not valid, we die but with a nice oops message. Currently we allocate a stack frame (subtract INT_FRAME_SIZE) before we check to see if the stack pointer is negative. Unfortunately, this won't detect a bad stack where r1 is less than INT_FRAME_SIZE. This patch fixes the check to compare the modified r1 with -INT_FRAME_SIZE. With this, bad kernel stack pointers (including NULL pointers) are correctly detected again. Kudos to Paulus for finding this. Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
-
Jan Kiszka authored
commit e66d2ae7 upstream. Update arch.apic_base before triggering recalculate_apic_map. Otherwise the recalculation will work against the previous state of the APIC and will fail to build the correct map when an APIC is hardware-enabled again. This fixes a regression of 1e08ec4a. Signed-off-by:
Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by:
-
Mathy Vanhoef authored
commit 657eb17d upstream. Pick the MAC address of the first virtual interface as the new hardware MAC address. Set BSSID mask according to this MAC address. This fixes CVE-2013-4579. Signed-off-by:
Mathy Vanhoef <vanhoefm@gmail.com> Signed-off-by:
-
Sujith Manoharan authored
commit 73f0b56a upstream. This patch adds a driver workaround for a HW issue. A race condition in the HW results in missing interrupts, which can be avoided by a read/write with the ISR register. All chips in the AR9002 series are affected by this bug - AR9003 and above do not have this problem. Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by:
Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by:
-
Peter Korsgaard authored
commit 4263c86d upstream. Certain dm962x revisions contain an bug, where if a USB bulk transfer retry (E.G. if bulk crc mismatch) happens right after a transfer with odd or maxpacket length, the internal tx hardware fifo gets out of sync causing the interface to stop working. Work around it by adding up to 3 bytes of padding to ensure this situation cannot trigger. This workaround also means we never pass multiple-of-maxpacket size skb's to usbnet, so the length adjustment to handle usbnet's padding of those can be removed. Reported-by:
Joseph Chang <joseph_chang@davicom.com.tw> Signed-off-by:
Peter Korsgaard <peter@korsgaard.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Peter Korsgaard authored
commit 407900cf upstream. dm9620/dm9621a require room for 4 byte padding even in dm9601 (3 byte header) mode. Signed-off-by:
-
Ard Biesheuvel authored
commit f60900f2 upstream. Commit 2171364d ("powerpc: Add HWCAP2 aux entry") introduced a new AT_ auxv entry type AT_HWCAP2 but failed to update AT_VECTOR_SIZE_BASE accordingly. Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Fixes: 2171364d (powerpc: Add HWCAP2 aux entry) Acked-by:
Michael Neuling <michael@neuling.org> Cc: Nishanth Aravamudan <nacc@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Nithin Sujir authored
commit 37567910 upstream. The current driver assumes that an skb fragment can only be upto jumbo size. Presumably this was a fast-path optimization. This assumption is no longer true as fragments can be upto 32k. v2: Remove unnecessary parantheses per Eric Dumazet. Signed-off-by:
Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Li Wang authored
commit 56f91aad upstream. If the length of data to be read in readpage() is exactly PAGE_CACHE_SIZE, the original code does not flush d-cache for data consistency after finishing reading. This patches fixes this. Signed-off-by:
Li Wang <liwang@ubuntukylin.com> Signed-off-by:
Sage Weil <sage@inktank.com> Signed-off-by:
-
Alex Deucher authored
commit d00adcc8 upstream. Fixes rendering corruption due to incorrect gfx configuration. bug: https://bugs.freedesktop.org/show_bug.cgi?id=63599Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Christian König authored
commit bae651db upstream. Otherwise the kernel might reject our decoding requests. Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Chris Wilson authored
commit a885b3cc upstream. The GMCH_CTRL register (or MGCC in the spec) is at a different address on Sandybridge, and the address to which we currently write to is undefined. These stray writes appear to upset (hard hang) my Ivybridge machine whilst it is in UEFI mode. Note that the register is still marked as locked RO on Sandybridge, so vgaarb is still dysfunctional. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Alex Deucher authored
commit e2f6c88f upstream. Fixes gfx corruption on certain TN/RL parts. bug: https://bugs.freedesktop.org/show_bug.cgi?id=60389Signed-off-by:
-
Daniel Vetter authored
commit 6c719fac upstream. The update is horribly racy since it doesn't protect at all against concurrent closing of the master fd. And it can't really since that requires us to grab a mutex. Instead of jumping through hoops and offloading this to a worker thread just block this bit of code for the modesetting driver. Note that the race is fairly easy to hit since we call the breadcrumb function for any interrupt. So the vblank interrupt (which usually keeps going for a bit) is enough. But even if we'd block this and only update the breadcrumb for user interrupts from the CS we could hit this race with kms/gem userspace: If a non-master is waiting somewhere (and hence has interrupts enabled) and the master closes its fd (probably due to crashing). v2: Add a code comment to explain why fixing this for real isn't really worth it. Also improve the commit message a bit. v3: Fix the spelling in the comment. Reported-by:
Eugene Shatokhin <eugene.shatokhin@rosalab.ru> Cc: Eugene Shatokhin <eugene.shatokhin@rosalab.ru> Acked-by:
-
Chris Wilson authored
commit 0d1430a3 upstream. Inorder to serialise the closing of the file descriptor and its subsequent release of client requests with i915_gem_free_request(), we need to hold the struct_mutex in i915_gem_release(). Failing to do so has the potential to trigger an OOPS, later with a use-after-free. Testcase: igt/gem_close_race Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70874 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71029Reported-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
-
Ville Syrjälä authored
commit 02747664 upstream. Some lower level things get angry if we don't have modeset locks during intel_modeset_setup_hw_state(). Actually the resume and lid_notify codepaths alreday hold the locks, but the init codepath doesn't, so fix that. Note: This slipped through since we only disable pipes if the plane/pipe linking doesn't match. Which is only relevant on older gen3 mobile machines, if the BIOS fails to set up our preferred linking. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-and-reported-by:
Paul Bolle <pebolle@tiscali.nl> [danvet: Add note now that I could confirm my theory with the log files Paul Bolle provided.] Signed-off-by:
-
Alex Deucher authored
commit 227ae10f upstream. Fixes improperly set up display params for 2D tiling on oland. Signed-off-by:
-
Alex Deucher authored
commit 8333f0fe upstream. Some RS690 boards with 64MB of sideport memory show up as having 128MB sideport + 256MB of UMA. In this case, just skip the sideport memory and use UMA. This fixes rendering corruption and should improve performance. bug: https://bugs.freedesktop.org/show_bug.cgi?id=35457Signed-off-by:
-
Rafał Miłecki authored
commit 49d45a31 upstream. This bug in EDID was exposed by: commit eccea792 Author: Alex Deucher <alexander.deucher@amd.com> Date: Mon Mar 26 15:12:54 2012 -0400 drm/radeon/kms: improve bpc handling (v2) Which resulted in kind of regression in 3.5. This fixes https://bugs.freedesktop.org/show_bug.cgi?id=70934Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Dan Williams authored
commit 77873803 upstream. net_dma can cause data to be copied to a stale mapping if a copy-on-write fault occurs during dma. The application sees missing data. The following trace is triggered by modifying the kernel to WARN if it ever triggers copy-on-write on a page that is undergoing dma: WARNING: CPU: 24 PID: 2529 at lib/dma-debug.c:485 debug_dma_assert_idle+0xd2/0x120() ioatdma 0000:00:04.0: DMA-API: cpu touching an active dma mapped page [pfn=0x16bcd9] Modules linked in: iTCO_wdt iTCO_vendor_support ioatdma lpc_ich pcspkr dca CPU: 24 PID: 2529 Comm: linbug Tainted: G W 3.13.0-rc1+ #353 00000000000001e5 ffff88016f45f688 ffffffff81751041 ffff88017ab0ef70 ffff88016f45f6d8 ffff88016f45f6c8 ffffffff8104ed9c ffffffff810f3646 ffff8801768f4840 0000000000000282 ffff88016f6cca10 00007fa2bb699349 Call Trace: [<ffffffff81751041>] dump_stack+0x46/0x58 [<ffffffff8104ed9c>] warn_slowpath_common+0x8c/0xc0 [<ffffffff810f3646>] ? ftrace_pid_func+0x26/0x30 [<ffffffff8104ee86>] warn_slowpath_fmt+0x46/0x50 [<ffffffff8139c062>] debug_dma_assert_idle+0xd2/0x120 [<ffffffff81154a40>] do_wp_page+0xd0/0x790 [<ffffffff811582ac>] handle_mm_fault+0x51c/0xde0 [<ffffffff813830b9>] ? copy_user_enhanced_fast_string+0x9/0x20 [<ffffffff8175fc2c>] __do_page_fault+0x19c/0x530 [<ffffffff8175c196>] ? _raw_spin_lock_bh+0x16/0x40 [<ffffffff810f3539>] ? trace_clock_local+0x9/0x10 [<ffffffff810fa1f4>] ? rb_reserve_next_event+0x64/0x310 [<ffffffffa0014c00>] ? ioat2_dma_prep_memcpy_lock+0x60/0x130 [ioatdma] [<ffffffff8175ffce>] do_page_fault+0xe/0x10 [<ffffffff8175c862>] page_fault+0x22/0x30 [<ffffffff81643991>] ? __kfree_skb+0x51/0xd0 [<ffffffff813830b9>] ? copy_user_enhanced_fast_string+0x9/0x20 [<ffffffff81388ea2>] ? memcpy_toiovec+0x52/0xa0 [<ffffffff8164770f>] skb_copy_datagram_iovec+0x5f/0x2a0 [<ffffffff8169d0f4>] tcp_rcv_established+0x674/0x7f0 [<ffffffff816a68c5>] tcp_v4_do_rcv+0x2e5/0x4a0 [..] ---[ end trace e30e3b01191b7617 ]--- Mapped at: [<ffffffff8139c169>] debug_dma_map_page+0xb9/0x160 [<ffffffff8142bf47>] dma_async_memcpy_pg_to_pg+0x127/0x210 [<ffffffff8142cce9>] dma_memcpy_pg_to_iovec+0x119/0x1f0 [<ffffffff81669d3c>] dma_skb_copy_datagram_iovec+0x11c/0x2b0 [<ffffffff8169d1ca>] tcp_rcv_established+0x74a/0x7f0: ...the problem is that the receive path falls back to cpu-copy in several locations and this trace is just one of the areas. A few options were considered to fix this: 1/ sync all dma whenever a cpu copy branch is taken 2/ modify the page fault handler to hold off while dma is in-flight Option 1 adds yet more cpu overhead to an "offload" that struggles to compete with cpu-copy. Option 2 adds checks for behavior that is already documented as broken when using get_user_pages(). At a minimum a debug mode is warranted to catch and flag these violations of the dma-api vs get_user_pages(). Thanks to David for his reproducer. Cc: Dave Jiang <dave.jiang@intel.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Alexander Duyck <alexander.h.duyck@intel.com> Reported-by:
David Whipple <whipple@securedatainnovations.ch> Acked-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Stefan Richter authored
commit ce027ed9 upstream. Commit 54b2b50c "[SCSI] Disable WRITE SAME for RAID and virtual host adapter drivers" disabled WRITE SAME support for all SBP-2 attached targets. But as described in the changelog of commit b0ea5f19 "firewire: sbp2: allow WRITE SAME and REPORT SUPPORTED OPERATION CODES", it is not required to blacklist WRITE SAME. Bring the feature back by reverting the sbp2.c hunk of commit 54b2b50c. Signed-off-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by:
-
Kirill Tkhai authored
commit 757dfcaa upstream. This patch touches the RT group scheduling case. Functions inc_rt_prio_smp() and dec_rt_prio_smp() change (global) rq's priority, while rt_rq passed to them may be not the top-level rt_rq. This is wrong, because changing of priority on a child level does not guarantee that the priority is the highest all over the rq. So, this leak makes RT balancing unusable. The short example: the task having the highest priority among all rq's RT tasks (no one other task has the same priority) are waking on a throttle rt_rq. The rq's cpupri is set to the task's priority equivalent, but real rq->rt.highest_prio.curr is less. The patch below fixes the problem. Signed-off-by:
Kirill Tkhai <tkhai@yandex.ru> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
