Michael Chan says:

====================
bnxt_en: Bug fixes.

5 bug fix patches covering an indexing bug for priority counters, memory
leak when retrieving DCB ETS settings, error path return code, proper
disabling of PCI before freeing context memory, and proper ring accounting
in error path.

Please also apply these to -stable.  Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

If ring counts are not reset when ring reservation fails,
bnxt_init_dflt_ring_mode() will not be called again to reinitialise
IRQs when open() is called and results in system crash as napi will
also be not initialised. This patch fixes it by resetting the ring
counts.

Fixes: 47558acd ("bnxt_en: Reserve rings at driver open if none was reserved at probe time.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Other shutdown code paths will always disable PCI first to shutdown DMA
before freeing context memory.  Do the same sequence in the error path
of probe to be safe and consistent.

Fixes: c20dc142 ("bnxt_en: Disable bus master during PCI shutdown and driver unload.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The current code ignores the return value from
bnxt_hwrm_func_backing_store_cfg(), causing the driver to proceed in
the init path even when this vital firmware call has failed.  Fix it
by propagating the error code to the caller.

Fixes: 1b9394e5 ("bnxt_en: Configure context memory on new devices.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The allocated ieee_ets structure goes out of scope without being freed,
leaking memory. Appropriate result codes should be returned so that
callers do not rely on invalid data passed by reference.

Also cache the ETS config retrieved from the device so that it doesn't
need to be freed. The balance of the code was clearly written with the
intent of having the results of querying the hardware cached in the
device structure. The commensurate store was evidently missed though.

Fixes: 7df4ae9f ("bnxt_en: Implement DCBNL to support host-based DCBX.")
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is an indexing bug in determining these ethtool priority
counters.  Instead of using the queue ID to index, we need to
normalize by modulo 10 to get the index.  This index is then used
to obtain the proper CoS queue counter.  Rename bp->pri2cos to
bp->pri2cos_idx to make this more clear.

Fixes: e37fed79 ("bnxt_en: Add ethtool -S priority counters.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Only attach macsec to ethernet devices.

Syzbot was able to trigger a KMSAN warning in macsec_handle_frame
by attaching to a phonet device.

Macvlan has a similar check in macvlan_port_create.

v1->v2
  - fix commit message typo
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Unlike NL_SET_ERR_* macros, nl_set_extack_cookie_u64() and
nl_set_extack_cookie_u32() helpers do not check extack argument for null
and neither do their callers, as syzbot recently discovered for
ethnl_parse_header().

Instead of fixing the callers and leaving the trap in place, add check of
null extack to both helpers to make them consistent with NL_SET_ERR_*
macros.

v2: drop incorrect second Fixes tag

Fixes: 2363d73a ("ethtool: reject unrecognized request flags")
Reported-by: syzbot+258a9089477493cea67b@syzkaller.appspotmail.com
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

ASKEY WWHC050 is a mcie LTE modem.
The oem configuration states:

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1690 ProdID=7588 Rev=ff.ff
S:  Manufacturer=Android
S:  Product=Android
S:  SerialNumber=813f0eef6e6e
C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=88(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us

Tested on openwrt distribution.
Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

The nci_conn_max_data_pkt_payload_size() function sometimes returns
-EPROTO so "max_size" needs to be signed for the error handling to
work.  We can make "payload_size" an int as well.

Fixes: a06347c0 ("NFC: Add Intel Fields Peak NFC solution driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a place,

inet_dump_fib()
  fib_table_dump
    fn_trie_dump_leaf()
      hlist_for_each_entry_rcu()

without rcu_read_lock() will trigger a warning,

 WARNING: suspicious RCU usage
 -----------------------------
 net/ipv4/fib_trie.c:2216 RCU-list traversed in non-reader section!!

 other info that might help us debug this:

 rcu_scheduler_active = 2, debug_locks = 1
 1 lock held by ip/1923:
  #0: ffffffff8ce76e40 (rtnl_mutex){+.+.}, at: netlink_dump+0xd6/0x840

 Call Trace:
  dump_stack+0xa1/0xea
  lockdep_rcu_suspicious+0x103/0x10d
  fn_trie_dump_leaf+0x581/0x590
  fib_table_dump+0x15f/0x220
  inet_dump_fib+0x4ad/0x5d0
  netlink_dump+0x350/0x840
  __netlink_dump_start+0x315/0x3e0
  rtnetlink_rcv_msg+0x4d1/0x720
  netlink_rcv_skb+0xf0/0x220
  rtnetlink_rcv+0x15/0x20
  netlink_unicast+0x306/0x460
  netlink_sendmsg+0x44b/0x770
  __sys_sendto+0x259/0x270
  __x64_sys_sendto+0x80/0xa0
  do_syscall_64+0x69/0xf4
  entry_SYSCALL_64_after_hwframe+0x49/0xb3

Fixes: 18a8021a ("net/ipv4: Plumb support for filtering route dumps")
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
Mellanox, mlx5 fixes 2020-03-05

This series introduces some fixes to mlx5 driver.

Please pull and let me know if there is any problem.

For -stable v5.4
 ('net/mlx5: DR, Fix postsend actions write length')

For -stable v5.5
 ('net/mlx5e: kTLS, Fix TCP seq off-by-1 issue in TX resync flow')
 ('net/mlx5e: Fix endianness handling in pedit mask')
====================
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

When application uses TCP_QUEUE_SEQ socket option to
change tp->rcv_next, we must also update tp->copied_seq.

Otherwise, stuff relying on tcp_inq() being precise can
eventually be confused.

For example, tcp_zerocopy_receive() might crash because
it does not expect tcp_recv_skb() to return NULL.

We could add tests in various places to fix the issue,
or simply make sure tcp_inq() wont return a random value,
and leave fast path as it is.

Note that this fixes ioctl(fd, SIOCINQ, &val) at the same
time.

Fixes: ee995283 ("tcp: Initial repair mode")
Fixes: 05255b82 ("tcp: add TCP_ZEROCOPY_RECEIVE support for zerocopy receive")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Many systems build/test up-to-date kernels with older libcs, and
an older glibc (2.17) lacks the definition of SOL_DCCP in
/usr/include/bits/socket.h (it was added in the 4.6 timeframe).

Adding the definition to the test program avoids a compilation
failure that gets in the way of building tools/testing/selftests/net.
The test itself will work once the definition is added; either
skipping due to DCCP not being configured in the kernel under test
or passing, so there are no other more up-to-date glibc dependencies
here it seems beyond that missing definition.

Fixes: 11fb60d1 ("selftests: net: reuseport_addr_any: add DCCP")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The hardware offloading of the NETIF_F_HW_CSUM and NETIF_F_RXCSUM
features requires the use of Transmit Status Blocks before transmit
frame data and Receive Status Blocks before receive frame data to
carry the checksum information.

Unfortunately, these status blocks are currently only enabled when
the NETIF_F_HW_CSUM feature is enabled. As a result NETIF_F_RXCSUM
will not actually be offloaded to the hardware unless both it and
NETIF_F_HW_CSUM are enabled. Fortunately, that is the default
configuration.

This commit addresses this issue by always enabling the use of
status blocks on both transmit and receive frames. Further, it
replaces the use of a dedicated flag within the driver private
data structure with direct use of the netdev features flags.

Fixes: 81015539 ("net: bcmgenet: use CHECKSUM_COMPLETE for NETIF_F_RXCSUM")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the DP83867 PHY is strapped to enable Fast Link Drop (FLD) feature
STRAP_STS2.STRAP_ FLD (reg 0x006F bit 10), the Energy Lost Threshold for
FLD Energy Lost Mode FLD_THR_CFG.ENERGY_LOST_FLD_THR (reg 0x002e bits 2:0)
will be defaulted to 0x2. This may cause the phy link to be unstable. The
new DP83867 DM recommends to always restore ENERGY_LOST_FLD_THR to 0x1.

Hence, restore default value of FLD_THR_CFG.ENERGY_LOST_FLD_THR to 0x1 when
FLD is enabled by bootstrapping as recommended by DM.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make sure we clean up devicetree related configuration
also when clock init fails.

Fixes: fecd4d7e ("net: stmmac: dwmac-rk: Add integrated PHY support")
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

As the description before netdev_run_todo, we cannot call free_netdev
before rtnl_unlock, fix it by reorder the code.

This patch is a 1:1 copy of upstream slip.c commit f596c870
("slip: not call free_netdev before rtnl_unlock in slip_open").
Reported-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Headers ionic_if.h and ionic_regs.h are licensed under three alternative
licenses and the used SPDX-License-Identifier expression makes
./scripts/spdxcheck.py complain:

drivers/net/ethernet/pensando/ionic/ionic_if.h: 1:52 Syntax error: OR
drivers/net/ethernet/pensando/ionic/ionic_regs.h: 1:52 Syntax error: OR

As OR is associative, it is irrelevant if the parentheses are put around
the first or the second OR-expression.

Simply add parentheses to make spdxcheck.py happy.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

The port->hsr is used in the hsr_handle_frame(), which is a
callback of rx_handler.
hsr master and slaves are initialized in hsr_add_port().
This function initializes several pointers, which includes port->hsr after
registering rx_handler.
So, in the rx_handler routine, un-initialized pointer would be used.
In order to fix this, pointers should be initialized before
registering rx_handler.

Test commands:
    ip netns del left
    ip netns del right
    modprobe -rv veth
    modprobe -rv hsr
    killall ping
    modprobe hsr
    ip netns add left
    ip netns add right
    ip link add veth0 type veth peer name veth1
    ip link add veth2 type veth peer name veth3
    ip link add veth4 type veth peer name veth5
    ip link set veth1 netns left
    ip link set veth3 netns right
    ip link set veth4 netns left
    ip link set veth5 netns right
    ip link set veth0 up
    ip link set veth2 up
    ip link set veth0 address fc:00:00:00:00:01
    ip link set veth2 address fc:00:00:00:00:02
    ip netns exec left ip link set veth1 up
    ip netns exec left ip link set veth4 up
    ip netns exec right ip link set veth3 up
    ip netns exec right ip link set veth5 up
    ip link add hsr0 type hsr slave1 veth0 slave2 veth2
    ip a a 192.168.100.1/24 dev hsr0
    ip link set hsr0 up
    ip netns exec left ip link add hsr1 type hsr slave1 veth1 slave2 veth4
    ip netns exec left ip a a 192.168.100.2/24 dev hsr1
    ip netns exec left ip link set hsr1 up
    ip netns exec left ip n a 192.168.100.1 dev hsr1 lladdr \
	    fc:00:00:00:00:01 nud permanent
    ip netns exec left ip n r 192.168.100.1 dev hsr1 lladdr \
	    fc:00:00:00:00:01 nud permanent
    for i in {1..100}
    do
        ip netns exec left ping 192.168.100.1 &
    done
    ip netns exec left hping3 192.168.100.1 -2 --flood &
    ip netns exec right ip link add hsr2 type hsr slave1 veth3 slave2 veth5
    ip netns exec right ip a a 192.168.100.3/24 dev hsr2
    ip netns exec right ip link set hsr2 up
    ip netns exec right ip n a 192.168.100.1 dev hsr2 lladdr \
	    fc:00:00:00:00:02 nud permanent
    ip netns exec right ip n r 192.168.100.1 dev hsr2 lladdr \
	    fc:00:00:00:00:02 nud permanent
    for i in {1..100}
    do
        ip netns exec right ping 192.168.100.1 &
    done
    ip netns exec right hping3 192.168.100.1 -2 --flood &
    while :
    do
        ip link add hsr0 type hsr slave1 veth0 slave2 veth2
	ip a a 192.168.100.1/24 dev hsr0
	ip link set hsr0 up
	ip link del hsr0
    done

Splat looks like:
[  120.954938][    C0] general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1]I
[  120.957761][    C0] KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
[  120.959064][    C0] CPU: 0 PID: 1511 Comm: hping3 Not tainted 5.6.0-rc5+ #460
[  120.960054][    C0] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[  120.962261][    C0] RIP: 0010:hsr_addr_is_self+0x65/0x2a0 [hsr]
[  120.963149][    C0] Code: 44 24 18 70 73 2f c0 48 c1 eb 03 48 8d 04 13 c7 00 f1 f1 f1 f1 c7 40 04 00 f2 f2 f2 4
[  120.966277][    C0] RSP: 0018:ffff8880d9c09af0 EFLAGS: 00010206
[  120.967293][    C0] RAX: 0000000000000006 RBX: 1ffff1101b38135f RCX: 0000000000000000
[  120.968516][    C0] RDX: dffffc0000000000 RSI: ffff8880d17cb208 RDI: 0000000000000000
[  120.969718][    C0] RBP: 0000000000000030 R08: ffffed101b3c0e3c R09: 0000000000000001
[  120.972203][    C0] R10: 0000000000000001 R11: ffffed101b3c0e3b R12: 0000000000000000
[  120.973379][    C0] R13: ffff8880aaf80100 R14: ffff8880aaf800f2 R15: ffff8880aaf80040
[  120.974410][    C0] FS:  00007f58e693f740(0000) GS:ffff8880d9c00000(0000) knlGS:0000000000000000
[  120.979794][    C0] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  120.980773][    C0] CR2: 00007ffcb8b38f29 CR3: 00000000afe8e001 CR4: 00000000000606f0
[  120.981945][    C0] Call Trace:
[  120.982411][    C0]  <IRQ>
[  120.982848][    C0]  ? hsr_add_node+0x8c0/0x8c0 [hsr]
[  120.983522][    C0]  ? rcu_read_lock_held+0x90/0xa0
[  120.984159][    C0]  ? rcu_read_lock_sched_held+0xc0/0xc0
[  120.984944][    C0]  hsr_handle_frame+0x1db/0x4e0 [hsr]
[  120.985597][    C0]  ? hsr_nl_nodedown+0x2b0/0x2b0 [hsr]
[  120.986289][    C0]  __netif_receive_skb_core+0x6bf/0x3170
[  120.992513][    C0]  ? check_chain_key+0x236/0x5d0
[  120.993223][    C0]  ? do_xdp_generic+0x1460/0x1460
[  120.993875][    C0]  ? register_lock_class+0x14d0/0x14d0
[  120.994609][    C0]  ? __netif_receive_skb_one_core+0x8d/0x160
[  120.995377][    C0]  __netif_receive_skb_one_core+0x8d/0x160
[  120.996204][    C0]  ? __netif_receive_skb_core+0x3170/0x3170
[ ... ]

Reported-by: syzbot+fcf5dd39282ceb27108d@syzkaller.appspotmail.com
Fixes: c5a75911 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Luo bin says:

====================
hinic: BugFixes

Fix a number of bugs which have been present since the first commit.

The bugs fixed in these patchs are hardly exposed unless given
very specific conditions.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

the minimum value of skb len that hw supports is 32 rather than 17
Signed-off-by: Luo bin <luobin9@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

the second input parameter of wait_for_completion_timeout should
be jiffies instead of millisecond
Signed-off-by: Luo bin <luobin9@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

add read barrier in driver code to keep from reading other fileds
in dma memory which is writable for hw until we have verified the
memory is valid for driver
Signed-off-by: Luo bin <luobin9@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

should disable eq irq before freeing it, must clear event queue
depth in hw before freeing relevant memory to avoid illegal
memory access and update consumer idx to avoid invalid interrupt
Signed-off-by: Luo bin <luobin9@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

it's unreliable for fw to check whether IO is stopped, so driver
wait for enough time to ensure IO process is done in hw before
freeing resources
Signed-off-by: Luo bin <luobin9@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In rare cases retransmit logic will make a full skb copy, which will not
trigger the zeroing added in recent change
b738a185 ("tcp: ensure skb->dev is NULL before leaving TCP stack").

Cc: Eric Dumazet <edumazet@google.com>
Fixes: 75c119af ("tcp: implement rb-tree based retransmit queue")
Fixes: 28f8bfd1 ("netfilter: Support iif matches in POSTROUTING")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Refetch IP header pointer after pskb_may_pull() in flowtable,
   from Haishuang Yan.

2) Fix memleak in flowtable offload in nf_flow_table_free(),
   from Paul Blakey.

3) Set control.addr_type mask in flowtable offload, from Edward Cree.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

skb->rbnode is sharing three skb fields : next, prev, dev

When a packet is sent, TCP keeps the original skb (master)
in a rtx queue, which was converted to rbtree a while back.

__tcp_transmit_skb() is responsible to clone the master skb,
and add the TCP header to the clone before sending it
to network layer.

skb_clone() already clears skb->next and skb->prev, but copies
the master oskb->dev into the clone.

We need to clear skb->dev, otherwise lower layers could interpret
the value as a pointer to a netdev.

This old bug surfaced recently when commit 28f8bfd1
("netfilter: Support iif matches in POSTROUTING") was merged.

Before this netfilter commit, skb->dev value was ignored and
changed before reaching dev_queue_xmit()

Fixes: 75c119af ("tcp: implement rb-tree based retransmit queue")
Fixes: 28f8bfd1 ("netfilter: Support iif matches in POSTROUTING")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Martin Zaharinov <micron10@gmail.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Driver reclaims descriptors in much smaller batches, even if hardware
indicates more to reclaim, during backpressure. So, fix the check to
restart the Txq during backpressure, by looking at how many
descriptors hardware had indicated to reclaim, and not on how many
descriptors that driver had actually reclaimed. Once the Txq is
restarted, driver will reclaim even more descriptors when Tx path
is entered again.

Fixes: d429005f ("cxgb4/cxgb4vf: Add support for SGE doorbell queue timer")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit 7c3bebc3 ("cxgb4: request the TX CIDX updates to status page")
reverted back to getting Tx CIDX updates via DMA, instead of interrupts,
introduced by commit d429005f ("cxgb4/cxgb4vf: Add support for SGE
doorbell queue timer")

However, it missed reverting back several code changes where Tx CIDX
updates are not explicitly requested during backpressure when using
interrupt mode. These missed changes cause slow recovery during
backpressure because the corresponding interrupt no longer comes and
hence results in Tx throughput drop.

So, revert back these missed code changes, as well, which will allow
explicitly requesting Tx CIDX updates when backpressure happens.
This enables the corresponding interrupt with Tx CIDX update message
to get generated and hence speed up recovery and restore back
throughput.

Fixes: 7c3bebc3 ("cxgb4: request the TX CIDX updates to status page")
Fixes: d429005f ("cxgb4/cxgb4vf: Add support for SGE doorbell queue timer")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Andrew reported:

After a number of network port link up/down changes, sometimes the switch
port gets stuck in a state where it thinks it is still transmitting packets
but the cpu port is not actually transmitting anymore. In this state you
will see a message on the console
"mtk_soc_eth 1e100000.ethernet eth0: transmit timed out" and the Tx counter
in ifconfig will be incrementing on virtual port, but not incrementing on
cpu port.

The issue is that MAC TX/RX status has no impact on the link status or
queue manager of the switch. So the queue manager just queues up packets
of a disabled port and sends out pause frames when the queue is full.

Change the LINK bit to reflect the link status.

Fixes: b8f126a8 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Reported-by: Andrew Smith <andrew.smith@digi.com>
Signed-off-by: René van Dorst <opensource@vdorst.com>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

David Howells says:

====================
rxrpc, afs: Interruptibility fixes

Here are a number of fixes for AF_RXRPC and AFS that make AFS system calls
less interruptible and so less likely to leave the filesystem in an
uncertain state.  There's also a miscellaneous patch to make tracing
consistent.

 (1) Firstly, abstract out the Tx space calculation in sendmsg.  Much the
     same code is replicated in a number of places that subsequent patches
     are going to alter, including adding another copy.

 (2) Fix Tx interruptibility by allowing a kernel service, such as AFS, to
     request that a call be interruptible only when waiting for a call slot
     to become available (ie. the call has not taken place yet) or that a
     call be not interruptible at all (e.g. when we want to do writeback
     and don't want a signal interrupting a VM-induced writeback).

 (3) Increase the minimum delay on MSG_WAITALL for userspace sendmsg() when
     waiting for Tx buffer space as a 2*RTT delay is really small over 10G
     ethernet and a 1 jiffy timeout might be essentially 0 if at the end of
     the jiffy period.

 (4) Fix some tracing output in AFS to make it consistent with rxrpc.

 (5) Make sure aborted asynchronous AFS operations are tidied up properly
     so we don't end up with stuck rxrpc calls.

 (6) Make AFS client calls uninterruptible in the Rx phase.  If we don't
     wait for the reply to be fully gathered, we can't update the local VFS
     state and we end up in an indeterminate state with respect to the
     server.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

During initialization the driver issues a software reset command and
then waits for the system status to change back to "ready" state.

However, before issuing the reset command the driver does not check that
the system is actually in "ready" state. On Spectrum-{1,2} systems this
was always the case as the hardware initialization time is very short.
On Spectrum-3 systems this is no longer the case. This results in the
software reset command timing-out and the driver failing to load:

[ 6.347591] mlxsw_spectrum3 0000:06:00.0: Cmd exec timed-out (opcode=40(ACCESS_REG),opcode_mod=0,in_mod=0)
[ 6.358382] mlxsw_spectrum3 0000:06:00.0: Reg cmd access failed (reg_id=9023(mrsr),type=write)
[ 6.368028] mlxsw_spectrum3 0000:06:00.0: cannot register bus device
[ 6.375274] mlxsw_spectrum3: probe of 0000:06:00.0 failed with error -110

Fix this by waiting for the system to become ready both before issuing
the reset command and afterwards. In case of failure, print the last
system status to aid in debugging.

Fixes: da382875 ("mlxsw: spectrum: Extend to support Spectrum-3 ASIC")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nf_flow_rule_match() sets control.addr_type in key, so needs to also set
 the corresponding mask.  An exact match is wanted, so mask is all ones.

Fixes: c29f74e0 ("netfilter: nf_flow_table: hardware offload support")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Freeing a flowtable with offloaded flows, the flow are deleted from
hardware but are not deleted from the flow table, leaking them,
and leaving their offload bit on.

Add a second pass of the disabled gc to delete the these flows from
the flow table before freeing it.

Fixes: c29f74e0 ("netfilter: nf_flow_table: hardware offload support")
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Since pskb_may_pull may change skb->data, so we need to reload ip{v6}h at
the right place.

Fixes: a908fdec ("netfilter: nf_flow_table: move ipv6 offload hook code to nf_flow_table")
Fixes: 7d208687 ("netfilter: nf_flow_table: move ipv4 offload hook code to nf_flow_table")
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Since nf_flow_snat_port and nf_flow_snat_ip{v6} call pskb_may_pull()
which may change skb->data, so we need to reload ip{v6}h at the right
place.

Fixes: a908fdec ("netfilter: nf_flow_table: move ipv6 offload hook code to nf_flow_table")
Fixes: 7d208687 ("netfilter: nf_flow_table: move ipv4 offload hook code to nf_flow_table")
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Jason A. Donenfeld says:

====================
wireguard fixes for 5.6-rc7

I originally intended to spend this cycle working on fun optimizations
and architecture for WireGuard for 5.7, but I've been a bit neurotic
about having 5.6 ship without any show stopper bugs. WireGuard has been
stable for a long time now, but that doesn't make me any less nervous
about the real deal in 5.6. To that end, I've been doing code reviews
and having discussions, and we also had a security firm audit the code.
That audit didn't turn up any vulnerabilities, but they did make a good
defense-in-depth suggestion. This series contains:

1) Removal of a duplicated header, from YueHaibing.
2) Testing with 64-bit time in our test suite.
3) Account for skb->protocol==0 due to AF_PACKET sockets, suggested
   by Florian Fainelli.
4) Clean up some code in an unreachable switch/case branch, suggested
   by Florian Fainelli.
5) Better handling of low-order points, discussed with Mathias
   Hall-Andersen.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

We precompute the static-static ECDH during configuration time, in order
to save an expensive computation later when receiving network packets.
However, not all ECDH computations yield a contributory result. Prior,
we were just not letting those peers be added to the interface. However,
this creates a strange inconsistency, since it was still possible to add
other weird points, like a valid public key plus a low-order point, and,
like points that result in zeros, a handshake would not complete. In
order to make the behavior more uniform and less surprising, simply
allow all peers to be added. Then, we'll error out later when doing the
crypto if there's an issue. This also adds more separation between the
crypto layer and the configuration layer.

Discussed-with: Mathias Hall-Andersen <mathias@hall-andersen.dk>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>