- 16 Jan, 2020 17 commits
-
-
Paul Blakey authored
To support the entire chain and prio range (32bit + 16bit), instead of a using a static array of chains/prios of limited size, create them dynamically, and use a rhashtable to search for existing chains/prio combinations. This will be used in next patch to actually increase the number using unamanged tables support and ignore flow level capability. Signed-off-by:
Paul Blakey <paulb@mellanox.com> Reviewed-by:
Roi Dayan <roid@mellanox.com> Reviewed-by:
Oz Shlomo <ozsh@mellanox.com> Reviewed-by:
Mark Bloch <markb@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Paul Blakey authored
Before changing the chain from original chain to ft offload chain, make sure user doesn't actually use chains. While here, normalize the prio range to that which we support. Signed-off-by:
-
Paul Blakey authored
FT chain is defined as the next chain after tc. To prepare for next patches that will increase the number of tc chains available at runtime, use a getter function to get this value. The define is still used in static fs_core allocation, to calculate the number of chains. This static allocation will be used if the relevant capabilities won't be available to support dynamic chains. Signed-off-by:
-
Paul Blakey authored
Exclude the last n entries for an autogrouped flow table. Reserving entries at the end of the FT will ensure that this FG will be the last to be evaluated. This will be used in the next patch to create a miss group enabling custom actions on FT miss. Signed-off-by:
-
Paul Blakey authored
If user sets ignore flow level flag on a rule, that rule can point to a flow table of any level, including those with levels equal or less than the level of the flow table it is added on. This with unamanged tables will be used to create a FDB chain/prio hierarchy much larger than currently supported level range. Signed-off-by:
-
Paul Blakey authored
Currently, Most of the steering tree is statically declared ahead of time, with steering prios instances allocated for each fdb chain to assign max number of levels for each of them. This allows fs_core to manage the connections and levels of the flow tables hierarcy to prevent loops, but restricts us with the number of supported chains and priorities. Introduce unmananged flow tables, allowing the user to manage the flow table connections. A unamanged table is detached from the fs_core flow table hierarcy, and is only connected back to the hierarchy by explicit FTEs forward actions. This will be used together with firmware that supports ignoring the flow table levels to increase the number of supported chains and prios. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxSaeed Mahameed authored
This merge syncs with mlx5-next latest HW bits and layout updates for next features, in addition one patch that improves mlx5_create_auto_grouped_flow_table() API across all mlx5 users. * 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: Refactor mlx5_create_auto_grouped_flow_table net/mlx5e: Add discard counters per priority net/mlx5e: Expose FEC feilds and related capability bit net/mlx5: Add mlx5_ifc definitions for connection tracking support net/mlx5: Add copy header action struct layout net/mlx5: Expose resource dump register mapping net/mlx5: Add structures and defines for MIRC register net/mlx5: Read MCAM register groups 1 and 2 net/mlx5: Add structures layout for new MCAM access reg groups net/mlx5: Expose vDPA emulation device capabilities net/mlx5: Add Virtio Emulation related device capabilities Signed-off-by:
-
Paul Blakey authored
Refactor mlx5_create_auto_grouped_flow_table() to use ft_attr param which already carries the max_fte, prio and flags memebers, and is used the same in similar mlx5_create_flow_table() function. Signed-off-by:
-
Aharon Landau authored
Add counters that count (per priority) the number of received packets that dropped due to lack of buffers on a physical port. If this counter is increasing, it implies that the adapter is congested and cannot absorb the traffic coming from the network. Signed-off-by:
Aharon Landau <aharonl@mellanox.com> Reviewed-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Aya Levin authored
Introduce 50G per lane FEC modes capability bit and newly supported fields in PPLM register which allow this configuration. Signed-off-by:
Aya Levin <ayal@mellanox.com> Reviewed-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
-
Paul Blakey authored
Add the required hardware definitions to mlx5_ifc: ignore_flow_level, registers, copy_header, and fwd_and_modify cap. Signed-off-by:
-
Hamdan Igbaria authored
Add definition for copy header action, copy action is used to copy header fields from source to destination. Signed-off-by:
Hamdan Igbaria <hamdani@mellanox.com> Signed-off-by:
Alex Vesker <valex@mellanox.com> Reviewed-by:
-
Aya Levin authored
Add new register enumeration for resource dump. Add layout mapping for resource dump: access command and response. Signed-off-by:
Moshe Shemesh <moshe@mellanox.com> Signed-off-by:
-
Eran Ben Elisha authored
Add needed structures, layouts and defines for MIRC (Management Image Re-activation Control) register. This structure will be used for the FSM reactivation flow in the downstream patches. Signed-off-by:
-
Eran Ben Elisha authored
On load, Driver caches MCAM (Management Capabilities Mask Register) registers. in addition to the only MCAM register group (0) the driver already reads, here we add support for reading groups 1 and 2. Signed-off-by:
-
Eran Ben Elisha authored
MCAM has 3 access_reg_groups (0-2). Defines data structures in order to read and parse access_reg_groups #1 and #2. Signed-off-by:
-
YueHaibing authored
Remove duplicated include. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 15 Jan, 2020 23 commits
-
-
Jacob Keller authored
Review of the recently added documentation file for the qed driver noticed a couple of typos. Fix them now. Noticed-by:
Michal Kalderon <mkalderon@marvell.com> Fixes: 0f261c3c ("devlink: add a driver-specific file for the qed driver") Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Signed-off-by:
-
Ulrich Weber authored
use sk_bound_dev_if for route lookup as already done in most of the other ip_route_output_ports() calls. Since most PPPoA providers use 10.0.0.138 as default gateway IP this will allow connections to multiple PPTP providers with the same IP address over different interfaces. Signed-off-by:
Ulrich Weber <ulrich.weber@gmail.com> Signed-off-by:
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Simon Wunderlich says: ==================== This feature/cleanup patchset includes the following patches: - bump version strings, by Simon Wunderlich - fix typo and kerneldocs, by Sven Eckelmann - use WiFi txbitrate for B.A.T.M.A.N. V as fallback, by René Treffer - silence some endian sparse warnings by adding annotations, by Sven Eckelmann - Update copyright years to 2020, by Sven Eckelmann - Disable deprecated sysfs configuration by default, by Sven Eckelmann ==================== Signed-off-by: -
David S. Miller authored
Nikolay Aleksandrov says: ==================== net: bridge: add vlan notifications and rtm support This patch-set is a prerequisite for adding per-vlan options support because we need to be able to send vlan-only notifications and do larger vlan netlink dumps. Per-vlan options are needed as we move the control more to vlans and would like to add per-vlan state (needed for per-vlan STP and EVPN), per-vlan multicast options and control, and I'm sure there would be many more per-vlan options coming. Now we create/delete/dump vlans with the device AF_SPEC attribute which is fine since we support vlan ranges or use a compact bridge_vlan_info structure, but that cannot really be extended to support per-vlan options well. The biggest issue is dumping them - we tried using the af_spec with a new vlan option attribute but that led to insufficient message size quickly, also another minor problem with that is we have to dump all vlans always when notifying which, with options present, can be huge if they have different options set, so we decided to add new rtm message types specifically for vlans and register handlers for them and a new bridge vlan notification nl group for vlan-only notifications. The new RTM NEW/DEL/GETVLAN types introduced match the current af spec bridge functionality and in fact use the same helpers. The new nl format is: [BRIDGE_VLANDB_ENTRY] [BRIDGE_VLANDB_ENTRY_INFO] - bridge_vlan_info (either 1 vlan or range start) [BRIDGE_VLANDB_ENTRY_RANGE] - range end This allows to encapsulate a range in a single attribute and also to create vlans and immediately set options on all of them with a single attribute. The GETVLAN dump can span multiple messages and dump all the necessary information. The vlan-only notifications are sent on NEW/DELVLAN events or when vlan options change (currently only flags), we try hard to compress the vlans into ranges in the notifications as well. When the per-vlan options are added we'll add helpers to check for option equality between neighbor vlans and will keep compressing them when possible. Note patch 02 is not really required, it's just a nice addition to have human-readable error messages from the different vlan checks. iproute2 changes and selftests will be sent with the next set which adds the first per-vlan option - per-vlan state similar to the port state. v2: changed patch 03 and patch 04 to use nlmsg_parse() in order to strictly validate the msg and make sure there are no remaining bytes ==================== Signed-off-by: -
Nikolay Aleksandrov authored
Now that we can notify, send a notification on add/del or change of flags. Notifications are also compressed when possible to reduce their number and relieve user-space of extra processing, due to that we have to manually notify after each add/del in order to avoid double notifications. We try hard to notify only about the vlans which actually changed, thus a single command can result in multiple notifications about disjoint ranges if there were vlans which didn't change inside. Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Nikolay Aleksandrov authored
Add a new rtnetlink group for bridge vlan notifications - RTNLGRP_BRVLAN and add support for sending vlan notifications (both single and ranges). No functional changes intended, the notification support will be used by later patches. Signed-off-by:
-
Nikolay Aleksandrov authored
Add a new vlandb nl attribute - BRIDGE_VLANDB_ENTRY_RANGE which causes RTM_NEWVLAN/DELVAN to act on a range. Dumps now automatically compress similar vlans into ranges. This will be also used when per-vlan options are introduced and vlans' options match, they will be put into a single range which is encapsulated in one netlink attribute. We need to run similar checks as br_process_vlan_info() does because these ranges will be used for options setting and they'll be able to skip br_process_vlan_info(). Signed-off-by:
-
Nikolay Aleksandrov authored
Adding RTM_DELVLAN support similar to RTM_NEWVLAN is simple, just need to map DELVLAN to DELLINK and register the handler. Signed-off-by:
-
Nikolay Aleksandrov authored
Add initial RTM_NEWVLAN support which can only create vlans, operating similar to the current br_afspec(). We will use it later to also change per-vlan options. Old-style (flag-based) vlan ranges are not allowed when using RTM messages, we will introduce vlan ranges later via a new nested attribute which would allow us to have all the information about a range encapsulated into a single nl attribute. Signed-off-by:
-
Nikolay Aleksandrov authored
This patch adds vlan rtm definitions: - NEWVLAN: to be used for creating vlans, setting options and notifications - DELVLAN: to be used for deleting vlans - GETVLAN: used for dumping vlan information Dumping vlans which can span multiple messages is added now with basic information (vid and flags). We use nlmsg_parse() to validate the header length in order to be able to extend the message with filtering attributes later. Signed-off-by:
-
Nikolay Aleksandrov authored
Add extack messages on vlan processing errors. We need to move the flags missing check after the "last" check since we may have "last" set but lack a range end flag in the next entry. Signed-off-by:
-
Nikolay Aleksandrov authored
Add helpers to check if a vlan id or range are valid. The range helper must be called when range start or end are detected. Signed-off-by:
-
David S. Miller authored
Ido Schimmel says: ==================== net: Add route offload indication This patch set adds offload indication to IPv4 and IPv6 routes. So far offload indication was only available for the nexthop via 'RTNH_F_OFFLOAD', which is problematic as a nexthop is usually shared between multiple routes. Based on feedback from Roopa and David on the RFC [1], the indication is split to 'offload' and 'trap'. This is done because not all the routes present in hardware actually offload traffic from the kernel. For example, host routes merely trap packets to the kernel. The two flags are dumped to user space via the 'rtm_flags' field in the ancillary header of the rtnetlink message. In addition, the patch set uses the new flags in order to test the FIB offload API by adding a dummy FIB offload implementation to netdevsim. The new tests are added to a shared library and can be therefore shared between different drivers. Patches #1-#3 add offload indication to IPv4 routes. Patches #4 adds offload indication to IPv6 routes. Patches #5-#6 add support for the offload indication in mlxsw. Patch #7 adds dummy FIB offload implementation in netdevsim. Patches #8-#10 add selftests. v2 (feedback from David Ahern): * Patch #2: Name last argument of fib_dump_info() * Patch #2: Move 'struct fib_rt_info' to include/net/ip_fib.h so that it could later be passed to fib_alias_hw_flags_set() * Patch #3: Make use of 'struct fib_rt_info' in fib_alias_hw_flags_set() * Patch #6: Convert to new fib_alias_hw_flags_set() interface * Patch #7: Convert to new fib_alias_hw_flags_set() interface [1] https://patchwork.ozlabs.org/cover/1170530/ ==================== Signed-off-by:
-
Ido Schimmel authored
The test reuses the common FIB offload tests in order to make sure that mlxsw correctly implements FIB offload. Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
Test various aspects of the FIB offload API on top of the netdevsim implementation. Both good and bad flows are tested. Signed-off-by:
-
Ido Schimmel authored
Implement a set of common helpers and tests for FIB offload that can be used by multiple drivers to check their FIB offload implementations. Signed-off-by:
-
Ido Schimmel authored
Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by:
-
Ido Schimmel authored
Previous patches added support for two hardware flags for IPv4 and IPv6 routes: 'RTM_F_OFFLOAD' and 'RTM_F_TRAP'. Both indicate the presence of the route in hardware. The first indicates that traffic is actually offloaded from the kernel, whereas the second indicates that packets hitting such routes are trapped to the kernel for processing (e.g., host routes). Use these two flags in mlxsw. The flags are modified in two places. Firstly, whenever a route is updated in the device's table. This includes the addition, deletion or update of a route. For example, when a host route is promoted to perform NVE decapsulation, its action in the device is updated, the 'RTM_F_OFFLOAD' flag set and the 'RTM_F_TRAP' flag cleared. Secondly, when a route is replaced and overwritten by another route, its flags are cleared. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by:
-
Ido Schimmel authored
The driver currently uses the 'RTNH_F_OFFLOAD' flag for both routes and nexthops, which is cumbersome and unnecessary now that we have separate flag for the route itself. Separate the offload indication for nexthops from routes and call it whenever the offload state within the nexthop group changes. Note that IPv6 (unlike IPv4) does not share the same nexthop group between different routes, whereas mlxsw does. Therefore, whenever the offload indication within an IPv6 nexthop group changes, all the linked routes need to be updated. Signed-off-by:
-
Ido Schimmel authored
In a similar fashion to previous patch, add "offload" and "trap" indication to IPv6 routes. This is done by using two unused bits in 'struct fib6_info' to hold these indications. Capable drivers are expected to set these when processing the various in-kernel route notifications. Signed-off-by:
David Ahern <dsahern@gmail.com> Acked-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
Ido Schimmel authored
When performing L3 offload, routes and nexthops are usually programmed into two different tables in the underlying device. Therefore, the fact that a nexthop resides in hardware does not necessarily mean that all the associated routes also reside in hardware and vice-versa. While the kernel can signal to user space the presence of a nexthop in hardware (via 'RTNH_F_OFFLOAD'), it does not have a corresponding flag for routes. In addition, the fact that a route resides in hardware does not necessarily mean that the traffic is offloaded. For example, unreachable routes (i.e., 'RTN_UNREACHABLE') are programmed to trap packets to the CPU so that the kernel will be able to generate the appropriate ICMP error packet. This patch adds an "offload" and "trap" indications to IPv4 routes, so that users will have better visibility into the offload process. 'struct fib_alias' is extended with two new fields that indicate if the route resides in hardware or not and if it is offloading traffic from the kernel or trapping packets to it. Note that the new fields are added in the 6 bytes hole and therefore the struct still fits in a single cache line [1]. Capable drivers are expected to invoke fib_alias_hw_flags_set() with the route's key in order to set the flags. The indications are dumped to user space via a new flags (i.e., 'RTM_F_OFFLOAD' and 'RTM_F_TRAP') in the 'rtm_flags' field in the ancillary header. v2: * Make use of 'struct fib_rt_info' in fib_alias_hw_flags_set() [1] struct fib_alias { struct hlist_node fa_list; /* 0 16 */ struct fib_info * fa_info; /* 16 8 */ u8 fa_tos; /* 24 1 */ u8 fa_type; /* 25 1 */ u8 fa_state; /* 26 1 */ u8 fa_slen; /* 27 1 */ u32 tb_id; /* 28 4 */ s16 fa_default; /* 32 2 */ u8 offload:1; /* 34: 0 1 */ u8 trap:1; /* 34: 1 1 */ u8 unused:6; /* 34: 2 1 */ /* XXX 5 bytes hole, try to pack */ struct callback_head rcu __attribute__((__aligned__(8))); /* 40 16 */ /* size: 56, cachelines: 1, members: 12 */ /* sum members: 50, holes: 1, sum holes: 5 */ /* sum bitfield members: 8 bits (1 bytes) */ /* forced alignments: 1, forced holes: 1, sum forced holes: 5 */ /* last cacheline: 56 bytes */ } __attribute__((__aligned__(8))); Signed-off-by: -
Ido Schimmel authored
fib_dump_info() is used to prepare RTM_{NEW,DEL}ROUTE netlink messages using the passed arguments. Currently, the function takes 11 arguments, 6 of which are attributes of the route being dumped (e.g., prefix, TOS). The next patch will need the function to also dump to user space an indication if the route is present in hardware or not. Instead of passing yet another argument, change the function to take a struct containing the different route attributes. v2: * Name last argument of fib_dump_info() * Move 'struct fib_rt_info' to include/net/ip_fib.h so that it could later be passed to fib_alias_hw_flags_set() Signed-off-by: -
Ido Schimmel authored
Subsequent patches will add an offload / trap indication to routes which will signal if the route is present in hardware or not. After programming the route to the hardware, drivers will have to ask the IPv4 code to set the flags by passing the route's key. In the case of route replace, the new route is notified before it is actually inserted into the FIB alias list. This can prevent simple drivers (e.g., netdevsim) that program the route to the hardware in the same context it is notified in from being able to set the flag. Solve this by first inserting the new route to the list and rollback the operation in case the route was vetoed. Signed-off-by:
-
