- 30 Apr, 2022 11 commits
-
-
David Howells authored
AF_RXRPC doesn't currently enable IPv6 UDP Tx checksums on the transport socket it opens and the checksums in the packets it generates end up 0. It probably should also enable IPv6 UDP Rx checksums and IPv4 UDP checksums. The latter only seem to be applied if the socket family is AF_INET and don't seem to apply if it's AF_INET6. IPv4 packets from an IPv6 socket seem to have checksums anyway. What seems to have happened is that the inet_inv_convert_csum() call didn't get converted to the appropriate udp_port_cfg parameters - and udp_sock_create() disables checksums unless explicitly told not too. Fix this by enabling the three udp_port_cfg checksum options. Fixes: 1a9b86c9 ("rxrpc: use udp tunnel APIs instead of open code in rxrpc_open_socket") Reported-by:
Marc Dionne <marc.dionne@auristor.com> Signed-off-by:
David Howells <dhowells@redhat.com> Reviewed-by:
Xin Long <lucien.xin@gmail.com> Reviewed-by:
David S. Miller <davem@davemloft.net>
-
Yang Yingliang authored
'tmp_node' need be put before returning from cpsw_probe_dt(), so add missing of_node_put() in error path. Fixes: ed3525ed ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac") Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
-
Yang Yingliang authored
The node pointer returned by of_get_child_by_name() with refcount incremented, so add of_node_put() after using it. Fixes: 634db83b ("net: stmmac: dwmac-sun8i: Handle integrated/external MDIOs") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Yang Yingliang authored
Add of_node_put() if of_get_phy_mode() fails in mt7530_setup() Fixes: 0c65b2b9 ("net: of_get_phy_mode: Change API to solve int/unit warnings") Reported-by:
-
Arun Ramadoss authored
This patch limits the sniffing to only one port during the mirror add. And during the mirror_del it checks for all the ports using the sniff, if and only if no other ports are referring, sniffing is disabled. The code is updated based on the review comments of LAN937x port mirror patch. Link: https://patchwork.kernel.org/project/netdevbpf/patch/20210422094257.1641396-8-prasanna.vengateshan@microchip.com/ Fixes: b987e98e ("dsa: add DSA switch driver for Microchip KSZ9477") Signed-off-by:
Prasanna Vengateshan <prasanna.vengateshan@microchip.com> Signed-off-by:
Arun Ramadoss <arun.ramadoss@microchip.com> Link: https://lore.kernel.org/r/20220428070709.7094-1-arun.ramadoss@microchip.comSigned-off-by:
-
Qiao Ma authored
If wq has only one page, we need to check wqe rolling over page by compare end_idx and curr_idx, and then copy wqe to shadow wqe to avoid out of bound access. This work has been done in hinic_get_wqe, but missed for hinic_read_wqe. This patch fixes it, and removes unnecessary MASKED_WQE_IDX(). Fixes: 7dd29ee1 ("hinic: add sriov feature support") Signed-off-by:
Qiao Ma <mqaio@linux.alibaba.com> Reviewed-by:
Xunlei Pang <xlpang@linux.alibaba.com> Link: https://lore.kernel.org/r/282817b0e1ae2e28fdf3ed8271a04e77f57bf42e.1651148587.git.mqaio@linux.alibaba.comSigned-off-by:
-
Niels Dossche authored
Error values inside the probe function must be < 0. The ENOMEM return value has the wrong sign: it is positive instead of negative. Add a minus sign. Fixes: e2397567 ("net: mdio: Add BCM6368 MDIO mux bus controller") Signed-off-by:
Niels Dossche <dossche.niels@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220428211931.8130-1-dossche.niels@gmail.comSigned-off-by:
-
Yang Yingliang authored
The node pointer returned by of_parse_phandle() with refcount incremented, so add of_node_put() after using it in mtk_sgmii_init(). Fixes: 9ffee4a8 ("net: ethernet: mediatek: Extend SGMII related functions") Signed-off-by:
-
Jakub Kicinski authored
Hangbin Liu says: ==================== selftests: net: add missing tests to Makefile When generating the selftests to another folder, the fixed tests are missing as they are not in Makefile. The missing tests are generated by command: $ for f in $(ls *.sh); do grep -q $f Makefile || echo $f; done ==================== Link: https://lore.kernel.org/r/20220428044511.227416-1-liuhangbin@gmail.comSigned-off-by:
-
Hangbin Liu authored
When generating the selftests to another folder, the fixed tests are missing as they are not in Makefile, e.g. make -C tools/testing/selftests/ install \ TARGETS="net/forwarding" INSTALL_PATH=/tmp/kselftests Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Hangbin Liu authored
When generating the selftests to another folder, the fixed tests are missing as they are not in Makefile, e.g. make -C tools/testing/selftests/ install \ TARGETS="net" INSTALL_PATH=/tmp/kselftests Signed-off-by:
-
- 29 Apr, 2022 6 commits
-
-
Jakub Kicinski authored
Merge tag 'linux-can-fixes-for-5.18-20220429' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2022-04-29 The first patch is by Oliver Hartkopp and removes the ability to re-binding bounds sockets from the ISOTP. It turned out to be not needed and brings unnecessary complexity. The last 4 patches all target the grcan driver. Duoming Zhou's patch fixes a potential dead lock in the grcan_close() function. Daniel Hellstrom's patch fixes the dma_alloc_coherent() to use the correct device. Andreas Larsson's 1st patch fixes a broken system id check, the 2nd patch fixes the NAPI poll budget usage. * tag 'linux-can-fixes-for-5.18-20220429' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: grcan: only use the NAPI poll budget for RX can: grcan: grcan_probe(): fix broken system id check for errata workaround needs can: grcan: use ofdev->dev when allocating DMA memory can: grcan: grcan_close(): fix deadlock can: isotp: remove re-binding of bound socket ==================== Link: https://lore.kernel.org/r/20220429125612.1792561-1-mkl@pengutronix.deSigned-off-by:
-
Andreas Larsson authored
The previous split budget between TX and RX made it return not using the entire budget but at the same time not having calling called napi_complete. This sometimes led to the poll to not be called, and at the same time having TX and RX interrupts disabled resulting in the driver getting stuck. Fixes: 6cec9b07 ("can: grcan: Add device driver for GRCAN and GRHCAN cores") Link: https://lore.kernel.org/all/20220429084656.29788-4-andreas@gaisler.com Cc: stable@vger.kernel.org Signed-off-by:
Andreas Larsson <andreas@gaisler.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Andreas Larsson authored
The systemid property was checked for in the wrong place of the device tree and compared to the wrong value. Fixes: 6cec9b07 ("can: grcan: Add device driver for GRCAN and GRHCAN cores") Link: https://lore.kernel.org/all/20220429084656.29788-3-andreas@gaisler.com Cc: stable@vger.kernel.org Signed-off-by:
-
Daniel Hellstrom authored
Use the device of the device tree node should be rather than the device of the struct net_device when allocating DMA buffers. The driver got away with it on sparc32 until commit 53b7670e ("sparc: factor the dma coherent mapping into helper") after which the driver oopses. Fixes: 6cec9b07 ("can: grcan: Add device driver for GRCAN and GRHCAN cores") Link: https://lore.kernel.org/all/20220429084656.29788-2-andreas@gaisler.com Cc: stable@vger.kernel.org Signed-off-by:
Daniel Hellstrom <daniel@gaisler.com> Signed-off-by:
-
Duoming Zhou authored
There are deadlocks caused by del_timer_sync(&priv->hang_timer) and del_timer_sync(&priv->rr_timer) in grcan_close(), one of the deadlocks are shown below: (Thread 1) | (Thread 2) | grcan_reset_timer() grcan_close() | mod_timer() spin_lock_irqsave() //(1) | (wait a time) ... | grcan_initiate_running_reset() del_timer_sync() | spin_lock_irqsave() //(2) (wait timer to stop) | ... We hold priv->lock in position (1) of thread 1 and use del_timer_sync() to wait timer to stop, but timer handler also need priv->lock in position (2) of thread 2. As a result, grcan_close() will block forever. This patch extracts del_timer_sync() from the protection of spin_lock_irqsave(), which could let timer handler to obtain the needed lock. Link: https://lore.kernel.org/all/20220425042400.66517-1-duoming@zju.edu.cn Fixes: 6cec9b07 ("can: grcan: Add device driver for GRCAN and GRHCAN cores") Cc: stable@vger.kernel.org Signed-off-by:Duoming Zhou <duoming@zju.edu.cn> Reviewed-by:
-
Oliver Hartkopp authored
As a carry over from the CAN_RAW socket (which allows to change the CAN interface while mantaining the filter setup) the re-binding of the CAN_ISOTP socket needs to take care about CAN ID address information and subscriptions. It turned out that this feature is so limited (e.g. the sockopts remain fix) that it finally has never been needed/used. In opposite to the stateless CAN_RAW socket the switching of the CAN ID subscriptions might additionally lead to an interrupted ongoing PDU reception. So better remove this unneeded complexity. Fixes: e057dd3f ("can: add ISO 15765-2:2016 transport protocol") Link: https://lore.kernel.org/all/20220422082337.1676-1-socketcan@hartkopp.net Cc: stable@vger.kernel.org Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
-
- 28 Apr, 2022 21 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from bluetooth, bpf and netfilter. Current release - new code bugs: - bridge: switchdev: check br_vlan_group() return value - use this_cpu_inc() to increment net->core_stats, fix preempt-rt Previous releases - regressions: - eth: stmmac: fix write to sgmii_adapter_base Previous releases - always broken: - netfilter: nf_conntrack_tcp: re-init for syn packets only, resolving issues with TCP fastopen - tcp: md5: fix incorrect tcp_header_len for incoming connections - tcp: fix F-RTO may not work correctly when receiving DSACK - tcp: ensure use of most recently sent skb when filling rate samples - tcp: fix potential xmit stalls caused by TCP_NOTSENT_LOWAT - virtio_net: fix wrong buf address calculation when using xdp - xsk: fix forwarding when combining copy mode with busy poll - xsk: fix possible crash when multiple sockets are created - bpf: lwt: fix crash when using bpf_skb_set_tunnel_key() from bpf_xmit lwt hook - sctp: null-check asoc strreset_chunk in sctp_generate_reconf_event - wireguard: device: check for metadata_dst with skb_valid_dst() - netfilter: update ip6_route_me_harder to consider L3 domain - gre: make o_seqno start from 0 in native mode - gre: switch o_seqno to atomic to prevent races in collect_md mode Misc: - add Eric Dumazet to networking maintainers - dt: dsa: realtek: remove realtek,rtl8367s string - netfilter: flowtable: Remove the empty file" * tag 'net-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits) tcp: fix F-RTO may not work correctly when receiving DSACK Revert "ibmvnic: Add ethtool private flag for driver-defined queue limits" net: enetc: allow tc-etf offload even with NETIF_F_CSUM_MASK ixgbe: ensure IPsec VF<->PF compatibility MAINTAINERS: Update BNXT entry with firmware files netfilter: nft_socket: only do sk lookups when indev is available net: fec: add missing of_node_put() in fec_enet_init_stop_mode() bnx2x: fix napi API usage sequence tls: Skip tls_append_frag on zero copy size Add Eric Dumazet to networking maintainers netfilter: conntrack: fix udp offload timeout sysctl netfilter: nf_conntrack_tcp: re-init for syn packets only net: dsa: lantiq_gswip: Don't set GSWIP_MII_CFG_RMII_CLK net: Use this_cpu_inc() to increment net->core_stats Bluetooth: hci_sync: Cleanup hci_conn if it cannot be aborted Bluetooth: hci_event: Fix creating hci_conn object on error status Bluetooth: hci_event: Fix checking for invalid handle on error status ice: fix use-after-free when deinitializing mailbox snapshot ice: wait 5 s for EMP reset after firmware flash ice: Protect vf_state check by cfg_lock in ice_vc_process_vf_msg() ... -
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull thermal control fixes from Rafael Wysocki: "These take back recent chages that started to confuse users and fix up an attr.show callback prototype in a driver. Specifics: - Stop warning about deprecation of the userspace thermal governor and cooling device status interface, because there are cases in which user space has to drive thermal management with the help of them (Daniel Lezcano) - Fix attr.show callback prototype in the int340x thermal driver (Kees Cook)" * tag 'thermal-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal/governor: Remove deprecated information Revert "thermal/core: Deprecate changing cooling device state from userspace" thermal: int340x: Fix attr.show callback prototype -
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael Wysocki: "These fix up recent intel_idle driver changes and fix some ARM cpufreq driver issues. Specifics: - Fix issues with the Qualcomm's cpufreq driver (Dmitry Baryshkov, Vladimir Zapolskiy). - Fix memory leak with the Sun501 driver (Xiaobing Luo). - Make intel_idle enable C1E promotion on all CPUs when C1E is preferred to C1 (Artem Bityutskiy). - Make C6 optimization on Sapphire Rapids added recently work as expected if both C1E and C1 are "preferred" (Artem Bityutskiy)" * tag 'pm-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: intel_idle: Fix SPR C6 optimization intel_idle: Fix the 'preferred_cstates' module parameter cpufreq: qcom-cpufreq-hw: Clear dcvs interrupts cpufreq: fix memory leak in sun50i_cpufreq_nvmem_probe cpufreq: qcom-cpufreq-hw: Fix throttle frequency value on EPSS platforms cpufreq: qcom-hw: provide online/offline operations cpufreq: qcom-hw: fix the opp entries refcounting cpufreq: qcom-hw: fix the race between LMH worker and cpuhp cpufreq: qcom-hw: drop affinity hint before freeing the IRQ -
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI fixes from Rafael WysockiL "These fix up the ACPI processor driver after a change made during the 5.16 cycle that inadvertently broke falling back to shallower C-states when C3 cannot be used. Specifics: - Make the ACPI processor driver avoid falling back to C3 type of C-states when C3 cannot be requested (Ville Syrjälä) - Revert a quirk that is not necessary any more after fixing the underlying issue properly (Ville Syrjälä)" * tag 'acpi-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "ACPI: processor: idle: fix lockup regression on 32-bit ThinkPad T40" ACPI: processor: idle: Avoid falling back to C3 type C-states -
Linus Torvalds authored
Merge tag 'platform-drivers-x86-v5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "Highlights: - asus-wmi bug-fixes - intel-sdsu bug-fixes - build (warning) fixes - couple of hw-id additions" * tag 'platform-drivers-x86-v5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86/intel: pmc/core: change pmc_lpm_modes to static platform/x86/intel/sdsi: Fix bug in multi packet reads platform/x86/intel/sdsi: Poll on ready bit for writes platform/x86/intel/sdsi: Handle leaky bucket platform/x86: intel-uncore-freq: Prevent driver loading in guests platform/x86: gigabyte-wmi: added support for B660 GAMING X DDR4 motherboard platform/x86: dell-laptop: Add quirk entry for Latitude 7520 platform/x86: asus-wmi: Fix driver not binding when fan curve control probe fails platform/x86: asus-wmi: Potential buffer overflow in asus_wmi_evaluate_method_buf() tools/power/x86/intel-speed-select: fix build failure when using -Wl,--as-needed
-
Linus Torvalds authored
Merge tag 'regulator-fix-v5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fix from Mark Brown: "A minor fix for the DT binding documentation of the rt5190a driver" * tag 'regulator-fix-v5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: dt-bindings: Revise the rt5190a buck/ldo description
-
Pengcheng Yang authored
Currently DSACK is regarded as a dupack, which may cause F-RTO to incorrectly enter "loss was real" when receiving DSACK. Packetdrill to demonstrate: // Enable F-RTO and TLP 0 `sysctl -q net.ipv4.tcp_frto=2` 0 `sysctl -q net.ipv4.tcp_early_retrans=3` 0 `sysctl -q net.ipv4.tcp_congestion_control=cubic` // Establish a connection +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 // RTT 10ms, RTO 210ms +.1 < S 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7> +0 > S. 0:0(0) ack 1 <...> +.01 < . 1:1(0) ack 1 win 257 +0 accept(3, ..., ...) = 4 // Send 2 data segments +0 write(4, ..., 2000) = 2000 +0 > P. 1:2001(2000) ack 1 // TLP +.022 > P. 1001:2001(1000) ack 1 // Continue to send 8 data segments +0 write(4, ..., 10000) = 10000 +0 > P. 2001:10001(8000) ack 1 // RTO +.188 > . 1:1001(1000) ack 1 // The original data is acked and new data is sent(F-RTO step 2.b) +0 < . 1:1(0) ack 2001 win 257 +0 > P. 10001:12001(2000) ack 1 // D-SACK caused by TLP is regarded as a dupack, this results in // the incorrect judgment of "loss was real"(F-RTO step 3.a) +.022 < . 1:1(0) ack 2001 win 257 <sack 1001:2001,nop,nop> // Never-retransmitted data(3001:4001) are acked and // expect to switch to open state(F-RTO step 3.b) +0 < . 1:1(0) ack 4001 win 257 +0 %{ assert tcpi_ca_state == 0, tcpi_ca_state }% Fixes: e33099f9 ("tcp: implement RFC5682 F-RTO") Signed-off-by:Pengcheng Yang <yangpc@wangsu.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Tested-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/1650967419-2150-1-git-send-email-yangpc@wangsu.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Fix incorrect TCP connection tracking window reset for non-syn packets, from Florian Westphal. 2) Incorrect dependency on CONFIG_NFT_FLOW_OFFLOAD, from Volodymyr Mytnyk. 3) Fix nft_socket from the output path, from Florian Westphal. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nft_socket: only do sk lookups when indev is available netfilter: conntrack: fix udp offload timeout sysctl netfilter: nf_conntrack_tcp: re-init for syn packets only ==================== Link: https://lore.kernel.org/r/20220428142109.38726-1-pablo@netfilter.orgSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2Linus Torvalds authored
Pull gfs2 fix from Andreas Gruenbacher: - No short reads or writes upon glock contention * tag 'gfs2-v5.18-rc4-fix2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: No short reads or writes upon glock contention
-
Dany Madden authored
This reverts commit 723ad916 When client requests channel or ring size larger than what the server can support the server will cap the request to the supported max. So, the client would not be able to successfully request resources that exceed the server limit. Fixes: 723ad916 ("ibmvnic: Add ethtool private flag for driver-defined queue limits") Signed-off-by:
Dany Madden <drt@linux.ibm.com> Link: https://lore.kernel.org/r/20220427235146.23189-1-drt@linux.ibm.comSigned-off-by:
-
Vladimir Oltean authored
The Time-Specified Departure feature is indeed mutually exclusive with TX IP checksumming in ENETC, but TX checksumming in itself is broken and was removed from this driver in commit 82728b91 ("enetc: Remove Tx checksumming offload code"). The blamed commit declared NETIF_F_HW_CSUM in dev->features to comply with software TSO's expectations, and still did the checksumming in software by calling skb_checksum_help(). So there isn't any restriction for the Time-Specified Departure feature. However, enetc_setup_tc_txtime() doesn't understand that, and blindly looks for NETIF_F_CSUM_MASK. Instead of checking for things which can literally never happen in the current code base, just remove the check and let the driver offload tc-etf qdiscs. Fixes: acede3c5 ("net: enetc: declare NETIF_F_HW_CSUM and do it in software") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220427203017.1291634-1-vladimir.oltean@nxp.comSigned-off-by:
-
Leon Romanovsky authored
The VF driver can forward any IPsec flags and such makes the function is not extendable and prone to backward/forward incompatibility. If new software runs on VF, it won't know that PF configured something completely different as it "knows" only XFRM_OFFLOAD_INBOUND flag. Fixes: eda0333a ("ixgbe: add VF IPsec management") Reviewed-by:
Raed Salem <raeds@nvidia.com> Signed-off-by:
Leon Romanovsky <leonro@nvidia.com> Reviewed-by:
Shannon Nelson <snelson@pensando.io> Tested-by:
Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220427173152.443102-1-anthony.l.nguyen@intel.comSigned-off-by:
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fixes from Dave Chinner: - define buffer bit flags as unsigned to fix gcc-5 + c11 warnings - remove redundant XFS fields from MAINTAINERS - fix inode buffer locking order regression * tag 'xfs-5.18-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: reorder iunlink remove operation in xfs_ifree MAINTAINERS: update IOMAP FILESYSTEM LIBRARY and XFS FILESYSTEM xfs: convert buffer flags to unsigned.
-
Florian Fainelli authored
There appears to be a maintainer gap for BNXT TEE firmware files which causes some patches to be missed. Update the entry for the BNXT Ethernet controller with its companion firmware files. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20220427163606.126154-1-f.fainelli@gmail.comSigned-off-by:
-
Rafael J. Wysocki authored
Merge a fix for the attr.show callback prototype in the int340x thermal driver (Kees Cook). * thermal-int340x: thermal: int340x: Fix attr.show callback prototype
-
Florian Westphal authored
Check if the incoming interface is available and NFT_BREAK in case neither skb->sk nor input device are set. Because nf_sk_lookup_slow*() assume packet headers are in the 'in' direction, use in postrouting is not going to yield a meaningful result. Same is true for the forward chain, so restrict the use to prerouting, input and output. Use in output work if a socket is already attached to the skb. Fixes: 554ced0a ("netfilter: nf_tables: add support for native socket matching") Reported-and-tested-by:
Topi Miettinen <toiwoton@gmail.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Rafael J. Wysocki authored
Merge cpuidle fixes for 5.18-rc5: - Make intel_idle enable C1E promotion on all CPUs when C1E is preferred to C1 (Artem Bityutskiy). - Make C6 optimization on Sapphire Rapids added recently work as expected if both C1E and C1 are "preferred" (Artem Bityutskiy). * pm-cpuidle: intel_idle: Fix SPR C6 optimization intel_idle: Fix the 'preferred_cstates' module parameter
-
Andreas Gruenbacher authored
Commit 00bfe02f ("gfs2: Fix mmap + page fault deadlocks for buffered I/O") changed gfs2_file_read_iter() and gfs2_file_buffered_write() to allow dropping the inode glock while faulting in user buffers. When the lock was dropped, a short result was returned to indicate that the operation was interrupted. As pointed out by Linus (see the link below), this behavior is broken and the operations should always re-acquire the inode glock and resume the operation instead. Link: https://lore.kernel.org/lkml/CAHk-=whaz-g_nOOoo8RRiWNjnv2R+h6_xk2F1J4TuSRxk1MtLw@mail.gmail.com/ Fixes: 00bfe02f ("gfs2: Fix mmap + page fault deadlocks for buffered I/O") Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothPaolo Abeni authored
Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - Fix regression causing some HCI events to be discarded when they shouldn't. * tag 'for-net-2022-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: hci_sync: Cleanup hci_conn if it cannot be aborted Bluetooth: hci_event: Fix creating hci_conn object on error status Bluetooth: hci_event: Fix checking for invalid handle on error status ==================== Link: https://lore.kernel.org/r/20220427234031.1257281-1-luiz.dentz@gmail.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Yang Yingliang authored
Put device node in error path in fec_enet_init_stop_mode(). Fixes: 8a448bf8 ("net: ethernet: fec: move GPR register offset and bit into DT") Signed-off-by:
-
Manish Chopra authored
While handling PCI errors (AER flow) driver tries to disable NAPI [napi_disable()] after NAPI is deleted [__netif_napi_del()] which causes unexpected system hang/crash. System message log shows the following: ======================================= [ 3222.537510] EEH: Detected PCI bus error on PHB#384-PE#800000 [ 3222.537511] EEH: This PCI device has failed 2 times in the last hour and will be permanently disabled after 5 failures. [ 3222.537512] EEH: Notify device drivers to shutdown [ 3222.537513] EEH: Beginning: 'error_detected(IO frozen)' [ 3222.537514] EEH: PE#800000 (PCI 0384:80:00.0): Invoking bnx2x->error_detected(IO frozen) [ 3222.537516] bnx2x: [bnx2x_io_error_detected:14236(eth14)]IO error detected [ 3222.537650] EEH: PE#800000 (PCI 0384:80:00.0): bnx2x driver reports: 'need reset' [ 3222.537651] EEH: PE#800000 (PCI 0384:80:00.1): Invoking bnx2x->error_detected(IO frozen) [ 3222.537651] bnx2x: [bnx2x_io_error_detected:14236(eth13)]IO error detected [ 3222.537729] EEH: PE#800000 (PCI 0384:80:00.1): bnx2x driver reports: 'need reset' [ 3222.537729] EEH: Finished:'error_detected(IO frozen)' with aggregate recovery state:'need reset' [ 3222.537890] EEH: Collect temporary log [ 3222.583481] EEH: of node=0384:80:00.0 [ 3222.583519] EEH: PCI device/vendor: 168e14e4 [ 3222.583557] EEH: PCI cmd/status register: 00100140 [ 3222.583557] EEH: PCI-E capabilities and status follow: [ 3222.583744] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.583892] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.583893] EEH: PCI-E 20: 00000000 [ 3222.583893] EEH: PCI-E AER capability register set follows: [ 3222.584079] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.584230] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.584378] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.584416] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.584416] EEH: of node=0384:80:00.1 [ 3222.584454] EEH: PCI device/vendor: 168e14e4 [ 3222.584491] EEH: PCI cmd/status register: 00100140 [ 3222.584492] EEH: PCI-E capabilities and status follow: [ 3222.584677] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.584825] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.584826] EEH: PCI-E 20: 00000000 [ 3222.584826] EEH: PCI-E AER capability register set follows: [ 3222.585011] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.585160] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.585309] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.585347] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.586872] RTAS: event: 5, Type: Platform Error (224), Severity: 2 [ 3222.586873] EEH: Reset without hotplug activity [ 3224.762767] EEH: Beginning: 'slot_reset' [ 3224.762770] EEH: PE#800000 (PCI 0384:80:00.0): Invoking bnx2x->slot_reset() [ 3224.762771] bnx2x: [bnx2x_io_slot_reset:14271(eth14)]IO slot reset initializing... [ 3224.762887] bnx2x 0384:80:00.0: enabling device (0140 -> 0142) [ 3224.768157] bnx2x: [bnx2x_io_slot_reset:14287(eth14)]IO slot reset --> driver unload Uninterruptible tasks ===================== crash> ps | grep UN 213 2 11 c000000004c89e00 UN 0.0 0 0 [eehd] 215 2 0 c000000004c80000 UN 0.0 0 0 [kworker/0:2] 2196 1 28 c000000004504f00 UN 0.1 15936 11136 wickedd 4287 1 9 c00000020d076800 UN 0.0 4032 3008 agetty 4289 1 20 c00000020d056680 UN 0.0 7232 3840 agetty 32423 2 26 c00000020038c580 UN 0.0 0 0 [kworker/26:3] 32871 4241 27 c0000002609ddd00 UN 0.1 18624 11648 sshd 32920 10130 16 c00000027284a100 UN 0.1 48512 12608 sendmail 33092 32987 0 c000000205218b00 UN 0.1 48512 12608 sendmail 33154 4567 16 c000000260e51780 UN 0.1 48832 12864 pickup 33209 4241 36 c000000270cb6500 UN 0.1 18624 11712 sshd 33473 33283 0 c000000205211480 UN 0.1 48512 12672 sendmail 33531 4241 37 c00000023c902780 UN 0.1 18624 11648 sshd EEH handler hung while bnx2x sleeping and holding RTNL lock =========================================================== crash> bt 213 PID: 213 TASK: c000000004c89e00 CPU: 11 COMMAND: "eehd" #0 [c000000004d477e0] __schedule at c000000000c70808 #1 [c000000004d478b0] schedule at c000000000c70ee0 #2 [c000000004d478e0] schedule_timeout at c000000000c76dec #3 [c000000004d479c0] msleep at c0000000002120cc #4 [c000000004d479f0] napi_disable at c000000000a06448 ^^^^^^^^^^^^^^^^ #5 [c000000004d47a30] bnx2x_netif_stop at c0080000018dba94 [bnx2x] #6 [c000000004d47a60] bnx2x_io_slot_reset at c0080000018a551c [bnx2x] #7 [c000000004d47b20] eeh_report_reset at c00000000004c9bc #8 [c000000004d47b90] eeh_pe_report at c00000000004d1a8 #9 [c000000004d47c40] eeh_handle_normal_event at c00000000004da64 And the sleeping source code ============================ crash> dis -ls c000000000a06448 FILE: ../net/core/dev.c LINE: 6702 6697 { 6698 might_sleep(); 6699 set_bit(NAPI_STATE_DISABLE, &n->state); 6700 6701 while (test_and_set_bit(NAPI_STATE_SCHED, &n->state)) * 6702 msleep(1); 6703 while (test_and_set_bit(NAPI_STATE_NPSVC, &n->state)) 6704 msleep(1); 6705 6706 hrtimer_cancel(&n->timer); 6707 6708 clear_bit(NAPI_STATE_DISABLE, &n->state); 6709 } EEH calls into bnx2x twice based on the system log above, first through bnx2x_io_error_detected() and then bnx2x_io_slot_reset(), and executes the following call chains: bnx2x_io_error_detected() +-> bnx2x_eeh_nic_unload() +-> bnx2x_del_all_napi() +-> __netif_napi_del() bnx2x_io_slot_reset() +-> bnx2x_netif_stop() +-> bnx2x_napi_disable() +->napi_disable() Fix this by correcting the sequence of NAPI APIs usage, that is delete the NAPI after disabling it. Fixes: 7fa6f340 ("bnx2x: AER revised") Reported-by:David Christensen <drc@linux.vnet.ibm.com> Tested-by:
Manish Chopra <manishc@marvell.com> Signed-off-by:
Ariel Elior <aelior@marvell.com> Link: https://lore.kernel.org/r/20220426153913.6966-1-manishc@marvell.comSigned-off-by:
-
- 27 Apr, 2022 2 commits
-
-
Maxim Mikityanskiy authored
Calling tls_append_frag when max_open_record_len == record->len might add an empty fragment to the TLS record if the call happens to be on the page boundary. Normally tls_append_frag coalesces the zero-sized fragment to the previous one, but not if it's on page boundary. If a resync happens then, the mlx5 driver posts dump WQEs in tx_post_resync_dump, and the empty fragment may become a data segment with byte_count == 0, which will confuse the NIC and lead to a CQE error. This commit fixes the described issue by skipping tls_append_frag on zero size to avoid adding empty fragments. The fix is not in the driver, because an empty fragment is hardly the desired behavior. Fixes: e8f69799 ("net/tls: Add generic NIC offload infrastructure") Signed-off-by:
Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20220426154949.159055-1-maximmi@nvidia.comSigned-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf 2022-04-27 We've added 5 non-merge commits during the last 20 day(s) which contain a total of 6 files changed, 34 insertions(+), 12 deletions(-). The main changes are: 1) Fix xsk sockets when rx and tx are separately bound to the same umem, also fix xsk copy mode combined with busy poll, from Maciej Fijalkowski. 2) Fix BPF tunnel/collect_md helpers with bpf_xmit lwt hook usage which triggered a crash due to invalid metadata_dst access, from Eyal Birger. 3) Fix release of page pool in XDP live packet mode, from Toke Høiland-Jørgensen. 4) Fix potential NULL pointer dereference in kretprobes, from Adam Zabrocki. (Masami & Steven preferred this small fix to be routed via bpf tree given it's follow-up fix to Masami's rethook work that went via bpf earlier, too.) * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: xsk: Fix possible crash when multiple sockets are created kprobes: Fix KRETPROBES when CONFIG_KRETPROBE_ON_RETHOOK is set bpf, lwt: Fix crash when using bpf_skb_set_tunnel_key() from bpf_xmit lwt hook bpf: Fix release of page_pool in BPF_PROG_RUN in test runner xsk: Fix l2fwd for copy mode + busy poll combo ==================== Link: https://lore.kernel.org/r/20220427212748.9576-1-daniel@iogearbox.netSigned-off-by:
-
