The ast HW cursor requires the primary plane and CRTC to display at
a valid mode and format. This is not the case while switching
display modes, which can lead to the screen turing permanently dark.

As a workaround, the ast driver now disables active planes while the
mode or format switch takes place. It also synchronizes with the vertical
refresh to give CRTC and planes some time to catch up on each other.
The active planes planes (primary or cursor) will be re-enabled by
each plane's atomic_update() function.

v3:
	* move the logic into the CRTC's atomic_disable function
v2:
	* move the logic into the commit-tail function
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200914072236.19398-3-tzimmermann@suse.de

The atomic modesetting code tried to distinguish format changes from
full modesetting operations. But the implementation was buggy and the
format registers were often updated even for simple pageflips.

Fix this problem by handling format changes in the primary plane's
update function.

v3:
	* program format in primary plane's update function
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200914072236.19398-2-tzimmermann@suse.de

I'm adding myself as reviewer for ast, mgag200 and udl. I've already
been keeping these drivers in shape for a while.

While at it I'm also setting the list and tree for ast and mgag200,
and update each driver's status to Supported. Working on these drivers
is part of my job.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915071708.4743-1-tzimmermann@suse.de

The lcdif IP does not support a framebuffer pitch (stride) other than
framebuffer width. Check for equality and reject the framebuffer
otherwise.

This prevents a distorted picture when using 640x800 and running the
Mesa graphics stack. Mesa tries to use a cache aligned stride, which
leads at that particular resolution to width != stride. Currently
Mesa has no fallback behavior, but rejecting this configuration allows
userspace to handle the issue correctly.

Fixes: 45d59d70 ("drm: Add new driver for MXSFB controller")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200908141654.266836-1-stefan@agner.ch

Handing the return value of drm_universal_plane_init to fix the following
W=1 kernel build warning(s):
vc4_plane.c: In function ‘vc4_plane_init’:
vc4_plane.c:1340:6: warning: variable ‘ret’ set but not
used [-Wunused-but-set-variable]
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1599811777-34093-1-git-send-email-tiantao6@hisilicon.com

Just use the top bit of page flags to store the populated state.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915024007.67163-8-airlied@gmail.com

Move bound up into the bo object, and keep populated with the tt
object.

The ghost object handling needs to follow the flags at the bo
level now instead of it being part of the ttm tt object.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915024007.67163-7-airlied@gmail.com

Move these up to the bo level, moving ttm_tt to just being
backing store. Next step is to move the bound flag out.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915024007.67163-6-airlied@gmail.com

Drivers have to call populate themselves now before binding.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915024007.67163-5-airlied@gmail.com

This just makes things easier later.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915024007.67163-4-airlied@gmail.com

All places this was called was using bo->ttm either direct
or indirectly.

v2: move to ttm_bo
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915024007.67163-3-airlied@gmail.com

This adds 2 getters and 4 setters, however unbound and populated
are currently the same thing, this will change, it also drops
a BUG_ON that seems not that useful.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915024007.67163-2-airlied@gmail.com

Instead of letting TTM make an educated guess based on
some mask all drivers should just specify what caching
they want for their CPU mappings.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/390207/

Instead of letting TTM masking the caching bits
specify directly what the driver needs.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/390206

As far as I can tell this was never used either and we just
always fallback to the order cached > wc > uncached anyway.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/390142/

The get_edid() callback can be triggered anytime by an ioctl, i.e

  drm_mode_getconnector (ioctl)
    -> drm_helper_probe_single_connector_modes
       -> drm_bridge_connector_get_modes
          -> ps8640_bridge_get_edid

Actually if the bridge pre_enable() function was not called before
get_edid(), the driver will not be able to get the EDID properly and
display will not work until a second get_edid() call is issued and if
pre_enable() is called before. The side effect of this, for example, is
that you see anything when `Frecon` starts, neither the splash screen,
until the graphical session manager starts.

To fix this we need to make sure that all we need is enabled before
reading the EDID. This means the following:

1. If get_edid() is called before having the device powered we need to
   power on the device. In such case, the driver will power off again the
   device.

2. If get_edid() is called after having the device powered, all should
   just work. We added a powered flag in order to avoid recurrent calls
   to ps8640_bridge_poweron() and unneeded delays.

3. This seems to be specific for this device, but we need to make sure
   the panel is powered on before do a power on cycle on this device.
   Otherwise the device fails to retrieve the EDID.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Bilal Wasim <bwasim.lkml@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200827085911.944899-2-enric.balletbo@collabora.com

Usually we wait for the host to complete the unref request, then cleanup
the guest-side state of the object in the completion callback.  When
submitting the unref command failed the completion callback will not be
called though, so cleanup right away.

Fixes a WARN on stale mm entries on driver shutdown.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20200908070723.6394-4-kraxel@redhat.com

In case queuing virtio commands fails (can happen when
the device got unplugged) pass up the error.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20200908070723.6394-3-kraxel@redhat.com

Use managed init call to simplify cleanup.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20200908070723.6394-2-kraxel@redhat.com

Ingenic SoCs are most notably used in cheap chinese handheld gaming
consoles. There, the games and applications generally render in software
directly into GEM buffers.

Traditionally, GEM buffers are mapped write-combine. Writes to the
buffer are accelerated, and reads are slow. Application doing lots of
alpha-blending paint inside shadow buffers, which is then memcpy'd into
the final GEM buffer.

On recent Ingenic SoCs however, it is much faster to have a fully cached
GEM buffer, in which applications paint directly, and whose data is
invalidated before scanout, than having a write-combine GEM buffer, even
when alpha blending is not used.

Add an optional 'cached_gem_buffers' parameter to the ingenic-drm driver
to allow GEM buffers to be mapped fully-cached, in order to speed up
software rendering.

v2: Use standard noncoherent DMA APIs

v3: Use damage clips instead of invalidating full frames

v4: Avoid dma_pgprot() which is not exported. Using vm_get_page_prot()
    is enough in this case.

v5:
- Avoid calling drm_gem_cma_prime_mmap(). It has the side effect that an
  extra object reference is obtained, which causes our dumb buffers to
  never be freed. It should have been drm_gem_cma_mmap_obj(). However,
  our custom mmap function only differs with one flag, so we can cleanly
  handle both modes in ingenic_drm_gem_mmap().
- Call drm_gem_vm_close() if drm_mmap_attrs() failed, just like in
  drm_gem_cma_mmap_obj().
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200912195639.176001-1-paul@crapouillou.net

We update the timestamping constants per-crtc explicitly in
intel_crtc_update_active_timings(). Furtermore the helper will
use uapi.adjusted_mode whereas we want hw.adjusted_mode. Thus
let's drop the helper call an rely on what we already have in
intel_crtc_update_active_timings(). We can now also drop the
hw.adjusted_mode -> uapi.adjusted_mode copy hack that was added
to keep the helper from deriving the timestamping constants from
the wrong thing.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200907120026.6360-3-ville.syrjala@linux.intel.comReviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/atomic-helper: Remove the timestamping constant update from drm_atomic_helper_update_legacy_modeset_state()

The timestamping constants have nothing to do with any legacy state
so should not be updated from
drm_atomic_helper_update_legacy_modeset_state().

Let's make everyone call drm_atomic_helper_calc_timestamping_constants()
directly instead of relying on
drm_atomic_helper_update_legacy_modeset_state() to call it.

@@
expression S;
@@
- drm_atomic_helper_calc_timestamping_constants(S);

@@
expression D, S;
@@
  drm_atomic_helper_update_legacy_modeset_state(D, S);
+ drm_atomic_helper_calc_timestamping_constants(S);

v2: Update drm_crtc_vblank_helper_get_vblank_timestamp{,_internal}() docs (Daniel)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200907120026.6360-2-ville.syrjala@linux.intel.comReviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Put the vblank timestamping constants update loop into its own
function. It has no business living inside
drm_atomic_helper_update_legacy_modeset_state() so we'll be wanting
to move it out entirely. As a first step we'll still call it
from drm_atomic_helper_update_legacy_modeset_state().

v2: Drop comment about 'legacy state' in the new function
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200907120026.6360-1-ville.syrjala@linux.intel.comReviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Paul Cercueil needs some patches in -rc5 to apply new patches for ingenic
properly.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Paul needs 1a21e5b9 ("drm/ingenic: Fix leak of device_node
pointer") and 3b5b005e ("drm/ingenic: Fix driver not probing when
IPU port is missing") from -fixes to be able to merge further ingenic
patches into -next.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

I got a use-after-free report when doing some fuzz test:

If ttm_bo_init() fails, the "gbo" and "gbo->bo.base" will be
freed by ttm_buffer_object_destroy() in ttm_bo_init(). But
then drm_gem_vram_create() and drm_gem_vram_init() will free
"gbo" and "gbo->bo.base" again.

BUG: KMSAN: use-after-free in drm_vma_offset_remove+0xb3/0x150
CPU: 0 PID: 24282 Comm: syz-executor.1 Tainted: G    B   W         5.7.0-rc4-msan #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
Call Trace:
 __dump_stack
 dump_stack+0x1c9/0x220
 kmsan_report+0xf7/0x1e0
 __msan_warning+0x58/0xa0
 drm_vma_offset_remove+0xb3/0x150
 drm_gem_free_mmap_offset
 drm_gem_object_release+0x159/0x180
 drm_gem_vram_init
 drm_gem_vram_create+0x7c5/0x990
 drm_gem_vram_fill_create_dumb
 drm_gem_vram_driver_dumb_create+0x238/0x590
 drm_mode_create_dumb
 drm_mode_create_dumb_ioctl+0x41d/0x450
 drm_ioctl_kernel+0x5a4/0x710
 drm_ioctl+0xc6f/0x1240
 vfs_ioctl
 ksys_ioctl
 __do_sys_ioctl
 __se_sys_ioctl+0x2e9/0x410
 __x64_sys_ioctl+0x4a/0x70
 do_syscall_64+0xb8/0x160
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x4689b9
Code: fd e0 fa ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb e0 fa ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f368fa4dc98 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 000000000076bf00 RCX: 00000000004689b9
RDX: 0000000020000240 RSI: 00000000c02064b2 RDI: 0000000000000003
RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00000000004d17e0 R14: 00007f368fa4e6d4 R15: 000000000076bf0c

Uninit was created at:
 kmsan_save_stack_with_flags
 kmsan_internal_poison_shadow+0x66/0xd0
 kmsan_slab_free+0x6e/0xb0
 slab_free_freelist_hook
 slab_free
 kfree+0x571/0x30a0
 drm_gem_vram_destroy
 ttm_buffer_object_destroy+0xc8/0x130
 ttm_bo_release
 kref_put
 ttm_bo_put+0x117d/0x23e0
 ttm_bo_init_reserved+0x11c0/0x11d0
 ttm_bo_init+0x289/0x3f0
 drm_gem_vram_init
 drm_gem_vram_create+0x775/0x990
 drm_gem_vram_fill_create_dumb
 drm_gem_vram_driver_dumb_create+0x238/0x590
 drm_mode_create_dumb
 drm_mode_create_dumb_ioctl+0x41d/0x450
 drm_ioctl_kernel+0x5a4/0x710
 drm_ioctl+0xc6f/0x1240
 vfs_ioctl
 ksys_ioctl
 __do_sys_ioctl
 __se_sys_ioctl+0x2e9/0x410
 __x64_sys_ioctl+0x4a/0x70
 do_syscall_64+0xb8/0x160
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

If ttm_bo_init() fails, the "gbo" will be freed by
ttm_buffer_object_destroy() in ttm_bo_init(). But then
drm_gem_vram_create() and drm_gem_vram_init() will free
"gbo" again.
Reported-by: Hulk Robot <hulkci@huawei.com>
Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
Signed-off-by: Jia Yang <jiayang5@huawei.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200714083238.28479-2-tzimmermann@suse.de

VRAM helpers support ref counting for pin and vmap operations, no need
to avoid these operations by employing the internal kmap interface. Just
use drm_gem_vram_vmap() and let it handle the details.

Also unexport the kmap interfaces from VRAM helpers. Vboxvideo was the
last user of these internal functions.

v2:
	* fixed a comma in commit description
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200911075922.19317-1-tzimmermann@suse.de

Pull ARM SoC fixes from Olof Johansson:
 "A collection of fixes I've been accruing over the last few weeks, none
  of them have been severe enough to warrant flushing the queue but it's
  been long enough now that it's a good idea to send them in.

  A handful of them are fixups for QSPI DT/bindings/compatibles, some
  smaller fixes for system DMA clock control and TMU interrupts on i.MX,
  a handful of fixes for OMAP, including a fix for DSI (display) on
  omap5"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (27 commits)
  arm64: dts: ns2: Fixed QSPI compatible string
  ARM: dts: BCM5301X: Fixed QSPI compatible string
  ARM: dts: NSP: Fixed QSPI compatible string
  ARM: dts: bcm: HR2: Fixed QSPI compatible string
  dt-bindings: spi: Fix spi-bcm-qspi compatible ordering
  ARM: dts: imx6sx: fix the pad QSPI1B_SCLK mux mode for uart3
  arm64: dts: imx8mp: correct sdma1 clk setting
  arm64: dts: imx8mq: Fix TMU interrupt property
  ARM: dts: imx7d-zii-rmu2: fix rgmii phy-mode for ksz9031 phy
  ARM: dts: vfxxx: Add syscon compatible with OCOTP
  ARM: dts: imx6q-logicpd: Fix broken PWM
  arm64: dts: imx: Add missing imx8mm-beacon-kit.dtb to build
  ARM: dts: imx6q-prtwd2: Remove unneeded i2c unit name
  ARM: dts: imx6qdl-gw51xx: Remove unneeded #address-cells/#size-cells
  ARM: dts: imx7ulp: Correct gpio ranges
  ARM: dts: ls1021a: fix QuadSPI-memory reg range
  arm64: defconfig: Enable ptn5150 extcon driver
  arm64: defconfig: Enable USB gadget with configfs
  ARM: configs: Update Integrator defconfig
  ARM: dts: omap5: Fix DSI base address and clocks
  ...

Pull USB/Thunderbolt fixes from Greg KH:
 "Here are some small USB and Thunderbolt driver fixes for 5.9-rc5.

  Nothing huge, just a number of bugfixes and new device ids for
  problems reported:

   - new USB serial driver ids

   - bug fixes for syzbot reported problems

   - typec driver fixes

   - thunderbolt driver fixes

   - revert of reported broken commit

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: typec: intel_pmc_mux: Do not configure SBU and HSL Orientation in Alternate modes
  usb: typec: intel_pmc_mux: Do not configure Altmode HPD High
  usb: core: fix slab-out-of-bounds Read in read_descriptors
  Revert "usb: dwc3: meson-g12a: fix shared reset control use"
  usb: typec: ucsi: acpi: Check the _DEP dependencies
  usb: typec: intel_pmc_mux: Un-register the USB role switch
  usb: Fix out of sync data toggle if a configured device is reconfigured
  USB: serial: option: support dynamic Quectel USB compositions
  USB: serial: option: add support for SIM7070/SIM7080/SIM7090 modules
  thunderbolt: Use maximum USB3 link rate when reclaiming if link is not up
  thunderbolt: Disable ports that are not implemented
  USB: serial: ftdi_sio: add IDs for Xsens Mti USB converter

Pull staging/IIO driver fixes from Greg KH:
 "Here are a number of staging and IIO driver fixes for 5.9-rc5.

  The majority of these are IIO driver fixes, to resolve a timestamp
  issue that was recently found to affect a bunch of IIO drivers.

  The other fixes in here are:

   - small IIO driver fixes

   - greybus driver fix

   - counter driver fix (came in through the IIO fixes tree)

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (23 commits)
  iio: adc: mcp3422: fix locking on error path
  iio: adc: mcp3422: fix locking scope
  iio: adc: meson-saradc: Use the parent device to look up the calib data
  iio:adc:max1118 Fix alignment of timestamp and data leak issues
  iio:adc:ina2xx Fix timestamp alignment issue.
  iio:adc:ti-adc084s021 Fix alignment and data leak issues.
  iio:adc:ti-adc081c Fix alignment and data leak issues
  iio:magnetometer:ak8975 Fix alignment and data leak issues.
  iio:light:ltr501 Fix timestamp alignment issue.
  iio:light:max44000 Fix timestamp alignment and prevent data leak.
  iio:chemical:ccs811: Fix timestamp alignment and prevent data leak.
  iio:proximity:mb1232: Fix timestamp alignment and prevent data leak.
  iio:accel:mma7455: Fix timestamp alignment and prevent data leak.
  iio:accel:bmc150-accel: Fix timestamp alignment and prevent data leak.
  iio:accel:mma8452: Fix timestamp alignment and prevent data leak.
  iio: accel: kxsd9: Fix alignment of local buffer.
  iio: adc: rockchip_saradc: select IIO_TRIGGERED_BUFFER
  iio: adc: ti-ads1015: fix conversion when CONFIG_PM is not set
  counter: microchip-tcb-capture: check the correct variable
  iio: cros_ec: Set Gyroscope default frequency to 25Hz
  ...

Pull driver core fixes from Greg KH:
 "Here are some small driver core and debugfs fixes for 5.9-rc5

  Included in here are:

   - firmware loader memory leak fix

   - firmware loader testing fixes for non-EFI systems

   - device link locking fixes found by lockdep

   - kobject_del() bugfix that has been affecting some callers

   - debugfs minor fix

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  test_firmware: Test platform fw loading on non-EFI systems
  PM: <linux/device.h>: fix @em_pd kernel-doc warning
  kobject: Drop unneeded conditional in __kobject_del()
  driver core: Fix device_pm_lock() locking for device links
  MAINTAINERS: Add the security document to SECURITY CONTACT
  driver code: print symbolic error code
  debugfs: Fix module state check condition
  kobject: Restore old behaviour of kobject_del(NULL)
  firmware_loader: fix memory leak for paged buffer

This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
5.9, please pull the following:

- Florian fixes the Broadcom QSPI controller binding such that the most
  specific compatible string is the left most one, and all existing
  in-tree users are updated as well.

* tag 'arm-soc/for-5.9/devicetree-fixes' of https://github.com/Broadcom/stblinux:
  arm64: dts: ns2: Fixed QSPI compatible string
  ARM: dts: BCM5301X: Fixed QSPI compatible string
  ARM: dts: NSP: Fixed QSPI compatible string
  ARM: dts: bcm: HR2: Fixed QSPI compatible string
  dt-bindings: spi: Fix spi-bcm-qspi compatible ordering

Link: https://lore.kernel.org/r/20200909211857.4144718-1-f.fainelli@gmail.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'imx-fixes-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 5.9, round 2:

- Fix the misspelling of 'interrupts' property in i.MX8MQ TMU DT node.
- Correct 'ahb' clock for i.MX8MP SDMA1 in device tree.
- Fix pad QSPI1B_SCLK mux mode for UART3 on i.MX6SX.

* tag 'imx-fixes-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx6sx: fix the pad QSPI1B_SCLK mux mode for uart3
  arm64: dts: imx8mp: correct sdma1 clk setting
  arm64: dts: imx8mq: Fix TMU interrupt property

Link: https://lore.kernel.org/r/20200909143844.GA25109@dragonSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v5.9/fixes-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes

Fixes for omaps for v5.9-rc cycle

Few fixes for omap based devices:

- Fix of_clk_get() error handling for omap-iommu

- Fix missing audio pinctrl entries for logicpd boards

- Fix video for logicpd-som-lv after switch to generic panels

- Fix omap5 DSI clocks base

* tag 'omap-for-v5.9/fixes-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: omap5: Fix DSI base address and clocks
  ARM: dts: logicpd-som-lv-baseboard: Fix missing video
  ARM: dts: logicpd-som-lv-baseboard: Fix broken audio
  ARM: dts: logicpd-torpedo-baseboard: Fix broken audio
  ARM: OMAP2+: Fix an IS_ERR() vs NULL check in _get_pwrdm()

Link: https://lore.kernel.org/r/pull-1599132064-54898@atomide.comSigned-off-by: Olof Johansson <olof@lixom.net>

Pull char / misc driver fixes from Greg KH:
 "Here are a number of small driver fixes for 5.9-rc5

  Included in here are:

   - habanalabs driver fixes

   - interconnect driver fixes

   - soundwire driver fixes

   - dyndbg fixes for reported issues, and then reverts to fix it all up
     to a sane state.

   - phy driver fixes

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  Revert "dyndbg: accept query terms like file=bar and module=foo"
  Revert "dyndbg: fix problem parsing format="foo bar""
  scripts/tags.sh: exclude tools directory from tags generation
  video: fbdev: fix OOB read in vga_8planes_imageblit()
  dyndbg: fix problem parsing format="foo bar"
  dyndbg: refine export, rename to dynamic_debug_exec_queries()
  dyndbg: give %3u width in pr-format, cosmetic only
  interconnect: qcom: Fix small BW votes being truncated to zero
  soundwire: fix double free of dangling pointer
  interconnect: Show bandwidth for disabled paths as zero in debugfs
  habanalabs: fix report of RAZWI initiator coordinates
  habanalabs: prevent user buff overflow
  phy: omap-usb2-phy: disable PHY charger detect
  phy: qcom-qmp: Use correct values for ipq8074 PCIe Gen2 PHY init
  soundwire: bus: fix typo in comment on INTSTAT registers
  phy: qualcomm: fix return value check in qcom_ipq806x_usb_phy_probe()
  phy: qualcomm: fix platform_no_drv_owner.cocci warnings

Pull kvm fixes from Paolo Bonzini:
 "A bit on the bigger side, mostly due to me being on vacation, then
  busy, then on parental leave, but there's nothing worrisome.

  ARM:
   - Multiple stolen time fixes, with a new capability to match x86
   - Fix for hugetlbfs mappings when PUD and PMD are the same level
   - Fix for hugetlbfs mappings when PTE mappings are enforced (dirty
     logging, for example)
   - Fix tracing output of 64bit values

  x86:
   - nSVM state restore fixes
   - Async page fault fixes
   - Lots of small fixes everywhere"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
  KVM: emulator: more strict rsm checks.
  KVM: nSVM: more strict SMM checks when returning to nested guest
  SVM: nSVM: setup nested msr permission bitmap on nested state load
  SVM: nSVM: correctly restore GIF on vmexit from nesting after migration
  x86/kvm: don't forget to ACK async PF IRQ
  x86/kvm: properly use DEFINE_IDTENTRY_SYSVEC() macro
  KVM: VMX: Don't freeze guest when event delivery causes an APIC-access exit
  KVM: SVM: avoid emulation with stale next_rip
  KVM: x86: always allow writing '0' to MSR_KVM_ASYNC_PF_EN
  KVM: SVM: Periodically schedule when unregistering regions on destroy
  KVM: MIPS: Change the definition of kvm type
  kvm x86/mmu: use KVM_REQ_MMU_SYNC to sync when needed
  KVM: nVMX: Fix the update value of nested load IA32_PERF_GLOBAL_CTRL control
  KVM: fix memory leak in kvm_io_bus_unregister_dev()
  KVM: Check the allocation of pv cpu mask
  KVM: nVMX: Update VMCS02 when L2 PAE PDPTE updates detected
  KVM: arm64: Update page shift if stage 2 block mapping not supported
  KVM: arm64: Fix address truncation in traces
  KVM: arm64: Do not try to map PUDs when they are folded into PMD
  arm64/x86: KVM: Introduce steal-time cap
  ...

Pull OpenRISC fixes from Stafford Horne:
 "Fixes for compile issues pointed out by kbuild and one bug I found in
  initrd with the 5.9 patches"

* tag 'for-linus' of git://github.com/openrisc/linux:
  openrisc: Fix issue with get_user for 64-bit values
  openrisc: Fix cache API compile issue when not inlining
  openrisc: Reserve memblock for initrd

Pull seccomp fixes from Kees Cook:
 "This fixes a rare race condition in seccomp when using TSYNC and
  USER_NOTIF together where a memory allocation would not get freed
  (found by syzkaller, fixed by Tycho).

  Additionally updates Tycho's MAINTAINERS and .mailmap entries for his
  new address"

* tag 'seccomp-v5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  seccomp: don't leave dangling ->notif if file allocation fails
  mailmap, MAINTAINERS: move to tycho.pizza
  seccomp: don't leak memory when filter install races

Pull libnvdimm fix from Vishal Verma:
 "Fix detection of dax support for block devices.

  Previous fixes in this area, which only affected printing of debug
  messages, had an incorrect condition for detection of dax. This fix
  should finally do the right thing"

* tag 'libnvdimm-fix-v5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  dax: fix detection of dax support for non-persistent memory block devices