Pull power supply and reset updates from Sebastian Reichel:
 "Nothing special for the power-supply subystem this time.

   - power-supply core: remove faulty cooling logic

   - convert all sysfs show() handlers from *printf() use sysfs_emit()

   - bq25890: add dual-charger support required by Lenovo Yoga Tab 3 Pro

   - bq27xxx: fix reporting critical level

   - syscon-reboot: add priority property support

   - new rt9467 charger driver

   - new rt9471 charger driver

   - new Odroid Go Ultra poweroff driver

   - misc minor fixes and cleanups"

* tag 'for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (32 commits)
  power: reset: odroid-go-ultra: fix I2C dependency
  power: supply: leds: explicitly include linux/leds.h
  dt-bindings: power: supply: pm8941-coincell: Don't require charging properties
  dt-bindings: power: supply: pm8941-coincell: Add PM8998 compatible
  power: reset: add Odroid Go Ultra poweroff driver
  power: supply: rt9467: Fix spelling mistake "attache" -> "attach"
  power: supply: rt9471: fix using wrong ce_gpio in rt9471_probe()
  power: supply: max77650: Make max77650_charger_disable() return void
  Documentation: power: rt9467: Document exported sysfs entries
  power: supply: rt9467: Add Richtek RT9467 charger driver
  dt-bindings: power: supply: Add Richtek RT9467 battery charger
  Documentation: power: rt9471: Document exported sysfs entries
  power: supply: rt9471: Add Richtek RT9471 charger driver
  dt-bindings: power: supply: Add Richtek RT9471 battery charger
  power: supply: max1721x: Use strscpy() is more robust and safer
  power: supply: test-power: use strscpy() instead of strncpy()
  power: supply: bq27xxx: fix reporting critical level
  power: supply: bq256xx: Init ichg/vbat value with chip default value
  power: supply: collie_battery: Convert to GPIO descriptors (part 2)
  power: supply: remove faulty cooling logic
  ...

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:

   - Rework portdrv shutdown so it disables interrupts but doesn't
     disable bus mastering, which leads to hangs on Loongson LS7A

   - Add mechanism to prevent Max_Read_Request_Size (MRRS) increases,
     again to avoid hardware issues on Loongson LS7A (and likely other
     devices based on DesignWare IP)

   - Ignore devices with a firmware (DT or ACPI) node that says the
     device is disabled

  Resource management:

   - Distribute spare resources to unconfigured hotplug bridges at
     boot-time (not just when hot-adding such a bridge), which makes
     hot-adding devices to docks work better. Tried this in v6.1 but had
     to revert for regressions, so try again

   - Fix root bus issue that dropped resources that happened to end
     at 0, e.g., [bus 00]

  PCI device hotplug:

   - Remove device locking when marking device as disconnected so this
     doesn't have to wait for concurrent driver bind/unbind to complete

   - Quirk more Qualcomm bridges that don't fully implement the PCIe
     Slot Status 'Command Completed' bit

  Power management:

   - Account for _S0W of the target bridge in acpi_pci_bridge_d3() so we
     don't miss hot-add notifications for USB4 docks, Thunderbolt, etc

  Reset:

   - Observe delay after reset, e.g., resuming from system sleep,
     regardless of whether a bridge can suspend to D3cold at runtime

   - Wait for secondary bus to become ready after a bridge reset

  Virtualization:

   - Avoid FLR on some AMD FCH AHCI adapters where it doesn't work

   - Allow independent IOMMU groups for some Wangxun NICs that prevent
     peer-to-peer transactions but don't advertise an ACS Capability

  Error handling:

   - Configure End-to-End-CRC (ECRC) only if Linux owns the AER
     Capability

   - Remove redundant Device Control Error Reporting Enable in the AER
     service driver since this is already done for all devices during
     enumeration

  ASPM:

   - Add pci_enable_link_state() interface to allow drivers to enable
     ASPM link state

  Endpoint framework:

   - Move dra7xx and tegra194 linkup processing from hard IRQ to
     threaded IRQ handler

   - Add a separate lock for endpoint controller list of endpoint
     function drivers to prevent deadlock in callbacks

   - Pass events from endpoint controller to endpoint function drivers
     via callbacks instead of notifiers

  Synopsys DesignWare eDMA controller driver (acked by Vinod):

   - Fix CPU vs PCI address issues

   - Fix source vs destination address issues

   - Fix issues with interleaved transfer semantics

   - Fix channel count initialization issue (issue still exists in
     several other drivers)

   - Clean up and improve debugfs usage so it will work on platforms
     with several eDMA devices

  Baikal T-1 PCIe controller driver:

   - Set a 64-bit DMA mask

  Freescale i.MX6 PCIe controller driver:

   - Add i.MX8MM, i.MX8MQ, i.MX8MP endpoint mode DT binding and driver
     support

  Intel VMD host bridge driver:

   - Add quirk to configure PCIe ASPM and LTR. This is normally done by
     BIOS, and will be for future products

  Marvell MVEBU PCIe controller driver:

   - Mark this driver as broken in Kconfig since bugs prevent its daily
     usage

  MediaTek MT7621 PCIe controller driver:

   - Delay PHY port initialization to improve boot reliability for ZBT
     WE1326, ZBT WF3526-P, and some Netgear models

  Qualcomm PCIe controller driver:

   - Add MSM8998 DT compatible string

   - Unify MSM8996 and MSM8998 clock orderings

   - Add SM8350 DT binding and driver support

   - Add IPQ8074 Gen3 DT binding and driver support

   - Correct qcom,perst-regs in DT binding

   - Add qcom_pcie_host_deinit() so the PHY is powered off and
     regulators and clocks are disabled on late host-init errors

  Socionext UniPhier Pro5 controller driver:

   - Clean up uniphier-ep reg, clocks, resets, and their names in DT
     binding

  Synopsys DesignWare PCIe controller driver:

   - Restrict coherent DMA mask to 32 bits for MSI, but allow controller
     drivers to set 64-bit streaming DMA mask

   - Add eDMA engine support in both Root Port and Endpoint controllers

  Miscellaneous:

   - Remove MODULE_LICENSE from boolean drivers so they don't look like
     modules so modprobe can complain about them"

* tag 'pci-v6.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (86 commits)
  PCI: dwc: Add Root Port and Endpoint controller eDMA engine support
  PCI: bt1: Set 64-bit DMA mask
  PCI: dwc: Restrict only coherent DMA mask for MSI address allocation
  dmaengine: dw-edma: Prepare dw_edma_probe() for builtin callers
  dmaengine: dw-edma: Depend on DW_EDMA instead of selecting it
  dmaengine: dw-edma: Add mem-mapped LL-entries support
  PCI: Remove MODULE_LICENSE so boolean drivers don't look like modules
  PCI: hv: Drop duplicate PCI_MSI dependency
  PCI/P2PDMA: Annotate RCU dereference
  PCI/sysfs: Constify struct kobj_type pci_slot_ktype
  PCI: hotplug: Allow marking devices as disconnected during bind/unbind
  PCI: pciehp: Add Qualcomm quirk for Command Completed erratum
  PCI: qcom: Add IPQ8074 Gen3 port support
  dt-bindings: PCI: qcom: Add IPQ8074 Gen3 port
  dt-bindings: PCI: qcom: Sort compatibles alphabetically
  PCI: qcom: Fix host-init error handling
  PCI: qcom: Add SM8350 support
  dt-bindings: PCI: qcom: Add SM8350
  dt-bindings: PCI: qcom-ep: Correct qcom,perst-regs
  dt-bindings: PCI: qcom: Unify MSM8996 and MSM8998 clock order
  ...

Pull rdma updates from Jason Gunthorpe:
 "Quite a small cycle this time, even with the rc8. I suppose everyone
  went to sleep over xmas.

   - Minor driver updates for hfi1, cxgb4, erdma, hns, irdma, mlx5, siw,
     mana

   - inline CQE support for hns

   - Have mlx5 display device error codes

   - Pinned DMABUF support for irdma

   - Continued rxe cleanups, particularly converting the MRs to use
     xarray

   - Improvements to what can be cached in the mlx5 mkey cache"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (61 commits)
  IB/mlx5: Extend debug control for CC parameters
  IB/hfi1: Fix sdma.h tx->num_descs off-by-one errors
  IB/hfi1: Fix math bugs in hfi1_can_pin_pages()
  RDMA/irdma: Add support for dmabuf pin memory regions
  RDMA/mlx5: Use query_special_contexts for mkeys
  net/mlx5e: Use query_special_contexts for mkeys
  net/mlx5: Change define name for 0x100 lkey value
  net/mlx5: Expose bits for querying special mkeys
  RDMA/rxe: Fix missing memory barriers in rxe_queue.h
  RDMA/mana_ib: Fix a bug when the PF indicates more entries for registering memory on first packet
  RDMA/rxe: Remove rxe_alloc()
  RDMA/cma: Distinguish between sockaddr_in and sockaddr_in6 by size
  Subject: RDMA/rxe: Handle zero length rdma
  iw_cxgb4: Fix potential NULL dereference in c4iw_fill_res_cm_id_entry()
  RDMA/mlx5: Use rdma_umem_for_each_dma_block()
  RDMA/umem: Remove unused 'work' member from struct ib_umem
  RDMA/irdma: Cap MSIX used to online CPUs + 1
  RDMA/mlx5: Check reg_create() create for errors
  RDMA/restrack: Correct spelling
  RDMA/cxgb4: Fix potential null-ptr-deref in pass_establish()
  ...

Pull iommufd updates from Jason Gunthorpe:
 "Some polishing and small fixes for iommufd:

   - Remove IOMMU_CAP_INTR_REMAP, instead rely on the interrupt
     subsystem

   - Use GFP_KERNEL_ACCOUNT inside the iommu_domains

   - Support VFIO_NOIOMMU mode with iommufd

   - Various typos

   - A list corruption bug if HWPTs are used for attach"

* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
  iommufd: Do not add the same hwpt to the ioas->hwpt_list twice
  iommufd: Make sure to zero vfio_iommu_type1_info before copying to user
  vfio: Support VFIO_NOIOMMU with iommufd
  iommufd: Add three missing structures in ucmd_buffer
  selftests: iommu: Fix test_cmd_destroy_access() call in user_copy
  iommu: Remove IOMMU_CAP_INTR_REMAP
  irq/s390: Add arch_is_isolated_msi() for s390
  iommu/x86: Replace IOMMU_CAP_INTR_REMAP with IRQ_DOMAIN_FLAG_ISOLATED_MSI
  genirq/msi: Rename IRQ_DOMAIN_MSI_REMAP to IRQ_DOMAIN_ISOLATED_MSI
  genirq/irqdomain: Remove unused irq_domain_check_msi_remap() code
  iommufd: Convert to msi_device_has_isolated_msi()
  vfio/type1: Convert to iommu_group_has_isolated_msi()
  iommu: Add iommu_group_has_isolated_msi()
  genirq/msi: Add msi_device_has_isolated_msi()

Pull iommu updates from Joerg Roedel:

 - Consolidate iommu_map/unmap functions.

   There have been blocking and atomic variants so far, but that was
   problematic as this approach does not scale with required new
   variants which just differ in the GFP flags used. So Jason
   consolidated this back into single functions that take a GFP
   parameter.

 - Retire the detach_dev() call-back in iommu_ops

 - Arm SMMU updates from Will:
     - Device-tree binding updates:
         - Cater for three power domains on SM6375
         - Document existing compatible strings for Qualcomm SoCs
         - Tighten up clocks description for platform-specific
           compatible strings
     - Enable Qualcomm workarounds for some additional platforms that
       need them

 - Intel VT-d updates from Lu Baolu:
     - Add Intel IOMMU performance monitoring support
     - Set No Execute Enable bit in PASID table entry
     - Two performance optimizations
     - Fix PASID directory pointer coherency
     - Fix missed rollbacks in error path
     - Cleanups

 - Apple t8110 DART support

 - Exynos IOMMU:
     - Implement better fault handling
     - Error handling fixes

 - Renesas IPMMU:
     - Add device tree bindings for r8a779g0

 - AMD IOMMU:
     - Various fixes for handling on SNP-enabled systems and
       handling of faults with unknown request-ids
     - Cleanups and other small fixes

 - Various other smaller fixes and cleanups

* tag 'iommu-updates-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (71 commits)
  iommu/amd: Skip attach device domain is same as new domain
  iommu: Attach device group to old domain in error path
  iommu/vt-d: Allow to use flush-queue when first level is default
  iommu/vt-d: Fix PASID directory pointer coherency
  iommu/vt-d: Avoid superfluous IOTLB tracking in lazy mode
  iommu/vt-d: Fix error handling in sva enable/disable paths
  iommu/amd: Improve page fault error reporting
  iommu/amd: Do not identity map v2 capable device when snp is enabled
  iommu: Fix error unwind in iommu_group_alloc()
  iommu/of: mark an unused function as __maybe_unused
  iommu: dart: DART_T8110_ERROR range should be 0 to 5
  iommu/vt-d: Enable IOMMU perfmon support
  iommu/vt-d: Add IOMMU perfmon overflow handler support
  iommu/vt-d: Support cpumask for IOMMU perfmon
  iommu/vt-d: Add IOMMU perfmon support
  iommu/vt-d: Support Enhanced Command Interface
  iommu/vt-d: Retrieve IOMMU perfmon capability information
  iommu/vt-d: Support size of the register set in DRHD
  iommu/vt-d: Set No Execute Enable bit in PASID table entry
  iommu/vt-d: Remove sva from intel_svm_dev
  ...

Pull devicetree updates from Rob Herring:
 "DT core:

   - Add node lifecycle unit tests

   - Add of_property_present() helper aligned with fwnode API

   - Print more information on reserved regions on boot

   - Update dtc to upstream v1.6.1-66-gabbd523bae6e

   - Use strscpy() to instead of strncpy() in DT core

   - Add option for schema validation on %.dtb targets

  Bindings:

   - Add/fix support for listing multiple patterns in DT_SCHEMA_FILES

   - Rework external memory controller/bus bindings to properly support
     controller specific child node properties

   - Convert loongson,ls1x-intc, fcs,fusb302, sil,sii8620, Rockchip
     RK3399 PCIe, Synquacer I2C, and Synquacer EXIU bindings to DT
     schema format

   - Add RiscV SBI PMU event mapping binding

   - Add missing contraints on Arm SCMI child node allowed properties

   - Add a bunch of missing Socionext UniPhier glue block bindings and
     example fixes

   - Various fixes for duplicate or conflicting type definitions on DT
     properties"

* tag 'devicetree-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (66 commits)
  dt-bindings: regulator: Add mps,mpq7932 power-management IC
  of: dynamic: Fix spelling mistake "kojbect" -> "kobject"
  dt-bindings: drop Sagar Kadam from SiFive binding maintainership
  dt-bindings: sram: qcom,imem: document sm8450
  dt-bindings: interrupt-controller: convert loongson,ls1x-intc.txt to json-schema
  dt-bindings: arm: Add Cortex-A715 and X3
  of: dynamic: add lifecycle docbook info to node creation functions
  of: add consistency check to of_node_release()
  of: do not use "%pOF" printk format on node with refcount of zero
  of: unittest: add node lifecycle tests
  of: update kconfig unittest help
  of: add processing of EXPECT_NOT to of_unittest_expect
  of: prepare to add processing of EXPECT_NOT to of_unittest_expect
  of: Use preferred of_property_read_* functions
  of: Use of_property_present() helper
  of: Add of_property_present() helper
  of: reserved_mem: Use proper binary prefix
  dt-bindings: Fix multi pattern support in DT_SCHEMA_FILES
  of: reserved-mem: print out reserved-mem details during boot
  dt-bindings: serial: restrict possible child node names
  ...

Pull driver core updates from Greg KH:
 "Here is the large set of driver core changes for 6.3-rc1.

  There's a lot of changes this development cycle, most of the work
  falls into two different categories:

   - fw_devlink fixes and updates. This has gone through numerous review
     cycles and lots of review and testing by lots of different devices.
     Hopefully all should be good now, and Saravana will be keeping a
     watch for any potential regression on odd embedded systems.

   - driver core changes to work to make struct bus_type able to be
     moved into read-only memory (i.e. const) The recent work with Rust
     has pointed out a number of areas in the driver core where we are
     passing around and working with structures that really do not have
     to be dynamic at all, and they should be able to be read-only
     making things safer overall. This is the contuation of that work
     (started last release with kobject changes) in moving struct
     bus_type to be constant. We didn't quite make it for this release,
     but the remaining patches will be finished up for the release after
     this one, but the groundwork has been laid for this effort.

  Other than that we have in here:

   - debugfs memory leak fixes in some subsystems

   - error path cleanups and fixes for some never-able-to-be-hit
     codepaths.

   - cacheinfo rework and fixes

   - Other tiny fixes, full details are in the shortlog

  All of these have been in linux-next for a while with no reported
  problems"

[ Geert Uytterhoeven points out that that last sentence isn't true, and
  that there's a pending report that has a fix that is queued up - Linus ]

* tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits)
  debugfs: drop inline constant formatting for ERR_PTR(-ERROR)
  OPP: fix error checking in opp_migrate_dentry()
  debugfs: update comment of debugfs_rename()
  i3c: fix device.h kernel-doc warnings
  dma-mapping: no need to pass a bus_type into get_arch_dma_ops()
  driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place
  Revert "driver core: add error handling for devtmpfs_create_node()"
  Revert "devtmpfs: add debug info to handle()"
  Revert "devtmpfs: remove return value of devtmpfs_delete_node()"
  driver core: cpu: don't hand-override the uevent bus_type callback.
  devtmpfs: remove return value of devtmpfs_delete_node()
  devtmpfs: add debug info to handle()
  driver core: add error handling for devtmpfs_create_node()
  driver core: bus: update my copyright notice
  driver core: bus: add bus_get_dev_root() function
  driver core: bus: constify bus_unregister()
  driver core: bus: constify some internal functions
  driver core: bus: constify bus_get_kset()
  driver core: bus: constify bus_register/unregister_notifier()
  driver core: remove private pointer from struct bus_type
  ...

Pull char/misc and other driver subsystem updates from Greg KH:
 "Here is the large set of driver changes for char/misc drivers and
  other smaller driver subsystems that flow through this git tree.

  Included in here are:

   - New IIO drivers and features and improvments in that subsystem

   - New hwtracing drivers and additions to that subsystem

   - lots of interconnect changes and new drivers as that subsystem
     seems under very active development recently. This required also
     merging in the icc subsystem changes through this tree.

   - FPGA driver updates

   - counter subsystem and driver updates

   - MHI driver updates

   - nvmem driver updates

   - documentation updates

   - Other smaller driver updates and fixes, full details in the
     shortlog

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'char-misc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (223 commits)
  scripts/tags.sh: fix incompatibility with PCRE2
  firmware: coreboot: Remove GOOGLE_COREBOOT_TABLE_ACPI/OF Kconfig entries
  mei: lower the log level for non-fatal failed messages
  mei: bus: disallow driver match while dismantling device
  misc: vmw_balloon: fix memory leak with using debugfs_lookup()
  nvmem: stm32: fix OPTEE dependency
  dt-bindings: nvmem: qfprom: add IPQ8074 compatible
  nvmem: qcom-spmi-sdam: register at device init time
  nvmem: rave-sp-eeprm: fix kernel-doc bad line warning
  nvmem: stm32: detect bsec pta presence for STM32MP15x
  nvmem: stm32: add OP-TEE support for STM32MP13x
  nvmem: core: use nvmem_add_one_cell() in nvmem_add_cells_from_of()
  nvmem: core: add nvmem_add_one_cell()
  nvmem: core: drop the removal of the cells in nvmem_add_cells()
  nvmem: core: move struct nvmem_cell_info to nvmem-provider.h
  nvmem: core: add an index parameter to the cell
  of: property: add #nvmem-cell-cells property
  of: property: make #.*-cells optional for simple props
  of: base: add of_parse_phandle_with_optional_args()
  net: add helper eth_addr_add()
  ...

Pull staging driver updates from Greg KH:
 "Here is the "boring" staging driver update for 6.3-rc1.

  Nothing major in here at all, it's just lots of tiny code cleanups to
  bring some of the staging drivers more in line with the real portion
  of the kernel (apis and coding style.) Overall we remove more lines of
  code than we add, always a nice result.

  The big work was done by Martin Kaiser and Philipp Hortmann, both
  tackling some of the older wifi drivers, removing unused code and
  structures and a file in one case.

  Full details of the changes are in the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (219 commits)
  staging: r8188eu: Revert "staging: r8188eu: simplify rtw_get_ff_hwaddr"
  staging: r8188eu: replace hand coded loop with list_for_each_entry
  staging: r8188eu: merge _rtw_enqueue_cmd into its caller
  most: add maintainer entry
  staging: rtl8192e: Use BIT() instead of << for bit field MSR_LINK_MASK
  staging: rtl8192e: Rename DM_RxPathSelTable
  staging: rtl8192e: Rename diff_TH and disabledRF
  staging: rtl8192e: Rename Enable, cck_Rx_path and SS_TH_low
  staging: rtl8192e: Rename RateAdaptiveTH.., VeryLowRSSI and WAIotTHVal
  staging: rtl8192e: Rename RxPathSelectio.., RateAdaptive.. and RateAdap..
  staging: rtl8192e: Rename OFDM_Table.., CCK_Table_.. and RxPathSelecti..
  staging: rtl8192e: Rename MacBlkCtrl and remove double definition
  staging: rtl8192e: Remove blank lines in r8192E_hw.h, rtl_core.h and ..
  staging: rtl8192e: Rename AcmHw_ViqEn, AcmHw_VoqEn and ANAPAR_FOR_8192PciE
  staging: r8188eu: bagg_pkt parameter is not used
  staging: r8188eu: simplify rtw_get_ff_hwaddr
  staging: r8188eu: simplify xmit_buf flags
  staging: r8188eu: xmit_buf's ff_hwaddr is not used
  staging: r8188eu: remove unused frametag defines
  staging: r8188eu: simplify rtw_alloc_xmitframe
  ...

Pull tty / serial driver updates from Greg KH:
 "Here is the big set of serial and tty driver updates for 6.3-rc1.

  Once again, Jiri and Ilpo have done a number of core vt and tty/serial
  layer cleanups that were much needed and appreciated. Other than that,
  it's just a bunch of little tty/serial driver updates:

   - qcom-geni-serial driver updates

   - liteuart driver updates

   - hvcs driver cleanups

   - n_gsm updates and additions for new features

   - more 8250 device support added

   - fpga/dfl update and additions

   - imx serial driver updates

   - fsl_lpuart updates

   - other tiny fixes and updates for serial drivers

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (143 commits)
  tty: n_gsm: add keep alive support
  serial: imx: remove a redundant check
  dt-bindings: serial: snps-dw-apb-uart: add dma & dma-names properties
  soc: qcom: geni-se: Move qcom-geni-se.h to linux/soc/qcom/geni-se.h
  tty: n_gsm: add TIOCMIWAIT support
  tty: n_gsm: add RING/CD control support
  tty: n_gsm: mark unusable ioctl structure fields accordingly
  serial: imx: get rid of registers shadowing
  serial: imx: refine local variables in rxint()
  serial: imx: stop using USR2 in FIFO reading loop
  serial: imx: remove redundant USR2 read from FIFO reading loop
  serial: imx: do not break from FIFO reading loop prematurely
  serial: imx: do not sysrq broken chars
  serial: imx: work-around for hardware RX flood
  serial: imx: factor-out common code to imx_uart_soft_reset()
  serial: 8250_pci1xxxx: Add power management functions to quad-uart driver
  serial: 8250_pci1xxxx: Add RS485 support to quad-uart driver
  serial: 8250_pci1xxxx: Add driver for quad-uart support
  serial: 8250_pci: Add serial8250_pci_setup_port definition in 8250_pcilib.c
  tty: pcn_uart: fix memory leak with using debugfs_lookup()
  ...

Pull USB / Thunderbolt driver updates from Greg KH:
 "Here is the big set of USB and Thunderbolt driver changes for 6.3-rc1.

  Nothing major in here, just lots of good development, including:

   - Thunderbolt additions for new device support and features

   - xhci driver updates and cleanups

   - USB gadget media driver updates (includes media core changes that
     were acked by the v4l2 maintainers)

   - lots of other USB gadget driver updates for new features

   - dwc3 driver updates and fixes

   - minor debugfs leak fixes

   - typec driver updates and additions

   - dt-bindings conversions to yaml

   - other small bugfixes and driver updates

  All have been in linux-next for a while with no reported issues"

* tag 'usb-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (237 commits)
  usb: dwc3: xilinx: Remove unused of_gpio,h
  usb: typec: pd: Add higher capability sysfs for sink PDO
  usb: typec: pd: Remove usb_suspend_supported sysfs from sink PDO
  usb: dwc3: pci: add support for the Intel Meteor Lake-M
  usb: gadget: u_ether: Don't warn in gether_setup_name_default()
  usb: gadget: u_ether: Convert prints to device prints
  usb: gadget: u_serial: Add null pointer check in gserial_resume
  usb: gadget: uvc: fix missing mutex_unlock() if kstrtou8() fails
  xhci: host: potential NULL dereference in xhci_generic_plat_probe()
  dt-bindings: usb: amlogic,meson-g12a-usb-ctrl: make G12A usb3-phy0 optional
  usb: host: fsl-mph-dr-of: reuse device_set_of_node_from_dev
  of: device: Do not ignore error code in of_device_uevent_modalias
  of: device: Ignore modalias of reused nodes
  usb: gadget: configfs: Fix set but not used variable warning
  usb: gadget: uvc: Use custom strings if available
  usb: gadget: uvc: Allow linking function to string descs
  usb: gadget: uvc: Pick up custom string descriptor IDs
  usb: gadget: uvc: Allow linking XUs to string descriptors
  usb: gadget: configfs: Attach arbitrary strings to cdev
  usb: gadget: configfs: Support arbitrary string descriptors
  ...

Fix the cifs_writepages_region() to just jump over members of the batch
that have been cleaned up rather than counting them as skipped.

Unlike the other "skip_write" cases, this situation happens even for
WB_SYNC_ALL, simply because the page has either been cleaned by somebody
else, or was truncated.

So in this case we're not "skipping" the write, we simply no longer need
any write at all, so it's very different from the other skip_write cases.

And we definitely shouldn't stop writing the rest just because of too
many of these cases (or because we want to be rescheduled).

Fixes: 3822a7c4 ("Merge tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/lkml/2213409.1677249075@warthog.procyon.org.uk/Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'mm-nonmm-stable-2023-02-20-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull non-MM updates from Andrew Morton:
 "There is no particular theme here - mainly quick hits all over the
  tree.

  Most notable is a set of zlib changes from Mikhail Zaslonko which
  enhances and fixes zlib's use of S390 hardware support: 'lib/zlib: Set
  of s390 DFLTCC related patches for kernel zlib'"

* tag 'mm-nonmm-stable-2023-02-20-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (55 commits)
  Update CREDITS file entry for Jesper Juhl
  sparc: allow PM configs for sparc32 COMPILE_TEST
  hung_task: print message when hung_task_warnings gets down to zero.
  arch/Kconfig: fix indentation
  scripts/tags.sh: fix the Kconfig tags generation when using latest ctags
  nilfs2: prevent WARNING in nilfs_dat_commit_end()
  lib/zlib: remove redundation assignement of avail_in dfltcc_gdht()
  lib/Kconfig.debug: do not enable DEBUG_PREEMPT by default
  lib/zlib: DFLTCC always switch to software inflate for Z_PACKET_FLUSH option
  lib/zlib: DFLTCC support inflate with small window
  lib/zlib: Split deflate and inflate states for DFLTCC
  lib/zlib: DFLTCC not writing header bits when avail_out == 0
  lib/zlib: fix DFLTCC ignoring flush modes when avail_in == 0
  lib/zlib: fix DFLTCC not flushing EOBS when creating raw streams
  lib/zlib: implement switching between DFLTCC and software
  lib/zlib: adjust offset calculation for dfltcc_state
  nilfs2: replace WARN_ONs for invalid DAT metadata block requests
  scripts/spelling.txt: add "exsits" pattern and fix typo instances
  fs: gracefully handle ->get_block not mapping bh in __mpage_writepage
  cramfs: Kconfig: fix spelling & punctuation
  ...

Pull MM updates from Andrew Morton:

 - Daniel Verkamp has contributed a memfd series ("mm/memfd: add
   F_SEAL_EXEC") which permits the setting of the memfd execute bit at
   memfd creation time, with the option of sealing the state of the X
   bit.

 - Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
   thread-safe for pmd unshare") which addresses a rare race condition
   related to PMD unsharing.

 - Several folioification patch serieses from Matthew Wilcox, Vishal
   Moola, Sidhartha Kumar and Lorenzo Stoakes

 - Johannes Weiner has a series ("mm: push down lock_page_memcg()")
   which does perform some memcg maintenance and cleanup work.

 - SeongJae Park has added DAMOS filtering to DAMON, with the series
   "mm/damon/core: implement damos filter".

   These filters provide users with finer-grained control over DAMOS's
   actions. SeongJae has also done some DAMON cleanup work.

 - Kairui Song adds a series ("Clean up and fixes for swap").

 - Vernon Yang contributed the series "Clean up and refinement for maple
   tree".

 - Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
   adds to MGLRU an LRU of memcgs, to improve the scalability of global
   reclaim.

 - David Hildenbrand has added some userfaultfd cleanup work in the
   series "mm: uffd-wp + change_protection() cleanups".

 - Christoph Hellwig has removed the generic_writepages() library
   function in the series "remove generic_writepages".

 - Baolin Wang has performed some maintenance on the compaction code in
   his series "Some small improvements for compaction".

 - Sidhartha Kumar is doing some maintenance work on struct page in his
   series "Get rid of tail page fields".

 - David Hildenbrand contributed some cleanup, bugfixing and
   generalization of pte management and of pte debugging in his series
   "mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
   swap PTEs".

 - Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
   flag in the series "Discard __GFP_ATOMIC".

 - Sergey Senozhatsky has improved zsmalloc's memory utilization with
   his series "zsmalloc: make zspage chain size configurable".

 - Joey Gouly has added prctl() support for prohibiting the creation of
   writeable+executable mappings.

   The previous BPF-based approach had shortcomings. See "mm: In-kernel
   support for memory-deny-write-execute (MDWE)".

 - Waiman Long did some kmemleak cleanup and bugfixing in the series
   "mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".

 - T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
   "mm: multi-gen LRU: improve".

 - Jiaqi Yan has provided some enhancements to our memory error
   statistics reporting, mainly by presenting the statistics on a
   per-node basis. See the series "Introduce per NUMA node memory error
   statistics".

 - Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
   regression in compaction via his series "Fix excessive CPU usage
   during compaction".

 - Christoph Hellwig does some vmalloc maintenance work in the series
   "cleanup vfree and vunmap".

 - Christoph Hellwig has removed block_device_operations.rw_page() in
   ths series "remove ->rw_page".

 - We get some maple_tree improvements and cleanups in Liam Howlett's
   series "VMA tree type safety and remove __vma_adjust()".

 - Suren Baghdasaryan has done some work on the maintainability of our
   vm_flags handling in the series "introduce vm_flags modifier
   functions".

 - Some pagemap cleanup and generalization work in Mike Rapoport's
   series "mm, arch: add generic implementation of pfn_valid() for
   FLATMEM" and "fixups for generic implementation of pfn_valid()"

 - Baoquan He has done some work to make /proc/vmallocinfo and
   /proc/kcore better represent the real state of things in his series
   "mm/vmalloc.c: allow vread() to read out vm_map_ram areas".

 - Jason Gunthorpe rationalized the GUP system's interface to the rest
   of the kernel in the series "Simplify the external interface for
   GUP".

 - SeongJae Park wishes to migrate people from DAMON's debugfs interface
   over to its sysfs interface. To support this, we'll temporarily be
   printing warnings when people use the debugfs interface. See the
   series "mm/damon: deprecate DAMON debugfs interface".

 - Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
   and clean-ups" series.

 - Huang Ying has provided a dramatic reduction in migration's TLB flush
   IPI rates with the series "migrate_pages(): batch TLB flushing".

 - Arnd Bergmann has some objtool fixups in "objtool warning fixes".

* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
  include/linux/migrate.h: remove unneeded externs
  mm/memory_hotplug: cleanup return value handing in do_migrate_range()
  mm/uffd: fix comment in handling pte markers
  mm: change to return bool for isolate_movable_page()
  mm: hugetlb: change to return bool for isolate_hugetlb()
  mm: change to return bool for isolate_lru_page()
  mm: change to return bool for folio_isolate_lru()
  objtool: add UACCESS exceptions for __tsan_volatile_read/write
  kmsan: disable ftrace in kmsan core code
  kasan: mark addr_has_metadata __always_inline
  mm: memcontrol: rename memcg_kmem_enabled()
  sh: initialize max_mapnr
  m68k/nommu: add missing definition of ARCH_PFN_OFFSET
  mm: percpu: fix incorrect size in pcpu_obj_full_size()
  maple_tree: reduce stack usage with gcc-9 and earlier
  mm: page_alloc: call panic() when memoryless node allocation fails
  mm: multi-gen LRU: avoid futile retries
  migrate_pages: move THP/hugetlb migration support check to simplify code
  migrate_pages: batch flushing TLB
  migrate_pages: share more code between _unmap and _move
  ...

Pull LED updates from Lee Jones:
 "Removed Drivers:
   - HTC ASIC3 LED

  New Functionality:
   - Provide generic led_get() which can be used by both DT and !DT
     platforms

  Fix-ups:
   - Convert a bunch of I2C subsystem users to the new probing API
   - Explicitly provide missing include files
   - Make use of led_init_default_state_get() and rid the custom
     variants
   - Use simplified fwnode_device_is_compatible() API
   - Provide some Device Tree additions / adaptions
   - Fix some trivial spelling issues

  Bug Fixes:
   - Prevent device refcount leak during led_put() and of_led_get()
   - Clear previous data from temporary led_pwm structure before
     processing next child
   - Fix Clang's warning about incompatible function types when using
     devm_add_action*()"

* tag 'leds-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (41 commits)
  leds: Remove ide-disk trigger
  dt-bindings: leds: Add disk write/read and usb-host/usb-gadget
  Documentation: leds: Correct spelling
  dt-bindings: leds: Document Bluetooth and WLAN triggers
  leds: Remove asic3 driver
  leds: simatic-ipc-leds-gpio: Make sure we have the GPIO providing driver
  leds: tca6507: Convert to use fwnode_device_is_compatible()
  leds: syscon: Get rid of custom led_init_default_state_get()
  leds: pm8058: Get rid of custom led_init_default_state_get()
  leds: pca955x: Get rid of custom led_init_default_state_get()
  leds: mt6360: Get rid of custom led_init_default_state_get()
  leds: mt6323: Get rid of custom led_init_default_state_get()
  leds: bcm6358: Get rid of custom led_init_default_state_get()
  leds: bcm6328: Get rid of custom led_init_default_state_get()
  leds: an30259a: Get rid of custom led_init_default_state_get()
  leds: Move led_init_default_state_get() to the global header
  leds: Add missing includes and forward declarations in leds.h
  leds: is31fl319x: Wrap mutex_destroy() for devm_add_action_or_rest()
  leds: turris-omnia: Convert to i2c's .probe_new()
  leds: tlc591xx: Convert to i2c's .probe_new()
  ...

Pull backlight updates from Lee Jones:
 "New Drivers:
   - Add support for Kinetic KTZ8866 Backlight

  Removed Drivers:
   - Toshiba Sharp SL-6000 LCD and Backlight

  Fix-ups:
   - Provide some profiling optimisations with respect to
     pwm_get_state() and pwm_apply_state()
   - Make use of the dev_err_probe() API
   - Provide some Device Tree documentation additions / adaptions
   - Drop fall-back legacy PWM probing support
   - Convert over to new I2C probing API
   - Fix incorrect documentation
   - Make use of backlight_get_brightness() API

  Bug Fixes:
   - Fix disabling backlight on i.MX6 when inverted PWMs are used"

* tag 'backlight-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: ktz8866: Convert to i2c's .probe_new()
  backlight: ktz8866: Add support for Kinetic KTZ8866 backlight
  dt-bindings: leds: backlight: Add Kinetic KTZ8866 backlight
  backlight: pwm_bl: Don't rely on a disabled PWM emiting inactive state
  backlight: pwm_bl: Configure pwm only once per backlight toggle
  backlight: Remove pxa tosa support
  backlight: aat2870: Use backlight helper
  backlight: ipaq_micro: Use backlight helper
  backlight: arcxcnn: Use backlight helper
  backlight: sky81452: Fix sky81452_bl_platform_data kernel-doc
  backlight: pwm_bl: Drop support for legacy PWM probing
  dt-bindings: backlight: qcom-wled: Add PMI8950 compatible
  backlight: ktd253: Switch to use dev_err_probe() helper
  backlight: backlight: Fix doc for backlight_device_get_by_name

Pull MFD updates from Lee Jones:
 "Core Framework:
   - Change MFD support status from Supported to Maintained

  New Drivers:
   - Add support for the Intel Platform Management Component Interface
     (PMCI)

  Removed Drivers:
   - HTC PASIC3 LED/DS1WM
   - Toshiba T7L66XB, TC6387XB and TC6393XB TMIO

  New Device Support:
   - Add support for N6000 Flash to Intel M10 BMC PMCI
   - Add support for Lenovo Yoga Tab 3 to Intel CHTWC PMIC

  New Functionality:
   - Provide Reset support to Syscon

  Fix-ups:
   - Explicitly provide missing include files
   - Pass platform type data/info via the SPI/I2C/DT registration
     strategy
   - Lots of DT documentation / adaptions
   - Replace scnprintf() with preferred sysfs_emit()
   - Remove unused / superfluous code
   - Fix some trivial whitesspace / spelling / grammatical issues
   - Replace pm_power_off with new and improved
     register_sys_off_handler() API

  Bug Fixes:
   - Reintroduce RK808-clkout registration - fixing Wi-Fi and Bluetooth
   - Repair the order of AXPxxx IRQ PEK RISE/FALL definitions
   - Refuse to build CS5535 on unsupported UML architectures
   - Fix memory leaks in error return paths
   - Prevent refcount leaks in error return paths"

* tag 'mfd-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (40 commits)
  dt-bindings: mfd: qcom,tcsr: Add compatible for IPQ5332
  dt-bindings: mfd: Add NXP BBNSM
  mfd: ntxec: Add version number for EC in Tolino Vision
  dt-bindings: mfd: syscon: Add mt8365-syscfg
  mfd: Remove toshiba tmio drivers
  mfd: arizona: Use pm_runtime_resume_and_get() to prevent refcnt leak
  mfd: syscon: Allow reset control for syscon devices
  dt-bindings: mfd/syscon: Add resets property
  dt-bindings: mfd: syscon: Add amd,pensando-elba-syscon compatible
  dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8226
  mfd: simple-mfd-i2c: Fix incoherent comment regarding DT registration
  mfd: axp20x: Switch to the sys-off handler API
  mfd: core: Spelling s/compement/complement/
  mfd: max8925: Remove the unused function irq_to_max8925()
  mfd: qcom-pm8xxx: Remove set but unused variable 'rev'
  dt-bindings: mfd: syscon: Document GXP register compatible
  mfd: twl4030-power: Drop empty platform remove function
  mfd: twl: Fix TWL6032 phy vbus detection
  mfd: pcf50633-adc: Fix potential memleak in pcf50633_adc_async_read()
  MAINTAINERS: Move MFD from a Supported to Maintaied state
  ...

Pull EFI updates from Ard Biesheuvel:
 "A healthy mix of EFI contributions this time:

   - Performance tweaks for efifb earlycon (Andy)

   - Preparatory refactoring and cleanup work in the efivar layer, which
     is needed to accommodate the Snapdragon arm64 laptops that expose
     their EFI variable store via a TEE secure world API (Johan)

   - Enhancements to the EFI memory map handling so that Xen dom0 can
     safely access EFI configuration tables (Demi Marie)

   - Wire up the newly introduced IBT/BTI flag in the EFI memory
     attributes table, so that firmware that is generated with ENDBR/BTI
     landing pads will be mapped with enforcement enabled

   - Clean up how we check and print the EFI revision exposed by the
     firmware

   - Incorporate EFI memory attributes protocol definition and wire it
     up in the EFI zboot code (Evgeniy)

     This ensures that these images can execute under new and stricter
     rules regarding the default memory permissions for EFI page
     allocations (More work is in progress here)

   - CPER header cleanup (Dan Williams)

   - Use a raw spinlock to protect the EFI runtime services stack on
     arm64 to ensure the correct semantics under -rt (Pierre)

   - EFI framebuffer quirk for Lenovo Ideapad (Darrell)"

* tag 'efi-next-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (24 commits)
  firmware/efi sysfb_efi: Add quirk for Lenovo IdeaPad Duet 3
  arm64: efi: Make efi_rt_lock a raw_spinlock
  efi: Add mixed-mode thunk recipe for GetMemoryAttributes
  efi: x86: Wire up IBT annotation in memory attributes table
  efi: arm64: Wire up BTI annotation in memory attributes table
  efi: Discover BTI support in runtime services regions
  efi/cper, cxl: Remove cxl_err.h
  efi: Use standard format for printing the EFI revision
  efi: Drop minimum EFI version check at boot
  efi: zboot: Use EFI protocol to remap code/data with the right attributes
  efi/libstub: Add memory attribute protocol definitions
  efi: efivars: prevent double registration
  efi: verify that variable services are supported
  efivarfs: always register filesystem
  efi: efivars: add efivars printk prefix
  efi: Warn if trying to reserve memory under Xen
  efi: Actually enable the ESRT under Xen
  efi: Apply allowlist to EFI configuration tables when running under Xen
  efi: xen: Implement memory descriptor lookup based on hypercall
  efi: memmap: Disregard bogus entries instead of returning them
  ...

Pull bootconfig updates from Masami Hiramatsu:

 - Fix ftrace2bconf.sh tool for checking event enable status correctly

 - Add CONFIG_BOOT_CONFIG_FORCE to apply bootconfig without 'bootconfig'
   boot parameter

 - Enable CONFIG_BOOT_CONFIG_FORCE by default if a bootconfig is
   embedded in the kernel

 - Increase max number of nodes of bootconfig to 8192

* tag 'bootconfig-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  bootconfig: Increase max nodes of bootconfig from 1024 to 8192 for DCC support
  bootconfig: Default BOOT_CONFIG_FORCE to y if BOOT_CONFIG_EMBED
  Allow forcing unconditional bootconfig processing
  tools/bootconfig: fix single & used for logical condition

Pull sysctl update from Luis Chamberlain:
 "Just one fix which just came in.

  Sadly the eager beavers willing to help with the sysctl moves have
  slowed"

* tag 'sysctl-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  sysctl: fix proc_dobool() usability

Pull modules updates from Luis Chamberlain:
 "Nothing exciting at all for modules for v6.3.

  The biggest change is just the change of INSTALL_MOD_DIR from "extra"
  to "updates" which I found lingered for ages for no good reason while
  testing the CXL mock driver [0].

  The CXL mock driver has no kconfig integration and requires building
  an external module... and re-building the *rest* of the production
  drivers. This mock driver when loaded but not the production ones will
  crash.

  All this can obviously be fixed by integrating kconfig semantics into
  such test module, however that's not desirable by the maintainer, and
  so sensible defaults must be used to ensure a default "make
  modules_install" will suffice for most distros which do not have a
  file like /etc/depmod.d/dist.conf with something like `search updates
  extra built-in`.

  Since most distros rely on kmod and since its inception the "updates"
  directory is always in the search path it makes more sense to use that
  than the "extra" which only *some* RH based systems rely on.

  All this stuff has been on linux-next for a while"

[0] https://lkml.kernel.org/r/20221209062919.1096779-1-mcgrof@kernel.org

* tag 'modules-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  Documentation: livepatch: module-elf-format: Remove local klp_modinfo definition
  module.h: Document klp_modinfo struct using kdoc
  module: Use kstrtobool() instead of strtobool()
  kernel/params.c: Use kstrtobool() instead of strtobool()
  test_kmod: stop kernel-doc warnings
  kbuild: Modify default INSTALL_MOD_DIR from extra to updates

Merge tag 'livepatching-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching

Pull livepatching updates from Petr Mladek:

 - Allow reloading a livepatched module by clearing livepatch-specific
   relocations in the livepatch module.

   Otherwise, the repeated load would fail on consistency checks.

* tag 'livepatching-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
  livepatch,x86: Clear relocation targets on a module removal
  x86/module: remove unused code in __apply_relocate_add

Pull printk updates from Petr Mladek:

 - Refactor printk code for formatting messages that are shown on
   consoles. This is a preparatory step for introducing atomic consoles
   which could not share the global buffers

 - Prevent memory leak when removing printk index in debugfs

 - Dump also the newest printk message by the sample gdbmacro

 - Fix a compiler warning

* tag 'printk-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  printf: fix errname.c list
  kernel/printk/index.c: fix memory leak with using debugfs_lookup()
  printk: Use scnprintf() to print the message about the dropped messages on a console
  printk: adjust string limit macros
  printk: use printk_buffers for devkmsg
  printk: introduce console_prepend_dropped() for dropped messages
  printk: introduce printk_get_next_message() and printk_message
  printk: introduce struct printk_buffers
  console: Document struct console
  console: Use BIT() macros for @flags values
  printk: move size limit macros into internal.h
  docs: gdbmacros: print newest record

Pull slab updates from Vlastimil Babka:
 "This time it's just a bunch of smaller cleanups and fixes for SLAB and
  SLUB:

   - Make it possible to use kmem_cache_alloc_bulk() early in boot when
     interrupts are not yet enabled, as code doing that started to
     appear via new maple tree users (Thomas Gleixner)

   - Fix debugfs-related memory leak in SLUB (Greg Kroah-Hartman)

   - Use the standard idiom to get head page of folio (SeongJae Park)

   - Simplify and inline is_debug_pagealloc_cache() in SLAB (lvqian)

   - Remove unused variable in SLAB (Gou Hao)"

* tag 'slab-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
  mm, slab/slub: Ensure kmem_cache_alloc_bulk() is available early
  mm/slub: fix memory leak with using debugfs_lookup()
  mm/slab.c: cleanup is_debug_pagealloc_cache()
  mm/sl{a,u}b: fix wrong usages of folio_page() for getting head pages
  mm/slab: remove unused slab_early_init

Pull kprobes updates from Masami Hiramatsu:

 - Skip negative return code check for snprintf in eprobe

 - Add recursive call test cases for kprobe unit test

 - Add 'char' type to probe events to show it as the character instead
   of value

 - Update kselftest kprobe-event testcase to ignore '__pfx_' symbols

 - Fix kselftest to check filter on eprobe event correctly

 - Add filter on eprobe to the README file in tracefs

 - Fix optprobes to check whether there is 'under unoptimizing' optprobe
   when optimizing another kprobe correctly

 - Fix optprobe to check whether there is 'under unoptimizing' optprobe
   when fetching the original instruction correctly

 - Fix optprobe to free 'forcibly unoptimized' optprobe correctly

* tag 'probes-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing/eprobe: no need to check for negative ret value for snprintf
  test_kprobes: Add recursed kprobe test case
  tracing/probe: add a char type to show the character value of traced arguments
  selftests/ftrace: Fix probepoint testcase to ignore __pfx_* symbols
  selftests/ftrace: Fix eprobe syntax test case to check filter support
  tracing/eprobe: Fix to add filter on eprobe description in README file
  x86/kprobes: Fix arch_check_optimized_kprobe check within optimized_kprobe range
  x86/kprobes: Fix __recover_optprobed_insn check optimizing logic
  kprobes: Fix to handle forcibly unoptimized kprobes on freeing_list

Merge tag 'perf-tools-for-v6.3-1-2023-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools updates from Arnaldo Carvalho de Melo:
 "Miscellaneous:

   - Add Ian Rogers to MAINTAINERS as a perf tools reviewer.

   - Add support for retire latency feature (pipeline stall of a
     instruction compared to the previous one, in cycles) present on
     some Intel processors.

   - Add 'perf c2c' report option to show false sharing with adjacent
     cachelines, to be used in machines with cacheline prefetching,
     where accesses to a cacheline brings the next one too.

   - Skip 'perf test bpf' when the required kernel-debuginfo package
     isn't installed.

   - Avoid d3-flame-graph package dependency in 'perf script flamegraph',
     making this feature more generally available.

   - Add JSON metric events to present CPI stall cycles in Power10.

   - Assorted improvements/refactorings on the JSON metrics parsing
     code.

  perf lock contention:

   - Add -o/--lock-owner option:

        $ sudo ./perf lock contention -abo -- ./perf bench sched pipe
        # Running 'sched/pipe' benchmark:
        # Executed 1000000 pipe operations between two processes

             Total time: 4.766 [sec]

               4.766540 usecs/op
                 209795 ops/sec
         contended   total wait     max wait     avg wait          pid   owner

               403    565.32 us     26.81 us      1.40 us           -1   Unknown
                 4     27.99 us      8.57 us      7.00 us      1583145   sched-pipe
                 1      8.25 us      8.25 us      8.25 us      1583144   sched-pipe
                 1      2.03 us      2.03 us      2.03 us         5068   chrome

         The owner is unknown in most cases. Filtering only for the
         mutex locks, it will more likely get the owners.

   - -S/--callstack-filter is to limit display entries having the given
     string in the callstack:

        $ sudo ./perf lock contention -abv -S net sleep 1
        ...
         contended   total wait     max wait     avg wait         type   caller

                 5     70.20 us     16.13 us     14.04 us     spinlock   __dev_queue_xmit+0xb6d
                                0xffffffffa5dd1c60  _raw_spin_lock+0x30
                                0xffffffffa5b8f6ed  __dev_queue_xmit+0xb6d
                                0xffffffffa5cd8267  ip6_finish_output2+0x2c7
                                0xffffffffa5cdac14  ip6_finish_output+0x1d4
                                0xffffffffa5cdb477  ip6_xmit+0x457
                                0xffffffffa5d1fd17  inet6_csk_xmit+0xd7
                                0xffffffffa5c5f4aa  __tcp_transmit_skb+0x54a
                                0xffffffffa5c6467d  tcp_keepalive_timer+0x2fd

     Please note that to have the -b option (BPF) working above one has
     to build with BUILD_BPF_SKEL=1.

   - Add more 'perf test' entries to test these new features.

  perf script:

   - Add 'cgroup' field for 'perf script' output:

        $ perf record --all-cgroups -- true
        $ perf script -F comm,pid,cgroup
                  true 337112  /user.slice/user-657345.slice/user@657345.service/...
                  true 337112  /user.slice/user-657345.slice/user@657345.service/...
                  true 337112  /user.slice/user-657345.slice/user@657345.service/...
                  true 337112  /user.slice/user-657345.slice/user@657345.service/...

   - Add support for showing branch speculation information in 'perf
     script' and in the 'perf report' raw dump (-D).

  perf record:

   - Fix 'perf record' segfault with --overwrite and --max-size.

  perf test/bench:

   - Switch basic BPF filtering test to use syscall tracepoint to avoid
     the variable number of probes inserted when using the previous
     probe point (do_epoll_wait) that happens on different CPU
     architectures.

   - Fix DWARF unwind test by adding non-inline to expected function in
     a backtrace.

   - Use 'grep -c' where the longer form 'grep | wc -l' was being used.

   - Add getpid and execve benchmarks to 'perf bench syscall'.

  Intel PT:

   - Add support for synthesizing "cycle" events from Intel PT traces as
     we support "instruction" events when Intel PT CYC packets are
     available. This enables much more accurate profiles than when using
     the regular 'perf record -e cycles' (the default) when the workload
     lasts for very short periods (<10ms).

   - .plt symbol handling improvements, better handling IBT (in the past
     MPX) done in the context of decoding Intel PT processor traces,
     IFUNC symbols on x86_64, static executables, understanding .plt.got
     symbols on x86_64.

   - Add a 'perf test' to test symbol resolution, part of the .plt
     improvements series, this tests things like symbol size in contexts
     where only the symbol start is available (kallsyms), etc.

   - Better handle auxtrace/Intel PT data when using pipe mode (perf
     record sleep 1|perf report).

   - Fix symbol lookup with kcore with multiple segments match stext,
     getting the symbol resolution to just show DSOs as unknown.

  ARM:

   - Timestamp improvements for ARM64 systems with ETMv4 (Embedded Trace
     Macrocell v4).

   - Ensure ARM64 CoreSight timestamps don't go backwards.

   - Document that ARM64 SPE (Statistical Profiling Extension) is used
     with 'perf c2c/mem'.

   - Add raw decoding for ARM64 SPEv1.2 previous branch address.

   - Update neoverse-n2-v2 ARM vendor events (JSON tables): topdown L1,
     TLB, cache, branch, PE utilization and instruction mix metrics.

   - Update decoder code for OpenCSD version 1.4, on ARM64 systems.

   - Fix command line auto-complete of CPU events on aarch64.

  Build:

   - Fix 'perf probe' and 'perf test' when libtraceevent isn't linked,
     as several tests use tracepoints, those should be skipped.

   - More fallout fixes for the removal of tools/lib/traceevent/.

   - Fix build error when linking with libpfm"

* tag 'perf-tools-for-v6.3-1-2023-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (114 commits)
  perf tests stat_all_metrics: Change true workload to sleep workload for system wide check
  perf vendor events power10: Add JSON metric events to present CPI stall cycles in powerpc
  perf intel-pt: Synthesize cycle events
  perf c2c: Add report option to show false sharing in adjacent cachelines
  perf record: Fix segfault with --overwrite and --max-size
  perf stat: Avoid merging/aggregating metric counts twice
  perf tools: Fix perf tool build error in util/pfm.c
  perf tools: Fix auto-complete on aarch64
  perf lock contention: Support old rw_semaphore type
  perf lock contention: Add -o/--lock-owner option
  perf lock contention: Fix to save callstack for the default modified
  perf test bpf: Skip test if kernel-debuginfo is not present
  perf probe: Update the exit error codes in function try_to_find_probe_trace_event
  perf script: Fix missing Retire Latency fields option documentation
  perf event x86: Add retire_lat when synthesizing PERF_SAMPLE_WEIGHT_STRUCT
  perf test x86: Support the retire_lat (Retire Latency) sample_type check
  perf test bpf: Check for libtraceevent support
  perf script: Support Retire Latency
  perf report: Support Retire Latency
  perf lock contention: Support filters for different aggregation
  ...

Pull tracing updates from Steven Rostedt:

 - Add function names as a way to filter function addresses

 - Add sample module to test ftrace ops and dynamic trampolines

 - Allow stack traces to be passed from beginning event to end event for
   synthetic events. This will allow seeing the stack trace of when a
   task is scheduled out and recorded when it gets scheduled back in.

 - Add trace event helper __get_buf() to use as a temporary buffer when
   printing out trace event output.

 - Add kernel command line to create trace instances on boot up.

 - Add enabling of events to instances created at boot up.

 - Add trace_array_puts() to write into instances.

 - Allow boot instances to take a snapshot at the end of boot up.

 - Allow live patch modules to include trace events

 - Minor fixes and clean ups

* tag 'trace-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (31 commits)
  tracing: Remove unnecessary NULL assignment
  tracepoint: Allow livepatch module add trace event
  tracing: Always use canonical ftrace path
  tracing/histogram: Fix stacktrace histogram Documententation
  tracing/histogram: Fix stacktrace key
  tracing/histogram: Fix a few problems with stacktrace variable printing
  tracing: Add BUILD_BUG() to make sure stacktrace fits in strings
  tracing/histogram: Don't use strlen to find length of stacktrace variables
  tracing: Allow boot instances to have snapshot buffers
  tracing: Add trace_array_puts() to write into instance
  tracing: Add enabling of events to boot instances
  tracing: Add creation of instances at boot command line
  tracing: Fix trace_event_raw_event_synth() if else statement
  samples: ftrace: Make some global variables static
  ftrace: sample: avoid open-coded 64-bit division
  samples: ftrace: Include the nospec-branch.h only for x86
  tracing: Acquire buffer from temparary trace sequence
  tracing/histogram: Wrap remaining shell snippets in code blocks
  tracing/osnoise: No need for schedule_hrtimeout range
  bpf/tracing: Use stage6 of tracing to not duplicate macros
  ...

Pull tracing fix from Steven Rostedt:
 "Fix race that causes a warning of corrupt ring buffer

  With the change that allows to read the "trace" file without disabling
  writing to the ring buffer, there was an integrity check of the ring
  buffer in the iterator read code, that expected the ring buffer to be
  write disabled. This caused the integrity check to trigger when stress
  reading the "trace" file while writing was happening.

  The integrity check is a bit aggressive (and has never triggered in
  practice). Change it so that it checks just the integrity of the
  linked pages without clearing the flags inside the pointers. This
  removes the warning that was being triggered"

[ Heh. This was supposed to have gone in last week before the 6.2
  release, but Steven forgot to actually add me to the participants of
  the pull request, so here it is, a week later   - Linus ]

* tag 'trace-v6.2-rc7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  ring-buffer: Handle race between rb_move_tail and rb_check_pages

Pull tracing tools updates from Steven Rostedt:

 - Use total duration to calculate average in rtla osnoise_hist

 - Use 2 digit precision for displaying average

 - Print an intuitive auto analysis of timerlat results

 - Add auto analysis to timerlat top

 - Add hwnoise, which is the same as osnoise but focuses on hardware

 - Small clean ups

* tag 'trace-tools-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  Documentation/rtla: Add hwnoise man page
  rtla: Add hwnoise tool
  Documentation/rtla: Add timerlat-top auto-analysis options
  rtla/timerlat: Add auto-analysis support to timerlat top
  rtla/timerlat: Add auto-analysis core
  tools/tracing/rtla: osnoise_hist: display average with two-digit precision
  tools/tracing/rtla: osnoise_hist: use total duration for average calculation
  tools/rv: Remove unneeded semicolon

Pull ktest updates from Steven Rostedt:

 - Fix three instances that the tty is not given back to the console on
   exit. Forcing the user to do a "reset" to get the console back.

 - Fix the console monitor to not hang when too much data is given by
   the ssh output.

* tag 'ktest-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Restore stty setting at first in dodie
  ktest.pl: Add RUN_TIMEOUT option with default unlimited
  ktest.pl: Give back console on Ctrt^C on monitor
  ktest.pl: Fix missing "end_monitor" when machine check fails

Merge tag 'linux-kselftest-kunit-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull KUnit update from Shuah Khan:

 - add Function Redirection API to isolate the code being tested from
   other parts of the kernel.

   Documentation/dev-tools/kunit/api/functionredirection.rst has the
   details.

* tag 'linux-kselftest-kunit-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: Add printf attribute to fail_current_test_impl
  lib/hashtable_test.c: add test for the hashtable structure
  Documentation: Add Function Redirection API docs
  kunit: Expose 'static stub' API to redirect functions
  kunit: Add "hooks" to call into KUnit when it's built as a module
  kunit: kunit.py extract handlers
  tools/testing/kunit/kunit.py: remove redundant double check

Merge tag 'linux-kselftest-next-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest update from Shuah Khan:

 - several patches to fix incorrect kernel headers search path from
   Mathieu Desnoyers

 - a few follow-on fixes found during testing the above change

 - miscellaneous fixes

 - support for filtering and enumerating tests

* tag 'linux-kselftest-next-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (40 commits)
  selftests/user_events: add a note about user_events.h dependency
  selftests/mount_setattr: fix to make run_tests failure
  selftests/mount_setattr: fix redefine struct mount_attr build error
  selftests/sched: fix warn_unused_result build warns
  selftests/ptp: Remove clean target from Makefile
  selftests: use printf instead of echo -ne
  selftests/ftrace: Fix bash specific "==" operator
  selftests: tpm2: remove redundant ord()
  selftests: find echo binary to use -ne options
  selftests: Fix spelling mistake "allright" -> "all right"
  selftests: tdx: Use installed kernel headers search path
  selftests: ptrace: Use installed kernel headers search path
  selftests: memfd: Use installed kernel headers search path
  selftests: iommu: Use installed kernel headers search path
  selftests: x86: Fix incorrect kernel headers search path
  selftests: vm: Fix incorrect kernel headers search path
  selftests: user_events: Fix incorrect kernel headers search path
  selftests: sync: Fix incorrect kernel headers search path
  selftests: seccomp: Fix incorrect kernel headers search path
  selftests: sched: Fix incorrect kernel headers search path
  ...

Pull nolibc updates from Paul McKenney:

 - Add s390 support

 - Add support for the ARM Thumb1 instruction set

 - Fix O_* flags definitions for open() and fcntl()

 - Make errno a weak symbol instead of a static variable

 - Export environ as a weak symbol

 - Export _auxv as a weak symbol for auxilliary vector retrieval

 - Implement getauxval() and getpagesize()

 - Further improve self tests, including permitting userland testing of
   the nolibc library

* tag 'nolibc.2023.02.06a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (28 commits)
  selftests/nolibc: Add a "run-user" target to test the program in user land
  selftests/nolibc: Support "x86_64" for arch name
  selftests/nolibc: Add `getpagesize(2)` selftest
  nolibc/sys: Implement `getpagesize(2)` function
  nolibc/stdlib: Implement `getauxval(3)` function
  tools/nolibc: add auxiliary vector retrieval for s390
  tools/nolibc: add auxiliary vector retrieval for mips
  tools/nolibc: add auxiliary vector retrieval for riscv
  tools/nolibc: add auxiliary vector retrieval for arm
  tools/nolibc: add auxiliary vector retrieval for arm64
  tools/nolibc: add auxiliary vector retrieval for x86_64
  tools/nolibc: add auxiliary vector retrieval for i386
  tools/nolibc: export environ as a weak symbol on s390
  tools/nolibc: export environ as a weak symbol on riscv
  tools/nolibc: export environ as a weak symbol on mips
  tools/nolibc: export environ as a weak symbol on arm
  tools/nolibc: export environ as a weak symbol on arm64
  tools/nolibc: export environ as a weak symbol on i386
  tools/nolibc: export environ as a weak symbol on x86_64
  tools/nolibc: make errno a weak symbol instead of a static one
  ...

Pull x86 NMI diagnostics from Paul McKenney:
 "Add diagnostics to the x86 NMI handler to help detect NMI-handler bugs
  on the one hand and failing hardware on the other"

* tag 'nmi.2023.02.14a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  x86/nmi: Print reasons why backtrace NMIs are ignored
  x86/nmi: Accumulate NMI-progress evidence in exc_nmi()

Pull LKMM (Linux Kernel Memory Model) updates from Paul McKenney:
 "Documentation updates.

  Add read-modify-write sequences, which means that stronger primitives
  more consistently result in stronger ordering, while still remaining
  in the envelope of the hardware that supports Linux.

  Address, data, and control dependencies used to ignore data that was
  stored in temporaries. This update extends these dependency chains to
  include unmarked intra-thread stores and loads. Note that these
  unmarked stores and loads should not be concurrently accessed from
  multiple threads, and doing so will cause LKMM to flag such accesses
  as data races"

* tag 'lkmm.2023.02.15a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  tools: memory-model: Make plain accesses carry dependencies
  Documentation: Fixed a typo in atomic_t.txt
  tools: memory-model: Add rmw-sequences to the LKMM
  locking/memory-barriers.txt: Improve documentation for writel() example

Pull drm updates from Dave Airlie:
 "There are a bunch of changes all over in the usual places.

  Highlights:

   - habanalabs moves from misc to accel

   - first accel driver for Intel VPU (Versatile Processing Unit)
     inference engine

   - dropped all the ancient legacy DRI1 drivers. I think it's been at
     least 10 years since anyone has heard about these.

   - Intel DG2 updates and prelim Meteorlake enablement

   - etnaviv adds support for Versilicon NPU device (a GPU like engine
     with inference accelerators)

  Detailed summary:

  Removals:
   - remove legacy dri1 drivers: i810, mga, r128, savage, sis, tdfx, via

  New driver:
   - intel VPU accelerator driver
   - habanalabs comes via drm tree now

  drm/core:
   - use drm_dbg_ helpers in several places
   - Document defaults for CRTC backgrounds
   - Document use of drm_minor

  edid:
   - improve mode parsing and refactoring

  connector:
   - support analog TV mode property

  media:
   - add some common formats

  udmabuf:
   - add vmap/vunmap methods

  fourcc:
   - add XRGB1555 and RGB565 formats
   - document open source user waiver

  firmware:
   - fix color-format selection for system framebuffer

  format-helper:
   - Add conversion from XRGB8888 to various sysfb formats
   - Make XRGB8888 the only driver-emulated legacy format
   - Add conversion from XRGB8888 to XBGR8888 and ABGR8888

  fb-helper:
   - fix preferred depth and bpp values across drivers
   - Avoid blank consoles from selecting an incorrect color format

  probe-helper:
   - Enable/disable HPD on connectors

  scheduler:
   - Fix lockup in drm_sched_entity_kill()
   - Deprecate drm_sched_resubmit_jobs()

  bridge:
   - remove unused functions
   - implement i2c probe_new in various drivers
   - ite-it6505: Locking fixes, Cache EDID data
   - ite-it66121: Support IT6610 chip
   - lontium-tl9611: Fix HDMI on DragonBoard 845c
   - parade-ps8640: Use atomic bridge functions
   - Support i.MX93 LDB plus DT bindings

  debugfs:
   - add per device helpers and convert drivers

  displayport:
   - mst fixes
   - add DP adaptive sync DPCD definitions

  fbdev:
   - always pick 32bpp as default
   - remove some unused code

  simpledrm:
   - support system memory framebuffers

  panel:
   - add orientation quirks for Lenovo Yoga Tab 3 X90F and DynaBook K50
   - Use ktime_get_boottime() to measure power-down delay
   - Fix auto-suspend delay
   - Visionox VTDR6130 AMOLED DSI
   - Support Himax HX8394
   - Convert many drivers to common generic DSI write-sequence helper
   - AUO A030JTN01

  ttm:
   - drop bo wait wrapper
   - fix MIPS build

  habanalabs:
   - moved driver to accel subsystem
   - gaudi2 decoder error improvement
   - more trace events
   - Gaudi2 abrupt reset by firmware support
   - add uAPI to flush memory transactions
   - add uAPI to pass through userspace reqs to fw
   - remove dma-buf export by handle

  amdgpu:
   - add new INFO queries for peak and min sclk/mclk for profile modes
   - Add PCIe info to the INFO IOCTL
   - secure display support for multiple displays
   - DML optimizations
   - DCN 3.2 updates
   - PSR updates
   - DP 2.1 updates
   - SR-IOV RAS updates
   - VCN RAS support
   - SMU 13.x updates
   - Switch 1 element arrays to flexible arrays
   - Add RAS support for DF 4.3
   - Stack size improvements
   - S0ix rework
   - Allow 0 as a vram limit on APUs
   - Handle profiling modes for SMU13.x
   - Fix possible segfault in failure case
   - Rework FW requests to happen in early_init for all IPs so that we
     don't lose the sbios console if FW is missing
   - Fix power reporting on certain firmwares for CZN/RN
   - Allow S0ix without BIOS support
   - Enable freesync over PCon
   - Re-enable the AGP aperture on GMC 11.x

  amdkfd:
   - Error handling fixes
   - PASID fixes
   - Fix for cleared VRAM BOs
   - Fix cleanup if GPUVM creation fails
   - Memory accounting fix
   - Use resource_size rather than open codeing it
   - GC11 mGPU fix

  radeon:
   - Switch 1 element arrays to flexible arrays
   - Fix memory leak on shutdown
   - move to new logging

  i915:
   - Meteorlake display/OA/GSC fw/workarounds enabling
   - DP MST DSC support
   - Gamma/degamma readout support for the state checker
   - Enable SDP split support for DP 2.0
   - Add probe blocking support to i915.force_probe parameter
   - Enable Xe HP 4tile support
   - Avoid display direct calls to uncore
   - Fix HuC delayed load memory leaks
   - Add DG2 workarounds Wa_18018764978 and Wa_18019271663
   - Improve suspend / resume times with VT-d scanout workaround active
   - Fix DG2 visual corruption on small BAR systems by not forgetting to
     copy CCS aux state
   - Fix TLB invalidation for Gen12.50 video and compute engines
   - Enable HF-EEODB by switching HDMI, DP and LVDS to use struct
     drm_edid
   - Start using unversioned DMC firmware paths for new platforms
   - ELD refactor: Stop using hardware buffer, precompute ELD
   - lots of display code refactoring

  nouveau:
   - drop legacy ioctl support
   - replace 0-sized array

  msm:
   - dpu/dsi/mdss: Support for SM8350, SM8450 SM8550 and SC8280XP platform
   - Added bindings for SM8150
   - dpu: Partial support for DSC on SM8150 and SM8250
   - dpu: Fixed color transformation matrix being lost on suspend/resume
   - dp: Support SDM845 and SC8280XP platforms
   - dp: Support for limiting DP link rate via DT property
   - dsi: Validate display modes according to the DSI OPP table
   - dsi: DSI PHY support for the SM6375 platform
   - Add MSM_SUBMIT_BO_NO_IMPLICI
   - a2xx: Support to load legacy firmware
   - a6xx: GPU devcore dump updates for a650/a660
   - GPU devfreq tuning and fixes
   - Turn 8960 HDMI PHY into clock provider,
   - Make 8960 HDMI PHY use PXO clock from DT

  etnaviv:
   - experimental versilicon NPU support
   - report GPU load via fdinfo format
   - MMU fault message improvements

  tegra:
   - rework syncpoint interrupt

  mediatek:
   - DSI timing fix
   - fix config deps

  ast:
   - various fixes

  exynos:
   - restore bridge chain order fixes

  gud:
   - convert to shadow plane buffers
   - perform flushing synchronously during atomic update
   - Use new debugfs helpers

  arm/hdlcd:
   - Use new debugfs helper

  ili9486:
   - Support 16-bit pixel data

  imx:
   - Split off IPUv3 driver

  mipi-dbi:
   - convert to DRM shadow-plane helpers
   - rsp driver changes
   - Support separate I/O-voltage supply

  mxsfb:
   - Depend on ARCH_MXS or ARCH_MXC

  sun4i:
   - convert to new TV mode property

  vc4:
   - convert to new TV mode property
   - kunit tests
   - Support RGB565 and RGB666 formats
   - convert dsi driver to bridge
   - Various HVS an CRTC fixes

  v3d:
   - Do not opencode drm_gem_object_lookup()

  virtio:
   - improve tracing

  vkms:
   - support small cursors in IGT tests
   - Fix SEGFAULT from incorrect GEM-buffer mapping

  rcar-du:
   - fixes and improvements"

* tag 'drm-next-2023-02-23' of git://anongit.freedesktop.org/drm/drm: (1455 commits)
  msm/fbdev: fix unused variable warning with clang.
  drm/fb-helper: Remove drm_fb_helper_unprepare() from drm_fb_helper_fini()
  dma-buf: make kobj_type structure constant
  drm/shmem-helper: Fix locking for drm_gem_shmem_get_pages_sgt()
  drm/amd/display: disable SubVP + DRR to prevent underflow
  drm/amd/display: Fail atomic_check early on normalize_zpos error
  drm/amd/pm: avoid unaligned access warnings
  drm/amd/display: avoid unaligned access warnings
  drm/amd/display: Remove duplicate/repeating expressions
  drm/amd/display: Remove duplicate/repeating expression
  drm/amd/display: Make variables declaration inside ifdef guard
  drm/amd/display: Fix excess arguments on kernel-doc
  drm/amd/display: Add previously missing includes
  drm/amd/amdgpu: Add function prototypes to headers
  drm/amd/display: Add function prototypes to headers
  drm/amd/display: Turn global functions into static
  drm/amd/display: remove unused _calculate_degamma_curve function
  drm/amd/display: remove unused func declaration from resource headers
  drm/amd/display: unset initial value for tf since it's never used
  drm/amd/display: camel case cleanup in color_gamma file
  ...

Pull cifs client updates from Steve French:
 "The largest subset of this is from David Howells et al: making the
  cifs/smb3 driver pass iov_iters down to the lowest layers, directly to
  the network transport rather than passing lists of pages around,
  helping multiple areas:

   - Pin user pages, thereby fixing the race between concurrent DIO read
     and fork, where the pages containing the DIO read buffer may end up
     belonging to the child process and not the parent - with the result
     that the parent might not see the retrieved data.

   - cifs shouldn't take refs on pages extracted from non-user-backed
     iterators (eg. KVEC). With these changes, cifs will apply the
     appropriate cleanup.

   - Making it easier to transition to using folios in cifs rather than
     pages by dealing with them through BVEC and XARRAY iterators.

   - Allowing cifs to use the new splice function

  The remainder are:

   - fixes for stable, including various fixes for uninitialized memory,
     wrong length field causing mount issue to very old servers,
     important directory lease fixes and reconnect fixes

   - cleanups (unused code removal, change one element array usage, and
     a change form strtobool to kstrtobool, and Kconfig cleanups)

   - SMBDIRECT (RDMA) fixes including iov_iter integration and UAF fixes

   - reconnect fixes

   - multichannel fixes, including improving channel allocation (to
     least used channel)

   - remove the last use of lock_page_killable by moving to
     folio_lock_killable"

* tag '6.3-rc-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: (46 commits)
  update internal module version number for cifs.ko
  cifs: update ip_addr for ses only for primary chan setup
  cifs: use tcon allocation functions even for dummy tcon
  cifs: use the least loaded channel for sending requests
  cifs: DIO to/from KVEC-type iterators should now work
  cifs: Remove unused code
  cifs: Build the RDMA SGE list directly from an iterator
  cifs: Change the I/O paths to use an iterator rather than a page list
  cifs: Add a function to read into an iter from a socket
  cifs: Add some helper functions
  cifs: Add a function to Hash the contents of an iterator
  cifs: Add a function to build an RDMA SGE list from an iterator
  netfs: Add a function to extract an iterator into a scatterlist
  netfs: Add a function to extract a UBUF or IOVEC into a BVEC iterator
  cifs: Implement splice_read to pass down ITER_BVEC not ITER_PIPE
  splice: Export filemap/direct_splice_read()
  iov_iter: Add a function to extract a page list from an iterator
  iov_iter: Define flags to qualify page extraction.
  splice: Add a func to do a splice from an O_DIRECT file without ITER_PIPE
  splice: Add a func to do a splice from a buffered file without ITER_PIPE
  ...

clang builds showed this:
drivers/gpu/drm/msm/msm_fbdev.c:144:6: error: variable 'helper' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
        if (!fbdev)
            ^~~~~~

Fixes: 3fb1f62f ("drm/fb-helper: Remove drm_fb_helper_unprepare() from drm_fb_helper_fini()")
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge tag 'drm-misc-next-fixes-2023-02-21' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

Short summary of fixes pull:

Fixes GEM SHMEM locking and generic fbdev hotplugging. Constifies
dma_buf kobj type.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y/S6tu3gdQ0VizR+@linux-uq9g

Pull NFS client updates from Anna Schumaker:
 "New Features:

   - Convert the read and write paths to use folios

  Bugfixes and Cleanups:

   - Fix tracepoint state manager flag printing

   - Fix disabling swap files

   - Fix NFSv4 client identifier sysfs path in the documentation

   - Don't clear NFS_CAP_COPY if server returns NFS4ERR_OFFLOAD_DENIED

   - Treat GETDEVICEINFO errors as a layout failure

   - Replace kmap_atomic() calls with kmap_local_page()

   - Constify sunrpc sysfs kobj_type structures"

* tag 'nfs-for-6.3-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (25 commits)
  fs/nfs: Replace kmap_atomic() with kmap_local_page() in dir.c
  pNFS/filelayout: treat GETDEVICEINFO errors as layout failure
  Documentation: Fix sysfs path for the NFSv4 client identifier
  nfs42: do not fail with EIO if ssc returns NFS4ERR_OFFLOAD_DENIED
  NFS: fix disabling of swap
  SUNRPC: make kobj_type structures constant
  nfs4trace: fix state manager flag printing
  NFS: Remove unnecessary check in nfs_read_folio()
  NFS: Improve tracing of nfs_wb_folio()
  NFS: Enable tracing of nfs_invalidate_folio() and nfs_launder_folio()
  NFS: fix up nfs_release_folio() to try to release the page
  NFS: Clean up O_DIRECT request allocation
  NFS: Fix up nfs_vm_page_mkwrite() for folios
  NFS: Convert nfs_write_begin/end to use folios
  NFS: Remove unused function nfs_wb_page()
  NFS: Convert buffered writes to use folios
  NFS: Convert the function nfs_wb_page() to use folios
  NFS: Convert buffered reads to use folios
  NFS: Add a helper nfs_wb_folio()
  NFS: Convert the remaining pagelist helper functions to support folios
  ...