- 18 Dec, 2019 7 commits
-
-
John Hurley authored
As flower rules are added, they are given a stats ID based on the number of rules that can be supported in firmware. Only after the initial allocation of all available IDs does the driver begin to reuse those that have been released. The initial allocation of IDs was modified to account for multiple memory units on the offloaded device. However, this introduced a bug whereby the counter that controls the IDs could be decremented before the ID was assigned (where it is further decremented). This means that the stats ID could be assigned as -1/0xfffffff which is out of range. Fix this by only decrementing the main counter after the current ID has been assigned. Fixes: 467322e2 ("nfp: flower: support multiple memory units for filter offloads") Signed-off-by:
John Hurley <john.hurley@netronome.com> Reviewed-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ben Dooks (Codethink) authored
dsa_link_touch() is not exported, or defined outside of the file it is in so make it static to avoid the following warning: net/dsa/dsa2.c:127:17: warning: symbol 'dsa_link_touch' was not declared. Should it be static? Signed-off-by:
Ben Dooks (Codethink) <ben.dooks@codethink.co.uk> Signed-off-by:
-
Oleksij Rempel authored
drivers/net/ethernet/atheros/ag71xx.c: In function 'ag71xx_probe': drivers/net/ethernet/atheros/ag71xx.c:1776:30: warning: passing argument 2 of 'of_get_phy_mode' makes pointer from integer without a cast [-Wint-conversion] In file included from drivers/net/ethernet/atheros/ag71xx.c:33: ./include/linux/of_net.h:15:69: note: expected 'phy_interface_t *' {aka 'enum <anonymous> *'} but argument is of type 'int' Fixes: 0c65b2b9 ("net: of_get_phy_mode: Change API to solve int/unit warnings") Signed-off-by:Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Randy Dunlap authored
Fix missing '*' kernel-doc notation that causes this warning: ../include/linux/netdevice.h:1779: warning: bad line: spinlock Fixes: ab92d68f ("net: core: add generic lockdep keys") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
Eric Dumazet authored
sk->sk_pacing_shift can be read and written without lock synchronization. This patch adds annotations to document this fact and avoid future syzbot complains. This might also avoid unexpected false sharing in sk_pacing_shift_update(), as the compiler could remove the conditional check and always write over sk->sk_pacing_shift : if (sk->sk_pacing_shift != val) sk->sk_pacing_shift = val; Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Ben Hutchings authored
ql_alloc_large_buffers() has the usual RX buffer allocation loop where it allocates skbs and maps them for DMA. It also treats failure as a fatal error. There are (at least) three bugs in the error paths: 1. ql_free_large_buffers() assumes that the lrg_buf[] entry for the first buffer that couldn't be allocated will have .skb == NULL. But the qla_buf[] array is not zero-initialised. 2. ql_free_large_buffers() DMA-unmaps all skbs in lrg_buf[]. This is incorrect for the last allocated skb, if DMA mapping failed. 3. Commit 1acb8f2a ("net: qlogic: Fix memory leak in ql_alloc_large_buffers") added a direct call to dev_kfree_skb_any() after the skb is recorded in lrg_buf[], so ql_free_large_buffers() will double-free it. The bugs are somewhat inter-twined, so fix them all at once: * Clear each entry in qla_buf[] before attempting to allocate an skb for it. This goes half-way to fixing bug 1. * Set the .skb field only after the skb is DMA-mapped. This fixes the rest. Fixes: 1357bfcf ("qla3xxx: Dynamically size the rx buffer queue ...") Fixes: 0f8ab89e ("qla3xxx: Check return code from pci_map_single() ...") Fixes: 1acb8f2a ("net: qlogic: Fix memory leak in ql_alloc_large_buffers") Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Marcelo Ricardo Leitner authored
syzbot reported a memory leak when an allocation fails within genradix_prealloc() for output streams. That's because genradix_prealloc() leaves initialized members initialized when the issue happens and SCTP stack will abort the current initialization but without cleaning up such members. The fix here is to always call genradix_free() when genradix_prealloc() fails, for output and also input streams, as it suffers from the same issue. Reported-by: syzbot+772d9e36c490b18d51d1@syzkaller.appspotmail.com Fixes: 2075e50c ("sctp: convert to genradix") Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Tested-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
- 17 Dec, 2019 9 commits
-
-
David S. Miller authored
Merge tag 'wireless-drivers-2019-12-17' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.5 First set of fixes for v5.5. Fixing security issues, some regressions and few major bugs. mwifiex * security fix for handling country Information Elements (CVE-2019-14895) * security fix for handling TDLS Information Elements ath9k * fix endian issue with ath9k_pci_owl_loader mt76 * fix default mac address handling iwlwifi * fix merge damage which lead to firmware crashing during boot on some devices * fix device initialisation regression on some devices ==================== Signed-off-by:
-
Ioana Ciornei authored
Upon reusing the ptp_qoriq driver, the ptp_qoriq_free() function was used on the remove path to free any allocated resources. The ptp_qoriq IRQ is among these resources that are freed in ptp_qoriq_free() even though it is also a managed one (allocated using devm_request_threaded_irq). Drop the resource managed version of requesting the IRQ in order to not trigger a double free of the interrupt as below: [ 226.731005] Trying to free already-free IRQ 126 [ 226.735533] WARNING: CPU: 6 PID: 749 at kernel/irq/manage.c:1707 __free_irq+0x9c/0x2b8 [ 226.743435] Modules linked in: [ 226.746480] CPU: 6 PID: 749 Comm: bash Tainted: G W 5.4.0-03629-gfd7102c32b2c-dirty #912 [ 226.755857] Hardware name: NXP Layerscape LX2160ARDB (DT) [ 226.761244] pstate: 40000085 (nZcv daIf -PAN -UAO) [ 226.766022] pc : __free_irq+0x9c/0x2b8 [ 226.769758] lr : __free_irq+0x9c/0x2b8 [ 226.773493] sp : ffff8000125039f0 (...) [ 226.856275] Call trace: [ 226.858710] __free_irq+0x9c/0x2b8 [ 226.862098] free_irq+0x30/0x70 [ 226.865229] devm_irq_release+0x14/0x20 [ 226.869054] release_nodes+0x1b0/0x220 [ 226.872790] devres_release_all+0x34/0x50 [ 226.876790] device_release_driver_internal+0x100/0x1c0 Fixes: d346c9e8 ("dpaa2-ptp: reuse ptp_qoriq driver") Cc: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by:
Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'mac80211-for-net-2019-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== A handful of fixes: * disable AQL on most drivers, addressing the iwlwifi issues * fix double-free on network namespace changes * fix TID field in frames injected through monitor interfaces * fix ieee80211_calc_rx_airtime() * fix NULL pointer dereference in rfkill (and remove BUG_ON) ==================== Signed-off-by:
-
Arnd Bergmann authored
Selecting MSCC_OCELOT_SWITCH is not possible when NET_VENDOR_MICROSEMI is disabled: WARNING: unmet direct dependencies detected for MSCC_OCELOT_SWITCH Depends on [n]: NETDEVICES [=y] && ETHERNET [=n] && NET_VENDOR_MICROSEMI [=n] && NET_SWITCHDEV [=y] && HAS_IOMEM [=y] Selected by [m]: - NET_DSA_MSCC_FELIX [=m] && NETDEVICES [=y] && HAVE_NET_DSA [=y] && NET_DSA [=y] && PCI [=y] Add a Kconfig dependency on NET_VENDOR_MICROSEMI, which also implies CONFIG_NETDEVICES. Depending on a vendor config violates menuconfig locality for the DSA driver, but is the smallest compromise since all other solutions are much more complicated (see [0]). https://www.spinics.net/lists/netdev/msg618808.html Fixes: 56051948 ("net: dsa: ocelot: add driver for Felix switch family") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Mao Wenan <maowenan@huawei.com> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Navid Emamdoost authored
In the implementation of gmac_setup_txqs() the allocated desc_ring is leaked if TX queue base is not aligned. Release it via dma_free_coherent. Fixes: 4d5ae32f ("net: ethernet: Add a driver for Gemini gigabit ethernet") Signed-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Florian Fainelli authored
There were several issues with 53568438 ("net: dsa: b53: Add support for port_egress_floods callback") that resulted in breaking connectivity for standalone ports: - both user and CPU ports must allow unicast and multicast forwarding by default otherwise this just flat out breaks connectivity for standalone DSA ports - IP multicast is treated similarly as multicast, but has separate control registers - the UC, MC and IPMC lookup failure register offsets were wrong, and instead used bit values that are meaningful for the B53_IP_MULTICAST_CTRL register Fixes: 53568438 ("net: dsa: b53: Add support for port_egress_floods callback") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by:
-
David S. Miller authored
Stefano Garzarella says: ==================== vsock/virtio: fix null-pointer dereference and related precautions This series mainly solves a possible null-pointer dereference in virtio_transport_recv_listen() introduced with the multi-transport support [PATCH 1]. PATCH 2 adds a WARN_ON check for the same potential issue and a returned error in the virtio_transport_send_pkt_info() function to avoid crashing the kernel. ==================== Signed-off-by: -
Stefano Garzarella authored
virtio_transport_get_ops() and virtio_transport_send_pkt_info() can only be used on connecting/connected sockets, since a socket assigned to a transport is required. This patch adds a WARN_ON() on virtio_transport_get_ops() to check this requirement, a comment and a returned error on virtio_transport_send_pkt_info(), Signed-off-by:
Stefano Garzarella <sgarzare@redhat.com> Signed-off-by:
-
Stefano Garzarella authored
With multi-transport support, listener sockets are not bound to any transport. So, calling virtio_transport_reset(), when an error occurs, on a listener socket produces the following null-pointer dereference: BUG: kernel NULL pointer dereference, address: 00000000000000e8 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 20 Comm: kworker/0:1 Not tainted 5.5.0-rc1-ste-00003-gb4be21f316ac-dirty #56 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014 Workqueue: virtio_vsock virtio_transport_rx_work [vmw_vsock_virtio_transport] RIP: 0010:virtio_transport_send_pkt_info+0x20/0x130 [vmw_vsock_virtio_transport_common] Code: 1f 84 00 00 00 00 00 0f 1f 00 55 48 89 e5 41 57 41 56 41 55 49 89 f5 41 54 49 89 fc 53 48 83 ec 10 44 8b 76 20 e8 c0 ba fe ff <48> 8b 80 e8 00 00 00 e8 64 e3 7d c1 45 8b 45 00 41 8b 8c 24 d4 02 RSP: 0018:ffffc900000b7d08 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff88807bf12728 RCX: 0000000000000000 RDX: ffff88807bf12700 RSI: ffffc900000b7d50 RDI: ffff888035c84000 RBP: ffffc900000b7d40 R08: ffff888035c84000 R09: ffffc900000b7d08 R10: ffff8880781de800 R11: 0000000000000018 R12: ffff888035c84000 R13: ffffc900000b7d50 R14: 0000000000000000 R15: ffff88807bf12724 FS: 0000000000000000(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000e8 CR3: 00000000790f4004 CR4: 0000000000160ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: virtio_transport_reset+0x59/0x70 [vmw_vsock_virtio_transport_common] virtio_transport_recv_pkt+0x5bb/0xe50 [vmw_vsock_virtio_transport_common] ? detach_buf_split+0xf1/0x130 virtio_transport_rx_work+0xba/0x130 [vmw_vsock_virtio_transport] process_one_work+0x1c0/0x300 worker_thread+0x45/0x3c0 kthread+0xfc/0x130 ? current_work+0x40/0x40 ? kthread_park+0x90/0x90 ret_from_fork+0x35/0x40 Modules linked in: sunrpc kvm_intel kvm vmw_vsock_virtio_transport vmw_vsock_virtio_transport_common irqbypass vsock virtio_rng rng_core CR2: 00000000000000e8 ---[ end trace e75400e2ea2fa824 ]--- This happens because virtio_transport_reset() calls virtio_transport_send_pkt_info() that can be used only on connecting/connected sockets. This patch fixes the issue, using virtio_transport_reset_no_sock() instead of virtio_transport_reset() when we are handling a listener socket. Fixes: c0cfa2d8 ("vsock: add multi-transports support") Signed-off-by:
-
- 16 Dec, 2019 1 commit
-
-
Aditya Pakki authored
In rfkill_register, the struct rfkill pointer is first derefernced and then checked for NULL. This patch removes the BUG_ON and returns an error to the caller in case rfkill is NULL. Signed-off-by:
Aditya Pakki <pakki001@umn.edu> Link: https://lore.kernel.org/r/20191215153409.21696-1-pakki001@umn.eduSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
- 15 Dec, 2019 12 commits
-
-
Paul Durrant authored
In function xenvif_disconnect_queue(), the value of queue->rx_irq is zeroed *before* queue->task is stopped. Unfortunately that task may call notify_remote_via_irq(queue->rx_irq) and calling that function with a zero value results in a NULL pointer dereference in evtchn_from_irq(). This patch simply re-orders things, stopping all tasks before zero-ing the irq values, thereby avoiding the possibility of the race. Fixes: 2ac061ce ("xen/netback: cleanup init and deinit code") Signed-off-by:
Paul Durrant <pdurrant@amazon.com> Acked-by:
Wei Liu <wei.liu@kernel.org> Signed-off-by:
-
Cristian Birsan authored
Display the return code as decimal integer. Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by:
Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by:
-
Vishal Kulkarni authored
The sge_info debugfs collects offload queue info even when offload capability is disabled and leads to panic. [ 144.139871] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 144.139874] CR2: 0000000000000000 CR3: 000000082d456005 CR4: 00000000001606e0 [ 144.139876] Call Trace: [ 144.139887] sge_queue_start+0x12/0x30 [cxgb4] [ 144.139897] seq_read+0x1d4/0x3d0 [ 144.139906] full_proxy_read+0x50/0x70 [ 144.139913] vfs_read+0x89/0x140 [ 144.139916] ksys_read+0x55/0xd0 [ 144.139924] do_syscall_64+0x5b/0x1d0 [ 144.139933] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 144.139936] RIP: 0033:0x7f4b01493990 Fix this crash by skipping the offload queue access in sge_qinfo when offload capability is disabled Signed-off-by:
Herat Ramani <herat@chelsio.com> Signed-off-by:
Vishal Kulkarni <vishal@chelsio.com> Signed-off-by:
-
Ursula Braun authored
FASTOPEN setsockopt() or sendmsg() may switch the SMC socket to fallback mode. Once fallback mode is active, the native TCP socket functions are called. Nevertheless there is a small race window, when FASTOPEN setsockopt/sendmsg runs in parallel to a connect(), and switch the socket into fallback mode before connect() takes the sock lock. Make sure the SMC-specific connect setup is omitted in this case. This way a syzbot-reported refcount problem is fixed, triggered by different threads running non-blocking connect() and FASTOPEN_KEY setsockopt. Reported-by: syzbot+96d3f9ff6a86d37e44c8@syzkaller.appspotmail.com Fixes: 6d6dd528 ("net/smc: fix refcount non-blocking connect() -part 2") Signed-off-by:
Ursula Braun <ubraun@linux.ibm.com> Signed-off-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
-
Russell King authored
A mismerge between the following two commits: c6787263 ("net: phylink: ensure consistent phy interface mode") 27755ff8 ("net: phylink: Add phylink_mac_link_{up, down} wrapper functions") resulted in the wrong interface being passed to the mac_link_up() function. Fix this up. Fixes: b4b12b0d ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net") Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
This test only works when [1] is applied, which was rejected. Basically, the errors are reported and cleared. In this particular case of tls sockets, following reads will block. The test case was originally submitted with the rejected patch, but, then, was included as part of a different patchset, possibly by mistake. [1] https://lore.kernel.org/netdev/20191007035323.4360-2-jakub.kicinski@netronome.com/#t Thanks Paolo Pisati for pointing out the original patchset where this appeared. Fixes: 65190f77 (selftests/tls: add a test for fragmented messages) Reported-by:
Paolo Pisati <paolo.pisati@canonical.com> Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by:
-
Jakub Kicinski authored
Taehee Yoo says: ==================== gtp: fix several bugs in gtp module This patchset fixes several bugs in the GTP module. 1. Do not allow adding duplicate TID and ms_addr pdp context. In the current code, duplicate TID and ms_addr pdp context could be added. So, RX and TX path could find correct pdp context. 2. Fix wrong condition in ->dumpit() callback. ->dumpit() callback is re-called if dump packet size is too big. So, before return, it saves last position and then restart from last dump position. TID value is used to find last dump position. GTP module allows adding zero TID value. But ->dumpit() callback ignores zero TID value. So, dump would not work correctly if dump packet size too big. 3. Fix use-after-free in ipv4_pdp_find(). RX and TX patch always uses gtp->tid_hash and gtp->addr_hash. but while packet processing, these hash pointer would be freed. So, use-after-free would occur. 4. Fix panic because of zero size hashtable GTP hashtable size could be set by user-space. If hashsize is set to 0, hashtable will not work and panic will occur. ==================== Signed-off-by: -
Taehee Yoo authored
GTP default hashtable size is 1024 and userspace could set specific hashtable size with IFLA_GTP_PDP_HASHSIZE. If hashtable size is set to 0 from userspace, hashtable will not work and panic will occur. Fixes: 459aa660 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
Taehee Yoo authored
ipv4_pdp_find() is called in TX packet path of GTP. ipv4_pdp_find() internally uses gtp->tid_hash to lookup pdp context. In the current code, gtp->tid_hash and gtp->addr_hash are freed by ->dellink(), which is gtp_dellink(). But gtp_dellink() would be called while packets are processing. So, gtp_dellink() should not free gtp->tid_hash and gtp->addr_hash. Instead, dev->priv_destructor() would be used because this callback is called after all packet processing safely. Test commands: ip link add veth1 type veth peer name veth2 ip a a 172.0.0.1/24 dev veth1 ip link set veth1 up ip a a 172.99.0.1/32 dev lo gtp-link add gtp1 & gtp-tunnel add gtp1 v1 200 100 172.99.0.2 172.0.0.2 ip r a 172.99.0.2/32 dev gtp1 ip link set gtp1 mtu 1500 ip netns add ns2 ip link set veth2 netns ns2 ip netns exec ns2 ip a a 172.0.0.2/24 dev veth2 ip netns exec ns2 ip link set veth2 up ip netns exec ns2 ip a a 172.99.0.2/32 dev lo ip netns exec ns2 ip link set lo up ip netns exec ns2 gtp-link add gtp2 & ip netns exec ns2 gtp-tunnel add gtp2 v1 100 200 172.99.0.1 172.0.0.1 ip netns exec ns2 ip r a 172.99.0.1/32 dev gtp2 ip netns exec ns2 ip link set gtp2 mtu 1500 hping3 172.99.0.2 -2 --flood & ip link del gtp1 Splat looks like: [ 72.568081][ T1195] BUG: KASAN: use-after-free in ipv4_pdp_find.isra.12+0x130/0x170 [gtp] [ 72.568916][ T1195] Read of size 8 at addr ffff8880b9a35d28 by task hping3/1195 [ 72.569631][ T1195] [ 72.569861][ T1195] CPU: 2 PID: 1195 Comm: hping3 Not tainted 5.5.0-rc1 #199 [ 72.570547][ T1195] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 72.571438][ T1195] Call Trace: [ 72.571764][ T1195] dump_stack+0x96/0xdb [ 72.572171][ T1195] ? ipv4_pdp_find.isra.12+0x130/0x170 [gtp] [ 72.572761][ T1195] print_address_description.constprop.5+0x1be/0x360 [ 72.573400][ T1195] ? ipv4_pdp_find.isra.12+0x130/0x170 [gtp] [ 72.573971][ T1195] ? ipv4_pdp_find.isra.12+0x130/0x170 [gtp] [ 72.574544][ T1195] __kasan_report+0x12a/0x16f [ 72.575014][ T1195] ? ipv4_pdp_find.isra.12+0x130/0x170 [gtp] [ 72.575593][ T1195] kasan_report+0xe/0x20 [ 72.576004][ T1195] ipv4_pdp_find.isra.12+0x130/0x170 [gtp] [ 72.576577][ T1195] gtp_build_skb_ip4+0x199/0x1420 [gtp] [ ... ] [ 72.647671][ T1195] BUG: unable to handle page fault for address: ffff8880b9a35d28 [ 72.648512][ T1195] #PF: supervisor read access in kernel mode [ 72.649158][ T1195] #PF: error_code(0x0000) - not-present page [ 72.649849][ T1195] PGD a6c01067 P4D a6c01067 PUD 11fb07067 PMD 11f939067 PTE 800fffff465ca060 [ 72.652958][ T1195] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 72.653834][ T1195] CPU: 2 PID: 1195 Comm: hping3 Tainted: G B 5.5.0-rc1 #199 [ 72.668062][ T1195] RIP: 0010:ipv4_pdp_find.isra.12+0x86/0x170 [gtp] [ ... ] [ 72.679168][ T1195] Call Trace: [ 72.679603][ T1195] gtp_build_skb_ip4+0x199/0x1420 [gtp] [ 72.681915][ T1195] ? ipv4_pdp_find.isra.12+0x170/0x170 [gtp] [ 72.682513][ T1195] ? lock_acquire+0x164/0x3b0 [ 72.682966][ T1195] ? gtp_dev_xmit+0x35e/0x890 [gtp] [ 72.683481][ T1195] gtp_dev_xmit+0x3c2/0x890 [gtp] [ ... ] Fixes: 459aa660 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: -
Taehee Yoo authored
gtp_genl_dump_pdp() is ->dumpit() callback of GTP module and it is used to dump pdp contexts. it would be re-executed because of dump packet size. If dump packet size is too big, it saves current dump pointer (gtp interface pointer, bucket, TID value) then it restarts dump from last pointer. Current GTP code allows adding zero TID pdp context but dump code ignores zero TID value. So, last dump pointer will not be found. In addition, this patch adds missing rcu_read_lock() in gtp_genl_dump_pdp(). Fixes: 459aa660 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by:
-
Taehee Yoo authored
GTP RX packet path lookups pdp context with TID. If duplicate TID pdp contexts are existing in the list, it couldn't select correct pdp context. So, TID value should be unique. GTP TX packet path lookups pdp context with ms_addr. If duplicate ms_addr pdp contexts are existing in the list, it couldn't select correct pdp context. So, ms_addr value should be unique. Fixes: 459aa660 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by:
-
Mahesh Bandewar authored
After the recent fix in commit 1899bb32 ("bonding: fix state transition issue in link monitoring"), the active-backup mode with miimon initially come-up fine but after a link-failure, both members transition into backup state. Following steps to reproduce the scenario (eth1 and eth2 are the slaves of the bond): ip link set eth1 up ip link set eth2 down sleep 1 ip link set eth2 up ip link set eth1 down cat /sys/class/net/eth1/bonding_slave/state cat /sys/class/net/eth2/bonding_slave/state Fixes: 1899bb32 ("bonding: fix state transition issue in link monitoring") CC: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
Mahesh Bandewar <maheshb@google.com> Acked-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
-
- 14 Dec, 2019 11 commits
-
-
Jakub Kicinski authored
Manish Chopra says: ==================== bnx2x: bug fixes This series has two driver changes, one to fix some unexpected hardware behaviour casued during the parity error recovery in presence of SR-IOV VFs and another one related for fixing resource management in the driver among the PFs configured on an engine. Please consider applying it to "net". V1->V2: ======= Fix the compilation errors reported by kbuild test robot on the patch #1 with CONFIG_BNX2X_SRIOV=n ==================== Signed-off-by: -
Manish Chopra authored
Driver doesn't calculate total number of PFs configured on a given engine correctly which messed up resources in the PFs loaded on that engine, leading driver to exceed configuration of resources (like vlan filters etc.) beyond the limit per engine, which ended up with asserts from the firmware. Signed-off-by:
Manish Chopra <manishc@marvell.com> Signed-off-by:
Ariel Elior <aelior@marvell.com> Signed-off-by:
-
Manish Chopra authored
Parity error from the hardware will cause PF to lose the state of their VFs due to PF's internal reload and hardware reset following the parity error. Restrict any configuration request from the VFs after the parity as it could cause unexpected hardware behavior, only way for VFs to recover would be to trigger FLR on VFs and reload them. Signed-off-by:
-
Arnd Bergmann authored
Without the common part of the driver, the new file fails to link: drivers/net/ethernet/ti/cpsw_new.o: In function `cpsw_probe': cpsw_new.c:(.text+0x312c): undefined reference to `ti_cm_get_macid' Use the same Makefile hack as before, and build cpsw-common.o for any driver that needs it. Fixes: ed3525ed ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac") Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
-
Arnd Bergmann authored
The new driver misses a dependency: drivers/net/ethernet/ti/cpsw_new.o: In function `cpsw_rx_handler': cpsw_new.c:(.text+0x259c): undefined reference to `__page_pool_put_page' cpsw_new.c:(.text+0x25d0): undefined reference to `page_pool_alloc_pages' drivers/net/ethernet/ti/cpsw_priv.o: In function `cpsw_fill_rx_channels': cpsw_priv.c:(.text+0x22d8): undefined reference to `page_pool_alloc_pages' cpsw_priv.c:(.text+0x2420): undefined reference to `__page_pool_put_page' drivers/net/ethernet/ti/cpsw_priv.o: In function `cpsw_create_xdp_rxqs': cpsw_priv.c:(.text+0x2624): undefined reference to `page_pool_create' drivers/net/ethernet/ti/cpsw_priv.o: In function `cpsw_run_xdp': cpsw_priv.c:(.text+0x2dc8): undefined reference to `__page_pool_put_page' Other drivers use 'select' for PAGE_POOL, so do the same here. Fixes: ed3525ed ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac") Signed-off-by:
Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by:
Jesper Dangaard Brouer <brouer@redhat.com> Reviewed-by:
-
Haiyang Zhang authored
Host can provide send indirection table messages anytime after RSS is enabled by calling rndis_filter_set_rss_param(). So the host provided table values may be overwritten by the initialization in rndis_set_subchannel(). To prevent this problem, move the tx_table initialization before calling rndis_filter_set_rss_param(). Fixes: a6fb6aa3 ("hv_netvsc: Set tx_table to equal weight after subchannels open") Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
Russell King authored
phylink requires the MAC to report when its link status changes when operating in inband modes. Failure to report link status changes means that phylink has no idea when the link events happen, which results in either the network interface's carrier remaining up or remaining permanently down. For example, with a fiber module, if the interface is brought up and link is initially established, taking the link down at the far end will cut the optical power. The SFP module's LOS asserts, we deactivate the link, and the network interface reports no carrier. When the far end is brought back up, the SFP module's LOS deasserts, but the MAC may be slower to establish link. If this happens (which in my tests is a certainty) then phylink never hears that the MAC has established link with the far end, and the network interface is stuck reporting no carrier. This means the interface is non-functional. Avoiding the link interrupt when we have phylink is basically not an option, so remove the !port->phylink from the test. Fixes: 4bb04326 ("net: mvpp2: phylink support") Tested-by:
Sven Auhagen <sven.auhagen@voleatech.de> Tested-by:
Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by:
-
Jakub Kicinski authored
Eric Dumazet says: ==================== tcp: take care of empty skbs in write queue We understood recently that TCP sockets could have an empty skb at the tail of the write queue, leading to various problems. This patch series : 1) Make sure we do not send an empty packet since this was unintended and causing crashes in old kernels. 2) Change tcp_write_queue_empty() to not be fooled by the presence of an empty skb. 3) Fix a bug that could trigger suboptimal epoll() application behavior under memory pressure. ==================== Signed-off-by: -
Eric Dumazet authored
At the time commit ce5ec440 ("tcp: ensure epoll edge trigger wakeup when write queue is empty") was added to the kernel, we still had a single write queue, combining rtx and write queues. Once we moved the rtx queue into a separate rb-tree, testing if sk_write_queue is empty has been suboptimal. Indeed, if we have packets in the rtx queue, we probably want to delay the EPOLLOUT generation at the time incoming packets will free them, making room, but more importantly avoiding flooding application with EPOLLOUT events. Solution is to use tcp_rtx_and_write_queues_empty() helper. Fixes: 75c119af ("tcp: implement rb-tree based retransmit queue") Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
Eric Dumazet authored
Due to how tcp_sendmsg() is implemented, we can have an empty skb at the tail of the write queue. Most [1] tcp_write_queue_empty() callers want to know if there is anything to send (payload and/or FIN) Instead of checking if the sk_write_queue is empty, we need to test if tp->write_seq == tp->snd_nxt [1] tcp_send_fin() was the only caller that expected to see if an skb was in the write queue, I have changed the code to reuse the tcp_write_queue_tail() result. Signed-off-by:
-
Eric Dumazet authored
Backport of commit fdfc5c85 ("tcp: remove empty skb from write queue in error cases") in linux-4.14 stable triggered various bugs. One of them has been fixed in commit ba2ddb43f270 ("tcp: Don't dequeue SYN/FIN-segments from write-queue"), but we still have crashes in some occasions. Root-cause is that when tcp_sendmsg() has allocated a fresh skb and could not append a fragment before being blocked in sk_stream_wait_memory(), tcp_write_xmit() might be called and decide to send this fresh and empty skb. Sending an empty packet is not only silly, it might have caused many issues we had in the past with tp->packets_out being out of sync. Fixes: c65f7f00 ("[TCP]: Simplify SKB data portion allocation with NETIF_F_SG.") Signed-off-by:
Neal Cardwell <ncardwell@google.com> Cc: Jason Baron <jbaron@akamai.com> Acked-by:
-
