- 30 Jul, 2013 5 commits
-
-
Michal Kazior authored
It serves no purpose. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Michal Kazior authored
mac80211 calls for rts/frag threshold hooks before any interface is brought back up again when resuming. We would set vdev parameters before given vdev is created lading to a FW crash. rts/frag thresholds will be re-set accordingly in add_interface() hook anyway. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Michal Kazior authored
mac80211 configures rts/frag thresholds per-hw not per-vif. ath10k FW expects those values to be set per-vdev (i.e. per-vif). ath10k should now respect rts/frag thresholds set before a given interface was brought up. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Michal Kazior authored
It was possible to have a deadlock due to inverted locking of local->iflist_mtx and ath10k->conf_mutex. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Michal Kazior authored
This should fix memory corruption if HIF is tried to be restarted. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
- 26 Jul, 2013 2 commits
-
-
Amitkumar Karwar authored
Some function definitions are moved to appropriate place to avoid forward declarations. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Amitkumar Karwar authored
mwifiex_fw_dpc() asynchronously takes care of firmware download and initialization. Currently the error paths in mwifiex_fw_dpc() are not handled. So if wrong firmware is downloaded, required cleanup work is not performed. memory is leaked and workqueue remains unterminated in this case. mwifiex_terminate_workqueue() is moved to avoid forward declaration. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 25 Jul, 2013 1 commit
-
- 24 Jul, 2013 23 commits
-
-
Hauke Mehrtens authored
bgmac uses bcm47xx_nvram.h which is only available when BCM47XX was selected. Earlier BCMA_HOST_SOC depended on BCM47XX so this was not build on any other archs, but that changed. We should modify this driver to get access to the nvram or the variables through platform data. This fixes a build problem in linux-next reported by Stephen Rothwell: drivers/net/ethernet/broadcom/bgmac.c:19:27: fatal error: bcm47xx_nvram.h: No such file or directory #include <bcm47xx_nvram.h> ^ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Xose Vazquez Perez authored
taken from Ralink linux and windows drivers: 0x1b75, 0x7733 AirLive 450Mbps Wireless-N Dual Band USB Adapter 0x0b05, 0x17bc ASUS USB-N66 450Mbps Dual Band USB Adapter 0x0b05, 0x17ad ASUS USB-N66 Dual Band N Network Adapter 0x050d, 0x1103 Belkin Wireless Adapter 0x148f, 0xf301 Cameo Ralink3573 3x3 single band USB dongle 0x7392, 0x7733 Edimax 0x0e66, 0x0020 Hawking HD45U Dual Band USB Wireless-N Adapter 0x0e66, 0x0021 Hawking HD45U Dual Band Wls-450N Adapter 0x04bb, 0x094e I-O DATA WN-AG450U Wireless LAN Adapter 0x0789, 0x016b Logitec LAN-W450AN/U2 0x0846, 0x9012 NETGEAR WNDA4100 N900 Wireless Dual Band USB Adapter 0x0846, 0x9019 NETGEAR WNDA4200D Wireless Dual Band USB Adapter 0x2019, 0xed19 Planex GW-USDual450 0x148f, 0x3573 Ralink 802.11n USB Wireless LAN Card 0x0df6, 0x0067 Sitecom Wireless Dualband Network Adapter N750 X6 0x0df6, 0x006a Sitecom Wireless Dualband Network Adapter N900 X7 0x0586, 0x3421 ZyXEL Dual-Band Wireless N450 USB Adapter Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: users@rt2x00.serialmonkey.com Cc: linux-wireless@vger.kernel.org Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Sujith Manoharan authored
When antenna diversity combining is enabled in the EEPROM, the initial values for the MAIN/ALT config have to be programmed correctly. This patch adds it for AR9285. Since the diversity combining macros are common to all chip families, remove the redundant AR9285 macros and move the definitions to phy.h. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Avinash Patil authored
We support maximum simultaneous 2 non-AP station interfaces and they can assume role of Station/P2P client/P2P GO. Advertise this support to cfg80211 so that concurrent P2P/STA operation is possible. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Amitkumar Karwar authored
We already have 'struct mwifiex_ie_types_header' with same definition. Hence host_cmd_tlv is removed in this patch. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Amitkumar Karwar authored
For PCIe cards, when wrong firmware is downloaded, firmware is failed to be ready in 10 seconds. We should return an error at this point. But currently we are sending first command to firmware. As expected firmware doesn't respond to this command and command timeout occurs. This patch fixes the problem by removing unnecessary 'ret' variable modifications in "if (ret) {" block. The block is just supposed to update "adapter->winner" flag. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Amitkumar Karwar authored
It is observed that when wrong firmware is downloaded for PCIe card, system hangs for 10 seconds. The reason is mdelay() is used when firmware status is polled. Replace mdelay with msleep(non-blocking API) to fix the issue. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Amitkumar Karwar authored
After downloading the firmware, firmware status is checked by reading a register. Polling interval is 100 msecs. Therefore 100 retries means the status is checked for 10 secs which is more than sufficient for firmware to get ready. This patch removes 1000 retries macro usage, because 100secs time is not practical. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Amitkumar Karwar authored
Clear the data pointer stored in USB interface structure in this handler. This helps to return from mwifiex_usb_disconnect() if driver deinitialization is already performed while handling an error path for mwifiex_usb_probe(). USB8797 card gets enumerated twice. First enumeration is for firmware download and second enumeration expects firmware initialization. mwifiex_usb_probe() always takes care of deinitialization for first enumeration after firmware download. Also, this change matches our handling for SDIO and PCIe interfaces. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Amitkumar Karwar authored
As if_ops.init_if() is called in mwifiex_register(), corresponding cleanup routine should be called in mwifiex_unregister(). Currently it's there in mwifiex_adapter_cleanup(), hence interface specific cleanup is not performed if driver initialization is failed. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Amitkumar Karwar authored
It is already there in mwifiex_unregister(). So unnecessary call in mwifiex_adapter_cleanup() is removed in this patch. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Amitkumar Karwar authored
Currently it is in mwifiex_adapter_cleanup() which doesn't get called if driver initialization is failed causing memory leak. scan_delay_timer is initialized in mwifiex_register(), so it should be deleted in mwifiex_unregister(). Hence it has been moved to appropriate place. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Amitkumar Karwar authored
If reboot command is issued when device is in connected state, system hangs while booting. This issue is fixed by doing cleanup in shutdown handler. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Avinash Patil authored
This patch is bug fix for an invalid boundry check for WPS IE. We should check max IE length against defined macro; instead we were checking it against size of pointer. Fix it. Also move IE length check before allocation of memory. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Stone Piao authored
During P2P handshake, P2P client needs to send deauth after EAPOL FAILURE to GO. We need add bss mode for P2P client when handle deauth request. Without this change, deauth can not be sent out from P2P client side. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Stone Piao authored
Before sending command to firmware, we need to check the frame type. We skip registering the mgmt frame that has already been registered. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Stone Piao authored
Some GO will send deauth or disassoc packet at the end of WPS handshake, which causes P2P connecion failure due to the race condition between event path and data path. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Huawei Yang authored
In function 'mwifiex_write_data_complete' it need tx info to find the mwifiex_private to updates statistics and wake up tx queues. Or we may trigger tx queues timeout when transmitting lots of mgmt frames. Signed-off-by: Huawei Yang <harvey.huawei.yang@gmail.com> Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Avinash Patil authored
Delete packets from TX queues for this mwifiex_private structure when bridged packet count reaches maximum threshold. Bridged packets from each RA List are deleted till they fall to low threshold of 128. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Avinash Patil authored
Maintain total outstanding packet count for RA list instead of total outstanding size as packet count metric seems more reasonable for checking threshold etc. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Avinash Patil authored
pkt_count is used to determine if BA can be formed on this RA list by comparing it with randomly generated BA threshold. The pkt_count variable name here is ambiguous and does not reflect its usage correctly. Rename it to ba_pkt_count. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Huawei Yang authored
Under uAP mode mwifiex may stop all net tx queues on forwarding packets. This may stop some tx queues and they never have chance to be waked up. There is also no need to check tx_pending and stop queues here. Because local host has such kind of check when transmitting packets and it's not proper to have forwarding affect local transmitting. Signed-off-by: Huawei Yang <harvey.huawei.yang@gmail.com> Reviewed-by: Avinash Patil <patila@marvell.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Eric Dumazet authored
Steinar reported reallocations of skb->head with IPv6, leading to a warning in skb_try_coalesce() It turns out iwl3945 has several problems : 1) skb->truesize is underestimated. We really consume PAGE_SIZE bytes for a fragment, not the frame length. 2) 128 bytes of initial headroom is a bit low and forces reallocations. 3) We can avoid consuming a full page for small enough frames. Reported-by: Steinar H. Gunderson <sesse@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Paul Stewart <pstew@google.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 22 Jul, 2013 9 commits
-
-
Vladimir Kondratiev authored
In production code, don't use -Werror, as it causes random compilation failures due to compiler version and options used. With every new version of gcc, it becomes stricter and report more warnings. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Kalle Valo authored
The git tree is in github.com nowadays. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Kalle Valo authored
I forgot to add an entry to MAINTAINERS when submitting the driver. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Kirshenbaum Erez authored
Add support for TCP and UDP HW checksum offloading. RX chain is allways configured for offload mode. In case of checksum error in RX path the DMA L4 error bit(5) will be set to 1 and driver will drop the packet. TX checksum offloading is configrable (ethtool -K). TX descriptors are configured for checksum offload according to the SKB protocol type (TCP/UDP, IPV4/6), Upon mismatch drop the TX packet (checksum required but not TCP/UDP IPV4/6 type). Signed-off-by: Kirshenbaum Erez <erezk@wilocity.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Vladimir Kondratiev authored
Release fragments in the order of allocation; including one for skb head Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Solomon Peachy authored
Note that the driver doesn't directly use this field, but it should be correctly defined in any case. Signed-off-by: Solomon Peachy <pizza@shaftnet.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Sujith Manoharan authored
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Sujith Manoharan authored
* CUS217 specific initvals have to be programmed. * iniAdditional is not used for AR9462/AR9565, remove it. * Handle channel 2484 for regulatory compliance. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Sujith Manoharan authored
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-