- 02 Mar, 2015 40 commits
-
-
Dan Carpenter authored
commit e4940626 upstream. The problem here is that we check: if (dev >= SNDRV_CARDS) Then we increment "dev". if (!joystick_port[dev++]) Then we use it as an offset into a array with SNDRV_CARDS elements. if (!request_region(joystick_port[dev], 8, "Riptide gameport")) { This has 3 effects: 1) If you use the module option to specify the joystick port then it has to be shifted one space over. 2) The wrong error message will be printed on failure if you have over 32 cards. 3) Static checkers will correctly complain that are off by one. Fixes: db1005ec ('ALSA: riptide - Fix joystick resource handling') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Uwe Kleine-König authored
commit 4ff0f034 upstream. The right check for conf_reg to be invalid it testing against -1 not 0 as is done in the rest of the driver. This fixes an oops that can be triggered by: cat /sys/kernel/debug/pinctrl/43fac000.iomuxc/* Fixes: ae75ff81 ("pinctrl: pinctrl-imx: add imx pinctrl core driver") Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> [ luis: backported to 3.16: - file rename: drivers/pinctrl/freescale/pinctrl-imx.c -> drivers/pinctrl/pinctrl-imx.c ] Signed-off-by:
-
Gavin Shan authored
commit 6f20e7f2 upstream. When calling to early_setup(), we pick "boot_paca" up for the master CPU and initialize that with initialise_paca(). At that point, the SLB shadow buffer isn't populated yet. Updating the SLB shadow buffer should corrupt what we had in physical address 0 where the trap instruction is usually stored. This hasn't been observed to cause any trouble in practice, but is obviously fishy. Fixes: 6f4441ef ("powerpc: Dynamically allocate slb_shadow from memblock") Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Sergei Shtylyov authored
commit 2e9dcdae upstream. In case CLK_GATE_HIWORD_MASK flag is passed to clk_register_gate(), the bit # should be no higher than 15, however the corresponding check is obviously off- by-one. Fixes: 04577994 ("clk: gate: add CLK_GATE_HIWORD_MASK") Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
Michael Turquette <mturquette@linaro.org> Signed-off-by:
-
Dan Carpenter authored
commit 86d68a58 upstream. The "> 0" here should ">= 0" so we free map_entries[0]. Fixes: 926172d4 ('efi: Export EFI runtime memory mapping to sysfs') Signed-off-by:
Dave Young <dyoung@redhat.com> Signed-off-by:
Matt Fleming <matt.fleming@intel.com> Signed-off-by:
-
Geert Uytterhoeven authored
commit 7d82bf34 upstream. If the call to devm_kzalloc() fails, nothing must be cleant up. This was missed before because gpio_rcar_probe() had a "return" statement after the first "goto err0". Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Fixes: df0c6c80 ("gpio: rcar: Add minimal runtime PM support") Signed-off-by:
-
Lars-Peter Clausen authored
commit 7331ea47 upstream. Commit f6b2a045 ("ASoC: pxa: mioa701_wm9713: Convert to table based DAPM setup") converted the driver to register the board level DAPM elements with the card's DAPM context rather than the CODEC's DAPM context. The change overlooked that the speaker widget event callback accesses the widget's codec field which is only valid if the widget has been registered in a CODEC DAPM context. This patch modifies the callback to take an alternative route to get the CODEC. Fixes: f6b2a045 ("ASoC: pxa: mioa701_wm9713: Convert to table based DAPM setup") Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Al Viro authored
commit 0a280962 upstream. X-Coverup: just ask spender Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Al Viro authored
commit 7e0e953b upstream. use_pde()/unuse_pde() in ->follow_link()/->put_link() resp. Signed-off-by:
-
Al Viro authored
commit 0db59e59 upstream. As it is, we have debugfs_remove() racing with symlink traversals. Supply ->evict_inode() and do freeing there - inode will remain pinned until we are done with the symlink body. And rip the idiocy with checking if dentry is positive right after we'd verified debugfs_positive(), which is a stronger check... Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
commit 045c47ca upstream. When reading blkio.throttle.io_serviced in a recently created blkio cgroup, it's possible to race against the creation of a throttle policy, which delays the allocation of stats_cpu. Like other functions in the throttle code, just checking for a NULL stats_cpu prevents the following oops caused by that race. [ 1117.285199] Unable to handle kernel paging request for data at address 0x7fb4d0020 [ 1117.285252] Faulting instruction address: 0xc0000000003efa2c [ 1137.733921] Oops: Kernel access of bad area, sig: 11 [#1] [ 1137.733945] SMP NR_CPUS=2048 NUMA PowerNV [ 1137.734025] Modules linked in: bridge stp llc kvm_hv kvm binfmt_misc autofs4 [ 1137.734102] CPU: 3 PID: 5302 Comm: blkcgroup Not tainted 3.19.0 #5 [ 1137.734132] task: c000000f1d188b00 ti: c000000f1d210000 task.ti: c000000f1d210000 [ 1137.734167] NIP: c0000000003efa2c LR: c0000000003ef9f0 CTR: c0000000003ef980 [ 1137.734202] REGS: c000000f1d213500 TRAP: 0300 Not tainted (3.19.0) [ 1137.734230] MSR: 9000000000009032 <SF,HV,EE,ME,IR,DR,RI> CR: 42008884 XER: 20000000 [ 1137.734325] CFAR: 0000000000008458 DAR: 00000007fb4d0020 DSISR: 40000000 SOFTE: 0 GPR00: c0000000003ed3a0 c000000f1d213780 c000000000c59538 0000000000000000 GPR04: 0000000000000800 0000000000000000 0000000000000000 0000000000000000 GPR08: ffffffffffffffff 00000007fb4d0020 00000007fb4d0000 c000000000780808 GPR12: 0000000022000888 c00000000fdc0d80 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 000001003e120200 c000000f1d5b0cc0 0000000000000200 0000000000000000 GPR24: 0000000000000001 c000000000c269e0 0000000000000020 c000000f1d5b0c80 GPR28: c000000000ca3a08 c000000000ca3dec c000000f1c667e00 c000000f1d213850 [ 1137.734886] NIP [c0000000003efa2c] .tg_prfill_cpu_rwstat+0xac/0x180 [ 1137.734915] LR [c0000000003ef9f0] .tg_prfill_cpu_rwstat+0x70/0x180 [ 1137.734943] Call Trace: [ 1137.734952] [c000000f1d213780] [d000000005560520] 0xd000000005560520 (unreliable) [ 1137.734996] [c000000f1d2138a0] [c0000000003ed3a0] .blkcg_print_blkgs+0xe0/0x1a0 [ 1137.735039] [c000000f1d213960] [c0000000003efb50] .tg_print_cpu_rwstat+0x50/0x70 [ 1137.735082] [c000000f1d2139e0] [c000000000104b48] .cgroup_seqfile_show+0x58/0x150 [ 1137.735125] [c000000f1d213a70] [c0000000002749dc] .kernfs_seq_show+0x3c/0x50 [ 1137.735161] [c000000f1d213ae0] [c000000000218630] .seq_read+0xe0/0x510 [ 1137.735197] [c000000f1d213bd0] [c000000000275b04] .kernfs_fop_read+0x164/0x200 [ 1137.735240] [c000000f1d213c80] [c0000000001eb8e0] .__vfs_read+0x30/0x80 [ 1137.735276] [c000000f1d213cf0] [c0000000001eb9c4] .vfs_read+0x94/0x1b0 [ 1137.735312] [c000000f1d213d90] [c0000000001ebb38] .SyS_read+0x58/0x100 [ 1137.735349] [c000000f1d213e30] [c000000000009218] syscall_exit+0x0/0x98 [ 1137.735383] Instruction dump: [ 1137.735405] 7c6307b4 7f891800 409d00b8 60000000 60420000 3d420004 392a63b0 786a1f24 [ 1137.735471] 7d49502a e93e01c8 7d495214 7d2ad214 <7cead02a> e9090008 e9490010 e9290018 And here is one code that allows to easily reproduce this, although this has first been found by running docker. void run(pid_t pid) { int n; int status; int fd; char *buffer; buffer = memalign(BUFFER_ALIGN, BUFFER_SIZE); n = snprintf(buffer, BUFFER_SIZE, "%d\n", pid); fd = open(CGPATH "/test/tasks", O_WRONLY); write(fd, buffer, n); close(fd); if (fork() > 0) { fd = open("/dev/sda", O_RDONLY | O_DIRECT); read(fd, buffer, 512); close(fd); wait(&status); } else { fd = open(CGPATH "/test/blkio.throttle.io_serviced", O_RDONLY); n = read(fd, buffer, BUFFER_SIZE); close(fd); } free(buffer); exit(0); } void test(void) { int status; mkdir(CGPATH "/test", 0666); if (fork() > 0) wait(&status); else run(getpid()); rmdir(CGPATH "/test"); } int main(int argc, char **argv) { int i; for (i = 0; i < NR_TESTS; i++) test(); return 0; } Reported-by:
Ricardo Marin Matinata <rmm@br.ibm.com> Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Jay Lan authored
commit 14675592 upstream. The output of KDB 'summary' command should report MemTotal, MemFree and Buffers output in kB. Current codes report in unit of pages. A define of K(x) as is defined in the code, but not used. This patch would apply the define to convert the values to kB. Please include me on Cc on replies. I do not subscribe to linux-kernel. Signed-off-by:
Jay Lan <jlan@sgi.com> Signed-off-by:
Jason Wessel <jason.wessel@windriver.com> Signed-off-by:
-
James Hogan authored
commit ca5d2564 upstream. Export the _save_msa asm function used by the lose_fpu(1) macro to GPL modules so that KVM can make use of it when it is built as a module. This fixes the following build error when CONFIG_KVM=m and CONFIG_CPU_HAS_MSA=y due to commit f798217d ("KVM: MIPS: Don't leak FPU/DSP to guest"): ERROR: "_save_msa" [arch/mips/kvm/kvm.ko] undefined! Fixes: f798217d (KVM: MIPS: Don't leak FPU/DSP to guest) Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9261/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
James Hogan authored
commit 3ce465e0 upstream. Export the _save_fp asm function used by the lose_fpu(1) macro to GPL modules so that KVM can make use of it when it is built as a module. This fixes the following build error when CONFIG_KVM=m due to commit f798217d ("KVM: MIPS: Don't leak FPU/DSP to guest"): ERROR: "_save_fp" [arch/mips/kvm/kvm.ko] undefined! Signed-off-by:
-
Ilya Dryomov authored
commit 7eb71e03 upstream. It turns out it's possible to get __remove_osd() called twice on the same OSD. That doesn't sit well with rb_erase() - depending on the shape of the tree we can get a NULL dereference, a soft lockup or a random crash at some point in the future as we end up touching freed memory. One scenario that I was able to reproduce is as follows: <osd3 is idle, on the osd lru list> <con reset - osd3> con_fault_finish() osd_reset() <osdmap - osd3 down> ceph_osdc_handle_map() <takes map_sem> kick_requests() <takes request_mutex> reset_changed_osds() __reset_osd() __remove_osd() <releases request_mutex> <releases map_sem> <takes map_sem> <takes request_mutex> __kick_osd_requests() __reset_osd() __remove_osd() <-- !!! A case can be made that osd refcounting is imperfect and reworking it would be a proper resolution, but for now Sage and I decided to fix this by adding a safe guard around __remove_osd(). Fixes: http://tracker.ceph.com/issues/8087 Cc: Sage Weil <sage@redhat.com> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
Sage Weil <sage@redhat.com> Reviewed-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Ilya Dryomov authored
commit cc9f1f51 upstream. No reason to use BUG_ON for osd request list assertions. Signed-off-by:
Ilya Dryomov <idryomov@redhat.com> Reviewed-by:
-
Ilya Dryomov authored
commit 7c6e6fc5 upstream. It is important that both regular and lingering requests lists are empty when the OSD is removed. Signed-off-by:
Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by:
-
Hector Marco-Gisbert authored
commit 4e7c22d4 upstream. The issue is that the stack for processes is not properly randomized on 64 bit architectures due to an integer overflow. The affected function is randomize_stack_top() in file "fs/binfmt_elf.c": static unsigned long randomize_stack_top(unsigned long stack_top) { unsigned int random_variable = 0; if ((current->flags & PF_RANDOMIZE) && !(current->personality & ADDR_NO_RANDOMIZE)) { random_variable = get_random_int() & STACK_RND_MASK; random_variable <<= PAGE_SHIFT; } return PAGE_ALIGN(stack_top) + random_variable; return PAGE_ALIGN(stack_top) - random_variable; } Note that, it declares the "random_variable" variable as "unsigned int". Since the result of the shifting operation between STACK_RND_MASK (which is 0x3fffff on x86_64, 22 bits) and PAGE_SHIFT (which is 12 on x86_64): random_variable <<= PAGE_SHIFT; then the two leftmost bits are dropped when storing the result in the "random_variable". This variable shall be at least 34 bits long to hold the (22+12) result. These two dropped bits have an impact on the entropy of process stack. Concretely, the total stack entropy is reduced by four: from 2^28 to 2^30 (One fourth of expected entropy). This patch restores back the entropy by correcting the types involved in the operations in the functions randomize_stack_top() and stack_maxrandom_size(). The successful fix can be tested with: $ for i in `seq 1 10`; do cat /proc/self/maps | grep stack; done 7ffeda566000-7ffeda587000 rw-p 00000000 00:00 0 [stack] 7fff5a332000-7fff5a353000 rw-p 00000000 00:00 0 [stack] 7ffcdb7a1000-7ffcdb7c2000 rw-p 00000000 00:00 0 [stack] 7ffd5e2c4000-7ffd5e2e5000 rw-p 00000000 00:00 0 [stack] ... Once corrected, the leading bytes should be between 7ffc and 7fff, rather than always being 7fff. Signed-off-by:
Hector Marco-Gisbert <hecmargi@upv.es> Signed-off-by:
Ismael Ripoll <iripoll@upv.es> [ Rebased, fixed 80 char bugs, cleaned up commit message, added test example and CVE ] Signed-off-by:
Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Fixes: CVE-2015-1593 Link: http://lkml.kernel.org/r/20150214173350.GA18393@www.outflux.netSigned-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Arnd Bergmann authored
commit 61882b63 upstream. The two functions s3c2416_cpufreq_driver_init and s3c_cpufreq_register are marked init but are called from a context that might be run after the __init sections are discarded, as the compiler points out: WARNING: vmlinux.o(.data+0x1ad9dc): Section mismatch in reference from the variable s3c2416_cpufreq_driver to the function .init.text:s3c2416_cpufreq_driver_init() WARNING: drivers/built-in.o(.text+0x35b5dc): Section mismatch in reference from the function s3c2410a_cpufreq_add() to the function .init.text:s3c_cpufreq_register() This removes the __init markings. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Mikulas Patocka authored
commit 22aa66a3 upstream. When the snapshot target is unloaded, snapshot_dtr() waits until pending_exceptions_count drops to zero. Then, it destroys the snapshot. Therefore, the function that decrements pending_exceptions_count should not touch the snapshot structure after the decrement. pending_complete() calls free_pending_exception(), which decrements pending_exceptions_count, and then it performs up_write(&s->lock) and it calls retry_origin_bios() which dereferences s->origin. These two memory accesses to the fields of the snapshot may touch the dm_snapshot struture after it is freed. This patch moves the call to free_pending_exception() to the end of pending_complete(), so that the snapshot will not be destroyed while pending_complete() is in progress. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Mikulas Patocka authored
commit 2bec1f4a upstream. The function dm_get_md finds a device mapper device with a given dev_t, increases the reference count and returns the pointer. dm_get_md calls dm_find_md, dm_find_md takes _minor_lock, finds the device, tests that the device doesn't have DMF_DELETING or DMF_FREEING flag, drops _minor_lock and returns pointer to the device. dm_get_md then calls dm_get. dm_get calls BUG if the device has the DMF_FREEING flag, otherwise it increments the reference count. There is a possible race condition - after dm_find_md exits and before dm_get is called, there are no locks held, so the device may disappear or DMF_FREEING flag may be set, which results in BUG. To fix this bug, we need to call dm_get while we hold _minor_lock. This patch renames dm_find_md to dm_get_md and changes it so that it calls dm_get while holding the lock. Signed-off-by:
-
John Stultz authored
commit 29183a70 upstream. Additional validation of adjtimex freq values to avoid potential multiplication overflows were added in commit 5e5aeb43 (time: adjtimex: Validate the ADJ_FREQUENCY values) Unfortunately the patch used LONG_MAX/MIN instead of LLONG_MAX/MIN, which was fine on 64-bit systems, but being much smaller on 32-bit systems caused false positives resulting in most direct frequency adjustments to fail w/ EINVAL. ntpd only does direct frequency adjustments at startup, so the issue was not as easily observed there, but other time sync applications like ptpd and chrony were more effected by the bug. See bugs: https://bugzilla.kernel.org/show_bug.cgi?id=92481 https://bugzilla.redhat.com/show_bug.cgi?id=1188074 This patch changes the checks to use LLONG_MAX for clarity, and additionally the checks are disabled on 32-bit systems since LLONG_MAX/PPM_SCALE is always larger then the 32-bit long freq value, so multiplication overflows aren't possible there. Reported-by:
Josh Boyer <jwboyer@fedoraproject.org> Reported-by:
George Joseph <george.joseph@fairview5.com> Tested-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Sasha Levin <sasha.levin@oracle.com> Link: http://lkml.kernel.org/r/1423553436-29747-1-git-send-email-john.stultz@linaro.org [ Prettified the changelog and the comments a bit. ] Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Sasha Levin authored
commit 5e5aeb43 upstream. Verify that the frequency value from userspace is valid and makes sense. Unverified values can cause overflows later on. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> [jstultz: Fix up bug for negative values and drop redunent cap check] Signed-off-by:
-
Sebastian Andrzej Siewior authored
commit 8d1e5a1a upstream. With task_blocks_on_rt_mutex() returning early -EDEADLK we never add the waiter to the waitqueue. Later, we try to remove it via remove_waiter() and go boom in rt_mutex_top_waiter() because rb_entry() gives a NULL pointer. ( Tested on v3.18-RT where rtmutex is used for regular mutex and I tried to get one twice in a row. ) Not sure when this started but I guess 397335f0 ("rtmutex: Fix deadlock detector for real") or commit 3d5c9340 ("rtmutex: Handle deadlock detection smarter"). Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by:
-
NeilBrown authored
commit 26ac1073 upstream. Commit a7854487: md: When RAID5 is dirty, force reconstruct-write instead of read-modify-write. Causes an RCW cycle to be forced even when the array is degraded. A degraded array cannot support RCW as that requires reading all data blocks, and one may be missing. Forcing an RCW when it is not possible causes a live-lock and the code spins, repeatedly deciding to do something that cannot succeed. So change the condition to only force RCW on non-degraded arrays. Reported-by:
Manibalan P <pmanibalan@amiindia.co.in> Bisected-by:
Jes Sorensen <Jes.Sorensen@redhat.com> Tested-by:
NeilBrown <neilb@suse.de> Fixes: a7854487Signed-off-by:
-
Markos Chandras authored
commit acac4108 upstream. The "addi" instruction will trap on overflows which is not something we need in this code, so we replace that with "addiu". Link: http://www.linux-mips.org/archives/linux-mips/2015-01/msg00430.html Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Paul Burton <paul.burton@imgtec.com> Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com> Signed-off-by:
-
Markos Chandras authored
commit 98a833c1 upstream. The "add" instruction is actually a macro in binutils and depending on the size of the immediate it can expand to an "addi" instruction. However, the "addi" instruction traps on overflows which is not something we want on address calculation. Link: http://www.linux-mips.org/archives/linux-mips/2015-01/msg00121.html Cc: Paul Burton <paul.burton@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by:
-
Daniel J Blueman authored
commit 0c510cc8 upstream. When DRAM errors occur on memory controllers after EDAC_MAX_MCS (16), the kernel fatally dereferences unallocated structures, see splat below; this occurs on at least NumaConnect systems. Fix by checking if a memory controller info structure was found. BUG: unable to handle kernel NULL pointer dereference at 0000000000000320 IP: [<ffffffff819f714f>] decode_bus_error+0x2f/0x2b0 PGD 2f8b5a3067 PUD 2f8b5a2067 PMD 0 Oops: 0000 [#2] SMP Modules linked in: CPU: 224 PID: 11930 Comm: stream_c.exe.gn Tainted: G D 3.19.0 #1 Hardware name: Supermicro H8QGL/H8QGL, BIOS 3.5b 01/28/2015 task: ffff8807dbfb8c00 ti: ffff8807dd16c000 task.ti: ffff8807dd16c000 RIP: 0010:[<ffffffff819f714f>] [<ffffffff819f714f>] decode_bus_error+0x2f/0x2b0 RSP: 0000:ffff8907dfc03c48 EFLAGS: 00010297 RAX: 0000000000000001 RBX: 9c67400010080a13 RCX: 0000000000001dc6 RDX: 000000001dc61dc6 RSI: ffff8907dfc03df0 RDI: 000000000000001c RBP: ffff8907dfc03ce8 R08: 0000000000000000 R09: 0000000000000022 R10: ffff891fffa30380 R11: 00000000001cfc90 R12: 0000000000000008 R13: 0000000000000000 R14: 000000000000001c R15: 00009c6740001000 FS: 00007fa97ee18700(0000) GS:ffff8907dfc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000320 CR3: 0000003f889b8000 CR4: 00000000000407e0 Stack: 0000000000000000 ffff8907dfc03df0 0000000000000008 9c67400010080a13 000000000000001c 00009c6740001000 ffff8907dfc03c88 ffffffff810e4f9a ffff8907dfc03ce8 ffffffff81b375b9 0000000000000000 0000000000000010 Call Trace: <IRQ> ? vprintk_default ? printk amd_decode_mce notifier_call_chain atomic_notifier_call_chain mce_log machine_check_poll mce_timer_fn ? mce_cpu_restart call_timer_fn.isra.29 run_timer_softirq __do_softirq irq_exit smp_apic_timer_interrupt apic_timer_interrupt <EOI> ? down_read_trylock __do_page_fault ? __schedule do_page_fault page_fault Signed-off-by:
Daniel J Blueman <daniel@numascale.com> Link: http://lkml.kernel.org/r/1424144078-24589-1-git-send-email-daniel@numascale.com [ Boris: massage commit message ] Signed-off-by:
-
Mitko Haralanov authored
commit 18c0b82a upstream. This changeset removes all the code that allows the driver to write to the EEPROM and update the recorded error counters and power on hours. These two stats are unused and writing them exposes a timing risk which could leave the EEPROM in a bad state preventing further normal operation of the HCA. Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
-
Tony Battersby authored
commit 3b524a68 upstream. Fix SCSI generic read() incorrectly returning success after detecting an error. Signed-off-by:
Tony Battersby <tonyb@cybernetics.com> Acked-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
Minh Duc Tran authored
fixed invalid assignment of 64bit mask to host dma_boundary for scatter gather segment boundary limit. commit f76a610a upstream. In reference to bug https://bugzilla.redhat.com/show_bug.cgi?id=1097141 Assert is seen with AMD cpu whenever calling pci_alloc_consistent. [ 29.406183] ------------[ cut here ]------------ [ 29.410505] kernel BUG at lib/iommu-helper.c:13! Signed-off-by:
Minh Tran <minh.tran@emulex.com> Fixes: 6733b39aSigned-off-by:
-
honclo authored
commit eb71f8a5 upstream. The tpm_ibmvtpm module is affected by an unaligned access problem. ibmvtpm_crq_get_version failed with rc=-4 during boot when vTPM is enabled in Power partition, which supports both little endian and big endian modes. We added little endian support to fix this problem: 1) added cpu_to_be64 calls to ensure BE data is sent from an LE OS. 2) added be16_to_cpu and be32_to_cpu calls to make sure data received is in LE format on a LE OS. Signed-off-by:
Hon Ching(Vicky) Lo <honclo@linux.vnet.ibm.com> Signed-off-by:
Joy Latten <jmlatten@linux.vnet.ibm.com> [phuewe: manually applied the patch :( ] Reviewed-by:
Ashley Lai <ashley@ahsleylai.com> Signed-off-by:
Peter Huewe <peterhuewe@gmx.de> Signed-off-by:
-
Filipe Manana authored
commit 1a4bcf47 upstream. We have a scenario where after the fsync log replay we can lose file data that had been previously fsync'ed if we added an hard link for our inode and after that we sync'ed the fsync log (for example by fsync'ing some other file or directory). This is because when adding an hard link we updated the inode item in the log tree with an i_size value of 0. At that point the new inode item was in memory only and a subsequent fsync log replay would not make us lose the file data. However if after adding the hard link we sync the log tree to disk, by fsync'ing some other file or directory for example, we ended up losing the file data after log replay, because the inode item in the persisted log tree had an an i_size of zero. This is easy to reproduce, and the following excerpt from my test for xfstests shows this: _scratch_mkfs >> $seqres.full 2>&1 _init_flakey _mount_flakey # Create one file with data and fsync it. # This made the btrfs fsync log persist the data and the inode metadata with # a correct inode->i_size (4096 bytes). $XFS_IO_PROG -f -c "pwrite -S 0xaa -b 4K 0 4K" -c "fsync" \ $SCRATCH_MNT/foo | _filter_xfs_io # Now add one hard link to our file. This made the btrfs code update the fsync # log, in memory only, with an inode metadata having a size of 0. ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link # Now force persistence of the fsync log to disk, for example, by fsyncing some # other file. touch $SCRATCH_MNT/bar $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/bar # Before a power loss or crash, we could read the 4Kb of data from our file as # expected. echo "File content before:" od -t x1 $SCRATCH_MNT/foo # Simulate a crash/power loss. _load_flakey_table $FLAKEY_DROP_WRITES _unmount_flakey _load_flakey_table $FLAKEY_ALLOW_WRITES _mount_flakey # After the fsync log replay, because the fsync log had a value of 0 for our # inode's i_size, we couldn't read anymore the 4Kb of data that we previously # wrote and fsync'ed. The size of the file became 0 after the fsync log replay. echo "File content after:" od -t x1 $SCRATCH_MNT/foo Another alternative test, that doesn't need to fsync an inode in the same transaction it was created, is: _scratch_mkfs >> $seqres.full 2>&1 _init_flakey _mount_flakey # Create our test file with some data. $XFS_IO_PROG -f -c "pwrite -S 0xaa -b 8K 0 8K" \ $SCRATCH_MNT/foo | _filter_xfs_io # Make sure the file is durably persisted. sync # Append some data to our file, to increase its size. $XFS_IO_PROG -f -c "pwrite -S 0xcc -b 4K 8K 4K" \ $SCRATCH_MNT/foo | _filter_xfs_io # Fsync the file, so from this point on if a crash/power failure happens, our # new data is guaranteed to be there next time the fs is mounted. $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo # Add one hard link to our file. This made btrfs write into the in memory fsync # log a special inode with generation 0 and an i_size of 0 too. Note that this # didn't update the inode in the fsync log on disk. ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link # Now make sure the in memory fsync log is durably persisted. # Creating and fsync'ing another file will do it. touch $SCRATCH_MNT/bar $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/bar # As expected, before the crash/power failure, we should be able to read the # 12Kb of file data. echo "File content before:" od -t x1 $SCRATCH_MNT/foo # Simulate a crash/power loss. _load_flakey_table $FLAKEY_DROP_WRITES _unmount_flakey _load_flakey_table $FLAKEY_ALLOW_WRITES _mount_flakey # After mounting the fs again, the fsync log was replayed. # The btrfs fsync log replay code didn't update the i_size of the persisted # inode because the inode item in the log had a special generation with a # value of 0 (and it couldn't know the correct i_size, since that inode item # had a 0 i_size too). This made the last 4Kb of file data inaccessible and # effectively lost. echo "File content after:" od -t x1 $SCRATCH_MNT/foo This isn't a new issue/regression. This problem has been around since the log tree code was added in 2008: Btrfs: Add a write ahead tree log to optimize synchronous operations (commit e02119d5) Test cases for xfstests follow soon. Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
Nicholas Bellinger authored
commit aa179935 upstream. This patch adds a check to sbc_parse_cdb() in order to detect when an LBA + sector vs. end-of-device calculation wraps when the LBA is sufficently large enough (eg: 0xFFFFFFFFFFFFFFFF). Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Nicholas Bellinger authored
commit 8e575c50 upstream. This patch adds a check to sbc_setup_write_same() to verify the incoming WRITE_SAME LBA + number of blocks does not exceed past the end-of-device. Also check for potential LBA wrap-around as well. Reported-by:
Bart Van Assche <bart.vanassche@sandisk.com> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Trond Myklebust authored
commit f4086a3d upstream. Commit 411a99ad (nfs: clear_request_commit while holding i_lock) assumes that the nfs_commit_info always points to the inode->i_lock. For historical reasons, that is not the case for O_DIRECT writes. Cc: Weston Andros Adamson <dros@primarydata.com> Fixes: 411a99ad ("nfs: clear_request_commit while holding i_lock") Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Darrick J. Wong authored
commit 37527b86 upstream. I created a dm-raid1 device backed by a device that supports DISCARD and another device that does NOT support DISCARD with the following dm configuration: # echo '0 2048 mirror core 1 512 2 /dev/sda 0 /dev/sdb 0' | dmsetup create moo # lsblk -D NAME DISC-ALN DISC-GRAN DISC-MAX DISC-ZERO sda 0 4K 1G 0 `-moo (dm-0) 0 4K 1G 0 sdb 0 0B 0B 0 `-moo (dm-0) 0 4K 1G 0 Notice that the mirror device /dev/mapper/moo advertises DISCARD support even though one of the mirror halves doesn't. If I issue a DISCARD request (via fstrim, mount -o discard, or ioctl BLKDISCARD) through the mirror, kmirrord gets stuck in an infinite loop in do_region() when it tries to issue a DISCARD request to sdb. The problem is that when we call do_region() against sdb, num_sectors is set to zero because q->limits.max_discard_sectors is zero. Therefore, "remaining" never decreases and the loop never terminates. To fix this: before entering the loop, check for the combination of REQ_DISCARD and no discard and return -EOPNOTSUPP to avoid hanging up the mirror device. This bug was found by the unfortunate coincidence of pvmove and a discard operation in the RHEL 6.5 kernel; upstream is also affected. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Acked-by:
"Martin K. Petersen" <martin.petersen@oracle.com> Signed-off-by:
-
Mikulas Patocka authored
commit f2ed51ac upstream. It may be possible that a device claims discard support but it rejects discards with -EOPNOTSUPP. It happens when using loopback on ext2/ext3 filesystem driven by the ext4 driver. It may also happen if the underlying devices are moved from one disk on another. If discard error happens, we reject the bio with -EOPNOTSUPP, but we do not degrade the array. This patch fixes failed test shell/lvconvert-repair-transient.sh in the lvm2 testsuite if the testsuite is extracted on an ext2 or ext3 filesystem and it is being driven by the ext4 driver. Signed-off-by:
-
Chen Jie authored
commit 164c2406 upstream. sm->offset maybe wrong but magic maybe right, the offset do not have CRC. Badness at c00c7580 [verbose debug info unavailable] NIP: c00c7580 LR: c00c718c CTR: 00000014 REGS: df07bb40 TRAP: 0700 Not tainted (2.6.34.13-WR4.3.0.0_standard) MSR: 00029000 <EE,ME,CE> CR: 22084f84 XER: 00000000 TASK = df84d6e0[908] 'mount' THREAD: df07a000 GPR00: 00000001 df07bbf0 df84d6e0 00000000 00000001 00000000 df07bb58 00000041 GPR08: 00000041 c0638860 00000000 00000010 22084f88 100636c8 df814ff8 00000000 GPR16: df84d6e0 dfa558cc c05adb90 00000048 c0452d30 00000000 000240d0 000040d0 GPR24: 00000014 c05ae734 c05be2e0 00000000 00000001 00000000 00000000 c05ae730 NIP [c00c7580] __alloc_pages_nodemask+0x4d0/0x638 LR [c00c718c] __alloc_pages_nodemask+0xdc/0x638 Call Trace: [df07bbf0] [c00c718c] __alloc_pages_nodemask+0xdc/0x638 (unreliable) [df07bc90] [c00c7708] __get_free_pages+0x20/0x48 [df07bca0] [c00f4a40] __kmalloc+0x15c/0x1ec [df07bcd0] [c01fc880] jffs2_scan_medium+0xa58/0x14d0 [df07bd70] [c01ff38c] jffs2_do_mount_fs+0x1f4/0x6b4 [df07bdb0] [c020144c] jffs2_do_fill_super+0xa8/0x260 [df07bdd0] [c020230c] jffs2_fill_super+0x104/0x184 [df07be00] [c0335814] get_sb_mtd_aux+0x9c/0xec [df07be20] [c033596c] get_sb_mtd+0x84/0x1e8 [df07be60] [c0201ed0] jffs2_get_sb+0x1c/0x2c [df07be70] [c0103898] vfs_kern_mount+0x78/0x1e8 [df07bea0] [c0103a58] do_kern_mount+0x40/0x100 [df07bec0] [c011fe90] do_mount+0x240/0x890 [df07bf10] [c0120570] sys_mount+0x90/0xd8 [df07bf40] [c00110d8] ret_from_syscall+0x0/0x4 === Exception: c01 at 0xff61a34 LR = 0x100135f0 Instruction dump: 38800005 38600000 48010f41 4bfffe1c 4bfc2d15 4bfffe8c 72e90200 4082fc28 3d20c064 39298860 8809000d 68000001 <0f000000> 2f800000 419efc0c 38000001 mount: mounting /dev/mtdblock3 on /common failed: Input/output error Signed-off-by:
Chen Jie <chenjie6@huawei.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> Signed-off-by:
-
Adrian Knoth authored
commit f0153c3d upstream. RME RayDAT and AIO use a fixed buffer size of 16384 samples. With period sizes of 32-4096, this translates to 4-512 periods. The older RME cards have a variable buffer size but require exactly two periods. This patch enforces nperiods=2 on those cards. Signed-off-by:
Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by:
-
