- 01 Apr, 2017 2 commits
-
-
Mark Brown authored
This driver uses interfaces from linux/of.h and linux/property.h but relies on implict inclusion of those headers which means that changes in other headers could break the build, as happened in -next for arm today. Add a explicit includes. Signed-off-by:
Mark Brown <broonie@kernel.org> Acked-by:
Joel Stanley <joel@jms.id.au> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daode Huang authored
The current code only supports DT to check SFP present. This patch adds ACPI support as well. Signed-off-by:
Daode Huang <huangdaode@hisilicon.com> Reviewed-by:
Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
-
- 30 Mar, 2017 5 commits
-
-
Suresh Reddy authored
Use cpu_to_le32() for link_config variable in set_logical_link_config command as this variable is of type u32. Signed-off-by:
Suresh Reddy <suresh.reddy@broadcom.com> Signed-off-by:
-
Xin Long authored
When sending a msg without asoc established, sctp will send INIT packet first and then enqueue chunks. Before receiving INIT_ACK, stream info is not yet alloced. But enqueuing chunks needs to access stream info, like out stream state and out stream cnt. This patch is to fix it by allocing out stream info when initializing an asoc, allocing in stream and re-allocing out stream when processing init. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Andrey Konovalov authored
When calculating po->tp_hdrlen + po->tp_reserve the result can overflow. Fix by checking that tp_reserve <= INT_MAX on assign. Signed-off-by:
Andrey Konovalov <andreyknvl@google.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Andrey Konovalov authored
When calculating rb->frames_per_block * req->tp_block_nr the result can overflow. Add a check that tp_block_size * tp_block_nr <= UINT_MAX. Since frames_per_block <= tp_block_size, the expression would never overflow. Signed-off-by:
-
Andrey Konovalov authored
Subtracting tp_sizeof_priv from tp_block_size and casting to int to check whether one is less then the other doesn't always work (both of them are unsigned ints). Compare them as is instead. Also cast tp_sizeof_priv to u64 before using BLK_PLUS_PRIV, as it can overflow inside BLK_PLUS_PRIV otherwise. Signed-off-by:
-
- 29 Mar, 2017 15 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains a rather large update with Netfilter fixes, specifically targeted to incorrect RCU usage in several spots and the userspace conntrack helper infrastructure (nfnetlink_cthelper), more specifically they are: 1) expect_class_max is incorrect set via cthelper, as in kernel semantics mandate that this represents the array of expectation classes minus 1. Patch from Liping Zhang. 2) Expectation policy updates via cthelper are currently broken for several reasons: This code allows illegal changes in the policy such as changing the number of expeciation classes, it is leaking the updated policy and such update occurs with no RCU protection at all. Fix this by adding a new nfnl_cthelper_update_policy() that describes what is really legal on the update path. 3) Fix several memory leaks in cthelper, from Jeffy Chen. 4) synchronize_rcu() is missing in the removal path of several modules, this may lead to races since CPU may still be running on code that has just gone. Also from Liping Zhang. 5) Don't use the helper hashtable from cthelper, it is not safe to walk over those bits without the helper mutex. Fix this by introducing a new independent list for userspace helpers. From Liping Zhang. 6) nf_ct_extend_unregister() needs synchronize_rcu() to make sure no packets are walking on any conntrack extension that is gone after module removal, again from Liping. 7) nf_nat_snmp may crash if we fail to unregister the helper due to accidental leftover code, from Gao Feng. 8) Fix leak in nfnetlink_queue with secctx support, from Liping Zhang. ==================== Signed-off-by: -
Zakharov Vlad authored
After a new NAPI_STATE_MISSED state was added to NAPI we can get into this state and in such case we have to reschedule NAPI as some work is still pending and we have to process it. napi_complete_done() function returns false if we have to reschedule something (e.g. in case we were in MISSED state) as current polling have not been completed yet. nps_enet driver hasn't been verifying the return value of napi_complete_done() and has been forcibly enabling interrupts. That is not correct as we should not enable interrupts before we have processed all scheduled work. As a result we were getting trapped in interrupt hanlder chain as we had never been able to disabale ethernet interrupts again. So this patch makes nps_enet_poll() func verify return value of napi_complete_done() and enable interrupts only in case all scheduled work has been completed. Signed-off-by:
Vlad Zakharov <vzakhar@synopsys.com> Signed-off-by:
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: Small misc. fixes. Fix a NULL pointer crash in open failure path, wrong arguments when printing error messages, and a DMA unmap bug in XDP shutdown path. ==================== Signed-off-by: -
Michael Chan authored
In bnxt_free_rx_skbs(), which is called to free up all RX buffers during shutdown, we need to unmap the page if we are running in XDP mode. Fixes: c61fb99c ("bnxt_en: Add RX page mode support.") Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Sankar Patchineelam authored
Signed-off-by:
Sankar Patchineelam <sankar.patchineelam@broadcom.com> Signed-off-by:
-
Sankar Patchineelam authored
Net device reset can fail when the h/w or f/w is in a bad state. Subsequent netdevice open fails in bnxt_hwrm_stat_ctx_alloc(). The cleanup invokes bnxt_hwrm_resource_free() which inturn calls bnxt_disable_int(). In this routine, the code segment if (ring->fw_ring_id != INVALID_HW_RING_ID) BNXT_CP_DB(cpr->cp_doorbell, cpr->cp_raw_cons); results in NULL pointer dereference as cpr->cp_doorbell is not yet initialized, and fw_ring_id is zero. The fix is to initialize cpr fw_ring_id to INVALID_HW_RING_ID before bnxt_init_chip() is invoked. Signed-off-by:
-
Guillaume Nault authored
The Rx path may grab the socket right before pppol2tp_release(), but nothing guarantees that it will enqueue packets before skb_queue_purge(). Therefore, the socket can be destroyed without its queues fully purged. Fix this by purging queues in pppol2tp_session_destruct() where we're guaranteed nothing is still referencing the socket. Fixes: 9e9cb622 ("l2tp: fix userspace reception on plain L2TP sockets") Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
Guillaume Nault authored
The code following l2tp_tunnel_find() expects that a new reference is held on sk. Either sk_receive_skb() or the discard_put error path will drop a reference from the tunnel's socket. This issue exists in both l2tp_ip and l2tp_ip6. Fixes: a3c18422 ("l2tp: hold socket before dropping lock in l2tp_ip{, 6}_recv()") Signed-off-by:
-
Liping Zhang authored
We must call security_release_secctx to free the memory returned by security_secid_to_secctx, otherwise memory may be leaked forever. Fixes: ef493bd9 ("netfilter: nfnetlink_queue: add security context information") Signed-off-by:
Liping Zhang <zlpnobody@gmail.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Jarno Rajahalme authored
The reference count held for skb needs to be released when the skb's nfct pointer is cleared regardless of if nf_ct_delete() is called or not. Failing to release the skb's reference cound led to deferred conntrack cleanup spinning forever within nf_conntrack_cleanup_net_list() when cleaning up a network namespace: kworker/u16:0-19025 [004] 45981067.173642: sched_switch: kworker/u16:0:19025 [120] R ==> rcu_preempt:7 [120] kworker/u16:0-19025 [004] 45981067.173651: kernel_stack: <stack trace> => ___preempt_schedule (ffffffffa001ed36) => _raw_spin_unlock_bh (ffffffffa0713290) => nf_ct_iterate_cleanup (ffffffffc00a4454) => nf_conntrack_cleanup_net_list (ffffffffc00a5e1e) => nf_conntrack_pernet_exit (ffffffffc00a63dd) => ops_exit_list.isra.1 (ffffffffa06075f3) => cleanup_net (ffffffffa0607df0) => process_one_work (ffffffffa0084c31) => worker_thread (ffffffffa008592b) => kthread (ffffffffa008bee2) => ret_from_fork (ffffffffa071b67c) Fixes: dd41d33f ("openvswitch: Add force commit.") Reported-by:
Yang Song <yangsong@vmware.com> Signed-off-by:
Jarno Rajahalme <jarno@ovn.org> Acked-by:
Joe Stringer <joe@ovn.org> Signed-off-by:
-
Arnd Bergmann authored
gcc-7 reports a warning that earlier versions did not have: drivers/net/ethernet/rocker/rocker_ofdpa.c: In function 'ofdpa_port_stp_update': arch/x86/include/asm/string_32.h:79:22: error: '*((void *)&prev_ctrls+4)' may be used uninitialized in this function [-Werror=maybe-uninitialized] *((short *)to + 2) = *((short *)from + 2); ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/rocker/rocker_ofdpa.c:2218:7: note: '*((void *)&prev_ctrls+4)' was declared here This is clearly a variation of the warning about 'prev_state' that was shut up using uninitialized_var(). We can slightly simplify the code and get rid of the warning by unconditionally saving the prev_state and prev_ctrls variables. The inlined memcpy is not particularly expensive here, as it just has to read five bytes from one or two cache lines. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Talat Batheesh authored
In NETDEV_CHANGEUPPER event the upper_info field is valid only when linking is true. Otherwise it should be ignored. Fixes: 7907f23a (net/mlx5: Implement RoCE LAG feature) Signed-off-by:
Talat Batheesh <talatb@mellanox.com> Reviewed-by:
Aviv Heller <avivh@mellanox.com> Reviewed-by:
Moni Shoua <monis@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Jonas Jensen authored
moxart_mac_start_xmit() doesn't care where tx_tail is, tx_head can catch and pass tx_tail, which is bad because moxart_tx_finished() isn't guaranteed to catch up on freeing resources from tx_tail. Add a check in moxart_mac_start_xmit() stopping the queue at the end of the circular buffer. Also add a check in moxart_tx_finished() waking the queue if the buffer has TX_WAKE_THRESHOLD or more free descriptors. While we're at it, move spin_lock_irq() to happen before our descriptor pointer is assigned in moxart_mac_start_xmit(). Addresses https://bugzilla.kernel.org/show_bug.cgi?id=99451Signed-off-by:
Jonas Jensen <jonas.jensen@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
gcc-7 points out that the AVMB1_ADDCARD ioctl results in an unintialized value ending up in the cardnr parameter: drivers/isdn/capi/kcapi.c: In function 'old_capi_manufacturer': drivers/isdn/capi/kcapi.c:1042:24: error: 'cdef.cardnr' may be used uninitialized in this function [-Werror=maybe-uninitialized] cparams.cardnr = cdef.cardnr; This has been broken since before the start of the git history, so either the value is not used for anything important, or the ioctl command doesn't get called in practice. Setting the cardnr to zero avoids the warning and makes sure we have consistent behavior. Signed-off-by:
-
Xin Long authored
David Laight noticed the support for MSG_MORE with datamsg->force_delay didn't really work as we expected, as the first msg with MSG_MORE set would always block the following chunks' dequeuing. This Patch is to rewrite it by saving the MSG_MORE flag into assoc as David Laight suggested. asoc->force_delay is used to save MSG_MORE flag before a msg is sent. All chunks in queue would not be sent out if asoc->force_delay is set by the msg with MSG_MORE flag, until a new msg without MSG_MORE flag clears asoc->force_delay. Note that this change would not affect the flush is generated by other triggers, like asoc->state != ESTABLISHED, queue size > pmtu etc. v1->v2: Not clear asoc->force_delay after sending the msg with MSG_MORE flag. Fixes: 4ea0c32f ("sctp: add support for MSG_MORE") Signed-off-by:
David Laight <david.laight@aculab.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
- 28 Mar, 2017 1 commit
-
-
Mark Rutland authored
Our chosen ic_dev may be anywhere in our list of ic_devs, and we may free it before attempting to close others. When we compare d->dev and ic_dev->dev, we're potentially dereferencing memory returned to the allocator. This causes KASAN to scream for each subsequent ic_dev we check. As there's a 1-1 mapping between ic_devs and netdevs, we can instead compare d and ic_dev directly, which implicitly handles the !ic_dev case, and avoids the use-after-free. The ic_dev pointer may be stale, but we will not dereference it. Original splat: [ 6.487446] ================================================================== [ 6.494693] BUG: KASAN: use-after-free in ic_close_devs+0xc4/0x154 at addr ffff800367efa708 [ 6.503013] Read of size 8 by task swapper/0/1 [ 6.507452] CPU: 5 PID: 1 Comm: swapper/0 Not tainted 4.11.0-rc3-00002-gda42158 #8 [ 6.514993] Hardware name: AppliedMicro Mustang/Mustang, BIOS 3.05.05-beta_rc Jan 27 2016 [ 6.523138] Call trace: [ 6.525590] [<ffff200008094778>] dump_backtrace+0x0/0x570 [ 6.530976] [<ffff200008094d08>] show_stack+0x20/0x30 [ 6.536017] [<ffff200008bee928>] dump_stack+0x120/0x188 [ 6.541231] [<ffff20000856d5e4>] kasan_object_err+0x24/0xa0 [ 6.546790] [<ffff20000856d924>] kasan_report_error+0x244/0x738 [ 6.552695] [<ffff20000856dfec>] __asan_report_load8_noabort+0x54/0x80 [ 6.559204] [<ffff20000aae86ac>] ic_close_devs+0xc4/0x154 [ 6.564590] [<ffff20000aaedbac>] ip_auto_config+0x2ed4/0x2f1c [ 6.570321] [<ffff200008084b04>] do_one_initcall+0xcc/0x370 [ 6.575882] [<ffff20000aa31de8>] kernel_init_freeable+0x5f8/0x6c4 [ 6.581959] [<ffff20000a16df00>] kernel_init+0x18/0x190 [ 6.587171] [<ffff200008084710>] ret_from_fork+0x10/0x40 [ 6.592468] Object at ffff800367efa700, in cache kmalloc-128 size: 128 [ 6.598969] Allocated: [ 6.601324] PID = 1 [ 6.603427] save_stack_trace_tsk+0x0/0x418 [ 6.607603] save_stack_trace+0x20/0x30 [ 6.611430] kasan_kmalloc+0xd8/0x188 [ 6.615087] ip_auto_config+0x8c4/0x2f1c [ 6.619002] do_one_initcall+0xcc/0x370 [ 6.622832] kernel_init_freeable+0x5f8/0x6c4 [ 6.627178] kernel_init+0x18/0x190 [ 6.630660] ret_from_fork+0x10/0x40 [ 6.634223] Freed: [ 6.636233] PID = 1 [ 6.638334] save_stack_trace_tsk+0x0/0x418 [ 6.642510] save_stack_trace+0x20/0x30 [ 6.646337] kasan_slab_free+0x88/0x178 [ 6.650167] kfree+0xb8/0x478 [ 6.653131] ic_close_devs+0x130/0x154 [ 6.656875] ip_auto_config+0x2ed4/0x2f1c [ 6.660875] do_one_initcall+0xcc/0x370 [ 6.664705] kernel_init_freeable+0x5f8/0x6c4 [ 6.669051] kernel_init+0x18/0x190 [ 6.672534] ret_from_fork+0x10/0x40 [ 6.676098] Memory state around the buggy address: [ 6.680880] ffff800367efa600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 6.688078] ffff800367efa680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 6.695276] >ffff800367efa700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 6.702469] ^ [ 6.705952] ffff800367efa780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 6.713149] ffff800367efa800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 6.720343] ================================================================== [ 6.727536] Disabling lock debugging due to kernel taint Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: David S. Miller <davem@davemloft.net> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: James Morris <jmorris@namei.org> Cc: Patrick McHardy <kaber@trash.net> Cc: netdev@vger.kernel.org Signed-off-by:
-
- 27 Mar, 2017 5 commits
-
-
Florian Fainelli authored
Andrew has been contributing a lot to PHYLIB over the past months and his feedback on patches is more than welcome. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Acked-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Gao Feng authored
In the commit 93557f53 ("netfilter: nf_conntrack: nf_conntrack snmp helper"), the snmp_helper is replaced by nf_nat_snmp_hook. So the snmp_helper is never registered. But it still tries to unregister the snmp_helper, it could cause the panic. Now remove the useless snmp_helper and the unregister call in the error handler. Fixes: 93557f53 ("netfilter: nf_conntrack: nf_conntrack snmp helper") Signed-off-by:
Gao Feng <fgao@ikuai8.com> Signed-off-by:
-
Liping Zhang authored
If one cpu is doing nf_ct_extend_unregister while another cpu is doing __nf_ct_ext_add_length, then we may hit BUG_ON(t == NULL). Moreover, there's no synchronize_rcu invocation after set nf_ct_ext_types[id] to NULL, so it's possible that we may access invalid pointer. But actually, most of the ct extends are built-in, so the problem listed above will not happen. However, there are two exceptions: NF_CT_EXT_NAT and NF_CT_EXT_SYNPROXY. For _EXT_NAT, the panic will not happen, since adding the nat extend and unregistering the nat extend are located in the same file(nf_nat_core.c), this means that after the nat module is removed, we cannot add the nat extend too. For _EXT_SYNPROXY, synproxy extend may be added by init_conntrack, while synproxy extend unregister will be done by synproxy_core_exit. So after nf_synproxy_core.ko is removed, we may still try to add the synproxy extend, then kernel panic may happen. I know it's very hard to reproduce this issue, but I can play a tricky game to make it happen very easily :) Step 1. Enable SYNPROXY for tcp dport 1234 at FORWARD hook: # iptables -I FORWARD -p tcp --dport 1234 -j SYNPROXY Step 2. Queue the syn packet to the userspace at raw table OUTPUT hook. Also note, in the userspace we only add a 20s' delay, then reinject the syn packet to the kernel: # iptables -t raw -I OUTPUT -p tcp --syn -j NFQUEUE --queue-num 1 Step 3. Using "nc 2.2.2.2 1234" to connect the server. Step 4. Now remove the nf_synproxy_core.ko quickly: # iptables -F FORWARD # rmmod ipt_SYNPROXY # rmmod nf_synproxy_core Step 5. After 20s' delay, the syn packet is reinjected to the kernel. Now you will see the panic like this: kernel BUG at net/netfilter/nf_conntrack_extend.c:91! Call Trace: ? __nf_ct_ext_add_length+0x53/0x3c0 [nf_conntrack] init_conntrack+0x12b/0x600 [nf_conntrack] nf_conntrack_in+0x4cc/0x580 [nf_conntrack] ipv4_conntrack_local+0x48/0x50 [nf_conntrack_ipv4] nf_reinject+0x104/0x270 nfqnl_recv_verdict+0x3e1/0x5f9 [nfnetlink_queue] ? nfqnl_recv_verdict+0x5/0x5f9 [nfnetlink_queue] ? nla_parse+0xa0/0x100 nfnetlink_rcv_msg+0x175/0x6a9 [nfnetlink] [...] One possible solution is to make NF_CT_EXT_SYNPROXY extend built-in, i.e. introduce nf_conntrack_synproxy.c and only do ct extend register and unregister in it, similar to nf_conntrack_timeout.c. But having such a obscure restriction of nf_ct_extend_unregister is not a good idea, so we should invoke synchronize_rcu after set nf_ct_ext_types to NULL, and check the NULL pointer when do __nf_ct_ext_add_length. Then it will be easier if we add new ct extend in the future. Last, we use kfree_rcu to free nf_ct_ext, so rcu_barrier() is unnecessary anymore, remove it too. Signed-off-by:Florian Westphal <fw@strlen.de> Signed-off-by:
-
Liping Zhang authored
The nf_ct_helper_hash table is protected by nf_ct_helper_mutex, while nfct_helper operation is protected by nfnl_lock(NFNL_SUBSYS_CTHELPER). So it's possible that one CPU is walking the nf_ct_helper_hash for cthelper add/get/del, another cpu is doing nf_conntrack_helpers_unregister at the same time. This is dangrous, and may cause use after free error. Note, delete operation will flush all cthelpers added via nfnetlink, so using rcu to do protect is not easy. Now introduce a dummy list to record all the cthelpers added via nfnetlink, then we can walk the dummy list instead of walking the nf_ct_helper_hash. Also, keep nfnl_cthelper_dump_table unchanged, it may be invoked without nfnl_lock(NFNL_SUBSYS_CTHELPER) held. Signed-off-by:
-
Liping Zhang authored
Otherwise, another CPU may access the invalid pointer. For example: CPU0 CPU1 - rcu_read_lock(); - pfunc = _hook_; _hook_ = NULL; - mod unload - - pfunc(); // invalid, panic - rcu_read_unlock(); So we must call synchronize_rcu() to wait the rcu reader to finish. Also note, in nf_nat_snmp_basic_fini, synchronize_rcu() will be invoked by later nf_conntrack_helper_unregister, but I'm inclined to add a explicit synchronize_rcu after set the nf_nat_snmp_hook to NULL. Depend on such obscure assumptions is not a good idea. Last, in nfnetlink_cttimeout, we use kfree_rcu to free the time object, so in cttimeout_exit, invoking rcu_barrier() is not necessary at all, remove it too. Signed-off-by:
-
- 26 Mar, 2017 3 commits
-
-
Alexey Khoroshilov authored
vlsi_alloc_ring() checks for DMA mapping errors by comparing returned address with zero, while pci_dma_mapping_error() should be used. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
Arnd Bergmann authored
hns_dsaf_set_mac_key() calls dsaf_set_field() on an uninitialized field, which will then change only a few of its bits, causing a warning with the latest gcc: hisilicon/hns/hns_dsaf_main.c: In function 'hns_dsaf_set_mac_uc_entry': hisilicon/hns/hns_dsaf_reg.h:1046:12: error: 'mac_key.low.bits.port_vlan' may be used uninitialized in this function [-Werror=maybe-uninitialized] (origin) &= (~(mask)); \ ^~ hisilicon/hns/hns_dsaf_main.c: In function 'hns_dsaf_set_mac_mc_entry': hisilicon/hns/hns_dsaf_reg.h:1046:12: error: 'mac_key.low.bits.port_vlan' may be used uninitialized in this function [-Werror=maybe-uninitialized] hisilicon/hns/hns_dsaf_main.c: In function 'hns_dsaf_add_mac_mc_port': hisilicon/hns/hns_dsaf_reg.h:1046:12: error: 'mac_key.low.bits.port_vlan' may be used uninitialized in this function [-Werror=maybe-uninitialized] hisilicon/hns/hns_dsaf_main.c: In function 'hns_dsaf_del_mac_entry': hisilicon/hns/hns_dsaf_reg.h:1046:12: error: 'mac_key.low.bits.port_vlan' may be used uninitialized in this function [-Werror=maybe-uninitialized] hisilicon/hns/hns_dsaf_main.c: In function 'hns_dsaf_rm_mac_addr': hisilicon/hns/hns_dsaf_reg.h:1046:12: error: 'mac_key.low.bits.port_vlan' may be used uninitialized in this function [-Werror=maybe-uninitialized] hisilicon/hns/hns_dsaf_main.c: In function 'hns_dsaf_del_mac_mc_port': hisilicon/hns/hns_dsaf_reg.h:1046:12: error: 'mac_key.low.bits.port_vlan' may be used uninitialized in this function [-Werror=maybe-uninitialized] hisilicon/hns/hns_dsaf_main.c: In function 'hns_dsaf_get_mac_uc_entry': hisilicon/hns/hns_dsaf_reg.h:1046:12: error: 'mac_key.low.bits.port_vlan' may be used uninitialized in this function [-Werror=maybe-uninitialized] hisilicon/hns/hns_dsaf_main.c: In function 'hns_dsaf_get_mac_mc_entry': hisilicon/hns/hns_dsaf_reg.h:1046:12: error: 'mac_key.low.bits.port_vlan' may be used uninitialized in this function [-Werror=maybe-uninitialized] The code is actually correct since we always set all 16 bits of the port_vlan field, but gcc correctly points out that the first access does contain uninitialized data. This initializes the field to zero first before setting the individual bits. Fixes: 5483bfcb ("net: hns: modify tcam table and set mac key") Signed-off-by: -
Arnd Bergmann authored
When dev_dbg() is enabled, we print uninitialized data, as gcc-7.0.1 now points out: ethernet/hisilicon/hns/hns_dsaf_main.c: In function 'hns_dsaf_set_promisc_tcam': ethernet/hisilicon/hns/hns_dsaf_main.c:2947:75: error: 'tbl_tcam_data.low.val' may be used uninitialized in this function [-Werror=maybe-uninitialized] ethernet/hisilicon/hns/hns_dsaf_main.c:2947:75: error: 'tbl_tcam_data.high.val' may be used uninitialized in this function [-Werror=maybe-uninitialized] We also pass the data into hns_dsaf_tcam_mc_cfg(), which might later use it (not sure about that), so it seems safer to just always initialize the tbl_tcam_data structure. Fixes: 1f5fa2dd ("net: hns: fix for promisc mode in HNS driver") Signed-off-by:
-
- 25 Mar, 2017 4 commits
-
-
Alexei Starovoitov authored
llvm can optimize the 'if (ptr > data_end)' checks to be in the order slightly different than the original C code which will confuse verifier. Like: if (ptr + 16 > data_end) return TC_ACT_SHOT; // may be followed by if (ptr + 14 > data_end) return TC_ACT_SHOT; while llvm can see that 'ptr' is valid for all 16 bytes, the verifier could not. Fix verifier logic to account for such case and add a test. Reported-by:
Huapeng Zhou <hzhou@fb.com> Fixes: 969bf05e ("bpf: direct packet access") Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
-
Eric Dumazet authored
We got a report of yet another bug in ping http://www.openwall.com/lists/oss-security/2017/03/24/6 ->disconnect() is not called with socket lock held. Fix this by acquiring ping rwlock earlier. Thanks to Daniel, Alexander and Andrey for letting us know this problem. Fixes: c319b4d7 ("net: ipv4: add IPPROTO_ICMP socket kind") Signed-off-by:
Daniel Jiang <danieljiang0415@gmail.com> Reported-by:
Solar Designer <solar@openwall.com> Reported-by:
-
Alexander Duyck authored
When testing the epoll w/ busy poll code I found that I could get into a state where the i40e driver had q_vectors w/ active NAPI that had no rings. This was resulting in a divide by zero error. To correct it I am updating the driver code so that we only support NAPI on q_vectors that have 1 or more rings allocated to them. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Florian Westphal authored
Unfortunately too many devices (not under our control) use tcp_tw_recycle=1, which depends on timestamps being identical of the same saddr. Although tcp_tw_recycle got removed in net-next we can't make such end hosts disappear so downgrade to per-host timestamp offsets. Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Reported-by:
Yvan Vanrossomme <yvan@vanrossomme.net> Fixes: 95a22cae ("tcp: randomize tcp timestamp offsets for each connection") Signed-off-by:
-
- 24 Mar, 2017 5 commits
-
-
Alexander Duyck authored
This change basically codifies what I think was already the limitations on the busy_poll and busy_read sysctl interfaces. We weren't checking the lower bounds and as such could input negative values. The behavior when that was used was dependent on the architecture. In order to prevent any issues with that I am just disabling support for values less than 0 since this way we don't have to worry about any odd behaviors. By limiting the sysctl values this way it also makes it consistent with how we handle the SO_BUSY_POLL socket option since the value appears to be reported as a signed integer value and negative values are rejected. Signed-off-by:
-
Jeff Kirsher authored
This reverts commit 7e54d9d0. After additional regression testing, several users are experiencing kernel panics during shutdown on e1000e devices. Reverting this change resolves the issue. Signed-off-by:
-
WANG Cong authored
There is no reason to continue after a copy_from_user() failure. Fixes: ab7ac4eb ("kcm: Kernel Connection Multiplexor module") Cc: Tom Herbert <tom@herbertland.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
The latest gcc-7 snapshot warns about bfa_ioc_send_enable/bfa_ioc_send_disable writing undefined values into the hardware registers: drivers/net/ethernet/brocade/bna/bfa_ioc.c: In function 'bfa_iocpf_sm_disabling_entry': arch/arm/include/asm/io.h:109:22: error: '*((void *)&disable_req+4)' is used uninitialized in this function [-Werror=uninitialized] arch/arm/include/asm/io.h:109:22: error: '*((void *)&disable_req+8)' is used uninitialized in this function [-Werror=uninitialized] The two functions look like they should do the same thing, but only one of them initializes the time stamp and clscode field. The fact that we only get a warning for one of the two functions seems to be arbitrary, based on the inlining decisions in the compiler. To address this, I'm making both functions do the same thing: - set the clscode from the ioc structure in both - set the time stamp from ktime_get_real_seconds (which also avoids the signed-integer overflow in 2038 and extends the well-defined behavior until 2106). - zero-fill the reserved field Fixes: 8b230ed8 ("bna: Brocade 10Gb Ethernet device driver") Signed-off-by:
-
David S. Miller authored
Ursula Braun says: ==================== s390/qeth patches for net here are 2 s390/qeth patches built for net fixing a problem with AF_IUCV traffic through HiperSockets. And we come up with an update for the MAINTAINERS file to establish Julian as Co-Maintainer for drivers/s390/net and net/iucv. ==================== Signed-off-by:
-
