- 30 Oct, 2012 37 commits
-
-
Michal Hocko authored
commit 7386cdbf upstream. Git commit 09a1d34f "nohz: Make idle/iowait counter update conditional" introduced a bug in regard to cpu hotplug. The effect is that the number of idle ticks in the cpu summary line in /proc/stat is still counting ticks for offline cpus. Reproduction is easy, just start a workload that keeps all cpus busy, switch off one or more cpus and then watch the idle field in top. On a dual-core with one cpu 100% busy and one offline cpu you will get something like this: %Cpu(s): 48.7 us, 1.3 sy, 0.0 ni, 50.0 id, 0.0 wa, 0.0 hi, 0.0 si, %0.0 st The problem is that an offline cpu still has ts->idle_active == 1. To fix this we should make sure that the cpu is online when calling get_cpu_idle_time_us and get_cpu_iowait_time_us. [Srivatsa: Rebased to current mainline] Reported-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
Michal Hocko <mhocko@suse.cz> Reviewed-by:
Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> [bwh: Backported to 3.2: adjust context] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Takashi Iwai authored
commit c5e0b6db upstream. The proper destructor should be called at the error path. Signed-off-by:
Takashi Iwai <tiwai@suse.de> [bwh: Backported to 3.2: drop the change to nonexistent patch_cs4213()] Signed-off-by:
-
Dmitry Monakhov authored
commit dee1f973 upstream. We assumed that at the time we call ext4_convert_unwritten_extents_endio() extent in question is fully inside [map.m_lblk, map->m_len] because it was already split during submission. But this may not be true due to a race between writeback vs fallocate. If extent in question is larger than requested we will split it again. Special precautions should being done if zeroout required because [map.m_lblk, map->m_len] already contains valid data. Signed-off-by:
Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Hugh Dickins authored
commit 35c2a7f4 upstream. Fuzzing with trinity oopsed on the 1st instruction of shmem_fh_to_dentry(), u64 inum = fid->raw[2]; which is unhelpfully reported as at the end of shmem_alloc_inode(): BUG: unable to handle kernel paging request at ffff880061cd3000 IP: [<ffffffff812190d0>] shmem_alloc_inode+0x40/0x40 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC Call Trace: [<ffffffff81488649>] ? exportfs_decode_fh+0x79/0x2d0 [<ffffffff812d77c3>] do_handle_open+0x163/0x2c0 [<ffffffff812d792c>] sys_open_by_handle_at+0xc/0x10 [<ffffffff83a5f3f8>] tracesys+0xe1/0xe6 Right, tmpfs is being stupid to access fid->raw[2] before validating that fh_len includes it: the buffer kmalloc'ed by do_sys_name_to_handle() may fall at the end of a page, and the next page not be present. But some other filesystems (ceph, gfs2, isofs, reiserfs, xfs) are being careless about fh_len too, in fh_to_dentry() and/or fh_to_parent(), and could oops in the same way: add the missing fh_len checks to those. Reported-by:
Sasha Levin <levinsasha928@gmail.com> Signed-off-by:
Hugh Dickins <hughd@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Sage Weil <sage@inktank.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Alexander Holler authored
commit b8c4321f upstream. Line 0 and 1 were both written to line 0 (on the display) and all subsequent lines had an offset of -1. The result was that the last line on the display was never overwritten by writes to /dev/fbN. Signed-off-by:
Alexander Holler <holler@ahsoftware.de> Acked-by:
Bernie Thompson <bernie@plugable.com> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by:
-
Dan Carpenter authored
commit 5b3900cd upstream. We fixed a bunch of integer overflows in timekeeping code during the 3.6 cycle. I did an audit based on that and found this potential overflow. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
John Stultz <johnstul@us.ibm.com> Link: http://lkml.kernel.org/r/20121009071823.GA19159@elgon.mountainSigned-off-by:
-
Hildner, Christian authored
commit 26cff4e2 upstream. Adding two (or more) timers with large values for "expires" (they have to reside within tv5 in the same list) leads to endless looping between cascade() and internal_add_timer() in case CONFIG_BASE_SMALL is one and jiffies are crossing the value 1 << 18. The bug was introduced between 2.6.11 and 2.6.12 (and survived for quite some time). This patch ensures that when cascade() is called timers within tv5 are not added endlessly to their own list again, instead they are added to the next lower tv level tv4 (as expected). Signed-off-by:
Christian Hildner <christian.hildner@siemens.com> Reviewed-by:
Jan Kiszka <jan.kiszka@siemens.com> Link: http://lkml.kernel.org/r/98673C87CB31274881CFFE0B65ECC87B0F5FC1963E@DEFTHW99EA4MSX.ww902.siemens.netSigned-off-by:
-
K. Y. Srinivasan authored
commit 5c1b10ab upstream. Properly account for I/O in transit before returning from the RESET call. In the absense of this patch, we could have a situation where the host may respond to a command that was issued prior to the issuance of the RESET command at some arbitrary time after responding to the RESET command. Currently, the host does not do anything with the RESET command. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com> [bwh: Backported to 3.2: adjust filename, context] Signed-off-by:
-
Lukas Czerner authored
commit bc977749 upstream. Currently it is possible to unmap one more block than user requested to due to the off-by-one error in unmap_region(). This is probably due to the fact that the end variable despite its name actually points to the last block to unmap + 1. However in the condition it is handled as the last block of the region to unmap. The bug was not previously spotted probably due to the fact that the region was not zeroed, which has changed with commit be1dd78d. With that commit we were able to corrupt the ext4 file system on 256M scsi_debug device with LBPRZ enabled using fstrim. Since the 'end' semantic is the same in several functions there this commit just fixes the condition to use the 'end' variable correctly in that context. Reported-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Acked-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
-
Russell King authored
commit 846a1368 upstream. Michael Olbrich reported that his test program fails when built with -O2 -mcpu=cortex-a8 -mfpu=neon, and a kernel which supports v6 and v7 CPUs: volatile int x = 2; volatile int64_t y = 2; int main() { volatile int a = 0; volatile int64_t b = 0; while (1) { a = (a + x) % (1 << 30); b = (b + y) % (1 << 30); assert(a == b); } } and two instances are run. When built for just v7 CPUs, this program works fine. It uses the "vadd.i64 d19, d18, d16" VFP instruction. It appears that we do not save the high-16 double VFP registers across context switches when the kernel is built for v6 CPUs. Fix that. Tested-By:
Michael Olbrich <m.olbrich@pengutronix.de> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Feng Tang authored
commit 67bfa9b6 upstream. By enlarging the GPE storm threshold back to 20, that laptop's EC works fine with interrupt mode instead of polling mode. https://bugzilla.kernel.org/show_bug.cgi?id=45151Reported-and-Tested-by:
Francesco <trentini@dei.unipd.it> Signed-off-by:
Feng Tang <feng.tang@intel.com> Signed-off-by:
Len Brown <len.brown@intel.com> Signed-off-by:
-
Feng Tang authored
commit a520d52e upstream. The Linux EC driver includes a mechanism to detect GPE storms, and switch from interrupt-mode to polling mode. However, polling mode sometimes doesn't work, so the workaround is problematic. Also, different systems seem to need the threshold for detecting the GPE storm at different levels. ACPI_EC_STORM_THRESHOLD was initially 20 when it's created, and was changed to 8 in 2.6.28 commit 06cf7d3c "ACPI: EC: lower interrupt storm threshold" to fix kernel bug 11892 by forcing the laptop in that bug to work in polling mode. However in bug 45151, it works fine in interrupt mode if we lift the threshold back to 20. This patch makes the threshold a module parameter so that user has a flexible option to debug/workaround this issue. The default is unchanged. This is also a preparation patch to fix specific systems: https://bugzilla.kernel.org/show_bug.cgi?id=45151Signed-off-by:
-
Matthew Garrett authored
commit c99af375 upstream. Cloudlinux have a product called lve that includes a kernel module. This was previously GPLed but is now under a proprietary license, but the module continues to declare MODULE_LICENSE("GPL") and makes use of some EXPORT_SYMBOL_GPL symbols. Forcibly taint it in order to avoid this. Signed-off-by:
Matthew Garrett <mjg59@srcf.ucam.org> Cc: Alex Lyashkov <umka@cloudlinux.com> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Daniel Drake authored
commit 012a1211 upstream. As detailed in the thread titled "viafb PLL/clock tweaking causes XO-1.5 instability," enabling or disabling the IGA1/IGA2 clocks causes occasional stability problems during suspend/resume cycles on this platform. This is rather odd, as the documentation suggests that clocks have two states (on/off) and the default (stable) configuration is configured to enable the clock only when it is needed. However, explicitly enabling *or* disabling the clock triggers this system instability, suggesting that there is a 3rd state at play here. Leaving the clock enable/disable registers alone solves this problem. This fixes spurious reboots during suspend/resume behaviour introduced by commit b692a63a. Signed-off-by:
Daniel Drake <dsd@laptop.org> Signed-off-by:
-
J. Bruce Fields authored
commit cf9182e9 upstream. Processes that open and close multiple files may end up setting this oo_last_closed_stid without freeing what was previously pointed to. This can result in a major leak, visible for example by watching the nfsd4_stateids line of /proc/slabinfo. Reported-by:
Cyril B. <cbay@excellency.fr> Tested-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Ian Abbott authored
commit aaeb61a9 upstream. `pc236_detach()` is called by the comedi core if it attempted to attach a device and failed. `pc236_detach()` calls `pc236_intr_disable()` if the comedi device private data pointer (`devpriv`) is non-null. This test is insufficient as `pc236_intr_disable()` accesses hardware registers and the attach routine may have failed before it has saved their I/O base addresses. Fix it by checking `dev->iobase` is non-zero before calling `pc236_intr_disable()` as that means the I/O base addresses have been saved and the hardware registers can be accessed. It also implies the comedi device private data pointer is valid, so there is no need to check it. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> [Ian Abbott: This patch is for the stable 3.0 kernel.] Signed-off-by:
-
Alexey Kuznetsov authored
[ Upstream commit 4c675258 ] After commit e2446eaa ("tcp_v4_send_reset: binding oif to iif in no sock case").. tcp resets are always lost, when routing is asymmetric. Yes, backing out that patch will result in misrouting of resets for dead connections which used interface binding when were alive, but we actually cannot do anything here. What's died that's died and correct handling normal unbound connections is obviously a priority. Comment to comment: > This has few benefits: > 1. tcp_v6_send_reset already did that. It was done to route resets for IPv6 link local addresses. It was a mistake to do so for global addresses. The patch fixes this as well. Actually, the problem appears to be even more serious than guaranteed loss of resets. As reported by Sergey Soloviev <sol@eqv.ru>, those misrouted resets create a lot of arp traffic and huge amount of unresolved arp entires putting down to knees NAT firewalls which use asymmetric routing. Signed-off-by:
Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by:
-
jeff.liu authored
[ Upstream commit 5175a5e7 ] This is the revised patch for fixing rds-ping spinlock recursion according to Venkat's suggestions. RDS ping/pong over TCP feature has been broken for years(2.6.39 to 3.6.0) since we have to set TCP cork and call kernel_sendmsg() between ping/pong which both need to lock "struct sock *sk". However, this lock has already been hold before rds_tcp_data_ready() callback is triggerred. As a result, we always facing spinlock resursion which would resulting in system panic. Given that RDS ping is only used to test the connectivity and not for serious performance measurements, we can queue the pong transmit to rds_wq as a delayed response. Reported-by:
Jie Liu <jeff.liu@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Florian Zumbiehl authored
[ Upstream commit 48cc32d3 ] 6a32e4f9 made the vlan code skip marking vlan-tagged frames for not locally configured vlans as PACKET_OTHERHOST if there was an rx_handler, as the rx_handler could cause the frame to be received on a different (virtual) vlan-capable interface where that vlan might be configured. As rx_handlers do not necessarily return RX_HANDLER_ANOTHER, this could cause frames for unknown vlans to be delivered to the protocol stack as if they had been received untagged. For example, if an ipv6 router advertisement that's tagged for a locally not configured vlan is received on an interface with macvlan interfaces attached, macvlan's rx_handler returns RX_HANDLER_PASS after delivering the frame to the macvlan interfaces, which caused it to be passed to the protocol stack, leading to ipv6 addresses for the announced prefix being configured even though those are completely unusable on the underlying interface. The fix moves marking as PACKET_OTHERHOST after the rx_handler so the rx_handler, if there is one, sees the frame unchanged, but afterwards, before the frame is delivered to the protocol stack, it gets marked whether there is an rx_handler or not. Signed-off-by:
Florian Zumbiehl <florz@florz.de> Signed-off-by:
-
Graham Gower authored
[ Upstream commit a2af139f ] Marvell 88E8001 on an ASUS P5NSLI motherboard is unable to send/receive packets on a system with >4gb ram unless a 32bit DMA mask is used. This issue has been around for years and a fix was sent 3.5 years ago, but there was some debate as to whether it should instead be fixed as a PCI quirk. http://www.spinics.net/lists/netdev/msg88670.html However, 18 months later a similar workaround was introduced for another chipset exhibiting the same problem. http://www.spinics.net/lists/netdev/msg142287.htmlSigned-off-by:
Graham Gower <graham.gower@gmail.com> Signed-off-by:
Jan Ceuleers <jan.ceuleers@computer.org> Acked-by:
Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
-
ramesh.nagappa@gmail.com authored
[ Upstream commit e1f16503 ] The retry loop in neigh_resolve_output() and neigh_connected_output() call dev_hard_header() with out reseting the skb to network_header. This causes the retry to fail with skb_under_panic. The fix is to reset the network_header within the retry loop. Signed-off-by:
Ramesh Nagappa <ramesh.nagappa@ericsson.com> Reviewed-by:
Shawn Lu <shawn.lu@ericsson.com> Reviewed-by:
Robert Coulson <robert.coulson@ericsson.com> Reviewed-by:
Billie Alsup <billie.alsup@ericsson.com> Signed-off-by:
-
Devin Heitmueller authored
commit a595c1ce upstream. We weren't checking whether the resource was in use before calling res_free(), so applications which called STREAMOFF on a v4l2 device that wasn't already streaming would cause a BUG() to be hit (MythTV). Reported-by:
Larry Finger <larry.finger@lwfinger.net> Reported-by:
Jay Harbeston <jharbestonus@gmail.com> Signed-off-by:
Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by:
-
David S. Miller authored
[ Upstream commit 2856cc2e ] On a 2-node machine with 256GB of ram we get 512 lines of console output, which is just too much. This mimicks Yinghai Lu's x86 commit c2b91e2e (x86_64/mm: check and print vmemmap allocation continuous) except that we aren't ever going to get contiguous block pointers in between calls so just print when the virtual address or node changes. This decreases the output by an order of 16. Also demote this to KERN_DEBUG. Signed-off-by:
-
Jiri Kosina authored
[ Upstream commit a27032ee ] There are multiple errors in how sys_sparc64_personality() handles personality flags stored in top three bytes. - directly comparing current->personality against PER_LINUX32 doesn't work in cases when any of the personality flags stored in the top three bytes are used. - directly forcefully setting personality to PER_LINUX32 or PER_LINUX discards any flags stored in the top three bytes Fix the first one by properly using personality() macro to compare only PER_MASK bytes. Fix the second one by setting only the bits that should be set, instead of overwriting the whole value. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
David S. Miller authored
[ Upstream commit e793d8c6 ] There was a serious disconnect in the logic happening in sparc_pmu_disable_event() vs. sparc_pmu_enable_event(). Event disable is implemented by programming a NOP event into the PCR. However, event enable was not reversing this operation. Instead, it was setting the User/Priv/Hypervisor trace enable bits. That's not sparc_pmu_enable_event()'s job, that's what sparc_pmu_enable() and sparc_pmu_disable() do . The intent of sparc_pmu_enable_event() is clear, since it first clear out the event type encoding field. So fix this by OR'ing in the event encoding rather than the trace enable bits. Signed-off-by:
-
David S. Miller authored
[ Upstream commit 08280e6c ] If the MM is not active, only report the top-level PC. Do not try to access the address space. Signed-off-by:
-
Al Viro authored
[ Upstream commit 55c2770e ] we want syscall_trace_leave() called on exit from any syscall; skipping its call in case we'd done force_successful_syscall_return() is broken... Signed-off-by:
-
Sjoerd Simons authored
commit 9756fe38 upstream. This box claims to have an LVDS interface but doesn't actually have one. Signed-off-by:
Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Daniel Vetter authored
commit c07496fa upstream. ... we will botch up the bit17 swizzling. Furthermore tiled pwrite is a (now) unused slowpath, so no one really cares. This fixes the last swizzling issues I have with i-g-t on my bit17 swizzling i915G. No regression, it's been broken since the dawn of gem, but it's nice for regression tracking when really _all_ i-g-t tests work. Actually this is not true, Chris Wilson noticed while reviewing this patch that the commit commit d9e86c0e Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Nov 10 16:40:20 2010 +0000 drm/i915: Pipelined fencing [infrastructure] contained a functional change that broke things. Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-Off-by:
-
Bryan Schumaker authored
commit 84e28a30 upstream. f39c1bfb (SUNRPC: Fix a UDP transport regression) introduced the "alloc_slot" function for xprt operations, but never created one for the backchannel operations. This patch fixes a null pointer dereference when mounting NFS over v4.1. Call Trace: [<ffffffffa0207957>] ? xprt_reserve+0x47/0x50 [sunrpc] [<ffffffffa02023a4>] call_reserve+0x34/0x60 [sunrpc] [<ffffffffa020e280>] __rpc_execute+0x90/0x400 [sunrpc] [<ffffffffa020e61a>] rpc_async_schedule+0x2a/0x40 [sunrpc] [<ffffffff81073589>] process_one_work+0x139/0x500 [<ffffffff81070e70>] ? alloc_worker+0x70/0x70 [<ffffffffa020e5f0>] ? __rpc_execute+0x400/0x400 [sunrpc] [<ffffffff81073d1e>] worker_thread+0x15e/0x460 [<ffffffff8145c839>] ? preempt_schedule+0x49/0x70 [<ffffffff81073bc0>] ? rescuer_thread+0x230/0x230 [<ffffffff81079603>] kthread+0x93/0xa0 [<ffffffff81465d04>] kernel_thread_helper+0x4/0x10 [<ffffffff81079570>] ? kthread_freezable_should_stop+0x70/0x70 [<ffffffff81465d00>] ? gs_change+0x13/0x13 Signed-off-by:
Bryan Schumaker <bjschuma@netapp.com> Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Jiri Pirko authored
commit 52f5509f upstream. This patch fixes a regression introduced by commit "e1000: do vlan cleanup (799d531)". Apparently some e1000 chips (not mine) are sensitive about the order of setting vlan filter and vlan stripping/inserting functionality. So this patch changes the order so it's the same as before vlan cleanup. Reported-by:
Ben Greear <greearb@candelatech.com> Signed-off-by:
Jiri Pirko <jpirko@redhat.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> [Jonathan Nieder: It doesn't apply cleanly to kernels before v3.3-rc1~182^2~581 (net: introduce and use netdev_features_t for device features sets) but a backport is straightforward.] Signed-off-by:
Jonathan Nieder <jrnieder@gmail.com> Tested-by:
Andrey Jr. Melnikov <temnota@kmv.ru> Signed-off-by:
-
David Henningsson authored
commit 83b0c6ba upstream. Make sure we don't dereference the "quirk" pointer when it is null. Reported-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
-
Brian Norris authored
commit bf7a01bf upstream. The NAND_CHIPOPTIONS_MSK has limited utility and is causing real bugs. It silently masks off at least one flag that might be set by the driver (NAND_NO_SUBPAGE_WRITE). This breaks the GPMI NAND driver and possibly others. Really, as long as driver writers exercise a small amount of care with NAND_* options, this mask is not necessary at all; it was only here to prevent certain options from accidentally being set by the driver. But the original thought turns out to be a bad idea occasionally. Thus, kill it. Note, this patch fixes some major gpmi-nand breakage. Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Tested-by:
Huang Shijie <shijie8@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> [Brian Norris: This is a backport for v3.2 stable.] Signed-off-by:
-
Jan Kara authored
commit 09e05d48 upstream. ext3 users of data=journal mode with blocksize < pagesize were occasionally hitting assertion failure in journal_commit_transaction() checking whether the transaction has at least as many credits reserved as buffers attached. The core of the problem is that when a file gets truncated, buffers that still need checkpointing or that are attached to the committing transaction are left with buffer_mapped set. When this happens to buffers beyond i_size attached to a page stradding i_size, subsequent write extending the file will see these buffers and as they are mapped (but underlying blocks were freed) things go awry from here. The assertion failure just coincidentally (and in this case luckily as we would start corrupting filesystem) triggers due to journal_head not being properly cleaned up as well. Under some rare circumstances this bug could even hit data=ordered mode users. There the assertion won't trigger and we would end up corrupting the filesystem. We fix the problem by unmapping buffers if possible (in lots of cases we just need a buffer attached to a transaction as a place holder but it must not be written out anyway). And in one case, we just have to bite the bullet and wait for transaction commit to finish. Reviewed-by:
Josef Bacik <jbacik@fusionio.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Ben Hutchings authored
commit 3be324a9 upstream. These are the hunks that I dropped when backporting for 3.2.24, which are applicable now that we also have commit f34cd9ca ('samsung-laptop: don't handle backlight if handled by acpi/video'). Signed-off-by:
-
Corentin Chary authored
commit f34cd9ca upstream. samsung-laptop is not at all related to ACPI, but since this interface is not documented at all, and the driver has to use it at load to understand how it works on the laptop, I think it's a good idea to disable it if a better solution is available. Signed-off-by:
Corentin Chary <corentincj@iksaif.net> Signed-off-by:
Matthew Garrett <mjg@redhat.com> [bwh: Backported to 3.2: - Adjust context, and change return to goto, since we do not have commit 5dea7a20 ('samsung-laptop: move code into init/exit functions') - Use static variable since we do not have commit a6df4894 ('samsung-laptop: put all local variables in a single structure')] Signed-off-by:
-
Jan Engelhardt authored
commit 5276e16b upstream. When using the xt_set.h header in userspace, one will get these gcc reports: ipset/ip_set.h:184:1: error: unknown type name "u16" In file included from libxt_SET.c:21:0: netfilter/xt_set.h:61:2: error: unknown type name "u32" netfilter/xt_set.h:62:2: error: unknown type name "u32" Signed-off-by:
Jan Engelhardt <jengelh@medozas.de> Signed-off-by:
Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
- 17 Oct, 2012 3 commits
-
-
Ben Hutchings authored
-
Daniel Vetter authored
commit 15a13bbd upstream. This fixes a resume regression introduced in commit 7dd49065 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Mar 21 10:48:18 2012 +0000 drm/i915: Mark untiled BLT commands as fenced on gen2/3 which fixed fencing tracking for untiled blt commands. A side effect of that patch was that now also untiled objects have a non-zero obj->last_fenced_seqno to track when a fence can be set up after a pipelined tiling change. Unfortunately this was only cleared by the fence setup and teardown code, resulting in tons of untiled but inactive objects with non-zero last_fenced_seqno. Now after resume we completely reset the seqno tracking, both on the driver side (by setting dev_priv->next_seqno = 1) and on the hw side (by allocating a new hws page, which contains the seqnos). Hilarity and indefinite waits ensued from the stale seqnos in obj->last_fenced_seqno from before the suspend. The fix is to properly clear the fencing tracking state like we already do for the normal gpu rendering while moving objects off the active list. Reported-and-tested-by:
"Rafael J. Wysocki" <rjw@sisk.pl> Cc: Jiri Slaby <jslaby@suse.cz> Reviewed-by:
-
Chris Wilson authored
commit 7dd49065 upstream. The BLT commands on gen2/3 utilize the fence registers and so we cannot modify any fences for the object whilst those commands are in flight. Currently we marked tiled commands as occupying a fence, but forgot to restrict the untiled commands from preventing a fence being assigned before they were completed. One side-effect is that we ten have to double check that a fence was allocated for a fenced buffer during move-to-active. Reported-by:
Jiri Slaby <jirislaby@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=43427 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=47990Reviewed-by:
-
