- 03 Sep, 2020 40 commits
-
-
Lukas Czerner authored
[ Upstream commit 24dc9864 ] Callers of __jbd2_journal_unfile_buffer() and __jbd2_journal_refile_buffer() assume that the b_transaction is set. In fact if it's not, we can end up with journal_head refcounting errors leading to crash much later that might be very hard to track down. Add asserts to make sure that is the case. We also make sure that b_next_transaction is NULL in __jbd2_journal_unfile_buffer() since the callers expect that as well and we should not get into that stage in this state anyway, leading to problems later on if we do. Tested with fstests. Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Reviewed-by:
Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20200617092549.6712-1-lczerner@redhat.comSigned-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Christophe JAILLET authored
[ Upstream commit 07c84341 ] If a memory allocation fails within a 'usb_ep_alloc_request()' call, the already allocated memory must be released. Fix a mix-up in the code and free the correct requests. Fixes: c52661d6 ("usb-gadget: Initial merge of target module for UASP + BOT") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
Wolfram Sang authored
[ Upstream commit 914a7b35 ] Currently, a NACK in slave mode is set/cleared when SCL is held low by the IP core right before the bit is about to be pushed out. This is too late for clearing and then a NACK from the previous byte is still used for the current one. Now, let's clear the NACK right after we detected the STOP condition following the NACK. Fixes: de20d185 ("i2c: rcar: add slave support") Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
Wolfram Sang <wsa@kernel.org> Signed-off-by:
-
Hou Pu authored
[ Upstream commit 2d62e6b0 ] REQ_FUA should be checked using rq->cmd_flags instead of req_op(). Fixes: deb78b41 ("nullb: emulate cache") Signed-off-by:
Hou Pu <houpu@bytedance.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Tianjia Zhang authored
[ Upstream commit f34448cd ] On an error exit path, a negative error code should be returned instead of a positive return value. Fixes: e399441d ("nvme-fabrics: Add host support for FC transport") Cc: James Smart <jsmart2021@gmail.com> Signed-off-by:
Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Reviewed-by:
Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
-
Rob Clark authored
[ Upstream commit f228af11 ] We need to set it to the most recent completed fence, not the most recent submitted. Otherwise we have races where we think we can retire submits that the GPU is not finished with, if the GPU doesn't manage to overwrite the seqno before we look at it. This can show up with hang recovery if one of the submits after the crashing submit also hangs after it is replayed. Fixes: f97decac ("drm/msm: Support multiple ringbuffers") Signed-off-by:
Rob Clark <robdclark@chromium.org> Reviewed-by:
Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by:
-
Sean Young authored
[ Upstream commit ea8912b7 ] usleep_range() may take longer than the max argument due to scheduling, especially under load. This is causing random errors in the transmitted IR. Remove the usleep_range() in favour of busy-looping with udelay(). Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by:
-
Zhi Chen authored
[ Upstream commit a1769bb6 ] This reverts commit 76d164f5. PCIe hung issue was observed on multiple platforms. The issue was reproduced when DUT was configured as AP and associated with 50+ STAs. For QCA9984/QCA9888, the DMA_BURST_SIZE register controls the AXI burst size of the RD/WR access to the HOST MEM. 0 - No split , RAW read/write transfer size from MAC is put out on bus as burst length 1 - Split at 256 byte boundary 2,3 - Reserved With PCIe protocol analyzer, we can see DMA Read crossing 4KB boundary when issue happened. It broke PCIe spec and caused PCIe stuck. So revert the default value from 0 to 1. Tested: IPQ8064 + QCA9984 with firmware 10.4-3.10-00047 QCS404 + QCA9984 with firmware 10.4-3.9.0.2--00044 Synaptics AS370 + QCA9888 with firmware 10.4-3.9.0.2--00040 Signed-off-by:
Zhi Chen <zhichen@codeaurora.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Andrey Konovalov authored
[ Upstream commit 2c547f9d ] When CONFIG_EFI is not enabled, we might get an undefined reference to efi_enter_virtual_mode() error, if this efi_enabled() call isn't inlined into start_kernel(). This happens in particular, if start_kernel() is annodated with __no_sanitize_address. Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Acked-by:
Ard Biesheuvel <ardb@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Elena Petrova <lenaptr@google.com> Cc: Marco Elver <elver@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Walter Wu <walter-zh.wu@mediatek.com> Link: http://lkml.kernel.org/r/6514652d3a32d3ed33d6eb5c91d0af63bf0d1a0c.1596544734.git.andreyknvl@google.comSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Changming Liu authored
[ Upstream commit 2b53a192 ] The char buffer buf, receives data directly from user space, so its content might be negative and its elements are left shifted to form an unsigned integer. Since left shifting a negative value is undefined behavior, thus change the char to u8 to elimintate this UB. Signed-off-by:
Changming Liu <charley.ashbringer@gmail.com> Link: https://lore.kernel.org/r/20200711043018.928-1-charley.ashbringer@gmail.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit b648a513 ] The kernel test robot pointed out a slightly different error message after recent commit 5456ffde ("powerpc/spufs: simplify spufs core dumping") to spufs for a configuration that never worked: powerpc64-linux-ld: arch/powerpc/platforms/cell/spufs/file.o: in function `.spufs_proxydma_info_dump': >> file.c:(.text+0x4c68): undefined reference to `.dump_emit' powerpc64-linux-ld: arch/powerpc/platforms/cell/spufs/file.o: in function `.spufs_dma_info_dump': file.c:(.text+0x4d70): undefined reference to `.dump_emit' powerpc64-linux-ld: arch/powerpc/platforms/cell/spufs/file.o: in function `.spufs_wbox_info_dump': file.c:(.text+0x4df4): undefined reference to `.dump_emit' Add a Kconfig dependency to prevent this from happening again. Reported-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Jeremy Kerr <jk@ozlabs.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200706132302.3885935-1-arnd@arndb.deSigned-off-by:
-
David Brazdil authored
[ Upstream commit b38b298a ] __hyp_call_panic_nvhe contains inline assembly which did not declare its dependency on the __hyp_panic_string symbol. The static-declared string has previously been kept alive because of a use in __hyp_call_panic_vhe. Fix this in preparation for separating the source files between VHE and nVHE when the two users land in two different compilation units. The static variable otherwise gets dropped when compiling the nVHE source file, causing an undefined symbol linker error later. Signed-off-by:
David Brazdil <dbrazdil@google.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200625131420.71444-2-dbrazdil@google.comSigned-off-by:
-
Jason Baron authored
[ Upstream commit 709ed1bc ] The Intel uncore driver may claim some of the pci ids from ie31200 which means that the ie31200 edac driver will not initialize them as part of pci_register_driver(). Let's add a fallback for this case to 'pci_get_device()' to get a reference on the device such that it can still be configured. This is similar in approach to other edac drivers. Signed-off-by:
Jason Baron <jbaron@akamai.com> Cc: Borislav Petkov <bp@suse.de> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: linux-edac <linux-edac@vger.kernel.org> Signed-off-by:
Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/r/1594923911-10885-1-git-send-email-jbaron@akamai.comSigned-off-by:
-
Javed Hasan authored
[ Upstream commit e95b4789 ] In fcoe_sysfs_fcf_del(), we first deleted the fcf from the list and then freed it if ctlr_dev was not NULL. This was causing a memory leak. Free the fcf even if ctlr_dev is NULL. Link: https://lore.kernel.org/r/20200729081824.30996-3-jhasan@marvell.comReviewed-by:
Girish Basrur <gbasrur@marvell.com> Reviewed-by:
Santosh Vernekar <svernekar@marvell.com> Reviewed-by:
Saurav Kashyap <skashyap@marvell.com> Reviewed-by:
Shyam Sundar <ssundar@marvell.com> Signed-off-by:
Javed Hasan <jhasan@marvell.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Xiubo Li authored
[ Upstream commit fa996773 ] Make sure the delayed work stopped before releasing the resources. cancel_delayed_work_sync() will only guarantee that the work finishes executing if the work is already in the ->worklist. That means after the cancel_delayed_work_sync() returns, it will leave the work requeued if it was rearmed at the end. That can lead to a use after free once the work struct is freed. Fix it by flushing the delayed work instead of trying to cancel it, and ensure that the work doesn't rearm if the mdsc is stopping. URL: https://tracker.ceph.com/issues/46293Signed-off-by:
Xiubo Li <xiubli@redhat.com> Reviewed-by:
Jeff Layton <jlayton@kernel.org> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Jing Xiangfeng authored
[ Upstream commit 68e12e5f ] If scsi_host_lookup() fails we will jump to put_host which may cause a panic. Jump to exit_set_fnode instead. Link: https://lore.kernel.org/r/20200615081226.183068-1-jingxiangfeng@huawei.comReviewed-by:
Mike Christie <michael.christie@oracle.com> Signed-off-by:
Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by:
-
Qu Wenruo authored
[ Upstream commit a7f8b1c2 ] The incoming qgroup reserved space timing will move the data reservation to ordered extent completely. However in btrfs_punch_hole_lock_range() will call btrfs_invalidate_page(), which will clear QGROUP_RESERVED bit for the range. In current stage it's OK, but if we're making ordered extents handle the reserved space, then btrfs_punch_hole_lock_range() can clear the QGROUP_RESERVED bit before we submit ordered extent, leading to qgroup reserved space leakage. So here change the timing to make reserve data space after btrfs_punch_hole_lock_range(). The new timing is fine for either current code or the new code. Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Chris Wilson authored
[ Upstream commit a7ef9b28 ] Though the number of lock-acquisitions is tracked as unsigned long, this is passed as the divisor to div_s64() which interprets it as a s32, giving nonsense values with more than 2 billion acquisitons. E.g. acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg ------------------------------------------------------------------------- 2350439395 0.07 353.38 649647067.36 0.-32 Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20200725185110.11588-1-chris@chris-wilson.co.ukSigned-off-by:
-
Aditya Pakki authored
[ Upstream commit 990a1162 ] nouveau_connector_detect() calls pm_runtime_get_sync and in turn increments the reference count. In case of failure, decrement the ref count before returning the error. Signed-off-by:
Aditya Pakki <pakki001@umn.edu> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Aditya Pakki authored
[ Upstream commit a2cdf395 ] nv50_disp_atomic_commit() calls calls pm_runtime_get_sync and in turn increments the reference count. In case of failure, decrement the ref count before returning the error. Signed-off-by:
-
Aditya Pakki authored
[ Upstream commit bfad51c7 ] nouveau_fbcon_open() calls calls pm_runtime_get_sync() that increments the reference count. In case of failure, decrement the ref count before returning the error. Signed-off-by:
-
Li Guifu authored
[ Upstream commit 99c787cf ] During umount, f2fs_put_super() unregisters procfs entries after f2fs_destroy_segment_manager(), it may cause use-after-free issue when umount races with procfs accessing, fix it by relocating f2fs_unregister_sysfs(). [Chao Yu: change commit title/message a bit] Signed-off-by:
Li Guifu <bluce.liguifu@huawei.com> Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Ikjoon Jang authored
[ Upstream commit 68f775dd ] Add HID_QUIRK_NOGET for Logitech GROUP device. Logitech GROUP is a compound with camera and audio. When the HID interface in an audio device is requested to get specific report id, all following control transfers are stalled and never be restored back. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=203419Signed-off-by:
Ikjoon Jang <ikjn@chromium.org> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Hans Verkuil authored
[ Upstream commit 6c42227c ] Fix this smatch warning: drivers/media/cec/core/cec-api.c:156 cec_adap_g_log_addrs() warn: check that 'log_addrs' doesn't leak information (struct has a hole after 'features') Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
Peng Fan authored
[ Upstream commit a859647b ] Close "fd" before the return of map_vdso() and close "out_file" in main(). Signed-off-by:
Peng Fan <fanpeng@loongson.cn> Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
-
Reto Schneider authored
[ Upstream commit 03128643 ] If usb_submit_urb fails the allocated urb should be unanchored and released. Signed-off-by:
Reto Schneider <code@reto-schneider.ch> Signed-off-by:
-
Yangbo Lu authored
[ Upstream commit 5656bb38 ] The timer fixed interval period pulse generator register is used to generate periodic pulses. The down count register loads the value programmed in the fixed period interval (FIPER). At every tick of the timer accumulator overflow, the counter decrements by the value of TMR_CTRL[TCLK_PERIOD]. It generates a pulse when the down counter value reaches zero. It reloads the down counter in the cycle following a pulse. To use the TMR_FIPER register to generate desired periodic pulses. The value should programmed is, desired_period - tclk_period Current tmr-fiper2 value is to generate 100us periodic pulses. (But the value should have been 99995, not 99990. The tclk_period is 5.) This patch is to generate 1 second periodic pulses with value 999999995 programmed which is more desired by user. Signed-off-by:
Yangbo Lu <yangbo.lu@nxp.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Qiushi Wu authored
[ Upstream commit 8a94644b ] kobject_init_and_add() takes a reference even when it fails. If it returns an error, kobject_put() must be called to clean up the memory associated with the object. When kobject_init_and_add() fails, call kobject_put() instead of kfree(). b8eb7183 ("net-sysfs: Fix reference count leak in rx|netdev_queue_add_kobject") fixed a similar problem. Link: https://lore.kernel.org/r/20200528021322.1984-1-wu000273@umn.eduSigned-off-by:
Qiushi Wu <wu000273@umn.edu> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Aditya Pakki authored
[ Upstream commit 78c2ce9b ] On calling pm_runtime_get_sync() the reference count of the device is incremented. In case of failure, decrement the reference count before returning the error. Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200614030528.128064-1-pakki001@umn.eduSigned-off-by:
-
Chao Yu authored
[ Upstream commit 9627a7b3 ] - don't panic kernel if f2fs_get_node_page() fails in f2fs_recover_inline_data() or f2fs_recover_inline_xattr(); - return error number of f2fs_truncate_blocks() to f2fs_recover_inline_data()'s caller; Signed-off-by:
-
Desnes A. Nunes do Rosario authored
[ Upstream commit 3337bf41 ] An extra count on ebb_state.stats.pmc_count[PMC_INDEX(pmc)] is being per- formed when count_pmc() is used to reset PMCs on a few selftests. This extra pmc_count can occasionally invalidate results, such as the ones from cycles_test shown hereafter. The ebb_check_count() failed with an above the upper limit error due to the extra value on ebb_state.stats.pmc_count. Furthermore, this extra count is also indicated by extra PMC1 trace_log on the output of the cycle test (as well as on pmc56_overflow_test): ========== ... [21]: counter = 8 [22]: register SPRN_MMCR0 = 0x0000000080000080 [23]: register SPRN_PMC1 = 0x0000000080000004 [24]: counter = 9 [25]: register SPRN_MMCR0 = 0x0000000080000080 [26]: register SPRN_PMC1 = 0x0000000080000004 [27]: counter = 10 [28]: register SPRN_MMCR0 = 0x0000000080000080 [29]: register SPRN_PMC1 = 0x0000000080000004 >> [30]: register SPRN_PMC1 = 0x000000004000051e PMC1 count (0x280000546) above upper limit 0x2800003e8 (+0x15e) [FAIL] Test FAILED on line 52 failure: cycles ========== Signed-off-by:
Desnes A. Nunes do Rosario <desnesn@linux.ibm.com> Tested-by:
Sachin Sant <sachinp@linux.vnet.ibm.com> Signed-off-by:
-
Dave Chinner authored
[ Upstream commit 96355d5a ] In tracking down a problem in this patchset, I discovered we are reclaiming dirty stale inodes. This wasn't discovered until inodes were always attached to the cluster buffer and then the rcu callback that freed inodes was assert failing because the inode still had an active pointer to the cluster buffer after it had been reclaimed. Debugging the issue indicated that this was a pre-existing issue resulting from the way the inodes are handled in xfs_inactive_ifree. When we free a cluster buffer from xfs_ifree_cluster, all the inodes in cache are marked XFS_ISTALE. Those that are clean have nothing else done to them and so eventually get cleaned up by background reclaim. i.e. it is assumed we'll never dirty/relog an inode marked XFS_ISTALE. On journal commit dirty stale inodes as are handled by both buffer and inode log items to run though xfs_istale_done() and removed from the AIL (buffer log item commit) or the log item will simply unpin it because the buffer log item will clean it. What happens to any specific inode is entirely dependent on which log item wins the commit race, but the result is the same - stale inodes are clean, not attached to the cluster buffer, and not in the AIL. Hence inode reclaim can just free these inodes without further care. However, if the stale inode is relogged, it gets dirtied again and relogged into the CIL. Most of the time this isn't an issue, because relogging simply changes the inode's location in the current checkpoint. Problems arise, however, when the CIL checkpoints between two transactions in the xfs_inactive_ifree() deferops processing. This results in the XFS_ISTALE inode being redirtied and inserted into the CIL without any of the other stale cluster buffer infrastructure being in place. Hence on journal commit, it simply gets unpinned, so it remains dirty in memory. Everything in inode writeback avoids XFS_ISTALE inodes so it can't be written back, and it is not tracked in the AIL so there's not even a trigger to attempt to clean the inode. Hence the inode just sits dirty in memory until inode reclaim comes along, sees that it is XFS_ISTALE, and goes to reclaim it. This reclaiming of a dirty inode caused use after free, list corruptions and other nasty issues later in this patchset. Hence this patch addresses a violation of the "never log XFS_ISTALE inodes" caused by the deferops processing rolling a transaction and relogging a stale inode in xfs_inactive_free. It also adds a bunch of asserts to catch this problem in debug kernels so that we don't reintroduce this problem in future. Reproducer for this issue was generic/558 on a v4 filesystem. Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
-
Dick Kennedy authored
[ Upstream commit 03dbfe06 ] When vports are deleted, it is observed that there is memory/kthread leakage as the vport isn't fully being released. There is a shost reference taken in scsi_add_host_dma that is not released during scsi_remove_host. It was noticed that other drivers resolve this by doing a scsi_host_put after calling scsi_remove_host. The vport_delete routine is taking two references one that corresponds to an access to the scsi_host in the vport_delete routine and another that is released after the adapter mailbox command completes that destroys the VPI that corresponds to the vport. Remove one of the references taken such that the second reference that is put will complete the missing scsi_add_host_dma reference and the shost will be terminated. Link: https://lore.kernel.org/r/20200630215001.70793-8-jsmart2021@gmail.comSigned-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
-
Navid Emamdoost authored
[ Upstream commit f79f9476 ] The call to pm_runtime_get_sync increments the counter even in case of failure, leading to incorrect ref count. In case of failure, decrement the ref count before returning. Signed-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Navid Emamdoost authored
[ Upstream commit e008fa6f ] in amdgpu_display_crtc_set_config, the call to pm_runtime_get_sync increments the counter even in case of failure, leading to incorrect ref count. In case of failure, decrement the ref count before returning. Signed-off-by:
-
Navid Emamdoost authored
[ Upstream commit 5509ac65 ] in amdgpu_drm_ioctl the call to pm_runtime_get_sync increments the counter even in case of failure, leading to incorrect ref count. In case of failure, decrement the ref count before returning. Signed-off-by:
-
Navid Emamdoost authored
[ Upstream commit 9ba8923c ] in amdgpu_driver_open_kms the call to pm_runtime_get_sync increments the counter even in case of failure, leading to incorrect ref count. In case of failure, decrement the ref count before returning. Signed-off-by:
-
Aditya Pakki authored
[ Upstream commit 6f2e8acd ] On calling pm_runtime_get_sync() the reference count of the device is incremented. In case of failure, decrement the reference count before returning the error. Signed-off-by:
-
Qiushi Wu authored
[ Upstream commit 20eca012 ] kobject_init_and_add() takes reference even when it fails. If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Signed-off-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Robin Murphy authored
[ Upstream commit d3e3d2be ] Unlike the other instances which represent a complete loss of consistency within the rcache mechanism itself, or a fundamental and obvious misconfiguration by an IOMMU driver, the BUG_ON() in iova_magazine_free_pfns() can be provoked at more or less any time in a "spooky action-at-a-distance" manner by any old device driver passing nonsense to dma_unmap_*() which then propagates through to queue_iova(). Not only is this well outside the IOVA layer's control, it's also nowhere near fatal enough to justify panicking anyway - all that really achieves is to make debugging the offending driver more difficult. Let's simply WARN and otherwise ignore bogus PFNs. Reported-by:
Prakash Gupta <guptap@codeaurora.org> Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Reviewed-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
