Pull rdma fixes from Jason Gunthorpe:
 "The last two weeks have been quiet here, just the usual smattering of
  long standing bug fixes.

  A collection of error case bug fixes:

   - Improper nesting of spinlock types in cm

   - Missing error codes and kfree()

   - Ensure dma_virt_ops users have the right kconfig symbols to work
     properly

   - Compilation failure of tools/testing"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  tools/testing/scatterlist: Fix test to compile and run
  IB/hfi1: Fix error return code in hfi1_init_dd()
  RMDA/sw: Don't allow drivers using dma_virt_ops on highmem configs
  RDMA/pvrdma: Fix missing kfree() in pvrdma_register_device()
  RDMA/cm: Make the local_id_table xarray non-irq

Pull powerpc fixes from Michael Ellerman:
 "Fixes for CVE-2020-4788.

  From Daniel's cover letter:

  IBM Power9 processors can speculatively operate on data in the L1
  cache before it has been completely validated, via a way-prediction
  mechanism. It is not possible for an attacker to determine the
  contents of impermissible memory using this method, since these
  systems implement a combination of hardware and software security
  measures to prevent scenarios where protected data could be leaked.

  However these measures don't address the scenario where an attacker
  induces the operating system to speculatively execute instructions
  using data that the attacker controls. This can be used for example to
  speculatively bypass "kernel user access prevention" techniques, as
  discovered by Anthony Steinhauser of Google's Safeside Project. This
  is not an attack by itself, but there is a possibility it could be
  used in conjunction with side-channels or other weaknesses in the
  privileged code to construct an attack.

  This issue can be mitigated by flushing the L1 cache between privilege
  boundaries of concern.

  This patch series flushes the L1 cache on kernel entry (patch 2) and
  after the kernel performs any user accesses (patch 3). It also adds a
  self-test and performs some related cleanups"

* tag 'powerpc-cve-2020-4788' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: rename pnv|pseries_setup_rfi_flush to _setup_security_mitigations
  selftests/powerpc: refactor entry and rfi_flush tests
  selftests/powerpc: entry flush test
  powerpc: Only include kup-radix.h for 64-bit Book3S
  powerpc/64s: flush L1D after user accesses
  powerpc/64s: flush L1D on kernel entry
  selftests/powerpc: rfi_flush: disable entry flush if present

Pull xtensa fixes from Max Filippov:

 - fix placement of cache alias remapping area

 - disable preemption around cache alias management calls

 - add missing __user annotation to strncpy_from_user argument

* tag 'xtensa-20201119' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: uaccess: Add missing __user to strncpy_from_user() prototype
  xtensa: disable preemption around cache alias management calls
  xtensa: fix TLBTEMP area placement

Pull ACPI fixes from Rafael Wysocki:
 "These fix recent regression in the APEI code and initialization issue
  in the ACPI fan driver.

  Specifics:

   - Make the APEI code avoid attempts to obtain logical addresses for
     registers located in the I/O address space to fix initialization
     issues (Aili Yao)

   - Fix sysfs attribute initialization in the ACPI fan driver (Guenter
     Roeck)"

* tag 'acpi-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI, APEI, Fix error return value in apei_map_generic_address()
  ACPI: fan: Initialize performance state sysfs attribute

Pull power management fixes from Rafael Wysocki:
 "These fix two issues in ARM cpufreq drivers and one cpuidle driver
  issue.

  Specifics:

   - Add missing RCU_NONIDLE() annotations to the Tegra cpuidle driver
     (Dmitry Osipenko)

   - Fix boot frequency computation in the tegra186 cpufreq driver (Jon
     Hunter)

   - Make the SCMI cpufreq driver register a dummy clock provider to
     avoid OPP addition failures (Sudeep Holla)"

* tag 'pm-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: scmi: Fix OPP addition failure with a dummy clock provider
  cpufreq: tegra186: Fix get frequency callback
  cpuidle: tegra: Annotate tegra_pm_set_cpu_in_lp2() with RCU_NONIDLE

Pull spi fixes from Mark Brown:
 "This is a relatively large set of fixes, the bulk of it being a series
  from Lukas Wunner which fixes confusion with the lifetime of driver
  data allocated along with the SPI controller structure that's been
  created as part of the conversion to devm APIs.

  The simplest fix, explained in detail in Lukas' commit message, is to
  move to a devm_ function for allocation of the controller and hence
  driver data in order to push the free of that after anything tries to
  reference the driver data in the remove path. This results in a
  relatively large diff due to the addition of a new function but isn't
  particularly complex.

  There's also a fix from Sven van Asbroeck which fixes yet more fallout
  from the conflicts between the various different places one can
  configure the polarity of GPIOs in modern systems.

  Otherwise everything is fairly small and driver specific"

* tag 'spi-fix-v5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: npcm-fiu: Don't leak SPI master in probe error path
  spi: dw: Set transfer handler before unmasking the IRQs
  spi: cadence-quadspi: Fix error return code in cqspi_probe
  spi: bcm2835aux: Restore err assignment in bcm2835aux_spi_probe
  spi: lpspi: Fix use-after-free on unbind
  spi: bcm-qspi: Fix use-after-free on unbind
  spi: bcm2835aux: Fix use-after-free on unbind
  spi: bcm2835: Fix use-after-free on unbind
  spi: Introduce device-managed SPI controller allocation
  spi: fsi: Fix transfer returning without finalizing message
  spi: fix client driver breakages when using GPIO descriptors

Merge tag 'regulator-fix-v5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "Mostly core fixes here, one set from Michał Mirosław which cleans up
  some issues introduced as part of the coupled regulators work, one
  memory leak during probe and two due to regulators which have an input
  supply name and regulator name which are identical, which is very
  unusual.

  There's also a fix for our handling of the similarly unusual case
  where we can't determine if a regulator is enabled during boot"

* tag 'regulator-fix-v5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: ti-abb: Fix array out of bound read access on the first transition
  regulator: workaround self-referent regulators
  regulator: avoid resolve_supply() infinite recursion
  regulator: fix memory leak with repeated set_machine_constraints()
  regulator: pfuze100: limit pfuze-support-disable-sw to pfuze{100,200}
  regulator: core: don't disable regulator if is_enabled return error.

Pull thermal fix from Daniel Lezcano:
 "Disable the CPU PM notifier for OMAP4430 for suspend in order to
  prevent wrong temperature leading to a critical shutdown (Peter
  Ujfalusi)"

* tag 'thermal-v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
  thermal: ti-soc-thermal: Disable the CPU PM notifier for OMAP4430

* acpi-fan:
  ACPI: fan: Initialize performance state sysfs attribute

* pm-cpuidle:
  cpuidle: tegra: Annotate tegra_pm_set_cpu_in_lp2() with RCU_NONIDLE

pseries|pnv_setup_rfi_flush already does the count cache flush setup, and
we just added entry and uaccess flushes. So the name is not very accurate
any more. In both platforms we then also immediately setup the STF flush.

Rename them to _setup_security_mitigations and fold the STF flush in.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

For simplicity in backporting, the original entry_flush test contained
a lot of duplicated code from the rfi_flush test. De-duplicate that code.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Add a test modelled on the RFI flush test which counts the number
of L1D misses doing a simple syscall with the entry flush on and off.

For simplicity of backporting, this test duplicates a lot of code from
rfi_flush. We clean that up in the next patch.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

In kup.h we currently include kup-radix.h for all 64-bit builds, which
includes Book3S and Book3E. The latter doesn't make sense, Book3E
never uses the Radix MMU.

This has worked up until now, but almost by accident, and the recent
uaccess flush changes introduced a build breakage on Book3E because of
the bad structure of the code.

So disentangle things so that we only use kup-radix.h for Book3S. This
requires some more stubs in kup.h and fixing an include in
syscall_64.c.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

IBM Power9 processors can speculatively operate on data in the L1 cache
before it has been completely validated, via a way-prediction mechanism. It
is not possible for an attacker to determine the contents of impermissible
memory using this method, since these systems implement a combination of
hardware and software security measures to prevent scenarios where
protected data could be leaked.

However these measures don't address the scenario where an attacker induces
the operating system to speculatively execute instructions using data that
the attacker controls. This can be used for example to speculatively bypass
"kernel user access prevention" techniques, as discovered by Anthony
Steinhauser of Google's Safeside Project. This is not an attack by itself,
but there is a possibility it could be used in conjunction with
side-channels or other weaknesses in the privileged code to construct an
attack.

This issue can be mitigated by flushing the L1 cache between privilege
boundaries of concern. This patch flushes the L1 cache after user accesses.

This is part of the fix for CVE-2020-4788.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

IBM Power9 processors can speculatively operate on data in the L1 cache
before it has been completely validated, via a way-prediction mechanism. It
is not possible for an attacker to determine the contents of impermissible
memory using this method, since these systems implement a combination of
hardware and software security measures to prevent scenarios where
protected data could be leaked.

However these measures don't address the scenario where an attacker induces
the operating system to speculatively execute instructions using data that
the attacker controls. This can be used for example to speculatively bypass
"kernel user access prevention" techniques, as discovered by Anthony
Steinhauser of Google's Safeside Project. This is not an attack by itself,
but there is a possibility it could be used in conjunction with
side-channels or other weaknesses in the privileged code to construct an
attack.

This issue can be mitigated by flushing the L1 cache between privilege
boundaries of concern. This patch flushes the L1 cache on kernel entry.

This is part of the fix for CVE-2020-4788.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

We are about to add an entry flush. The rfi (exit) flush test measures
the number of L1D flushes over a syscall with the RFI flush enabled and
disabled. But if the entry flush is also enabled, the effect of enabling
and disabling the RFI flush is masked.

If there is a debugfs entry for the entry flush, disable it during the RFI
flush and restore it later.
Reported-by: Spoorthy S <spoorts2@in.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Pull gfs2 fix from Andreas Gruenbacher:
 "Fix gfs2 freeze/thaw"

* tag 'gfs2-v5.10-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Fix regression in freeze_go_sync

Pull nfsd fix from Bruce Fields:
 "Just one quick fix for a tracing oops"

* tag 'nfsd-5.10-2' of git://linux-nfs.org/~bfields/linux:
  SUNRPC: Fix oops in the rpc_xdr_buf event class

Merge tag 'linux-kselftest-kunit-fixes-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kunit fixes from Shuah Khan:
 "Several fixes to Kunit documentation and tools, and to not pollute
  the source directory.

  Also remove the incorrect kunit .gitattributes file"

* tag 'linux-kselftest-kunit-fixes-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: fix display of failed expectations for strings
  kunit: tool: fix extra trailing \n in raw + parsed test output
  kunit: tool: print out stderr from make (like build warnings)
  KUnit: Docs: usage: wording fixes
  KUnit: Docs: style: fix some Kconfig example issues
  KUnit: Docs: fix a wording typo
  kunit: Do not pollute source directory with generated files (test.log)
  kunit: Do not pollute source directory with generated files (.kunitconfig)
  kunit: tool: fix pre-existing python type annotation errors
  kunit: Fix kunit.py parse subcommand (use null build_dir)
  kunit: tool: unmark test_data as binary blobs

At the start of driver initialization, we do not know what bias
setting the bootloader has configured the system for and we only know
for certain the very first time we do a transition.

However, since the initial value of the comparison index is -EINVAL,
this negative value results in an array out of bound access on the
very first transition.

Since we don't know what the setting is, we just set the bias
configuration as there is nothing to compare against. This prevents
the array out of bound access.

NOTE: Even though we could use a more relaxed check of "< 0" the only
valid values(ignoring cosmic ray induced bitflips) are -EINVAL, 0+.

Fixes: 40b1936e ("regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver")
Link: https://lore.kernel.org/linux-mm/CA+G9fYuk4imvhyCN7D7T6PMDH6oNp6HDCRiTUKMQ6QXXjBa4ag@mail.gmail.com/Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20201118145009.10492-1-nm@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

Patch 541656d3 ("gfs2: freeze should work on read-only mounts") changed
the check for glock state in function freeze_go_sync() from "gl->gl_state
== LM_ST_SHARED" to "gl->gl_req == LM_ST_EXCLUSIVE".  That's wrong and it
regressed gfs2's freeze/thaw mechanism because it caused only the freezing
node (which requests the glock in EX) to queue freeze work.

All nodes go through this go_sync code path during the freeze to drop their
SHared hold on the freeze glock, allowing the freezing node to acquire it
in EXclusive mode. But all the nodes must freeze access to the file system
locally, so they ALL must queue freeze work. The freeze_work calls
freeze_func, which makes a request to reacquire the freeze glock in SH,
effectively blocking until the thaw from the EX holder. Once thawed, the
freezing node drops its EX hold on the freeze glock, then the (blocked)
freeze_func reacquires the freeze glock in SH again (on all nodes, including
the freezer) so all nodes go back to a thawed state.

This patch changes the check back to gl_state == LM_ST_SHARED like it was
prior to 541656d3.

Fixes: 541656d3 ("gfs2: freeze should work on read-only mounts")
Cc: stable@vger.kernel.org # v5.8+
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

Add missing define of ALIGN_DOWN to make the test build and run.  In
addition, __sg_alloc_table_from_pages now support unaligned maximum
segment, so adapt the test result accordingly.

Fixes: 07da1223 ("lib/scatterlist: Add support in dynamic allocation of SG table from pages")
Link: https://lore.kernel.org/r/20201115120623.139113-1-leon@kernel.orgSigned-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Pull input fixes from Dmitry Torokhov:
 "A fix for use-after-free in the Sun keyboard driver, a fix to firmware
  updates on newer ICs in the Elan touchpad diver, and a couple misc
  driver fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: elan_i2c - fix firmware update on newer ICs
  Input: resistive-adc-touch - fix kconfig dependency on IIO_BUFFER
  Input: sunkbd - avoid use-after-free in teardown paths
  Input: i8042 - allow insmod to succeed on devices without an i8042 controller
  Input: adxl34x - clean up a data type in adxl34x_probe()

Pull s390 fixes from Heiko Carstens:

 - fix system call exit path; avoid return to user space with any
   TIF/CIF/PIF set

 - fix file permission for cpum_sfb_size parameter

 - another small defconfig update

* tag 's390-5.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/cpum_sf.c: fix file permission for cpum_sfb_size
  s390: update defconfigs
  s390: fix system call exit path

Pull MIPS fixes from Thomas Bogendoerfer:

 - fix bug preventing booting on several platforms

 - fix for build error, when modules need has_transparent_hugepage

 - fix for memleak in alchemy clk setup

* tag 'mips_fixes_5.10_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: Alchemy: Fix memleak in alchemy_clk_setup_cpu
  MIPS: kernel: Fix for_each_memblock conversion
  MIPS: export has_transparent_hugepage() for modules

Merge tag 'perf-tools-fixes-for-v5.10-2020-11-17' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix file corruption due to event deletion in 'perf inject'.

 - Update arch/x86/lib/mem{cpy,set}_64.S copies used in 'perf bench mem
   memcpy', silencing perf build warning.

 - Avoid an msan warning in a copied stack in 'perf test'.

 - Correct tracepoint field name "flags" in ARM's CS-ETM hardware
   tracing 'perf test' entry.

 - Update branch sample pattern for cs-etm to cope with excluding guest
   in userspace counting.

 - Don't free "lock_seq_stat" if read_count isn't zero in 'perf lock'.

* tag 'perf-tools-fixes-for-v5.10-2020-11-17' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf test: Avoid an msan warning in a copied stack.
  perf inject: Fix file corruption due to event deletion
  perf test: Update branch sample pattern for cs-etm
  perf test: Fix a typo in cs-etm testing
  tools arch: Update arch/x86/lib/mem{cpy,set}_64.S copies used in 'perf bench mem memcpy'
  perf lock: Don't free "lock_seq_stat" if read_count isn't zero
  perf lock: Correct field name "flags"

Pull RCU fix from Paul McKenney:
 "A single commit that fixes a bug that was introduced a couple of merge
  windows ago, but which rather more recently converged to an
  agreed-upon fix. The bug is that interrupts can be incorrectly enabled
  while holding an irq-disabled spinlock. This can of course result in
  self-deadlocks.

  The bug is a bit difficult to trigger. It requires that a preempted
  task be blocking a preemptible-RCU grace period long enough to trigger
  an RCU CPU stall warning. In addition, an interrupt must occur at just
  the right time, and that interrupt's handler must acquire that same
  irq-disabled spinlock. Still, a deadlock is a deadlock.

  Furthermore, we do now have a fix, and that fix survives kernel test
  robot, -next, and rcutorture testing. It has also been verified by
  Sebastian as fixing the bug. Therefore..."

* 'urgent-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  rcu: Don't invoke try_invoke_on_locked_down_task() with irqs disabled

If the calls to of_match_device(), of_alias_get_id(),
devm_ioremap_resource(), devm_regmap_init_mmio() or devm_clk_get()
fail on probe of the NPCM FIU SPI driver, the spi_controller struct is
erroneously not freed.

Fix by switching over to the new devm_spi_alloc_master() helper.

Fixes: ace55c41 ("spi: npcm-fiu: add NPCM FIU controller driver")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: <stable@vger.kernel.org> # v5.4+: 5e844cc3: spi: Introduce device-managed SPI controller allocation
Cc: <stable@vger.kernel.org> # v5.4+
Cc: Tomer Maimon <tmaimon77@gmail.com>
Link: https://lore.kernel.org/r/a420c23a363a3bc9aa684c6e790c32a8af106d17.1605512876.git.lukas@wunner.deSigned-off-by: Mark Brown <broonie@kernel.org>

It turns out the IRQs most like can be unmasked before the controller is
enabled with no problematic consequences. The manual doesn't explicitly
state that, but the examples perform the controller initialization
procedure in that order. So the commit da8f5890 ("spi: dw: Unmask IRQs
after enabling the chip") hasn't been that required as I thought. But
anyway setting the IRQs up after the chip enabling still worth adding
since it has simplified the code a bit. The problem is that it has
introduced a potential bug. The transfer handler pointer is now
initialized after the IRQs are enabled. That may and eventually will cause
an invalid or uninitialized callback invocation. Fix that just by
performing the callback initialization before the IRQ unmask procedure.

Fixes: da8f5890 ("spi: dw: Unmask IRQs after enabling the chip")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Link: https://lore.kernel.org/r/20201117094054.4696-1-Sergey.Semin@baikalelectronics.ruSigned-off-by: Mark Brown <broonie@kernel.org>

When adding __user annotations in commit 2adf5352, the
strncpy_from_user() function declaration for the
CONFIG_GENERIC_STRNCPY_FROM_USER case was missed. Fix it.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Message-Id: <20200831210937.17938-1-laurent.pinchart@ideasonboard.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

Pull cpufreq-arm fixes for 5.10-rc5 from Viresh Kumar:

"- tegra186: Fix ->get() callback.
 - arm/scmi: Add dummy clock provider to fix failure."

* 'cpufreq/arm/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
  cpufreq: scmi: Fix OPP addition failure with a dummy clock provider
  cpufreq: tegra186: Fix get frequency callback

If the clk_register fails, we should free h before
function returns to prevent memleak.

Fixes: 47440229 ("MIPS: Alchemy: clock framework integration of onchip clocks")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

The loop over all memblocks works with PFNs and not physical
addresses, so we need for_each_mem_pfn_range().

Fixes: b10d6bca ("arch, drivers: replace for_each_membock() with for_each_mem_range()")
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>

Commit dd461cd9 ("opp: Allow dev_pm_opp_get_opp_table() to return
-EPROBE_DEFER") handles -EPROBE_DEFER for the clock/interconnects within
_allocate_opp_table() which is called from dev_pm_opp_add and it
now propagates the error back to the caller.

SCMI performance domain re-used clock bindings to keep it simple. However
with the above mentioned change, if clock property is present in a device
node, opps fails to get added with below errors until clk_get succeeds.

 cpu0: failed to add opp 450000000Hz
 cpu0: failed to add opps to the device
 ....(errors on cpu1-cpu4)
 cpu5: failed to add opp 450000000Hz
 cpu5: failed to add opps to the device

So, in order to fix the issue, we need to register dummy clock provider.
With the dummy clock provider, clk_get returns NULL(no errors!), then opp
core proceeds to add OPPs for the CPUs.

Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Fixes: dd461cd9 ("opp: Allow dev_pm_opp_get_opp_table() to return -EPROBE_DEFER")
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

Commit b89c01c9 ("cpufreq: tegra186: Fix initial frequency")
implemented the CPUFREQ 'get' callback to determine the current
operating frequency for each CPU. This implementation used a simple
looked up to determine the current operating frequency. The problem
with this is that frequency table for different Tegra186 devices may
vary and so the default boot frequency for Tegra186 device may or may
not be present in the frequency table. If the default boot frequency is
not present in the frequency table, this causes the function
tegra186_cpufreq_get() to return 0 and in turn causes cpufreq_online()
to fail which prevents CPUFREQ from working.

Fix this by always calculating the CPU frequency based upon the current
'ndiv' setting for the CPU. Note that the CPU frequency for Tegra186 is
calculated by reading the current 'ndiv' setting, multiplying by the
CPU reference clock and dividing by a constant divisor.

Fixes: b89c01c9 ("cpufreq: tegra186: Fix initial frequency")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

Pull ARM SoC fixes from Arnd Bergmann:
 "Around one third of the fixes this time are for dts files that list
  their ethernet controller as using 'phy-mode="rgmii"' but are changed
  to 'phy-mode="rgmii-id"' now, because the PHY drivers (realtek,
  ksz9031, dp83867, ...) now configure the internal delay based on that
  when they used to stay on the hardware default.

  The long story is archived at

    https://lore.kernel.org/netdev/CAMj1kXEEF_Un-4NTaD5iUN0NoZYaJQn-rPediX0S6oRiuVuW-A@mail.gmail.com/

  I was trying to hold off on the bugfixes until there was a solution
  that would avoid breaking all boards, but that does not seem to be
  happening any time soon, so I am now sending the correct version of
  the dts files to ensure that at least these machines can use their
  network devices again.

  The other changes this time are:

   - Updating the MAINTAINER lists for Allwinner and Samsung SoCs

   - Multiple i.MX8MN machines get updates for their CPU operating
     points to match the data sheet

   - A revert for a dts patch that caused a regression in USB support on
     Odroid U3

   - Two fixes for the AMD Tee driver, addressing a memory leak and
     missing locking

   - Mark the network subsystem on qoriq-fman3 as cache coherent for
     correctness as better performance.

   - Minor dts fixes elsewhere, addressing dtc warnings and similar
     problems"

* tag 'arm-soc-fixes-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits)
  ARM: dts: exynos: revert "add input clock to CMU in Exynos4412 Odroid"
  ARM: dts: imx50-evk: Fix the chip select 1 IOMUX
  arm64: dts: imx8mm: fix voltage for 1.6GHz CPU operating point
  ARM: dts: stm32: Keep VDDA LDO1 always on on DHCOM
  ARM: dts: stm32: Enable thermal sensor support on stm32mp15xx-dhcor
  ARM: dts: stm32: Define VIO regulator supply on DHCOM
  ARM: dts: stm32: Fix LED5 on STM32MP1 DHCOM PDK2
  ARM: dts: stm32: Fix TA3-GPIO-C key on STM32MP1 DHCOM PDK2
  arm64: dts: renesas: r8a774e1: Add missing audio_clk_b
  tee: amdtee: synchronize access to shm list
  tee: amdtee: fix memory leak due to reset of global shm list
  arm64: dts: agilex/stratix10: Fix qspi node compatible
  ARM: dts: imx6q-prti6q: fix PHY address
  ARM: dts: vf610-zii-dev-rev-b: Fix MDIO over clocking
  arm: dts: imx6qdl-udoo: fix rgmii phy-mode for ksz9031 phy
  arm64: dts imx8mn: Remove non-existent USB OTG2
  arm64: dts: imx8mm-beacon-som: Fix Choppy BT audio
  arm64: dts: fsl: DPAA FMan DMA operations are coherent
  arm64: dts: fsl: fix endianness issue of rcpm
  arm64: dts: imx8mn-evk: fix missing PMIC's interrupt line pull-up
  ...

Pull Hyper-V fix from Wei Liu:
 "One patch from Chris to fix kexec on Hyper-V"

* tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  Drivers: hv: vmbus: Allow cleanup of VMBUS_CONNECT_CPU if disconnected

Pull vhost fixes from Michael Tsirkin:
 "Fixes all over the place, most notably vhost scsi IO error fixes"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vhost scsi: Add support for LUN resets.
  vhost scsi: add lun parser helper
  vhost scsi: fix cmd completion race
  vhost scsi: alloc cmds per vq instead of session
  vhost: add helper to check if a vq has been setup
  vdpasim: fix "mac_pton" undefined error
  swiotlb: using SIZE_MAX needs limits.h included

Fix to return the error code from
devm_reset_control_get_optional_exclusive() instaed of 0
in cqspi_probe().

Fixes: 31fb632b ("spi: Move cadence-quadspi driver to drivers/spi/")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20201116141836.2970579-1-chengzhihao1@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>