During the initialization of ip_vs_conn_net_init(), if file ip_vs_conn
or ip_vs_conn_sync fails to be created, the initialization is successful
by default. Therefore, the ip_vs_conn or ip_vs_conn_sync file doesn't
be found during the remove.

The following is the stack information:
name 'ip_vs_conn_sync'
WARNING: CPU: 3 PID: 9 at fs/proc/generic.c:712
remove_proc_entry+0x389/0x460
Modules linked in:
Workqueue: netns cleanup_net
RIP: 0010:remove_proc_entry+0x389/0x460
Call Trace:
<TASK>
__ip_vs_cleanup_batch+0x7d/0x120
ops_exit_list+0x125/0x170
cleanup_net+0x4ea/0xb00
process_one_work+0x9bf/0x1710
worker_thread+0x665/0x1080
kthread+0x2e4/0x3a0
ret_from_fork+0x1f/0x30
</TASK>

Fixes: 61b1ab45 ("IPVS: netns, add basic init per netns.")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

The `char` type with no explicit sign is sometimes signed and sometimes
unsigned. This code will break on platforms such as arm, where char is
unsigned. So mark it here as explicitly signed, so that the
todrop_counter decrement and subsequent comparison is correct.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

No need to postpone this to the commit release path, since no packets
are walking over this object, this is accessed from control plane only.
This helped uncovered UAF triggered by races with the netlink notifier.

Fixes: 9dd732e0 ("netfilter: nf_tables: memleak flow rule from commit path")
Reported-by: syzbot+8f747f62763bc6c32916@syzkaller.appspotmail.com
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

commit release path is invoked via call_rcu and it runs lockless to
release the objects after rcu grace period. The netlink notifier handler
might win race to remove objects that the transaction context is still
referencing from the commit release path.

Call rcu_barrier() to ensure pending rcu callbacks run to completion
if the list of transactions to be destroyed is not empty.

Fixes: 6001a930 ("netfilter: nftables: introduce table ownership")
Reported-by: syzbot+8f747f62763bc6c32916@syzkaller.appspotmail.com
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Recently, we got two syzkaller problems because of oversize packet
when napi frags enabled.

One of the problems is because the first seg size of the iov_iter
from user space is very big, it is 2147479538 which is bigger than
the threshold value for bail out early in __alloc_pages(). And
skb->pfmemalloc is true, __kmalloc_reserve() would use pfmemalloc
reserves without __GFP_NOWARN flag. Thus we got a warning as following:

========================================================
WARNING: CPU: 1 PID: 17965 at mm/page_alloc.c:5295 __alloc_pages+0x1308/0x16c4 mm/page_alloc.c:5295
...
Call trace:
 __alloc_pages+0x1308/0x16c4 mm/page_alloc.c:5295
 __alloc_pages_node include/linux/gfp.h:550 [inline]
 alloc_pages_node include/linux/gfp.h:564 [inline]
 kmalloc_large_node+0x94/0x350 mm/slub.c:4038
 __kmalloc_node_track_caller+0x620/0x8e4 mm/slub.c:4545
 __kmalloc_reserve.constprop.0+0x1e4/0x2b0 net/core/skbuff.c:151
 pskb_expand_head+0x130/0x8b0 net/core/skbuff.c:1654
 __skb_grow include/linux/skbuff.h:2779 [inline]
 tun_napi_alloc_frags+0x144/0x610 drivers/net/tun.c:1477
 tun_get_user+0x31c/0x2010 drivers/net/tun.c:1835
 tun_chr_write_iter+0x98/0x100 drivers/net/tun.c:2036

The other problem is because odd IPv6 packets without NEXTHDR_NONE
extension header and have big packet length, it is 2127925 which is
bigger than ETH_MAX_MTU(65535). After ipv6_gso_pull_exthdrs() in
ipv6_gro_receive(), network_header offset and transport_header offset
are all bigger than U16_MAX. That would trigger skb->network_header
and skb->transport_header overflow error, because they are all '__u16'
type. Eventually, it would affect the value for __skb_push(skb, value),
and make it be a big value. After __skb_push() in ipv6_gro_receive(),
skb->data would less than skb->head, an out of bounds memory bug occurred.
That would trigger the problem as following:

==================================================================
BUG: KASAN: use-after-free in eth_type_trans+0x100/0x260
...
Call trace:
 dump_backtrace+0xd8/0x130
 show_stack+0x1c/0x50
 dump_stack_lvl+0x64/0x7c
 print_address_description.constprop.0+0xbc/0x2e8
 print_report+0x100/0x1e4
 kasan_report+0x80/0x120
 __asan_load8+0x78/0xa0
 eth_type_trans+0x100/0x260
 napi_gro_frags+0x164/0x550
 tun_get_user+0xda4/0x1270
 tun_chr_write_iter+0x74/0x130
 do_iter_readv_writev+0x130/0x1ec
 do_iter_write+0xbc/0x1e0
 vfs_writev+0x13c/0x26c

To fix the problems, restrict the packet size less than
(ETH_MAX_MTU - NET_SKB_PAD - NET_IP_ALIGN) which has considered reserved
skb space in napi_alloc_skb() because transport_header is an offset from
skb->head. Add len check in tun_napi_alloc_frags() simply.

Fixes: 90e33d45 ("tun: enable napi_gro_frags() for TUN/TAP driver")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221029094101.1653855-1-william.xuanziyang@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Changed maintainers for vnic driver, since Dany has new responsibilities.
Also added Nick Child as reviewer.
Signed-off-by: Rick Lindsley <ricklind@us.ibm.com>
Link: https://lore.kernel.org/r/20221028203509.4070154-1-ricklind@us.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

We can't use "skb" again after passing it to qdisc_enqueue().  This is
basically identical to commit 2f09707d ("sch_sfb: Also store skb
len before calling child enqueue").

Fixes: d7f4f332 ("sch_red: update backlog as well")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ndo_start_xmit() method must not free skb when returning
NETDEV_TX_BUSY, since caller is going to requeue freed skb.

Fix it by returning NETDEV_TX_OK in case of dma_map_single() fails.

Fixes: 79f33912 ("net: fec: Add software TSO support")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Shang XiaoJing says:

====================
nfc: Fix potential memory leak of skb

There are 6 kinds of send functions can be called by nci_send_frame():
	virtual_nci_send(),
	fdp_nci_send(),
	nxp_nci_send(),
	s3fwrn5_nci_send(),
	nfcmrvl_nci_send(),
	st_nci_send();

1. virtual_nci_send() will memleak the skb, and has been fixed before.

2. fdp_nci_send() won't free the skb no matter whether write() succeed.

3-4. nxp_nci_send() and s3fwrn5_nci_send() will only free the skb when
write() failed, however write() will not free the skb by itself for when
succeeds.

5. nfcmrvl_nci_send() will call nfcmrvl_XXX_nci_send(), where some of
them will free the skb, but nfcmrvl_i2c_nci_send() only free the skb
when i2c_master_send() return >=0, and memleak will happen when
i2c_master_send() failed in nfcmrvl_i2c_nci_send().

6. st_nci_send() will queue the skb into other list and finally be
freed.

Fix the potential memory leak of skb.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

nfcmrvl_i2c_nci_send() will be called by nfcmrvl_nci_send(), and skb
should be freed in nfcmrvl_i2c_nci_send(). However, nfcmrvl_nci_send()
will only free skb when i2c_master_send() return >=0, which means skb
will memleak when i2c_master_send() failed. Free skb no matter whether
i2c_master_send() succeeds.

Fixes: b5b3e23e ("NFC: nfcmrvl: add i2c driver")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

s3fwrn5_nci_send() will call s3fwrn5_i2c_write() or s3fwrn82_uart_write(),
and free the skb if write() failed. However, even if the write() run
succeeds, the skb will not be freed in write(). As the result, the skb
will memleak. s3fwrn5_nci_send() should also free the skb when write()
succeeds.

Fixes: c04c674f ("nfc: s3fwrn5: Add driver for Samsung S3FWRN5 NFC Chip")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nxp_nci_send() will call nxp_nci_i2c_write(), and only free skb when
nxp_nci_i2c_write() failed. However, even if the nxp_nci_i2c_write()
run succeeds, the skb will not be freed in nxp_nci_i2c_write(). As the
result, the skb will memleak. nxp_nci_send() should also free the skb
when nxp_nci_i2c_write() succeeds.

Fixes: dece4585 ("NFC: nxp-nci: Add support for NXP NCI chips")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

fdp_nci_send() will call fdp_nci_i2c_write that will not free skb in
the function. As a result, when fdp_nci_i2c_write() finished, the skb
will memleak. fdp_nci_send() should free skb after fdp_nci_i2c_write()
finished.

Fixes: a06347c0 ("NFC: Add Intel Fields Peak NFC solution driver")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

DSA tagging protocol drivers can be changed at runtime through sysfs and
at probe time through the device tree (support for the latter was added
later).

When changing through sysfs, it is assumed that the module for the new
tagging protocol was already loaded into the kernel (in fact this is
only a concern for Ocelot/Felix switches, where we have tag_ocelot.ko
and tag_ocelot_8021q.ko; for every other switch, the default and
alternative protocols are compiled within the same .ko, so there is
nothing for the user to load).

The kernel cannot currently call request_module(), because it has no way
of constructing the modalias name of the tagging protocol driver
("dsa_tag-%d", where the number is one of DSA_TAG_PROTO_*_VALUE).
The device tree only contains the string name of the tagging protocol
("ocelot-8021q"), and the only mapping between the string and the
DSA_TAG_PROTO_OCELOT_8021Q_VALUE is present in tag_ocelot_8021q.ko.
So this is a chicken-and-egg situation and dsa_core.ko has nothing based
on which it can automatically request the insertion of the module.

As a consequence, if CONFIG_NET_DSA_TAG_OCELOT_8021Q is built as module,
the switch will forever defer probing.

The long-term solution is to make DSA call request_module() somehow,
but that probably needs some refactoring.

What we can do to keep operating with existing device tree blobs is to
cancel the attempt to change the tagging protocol with the one specified
there, and to remain operating with the default one. Depending on the
situation, the default protocol might still allow some functionality
(in the case of ocelot, it does), and it's better to have that than to
fail to probe.

Fixes: deff7107 ("net: dsa: Allow default tag protocol to be overridden from DT")
Link: https://lore.kernel.org/lkml/20221027113248.420216-1-michael@walle.cc/Reported-by: Heiko Thiery <heiko.thiery@gmail.com>
Reported-by: Michael Walle <michael@walle.cc>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Michael Walle <michael@walle.cc>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221027145439.3086017-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

ADIN1110 was registering netdev_notifiers on each device probe.
This leads to warnings/probe failures because of double registration
of the same notifier when to adin1110/2111 devices are connected to
the same system.

Move the registration of netdev_notifiers in module init call,
in this way multiple driver instances can use the same notifiers.

Fixes: bc93e19d ("net: ethernet: adi: Add ADIN1110 support")
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Link: https://lore.kernel.org/r/20221027095655.89890-2-alexandru.tachici@analog.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pavel Begunkov says:

====================
a few corrections for SOCK_SUPPORT_ZC

There are several places/cases that got overlooked in regards to
SOCK_SUPPORT_ZC. We're lacking the flag for IPv6 UDP sockets and
accepted TCP sockets. We also should clear the flag when someone
tries to hijack a socket by replacing the ->sk_prot callbacks.
====================

Link: https://lore.kernel.org/r/cover.1666825799.git.asml.silence@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Without this only the client initiated tcp sockets have SOCK_SUPPORT_ZC.
The listening socket on the server also has it, but the accepted
connections didn't, which meant IORING_OP_SEND[MSG]_ZC will always
fails with -EOPNOTSUPP.

Fixes: e993ffe3 ("net: flag sockets supporting msghdr originated zerocopy")
Cc: <stable@vger.kernel.org> # 6.0
CC: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/io-uring/20221024141503.22b4e251@kernel.org/T/#m38aa19b0b825758fb97860a38ad13122051f9ddaSigned-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Remove SOCK_SUPPORT_ZC when we're setting ulp as it might not support
msghdr::ubuf_info, e.g. like TLS replacing ->sk_prot with a new set of
handlers.

Cc: <stable@vger.kernel.org> # 6.0
Reported-by: Jakub Kicinski <kuba@kernel.org>
Fixes: e993ffe3 ("net: flag sockets supporting msghdr originated zerocopy")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

sockmap replaces ->sk_prot with its own callbacks, we should remove
SOCK_SUPPORT_ZC as the new proto doesn't support msghdr::ubuf_info.

Cc: <stable@vger.kernel.org> # 6.0
Reported-by: Jakub Kicinski <kuba@kernel.org>
Fixes: e993ffe3 ("net: flag sockets supporting msghdr originated zerocopy")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Mark udp ipv6 as supporting msghdr::ubuf_info. In the original commit
SOCK_SUPPORT_ZC was supposed to be set by a udp_init_sock() call from
udp6_init_sock(), but
d38afeec ("tcp/udp: Call inet6_destroy_sock() in IPv6 ...")
removed it and so ipv6 udp misses the flag.

Cc: <stable@vger.kernel.org> # 6.0
Fixes: e993ffe3 ("net: flag sockets supporting msghdr originated zerocopy")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Update enic maintainers.
Signed-off-by: Govindarajulu Varadarajan <govind.varadar@gmail.com>
Link: https://lore.kernel.org/r/20221028042159.735670-1-govind.varadar@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

I missed one of the families in OvS when annotating .resv_start_op.
This triggers the warning added in commit ce48ebdd ("genetlink:
limit the use of validation workarounds to old ops").

Reported-by: syzbot+40eb8c0447c0e47a7e9b@syzkaller.appspotmail.com
Fixes: 9c5d03d3 ("genetlink: start to validate reserved header bytes")
Link: https://lore.kernel.org/r/20221028032501.2724270-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Mark the validation fields as private, users shouldn't set
them directly and they are too complicated to explain in
a more succinct way (there's already a long explanation
in the comment above).

The strict_start_type field is set directly and has a dedicated
comment so move that above the "private" section.

Link: https://lore.kernel.org/r/20221027212107.2639255-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Instead of generic description, mention what reset_lock actually
protects i.e. lock to serialize xmit and tx_timeout execution.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

kmemleak reported memory leaks in dsa_loop_init():

kmemleak: 12 new suspected memory leaks

unreferenced object 0xffff8880138ce000 (size 2048):
  comm "modprobe", pid 390, jiffies 4295040478 (age 238.976s)
  backtrace:
    [<000000006a94f1d5>] kmalloc_trace+0x26/0x60
    [<00000000a9c44622>] phy_device_create+0x5d/0x970
    [<00000000d0ee2afc>] get_phy_device+0xf3/0x2b0
    [<00000000dca0c71f>] __fixed_phy_register.part.0+0x92/0x4e0
    [<000000008a834798>] fixed_phy_register+0x84/0xb0
    [<0000000055223fcb>] dsa_loop_init+0xa9/0x116 [dsa_loop]
    ...

There are two reasons for memleak in dsa_loop_init().

First, fixed_phy_register() create and register phy_device:

fixed_phy_register()
  get_phy_device()
    phy_device_create() # freed by phy_device_free()
  phy_device_register() # freed by phy_device_remove()

But fixed_phy_unregister() only calls phy_device_remove().
So the memory allocated in phy_device_create() is leaked.

Second, when mdio_driver_register() fail in dsa_loop_init(),
it just returns and there is no cleanup for phydevs.

Fix the problems by catching the error of mdio_driver_register()
in dsa_loop_init(), then calling both fixed_phy_unregister() and
phy_device_free() to release phydevs.
Also add a function for phydevs cleanup to avoid duplacate.

Fixes: 98cd1552 ("net: dsa: Mock-up driver")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from 802.15.4 (Zigbee et al).

  Current release - regressions:

   - ipa: fix bugs in the register conversion for IPA v3.1 and v3.5.1

  Current release - new code bugs:

   - mptcp: fix abba deadlock on fastopen

   - eth: stmmac: rk3588: allow multiple gmac controllers in one system

  Previous releases - regressions:

   - ip: rework the fix for dflt addr selection for connected nexthop

   - net: couple more fixes for misinterpreting bits in struct page
     after the signature was added

  Previous releases - always broken:

   - ipv6: ensure sane device mtu in tunnels

   - openvswitch: switch from WARN to pr_warn on a user-triggerable path

   - ethtool: eeprom: fix null-deref on genl_info in dump

   - ieee802154: more return code fixes for corner cases in
     dgram_sendmsg

   - mac802154: fix link-quality-indicator recording

   - eth: mlx5: fixes for IPsec, PTP timestamps, OvS and conntrack
     offload

   - eth: fec: limit register access on i.MX6UL

   - eth: bcm4908_enet: update TX stats after actual transmission

   - can: rcar_canfd: improve IRQ handling for RZ/G2L

  Misc:

   - genetlink: piggy back on the newly added resv_op_start to enforce
     more sanity checks on new commands"

* tag 'net-6.1-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
  net: enetc: survive memory pressure without crashing
  kcm: do not sense pfmemalloc status in kcm_sendpage()
  net: do not sense pfmemalloc status in skb_append_pagefrags()
  net/mlx5e: Fix macsec sci endianness at rx sa update
  net/mlx5e: Fix wrong bitwise comparison usage in macsec_fs_rx_add_rule function
  net/mlx5e: Fix macsec rx security association (SA) update/delete
  net/mlx5e: Fix macsec coverity issue at rx sa update
  net/mlx5: Fix crash during sync firmware reset
  net/mlx5: Update fw fatal reporter state on PCI handlers successful recover
  net/mlx5e: TC, Fix cloned flow attr instance dests are not zeroed
  net/mlx5e: TC, Reject forwarding from internal port to internal port
  net/mlx5: Fix possible use-after-free in async command interface
  net/mlx5: ASO, Create the ASO SQ with the correct timestamp format
  net/mlx5e: Update restore chain id for slow path packets
  net/mlx5e: Extend SKB room check to include PTP-SQ
  net/mlx5: DR, Fix matcher disconnect error flow
  net/mlx5: Wait for firmware to enable CRS before pci_restore_state
  net/mlx5e: Do not increment ESN when updating IPsec ESN state
  netdevsim: remove dir in nsim_dev_debugfs_init() when creating ports dir failed
  netdevsim: fix memory leak in nsim_drv_probe() when nsim_dev_resources_register() failed
  ...

Pull execve fixes from Kees Cook:

 - Fix an ancient signal action copy race (Bernd Edlinger)

 - Fix a memory leak in ELF loader, when under memory pressure (Li
   Zetao)

* tag 'execve-v6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  fs/binfmt_elf: Fix memory leak in load_elf_binary()
  exec: Copy oldsighand->action under spin-lock

Pull hardening fixes from Kees Cook:

 - Fix older Clang vs recent overflow KUnit test additions (Nick
   Desaulniers, Kees Cook)

 - Fix kern-doc visibility for overflow helpers (Kees Cook)

* tag 'hardening-v6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  overflow: Refactor test skips for Clang-specific issues
  overflow: disable failing tests for older clang versions
  overflow: Fix kern-doc markup for functions

Pull media fixes from Mauro Carvalho Chehab:
 "A bunch of patches addressing issues in the vivid driver and adding
  new checks in V4L2 to validate the input parameters from some ioctls"

* tag 'media/v6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: vivid.rst: loop_video is set on the capture devnode
  media: vivid: set num_in/outputs to 0 if not supported
  media: vivid: drop GFP_DMA32
  media: vivid: fix control handler mutex deadlock
  media: videodev2.h: V4L2_DV_BT_BLANKING_HEIGHT should check 'interlaced'
  media: v4l2-dv-timings: add sanity checks for blanking values
  media: vivid: dev->bitmap_cap wasn't freed in all cases
  media: vivid: s_fbuf: add more sanity checks

Pull fscrypt fix from Eric Biggers:
 "Fix a memory leak that was introduced by a change that went into -rc1"

* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
  fscrypt: fix keyring memory leak on mount failure

Under memory pressure, enetc_refill_rx_ring() may fail, and when called
during the enetc_open() -> enetc_setup_rxbdr() procedure, this is not
checked for.

An extreme case of memory pressure will result in exactly zero buffers
being allocated for the RX ring, and in such a case it is expected that
hardware drops all RX packets due to lack of buffers.

This does not happen, because the reset-default value of the consumer
and produces index is 0, and this makes the ENETC think that all buffers
have been initialized and that it owns them (when in reality none were).

The hardware guide explains this best:

| Configure the receive ring producer index register RBaPIR with a value
| of 0. The producer index is initially configured by software but owned
| by hardware after the ring has been enabled. Hardware increments the
| index when a frame is received which may consume one or more BDs.
| Hardware is not allowed to increment the producer index to match the
| consumer index since it is used to indicate an empty condition. The ring
| can hold at most RBLENR[LENGTH]-1 received BDs.
|
| Configure the receive ring consumer index register RBaCIR. The
| consumer index is owned by software and updated during operation of the
| of the BD ring by software, to indicate that any receive data occupied
| in the BD has been processed and it has been prepared for new data.
| - If consumer index and producer index are initialized to the same
|   value, it indicates that all BDs in the ring have been prepared and
|   hardware owns all of the entries.
| - If consumer index is initialized to producer index plus N, it would
|   indicate N BDs have been prepared. Note that hardware cannot start if
|   only a single buffer is prepared due to the restrictions described in
|   (2).
| - Software may write consumer index to match producer index anytime
|   while the ring is operational to indicate all received BDs prior have
|   been processed and new BDs prepared for hardware.

Normally, the value of rx_ring->rcir (consumer index) is brought in sync
with the rx_ring->next_to_use software index, but this only happens if
page allocation ever succeeded.

When PI==CI==0, the hardware appears to receive frames and write them to
DMA address 0x0 (?!), then set the READY bit in the BD.

The enetc_clean_rx_ring() function (and its XDP derivative) is naturally
not prepared to handle such a condition. It will attempt to process
those frames using the rx_swbd structure associated with index i of the
RX ring, but that structure is not fully initialized (enetc_new_page()
does all of that). So what happens next is undefined behavior.

To operate using no buffer, we must initialize the CI to PI + 1, which
will block the hardware from advancing the CI any further, and drop
everything.

The issue was seen while adding support for zero-copy AF_XDP sockets,
where buffer memory comes from user space, which can even decide to
supply no buffers at all (example: "xdpsock --txonly"). However, the bug
is present also with the network stack code, even though it would take a
very determined person to trigger a page allocation failure at the
perfect time (a series of ifup/ifdown under memory pressure should
eventually reproduce it given enough retries).

Fixes: d4fd0404 ("enetc: Introduce basic PF and VF ENETC ethernet drivers")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://lore.kernel.org/r/20221027182925.3256653-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Similar to changes done in TCP in blamed commit.
We should not sense pfmemalloc status in sendpage() methods.

Fixes: 32614006 ("tcp: TX zerocopy should not sense pfmemalloc status")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221027040637.1107703-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

skb_append_pagefrags() is used by af_unix and udp sendpage()
implementation so far.

In commit 32614006 ("tcp: TX zerocopy should not sense
pfmemalloc status") we explained why we should not sense
pfmemalloc status for pages owned by user space.

We should also use skb_fill_page_desc_noacc()
in skb_append_pagefrags() to avoid following KCSAN report:

BUG: KCSAN: data-race in lru_add_fn / skb_append_pagefrags

write to 0xffffea00058fc1c8 of 8 bytes by task 17319 on cpu 0:
__list_add include/linux/list.h:73 [inline]
list_add include/linux/list.h:88 [inline]
lruvec_add_folio include/linux/mm_inline.h:323 [inline]
lru_add_fn+0x327/0x410 mm/swap.c:228
folio_batch_move_lru+0x1e1/0x2a0 mm/swap.c:246
lru_add_drain_cpu+0x73/0x250 mm/swap.c:669
lru_add_drain+0x21/0x60 mm/swap.c:773
free_pages_and_swap_cache+0x16/0x70 mm/swap_state.c:311
tlb_batch_pages_flush mm/mmu_gather.c:59 [inline]
tlb_flush_mmu_free mm/mmu_gather.c:256 [inline]
tlb_flush_mmu+0x5b2/0x640 mm/mmu_gather.c:263
tlb_finish_mmu+0x86/0x100 mm/mmu_gather.c:363
exit_mmap+0x190/0x4d0 mm/mmap.c:3098
__mmput+0x27/0x1b0 kernel/fork.c:1185
mmput+0x3d/0x50 kernel/fork.c:1207
copy_process+0x19fc/0x2100 kernel/fork.c:2518
kernel_clone+0x166/0x550 kernel/fork.c:2671
__do_sys_clone kernel/fork.c:2812 [inline]
__se_sys_clone kernel/fork.c:2796 [inline]
__x64_sys_clone+0xc3/0xf0 kernel/fork.c:2796
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

read to 0xffffea00058fc1c8 of 8 bytes by task 17325 on cpu 1:
page_is_pfmemalloc include/linux/mm.h:1817 [inline]
__skb_fill_page_desc include/linux/skbuff.h:2432 [inline]
skb_fill_page_desc include/linux/skbuff.h:2453 [inline]
skb_append_pagefrags+0x210/0x600 net/core/skbuff.c:3974
unix_stream_sendpage+0x45e/0x990 net/unix/af_unix.c:2338
kernel_sendpage+0x184/0x300 net/socket.c:3561
sock_sendpage+0x5a/0x70 net/socket.c:1054
pipe_to_sendpage+0x128/0x160 fs/splice.c:361
splice_from_pipe_feed fs/splice.c:415 [inline]
__splice_from_pipe+0x222/0x4d0 fs/splice.c:559
splice_from_pipe fs/splice.c:594 [inline]
generic_splice_sendpage+0x89/0xc0 fs/splice.c:743
do_splice_from fs/splice.c:764 [inline]
direct_splice_actor+0x80/0xa0 fs/splice.c:931
splice_direct_to_actor+0x305/0x620 fs/splice.c:886
do_splice_direct+0xfb/0x180 fs/splice.c:974
do_sendfile+0x3bf/0x910 fs/read_write.c:1255
__do_sys_sendfile64 fs/read_write.c:1323 [inline]
__se_sys_sendfile64 fs/read_write.c:1309 [inline]
__x64_sys_sendfile64+0x10c/0x150 fs/read_write.c:1309
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

value changed: 0x0000000000000000 -> 0xffffea00058fc188

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 17325 Comm: syz-executor.0 Not tainted 6.1.0-rc1-syzkaller-00158-g440b7895-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/11/2022

Fixes: 32614006 ("tcp: TX zerocopy should not sense pfmemalloc status")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221027040346.1104204-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The cited commit at rx sa update operation passes the sci object
attribute, in the wrong endianness and not as expected by the HW
effectively create malformed hw sa context in case of update rx sa
consequently, HW produces unexpected MACsec packets which uses this
sa.

Fix by passing sci to create macsec object with the correct endianness,
while at it add __force u64 to prevent sparse check error of type
"sparse: error: incorrect type in assignment".

Fixes: aae3454e ("net/mlx5e: Add MACsec offload Rx command support")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221026135153.154807-16-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The cited commit produces a sparse check error of type
"sparse: error: restricted __be64 degrades to integer". The
offending line wrongly did a bitwise operation between two different
storage types one of 64 bit when the other smaller side is 16 bit
which caused the above sparse error, furthermore bitwise operation
usage here is wrong in the first place as the constant MACSEC_PORT_ES
is not a bitwise field.

Fix by using the right mask to get the lower 16 bit if the sci number,
and use comparison operator '==' instead of bitwise '&' operator.

Fixes: 3b20949c ("net/mlx5e: Add MACsec RX steering rules")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221026135153.154807-15-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The cited commit adds the support for update/delete MACsec Rx SA,
naturally, these operations need to check if the SA in question exists
to update/delete the SA and return error code otherwise, however they
do just the opposite i.e. return with error if the SA exists

Fix by change the check to return error in case the SA in question does
not exist, adjust error message and code accordingly.

Fixes: aae3454e ("net/mlx5e: Add MACsec offload Rx command support")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221026135153.154807-14-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The cited commit at update rx sa operation passes object attributes
to MACsec object create function without initializing/setting all
attributes fields leaving some of them with garbage values, therefore
violating the implicit assumption at create object function, which
assumes that all input object attributes fields are set.

Fix by initializing the object attributes struct to zero, thus leaving
unset fields with the legal zero value.

Fixes: aae3454e ("net/mlx5e: Add MACsec offload Rx command support")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Lior Nahmanson <liorna@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221026135153.154807-13-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When setting Bluefield to DPU NIC mode using mlxconfig tool +  sync
firmware reset flow, we run into scenario where the host was not
eswitch manager at the time of mlx5 driver load but becomes eswitch manager
after the sync firmware reset flow. This results in null pointer
access of mpfs structure during mac filter add. This change prevents null
pointer access but mpfs table entries will not be added.

Fixes: 5ec69744 ("net/mlx5: Add support for devlink reload action fw activate")
Signed-off-by: Suresh Devarakonda <ramad@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Bodong Wang <bodong@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221026135153.154807-12-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Update devlink health fw fatal reporter state to "healthy" is needed by
strictly calling devlink_health_reporter_state_update() after recovery
was done by PCI error handler. This is needed when fw_fatal reporter was
triggered due to PCI error. Poll health is called and set reporter state
to error. Health recovery failed (since EEH didn't re-enable the PCI).
PCI handlers keep on recover flow and succeed later without devlink
acknowledgment. Fix this by adding devlink state update at the end of
the PCI handler recovery process.

Fixes: 6181e5cb ("devlink: add support for reporter recovery completion")
Signed-off-by: Roy Novich <royno@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221026135153.154807-11-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

On multi table split the driver creates a new attr instance with
data being copied from prev attr instance zeroing action flags.
Also need to reset dests properties to avoid incorrect dests per attr.

Fixes: 8300f225 ("net/mlx5e: Create new flow attr for multi table actions")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221026135153.154807-10-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>