- 08 May, 2018 10 commits
-
-
Chaitra P B authored
Added function _base_display_fwpkg_version, which sends FWUpload request to pull FW package version from FW Image Header. Now driver prints FW package version in addition to FW version if the PackageVersion is valid. Signed-off-by:
Chaitra P B <chaitra.basappa@broadcom.com> Signed-off-by:
Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Chaitra P B authored
In function _scsih_add_device, for each device connected to an enclosure, driver reads the enclosure page(To get details like enclosure handle, enclosure logical ID, enclosure level etc.) With this patch, instead of reading enclosure page everytime, driver maintains a list for enclosure device(During enclosure add event, enclosure device is added to the list and removed from the list on delete events) and uses the enclosure page from the list. Signed-off-by:
-
Chaitra P B authored
Events were not processed during driver unload, hence unloading of driver doesn't complete when drives are disconnected while unloading of driver. So don't block events in ISR path, i,e., remove the flag ioc->remove_host so that events are getting processed during driver unload. Thus allowing driver unload to complete by processing drive removal events during driver unload. Signed-off-by:
-
Chaitra P B authored
For 24 port HBA's events generated by IOC are more in certain cases and the current circular buffer may be overwritten.Hence increased the event log buffer to accommodate more events. Signed-off-by:
-
Chaitra P B authored
The SAS Device Discovery Error Event is sent to the host when discovery for a particular device is failed during discovery, even after maximum retries by the IOC. Signed-off-by:
-
Chaitra P B authored
Enhanced DMA allocation for Sense Buffer, if the allocation does not fit within same 4GB.Introduced is_MSB_are_same function to check if allocted buffer within 4GB range or not. Signed-off-by:
-
Chaitra P B authored
For every IO, memory of PAGE size is allocated for handling NVMe native PRPS. And in addition to that for every IO (chains need per IO * chain buffer size, e.g. 38 * 128byte) amount of memory is allocated for chain buffers. However, at any point of time; the IO request can be for NVMe target device (where PRP's page is used for framing PRP's) or can be for SCSI target device (where chain buffers are used for framing chain SGE's). This patch modifies the driver to reuse same pre-allocated PRP page buffers as a chain buffer for IO's targeted for SCSI target devices. No need to allocate separate buffers for chain SGE's buffers. Suppose if the number of chain buffers need for IO doesn't fit in the PRP Page size then driver maintain's separate buffers for those extra chain buffers that exceeds the PRP page size. For example consider PRP page size as 4K and chain buffer size as 128 bytes, then number of chain buffers that can fit in PRP page is 4096/128 => 32. if the number of chain buffer need per IO exceeds 32; for example consider number of chains need per IO is 36 then for remaining 4 chain buffer's driver allocates them individual. Signed-off-by:
-
Chaitra P B authored
Introduces Chain lookup table/tracker and implements accessing chain buffer using smid. Removed link list based access of chain buffer which requires lock and allocated as many chains needed. Signed-off-by:
-
Chaitra P B authored
Instead of allocating RDPQ array (This stores the address's of each RDPQ pools) at run time, now it will be allocated once during driver load time and same will be reused during host reset operation also (instead of allocating & freeing this buffer on the fly during every host reset operation) and then freed during driver unload. Signed-off-by:
-
Chaitra P B authored
This patch fixes sparse warnings and bugs on big endian systems. Signed-off-by:
-
- 02 May, 2018 8 commits
-
-
Colin Ian King authored
Trivial fix to spelling mistake in module parameter description text [mkp: applied by hand] Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in module parameter description text [mkp: applied by hand] Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in module description text Signed-off-by:
-
Colin Ian King authored
The sanity check on u->in_connection_align_insertion_frequency is being performed twice and hence the first check can be removed since it is redundant. Cleans up cppcheck warning: drivers/scsi/ibmvscsi/ibmvscsi.c:1711: (warning) Identical inner 'if' condition is always true. Signed-off-by:
-
YueHaibing authored
Remove boilerplate code by using macro module_pci_driver. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
YueHaibing authored
Remove boilerplate code by using macro module_pci_driver. Signed-off-by:
-
YueHaibing authored
Remove boilerplate code by using macro module_pci_driver. Signed-off-by:
-
Christoph Hellwig authored
All three instance of ->smp_handler deal with highmem backed requests just fine. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
- 20 Apr, 2018 16 commits
-
-
Arnd Bergmann authored
do_gettimeofday() is deprecated since it will stop working in 2038 on 32-bit platforms, leading to incorrect times passed to the firmware. On 64-bit platforms the current code appears to be fine, as the calculation passes an 8-bit century number into the firmware that can represent times long in the future (possibly until 25599). Using ktime_get_real_seconds() to get a 64-bit seconds value and time64_to_tm() to convert it into the firmware format greatly simplifies the ips timekeeping code, makes 32-bit and 64-bit behave the same way here, and gets us closer to removing the deprecated interfaces. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
do_gettimeofday() is deprecated because of the y2038 overflow. Here, we use the result to pass into a 32-bit field in the firmware, which still risks an overflow, but if the firmware is written to expect unsigned values, it can at least last until y2106, and there is not much we can do about it. This changes do_gettimeofday() to ktime_get_real_seconds(), which at least simplifies the code a bit, and avoids the deprecated interface. I'm adding a comment about the overflow to document what happens. Signed-off-by:
-
YueHaibing authored
Remove boilerplate code by using macro module_pci_driver. Signed-off-by:
-
Randy Dunlap authored
Add a driver-api document for target/iSCSI interfaces. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> To: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: linux-scsi@vger.kernel.org Cc: target-devel@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
Randy Dunlap authored
Make documentation on target-supported userspace-I/O design be usable by kernel-doc by using "DOC:". This is used in the driver-api Documentation chapter. Signed-off-by:
-
Randy Dunlap authored
For exported functions that already have near-kernel-doc notation, fix them to begin with "/**" and make a few corrections so that they don't have any kernel-doc warnings. Signed-off-by:
-
Randy Dunlap authored
Correct a function parameter's name to eliminate kernel-doc warnings in drivers/target/target_core_transport.c. Fixes these kernel-doc warnings: (tested by adding these files to a new target.rst documentation file) ../drivers/target/target_core_transport.c:1671: warning: No description found for parameter 'fabric_tmr_ptr' ../drivers/target/target_core_transport.c:1671: warning: Excess function parameter 'fabric_context' description in 'target_submit_tmr' Signed-off-by:
-
Jia-Ju Bai authored
new_tape_buffer() is never called in atomic context. new_tape_buffer() is only called by st_probe(), which is only set as ".probe" in struct scsi_driver. Despite never getting called from atomic context, new_tape_buffer() calls kzalloc() with GFP_ATOMIC, which does not sleep for allocation. GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL, which can sleep and improve the possibility of sucessful allocation. This is found by a static analysis tool named DCNS written by myself. And I also manually check it. Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by:
-
Jia-Ju Bai authored
st_probe() is never called in atomic context. st_probe() is only set as ".probe" in struct scsi_driver. Despite never getting called from atomic context, st_probe() calls kzalloc() with GFP_ATOMIC, which does not sleep for allocation. GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL, which can sleep and improve the possibility of sucessful allocation. This is found by a static analysis tool named DCNS written by myself. And I also manually check it. Signed-off-by:
-
Martin Wilck authored
On Fujitsu ETERNUS systems, sense code ABORTED COMMAND with ASC/Q C1/01 is used to indicate temporary condition where the storage-internal path to a target is switched from one controller to another. SCSI commands that return with this error code must be retried unconditionally (i.e. without the "maybe_retry" logic in scsi_decide_disposition); otherwise dm-multipath might initiate a failover from a healthy path e.g. for REQ_FAILFAST_DEV commands. Introduce a new blist flag for this case. [mkp: applied by hand] Signed-off-by:
Martin Wilck <mwilck@suse.com> Signed-off-by:
-
Martin Wilck authored
EMC Symmetrix returns 'internal target error' for a variety of conditions, most of which will be transient. So we should always retry it, even with failfast set. Otherwise we'd get spurious path flaps with multipath. Signed-off-by:
-
Martin Wilck authored
Warn if a device (or the user) sets blist flags which are unknown or have been removed. This should enable us to reuse freed blist bits in later releases. Signed-off-by:
-
Martin Wilck authored
Space for SCSI blist flags is gradually running out. Change the type to __u64 and fix a checkpatch complaint about symbolic mode flags in scsi_devinfo.c. Make checkpatch happy by replacing simple_strtoul() with kstrtoull(). Signed-off-by:
-
Martin Wilck authored
Use the just introduced const_ilog2() macro to avoid sparse errors. Signed-off-by:
-
Martin Wilck authored
Sparse emits errors about ilog2() in array indices because of the use of __ilog2_32() and __ilog2_64(), rightly so (https://www.spinics.net/lists/linux-sparse/msg03471.html). Create a const_ilog2() variant that works with sparse for this scenario. (Note: checkpatch.pl complains about missing parentheses, but that appears to be a false positive. I can get rid of the warning simply by inserting whitespace, making checkpatch "see" the whole macro). Signed-off-by:
-
Long Li authored
This is a best effort for estimating on how busy the ring buffer is for that channel, based on available buffer to write in percentage. It is still possible that at the time of actual ring buffer write, the space may not be available due to other processes may be writing at the time. Selecting a channel based on how full it is can reduce the possibility that a ring buffer write will fail, and avoid the situation a channel is over busy. Now it's possible that storvsc can use a smaller ring buffer size (e.g. 40k bytes) to take advantage of cache locality. Signed-off-by:
Long Li <longli@microsoft.com> Reviewed-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
-
- 19 Apr, 2018 6 commits
-
-
Souptick Joarder authored
Use new return type vm_fault_t for fault handler in struct vm_operations_struct. Signed-off-by:
Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by:
Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by:
-
Lee Duncan authored
The target database root directory, dbroot, has defaulted to /var/target for a while, but its main client, targetcli-fb, has been moving it to /etc/target for quite some time. With the plethora of target drivers now appearing, it has become more difficult to initialize this attribute before use by any child drivers. If the directory /etc/target exists, use that as the DB root. Otherwise, fall back to using /var/target. The ability to override this dbroot attribute still exists via sysfs. Signed-off-by:
Lee Duncan <lduncan@suse.com> Reviewed-by:
-
Colin Ian King authored
Rename macros MPI_FCPORTPAGE0_SUPPORT_SPEED_UKNOWN and MPI_FCPORTPAGE0_CURRENT_SPEED_UKNOWN to add in missing N in UNKNOWN Signed-off-by:
-
Bart Van Assche authored
scsi_io_completion() translates the sense key ILLEGAL REQUEST / ASC 0x21 into ACTION_FAIL. That means that setting cmd->allowed to zero in sd_zbc_complete() for this sense code / ASC combination is not necessary. Hence remove the code that resets cmd->allowed from sd_zbc_complete(). Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Reviewed-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
-
Bart Van Assche authored
This patch does not change any functionality but makes it clear that it is on purpose that these fields are 32 bits wide. Signed-off-by:
-
Christoph Hellwig authored
The default already is to never bounce, so the call is a no-op. Signed-off-by:
-
