There is no real point in allocating dedicated memory for the irqs array.
MAXFLOW is only 2, so it is easier to allocated the needed space
directly within the 'meson_dev' structure.

This saves some memory allocation and avoids an indirection when using the
irqs array.

Fixes: 48fe583f ("crypto: amlogic - Add crypto accelerator...")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The value of reqsize cannot be determined in case of fallbacks.
Therefore it must be stored in the tfm and not the alg object.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The value of reqsize must only be changed through the helper.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The value of reqsize cannot be determined in case of fallbacks.
Therefore it must be stored in the tfm and not the alg object.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The value of reqsize must only be changed through the helper.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The value of reqsize must only be changed through the helper.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The value of reqsize must only be changed through the helper.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The value of reqsize must only be changed through the helper.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The value of reqsize should only be changed through a helper.
To do so we need to first add a helper for this.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

release_firmware() checks whether firmware pointer is NULL. Remove the redundant NULL check in release_tar_archive().
Signed-off-by: Yushan Zhou <katrinzhou@tencent.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The value of reqsize must only be changed through the helper.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

If CAAM is not in "trusted" or "secure" state, a fixed non-volatile key
is used instead of the unique device key. This is the default mode of
operation without secure boot (HAB). In this scenario, CAAM encrypted
blobs should be used only for testing but not in a production
environment, so issue a warning.
Signed-off-by: Nikolaus Voss <nikolaus.voss@haag-streit.com>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fix to return a negative error code -EINVAL instead of 0.

Fixes: 0cec19c7 ("crypto: qat - add support for compression for 4xxx")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The U2F zero apparently has a real TRNG in it with maximum quality, not
one with quality of "1", which was likely a misinterpretation of the
field as a boolean. So remove the assignment entirely, so that we get
the default quality setting.

In the u2f-zero firmware, the 0x21 RNG command used by this driver is
handled as such [1]:

  case U2F_CUSTOM_GET_RNG:
    if (atecc_send_recv(ATECC_CMD_RNG,ATECC_RNG_P1,ATECC_RNG_P2,
      NULL, 0,
      appdata.tmp,
      sizeof(appdata.tmp), &res) == 0 )
    {
      memmove(msg->pkt.init.payload, res.buf, 32);
      U2FHID_SET_LEN(msg, 32);
      usb_write((uint8_t*)msg, 64);
    }
    else
    {
      U2FHID_SET_LEN(msg, 0);
      usb_write((uint8_t*)msg, 64);
    }

This same call to `atecc_send_recv(ATECC_CMD_RNG,ATECC_RNG_P1,
ATECC_RNG_P2,...)` is then also used in the token's cryptographically
critical "u2f_new_keypair" function, as its rather straightforward
source of random bytes [2]:

  int8_t u2f_new_keypair(uint8_t * handle, uint8_t * appid, uint8_t * pubkey)
  {
    struct atecc_response res;
    uint8_t private_key[36];
    int i;

    watchdog();

    if (atecc_send_recv(ATECC_CMD_RNG,ATECC_RNG_P1,ATECC_RNG_P2,
      NULL, 0,
      appdata.tmp,
      sizeof(appdata.tmp), &res) != 0 )
    {
      return -1;
    }

So it seems rather plain that the ATECC RNG is considered to provide
good random numbers.

[1] https://github.com/conorpp/u2f-zero/blob/master/firmware/src/custom.c
[2] https://github.com/conorpp/u2f-zero/blob/master/firmware/src/u2f_atecc.c

Cc: Andrej Shadura <andrew.shadura@collabora.co.uk>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In function 'hisi_qm_resume', if the device fails to be started,
directly returning error code will cause the device to be unavailable.
However, the failure may be caused by device error, which will be
reported to the driver, and driver can reset and restart device.
Therefore, check device status instead of returning error code
directly. Returns 0 if device error has occurred, otherwise returns
error code.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

'QM_XEQ_DEPTH_CAP' mask value is GENMASK(31, 0) instead of GENMASK(15, 0).
If the mask value is incorrect, will cause abnormal events cannot be
handled. So fix it.

Fixes: 129a9f34 ("crypto: hisilicon/qm - get qp num and depth from hardware registers")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This reverts commit 22ca9f4a because CFI
no longer breaks cross-module function address equality, so
crypto_shash_alg_has_setkey() can now be an inline function like before.

This commit should not be backported to kernels that don't have the new
CFI implementation.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The arm architecture doesn't support CFI yet, and even if it did, the
new CFI implementation supports indirect calls to assembly functions.
Therefore, there's no need to use a wrapper function for nh_neon().
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

sm3_neon_transform() is called via indirect function calls.  Therefore
it needs to use SYM_TYPED_FUNC_START instead of SYM_FUNC_START to cause
its type hash to be emitted when the kernel is built with
CONFIG_CFI_CLANG=y.  Otherwise, the code crashes with a CFI failure (if
the compiler didn't happen to optimize out the indirect call).

Fixes: c50d3285 ("arm64: Add types to indirect called assembly functions")
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Since the CFI implementation now supports indirect calls to assembly
functions, take advantage of that rather than use a wrapper function.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

sm4_aesni_avx_ctr_enc_blk8(), sm4_aesni_avx_cbc_dec_blk8(),
sm4_aesni_avx_cfb_dec_blk8(), sm4_aesni_avx2_ctr_enc_blk16(),
sm4_aesni_avx2_cbc_dec_blk16(), and sm4_aesni_avx2_cfb_dec_blk16() are
called via indirect function calls.  Therefore they need to use
SYM_TYPED_FUNC_START instead of SYM_FUNC_START to cause their type
hashes to be emitted when the kernel is built with CONFIG_CFI_CLANG=y.
Otherwise, the code crashes with a CFI failure.

(Or at least that should be the case.  For some reason the CFI checks in
sm4_avx_cbc_decrypt(), sm4_avx_cfb_decrypt(), and sm4_avx_ctr_crypt()
are not always being generated, using current tip-of-tree clang.
Anyway, this patch is a good idea anyway.)

Fixes: ccace936 ("x86: Add types to indirectly called assembly functions")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

sm3_transform_avx() is called via indirect function calls.  Therefore it
needs to use SYM_TYPED_FUNC_START instead of SYM_FUNC_START to cause its
type hash to be emitted when the kernel is built with
CONFIG_CFI_CLANG=y.  Otherwise, the code crashes with a CFI failure (if
the compiler didn't happen to optimize out the indirect call).

Fixes: ccace936 ("x86: Add types to indirectly called assembly functions")
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

sha512_transform_ssse3(), sha512_transform_avx(), and
sha512_transform_rorx() are called via indirect function calls.
Therefore they need to use SYM_TYPED_FUNC_START instead of
SYM_FUNC_START to cause their type hashes to be emitted when the kernel
is built with CONFIG_CFI_CLANG=y.  Otherwise, the code crashes with a
CFI failure (if the compiler didn't happen to optimize out the indirect
calls).

Fixes: ccace936 ("x86: Add types to indirectly called assembly functions")
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

sha256_transform_ssse3(), sha256_transform_avx(),
sha256_transform_rorx(), and sha256_ni_transform() are called via
indirect function calls.  Therefore they need to use
SYM_TYPED_FUNC_START instead of SYM_FUNC_START to cause their type
hashes to be emitted when the kernel is built with CONFIG_CFI_CLANG=y.
Otherwise, the code crashes with a CFI failure (if the compiler didn't
happen to optimize out the indirect calls).

Fixes: ccace936 ("x86: Add types to indirectly called assembly functions")
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

sha1_transform_ssse3(), sha1_transform_avx(), and sha1_ni_transform()
(but not sha1_transform_avx2()) are called via indirect function calls.
Therefore they need to use SYM_TYPED_FUNC_START instead of
SYM_FUNC_START to cause their type hashes to be emitted when the kernel
is built with CONFIG_CFI_CLANG=y.  Otherwise, the code crashes with a
CFI failure (if the compiler didn't happen to optimize out the indirect
calls).

Fixes: ccace936 ("x86: Add types to indirectly called assembly functions")
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Since the CFI implementation now supports indirect calls to assembly
functions, take advantage of that rather than use wrapper functions.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

aria_aesni_avx_encrypt_16way(), aria_aesni_avx_decrypt_16way(),
aria_aesni_avx_ctr_crypt_16way(), aria_aesni_avx_gfni_encrypt_16way(),
aria_aesni_avx_gfni_decrypt_16way(), and
aria_aesni_avx_gfni_ctr_crypt_16way() are called via indirect function
calls.  Therefore they need to use SYM_TYPED_FUNC_START instead of
SYM_FUNC_START to cause their type hashes to be emitted when the kernel
is built with CONFIG_CFI_CLANG=y.  Otherwise, the code crashes with a
CFI failure.

Fixes: ccace936 ("x86: Add types to indirectly called assembly functions")
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Cc: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto_aegis128_aesni_enc(), crypto_aegis128_aesni_enc_tail(),
crypto_aegis128_aesni_dec(), and crypto_aegis128_aesni_dec_tail() are
called via indirect function calls.  Therefore they need to use
SYM_TYPED_FUNC_START instead of SYM_FUNC_START to cause their type
hashes to be emitted when the kernel is built with CONFIG_CFI_CLANG=y.
Otherwise, the code crashes with a CFI failure (if the compiler didn't
happen to optimize out the indirect calls).

Fixes: ccace936 ("x86: Add types to indirectly called assembly functions")
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

list_for_each_entry_reverse() assumes that the iterated list is nonempty
and that every list_head is embedded in the same type, but its use in
padata_do_serial() breaks both rules.

This doesn't cause any issues now because padata_priv and padata_list
happen to have their list fields at the same offset, but we really
shouldn't be relying on that.

Fixes: bfde23ce ("padata: unbind parallel jobs from specific CPUs")
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

A deadlock can happen when an overloaded system runs ->parallel() in the
context of the current task:

    padata_do_parallel
      ->parallel()
        pcrypt_aead_enc/dec
          padata_do_serial
            spin_lock(&reorder->lock) // BHs still enabled
              <interrupt>
                ...
                  __do_softirq
                    ...
                      padata_do_serial
                        spin_lock(&reorder->lock)

It's a bug for BHs to be on in _do_serial as Steffen points out, so
ensure they're off in the "current task" case like they are in
padata_parallel_worker to avoid this situation.

Reported-by: syzbot+bc05445bc14148d51915@syzkaller.appspotmail.com
Fixes: 4611ce22 ("padata: allocate work structures for parallel jobs from a pool")
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In the past, the data for mb-skcipher test has been allocated
twice, that means the first allcated memory area is without
free, which may cause a potential memory leakage. So this
patch is to remove one allocation to fix this error.

Fixes: e161c593 ("crypto: tcrypt - add multibuf skcipher...")
Signed-off-by: Zhang Yiqun <zhangyiqun@phytium.com.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

When CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is set, the code in algboss.c
that handles CRYPTO_MSG_ALG_REGISTER is unnecessary, so make it be
compiled out.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Make the kdf_sp800108 self-test only print a message on success when
fips_enabled, so that it's consistent with testmgr.c and doesn't spam
the kernel log with a message that isn't really important.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Make kdf_sp800108 honor the CONFIG_CRYPTO_MANAGER_DISABLE_TESTS kconfig
option, so that it doesn't always waste time running its self-test.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The crypto_boot_test_finished static key is unnecessary when self-tests
are disabled in the kconfig, so optimize it out accordingly, along with
the entirety of crypto_start_tests().  This mainly avoids the overhead
of an unnecessary static_branch_enable() on every boot.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Since algboss always skips testing of algorithms with the
CRYPTO_ALG_INTERNAL flag, there is no need to go through the dance of
creating the test kthread, which creates a lot of overhead.  Instead, we
can just directly finish the algorithm registration, like is now done
when self-tests are disabled entirely.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Currently, registering an algorithm with the crypto API always causes a
notification to be posted to the "cryptomgr", which then creates a
kthread to self-test the algorithm.  However, if self-tests are disabled
in the kconfig (as is the default option), then this kthread just
notifies waiters that the algorithm has been tested, then exits.

This causes a significant amount of overhead, especially in the kthread
creation and destruction, which is not necessary at all.  For example,
in a quick test I found that booting a "minimum" x86_64 kernel with all
the crypto options enabled (except for the self-tests) takes about 400ms
until PID 1 can start.  Of that, a full 13ms is spent just doing this
pointless dance, involving a kthread being created, run, and destroyed
over 200 times.  That's over 3% of the entire kernel start time.

Fix this by just skipping the creation of the test larval and the
posting of the registration notification entirely, when self-tests are
disabled.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Merge branch 'i2c/client_device_id_helper-immutable' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Merge i2c tree to pick up i2c_client_get_device_id helper.