- 28 Apr, 2022 34 commits
-
-
Philip Yang authored
Otherwise userspace resubmit the BOs again will trigger kernel WARNING and fail the command submission. Signed-off-by:
Philip Yang <Philip.Yang@amd.com> Tested-by:
Robert Święcki <robert@swiecki.net> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Candice Li authored
Remove the redundant codes to fix build warning when CONFIG_DEBUG_FS is disabled. Reported-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Candice Li <candice.li@amd.com> Reviewed-by:
Yang Wang <kevinyang.wang@amd.com> Signed-off-by:
-
Stanley.Yang authored
This adds soc21 common ip block support Changed from v1: Switch WREG32/RREG32_PCIE to use indirect reg access helper for sco15 and onwards Acked-by:
Stanley.Yang <Stanley.Yang@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Stanley.Yang authored
add new write field macro to handle soc21 registers with reg prefix Acked-by:
-
Hawking Zhang authored
Add nbio callback func used to query rom offset. Used to query the rom offset for fetching the vbios. Acked-by:
Lijo Lazar <lijo.lazar@amd.com> Signed-off-by:
-
Hawking Zhang authored
Add gc v11_0_0 register offset and shift masks header files (Hawking) Acked-by:
Likun Gao <Likun.Gao@amd.com> Reviewed-by:
-
Hawking Zhang authored
Add mp v13_0_0 register offset and shift masks header files (Hawking) Acked-by:
-
Hawking Zhang authored
Handle atom_gfx_info_v3_0 structure. Signed-off-by:
-
Hawking Zhang authored
Handle newer gc info tables. Signed-off-by:
-
Hawking Zhang authored
atomfirmware table used for newer gfx IPs. Signed-off-by:
-
Hawking Zhang authored
vram_info table provides various vram information including vram_vendor, vram_type, vram_width, etc. v2: correct the calculation of vram_width Signed-off-by:
-
Hawking Zhang authored
To support query vram_width, vram_type, vram_vendor information Signed-off-by:
-
Hawking Zhang authored
Some initial settings now are not available from the atom data table. The assumption that !ps[0] || !ps[1] in amdgpu_atom_asic_init is not valid. In addition, driver needs to strictly follow atomfirmware structure (asic_init_parameters) to initialize parameters used to execute asic_init function, otherwise, the execution of asic_init would fail. This shall be applicable to all soc15 adapters,but let make the transition on soc21 first. Signed-off-by:
-
Hawking Zhang authored
Add helper function to execute atomfirmware asic_init from the cmd table Signed-off-by:
-
Alex Deucher authored
This data has no dependencies, so encapsulate it all within amdgpu_discovery.c. Acked-by:
-
Alex Deucher authored
To get the codec disable fuse mask. Acked-by:
-
Alex Deucher authored
Check the table signatures and checksums and verify that the tables exist before accessing them. v2: disable MALL table for now Acked-by:
-
Alex Deucher authored
Add a function to fetch the mall size from the IP discovery table. Properly handle harvest configurations where more or less cache may be available. Acked-by:
-
Alex Deucher authored
Check the harvesting table to determing if any UMC blocks have been harvested. Acked-by:
-
Alex Deucher authored
For chips with IP discovery get this from the table, hardcode it for older asics. Acked-by:
-
Alex Deucher authored
This will be useful in future patches. Acked-by:
-
Alex Deucher authored
The table is in little endian format. Acked-by:
-
Guchun Chen authored
Disable runtime power management on several sienna cichlid cards, otherwise SMU will possibly fail to be resumed from runtime suspend. Will drop this after a clean solution between kernel driver and SMU FW is available. amdgpu 0000:63:00.0: amdgpu: GECC is enabled amdgpu 0000:63:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available amdgpu 0000:63:00.0: amdgpu: SMU is resuming... amdgpu 0000:63:00.0: amdgpu: SMU: I'm not done with your command: SMN_C2PMSG_66:0x0000000E SMN_C2PMSG_82:0x00000080 amdgpu 0000:63:00.0: amdgpu: Failed to SetDriverDramAddr! amdgpu 0000:63:00.0: amdgpu: Failed to setup smc hw! [drm:amdgpu_device_ip_resume_phase2 [amdgpu]] *ERROR* resume of IP block <smu> failed -62 amdgpu 0000:63:00.0: amdgpu: amdgpu_device_ip_resume failed (-62) v2: seperate to a function. Signed-off-by:
Guchun Chen <guchun.chen@amd.com> Reviewed-by:
Evan Quan <evan.quan@amd.com> Signed-off-by:
-
Alex Deucher authored
From the GC info table to the gfx config structure in the driver. The driver will use this data to configure the card correctly. Acked-by:
-
Alex Deucher authored
Add new tables. Acked-by:
-
Likun Gao authored
Add function to decode IP version. Signed-off-by:
-
Likun Gao authored
Extend HWIP MAX INSTANCE to 11. Acked-by:
-
Marek Marczykowski-Górecki authored
While technically Xen dom0 is a virtual machine too, it does have access to most of the hardware so it doesn't need to be considered a "passthrough". Commit b818a5d3 ("drm/amdgpu/gmc: use PCI BARs for APUs in passthrough") changed how FB is accessed based on passthrough mode. This breaks amdgpu in Xen dom0 with message like this: [drm:dc_dmub_srv_wait_idle [amdgpu]] *ERROR* Error waiting for DMUB idle: status=3 While the reason for this failure is unclear, the passthrough mode is not really necessary in Xen dom0 anyway. So, to unbreak booting affected kernels, disable passthrough mode in this case. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1985 Fixes: b818a5d3 ("drm/amdgpu/gmc: use PCI BARs for APUs in passthrough") Signed-off-by:
Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by:
-
Evan Quan authored
Fix the compile warning below: drivers/gpu/drm/amd/amdgpu/../pm/legacy-dpm/kv_dpm.c:1641 kv_get_acp_boot_level() warn: always true condition '(table->entries[i]->clk >= 0) => (0-u32max >= 0)' Reported-by:
kernel test robot <lkp@intel.com> CC: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Mukul Joshi authored
[ 168.544078] ====================================================== [ 168.550309] WARNING: possible circular locking dependency detected [ 168.556523] 5.16.0-kfd-fkuehlin #148 Tainted: G E [ 168.562558] ------------------------------------------------------ [ 168.568764] kfdtest/3479 is trying to acquire lock: [ 168.573672] ffffffffc0927a70 (&topology_lock){++++}-{3:3}, at: kfd_topology_device_by_id+0x16/0x60 [amdgpu] [ 168.583663] but task is already holding lock: [ 168.589529] ffff97d303dee668 (&mm->mmap_lock#2){++++}-{3:3}, at: vm_mmap_pgoff+0xa9/0x180 [ 168.597755] which lock already depends on the new lock. [ 168.605970] the existing dependency chain (in reverse order) is: [ 168.613487] -> #3 (&mm->mmap_lock#2){++++}-{3:3}: [ 168.619700] lock_acquire+0xca/0x2e0 [ 168.623814] down_read+0x3e/0x140 [ 168.627676] do_user_addr_fault+0x40d/0x690 [ 168.632399] exc_page_fault+0x6f/0x270 [ 168.636692] asm_exc_page_fault+0x1e/0x30 [ 168.641249] filldir64+0xc8/0x1e0 [ 168.645115] call_filldir+0x7c/0x110 [ 168.649238] ext4_readdir+0x58e/0x940 [ 168.653442] iterate_dir+0x16a/0x1b0 [ 168.657558] __x64_sys_getdents64+0x83/0x140 [ 168.662375] do_syscall_64+0x35/0x80 [ 168.666492] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 168.672095] -> #2 (&type->i_mutex_dir_key#6){++++}-{3:3}: [ 168.679008] lock_acquire+0xca/0x2e0 [ 168.683122] down_read+0x3e/0x140 [ 168.686982] path_openat+0x5b2/0xa50 [ 168.691095] do_file_open_root+0xfc/0x190 [ 168.695652] file_open_root+0xd8/0x1b0 [ 168.702010] kernel_read_file_from_path_initns+0xc4/0x140 [ 168.709542] _request_firmware+0x2e9/0x5e0 [ 168.715741] request_firmware+0x32/0x50 [ 168.721667] amdgpu_cgs_get_firmware_info+0x370/0xdd0 [amdgpu] [ 168.730060] smu7_upload_smu_firmware_image+0x53/0x190 [amdgpu] [ 168.738414] fiji_start_smu+0xcf/0x4e0 [amdgpu] [ 168.745539] pp_dpm_load_fw+0x21/0x30 [amdgpu] [ 168.752503] amdgpu_pm_load_smu_firmware+0x4b/0x80 [amdgpu] [ 168.760698] amdgpu_device_fw_loading+0xb8/0x140 [amdgpu] [ 168.768412] amdgpu_device_init.cold+0xdf6/0x1716 [amdgpu] [ 168.776285] amdgpu_driver_load_kms+0x15/0x120 [amdgpu] [ 168.784034] amdgpu_pci_probe+0x19b/0x3a0 [amdgpu] [ 168.791161] local_pci_probe+0x40/0x80 [ 168.797027] work_for_cpu_fn+0x10/0x20 [ 168.802839] process_one_work+0x273/0x5b0 [ 168.808903] worker_thread+0x20f/0x3d0 [ 168.814700] kthread+0x176/0x1a0 [ 168.819968] ret_from_fork+0x1f/0x30 [ 168.825563] -> #1 (&adev->pm.mutex){+.+.}-{3:3}: [ 168.834721] lock_acquire+0xca/0x2e0 [ 168.840364] __mutex_lock+0xa2/0x930 [ 168.846020] amdgpu_dpm_get_mclk+0x37/0x60 [amdgpu] [ 168.853257] amdgpu_amdkfd_get_local_mem_info+0xba/0xe0 [amdgpu] [ 168.861547] kfd_create_vcrat_image_gpu+0x1b1/0xbb0 [amdgpu] [ 168.869478] kfd_create_crat_image_virtual+0x447/0x510 [amdgpu] [ 168.877884] kfd_topology_add_device+0x5c8/0x6f0 [amdgpu] [ 168.885556] kgd2kfd_device_init.cold+0x385/0x4c5 [amdgpu] [ 168.893347] amdgpu_amdkfd_device_init+0x138/0x180 [amdgpu] [ 168.901177] amdgpu_device_init.cold+0x141b/0x1716 [amdgpu] [ 168.909025] amdgpu_driver_load_kms+0x15/0x120 [amdgpu] [ 168.916458] amdgpu_pci_probe+0x19b/0x3a0 [amdgpu] [ 168.923442] local_pci_probe+0x40/0x80 [ 168.929249] work_for_cpu_fn+0x10/0x20 [ 168.935008] process_one_work+0x273/0x5b0 [ 168.940944] worker_thread+0x20f/0x3d0 [ 168.946623] kthread+0x176/0x1a0 [ 168.951765] ret_from_fork+0x1f/0x30 [ 168.957277] -> #0 (&topology_lock){++++}-{3:3}: [ 168.965993] check_prev_add+0x8f/0xbf0 [ 168.971613] __lock_acquire+0x1299/0x1ca0 [ 168.977485] lock_acquire+0xca/0x2e0 [ 168.982877] down_read+0x3e/0x140 [ 168.987975] kfd_topology_device_by_id+0x16/0x60 [amdgpu] [ 168.995583] kfd_device_by_id+0xa/0x20 [amdgpu] [ 169.002180] kfd_mmap+0x95/0x200 [amdgpu] [ 169.008293] mmap_region+0x337/0x5a0 [ 169.013679] do_mmap+0x3aa/0x540 [ 169.018678] vm_mmap_pgoff+0xdc/0x180 [ 169.024095] ksys_mmap_pgoff+0x186/0x1f0 [ 169.029734] do_syscall_64+0x35/0x80 [ 169.035005] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 169.041754] other info that might help us debug this: [ 169.053276] Chain exists of: &topology_lock --> &type->i_mutex_dir_key#6 --> &mm->mmap_lock#2 [ 169.068389] Possible unsafe locking scenario: [ 169.076661] CPU0 CPU1 [ 169.082383] ---- ---- [ 169.088087] lock(&mm->mmap_lock#2); [ 169.092922] lock(&type->i_mutex_dir_key#6); [ 169.100975] lock(&mm->mmap_lock#2); [ 169.108320] lock(&topology_lock); [ 169.112957] *** DEADLOCK *** This commit fixes the deadlock warning by ensuring pm.mutex is not held while holding the topology lock. For this, kfd_local_mem_info is moved into the KFD dev struct and filled during device init. This cached value can then be used instead of querying the value again and again. Signed-off-by:Mukul Joshi <mukul.joshi@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Mukul Joshi authored
The logic to update the IO links when a KFD device is removed was not correct as it would miss updating the proximity domain values for some nodes where the node_from and node_to both were greater values than the proximity domain value of the KFD device being removed from topology. Fixes: 46d18d51 ("drm/amdkfd: Cleanup IO links during KFD device removal") Signed-off-by:
-
Christophe JAILLET authored
All uses of the 'kfd->gtt_sa_bitmap' bitmap are protected with the 'kfd->gtt_sa_lock' mutex. So: - prefer the non-atomic '__set_bit()' function - use the non-atomic 'bitmap_[set|clear]()' functions instead of equivalent 'for' loops. These functions can work on several bits at a time Signed-off-by:Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
-
Christophe JAILLET authored
'kfd->gtt_sa_bitmap' is a bitmap. So use 'bitmap_zalloc()' to simplify code, improve the semantic and avoid some open-coded arithmetic in allocator arguments. Also change the corresponding 'kfree()' into 'bitmap_free()' to keep consistency. Signed-off-by:
-
Melissa Wen authored
From [1], I realized two other calls to dcn30 code are associated with FPU operations and are not protected by DC_FP_* macros: * dcn30_populate_dml_writeback_from_context() * dcn30_set_mcif_arb_params() So, since FPU-associated code is not fully isolated in dcn30, and dcn3.1.x reuses them, let's wrap their calls properly. Note: this patch complements the fix from [1]. [1] https://lore.kernel.org/amd-gfx/20220329082957.1662655-1-chandan.vurdigerenataraj@amd.com/Reviewed-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
Melissa Wen <mwen@igalia.com> Signed-off-by:
-
- 26 Apr, 2022 6 commits
-
-
oushixiong authored
Signed-off-by:
oushixiong <oushixiong@kylinos.cn> Signed-off-by:
-
Rongguang Wei authored
Fix spelling mistake: "differnt" -> "different" "commond" -> "common" Signed-off-by:
Rongguang Wei <weirongguang@kylinos.cn> Signed-off-by:
-
Dan Carpenter authored
If the kzalloc() fails then this code will crash. Return -ENOMEM instead. Fixes: e50d9ba0 ("drm/amdgpu: Add debugfs TA load/unload/invoke support") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
There are two error code bugs here. The copy_to/from_user() functions return the number of bytes remaining (a positive number). We should return -EFAULT if the copy fails. Second if we fail because "context.resp_status" is non-zero then return -EINVAL instead of zero. Fixes: e50d9ba0 ("drm/amdgpu: Add debugfs TA load/unload/invoke support") Signed-off-by:
-
Zhenneng Li authored
Signed-off-by:
Zhenneng Li <lizhenneng@kylinos.cn> Signed-off-by:
-
David Zhang authored
[Why] Allow for PSR SMU optimization and PSR multiple display optimization. [How] Add feature flags of PSR smu optimization and PSR multiple display optimiztaion, and set them during init sequence. By default, flags are disabled. Signed-off-by:
David Zhang <dingchen.zhang@amd.com> Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Reviewed-by:
Roman Li <Roman.Li@amd.com> Signed-off-by:
-
