- 06 Apr, 2022 2 commits
-
-
Kalle Valo authored
While reviewing the mhi.c I noticed we were just ignoring the errors coming from MHI subsystem during suspend and resume. Add proper checks and warning messages. Also pass the error value to callers. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2 Signed-off-by:
Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220401173042.17467-3-kvalo@kernel.org
-
Kalle Valo authored
State machines are difficult to understand and in this case it's just useless, which is shown by the diffstat. So remove it entirely to make the code simpler. No functional changes. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2 Signed-off-by:
-
- 05 Apr, 2022 8 commits
-
-
Nagarajan Maran authored
In the "ath11k_wow_init", error value "EINVAL" is returned when the check for firmware support of WoW feature fails, which in turn stops the driver initialization. Warning message: [ 31.040144] ------------[ cut here ]------------ [ 31.040185] WARNING: CPU: 1 PID: 51 at drivers/net/wireless/ath/ath11k/wow.c:813 ath11k_wow_init+0xc8/0x13a8 [ath11k] [ 31.043846] Modules linked in: ath11k_pci ath11k qmi_helpers [ 31.054341] CPU: 1 PID: 51 Comm: kworker/u8:1 Tainted: G W 5.17.0-wt-ath-594817-ga7f6aa925cf8-dirty #17 [ 31.060078] Hardware name: Qualcomm Technologies, Inc. IPQ8074/AP-HK10-C2 (DT) [ 31.070578] Workqueue: ath11k_qmi_driver_event ath11k_qmi_driver_event_work [ath11k] [ 31.077782] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 31.085676] pc : ath11k_wow_init+0xc8/0x13a8 [ath11k] [ 31.092359] lr : ath11k_mac_register+0x548/0xb98 [ath11k] [ 31.097567] sp : ffff80000aa13c40 [ 31.102944] x29: ffff80000aa13c40 x28: ffff800009184390 x27: ffff000002959f20 [ 31.106251] x26: ffff000002828000 x25: ffff000002830000 x24: ffff000002830000 [ 31.113369] x23: ffff000002820000 x22: ffff00000282854c x21: 0000000000000000 [ 31.120487] x20: ffff00000295cf20 x19: ffff000002828540 x18: 0000000000000031 [ 31.127605] x17: 0000000000000004 x16: ffff0000028285fc x15: ffff00000295b040 [ 31.134723] x14: 0000000000000067 x13: ffff00000282859c x12: 000000000000000d [ 31.141840] x11: 0000000000000018 x10: 0000000000000004 x9 : 0000000000000000 [ 31.148959] x8 : ffff00000289d680 x7 : 0000000000000000 x6 : 000000000000003f [ 31.156077] x5 : 0000000000000040 x4 : 0000000000000000 x3 : ffff000002820968 [ 31.163196] x2 : 0000000000000080 x1 : 0080008af9981779 x0 : ffff000002959f20 [ 31.170314] Call trace: [ 31.177421] ath11k_wow_init+0xc8/0x13a8 [ath11k] [ 31.179684] ath11k_core_qmi_firmware_ready+0x430/0x5e0 [ath11k] [ 31.184548] ath11k_qmi_driver_event_work+0x16c/0x4f8 [ath11k] [ 31.190623] process_one_work+0x134/0x350 [ 31.196262] worker_thread+0x12c/0x450 [ 31.200340] kthread+0xf4/0x110 [ 31.203986] ret_from_fork+0x10/0x20 [ 31.207026] ---[ end trace 0000000000000000 ]--- [ 31.210894] ath11k_pci 0000:01:00.0: failed to init wow: -22 [ 31.215467] ath11k_pci 0000:01:00.0: failed register the radio with mac80211: -22 [ 31.221117] ath11k_pci 0000:01:00.0: failed to create pdev core: -22 Fix this by returning value "0" when FW doesn't support WoW to allow driver to proceed with initialize sequence and also remove the unnecessary "WARN_ON". Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Fixes: ba9177fc ("ath11k: Add basic WoW functionalities") Signed-off-by:
Nagarajan Maran <quic_nmaran@quicinc.com> Signed-off-by:
-
Baochen Qiang authored
The intended delay in ath11k_core_suspend is introduced in commit d1b0c338 ("ath11k: implement suspend for QCA6390 PCI devices"), now with ath11k_mac_wait_tx_complete added in commit ba9177fc ("ath11k: Add basic WoW functionalities"), that delay is not necessary now, so remove it. This is found in code review. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-02431-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by:
Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by:
-
Karthikeyan Kathirvel authored
The maximum number of SSIDs in a for active probe requests is currently reported as 16 (WLAN_SCAN_PARAMS_MAX_SSID) when registering the driver. The scan_req_params structure only has the capacity to hold 10 SSIDs. This leads to a buffer overflow which can be triggered from wpa_supplicant in userspace. When copying the SSIDs into the scan_req_params structure in the ath11k_mac_op_hw_scan route, it can overwrite the extraie pointer. Firmware supports 16 ssid * 4 bssid, for each ssid 4 bssid combo probe request will be sent, so totally 64 probe requests supported. So set both max ssid and bssid to 16 and 4 respectively. Remove the redundant macros of ssid and bssid. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01300-QCAHKSWPL_SILICONZ-1 Signed-off-by:
Karthikeyan Kathirvel <quic_kathirve@quicinc.com> Signed-off-by:
-
Manikanta Pubbisetty authored
Remove core PCI and ath11k PCI references(struct ath11k_pci) from PCI common code. Since, PCI common code will be used by hybrid bus devices, this code should be independent from ATH11K PCI references and Linux core PCI references like struct pci_dev. Since this change introduces function callbacks for bus wakeup and bus release operations, wakeup_mhi HW param is no longer needed and hence it is removed completely. Alternatively, bus wakeup/release ops for QCA9074 are initialized to NULL as QCA9704 does not need bus wakeup/release for register accesses. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1 Signed-off-by:
Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by:
-
Manikanta Pubbisetty authored
Refactor MSI logic in order to support hybrid bus devices like WCN6750. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
Manikanta Pubbisetty authored
Instead of selecting MSI config based on magic numbers, make the assignment based on HW revision. The logic is similar to the selection of HW params. This improves readability of the code and also simplifies new additions. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
Manikanta Pubbisetty authored
Unlike other ATH11K PCIe devices which are enumerated by APSS processor (Application Processor SubSystem), WCN6750 gets enumerated by the WPSS Q6 processor (Wireless Processor SubSystem); In simple terms, though WCN6750 is PCIe device, it is not attached to the APSS processor, APSS will not know of such a device being present in the system and therefore WCN6750 will be registered as a platform device to the kernel core like other supported AHB devices. WCN6750 needs both AHB and PCI APIs for it's operation, it uses AHB APIs for device probe/boot and PCI APIs for device setup and register accesses. Because of this nature, it is referred as a hybrid bus device. Refactor PCI code to support hybrid bus devices like WCN6750. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
Manikanta Pubbisetty authored
In order to add the support for WCN6750 in ATH11K , it is required to move certain PCI definitions to the header file. As a result, add ATH11K_PCI_* prefix to these definitions. Also, change the scope of certain PCI APIs that are required to enable WCN6750 from static to global. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
- 01 Apr, 2022 4 commits
-
-
Benjamin Stürz authored
Use macros to force strict ordering of the elements. Signed-off-by:
Benjamin Stürz <benni@stuerz.xyz> Reviewed-by:
Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by:
-
Wenli Looi authored
Replace a "mode" variable indicating "is 5ghz" with an "is2ghz" variable to make it consistent with other functions in the file. Signed-off-by:
Wenli Looi <wlooi@ucalgary.ca> Acked-by:
Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by:
-
Erik Stromdahl authored
commit cfee8793 ("ath10k: enable napi on RX path for sdio") introduced napi for SDIO and updated the htt interface for high latency devices. These changes breaks USB, so USB code must be updated to use napi as well in order to have a working RX path. Tested-on: QCA9377 hw1.0 USB 1.0.0.299 Signed-off-by:
Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by:
-
Erik Stromdahl authored
commit 93bbdec6683e1c8ba2cc4e6 ("ath10k: htt: support MSDU ids with SDIO") introduced MSDU ID allocation in the htt TX path for high latency devices. This feature needs to be enabled for USB as well in order to have a functional TX path. Tested-on: QCA9377 hw1.0 USB 1.0.0.299 Signed-off-by:
-
- 30 Mar, 2022 3 commits
-
-
Wen Gong authored
Currently ath11k will wait 11d scan complete while add interface in ath11k_mac_op_add_interface(), when system resume without enable wowlan, ath11k_mac_op_add_interface() is called for each resume, thus it increase the resume time of system. And ath11k_mac_op_hw_scan() after ath11k_mac_op_add_interface() also needs some time cost because the previous 11d scan need more than 5 seconds when 6 GHz is enabled, then the scan started event will indicated to ath11k after the 11d scan completed. While 11d scan/hw scan is running in firmware, if ath11k update channel list to firmware by WMI_SCAN_CHAN_LIST_CMDID, then firmware will cancel the current scan which is running, it lead the scan failed. The patch commit 9dcf6808 ("ath11k: add 11d scan offload support") used finish_11d_scan/finish_11d_ch_list/pending_11d to synchronize the 11d scan/hw scan/channel list between ath11k/firmware/mac80211 and to avoid the scan fail. Add wait operation before ath11k update channel list, function ath11k_reg_update_chan_list() will wait until the current 11d scan/hw scan completed. And remove the wait operation of start 11d scan and waiting channel list complete in hw scan. After these changes, resume time cost reduce about 5 seconds and also hw scan time cost reduced obviously, and scan failed not seen. The 11d scan is sent to firmware only one time for each interface added in mac.c, and it is moved after the 1st hw scan because 11d scan will cost some time and thus leads the AP scan result update to UI delay. Currently priority of ath11k's hw scan is WMI_SCAN_PRIORITY_LOW, and priority of 11d scan in firmware is WMI_SCAN_PRIORITY_MEDIUM, then the 11d scan which sent after hw scan will cancel the hw scan in firmware, so change the priority to WMI_SCAN_PRIORITY_MEDIUM for the hw scan which is in front of the 11d scan, thus it will not happen scan cancel in firmware. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Fixes: 9dcf6808 ("ath11k: add 11d scan offload support") Signed-off-by:
Wen Gong <quic_wgong@quicinc.com> Signed-off-by:
-
Wen Gong authored
Currently ath11k only download the same regdb.bin file for all WCN6855 chips, actually ath11k needs to distinguish all different WCN6855 chips. This is to re-use the string type which include bus, chip id, board id, vendor, device, subsystem-vendor, subsystem-device and variant for WCN6855 to distinguish different regdb in board-2.bin. ath11k will first load board-2.bin and search in it for the regdb data with the above parameters, if matched one regdb data, then download it to firmware, if not matched any one, then ath11k will download the file regdb.bin to firmware. Add enum value ATH11K_BD_IE_REGDB and enum type ath11k_bd_ie_regdb_type to distinguish regdb data and board data since they are in the same file board-2.bin. This only take effect for WCN6855 which supports regdb in hardware parameters. Test log: [ 3833.091948] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092072] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 205316 [ 3833.092079] ath11k_pci 0000:05:00.0: board name [ 3833.092083] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092088] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 -id=1 [ 3833.092091] ath11k_pci 0000:05:00.0: board name [ 3833.092095] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092099] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 -id=2 [ 3833.092102] ath11k_pci 0000:05:00.0: board name [ 3833.092105] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092109] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 -id=3 [ 3833.092112] ath11k_pci 0000:05:00.0: board name [ 3833.092116] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092119] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092123] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092126] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092130] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092133] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092137] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 2c 76 61 72 69 61 ard-id=266,varia [ 3833.092140] ath11k_pci 0000:05:00.0: 00000070: 6e 74 3d 48 50 5f 47 38 5f 4c 61 6e 63 69 61 31 nt=HP_G8_Lancia1 [ 3833.092144] ath11k_pci 0000:05:00.0: 00000080: 35 5 [ 3833.092147] ath11k_pci 0000:05:00.0: board name [ 3833.092150] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092154] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092157] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092161] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092165] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092168] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092172] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 ard-id=266 [ 3833.092206] ath11k_pci 0000:05:00.0: board name [ 3833.092209] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092213] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092216] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092220] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092223] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092227] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092230] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [ 3833.092234] ath11k_pci 0000:05:00.0: boot found match regdb data for name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092238] ath11k_pci 0000:05:00.0: board name [ 3833.092241] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092245] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 31 -id=11 [ 3833.092248] ath11k_pci 0000:05:00.0: board name [ 3833.092251] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092255] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 32 -id=22 [ 3833.092258] ath11k_pci 0000:05:00.0: board name [ 3833.092261] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092265] ath11k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 33 -id=33 [ 3833.092268] ath11k_pci 0000:05:00.0: boot found regdb data for 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092272] ath11k_pci 0000:05:00.0: fetched regdb Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by:
-
Edmond Gagnon authored
Currently, the driver reports a tx_rate of 6.0 MBit/s no matter the true rate: root@linaro-developer:~# iw wlan0 link Connected to 6c:f3:7f:eb:9b:92 (on wlan0) SSID: SQ-DEVICETEST freq: 5200 RX: 4141 bytes (32 packets) TX: 2082 bytes (15 packets) signal: -77 dBm rx bitrate: 135.0 MBit/s MCS 6 40MHz short GI tx bitrate: 6.0 MBit/s bss flags: short-slot-time dtim period: 1 beacon int: 100 This patch requests HAL_GLOBAL_CLASS_A_STATS_INFO via a hal_get_stats firmware message and reports it via ieee80211_ops::sta_statistics. root@linaro-developer:~# iw wlan0 link Connected to 6c:f3:7f:eb:73:b2 (on wlan0) SSID: SQ-DEVICETEST freq: 5700 RX: 26788094 bytes (19859 packets) TX: 1101376 bytes (12119 packets) signal: -75 dBm rx bitrate: 135.0 MBit/s MCS 6 40MHz short GI tx bitrate: 108.0 MBit/s VHT-MCS 5 40MHz VHT-NSS 1 bss flags: short-slot-time dtim period: 1 beacon int: 100 Tested on MSM8939 with WCN3680B running firmware CNSS-PR-2-0-1-2-c1-00083, and verified by sniffing frames over the air with Wireshark to ensure the MCS indices match. Signed-off-by:Edmond Gagnon <egagnon@squareup.com> Reviewed-by:
Benjamin Li <benl@squareup.com> Signed-off-by:
-
- 28 Mar, 2022 1 commit
-
-
Wen Gong authored
Currently ath11k does not send the country code to firmware after device recovery, as a result the regdomain info is reported from firmware by default. Regdomain info is important, so ath11k also need to restore it to the value which was used before recovery. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by:
-
- 25 Mar, 2022 9 commits
-
-
Wenli Looi authored
This removes some code duplication with le32_to_cpu. This may also be required for QCN550x support, to provide an abstraction over the underlying EEPROM format. Signed-off-by:
-
Wenli Looi authored
Similar to ar9003_hw_spur_mitigate_mrc_cck, simplify the code by using ar9003_get_spur_chan_ptr. This may also be required for QCN550x support, to provide an abstraction over the underlying EEPROM format. Signed-off-by:
-
Wenli Looi authored
The current implementation is reading the wrong eeprom type. Fixes: d8ec2e2a ("ath9k: Add an eeprom_ops callback for retrieving the eepmisc value") Signed-off-by:
-
Wenli Looi authored
Replace other constants with AR9300_MAX_CHAINS when appropriate. This change does not appear to affect the final binary. Signed-off-by:
-
Wenli Looi authored
This makes the code clearer since set11nRateFlags currently sets both the rate flags and chain sel. This may also be required for QCN550x support, where the rate flags and chain sel are in separate fields. This change does not appear to affect the final binary. Signed-off-by:
-
Wenli Looi authored
This makes the macros more consistent and removes hidden dependencies on ah for macros that take _ah as a parameter. This change does not appear to affect the final binary. Signed-off-by:
-
Karthikeyan Periyasamy authored
When more clients (128) are connected, the UL data traffic KPI measurement is low compared to single client. This issue is due to more CPU cycles spent on the peer lookup operation with more clients. So reduce the peer lookup operation by modifying the linear based lookup operation into the rhash based lookup operation. This improve the peak throughput measurement. Since this is a software algorithm change, it is applicable for all the platforms. TCP UL 128 Clients test case Observation (64bit system): Previous: ~550 Mbps Now : ~860 Mbps Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01067-QCAHKSWPL_SILICONZ-1 Signed-off-by:
Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by:
-
Wen Gong authored
This is to read variant from SMBIOS such as read from DT, the variant string will be used to one part of string which used to search board data from board-2.bin. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by:
-
Wen Gong authored
Sometimes it has a variant value which read from DT or SMBIOS by ath11k, and meanwhile it does not have the matched board name in board-2.bin, then it will failed at boot up phase. Add fallback board name which removed variant value and search again in board-2.bin when failed with variant and try to load the board data again to increase boot up success rate. dmesg log after this patch: [169547.248472] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262,variant=test' [169547.248565] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 180324 [169547.248568] ath11k_pci 0000:05:00.0: board name [169547.248570] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248571] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248572] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248574] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248575] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248576] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [169547.248577] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [169547.248578] ath11k_pci 0000:05:00.0: board name [169547.248579] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248581] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248582] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248583] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248584] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248585] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [169547.248587] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 ard-id=266 [169547.248588] ath11k_pci 0000:05:00.0: board name [169547.248589] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248590] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248591] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248592] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248594] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248595] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 31 38 2c 71 6d 69 2d 62 chip-id=18,qmi-b [169547.248596] ath11k_pci 0000:05:00.0: 00000060: 6f 61 72 64 2d 69 64 3d 32 36 36 oard-id=266 [169547.248597] ath11k_pci 0000:05:00.0: failed to fetch board data for bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262,variant=test from ath11k/WCN6855/hw2.0/board-2.bin [169547.248476] ath11k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [169547.248634] ath11k_pci 0000:05:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 180324 [169547.248636] ath11k_pci 0000:05:00.0: board name [169547.248637] ath11k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248638] ath11k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248639] ath11k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248641] ath11k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248642] ath11k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248643] ath11k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [169547.248645] ath11k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [169547.248646] ath11k_pci 0000:05:00.0: boot found match for name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [169547.248647] ath11k_pci 0000:05:00.0: boot found board data for 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [169547.248649] ath11k_pci 0000:05:00.0: using board api 2 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by:
-
- 23 Mar, 2022 8 commits
-
-
Baochen Qiang authored
In Qualcomm ARM platforms there is WL_EN pin and other power regulators which can be controlled at platform side to completely reset the chip. For most of x86 and other platforms, the chip is connected via PCIe M.2 interface, and there is no way to control WL_EN pin. Instead the host driver needs to reset the chip via PCIE_SOC_GLOBAL_RESET hardware register, just like ath11k does currently. But when using PCIE_SOC_GLOBAL_RESET there are some hardware registers which are not cleared/restored. To handle those cases we can enable PLATFORM_CAP_PCIE_GLOBAL_RESET QMI host capability to tell the firmware to do some platform specific operations after firmware download. This does not fix any known issues, but is recommended by the firmware team, so enable the capability on QCA6390 and WCN6855 PCI devices. It is currently unclear if this should be enabled also on QCN9074, so leave it disabled for now. On AHB devices this is not needed as they don't use PCIE_SOC_GLOBAL_RESET. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by:
Baochen Qiang <bqiang@codeaurora.org> Signed-off-by:
-
Wen Gong authored
When test device recovery with below command, it has warning in message as below. echo assert > /sys/kernel/debug/ath11k/wcn6855\ hw2.0/simulate_fw_crash echo assert > /sys/kernel/debug/ath11k/qca6390\ hw2.0/simulate_fw_crash warning message: [ 1965.642121] ath11k_pci 0000:06:00.0: simulating firmware assert crash [ 1968.471364] ieee80211 phy0: Hardware restart was requested [ 1968.511305] ------------[ cut here ]------------ [ 1968.511368] WARNING: CPU: 3 PID: 1546 at drivers/bus/mhi/core/pm.c:505 mhi_pm_disable_transition+0xb37/0xda0 [mhi] [ 1968.511443] Modules linked in: ath11k_pci ath11k mac80211 libarc4 cfg80211 qmi_helpers qrtr_mhi mhi qrtr nvme nvme_core [ 1968.511563] CPU: 3 PID: 1546 Comm: kworker/u17:0 Kdump: loaded Tainted: G W 5.17.0-rc3-wt-ath+ #579 [ 1968.511629] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0067.2021.0528.1339 05/28/2021 [ 1968.511704] Workqueue: mhi_hiprio_wq mhi_pm_st_worker [mhi] [ 1968.511787] RIP: 0010:mhi_pm_disable_transition+0xb37/0xda0 [mhi] [ 1968.511870] Code: a9 fe ff ff 4c 89 ff 44 89 04 24 e8 03 46 f6 e5 44 8b 04 24 41 83 f8 01 0f 84 21 fe ff ff e9 4c fd ff ff 0f 0b e9 af f8 ff ff <0f> 0b e9 5c f8 ff ff 48 89 df e8 da 9e ee e3 e9 12 fd ff ff 4c 89 [ 1968.511923] RSP: 0018:ffffc900024efbf0 EFLAGS: 00010286 [ 1968.511969] RAX: 00000000ffffffff RBX: ffff88811d241250 RCX: ffffffffc0176922 [ 1968.512014] RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffff888118a90a24 [ 1968.512059] RBP: ffff888118a90800 R08: 0000000000000000 R09: ffff888118a90a27 [ 1968.512102] R10: ffffed1023152144 R11: 0000000000000001 R12: ffff888118a908ac [ 1968.512229] R13: ffff888118a90928 R14: dffffc0000000000 R15: ffff888118a90a24 [ 1968.512310] FS: 0000000000000000(0000) GS:ffff888234200000(0000) knlGS:0000000000000000 [ 1968.512405] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1968.512493] CR2: 00007f5538f443a8 CR3: 000000016dc28001 CR4: 00000000003706e0 [ 1968.512587] Call Trace: [ 1968.512672] <TASK> [ 1968.512751] ? _raw_spin_unlock_irq+0x1f/0x40 [ 1968.512859] mhi_pm_st_worker+0x3ac/0x790 [mhi] [ 1968.512959] ? mhi_pm_mission_mode_transition.isra.0+0x7d0/0x7d0 [mhi] [ 1968.513063] process_one_work+0x86a/0x1400 [ 1968.513184] ? pwq_dec_nr_in_flight+0x230/0x230 [ 1968.513312] ? move_linked_works+0x125/0x290 [ 1968.513416] worker_thread+0x6db/0xf60 [ 1968.513536] ? process_one_work+0x1400/0x1400 [ 1968.513627] kthread+0x241/0x2d0 [ 1968.513733] ? kthread_complete_and_exit+0x20/0x20 [ 1968.513821] ret_from_fork+0x22/0x30 [ 1968.513924] </TASK> Reason is mhi_deassert_dev_wake() from mhi_device_put() is called but mhi_assert_dev_wake() from __mhi_device_get_sync() is not called in progress of recovery. Commit 8e055992 ("bus: mhi: core: Skip device wake in error or shutdown state") add check for the pm_state of mhi in __mhi_device_get_sync(), and the pm_state is not the normal state untill recovery is completed, so it leads the dev_wake is not 0 and above warning print in mhi_pm_disable_transition() while checking mhi_cntrl->dev_wake. Add check in ath11k_pci_write32()/ath11k_pci_read32() to skip call mhi_device_put() if mhi_device_get_sync() does not really do wake, then the warning gone. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2 Signed-off-by:
-
Wen Gong authored
Add hw-restart to directly restart wlan. Like UTF mode start it will restart hardware and download firmware again. Usage: 1. Run command: echo hw-restart > /sys/kernel/debug/ath11k/qca6390\ hw2.0/simulate_fw_crash echo hw-restart > /sys/kernel/debug/ath11k/wcn6855\ hw2.0/simulate_fw_crash 2. wlan will be restart and do recovery process and success. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2 Signed-off-by:
-
Wen Gong authored
ieee80211_reconfig() of mac80211 is the main function for recovery of each ieee80211_hw and ath11k, and ath11k_core_reconfigure_on_crash() is the main function for recovery of ath11k_base, it has more than one ieee80211_hw and ath11k for each ath11k_base, so it need to add synchronization between them, otherwise it has many issue. For example, when ath11k_core_reconfigure_on_crash() is not complete, mac80211 send a hw scan request to ath11k, it leads firmware crash, because firmware has not been initialized at that moment, firmware is only finished downloaded and loaded, it can not receive scan command. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2 Signed-off-by:
-
Wen Gong authored
Currently ath11k has device recovery logic, it is introduced by this patch "ath11k: Add support for subsystem recovery" which is upstream by https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=ath11k-bringup&id=3a7b4838b6f6f234239f263ef3dc02e612a083ad. The patch is for AHB devices such as IPQ8074, it has remote proc module which is used to download the firmware and boots the processor which firmware is running on. If firmware crashed, remote proc module will detect it and download and boot firmware again. Below command will trigger a firmware crash, and then user can test feature of device recovery. Test command: echo assert > /sys/kernel/debug/ath11k/qca6390\ hw2.0/simulate_fw_crash echo assert > /sys/kernel/debug/ath11k/wcn6855\ hw2.0/simulate_fw_crash Unfortunately, QCA6390 is PCIe bus, it does not have the remote proc module, it use mhi module to communicate between firmware and ath11k. So ath11k does not support device recovery for QCA6390 currently. This patch is to add the extra logic which is different for QCA6390. When firmware crashed, MHI_CB_EE_RDDM event will be indicate by firmware and then ath11k_mhi_op_status_cb which is the callback of mhi_controller will receive the MHI_CB_EE_RDDM event, then ath11k will start to do recovery process, ath11k_core_reset() calls ath11k_hif_power_down()/ath11k_hif_power_up(), then the mhi/ath11k will start to download and boot firmware. There are some logic to avoid deadloop recovery and two simultaneous recovery operations. And because it has muti-radios for the soc, so it add some logic in ath11k_mac_op_reconfig_complete() to make sure all radios has reconfig complete and then complete the device recovery. Also it add workqueue_aux, because ab->workqueue is used when receive ATH11K_QMI_EVENT_FW_READY in recovery process(queue_work(ab->workqueue, &ab->restart_work)), and ath11k_core_reset will wait for max ATH11K_RESET_TIMEOUT_HZ for the previous restart_work finished, if ath11k_core_reset also queued in ab->workqueue, then it will delay restart_work of previous recovery and lead previous recovery fail. ath11k recovery success for QCA6390/WCN6855 after apply this patch. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2 Signed-off-by:
-
Wen Gong authored
Currently it does not have regdb files for QCA6390, so disable its regdb support feature now. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-05266-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by:
-
Wen Gong authored
Currently ATH11K_BD_IE_BOARD_EXT is not used, so remove it. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by:
-
Niels Dossche authored
ath11k_peer_find_by_addr states via lockdep that ab->base_lock must be held when calling that function in order to protect the list. All callers except ath11k_mac_op_unassign_vif_chanctx have that lock acquired when calling ath11k_peer_find_by_addr. That lock is also not transitively held by a path towards ath11k_mac_op_unassign_vif_chanctx. The solution is to acquire the lock when calling ath11k_peer_find_by_addr inside ath11k_mac_op_unassign_vif_chanctx. I am currently working on a static analyser to detect missing locks and this was a reported case. I manually verified the report by looking at the code, but I do not have real hardware so this is compile tested only. Fixes: 701e48a4 ("ath11k: add packet log support for QCA6390") Signed-off-by:
Niels Dossche <dossche.niels@gmail.com> Signed-off-by:
-
- 21 Mar, 2022 4 commits
-
-
Hari Chandrakanthan authored
Currently fw build id is printed during init as follows. fw_version 0x250684a5 fw_build_timestamp 2021-07-13 10:57 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 The string "QC_IMAGE_VERSION_STRING=" is removed from the log to improve readability. With this patch the fw build id is printed during init as follows. fw_version 0x250684a5 fw_build_timestamp 2021-07-13 10:57 fw_build_id WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Signed-off-by:
Hari Chandrakanthan <quic_haric@quicinc.com> Signed-off-by:
-
Karthikeyan Periyasamy authored
Introduce new helper function for peer delete to reuse this logic in all peer cleanup procedures. Found this in code review. Also this change is applicable for all the platform. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01067-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
Meng Tang authored
Only the device data is needed, not the entire struct of_device_id. Use of_device_get_match_data() instead of of_match_device(). Signed-off-by:
Meng Tang <tangmeng@uniontech.com> Signed-off-by:
-
Youghandhar Chintala authored
Currently after the hardware restart triggered from the driver, the station interface connection remains intact, since a disconnect trigger is not sent to userspace. This can lead to a problem in targets where the wifi mac sequence is added by the firmware. After the target restart, its wifi mac sequence number gets reset to zero. Hence AP to which our device is connected will receive frames with a wifi mac sequence number jump to the past, thereby resulting in the AP dropping all these frames, until the frame arrives with a wifi mac sequence number which AP was expecting. To avoid such frame drops, its better to trigger a station disconnect upon target hardware restart which can be done with API ieee80211_reconfig_disconnect exposed to mac80211. The other targets are not affected by this change, since the hardware params flag is not set. Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1 Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1 Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00048 Signed-off-by:
Youghandhar Chintala <youghand@codeaurora.org> Signed-off-by:
-
- 18 Mar, 2022 1 commit
-
-
Julia Lawall authored
Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by:
Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by:
-
