- 13 Jun, 2024 8 commits
-
-
Ole André Vadla Ravnås authored
Available on iOS/iPadOS >= 17, where this new interface is used by developer tools using the new RemoteXPC protocol. This private interface lacks a status endpoint, presumably because there isn't a physical cable that can be unplugged, nor any speed changes to be notified about. Note that NCM interfaces are not exposed until a mode switch is requested, which macOS does automatically. The mode switch can be performed like this: uint8_t status; libusb_control_transfer(device_handle, LIBUSB_RECIPIENT_DEVICE | LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_ENDPOINT_IN, 82, /* bRequest */ 0, /* wValue */ 3, /* wIndex */ &status, sizeof(status), 0); Newer versions of usbmuxd do this automatically. Co-developed-by:Håvard Sørbø <havard@hsorbo.no> Signed-off-by:
Ole André Vadla Ravnås <oleavr@frida.re> Link: https://lore.kernel.org/r/20240607074117.31322-1-oleavr@frida.reSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Asbjørn Sloth Tønnesen says: ==================== net: flower: validate encapsulation control flags Now that all drivers properly rejects unsupported flower control flags used with FLOW_DISSECTOR_KEY_CONTROL, then time has come to add similar checks to the drivers supporting FLOW_DISSECTOR_KEY_ENC_CONTROL. There are currently just 4 drivers supporting this key, and 3 of those currently doesn't validate encapsulated control flags. Encapsulation control flags may currently be unused, but they should still be validated by the drivers, so that drivers will properly reject any new flags when they are introduced. This series adds some helper functions, and implements them in all 4 drivers. NB: It is currently discussed[1] to use encapsulation control flags for tunnel flags instead of the new FLOW_DISSECTOR_KEY_ENC_FLAGS. [1] https://lore.kernel.org/netdev/ZmFuxElwZiYJzBkh@dcaratti.users.ipa.redhat.com/ ==================== Link: https://lore.kernel.org/r/20240609173358.193178-1-ast@fiberby.netSigned-off-by:
-
Asbjørn Sloth Tønnesen authored
Encapsulation control flags are currently not used anywhere, so all flags are currently unsupported by all drivers. This patch adds validation of this assumption, so that encapsulation flags may be used in the future. In case any encapsulation control flags are masked, flow_rule_match_has_enc_control_flags() sets a NL extended error message, and we return -EOPNOTSUPP. Only compile tested. Signed-off-by:
Asbjørn Sloth Tønnesen <ast@fiberby.net> Reviewed-by:
Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by:
Davide Caratti <dcaratti@redhat.com> Link: https://lore.kernel.org/r/20240609173358.193178-6-ast@fiberby.netSigned-off-by:
-
Asbjørn Sloth Tønnesen authored
Encapsulation control flags are currently not used anywhere, so all flags are currently unsupported by all drivers. This patch adds validation of this assumption, so that encapsulation flags may be used in the future. In case any encapsulation control flags are masked, flow_rule_match_has_enc_control_flags() sets a NL extended error message, and we return -EOPNOTSUPP. Only compile tested. Signed-off-by:
Louis Peens <louis.peens@corigine.com> Reviewed-by:
-
Asbjørn Sloth Tønnesen authored
Encapsulation control flags are currently not used anywhere, so all flags are currently unsupported by all drivers. This patch adds validation of this assumption, so that encapsulation flags may be used in the future. In case any encapsulation control flags are masked, flow_rule_match_has_enc_control_flags() sets a NL extended error message, and we return -EOPNOTSUPP. Only compile tested. Signed-off-by:
-
Asbjørn Sloth Tønnesen authored
Change the existing check for unsupported encapsulation control flags, to use the new helper flow_rule_is_supp_enc_control_flags(). No functional change, only compile tested. Signed-off-by:
Edward Cree <ecree.xilinx@gmail.com> Reviewed-by:
-
Asbjørn Sloth Tønnesen authored
This patch adds two new helper functions: flow_rule_is_supp_enc_control_flags() flow_rule_has_enc_control_flags() They are intended to be used for validating encapsulation control flags, and compliment the similar helpers without "enc_" in the name. The only difference is that they have their own error message, to make it obvious if an unsupported flag error is related to FLOW_DISSECTOR_KEY_CONTROL or FLOW_DISSECTOR_KEY_ENC_CONTROL. flow_rule_has_enc_control_flags() is for drivers supporting FLOW_DISSECTOR_KEY_ENC_CONTROL, but not supporting any encapsulation control flags. (Currently all 4 drivers fits this category) flow_rule_is_supp_enc_control_flags() is currently only used for the above helper, but should also be used by drivers once they implement at least one encapsulation control flag. There is AFAICT currently no need for an "enc_" variant of flow_rule_match_has_control_flags(), as all drivers currently supporting FLOW_DISSECTOR_KEY_ENC_CONTROL, are already calling flow_rule_match_enc_control() directly. Only compile tested. Signed-off-by:
-
Elad Yifee authored
Add the missing pieces to allow multiple PPEs units, one for each GMAC. mtk_gdm_config has been modified to work on targted mac ID, the inner loop moved outside of the function to allow unrelated operations like setting the MAC's PPE index. Introduce a sanity check in flow_offload_replace to account for non-MTK ingress devices. Additional field 'ppe_idx' was added to struct mtk_mac in order to keep track on the assigned PPE unit. Signed-off-by:
Elad Yifee <eladwf@gmail.com> Link: https://lore.kernel.org/r/20240607082155.20021-1-eladwf@gmail.comSigned-off-by:
-
- 12 Jun, 2024 31 commits
-
-
Jakub Kicinski authored
Petr Machata says: ==================== Allow configuration of multipath hash seed Let me just quote the commit message of patch #2 here to inform the motivation and some of the implementation: When calculating hashes for the purpose of multipath forwarding, both IPv4 and IPv6 code currently fall back on flow_hash_from_keys(). That uses a randomly-generated seed. That's a fine choice by default, but unfortunately some deployments may need a tighter control over the seed used. In this patchset, make the seed configurable by adding a new sysctl key, net.ipv4.fib_multipath_hash_seed to control the seed. This seed is used specifically for multipath forwarding and not for the other concerns that flow_hash_from_keys() is used for, such as queue selection. Expose the knob as sysctl because other such settings, such as headers to hash, are also handled that way. Despite being placed in the net.ipv4 namespace, the multipath seed sysctl is used for both IPv4 and IPv6, similarly to e.g. a number of TCP variables. Like those, the multipath hash seed is a per-netns variable. The seed used by flow_hash_from_keys() is a 128-bit quantity. However it seems that usually the seed is a much more modest value. 32 bits seem typical (Cisco, Cumulus), some systems go even lower. For that reason, and to decouple the user interface from implementation details, go with a 32-bit quantity, which is then quadruplicated to form the siphash key. One example of use of this interface is avoiding hash polarization, where two ECMP routers, one behind the other, happen to make consistent hashing decisions, and as a result, part of the ECMP space of the latter router is never used. Another is a load balancer where several machines forward traffic to one of a number of leaves, and the forwarding decisions need to be made consistently. (This is a case of a desired hash polarization, mentioned e.g. in chapter 6.3 of [0].) There has already been a proposal to include a hash seed control interface in the past[1]. - Patches #1-#2 contain the substance of the work - Patch #3 is an mlxsw offload - Patches #4 and #5 are a selftest [0] https://www.usenix.org/system/files/conference/nsdi18/nsdi18-araujo.pdf [1] https://lore.kernel.org/netdev/YIlVpYMCn%2F8WfE1P@rnd/ ==================== Link: https://lore.kernel.org/r/20240607151357.421181-1-petrm@nvidia.comSigned-off-by: -
Petr Machata authored
Add a selftest that exercises the sysctl added in the previous patches. Test that set/get works as expected; that across seeds we eventually hit all NHs (test_mpath_seed_*); and that a given seed keeps hitting the same NHs even across seed changes (test_mpath_seed_stability_*). Signed-off-by:
Petr Machata <petrm@nvidia.com> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240607151357.421181-6-petrm@nvidia.comSigned-off-by:
-
Petr Machata authored
In order to be able to save the current value of a sysctl without changing it, split the relevant bit out of sysctl_set() into a new helper. Signed-off-by:
-
Petr Machata authored
When Spectrum machines compute hash for the purposes of ECMP routing, they use a seed specified through RECR_v2 (Router ECMP Configuration Register). Up until now mlxsw computed the seed by hashing the machine's base MAC. Now that we can optionally have a user-provided seed, use that if possible. Signed-off-by:
-
Petr Machata authored
When calculating hashes for the purpose of multipath forwarding, both IPv4 and IPv6 code currently fall back on flow_hash_from_keys(). That uses a randomly-generated seed. That's a fine choice by default, but unfortunately some deployments may need a tighter control over the seed used. In this patch, make the seed configurable by adding a new sysctl key, net.ipv4.fib_multipath_hash_seed to control the seed. This seed is used specifically for multipath forwarding and not for the other concerns that flow_hash_from_keys() is used for, such as queue selection. Expose the knob as sysctl because other such settings, such as headers to hash, are also handled that way. Like those, the multipath hash seed is a per-netns variable. Despite being placed in the net.ipv4 namespace, the multipath seed sysctl is used for both IPv4 and IPv6, similarly to e.g. a number of TCP variables. The seed used by flow_hash_from_keys() is a 128-bit quantity. However it seems that usually the seed is a much more modest value. 32 bits seem typical (Cisco, Cumulus), some systems go even lower. For that reason, and to decouple the user interface from implementation details, go with a 32-bit quantity, which is then quadruplicated to form the siphash key. Signed-off-by:
-
Petr Machata authored
The following patches will add a sysctl to control multipath hash seed. In order to centralize the hash computation, add a helper, fib_multipath_hash_from_keys(), and have all IPv4 and IPv6 route.c invocations of flow_hash_from_keys() go through this helper instead. Signed-off-by:
-
Sean Anderson authored
This error message can be triggered by userspace. Use NL_SET_ERR_MSG so the message is returned to the user and to avoid polluting the kernel logs. Additionally, change the return value from EFAULT to EBUSY to better reflect the error (which has nothing to do with addressing). Signed-off-by:
Sean Anderson <sean.anderson@linux.dev> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Link: https://lore.kernel.org/r/20240611154116.2643662-1-sean.anderson@linux.devSigned-off-by:
-
Geert Uytterhoeven authored
If CONFIG_PAGE_POOL is not enabled: aarch64-linux-gnu-ld: Unexpected GOT/PLT entries detected! aarch64-linux-gnu-ld: Unexpected run-time procedure linkages detected! aarch64-linux-gnu-ld: drivers/net/ethernet/renesas/ravb_main.o: in function `ravb_rx_ring_refill': ravb_main.c:(.text+0x8d8): undefined reference to `page_pool_alloc_pages' aarch64-linux-gnu-ld: ravb_main.c:(.text+0x944): undefined reference to `page_pool_alloc_frag' aarch64-linux-gnu-ld: drivers/net/ethernet/renesas/ravb_main.o: in function `ravb_ring_init': ravb_main.c:(.text+0x1d4c): undefined reference to `page_pool_create' Fixes: 96672632 ("net: ravb: Allocate RX buffers via page pool") Signed-off-by:Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Paul Barker <paul.barker.ct@bp.renesas.com> Reviewed-by:
Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/fa61b464ae1aa7630e9024f091991937941d49f1.1718113630.git.geert+renesas@glider.beSigned-off-by:
-
Jakub Kicinski authored
Florian Westphal says: ==================== net: flow dissector: allow explicit passing of netns Change since last version: fix kdoc comment warning reported by kbuild robot, no other changes, thus retaining RvB tags from Eric and Willem. v1: https://lore.kernel.org/netdev/20240607083205.3000-1-fw@strlen.de/ Years ago flow dissector gained ability to delegate flow dissection to a bpf program, scoped per netns. The netns is derived from skb->dev, and if that is not available, from skb->sk. If neither is set, we hit a (benign) WARN_ON_ONCE(). This WARN_ON_ONCE can be triggered from netfilter. Known skb origins are nf_send_reset and ipv4 stack generated IGMP messages. Lets allow callers to pass the current netns explicitly and make nf_tables use those instead. This targets net-next instead of net because the WARN is benign and this is not a regression. ==================== Link: https://lore.kernel.org/r/20240608221057.16070-1-fw@strlen.deSigned-off-by:
-
Florian Westphal authored
Similar to previous patch: apply same logic for __skb_get_hash_symmetric and let callers pass the netns to the dissector core. Existing function is turned into a wrapper to avoid adjusting all callers, nft_hash.c uses new function. Reviewed-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Reviewed-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240608221057.16070-3-fw@strlen.deSigned-off-by:
-
Florian Westphal authored
Years ago flow dissector gained ability to delegate flow dissection to a bpf program, scoped per netns. Unfortunately, skb_get_hash() only gets an sk_buff argument instead of both net+skb. This means the flow dissector needs to obtain the netns pointer from somewhere else. The netns is derived from skb->dev, and if that is not available, from skb->sk. If neither is set, we hit a (benign) WARN_ON_ONCE(). Trying both dev and sk covers most cases, but not all, as recently reported by Christoph Paasch. In case of nf-generated tcp reset, both sk and dev are NULL: WARNING: .. net/core/flow_dissector.c:1104 skb_flow_dissect_flow_keys include/linux/skbuff.h:1536 [inline] skb_get_hash include/linux/skbuff.h:1578 [inline] nft_trace_init+0x7d/0x120 net/netfilter/nf_tables_trace.c:320 nft_do_chain+0xb26/0xb90 net/netfilter/nf_tables_core.c:268 nft_do_chain_ipv4+0x7a/0xa0 net/netfilter/nft_chain_filter.c:23 nf_hook_slow+0x57/0x160 net/netfilter/core.c:626 __ip_local_out+0x21d/0x260 net/ipv4/ip_output.c:118 ip_local_out+0x26/0x1e0 net/ipv4/ip_output.c:127 nf_send_reset+0x58c/0x700 net/ipv4/netfilter/nf_reject_ipv4.c:308 nft_reject_ipv4_eval+0x53/0x90 net/ipv4/netfilter/nft_reject_ipv4.c:30 [..] syzkaller did something like this: table inet filter { chain input { type filter hook input priority filter; policy accept; meta nftrace set 1 tcp dport 42 reject with tcp reset } chain output { type filter hook output priority filter; policy accept; # empty chain is enough } } ... then sends a tcp packet to port 42. Initial attempt to simply set skb->dev from nf_reject_ipv4 doesn't cover all cases: skbs generated via ipv4 igmp_send_report trigger similar splat. Moreover, Pablo Neira found that nft_hash.c uses __skb_get_hash_symmetric() which would trigger same warn splat for such skbs. Lets allow callers to pass the current netns explicitly. The nf_trace infrastructure is adjusted to use the new helper. __skb_get_hash_symmetric is handled in the next patch. Reported-by:Christoph Paasch <cpaasch@apple.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/494Reviewed-by:
-
David S. Miller authored
Dmitry Safonov says: ==================== net/tcp: TCP-AO and TCP-MD5 tracepoints Changes in v2: - Fix the build with CONFIG_IPV6=m (Eric Dumazet) - Move unused keyid/rnext/maclen later in the series to the patch that uses them (Simon Horman) - Reworked tcp_ao selftest lib to allow async tracing non-tcp events (was working on a stress-test that needs trace_kfree_skb() event, not in this series). - Separated selftest changes from kernel, as they now have a couple of unrelated to tracepoints changes - Wrote a few lines of Documentation/ - Link to v1: https://lore.kernel.org/r/20240224-tcp-ao-tracepoints-v1-0-15f31b7f30a7@arista.com ==================== Signed-off-by:
Dmitry Safonov <0x7f454c46@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dmitry Safonov authored
Signed-off-by:
-
Dmitry Safonov authored
Now there are tracepoints, that cover all functionality of tcp_hash_fail(), but also wire up missing places They are also faster, can be disabled and provide filtering. This potentially may create a regression if a userspace depends on dmesg logs. Fingers crossed, let's see if anyone complains in reality. Reviewed-by:
-
Dmitry Safonov authored
Instead of forcing userspace to parse dmesg (that's what currently is happening, at least in codebase of my current company), provide a better way, that can be enabled/disabled in runtime. Currently, there are already tcp events, add hashing related ones there, too. Rasdaemon currently exercises net_dev_xmit_timeout, devlink_health_report, but it'll be trivial to teach it to deal with failed hashes. Otherwise, BGP may trace/log them itself. Especially exciting for possible investigations is key rotation (RNext_key requests). Suggested-by:
-
Dmitry Safonov authored
Two reasons: 1. It's grown up enough 2. In order to not do header spaghetti by including <trace/events/tcp.h>, which is necessary for TCP tracepoints. While at it, unexport and make static tcp_inbound_ao_hash(). Reviewed-by:
-
Dmitry Safonov authored
It's going to be used more in TCP-AO tracepoints. Reviewed-by:
-
Dmitry Safonov authored
It's possible to clean-up some ifdefs by hiding that tcp_{md5,ao}_needed static branch is defined and compiled only under related configs, since commit 4c8530dc ("net/tcp: Only produce AO/MD5 logs if there are any keys"). Reviewed-by: -
Jakub Kicinski authored
Matthieu Baerts says: ==================== selftests: mptcp: use net/lib.sh to manage netns The goal of this series is to use helpers from net/lib.sh with MPTCP selftests. - Patches 1 to 4 are some clean-ups and preparation in net/lib.sh: - Patch 1 simplifies the code handling errexit by ignoring possible errors instead of disabling errexit temporary. - Patch 2 removes the netns from the list after having cleaned it, not to try to clean it twice. - Patch 3 removes the 'readonly' attribute for the netns variable, to allow using the same name in local variables. - Patch 4 removes the local 'ns' var, not to conflict with the global one it needs to setup. - Patch 5 uses helpers from net/lib.sh to create and delete netns in MPTCP selftests. - Patch 6 uses wait_local_port_listen helper from net/net_helper.sh. ==================== Link: https://lore.kernel.org/r/20240607-upstream-net-next-20240607-selftests-mptcp-net-lib-v1-0-e36986faac94@kernel.orgSigned-off-by: -
Geliang Tang authored
This patch includes net_helper.sh into mptcp_lib.sh, uses the helper wait_local_port_listen() defined in it to implement the similar mptcp helper. This can drop some duplicate code. It looks like this helper from net_helper.sh was originally coming from MPTCP, but MPTCP selftests have not been updated to use it from this shared place. Signed-off-by:
Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by:
Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by:
-
Geliang Tang authored
This patch includes lib.sh into mptcp_lib.sh, uses setup_ns helper defined in lib.sh to set up namespaces in mptcp_lib_ns_init(), and uses cleanup_ns to delete namespaces in mptcp_lib_ns_exit(). Signed-off-by:
-
Geliang Tang authored
The helper setup_ns() doesn't work when a net namespace named "ns" is passed to it. For example, in net/mptcp/diag.sh, the name of the namespace is "ns". If "setup_ns ns" is used in it, diag.sh fails with errors: Invalid netns name "./mptcp_connect" Cannot open network namespace "10000": No such file or directory Cannot open network namespace "10000": No such file or directory That is because "ns" is also a local variable in setup_ns, and it will not set the value for the global variable that has been giving in argument. To solve this, we could rename the variable, but it sounds better to drop it, as we can resolve the name using the variable passed in argument instead. The other local variables -- "ns_list" and "ns_name" -- are more unlikely to conflict with existing global variables. They don't seem to be currently used in any other net selftests. Co-developed-by:
-
Matthieu Baerts (NGI0) authored
It sounds good to mark the global netns variable as 'readonly', but Bash doesn't allow the creation of local variables with the same name. Because it looks like 'readonly' is mainly used here to check if a netns with that name has already been set, it sounds fine to check if a variable with this name has already been set instead. By doing that, we avoid having to modify helpers from MPTCP selftests using the same variable name as the one used to store the created netns name. While at it, also avoid an unnecessary call to 'eval' to set a local variable. Reviewed-by:
Geliang Tang <geliang@kernel.org> Signed-off-by:
-
Matthieu Baerts (NGI0) authored
Instead of only appending items to the list, removing them when the netns has been deleted. By doing that, we can make sure 'cleanup_all_ns()' is not trying to remove already deleted netns. Reviewed-by:
-
Matthieu Baerts (NGI0) authored
No need to disable errexit temporary, simply ignore the only possible and not handled error. Reviewed-by:
-
Jakub Kicinski authored
Jeremy Kerr says: ==================== net: core: Unify dstats with tstats and lstats, implement generic dstats collection The struct pcpu_dstats ("dstats") has a few variations from the other two stats types (struct pcpu_sw_netstats and struct pcpu_lstats), and doesn't have generic helpers for collecting the per-cpu stats into a struct rtnl_link_stats64. This change unifies dstats with the other types, adds a collection implementation to the core, and updates the single driver (vrf) to use this generic implementation. Of course, questions/comments/etc are most welcome! v3: https://lore.kernel.org/r/20240605-dstats-v2-0-7fae03f813f3@codeconstruct.com.au v2: v1: https://lore.kernel.org/r/20240605-dstats-v1-0-1024396e1670@codeconstruct.com.au ==================== Link: https://lore.kernel.org/r/20240607-dstats-v3-0-cc781fe116f7@codeconstruct.com.auSigned-off-by: -
Jeremy Kerr authored
The vrf driver has its own dstats-to-rtnl_link_stats64 collection, but we now have a generic implementation for dstats collection, so switch to this. In doing so, we fix a minor issue where the (non-percpu) dev->stats->tx_errors value was never collected into rtnl_link_stats64, as the generic dev_get_dstats64() consumes the starting values from dev->stats. Signed-off-by:
Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by:
Simon Horman <horms@kernel.org> Reviewed-by:
-
Jeremy Kerr authored
We currently have dev_get_tstats64() for collecting per-cpu stats of type pcpu_sw_netstats ("tstats"). However, tstats doesn't allow for accounting tx/rx drops. We do have a stats variant that does have stats for dropped packets: struct pcpu_dstats, but there are no core helpers for using those stats. The VRF driver uses dstats, by providing its own collation/fetch functions to do so. This change adds a common implementation for dstats-type collection, used when pcpu_stat_type == NETDEV_PCPU_STAT_DSTAT. This is based on the VRF driver's existing stats collator (plus the unused tx_drops stat from there). We will switch the VRF driver to use this in the next change. Signed-off-by: -
Jeremy Kerr authored
The pcpu_sw_netstats and pcpu_lstats structs both contain a set of u64_stats_t fields for individual stats, but pcpu_dstats uses u64s instead. Make this consistent by using u64_stats_t across all stats types. The per-cpu dstats are only used by the vrf driver at present, so update that driver as part of this change. Signed-off-by:
-
Breno Leitao authored
With commit 34d21de9 ("net: Move {l,t,d}stats allocation to core and convert veth & vrf"), stats allocation could be done on net core instead of this driver. With this new approach, the driver doesn't have to bother with error handling (allocation failure checking, making sure free happens in the right spot, etc). This is core responsibility now. Move ip_tunnel driver to leverage the core allocation. All the ip_tunnel_init() users call ip_tunnel_init() as part of their .ndo_init callback. The .ndo_init callback is called before the stats allocation in netdev_register(), thus, the allocation will happen before the netdev is visible. Signed-off-by:
Breno Leitao <leitao@debian.org> Reviewed-by:
-
Chris Packham authored
Fix a minor typo in the help text for the NET_DSA_TAG_RTL4_A config option. Signed-off-by:
Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by:
Luiz Angelo Daros de Luca <luizluca@gmail.com> Link: https://lore.kernel.org/r/20240607020843.1380735-1-chris.packham@alliedtelesis.co.nzSigned-off-by:
-
- 11 Jun, 2024 1 commit
-
-
Jakub Kicinski authored
Jacob Keller says: ==================== Intel Wired LAN Driver Updates 2024-06-03 This series includes miscellaneous improvements for the ice as well as a cleanup to the Makefiles for all Intel net drivers. Andy fixes all of the Intel net driver Makefiles to use the documented '*-y' syntax for specifying object files to link into kernel driver modules, rather than the '*-objs' syntax which works but is documented as reserved for user-space host programs. Jacob has a cleanup to refactor rounding logic in the ice driver into a common roundup_u64 helper function. Michal Schmidt replaces irq_set_affinity_hint() to use irq_update_affinity_hint() which behaves better with user-applied affinity settings. v2: https://lore.kernel.org/r/20240605-next-2024-06-03-intel-next-batch-v2-0-39c23963fa78@intel.com v1: https://lore.kernel.org/r/20240603-next-2024-06-03-intel-next-batch-v1-0-e0523b28f325@intel.com ==================== Link: https://lore.kernel.org/r/20240607-next-2024-06-03-intel-next-batch-v3-0-d1470cee3347@intel.comSigned-off-by:
-
