- 03 Aug, 2015 4 commits
-
-
Li Jun authored
Since some chipidea based controller is not otg capable, add ci->is_otg condition when setting is_otg flag for gadget. Signed-off-by:
Li Jun <jun.li@freescale.com> Reviewed-by:
Roger Quadros <rogerq@ti.com> Acked-by:
Peter Chen <peter.chen@freescale.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Fupan Li authored
Function printer_func_disable() has called spinlock on printer_dev->lock, and it'll call function chain of printer_reset_interface() | +---dwc3_gadget_ep_disable() | +---__dwc3_gadget_ep_disable() | +---dwc3_remove_requests() | +---dwc3_gadget_giveback() | +---rx_complete() in the protected block. However, rx_complete() in f_printer.c calls spinlock on printer_dev->lock again, which will cause system hang. The following steps can reproduce this hang: 1. Build the test program from Documentation/usb/gadget_printer.txt as g_printer 2. Plug in the USB device to a host(such as Ubuntu). 3. on the USB device system run: #modprobe g_printer.ko #./g_printer -read_data 4. Unplug the USB device from the host The system will hang later. In order to avoid this deadlock, moving the spinlock from printer_func_disable() into printer_reset_interface() and excluding the block of calling dwc3_gadget_ep_disable(), in which the critical resource will be protected by its spinlock in rx_complete(). This commit will fix the system hang with the following calltrace: INFO: rcu_preempt detected stalls on CPUs/tasks: { 3} (detected by 0, t=21006 jiffies, g=524, c=523, q=2) sending NMI to all CPUs: NMI backtrace for cpu 3 CPU: 3 PID: 718 Comm: irq/22-dwc3 Not tainted 3.10.38-ltsi-WR6.0.0.11_standard #2 Hardware name: Intel Corp. VALLEYVIEW B3 PLATFORM/NOTEBOOK, BIOS BYTICRB1.86C.0092.R32.1410021707 10/02/2014 task: f44f4c20 ti: f40f6000 task.ti: f40f6000 EIP: 0060:[<c1824955>] EFLAGS: 00000097 CPU: 3 EIP is at _raw_spin_lock_irqsave+0x35/0x40 EAX: 00000076 EBX: f80fad00 ECX: 00000076 EDX: 00000075 ESI: 00000096 EDI: ffffff94 EBP: f40f7e20 ESP: f40f7e18 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 CR0: 8005003b CR2: b77ac000 CR3: 01c30000 CR4: 001007f0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 Stack: f474a720 f80fad00 f40f7e3c f80f93cc c135d486 00000000 f474a720 f468fb00 f4bea894 f40f7e54 f7e35f19 ffffff00 f468fb00 f468fb24 00000086 f40f7e64 f7e36577 f468fb00 f4bea810 f40f7e74 f7e365a8 f468fb00 f4bea894 f40f7e9c Call Trace: [<f80f93cc>] rx_complete+0x1c/0xb0 [g_printer] [<c135d486>] ? vsnprintf+0x166/0x390 [<f7e35f19>] dwc3_gadget_giveback+0xc9/0xf0 [dwc3] [<f7e36577>] dwc3_remove_requests+0x57/0x70 [dwc3] [<f7e365a8>] __dwc3_gadget_ep_disable+0x18/0x60 [dwc3] [<f7e366e9>] dwc3_gadget_ep_disable+0x89/0xf0 [dwc3] [<f80f9031>] printer_reset_interface+0x31/0x50 [g_printer] [<f80f9270>] printer_func_disable+0x20/0x30 [g_printer] [<f80e6d8b>] composite_disconnect+0x4b/0x90 [libcomposite] [<f7e39a8b>] dwc3_disconnect_gadget+0x38/0x43 [dwc3] [<f7e39ad4>] dwc3_gadget_disconnect_interrupt+0x3e/0x5a [dwc3] [<f7e373b8>] dwc3_thread_interrupt+0x5c8/0x610 [dwc3] [<c10ac518>] irq_thread_fn+0x18/0x30 [<c10ac800>] irq_thread+0x100/0x130 [<c10ac500>] ? irq_finalize_oneshot.part.29+0xb0/0xb0 [<c10ac650>] ? wake_threads_waitq+0x40/0x40 [<c10ac700>] ? irq_thread_dtor+0xb0/0xb0 [<c1057224>] kthread+0x94/0xa0 [<c182b337>] ret_from_kernel_thread+0x1b/0x28 [<c1057190>] ? kthread_create_on_node+0xc0/0xc0 Signed-off-by:
Fupan Li <fupan.li@windriver.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Tony Lindgren authored
With recent changes to MUSB code, we can now now get rid of the Kconfig choise for the DMA code and allow building in any of the desired DMA code. This makes life easier for distros. Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Pengyu Ma authored
When remove module g_serial on quark platform, the following Warning on: Modules linked in: usb_f_acm u_serial g_serial(-) pch_udc libcomposite configfs udc_core ad7298 industrialio_triggered_buffer kfifo_buf tpm_i2c_infineon indus CPU: 0 PID: 369 Comm: modprobe Not tainted 3.14.29ltsi-WR7.0.0.0_standard #6 Hardware name: Intel Corp. QUARK/CrossHill, BIOS 0x010100F5 01/01/2014 f641df0c f641df0c f641dec8 c15ac7fa f641defc c103084f c16c2356 f641df28 00000171 c16b855c 000009dd c15b2d6f 000009dd c15b2d6f f6bd2000 faae5480 00000000 f641df14 c10308a3 00000009 f641df0c c16c2356 f641df28 f641df2c Call Trace: [<c15ac7fa>] dump_stack+0x16/0x18 [<c103084f>] warn_slowpath_common+0x7f/0xa0 [<c15b2d6f>] ? preempt_count_sub+0x6f/0xc0 [<c15b2d6f>] ? preempt_count_sub+0x6f/0xc0 [<c10308a3>] warn_slowpath_fmt+0x33/0x40 [<c15b2d6f>] preempt_count_sub+0x6f/0xc0 [<faadbc82>] pch_udc_pcd_pullup+0x32/0xa0 [pch_udc] [<fa9747d9>] usb_gadget_remove_driver+0x29/0x60 [udc_core] [<fa974869>] usb_gadget_unregister_driver+0x59/0x80 [udc_core] [<faa78310>] usb_composite_unregister+0x10/0x20 [libcomposite] [<faae50f1>] cleanup+0xd/0xf [g_serial] [<c1084c47>] SyS_delete_module+0xf7/0x150 [<c111f8dd>] ? ____fput+0xd/0x10 [<c104b2ae>] ? task_work_run+0x6e/0xa0 [<c15afda5>] syscall_call+0x7/0x7 g_serial module on quark is depended on pch_udc module, ttyGSX cann't recieve data and warning on when remove g_serial. It was unlocked before the modification of the structure it was protecting, fix it as "lock -> unlock" to resolve this. Signed-off-by:
Pengyu Ma <pengyu.ma@windriver.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
- 31 Jul, 2015 10 commits
-
-
Peter Chen authored
testusb.c at http://www.linux-usb.org/usbtest/ is out of date, using the one at the kernel source folder. Cc: <stable@vger.kernel.org> Signed-off-by:
Peter Chen <peter.chen@freescale.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Peter Chen authored
Fix the name of attribute Cc: <stable@vger.kernel.org> Signed-off-by:
Peter Chen <peter.chen@freescale.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Peter Chen authored
Fix the name of attribute Cc: <stable@vger.kernel.org> Signed-off-by:
Peter Chen <peter.chen@freescale.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Krzysztof Opasiak authored
This patch replace dynamicly allocated luns array with static one. This simplifies the code of mass storage function and modules. Signed-off-by:
Krzysztof Opasiak <k.opasiak@samsung.com> Acked-by:
Michal Nazarewicz <mina86@mina86.com>
-
Krzysztof Opasiak authored
Use device_is_registered() instad of sysfs flag to determine if we should free sysfs representation of particular LUN. sysfs flag in fsg common determines if luns attributes should be exposed using sysfs. This flag is used when creating and freeing luns. Unfortunately there is no guarantee that this flag will not be changed between creation and removal of particular LUN. Especially because of lun.0 which is created during allocating instance of function. This may lead to resource leak or NULL pointer dereference: [ 62.539925] Unable to handle kernel NULL pointer dereference at virtual address 00000044 [ 62.548014] pgd = ec994000 [ 62.550679] [00000044] *pgd=6d7be831, *pte=00000000, *ppte=00000000 [ 62.556933] Internal error: Oops: 17 [#1] PREEMPT SMP ARM [ 62.562310] Modules linked in: g_mass_storage(+) [ 62.566916] CPU: 2 PID: 613 Comm: insmod Not tainted 4.2.0-rc4-00077-ge29ee91-dirty #125 [ 62.574984] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 62.581061] task: eca56e80 ti: eca76000 task.ti: eca76000 [ 62.586450] PC is at kernfs_find_ns+0x8/0xe8 [ 62.590698] LR is at kernfs_find_and_get_ns+0x30/0x48 [ 62.595732] pc : [<c01277c0>] lr : [<c0127b88>] psr: 40010053 [ 62.595732] sp : eca77c40 ip : eca77c38 fp : 000008c1 [ 62.607187] r10: 00000001 r9 : c0082f38 r8 : ed41ce40 [ 62.612395] r7 : c05c1484 r6 : 00000000 r5 : 00000000 r4 : c0814488 [ 62.618904] r3 : 00000000 r2 : 00000000 r1 : c05c1484 r0 : 00000000 [ 62.625417] Flags: nZcv IRQs on FIQs off Mode SVC_32 ISA ARM Segment user [ 62.632620] Control: 10c5387d Table: 6c99404a DAC: 00000015 [ 62.638348] Process insmod (pid: 613, stack limit = 0xeca76210) [ 62.644251] Stack: (0xeca77c40 to 0xeca78000) [ 62.648594] 7c40: c0814488 00000000 00000000 c05c1484 ed41ce40 c0127b88 00000000 c0824888 [ 62.656753] 7c60: ed41d038 ed41d030 ed41d000 c012af4c 00000000 c0824858 ed41d038 c02e3314 [ 62.664912] 7c80: ed41d030 00000000 ed41ce04 c02d9e8c c070eda8 eca77cb4 000008c1 c058317c [ 62.673071] 7ca0: 000008c1 ed41d030 ed41ce00 ed41ce04 ed41d000 c02da044 ed41cf48 c0375870 [ 62.681230] 7cc0: ed9d3c04 ed9d3c00 ed52df80 bf000940 fffffff0 c03758f4 c03758c0 00000000 [ 62.689389] 7ce0: bf000564 c03614e0 ed9d3c04 bf000194 c0082f38 00000001 00000000 c0000100 [ 62.697548] 7d00: c0814488 c0814488 c086b1dc c05893a8 00000000 ed7e8320 00000000 c0128b88 [ 62.705707] 7d20: ed8a6b40 00000000 00000000 ed410500 ed8a6b40 c0594818 ed7e8320 00000000 [ 62.713867] 7d40: 00000000 c0129f20 00000000 c082c444 ed8a6b40 c012a684 00001000 00000000 [ 62.722026] 7d60: c0594818 c082c444 00000000 00000000 ed52df80 ed52df80 00000000 00000000 [ 62.730185] 7d80: 00000000 00000000 00000001 00000002 ed8e9b70 ed52df80 bf0006d0 00000000 [ 62.738345] 7da0: ed8e9b70 ed410500 ed618340 c036129c ed8c1c00 bf0006d0 c080b158 ed8c1c00 [ 62.746504] 7dc0: bf0006d0 c080b158 ed8c1c08 ed410500 c0082f38 ed618340 000008c1 c03640ac [ 62.754663] 7de0: 00000000 bf0006d0 c082c8dc c080b158 c080b158 c03642d4 00000000 bf003000 [ 62.762822] 7e00: 00000000 c0009784 00000000 00000001 00000000 c05849b0 00000002 ee7ab780 [ 62.770981] 7e20: 00000002 ed4105c0 0000c53e 000000d0 c0808600 eca77e5c 00000004 00000000 [ 62.779140] 7e40: bf000000 c0095680 c08075a0 ee001f00 ed4105c0 c00cadc0 ed52df80 bf000780 [ 62.787300] 7e60: ed4105c0 bf000780 00000001 bf0007c8 c0082f38 ed618340 000008c1 c0083e24 [ 62.795459] 7e80: 00000001 bf000780 00000001 eca77f58 00000001 bf000780 00000001 c00857f4 [ 62.803618] 7ea0: bf00078c 00007fff 00000000 c00835b4 eca77f58 00000000 c0082fac eca77f58 [ 62.811777] 7ec0: f05038c0 0003b008 bf000904 00000000 00000000 bf00078c 6e72656b 00006c65 [ 62.819936] 7ee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 62.828095] 7f00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 62.836255] 7f20: 00000000 00000000 00000000 00000000 00000000 00000000 00000003 0003b008 [ 62.844414] 7f40: 0000017b c000f5c8 eca76000 00000000 0003b008 c0085df8 f04ef000 0001b8a9 [ 62.852573] 7f60: f0503258 f05030c2 f0509fe8 00000968 00000dc8 00000000 00000000 00000000 [ 62.860732] 7f80: 00000029 0000002a 00000011 00000000 0000000a 00000000 33f6eb00 0003b008 [ 62.868892] 7fa0: bef01cac c000f400 33f6eb00 0003b008 00000003 0003b008 00000000 00000003 [ 62.877051] 7fc0: 33f6eb00 0003b008 bef01cac 0000017b 00000000 0003b008 0000000b 0003b008 [ 62.885210] 7fe0: bef01ae0 bef01ad0 0001dc23 b6e8c162 800b0070 00000003 c0c0c0c0 c0c0c0c0 [ 62.893380] [<c01277c0>] (kernfs_find_ns) from [<c0824888>] (pm_qos_latency_tolerance_attr_group+0x0/0x10) [ 62.903005] Code: e28dd00c e8bd80f0 e92d41f0 e2923000 (e1d0e4b4) [ 62.909115] ---[ end trace 02fb4373ef095c7b ]--- Acked-by:
Michal Nazarewicz <mina86@mina86.com> Signed-off-by:
Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Robert Baldyga authored
Add missing return value check. In case of error print debug message and return error code. Signed-off-by:
Robert Baldyga <r.baldyga@samsung.com> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by:
Michal Nazarewicz <mina86@mina86.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Robert Baldyga authored
Since maxpacket_limit was introduced all UDC drivers should use usb_ep_set_maxpacket_limit() function instead of setting maxpacket value manually. ep.maxpacket_limit contains actual maximum maxpacket value supported by hardware which is needed by epautoconf. Signed-off-by:
Robert Baldyga <r.baldyga@samsung.com> Acked-by:
Michal Nazarewicz <mina86@mina86.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Robert Baldyga authored
Since maxpacket_limit was introduced all UDC drivers should use usb_ep_set_maxpacket_limit() function instead of setting maxpacket value manually. ep.maxpacket_limit contains actual maximum maxpacket value supported by hardware which is needed by epautoconf. Signed-off-by:
Robert Baldyga <r.baldyga@samsung.com> Acked-by:
Michal Nazarewicz <mina86@mina86.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Robert Baldyga authored
Function midi registers two interfaces with single set_alt() function which means that f_midi_set_alt() is called twice when configuration is set. That means that endpoint initialization and ep request allocation is done two times. To avoid this problem we do such things only once, for interface number 1 (MIDI Streaming interface). Signed-off-by:
Robert Baldyga <r.baldyga@samsung.com> Acked-by:
Michal Nazarewicz <mina86@mina86.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Robert Baldyga authored
Function ffs_do_functionfs_bind() calls functionfs_bind() which allocates usb request and increments refcounts. These things needs to be cleaned up by if further steps of initialization fail by calling functionfs_unbind(). Signed-off-by:
Robert Baldyga <r.baldyga@samsung.com> Acked-by:
Michal Nazarewicz <mina86@mina86.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
- 30 Jul, 2015 17 commits
-
-
Peter Chen authored
According to USB Audio Device 2.0 Spec, Ch4.10.1.1: wMaxPacketSize is defined as follows: Maximum packet size this endpoint is capable of sending or receiving when this configuration is selected. This is determined by the audio bandwidth constraints of the endpoint. In current code, the wMaxPacketSize is defined as the maximum packet size for ISO endpoint, and it will let the host reserve much more space than it really needs, so that we can't let more endpoints work together at one frame. We find this issue when we try to let 4 f_uac2 gadgets work together [1] at FS connection. [1]http://www.spinics.net/lists/linux-usb/msg123478.htmlAcked-by:
Daniel Mack <zonque@gmail.com> Cc: andrzej.p@samsung.com Cc: Daniel Mack <zonque@gmail.com> Cc: tiwai@suse.de Cc: <stable@vger.kernel.org> #v3.18+ Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Peter Chen <peter.chen@freescale.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Sanjay Singh Rawat authored
After the worker thread is launched, bind function is doing further configuration. In case of failure stop the thread. Acked-by:
Michal Nazarewicz <mina86@mina86.com> Signed-off-by:
Sanjay Singh Rawat <snjsrwt@gmail.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Dan Carpenter authored
There is an "&&" vs "||" typo here so this loops 3000 times or if we get unlucky it could loop forever. Fixes: ceaa0a6e ('usb: gadget: m66592-udc: add support for TEST_MODE') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Dan Carpenter authored
We handle the "if (!req->req.length)" condition at the start of the function and return. We can delete this dead code. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Ivan T. Ivanov authored
apq8016-sbc board is using Dual SPDT USB Switch (TC7USB40MU), witch is controlled by GPIO to de/multiplex D+/D- USB lines to USB2513B Hub and uB connector. Add support for this. Signed-off-by:
Ivan T. Ivanov <ivan.ivanov@linaro.org> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Robert Baldyga authored
Replace calls of gadget_supports_altsettings() function (which check altset support by comparing UDC controller name with hardcoded names) with gadget_is_altset_supported() which checks generic quirk bitfield. Signed-off-by:
Robert Baldyga <r.baldyga@samsung.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Robert Baldyga authored
Use generic mechanism to check if UDC controller supports zlp. Signed-off-by:
Robert Baldyga <r.baldyga@samsung.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Robert Baldyga authored
Use generic mechanism to check if UDC controller supports stalling. Signed-off-by:
Robert Baldyga <r.baldyga@samsung.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Robert Baldyga authored
Due to some UDC controllers may not support zlp, usb gadget layer needs to provide a generic way to inform gadget functions about non-standard hardware limitations. This patch adds 'quirk_zlp_not_supp' field to struct usb_gadget and helper function gadget_is_zlp_supported(). It also sets 'quirk_zlp_not_supp' to 1 in musb UDC driver, which has such limitation. [ balbi@ti.com : make it build ] Signed-off-by:
Robert Baldyga <r.baldyga@samsung.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Robert Baldyga authored
Due to some UDC controllers may not support stalling, usb gadget layer needs to provide a generic way to inform gadget functions about non-standard hardware limitations. This patch adds 'quirk_stall_not_supp' field to struct usb_gadget and helper function gadget_is_stall_supported(). It also sets 'quirk_stall_not_supp' to 1 in at91_udc driver, which has such limitation. Signed-off-by:
Robert Baldyga <r.baldyga@samsung.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Robert Baldyga authored
Due to some UDC controllers may not support altsettings, usb gadget layer needs to provide a generic way to inform gadget functions about non-standard hardware limitations. This patch adds 'quirk_altset_not_supp' field to struct usb_gadget and helper function gadget_is_altset_supported(). It also sets 'quirk_altset_not_supp' to 1 in pxa25x_udc and pxa27x_udc drivers, which have such limitation. Signed-off-by:
Robert Baldyga <r.baldyga@samsung.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Kishon Vijay Abraham I authored
Use chained TRB mechanism to handle non maxpacket aligned transfers greater than bounce buffer size. With this the first TRB will be programmed to receive 'ALIGN(ur->length - maxp, maxp)' data and the second TRB will be programmed to receive the remaining data using bounce buffer. Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Kishon Vijay Abraham I authored
Add chained TRB support to ep0. Now TRB's can be chained just by invoking _dwc3_ep0_start_trans_ with 'chain' parameter set to true. Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Kishon Vijay Abraham I authored
No functional change. Added a new parameter in _dwc3_ep0_start_trans_ to indicate whether the TRB is a chained TRB or last TRB. This is in preparation for adding chained TRB support for ep0. Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Kishon Vijay Abraham I authored
No functional change. This is in preparation for handling non maxpacket aligned transfers greater than bounce buffer size. This is basically to avoid code duplication when using chained TRB transfers to handle non maxpacket aligned transfers greater than bounce buffer size. Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Kishon Vijay Abraham I authored
No functional change. Used _roundup_ macro to calculate the transfer size aligned to maxpacket in dwc3_ep0_complete_data. It also makes it similar to how transfer size is calculated in __dwc3_ep0_do_control_data. Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Kishon Vijay Abraham I authored
DWC3 uses bounce buffer to handle non max packet aligned OUT transfers and the size of bounce buffer is 512 bytes. However if the host initiates OUT transfers of size more than 512 bytes (and non max packet aligned), the driver throws a WARN dump but still programs the TRB to receive more than 512 bytes. This will cause bounce buffer to overflow and corrupt the adjacent memory locations which can be fatal. Fix it by programming the TRB to receive a maximum of DWC3_EP0_BOUNCE_SIZE (512) bytes. Cc: <stable@vger.kernel.org> # 3.4+ Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
- 29 Jul, 2015 9 commits
-
-
Phil Edworthy authored
These changes allow a PHY driver to trigger a VBUS interrupt and to provide the value of VBUS. Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Li Jun authored
Allocate and initialize usb otg descriptor according to gadget otg capabilities, add it for each usb configurations. If otg capability is not defined, keep its original otg descriptor unchanged. Reviewed-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
Li Jun <jun.li@freescale.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Li Jun authored
Allocate and initialize usb otg descriptor according to gadget otg capabilities, add it for each usb configurations. If otg capability is not defined, keep its original otg descriptor unchanged. Reviewed-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
Li Jun <jun.li@freescale.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Li Jun authored
Allocate and initialize usb otg descriptor according to gadget otg capabilities, add it for each usb configurations. If otg capability is not defined, keep its original otg descriptor unchanged. Reviewed-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
Li Jun <jun.li@freescale.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Li Jun authored
Allocate and initialize usb otg descriptor according to gadget otg capabilities, add it for each usb configurations. If otg capability is not defined, keep its original otg descriptor unchanged. Signed-off-by:
Li Jun <jun.li@freescale.com> Reviewed-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Li Jun authored
Allocate and initialize usb otg descriptor according to gadget otg capabilities, add it for each usb configurations. If otg capability is not defined, keep its original otg descriptor unchanged. Signed-off-by:
Li Jun <jun.li@freescale.com> Reviewed-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Li Jun authored
Allocate and initialize usb otg descriptor according to gadget otg capabilities, add it for each usb configurations. If otg capability is not defined, keep its original otg descriptor unchanged. Signed-off-by:
Li Jun <jun.li@freescale.com> Reviewed-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Li Jun authored
Allocate and initialize usb otg descriptor according to gadget otg capabilities, add it for each usb configurations. If otg capability is not defined, keep its original otg descriptor unchanged. Signed-off-by:
Li Jun <jun.li@freescale.com> Reviewed-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Li Jun authored
Allocate and initialize usb otg descriptor according to gadget otg capabilities, add it for each usb configurations. If otg capability is not defined, keep its original otg descriptor unchanged. Signed-off-by:
Li Jun <jun.li@freescale.com> Reviewed-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-