Skip to content

L
linux
Switch branch/tag
  1. 04 Feb, 2013 9 commits
  3. 03 Feb, 2013 1 commit
  5. 02 Feb, 2013 1 commit
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending · 8b31849a
      Linus Torvalds authored 
      Pull scsi target fixes from Nicholas Bellinger:
 "Here's the current set of v3.8-rc fixes in the target-pending.git
  queue.  Apologies in advance for these missing the -rc6 release, and
  having to be destined for -rc7 code.

  The majority of these patches are regression bugfixes specific to
  v3.8-rc code changes, namely the zero-length CDB handling breakage
  after the sense_reason_t conversion, and preventing configfs port
  linking for unconfigured devices after the recent struct
  se_subsystem_dev removal.  These is also one (the divide by zero bug
  for unconfigured devices) that is CC'ed to stable."

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  target: Fix divide by zero bug in fabric_max_sectors for unconfigured devices
  target: Fix regression allowing unconfigured devices to fabric port link
  tcm_vhost: fix pr_err on early kick
  target: Fix zero-length READ_CAPACITY_16 regression
  target: Fix zero-length MODE_SENSE regression
  target: Fix zero-length INQUIRY additional sense code regression
      8b31849a
  7. 01 Feb, 2013 5 commits
  9. 31 Jan, 2013 22 commits
    • Dave Airlie's avatar
      Merge branch 'drm-fixes-3.8' of git://people.freedesktop.org/~agd5f/linux · 089c71a7
      Dave Airlie authored 
      Alex writes:
"A few more radeon fixes for 3.8.  Mostly small stuff.  The big
change is disabling the use of the DMA ring for VM PT updates.  This
reverts back to the 3.7 behavior.  Problem is we can get huge PT
updates in certain cases that are too big for the DMA ring.  I've
got patches to use an IB for this so I can re-enable the use of the
DMA ring for VM PT updates in 3.9.  This request also includes the
patches from the last pull request I sent on Monday in case you haven't
pulled them yet."

* 'drm-fixes-3.8' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: switch back to the CP ring for VM PT updates
  drm/radeon: prevent crash in the ring space allocation
  drm/radeon: Calling object_unrefer() when creating fb failure
  drm/radeon/r5xx-r7xx: wait for the MC to settle after MC blackout
  drm/radeon/evergreen+: wait for the MC to settle after MC blackout
  drm/radeon: protect against div by 0 in backend setup
  drm/radeon: fix backend map setup on 1 RB sumo boards
  drm/radeon: add quirk for RV100 board
  drm/radeon: add WAIT_UNTIL to the non-VM safe regs list for cayman/TN
  drm/radeon: fix MC blackout on evergreen+
      089c71a7
    • Nicholas Bellinger's avatar
      target: Fix divide by zero bug in fabric_max_sectors for unconfigured devices · 7a3cf6ca
      Nicholas Bellinger authored 
      This patch fixes a possible divide by zero bug when the fabric_max_sectors
device attribute is written and backend se_device failed to be successfully
configured -> enabled.

Go ahead and use block_size=512 within se_dev_set_fabric_max_sectors()
in the event of a target_configure_device() failure case, as no valid
dev->dev_attrib.block_size value will have been setup yet.

Cc: stable@vger.kernel.org
Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      7a3cf6ca
    • Nicholas Bellinger's avatar
      target: Fix regression allowing unconfigured devices to fabric port link · faa06ab9
      Nicholas Bellinger authored 
      This patch fixes a v3.8-rc1 regression bug where an unconfigured se_device
was incorrectly allowed to perform a fabric port-link.  This bug was
introduced in commit:

  commit 0fd97ccf
  Author: Christoph Hellwig <hch@infradead.org>
  Date:   Mon Oct 8 00:03:19 2012 -0400

      target: kill struct se_subsystem_dev

which ended up dropping the original se_subsystem_dev->se_dev_ptr check
preventing this from happening with pre commit 0fd97ccf code.

Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      faa06ab9
    • Linus Torvalds's avatar
      Merge branch 'for-3.8/upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid · cf5425bf
      Linus Torvalds authored 
      PullHID fixes from Jiri Kosina:

 - fix i2c-hid and hidraw interaction, by Benjamin Tissoires

 - a quirk to make a particular device (Formosa IR receiver) work
   properly, by Nicholas Santos

* 'for-3.8/upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: i2c-hid: fix i2c_hid_output_raw_report
  HID: usbhid: quirk for Formosa IR receiver
  HID: remove x bit from sensor doc
      cf5425bf
    • Linus Torvalds's avatar
      Merge tag 'nfs-for-3.8-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs · bf6c8a81
      Linus Torvalds authored 
      Pull NFS client bugfixes from Trond Myklebust:

 - Error reporting in nfs_xdev_mount incorrectly maps all errors to
   ENOMEM

 - Fix an NFSv4 refcounting issue

 - Fix a mount failure when the server reboots during NFSv4 trunking
   discovery

 - NFSv4.1 mounts may need to run the lease recovery thread.

 - Don't silently fail setattr() requests on mountpoints

 - Fix a SUNRPC socket/transport livelock and priority queue issue

 - We must handle NFS4ERR_DELAY when resetting the NFSv4.1 session.

* tag 'nfs-for-3.8-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFSv4.1: Handle NFS4ERR_DELAY when resetting the NFSv4.1 session
  SUNRPC: When changing the queue priority, ensure that we change the owner
  NFS: Don't silently fail setattr() requests on mountpoints
  NFSv4.1: Ensure that nfs41_walk_client_list() does start lease recovery
  NFSv4: Fix NFSv4 trunking discovery
  NFSv4: Fix NFSv4 reference counting for trunked sessions
  NFS: Fix error reporting in nfs_xdev_mount
      bf6c8a81
    • Linus Torvalds's avatar
      Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus · aeb8eede
      Linus Torvalds authored 
      Pull MIPS updates from Ralf Baechle:
 "A number of fixes all across the MIPS tree.  No area is particularly
  standing out and things have cooled down quite nicely for a release."

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: Function tracer: Fix broken function tracing
  mips: Move __virt_addr_valid() to a place for MIPS 64
  MIPS: Netlogic: Fix UP compilation on XLR
  MIPS: AR71xx: Fix AR71XX_PCI_MEM_SIZE
  MIPS: AR724x: Fix AR724X_PCI_MEM_SIZE
  MIPS: Lantiq: Fix cp0_perfcount_irq mapping
  MIPS: DSP: Fix DSP mask for registers.
  MIPS: Fix build failure by adding definition of pfn_pmd().
  MIPS: Octeon: Fix warning.
  MIPS: delay.c: Check BITS_PER_LONG instead of __SIZEOF_LONG__
  MIPS: PNX833x: Fix comment.
  MIPS: Add struct p_format to union mips_instruction.
  MIPS: Export <asm/break.h>.
  MIPS: BCM47xx: Enable SSB prerequisite SSB_DRIVER_PCICORE.
  MIPS: BCM47xx: Select GPIOLIB for BCMA on bcm47xx platform
  MIPS: vpe.c: Fix null pointer dereference in print arguments.
      aeb8eede
    • Alex Deucher's avatar
      drm/radeon: switch back to the CP ring for VM PT updates · 3646e420
      Alex Deucher authored 
      For large VM page table updates, we can sometimes generate
more packets than there is space on the ring.  This happens
more readily with the DMA ring since it is 64K (vs 1M for the
CP).  For now, switch back to the CP.  For the next kernel,
I have a patch to utilize IBs for VM PT updates which
alleviates this problem.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=58354Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
      3646e420
    • Alex Deucher's avatar
      drm/radeon: prevent crash in the ring space allocation · fd5d93a0
      Alex Deucher authored 
      If the requested number of DWs on the ring is larger than
the size of the ring itself, return an error.

In testing with large VM updates, we've seen crashes when we
try and allocate more space on the ring than the total size
of the ring without checking.

This prevents the crash but for large VM updates or bo moves
of very large buffers, we will need to break the transaction
down into multiple batches.  I have patches to use IBs for
the next kernel.
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
      fd5d93a0
    • liu chuansheng's avatar
      drm/radeon: Calling object_unrefer() when creating fb failure · f2d68cf4
      liu chuansheng authored 
      When kzalloc() failed in radeon_user_framebuffer_create(), need to
call object_unreference() to match the object_reference().
Signed-off-by: default avatarliu chuansheng <chuansheng.liu@intel.com>
Signed-off-by: default avatarxueminsu <xuemin.su@intel.com>
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
      f2d68cf4
    • Alex Deucher's avatar
      drm/radeon/r5xx-r7xx: wait for the MC to settle after MC blackout · 39dc9aab
      Alex Deucher authored 
      Some chips seem to need a little delay after blacking out
the MC before the requests actually stop. Stop DMAR errors
reported by Shuah Khan.
Reported-by: default avatarShuah Khan <shuahkhan@gmail.com>
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
      39dc9aab
    • Michael S. Tsirkin's avatar
      tcm_vhost: fix pr_err on early kick · 71f1e45a
      Michael S. Tsirkin authored 
      It's OK to get kick before backend is set or after
it is cleared, we can just ignore it.
Signed-off-by: default avatarMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      71f1e45a
    • Benjamin Tissoires's avatar
      HID: i2c-hid: fix i2c_hid_output_raw_report · c284979a
      Benjamin Tissoires authored 
      i2c_hid_output_raw_report is used by hidraw to forward set_report requests.
The current implementation of i2c_hid_set_report needs to take the
report_id as an argument. The report_id is stored in the first byte
of the buffer in argument of i2c_hid_output_raw_report.

Not removing the report_id from the given buffer adds this byte 2 times
in the command, leading to a non working command.
Reported-by: default avatarAndrew Duggan <aduggan@synaptics.com>
Signed-off-by: default avatarBenjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
      c284979a
    • Al Cooper's avatar
      MIPS: Function tracer: Fix broken function tracing · 58b69401
      Al Cooper authored 
      Function tracing is currently broken for all 32 bit MIPS platforms.
When tracing is enabled, the kernel immediately hangs on boot.
This is a result of commit b732d439
that changes the kernel/trace/Kconfig file so that is no longer
forces FRAME_POINTER when FUNCTION_TRACING is enabled.

MIPS frame pointers are generally considered to be useless because
they cannot be used to unwind the stack. Unfortunately the MIPS
function tracing code has bugs that are masked by the use of frame
pointers. This commit fixes the bugs so that MIPS frame pointers
don't need to be enabled.

The bugs are a result of the odd calling sequence used to call the trace
routine. This calling sequence is inserted into every traceable function
when the tracing CONFIG option is enabled. This sequence is generated
for 32bit MIPS platforms by the compiler via the "-pg" flag.

Part of the sequence is "addiu sp,sp,-8" in the delay slot after every
call to the trace routine "_mcount" (some legacy thing where 2 arguments
used to be pushed on the stack). The _mcount routine is expected to
adjust the sp by +8 before returning.  So when not disabled, the original
jalr and addiu will be there, so _mcount has to adjust sp.

The problem is that when tracing is disabled for a function, the
"jalr _mcount" instruction is replaced with a nop, but the
"addiu sp,sp,-8" is still executed and the stack pointer is left
trashed. When frame pointers are enabled the problem is masked
because any access to the stack is done through the frame
pointer and the stack pointer is restored from the frame pointer when
the function returns.

This patch writes two nops starting at the address of the "jalr _mcount"
instruction whenever tracing is disabled. This means that the
"addiu sp,sp.-8" will be converted to a nop along with the "jalr".  When
disabled, there will be two nops.

This is SMP safe because the first time this happens is during
ftrace_init() which is before any other processor has been started.
Subsequent calls to enable/disable tracing when other CPUs ARE running
will still be safe because the enable will only change the first nop
to a "jalr" and the disable, while writing 2 nops, will only be changing
the "jalr". This patch also stops using stop_machine() to call the
tracer enable/disable routines and calls them directly because the
routines are SMP safe.

When the kernel first boots we have to be able to handle the gcc
generated jalr, addui sequence until ftrace_init gets a chance to run
and change the sequence. At this point mcount just adjusts the stack
and returns. When ftrace_init runs, we convert the jalr/addui to nops.
Then whenever tracing is enabled we convert the first nop to a "jalr
mcount+8". The mcount+8 entry point skips the stack adjust.

[ralf@linux-mips.org: Folded in  Steven Rostedt's build fix.]
Signed-off-by: default avatarAl Cooper <alcooperx@gmail.com>
Cc: rostedt@goodmis.org
Cc: ddaney.cavm@gmail.com
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/4806/
Patchwork: https://patchwork.linux-mips.org/patch/4841/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      58b69401
    • Alasdair G Kergon's avatar
      dm: fix write same requests counting · fe7af2d3
      Alasdair G Kergon authored 
      When processing write same requests, fix dm to send the configured
number of WRITE SAME requests to the target rather than the number of
discards, which is not always the same.

Device-mapper WRITE SAME support was introduced by commit
23508a96 ("dm: add WRITE SAME support").
Signed-off-by: default avatarAlasdair G Kergon <agk@redhat.com>
Acked-by: default avatarMike Snitzer <snitzer@redhat.com>
      fe7af2d3
    • Steven Rostedt's avatar
      mips: Move __virt_addr_valid() to a place for MIPS 64 · 196897a2
      Steven Rostedt authored 
      Commit d3ce8843 "MIPS: Fix modpost error in modules attepting to use
virt_addr_valid()" moved __virt_addr_valid() from a macro in a header
file to a function in ioremap.c. But ioremap.c is only compiled for MIPS
32, and not for MIPS 64.

When compiling for my yeeloong2, which supposedly supports hibernation,
which compiles kernel/power/snapshot.c which calls virt_addr_valid(), I
got this error:

  LD      init/built-in.o
kernel/built-in.o: In function `memory_bm_free':
snapshot.c:(.text+0x4c9c4): undefined reference to `__virt_addr_valid'
snapshot.c:(.text+0x4ca58): undefined reference to `__virt_addr_valid'
kernel/built-in.o: In function `snapshot_write_next':
(.text+0x4e44c): undefined reference to `__virt_addr_valid'
kernel/built-in.o: In function `snapshot_write_next':
(.text+0x4e890): undefined reference to `__virt_addr_valid'
make[1]: *** [vmlinux] Error 1
make: *** [sub-make] Error 2

I suspect that __virt_addr_valid() is fine for mips 64. I moved it to
mmap.c such that it gets compiled for mips 64 and 32.
Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4842/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      196897a2
    • Mike Snitzer's avatar
      dm thin: fix queue limits stacking · 0f640dca
      Mike Snitzer authored 
      thin_io_hints() is blindly copying the queue limits from the thin-pool
which can lead to incorrect limits being set.  The fix here simply
deletes the thin_io_hints() hook which leaves the existing stacking
infrastructure to set the limits correctly.

When a thin-pool uses an MD device for the data device a thin device
from the thin-pool must respect MD's constraints about disallowing a bio
from spanning multiple chunks.  Otherwise we can see problems.  If the raid0
chunksize is 1152K and thin-pool chunksize is 256K I see the following
md/raid0 error (with extra debug tracing added to thin_endio) when
mkfs.xfs is executed against the thin device:

md/raid0:md99: make_request bug: can't convert block across chunks or bigger than 1152k 6688 127
device-mapper: thin: bio sector=2080 err=-5 bi_size=130560 bi_rw=17 bi_vcnt=32 bi_idx=0

This extra DM debugging shows that the failing bio is spanning across
the first and second logical 1152K chunk (sector 2080 + 255 takes the
bio beyond the first chunk's boundary of sector 2304).  So the bio
splitting that DM is doing clearly isn't respecting the MD limits.

max_hw_sectors_kb is 127 for both the thin-pool and thin device
(queue_max_hw_sectors returns 255 so we'll excuse sysfs's lack of
precision).  So this explains why bi_size is 130560.

But the thin device's max_hw_sectors_kb should be 4 (PAGE_SIZE) given
that it doesn't have a .merge function (for bio_add_page to consult
indirectly via dm_merge_bvec) yet the thin-pool does sit above an MD
device that has a compulsory merge_bvec_fn.  This scenario is exactly
why DM must resort to sending single PAGE_SIZE bios to the underlying
layer. Some additional context for this is available in the header for
commit 8cbeb67a ("dm: avoid unsupported spanning of md stripe boundaries").

Long story short, the reason a thin device doesn't properly get
configured to have a max_hw_sectors_kb of 4 (PAGE_SIZE) is that
thin_io_hints() is blindly copying the queue limits from the thin-pool
device directly to the thin device's queue limits.

Fix this by eliminating thin_io_hints.  Doing so is safe because the
block layer's queue limits stacking already enables the upper level thin
device to inherit the thin-pool device's discard and minimum_io_size and
optimal_io_size limits that get set in pool_io_hints.  But avoiding the
queue limits copy allows the thin and thin-pool limits to be different
where it is important, namely max_hw_sectors_kb.
Reported-by: default avatarDaniel Browning <db@kavod.com>
Signed-off-by: default avatarMike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarAlasdair G Kergon <agk@redhat.com>
      0f640dca
    • Alex Deucher's avatar
      drm/radeon/evergreen+: wait for the MC to settle after MC blackout · ed39fadd
      Alex Deucher authored 
      Some chips seem to need a little delay after blacking out
the MC before the requests actually stop.

May fix:
https://bugs.freedesktop.org/show_bug.cgi?id=56139
https://bugs.freedesktop.org/show_bug.cgi?id=57567Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
      ed39fadd
    • Jan Beulich's avatar
      x86-64: Replace left over sti/cli in ia32 audit exit code · 40a1ef95
      Jan Beulich authored 
      For some reason they didn't get replaced so far by their
paravirt equivalents, resulting in code to be run with
interrupts disabled that doesn't expect so (causing, in the
observed case, a BUG_ON() to trigger) when syscall auditing is
enabled.

David (Cc-ed) came up with an identical fix, so likely this can
be taken to count as an ack from him.
Reported-by: default avatarPeter Moody <pmoody@google.com>
Signed-off-by: default avatarJan Beulich <jbeulich@suse.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Link: http://lkml.kernel.org/r/5108E01902000078000BA9C5@nat28.tlf.novell.comSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Tested-by: default avatarPeter Moody <pmoody@google.com>
      40a1ef95
    • Linus Torvalds's avatar
      Merge branch 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 04c2eee5
      Linus Torvalds authored 
      Pull x86 EFI fixes from Peter Anvin:
 "This is a collection of fixes for the EFI support.  The controversial
  bit here is a set of patches which bumps the boot protocol version as
  part of fixing some serious problems with the EFI handover protocol,
  used when booting under EFI using a bootloader as opposed to directly
  from EFI.  These changes should also make it a lot saner to support
  cross-mode 32/64-bit EFI booting in the future.  Getting these changes
  into 3.8 means we avoid presenting an inconsistent ABI to bootloaders.

  Other changes are display detection and fixing efivarfs."

* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, efi: remove attribute check from setup_efi_pci
  x86, build: Dynamically find entry points in compressed startup code
  x86, efi: Fix PCI ROM handing in EFI boot stub, in 32-bit mode
  x86, efi: Fix 32-bit EFI handover protocol entry point
  x86, efi: Fix display detection in EFI boot stub
  x86, boot: Define the 2.12 bzImage boot protocol
  x86/boot: Fix minor fd leakage in tools/relocs.c
  x86, efi: Set runtime_version to the EFI spec revision
  x86, efi: fix 32-bit warnings in setup_efi_pci()
  efivarfs: Delete dentry from dcache in efivarfs_file_write()
  efivarfs: Never return ENOENT from firmware
  efi, x86: Pass a proper identity mapping in efi_call_phys_prelog
  efivarfs: Drop link count of the right inode
      04c2eee5
    • Linus Torvalds's avatar
      Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · bdb0ae6a
      Linus Torvalds authored 
      Pull x86 fixes from Peter Anvin:
 "This is a collection of miscellaneous fixes, the most important one is
  the fix for the Samsung laptop bricking issue (auto-blacklisting the
  samsung-laptop driver); the efi_enabled() changes you see below are
  prerequisites for that fix.

  The other issues fixed are booting on OLPC XO-1.5, an UV fix, NMI
  debugging, and requiring CAP_SYS_RAWIO for MSR references, just as
  with I/O port references."

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  samsung-laptop: Disable on EFI hardware
  efi: Make 'efi_enabled' a function to query EFI facilities
  smp: Fix SMP function call empty cpu mask race
  x86/msr: Add capabilities check
  x86/dma-debug: Bump PREALLOC_DMA_DEBUG_ENTRIES
  x86/olpc: Fix olpc-xo1-sci.c build errors
  arch/x86/platform/uv: Fix incorrect tlb flush all issue
  x86-64: Fix unwind annotations in recent NMI changes
  x86-32: Start out cr0 clean, disable paging before modifying cr3/4
      bdb0ae6a
    • Linus Torvalds's avatar
      Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux · 0fe94b9e
      Linus Torvalds authored 
      Pull console lockdep checking revert from Dave Airlie.

The lockdep splat this showed was interesting, but it's very very old,
and we won't be fixing it until 3.9.  In the meantime, undo the lockdep
annotation so that we don't generate the (known) console lockdep issue,
and then possibly hide any potential other (unknown) lockdep problems
that got disabled by the first one that triggered.

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  Revert "console: implement lockdep support for console_lock"
      0fe94b9e
    • Dave Airlie's avatar
      Revert "console: implement lockdep support for console_lock" · ff0d05bf
      Dave Airlie authored 
      This reverts commit daee7797.

I'll requeue this after the console locking fixes, so lockdep
is useful again for people until fbcon is fixed.
Signed-off-by: default avatarDave Airlie <airlied@redhat.com>
      ff0d05bf
  11. 30 Jan, 2013 2 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7