Pull ACPI fix from Rafael Wysocki:
 "This fixes an apparent, but actually artificial, resource conflict
  between the ACPI NVS memory region and the ACPI BERT (Boot Error
  Record Table) address range (Huang Ying)"

* tag 'acpi-extra-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: APEI: Fix BERT resources conflict with ACPI NVS area

Pull more power management updates deom Rafael Wysocki:
 "These fix two bugs introduced by recent power management updates (in
  the cpuidle menu governor and intel_pstate) and a few other issues,
  clean up things and remove unused code.

  Specifics:

   - Fix for a cpuidle menu governor problem that started to take an
     unnecessary spinlock after one of the recent updates and that did
     not play well with the RT patch (Rafael Wysocki).

   - Fix for the new intel_pstate operation mode switching feature added
     recently that did not reinitialize P-state limits properly when
     switching operation modes (Rafael Wysocki).

   - Removal of unused global notifiers from the PM QoS framework
     (Viresh Kumar).

   - Generic power domains framework update to make it handle
     asynchronous invocations of PM callbacks in the "noirq" phases of
     system suspend/hibernation correctly (Ulf Hansson).

   - Two hibernation core cleanups (Rafael Wysocki).

   - intel_idle cleanup related to the sysfs interface (Len Brown).

   - Off-by-one bug fix in the OPP (Operating Performance Points)
     framework (Andrzej Hajda).

   - OPP framework's documentation fix (Viresh Kumar).

   - cpufreq qoriq driver cleanup (Tang Yuantian).

   - Fixes for typos in comments in the device runtime PM framework
     (Christophe Jaillet)"

* tag 'pm-extra-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / OPP: Documentation: Fix opp-microvolt in examples
  intel_idle: stop exposing platform acronyms in sysfs
  cpufreq: intel_pstate: Fix limits issue with operation mode switching
  PM / hibernate: Define pr_fmt() and use pr_*() instead of printk()
  PM / hibernate: Untangle power_down()
  cpuidle: menu: Avoid taking spinlock for accessing QoS values
  PM / QoS: Remove global notifiers
  PM / runtime: Fix some typos
  cpufreq: qoriq: clean up unused code
  PM / OPP: fix off-by-one bug in dev_pm_opp_get_max_volt_latency loop
  PM / Domains: Power off masters immediately in the power off sequence
  PM / Domains: Rename is_async to one_dev_on for genpd_power_off()
  PM / Domains: Move genpd_power_off() above genpd_power_on()

Pull more btrfs updates from Chris Mason:
 "Btrfs round two.

  These are mostly a continuation of Dave Sterba's collection of
  cleanups, but Filipe also has some bug fixes and performance
  improvements"

* 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (69 commits)
  btrfs: add dummy callback for readpage_io_failed and drop checks
  btrfs: drop checks for mandatory extent_io_ops callbacks
  btrfs: document existence of extent_io ops callbacks
  btrfs: let writepage_end_io_hook return void
  btrfs: do proper error handling in btrfs_insert_xattr_item
  btrfs: handle allocation error in update_dev_stat_item
  btrfs: remove BUG_ON from __tree_mod_log_insert
  btrfs: derive maximum output size in the compression implementation
  btrfs: use predefined limits for calculating maximum number of pages for compression
  btrfs: export compression buffer limits in a header
  btrfs: merge nr_pages input and output parameter in compress_pages
  btrfs: merge length input and output parameter in compress_pages
  btrfs: constify name of subvolume in creation helpers
  btrfs: constify buffers used by compression helpers
  btrfs: constify input buffer of btrfs_csum_data
  btrfs: constify device path passed to relevant helpers
  btrfs: make btrfs_inode_resume_unlocked_dio take btrfs_inode
  btrfs: make btrfs_inode_block_unlocked_dio take btrfs_inode
  btrfs: Make btrfs_add_nondir take btrfs_inode
  btrfs: Make btrfs_add_link take btrfs_inode
  ...

* acpi-apei:
  ACPI: APEI: Fix BERT resources conflict with ACPI NVS area

* pm-cpuidle:
  intel_idle: stop exposing platform acronyms in sysfs
  cpuidle: menu: Avoid taking spinlock for accessing QoS values

* pm-cpufreq:
  cpufreq: intel_pstate: Fix limits issue with operation mode switching
  cpufreq: qoriq: clean up unused code

* pm-sleep:
  PM / hibernate: Define pr_fmt() and use pr_*() instead of printk()
  PM / hibernate: Untangle power_down()

* pm-core:
  PM / runtime: Fix some typos

* pm-qos:
  PM / QoS: Remove global notifiers

* pm-domains:
  PM / Domains: Power off masters immediately in the power off sequence
  PM / Domains: Rename is_async to one_dev_on for genpd_power_off()
  PM / Domains: Move genpd_power_off() above genpd_power_on()

* pm-opp:
  PM / OPP: Documentation: Fix opp-microvolt in examples
  PM / OPP: fix off-by-one bug in dev_pm_opp_get_max_volt_latency loop

Pull vfs pile two from Al Viro:

 - orangefs fix

 - series of fs/namei.c cleanups from me

 - VFS stuff coming from overlayfs tree

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  orangefs: Use RCU for destroy_inode
  vfs: use helper for calling f_op->fsync()
  mm: use helper for calling f_op->mmap()
  vfs: use helpers for calling f_op->{read,write}_iter()
  vfs: pass type instead of fn to do_{loop,iter}_readv_writev()
  vfs: extract common parts of {compat_,}do_readv_writev()
  vfs: wrap write f_ops with file_{start,end}_write()
  vfs: deny copy_file_range() for non regular files
  vfs: deny fallocate() on directory
  vfs: create vfs helper vfs_tmpfile()
  namei.c: split unlazy_walk()
  namei.c: fold the check for DCACHE_OP_REVALIDATE into d_revalidate()
  lookup_fast(): clean up the logics around the fallback to non-rcu mode
  namei: fold unlazy_link() into its sole caller

Pull vfs sendmsg updates from Al Viro:
 "More sendmsg work.

  This is a fairly separate isolated stuff (there's a continuation
  around lustre, but that one was too late to soak in -next), thus the
  separate pull request"

* 'work.sendmsg' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  ncpfs: switch to sock_sendmsg()
  ncpfs: don't mess with manually advancing iovec on send
  ncpfs: sendmsg does *not* bugger iovec these days
  ceph_tcp_sendpage(): use ITER_BVEC sendmsg
  afs_send_pages(): use ITER_BVEC
  rds: remove dead code
  ceph: switch to sock_recvmsg()
  usbip_recv(): switch to sock_recvmsg()
  iscsi_target: deal with short writes on the tx side
  [nbd] pass iov_iter to nbd_xmit()
  [nbd] switch sock_xmit() to sock_{send,recv}msg()
  [drbd] use sock_sendmsg()

Pull SCSI target updates from Nicholas Bellinger:
 "The highlights this round include:

   - enable dual mode (initiator + target) qla2xxx operation. (Quinn +
     Himanshu)

   - add a framework for qla2xxx async fabric discovery. (Quinn +
     Himanshu)

   - enable iscsi PDU DDP completion offload in cxgbit/T6 NICs. (Varun)

   - fix target-core handling of aborted failed commands. (Bart)

   - fix a long standing target-core issue NULL pointer dereference with
     active I/O LUN shutdown. (Rob Millner + Bryant + nab)"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (44 commits)
  target: Add counters for ABORT_TASK success + failure
  iscsi-target: Fix early login failure statistics misses
  target: Fix NULL dereference during LUN lookup + active I/O shutdown
  target: Delete tmr from list before processing
  target: Fix handling of aborted failed commands
  uapi: fix linux/target_core_user.h userspace compilation errors
  target: export protocol identifier
  qla2xxx: Fix a warning reported by the "smatch" static checker
  target/iscsi: Fix unsolicited data seq_end_offset calculation
  target/cxgbit: add T6 iSCSI DDP completion feature
  target/cxgbit: Enable DDP for T6 only if data sequence and pdu are in order
  target/cxgbit: Use T6 specific macros to get ETH/IP hdr len
  target/cxgbit: use cxgb4_tp_smt_idx() to get smt idx
  target/iscsi: split iscsit_check_dataout_hdr()
  target: Remove command flag CMD_T_DEV_ACTIVE
  target: Remove command flag CMD_T_BUSY
  target: Move session check from target_put_sess_cmd() into target_release_cmd_kref()
  target: Inline transport_cmd_check_stop()
  target: Remove an overly chatty debug message
  target: Stop execution if CMD_T_STOP has been set
  ...

Pull device mapper fixes from Mike Snitzer:

 - a dm-raid stable@ fix for possible corruption when triggering a raid
   reshape via lvm2; and an additional small patch ontop to bump version
   of the dm-raid target outside of the stable@ fix

 - a dm-raid fix for a 'dm-4.11-changes' regression introduced by a
   commit that was meant to only cleanup confusing branching.

* tag 'dm-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm raid: bump the target version
  dm raid: fix data corruption on reshape request
  dm raid: fix raid "check" regression due to improper cleanup in raid_message()

Pull vhost updates from Michael Tsirkin:
 "virtio, vhost: optimizations, fixes

  Looks like a quiet cycle for vhost/virtio, just a couple of minor
  tweaks. Most notable is automatic interrupt affinity for blk and scsi.
  Hopefully other devices are not far behind"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio-console: avoid DMA from stack
  vhost: introduce O(1) vq metadata cache
  virtio_scsi: use virtio IRQ affinity
  virtio_blk: use virtio IRQ affinity
  blk-mq: provide a default queue mapping for virtio device
  virtio: provide a method to get the IRQ affinity mask for a virtqueue
  virtio: allow drivers to request IRQ affinity when creating VQs
  virtio_pci: simplify MSI-X setup
  virtio_pci: don't duplicate the msix_enable flag in struct pci_dev
  virtio_pci: use shared interrupts for virtqueues
  virtio_pci: remove struct virtio_pci_vq_info
  vhost: try avoiding avail index access when getting descriptor
  virtio_mmio: expose header to userspace

Pull security subsystem fixes from James Morris:
 "Two fixes for the security subsystem:

   - keys: split both rcu_dereference_key() and user_key_payload() into
     versions which can be called with or without holding the key
     semaphore.

   - SELinux: fix Android init(8) breakage due to new cgroup security
     labeling support when using older policy"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  selinux: wrap cgroup seclabel support with its own policy capability
  KEYS: Differentiate uses of rcu_dereference_key() and user_key_payload()

Merge tag 'watchdog-for-linus-v4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull more watchdog updates from Guenter Roeck:

 - fix fallout from enabling COMPILE_TEST

 - fix gcc-4.3 build of kempld watchdog driver

 - use hrtimer in softdog

* tag 'watchdog-for-linus-v4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  watchdog: retu: restore MFD dependency
  watchdog: db8500: add back prmcu dependency
  watchdog: kempld: fix gcc-4.3 build
  watchdog: softdog: fire watchdog even if softirqs do not get to run
  watchdog: kempld: revert to full dependency
  watchdog: bcm2835: add CONFIG_OF dependency
  watchdog: sp805: add back AMBA dependency
  watchdog: menf21bmc: add I2C dependency
  watchdog: geode: restore hard CS5535_MFGPT dependency
  watchdog: wm831x watchdog really needs mfd

gcc-7 has an "optimization" pass that completely screws up, and
generates the code expansion for the (impossible) case of calling
ilog2() with a zero constant, even when the code gcc compiles does not
actually have a zero constant.

And we try to generate a compile-time error for anybody doing ilog2() on
a constant where that doesn't make sense (be it zero or negative).  So
now gcc7 will fail the build due to our sanity checking, because it
created that constant-zero case that didn't actually exist in the source
code.

There's a whole long discussion on the kernel mailing about how to work
around this gcc bug.  The gcc people themselevs have discussed their
"feature" in

   https://gcc.gnu.org/bugzilla/show_bug.cgi?id=72785

but it's all water under the bridge, because while it looked at one
point like it would be solved by the time gcc7 was released, that was
not to be.

So now we have to deal with this compiler braindamage.

And the only simple approach seems to be to just delete the code that
tries to warn about bad uses of ilog2().

So now "ilog2()" will just return 0 not just for the value 1, but for
any non-positive value too.

It's not like I can recall anybody having ever actually tried to use
this function on any invalid value, but maybe the sanity check just
meant that such code never made it out in public.
Reported-by: Laura Abbott <labbott@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>,
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Overlayfs-related series from Miklos and Amir

freeing of inodes must be RCU-delayed on all filesystems

Cc: stable@vger.kernel.org
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull objtool relocation fixes from Ingo Molnar:
 "Two fixes related to the module loading regression introduced by the
  recent objtool changes"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool, modules: Discard objtool annotation sections for modules
  objtool, compiler.h: Fix __unreachable section relocation size

Pull NFS client updates from Anna Schumaker:
 "Highlights include:

  Stable bugfixes:
   - NFSv4: Fix memory and state leak in _nfs4_open_and_get_state
   - xprtrdma: Fix Read chunk padding
   - xprtrdma: Per-connection pad optimization
   - xprtrdma: Disable pad optimization by default
   - xprtrdma: Reduce required number of send SGEs
   - nlm: Ensure callback code also checks that the files match
   - pNFS/flexfiles: If the layout is invalid, it must be updated before
     retrying
   - NFSv4: Fix reboot recovery in copy offload
   - Revert "NFSv4.1: Handle NFS4ERR_BADSESSION/NFS4ERR_DEADSESSION
     replies to OP_SEQUENCE"
   - NFSv4: fix getacl head length estimation
   - NFSv4: fix getacl ERANGE for sum ACL buffer sizes

  Features:
   - Add and use dprintk_cont macros
   - Various cleanups to NFS v4.x to reduce code duplication and
     complexity
   - Remove unused cr_magic related code
   - Improvements to sunrpc "read from buffer" code
   - Clean up sunrpc timeout code and allow changing TCP timeout
     parameters
   - Remove duplicate mw_list management code in xprtrdma
   - Add generic functions for encoding and decoding xdr streams

  Bugfixes:
   - Clean up nfs_show_mountd_netid
   - Make layoutreturn_ops static and use NULL instead of 0 to fix
     sparse warnings
   - Properly handle -ERESTARTSYS in nfs_rename()
   - Check if register_shrinker() failed during rpcauth_init()
   - Properly clean up procfs/pipefs entries
   - Various NFS over RDMA related fixes
   - Silence unititialized variable warning in sunrpc"

* tag 'nfs-for-4.11-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (64 commits)
  NFSv4: fix getacl ERANGE for some ACL buffer sizes
  NFSv4: fix getacl head length estimation
  Revert "NFSv4.1: Handle NFS4ERR_BADSESSION/NFS4ERR_DEADSESSION replies to OP_SEQUENCE"
  NFSv4: Fix reboot recovery in copy offload
  pNFS/flexfiles: If the layout is invalid, it must be updated before retrying
  NFSv4: Clean up owner/group attribute decode
  SUNRPC: Add a helper function xdr_stream_decode_string_dup()
  NFSv4: Remove bogus "struct nfs_client" argument from decode_ace()
  NFSv4: Fix the underestimation of delegation XDR space reservation
  NFSv4: Replace callback string decode function with a generic
  NFSv4: Replace the open coded decode_opaque_inline() with the new generic
  NFSv4: Replace ad-hoc xdr encode/decode helpers with xdr_stream_* generics
  SUNRPC: Add generic helpers for xdr_stream encode/decode
  sunrpc: silence uninitialized variable warning
  nlm: Ensure callback code also checks that the files match
  sunrpc: Allow xprt->ops->timer method to sleep
  xprtrdma: Refactor management of mw_list field
  xprtrdma: Handle stale connection rejection
  xprtrdma: Properly recover FRWRs with in-flight FASTREG WRs
  xprtrdma: Shrink send SGEs array
  ...

Pull f2fs updates from Jaegeuk Kim:
 "This round introduces several interesting features such as on-disk NAT
  bitmaps, IO alignment, and a discard thread. And it includes a couple
  of major bug fixes as below.

  Enhancements:

   - introduce on-disk bitmaps to avoid scanning NAT blocks when getting
     free nids

   - support IO alignment to prepare open-channel SSD integration in
     future

   - introduce a discard thread to avoid long latency during checkpoint
     and fstrim

   - use SSR for warm node and enable inline_xattr by default

   - introduce in-memory bitmaps to check FS consistency for debugging

   - improve write_begin by avoiding needless read IO

  Bug fixes:

   - fix broken zone_reset behavior for SMR drive

   - fix wrong victim selection policy during GC

   - fix missing behavior when preparing discard commands

   - fix bugs in atomic write support and fiemap

   - workaround to handle multiple f2fs_add_link calls having same name

  ... and it includes a bunch of clean-up patches as well"

* tag 'for-f2fs-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (97 commits)
  f2fs: avoid to flush nat journal entries
  f2fs: avoid to issue redundant discard commands
  f2fs: fix a plint compile warning
  f2fs: add f2fs_drop_inode tracepoint
  f2fs: Fix zoned block device support
  f2fs: remove redundant set_page_dirty()
  f2fs: fix to enlarge size of write_io_dummy mempool
  f2fs: fix memory leak of write_io_dummy mempool during umount
  f2fs: fix to update F2FS_{CP_}WB_DATA count correctly
  f2fs: use MAX_FREE_NIDS for the free nids target
  f2fs: introduce free nid bitmap
  f2fs: new helper cur_cp_crc() getting crc in f2fs_checkpoint
  f2fs: update the comment of default nr_pages to skipping
  f2fs: drop the duplicate pval in f2fs_getxattr
  f2fs: Don't update the xattr data that same as the exist
  f2fs: kill __is_extent_same
  f2fs: avoid bggc->fggc when enough free segments are avaliable after cp
  f2fs: select target segment with closer temperature in SSR mode
  f2fs: show simple call stack in fault injection message
  f2fs: no need lock_op in f2fs_write_inline_data
  ...

put_chars() stuffs the buffer it gets into an sg, but that buffer may be
on the stack. This breaks with CONFIG_VMAP_STACK=y (for me, it
manifested as printks getting turned into NUL bytes).
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>

When device IOTLB is enabled, all address translations were stored in
interval tree. O(lgN) searching time could be slow for virtqueue
metadata (avail, used and descriptors) since they were accessed much
often than other addresses. So this patch introduces an O(1) array
which points to the interval tree nodes that store the translations of
vq metadata. Those array were update during vq IOTLB prefetching and
were reset during each invalidation and tlb update. Each time we want
to access vq metadata, this small array were queried before interval
tree. This would be sufficient for static mappings but not dynamic
mappings, we could do optimizations on top.

Test were done with l2fwd in guest (2M hugepage):

   noiommu  | before        | after
tx 1.32Mpps | 1.06Mpps(82%) | 1.30Mpps(98%)
rx 2.33Mpps | 1.46Mpps(63%) | 2.29Mpps(98%)

We can almost reach the same performance as noiommu mode.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

commit 1ea0ce40 ("selinux: allow
changing labels for cgroupfs") broke the Android init program,
which looks up security contexts whenever creating directories
and attempts to assign them via setfscreatecon().
When creating subdirectories in cgroup mounts, this would previously
be ignored since cgroup did not support userspace setting of security
contexts.  However, after the commit, SELinux would attempt to honor
the requested context on cgroup directories and fail due to permission
denial.  Avoid breaking existing userspace/policy by wrapping this change
with a conditional on a new cgroup_seclabel policy capability.  This
preserves existing behavior until/unless a new policy explicitly enables
this capability.
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>

rcu_dereference_key() and user_key_payload() are currently being used in
two different, incompatible ways:

 (1) As a wrapper to rcu_dereference() - when only the RCU read lock used
     to protect the key.

 (2) As a wrapper to rcu_dereference_protected() - when the key semaphor is
     used to protect the key and the may be being modified.

Fix this by splitting both of the key wrappers to produce:

 (1) RCU accessors for keys when caller has the key semaphore locked:

	dereference_key_locked()
	user_key_payload_locked()

 (2) RCU accessors for keys when caller holds the RCU read lock:

	dereference_key_rcu()
	user_key_payload_rcu()

This should fix following warning in the NFS idmapper

  ===============================
  [ INFO: suspicious RCU usage. ]
  4.10.0 #1 Tainted: G        W
  -------------------------------
  ./include/keys/user-type.h:53 suspicious rcu_dereference_protected() usage!
  other info that might help us debug this:
  rcu_scheduler_active = 2, debug_locks = 0
  1 lock held by mount.nfs/5987:
    #0:  (rcu_read_lock){......}, at: [<d000000002527abc>] nfs_idmap_get_key+0x15c/0x420 [nfsv4]
  stack backtrace:
  CPU: 1 PID: 5987 Comm: mount.nfs Tainted: G        W       4.10.0 #1
  Call Trace:
    dump_stack+0xe8/0x154 (unreliable)
    lockdep_rcu_suspicious+0x140/0x190
    nfs_idmap_get_key+0x380/0x420 [nfsv4]
    nfs_map_name_to_uid+0x2a0/0x3b0 [nfsv4]
    decode_getfattr_attrs+0xfac/0x16b0 [nfsv4]
    decode_getfattr_generic.constprop.106+0xbc/0x150 [nfsv4]
    nfs4_xdr_dec_lookup_root+0xac/0xb0 [nfsv4]
    rpcauth_unwrap_resp+0xe8/0x140 [sunrpc]
    call_decode+0x29c/0x910 [sunrpc]
    __rpc_execute+0x140/0x8f0 [sunrpc]
    rpc_run_task+0x170/0x200 [sunrpc]
    nfs4_call_sync_sequence+0x68/0xa0 [nfsv4]
    _nfs4_lookup_root.isra.44+0xd0/0xf0 [nfsv4]
    nfs4_lookup_root+0xe0/0x350 [nfsv4]
    nfs4_lookup_root_sec+0x70/0xa0 [nfsv4]
    nfs4_find_root_sec+0xc4/0x100 [nfsv4]
    nfs4_proc_get_rootfh+0x5c/0xf0 [nfsv4]
    nfs4_get_rootfh+0x6c/0x190 [nfsv4]
    nfs4_server_common_setup+0xc4/0x260 [nfsv4]
    nfs4_create_server+0x278/0x3c0 [nfsv4]
    nfs4_remote_mount+0x50/0xb0 [nfsv4]
    mount_fs+0x74/0x210
    vfs_kern_mount+0x78/0x220
    nfs_do_root_mount+0xb0/0x140 [nfsv4]
    nfs4_try_mount+0x60/0x100 [nfsv4]
    nfs_fs_mount+0x5ec/0xda0 [nfs]
    mount_fs+0x74/0x210
    vfs_kern_mount+0x78/0x220
    do_mount+0x254/0xf70
    SyS_mount+0x94/0x100
    system_call+0x38/0xe0
Reported-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>

The triplet present in "opp-microvolt" property should be in the order
<target min max>, while all the examples have it in the order
<min target max>.

Fix it.

Luckily all of the users of "opp-microvolt" property have applied brain
instead of copying the examples from documentation and none of the
actual dts files have it wrong.
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The '__unreachable' and '__func_stack_frame_non_standard' sections are
only used at compile time.  They're discarded for vmlinux but they
should also be discarded for modules.

Since this is a recurring pattern, prefix the section names with
".discard.".  It's a nice convention and vmlinux.lds.h already discards
such sections.

Also remove the 'a' (allocatable) flag from the __unreachable section
since it doesn't make sense for a discarded section.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jessica Yu <jeyu@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: d1091c7f ("objtool: Improve detection of BUG() and other dead ends")
Link: http://lkml.kernel.org/r/20170301180444.lhd53c5tibc4ns77@trebleSigned-off-by: Ingo Molnar <mingo@kernel.org>

Pull arm64 fixes from Will Deacon:
 "The main fix here addresses a kernel panic triggered on Qualcomm
  QDF2400 due to incorrect register usage in an erratum workaround
  introduced during the merge window.

  Summary:

   - Fix kernel panic on specific Qualcomm platform due to broken
     erratum workaround

   - Revert contiguous bit support due to TLB conflict aborts in
     simulation

   - Don't treat all CPU ID register fields as 4-bit quantities"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64/cpufeature: check correct field width when updating sys_val
  Revert "arm64: mm: set the contiguous bit for kernel mappings where appropriate"
  arm64: Avoid clobbering mm in erratum workaround on QDF2400

Pull more powerpc updates from Michael Ellerman:
 "Highlights include:

   - an update of the disassembly code used by xmon to the latest
     versions in binutils. We've received permission from all the
     authors of the relevant binutils changes to relicense their changes
     to the relevant files from GPLv3 to GPLv2, for inclusion in Linux.
     Thanks to Peter Bergner for doing the leg work to get permission
     from everyone.

   - addition of the "architected" Power9 CPU table entry, allowing us
     to boot in Power9 architected mode under a hypervisor.

   - updates to the Power9 PMU code.

   - implementation of clear_bit_unlock_is_negative_byte() to optimise
     unlock_page().

   - Freescale updates from Scott: "Highlights include 8xx breakpoints
     and perf, t1042rdb display support, and board updates."

  Thanks to:
    Al Viro, Andrew Donnellan, Aneesh Kumar K.V, Balbir Singh, Douglas
    Miller, Frédéric Weisbecker, Gavin Shan, Madhavan Srinivasan,
    Michael Roth, Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Peter
    Bergner, Paul E. McKenney, Rashmica Gupta, Russell Currey, Sahil
    Mehta, Stewart Smith"

* tag 'powerpc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (48 commits)
  powerpc: Remove leftover cputime_to_nsecs call causing build error
  powerpc/mm/hash: Always clear UPRT and Host Radix bits when setting up CPU
  powerpc/optprobes: Fix TOC handling in optprobes trampoline
  powerpc/pseries: Advertise Hot Plug Event support to firmware
  cxl: fix nested locking hang during EEH hotplug
  powerpc/xmon: Dump memory in CPU endian format
  powerpc/pseries: Revert 'Auto-online hotplugged memory'
  powerpc/powernv: Make PCI non-optional
  powerpc/64: Implement clear_bit_unlock_is_negative_byte()
  powerpc/powernv: Remove unused variable in pnv_pci_sriov_disable()
  powerpc/kernel: Remove error message in pcibios_setup_phb_resources()
  powerpc/mm: Fix typo in set_pte_at()
  pci/hotplug/pnv-php: Disable MSI and PCI device properly
  pci/hotplug/pnv-php: Disable surprise hotplug capability on conflicts
  pci/hotplug/pnv-php: Remove WARN_ON() in pnv_php_put_slot()
  powerpc: Add POWER9 architected mode to cputable
  powerpc/perf: use is_kernel_addr macro in perf_get_misc_flags()
  powerpc/perf: Avoid FAB_*_MATCH checks for power9
  powerpc/perf: Add restrictions to PMC5 in power9 DD1
  powerpc/perf: Use Instruction Counter value
  ...

INPUT_PROP_BUTTONPAD is currently only set through the platform data.
The RMI4 header doc says that this property is there to force the
buttonpad property, so we also need to detect it by looking at
the exported buttons count.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull sound fixes from Takashi Iwai:
 "A few last-minute fixes for rc1:

   - ALSA core timer and sequencer fixes for bugs spotted by syzkaller

   - a couple of trivial HD-audio fixups

   - additional PCI / codec IDs for Intel Geminilake

   - fixes for CT-XFi DMA mask bugs"

* tag 'sound-fix-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: seq: Fix link corruption by event error handling
  ALSA: hda - Add subwoofer support for Dell Inspiron 17 7000 Gaming
  ALSA: ctxfi: Fallback DMA mask to 32bit
  ALSA: timer: Reject user params with too small ticks
  ALSA: hda: Add Geminilake HDMI codec ID
  ALSA: hda - Fix micmute hotkey problem for a lenovo AIO machine
  ALSA: hda - Add Geminilake PCI ID

Pull thermal management updates from Zhang Rui:

 - add thermal driver for R-Car Gen3 thermal sensors.

 - add thermal driver for ZTE' zx2967 family thermal sensors.

 - convert thermal ID allocation from IDR to IDA.

 - fix a possible NULL dereference in imx thermal driver.

 - fix a ti-soc-thermal driver dependency issue so that critical thermal
   control is still available when CPU_THERMAL is not defined.

 - update binding information for QorIQ thermal driver.

 - a couple of cleanups in thermal core, intel_powerclamp, exynos,
   dra752-thermal, mtk-thermal driver.

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  powerpc/mpc85xx: Update TMU device tree node for T1023/T1024
  powerpc/mpc85xx: Update TMU device tree node for T1040/T1042
  dt-bindings: Update QorIQ TMU thermal bindings
  thermal: mtk_thermal: Staticise a number of data variables
  thermal: arm: dra752: Remove all TSHUT related definitions
  thermal: arm: dra752: Remove TSHUT configuration
  thermal: ti-soc-thermal: Remove CPU_THERMAL Dependency from TI_THERMAL
  thermal: imx: Fix possible NULL dereference.
  thermal: exynos: Remove parsing unused samsung,tmu_cal_mode property
  thermal: zx2967: add thermal driver for ZTE's zx2967 family
  thermal: use cpumask_var_t for on-stack cpu masks
  dt: bindings: add documentation for zx2967 family thermal sensor
  thermal/intel_powerclamp: Remove set-but-not-used variables
  thermal: rcar_gen3_thermal: Add R-Car Gen3 thermal driver
  thermal: rcar_gen3_thermal: Document the R-Car Gen3
  thermal: convert devfreq_cooling to use an IDA
  thermal: convert cpu_cooling to use an IDA
  thermal: convert clock cooling to use an IDA
  thermal core: convert ID allocation to IDA

Merge tag 'pwm/for-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "This set contains mostly fixes to existing drivers as well as cleanup
  of code that's not been in active use for a while"

* tag 'pwm/for-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (27 commits)
  acpi: lpss: call pwm_add_table() for BSW PWM device
  pwm: Try to load modules during pwm_get()
  pwm: Don't hold pwm_lookup_lock longer than necessary
  pwm: Make the PWM_POLARITY flag in DTB optional
  pwm: Print error messages with pr_err() instead of pr_debug()
  pwm: imx: Add polarity inversion support to i.MX's PWMv2
  pwm: imx: doc: Update imx-pwm.txt documentation entry
  pwm: imx: Remove redundant i.MX PWMv2 code
  pwm: imx: Provide atomic PWM support for i.MX PWMv2
  pwm: imx: Move PWMv2 wait for fifo slot code to a separate function
  pwm: imx: Move PWMv2 software reset code to a separate function
  pwm: imx: Rewrite v1 code to facilitate switch to atomic PWM
  pwm: imx: Add separate set of PWM ops for v1 and v2
  pwm: imx: Remove ipg clock and enable per clock when required
  pwm: lpss: Add Intel Gemini Lake PCI ID
  pwm: lpss: Do not export board infos for different PWM types
  pwm: lpss: Avoid reconfiguring while UPDATE bit is still enabled
  pwm: lpss: Switch to new atomic API
  pwm: lpss: Allow duty cycle to be 0
  pwm: lpss: Avoid potential overflow of base_unit
  ...

Pull drm AST2500 support from Dave Airlie:
 "This is a set of changes to enable the AST2500 BMC hardware, and also
  fix some bugs interacting with the older AST hardware.

  Some of the bug fixes are cc'ed to stable"

* tag 'drm-ast-2500-for-v4.11' of git://people.freedesktop.org/~airlied/linux:
  drm/ast: Call open_key before enable_mmio in POST code
  drm/ast: Fix test for VGA enabled
  drm/ast: POST code for the new AST2500
  drm/ast: Rename ast_init_dram_2300 to ast_post_chip_2300
  drm/ast: Factor mmc_test code in POST code
  drm/ast: Fixed vram size incorrect issue on POWER
  drm/ast: Base support for AST2500
  drm/ast: Fix calculation of MCLK
  drm/ast: Remove spurious include
  drm/ast: const'ify mode setting tables
  drm/ast: Handle configuration without P2A bridge
  drm/ast: Fix AST2400 POST failure without BMC FW or VBIOS

Pull drm fixes from Dave Airlie:
 "Misc fixes for v4.11-rc1.

  This is a selection of fixes for recent bugs, the vmwgfx one is
  important to avoid a regression, and compat ioctl one is pretty urgent
  for stable. Otherwise nothing too much.

  I've got a separate pull req for some AST hw IBM need to enable"

* tag 'drm-fixes-for-v4.11-rc1' of git://people.freedesktop.org/~airlied/linux:
  dma-buf: add support for compat ioctl
  drm/vmwgfx: Work around drm removal of control nodes
  drm/rockchip: cdn-dp: Fix error handling
  drm/rockchip: add extcon dependency for DP
  drm: zte: fix static checker warning on variable 'fmt'

The retu watchdog calls into the respective mfd driver, but fails to
link if that is diabled:

drivers/watchdog/built-in.o: In function `retu_wdt_set_timeout':
ziirave_wdt.c:(.text+0x8c88): undefined reference to `retu_write'
ziirave_wdt.c:(.text+0x8c88): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `retu_write'
drivers/watchdog/built-in.o: In function `retu_wdt_start':
ziirave_wdt.c:(.text+0x8cc8): undefined reference to `retu_write'
ziirave_wdt.c:(.text+0x8cc8): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `retu_write'

This restores the dependency as it was before

Fixes: da2a68b3 ("watchdog: Enable COMPILE_TEST where possible")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

When the db8500 watchdog is enabled without the PRCMU, we get a lot of
warnings about duplicate or missing helper functions:

In file included from drivers/watchdog/ux500_wdt.c:21:0:
include/linux/mfd/dbx500-prcmu.h:422:19: error: redefinition of 'prcmu_abb_read'
 static inline int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)

This restores the dependency as it was.

Fixes: da2a68b3 ("watchdog: Enable COMPILE_TEST where possible")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

gcc-4.3 can't decide whether the constant value in
kempld_prescaler[PRESCALER_21] is built-time constant or
not, and gets confused by the logic in do_div():

drivers/watchdog/kempld_wdt.o: In function `kempld_wdt_set_stage_timeout':
kempld_wdt.c:(.text.kempld_wdt_set_stage_timeout+0x130): undefined reference to `__aeabi_uldivmod'

This adds a call to ACCESS_ONCE() to force it to not consider
it to be constant, and leaves the more efficient normal case
in place for modern compilers, using an #ifdef to annotate
why we do this hack.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Checking for timer expiration is done from the softirq TIMER_SOFTIRQ.

Since commit 4cd13c21 ("softirq: Let ksoftirqd do its job"),
pending softirqs are no longer always handled immediately, instead,
if there are pending softirqs, and ksoftirqd is in state TASK_RUNNING,
the handling of the softirqs are deferred, and are instead supposed
to be handled by ksoftirqd, when ksoftirqd gets scheduled.

If a user space process with a real-time policy starts to misbehave
by never relinquishing the CPU while ksoftirqd is in state TASK_RUNNING,
what will happen is that all softirqs will get deferred, while ksoftirqd,
which is supposed to handle the deferred softirqs, will never get to run.

To make sure that the watchdog is able to fire even when we do not get
to run softirqs, replace the timers with hrtimers.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

The kempld watchdog driver requires the respective MFD driver:

drivers/watchdog/built-in.o: In function `kempld_wdt_probe':
kempld_wdt.c:(.text+0x5c78): undefined reference to `kempld_get_mutex'
kempld_wdt.c:(.text+0x5c84): undefined reference to `kempld_read8'
kempld_wdt.c:(.text+0x5c8e): undefined reference to `kempld_release_mutex'
kempld_wdt.c:(.text+0x5d1c): undefined reference to `kempld_read8'
kempld_wdt.c:(.text+0x5d2c): undefined reference to `kempld_write8'

This adds the Kconfig dependency back.

Fixes: da2a68b3 ("watchdog: Enable COMPILE_TEST where possible")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Without CONFIG_OF, the driver fails to link:

drivers/watchdog/built-in.o: In function `bcm2835_power_off':
bcm2835_wdt.c:(.text+0x1946): undefined reference to `of_find_device_by_node'

This adds a new dependency, to allow the COMPILE_TEST check to succeed.

Fixes: da2a68b3 ("watchdog: Enable COMPILE_TEST where possible")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>