commit ca9b590c upstream.

The current code decreases from the mss size (which is the gso_size
from the kernel skb) the size of the packet headers.

It shouldn't do that because the mss that comes from the stack
(e.g IPoIB) includes only the tcp payload without the headers.

The result is indication to the HW that each packet that the HW sends
is smaller than what it could be, and too many packets will be sent
for big messages.

An easy way to demonstrate one more aspect of the problem is by
configuring the ipoib mtu to be less than 2*hlen (2*56) and then
run app sending big TCP messages. This will tell the HW to send packets
with giant (negative value which under unsigned arithmetics becomes
a huge positive one) length and the QP moves to SQE state.

Fixes: b832be1e ('IB/mlx4: Add IPoIB LSO support')
Reported-by: Matthew Finlay <matt@mellanox.com>
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 66578b0b upstream.

In a call to ib_umem_get(), if address is 0x0 and size is
already page aligned, check added in commit 8494057a
("IB/uverbs: Prevent integer overflow in ib_umem_get address
arithmetic") will refuse to register a memory region that
could otherwise be valid (provided vm.mmap_min_addr sysctl
and mmap_low_allowed SELinux knobs allow userspace to map
something at address 0x0).

This patch allows back such registration: ib_umem_get()
should probably don't care of the base address provided it
can be pinned with get_user_pages().

There's two possible overflows, in (addr + size) and in
PAGE_ALIGN(addr + size), this patch keep ensuring none
of them happen while allowing to pin memory at address
0x0. Anyway, the case of size equal 0 is no more (partially)
handled as 0-length memory region are disallowed by an
earlier check.

Link: http://mid.gmane.org/cover.1428929103.git.ydroneaud@opteya.com
Cc: Shachar Raindel <raindel@mellanox.com>
Cc: Jack Morgenstein <jackm@mellanox.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 8abaae62 upstream.

If ib_umem_get() is called with a size equal to 0 and an
non-page aligned address, one page will be pinned and a
0-sized umem will be returned to the caller.

This should not be allowed: it's not expected for a memory
region to have a size equal to 0.

This patch adds a check to explicitly refuse to register
a 0-sized region.

Link: http://mid.gmane.org/cover.1428929103.git.ydroneaud@opteya.com
Cc: Shachar Raindel <raindel@mellanox.com>
Cc: Jack Morgenstein <jackm@mellanox.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit a87938b2 upstream.

With CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE enabled, and a normal top-down
address allocation strategy, load_elf_binary() will attempt to map a PIE
binary into an address range immediately below mm->mmap_base.

Unfortunately, load_elf_ binary() does not take account of the need to
allocate sufficient space for the entire binary which means that, while
the first PT_LOAD segment is mapped below mm->mmap_base, the subsequent
PT_LOAD segment(s) end up being mapped above mm->mmap_base into the are
that is supposed to be the "gap" between the stack and the binary.

Since the size of the "gap" on x86_64 is only guaranteed to be 128MB this
means that binaries with large data segments > 128MB can end up mapping
part of their data segment over their stack resulting in corruption of the
stack (and the data segment once the binary starts to run).

Any PIE binary with a data segment > 128MB is vulnerable to this although
address randomization means that the actual gap between the stack and the
end of the binary is normally greater than 128MB.  The larger the data
segment of the binary the higher the probability of failure.

Fix this by calculating the total size of the binary in the same way as
load_elf_interp().
Signed-off-by: Michael Davidson <md@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 2b876010 upstream.

ACPICA commit aacf863cfffd46338e268b7415f7435cae93b451

It is reported that on a physically 64-bit addressed machine, 32-bit kernel
can trigger crashes in accessing the memory regions that are beyond the
32-bit boundary. The region field's start address should still be 32-bit
compliant, but after a calculation (adding some offsets), it may exceed the
32-bit boundary. This case is rare and buggy, but there are real BIOSes
leaked with such issues (see References below).

This patch fixes this gap by always defining IO addresses as 64-bit, and
allows OSPMs to optimize it for a real 32-bit machine to reduce the size of
the internal objects.

Internal acpi_physical_address usages in the structures that can be fixed
by this change include:
 1. struct acpi_object_region:
    acpi_physical_address		address;
 2. struct acpi_address_range:
    acpi_physical_address		start_address;
    acpi_physical_address		end_address;
 3. struct acpi_mem_space_context;
    acpi_physical_address		address;
 4. struct acpi_table_desc
    acpi_physical_address		address;
See known issues 1 for other usages.

Note that acpi_io_address which is used for ACPI_PROCESSOR may also suffer
from same problem, so this patch changes it accordingly.

For iasl, it will enforce acpi_physical_address as 32-bit to generate
32-bit OSPM compatible tables on 32-bit platforms, we need to define
ACPI_32BIT_PHYSICAL_ADDRESS for it in acenv.h.

Known issues:
 1. Cleanup of mapped virtual address
   In struct acpi_mem_space_context, acpi_physical_address is used as a virtual
   address:
    acpi_physical_address                   mapped_physical_address;
   It is better to introduce acpi_virtual_address or use acpi_size instead.
   This patch doesn't make such a change. Because this should be done along
   with a change to acpi_os_map_memory()/acpi_os_unmap_memory().
   There should be no functional problem to leave this unchanged except
   that only this structure is enlarged unexpectedly.

Link: https://github.com/acpica/acpica/commit/aacf863c
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=87971
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=79501Reported-and-tested-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reported-and-tested-by: Sial Nije <sialnije@gmail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 9a5cbce4 upstream.

We cap 32bit userspace backtraces to PERF_MAX_STACK_DEPTH
(currently 127), but we forgot to do the same for 64bit backtraces.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit ccccf3d6 upstream.

If we attempt to clone a 0 length region into a file we can end up
inserting a range in the inode's extent_io tree with a start offset
that is greater then the end offset, which triggers immediately the
following warning:

[ 3914.619057] WARNING: CPU: 17 PID: 4199 at fs/btrfs/extent_io.c:435 insert_state+0x4b/0x10b [btrfs]()
[ 3914.620886] BTRFS: end < start 4095 4096
(...)
[ 3914.638093] Call Trace:
[ 3914.638636]  [<ffffffff81425fd9>] dump_stack+0x4c/0x65
[ 3914.639620]  [<ffffffff81045390>] warn_slowpath_common+0xa1/0xbb
[ 3914.640789]  [<ffffffffa03ca44f>] ? insert_state+0x4b/0x10b [btrfs]
[ 3914.642041]  [<ffffffff810453f0>] warn_slowpath_fmt+0x46/0x48
[ 3914.643236]  [<ffffffffa03ca44f>] insert_state+0x4b/0x10b [btrfs]
[ 3914.644441]  [<ffffffffa03ca729>] __set_extent_bit+0x107/0x3f4 [btrfs]
[ 3914.645711]  [<ffffffffa03cb256>] lock_extent_bits+0x65/0x1bf [btrfs]
[ 3914.646914]  [<ffffffff8142b2fb>] ? _raw_spin_unlock+0x28/0x33
[ 3914.648058]  [<ffffffffa03cbac4>] ? test_range_bit+0xcc/0xde [btrfs]
[ 3914.650105]  [<ffffffffa03cb3c3>] lock_extent+0x13/0x15 [btrfs]
[ 3914.651361]  [<ffffffffa03db39e>] lock_extent_range+0x3d/0xcd [btrfs]
[ 3914.652761]  [<ffffffffa03de1fe>] btrfs_ioctl_clone+0x278/0x388 [btrfs]
[ 3914.654128]  [<ffffffff811226dd>] ? might_fault+0x58/0xb5
[ 3914.655320]  [<ffffffffa03e0909>] btrfs_ioctl+0xb51/0x2195 [btrfs]
(...)
[ 3914.669271] ---[ end trace 14843d3e2e622fc1 ]---

This later makes the inode eviction handler enter an infinite loop that
keeps dumping the following warning over and over:

[ 3915.117629] WARNING: CPU: 22 PID: 4228 at fs/btrfs/extent_io.c:435 insert_state+0x4b/0x10b [btrfs]()
[ 3915.119913] BTRFS: end < start 4095 4096
(...)
[ 3915.137394] Call Trace:
[ 3915.137913]  [<ffffffff81425fd9>] dump_stack+0x4c/0x65
[ 3915.139154]  [<ffffffff81045390>] warn_slowpath_common+0xa1/0xbb
[ 3915.140316]  [<ffffffffa03ca44f>] ? insert_state+0x4b/0x10b [btrfs]
[ 3915.141505]  [<ffffffff810453f0>] warn_slowpath_fmt+0x46/0x48
[ 3915.142709]  [<ffffffffa03ca44f>] insert_state+0x4b/0x10b [btrfs]
[ 3915.143849]  [<ffffffffa03ca729>] __set_extent_bit+0x107/0x3f4 [btrfs]
[ 3915.145120]  [<ffffffffa038c1e3>] ? btrfs_kill_super+0x17/0x23 [btrfs]
[ 3915.146352]  [<ffffffff811548f6>] ? deactivate_locked_super+0x3b/0x50
[ 3915.147565]  [<ffffffffa03cb256>] lock_extent_bits+0x65/0x1bf [btrfs]
[ 3915.148785]  [<ffffffff8142b7e2>] ? _raw_write_unlock+0x28/0x33
[ 3915.149931]  [<ffffffffa03bc325>] btrfs_evict_inode+0x196/0x482 [btrfs]
[ 3915.151154]  [<ffffffff81168904>] evict+0xa0/0x148
[ 3915.152094]  [<ffffffff811689e5>] dispose_list+0x39/0x43
[ 3915.153081]  [<ffffffff81169564>] evict_inodes+0xdc/0xeb
[ 3915.154062]  [<ffffffff81154418>] generic_shutdown_super+0x49/0xef
[ 3915.155193]  [<ffffffff811546d1>] kill_anon_super+0x13/0x1e
[ 3915.156274]  [<ffffffffa038c1e3>] btrfs_kill_super+0x17/0x23 [btrfs]
(...)
[ 3915.167404] ---[ end trace 14843d3e2e622fc2 ]---

So just bail out of the clone ioctl if the length of the region to clone
is zero, without locking any extent range, in order to prevent this issue
(same behaviour as a pwrite with a 0 length for example).

This is trivial to reproduce. For example, the steps for the test I just
made for fstests:

  mkfs.btrfs -f SCRATCH_DEV
  mount SCRATCH_DEV $SCRATCH_MNT

  touch $SCRATCH_MNT/foo
  touch $SCRATCH_MNT/bar

  $CLONER_PROG -s 0 -d 4096 -l 0 $SCRATCH_MNT/foo $SCRATCH_MNT/bar
  umount $SCRATCH_MNT

A test case for fstests follows soon.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit d7441949 upstream.

Sebastian reported a crash caused by a jump label mismatch after resume.
This happens because we do not save the kernel text section during suspend
and therefore also do not restore it during resume, but use the kernel image
that restores the old system.

This means that after a suspend/resume cycle we lost all modifications done
to the kernel text section.
The reason for this is the pfn_is_nosave() function, which incorrectly
returns that read-only pages don't need to be saved. This is incorrect since
we mark the kernel text section read-only.
We still need to make sure to not save and restore pages contained within
NSS and DCSS segment.
To fix this add an extra case for the kernel text section and only save
those pages if they are not contained within an NSS segment.

Fixes the following crash (and the above bugs as well):

Jump label code mismatch at netif_receive_skb_internal+0x28/0xd0
Found:    c0 04 00 00 00 00
Expected: c0 f4 00 00 00 11
New:      c0 04 00 00 00 00
Kernel panic - not syncing: Corrupted kernel text
CPU: 0 PID: 9 Comm: migration/0 Not tainted 3.19.0-01975-gb1b096e70f23 #4
Call Trace:
  [<0000000000113972>] show_stack+0x72/0xf0
  [<000000000081f15e>] dump_stack+0x6e/0x90
  [<000000000081c4e8>] panic+0x108/0x2b0
  [<000000000081be64>] jump_label_bug.isra.2+0x104/0x108
  [<0000000000112176>] __jump_label_transform+0x9e/0xd0
  [<00000000001121e6>] __sm_arch_jump_label_transform+0x3e/0x50
  [<00000000001d1136>] multi_cpu_stop+0x12e/0x170
  [<00000000001d1472>] cpu_stopper_thread+0xb2/0x168
  [<000000000015d2ac>] smpboot_thread_fn+0x134/0x1b0
  [<0000000000158baa>] kthread+0x10a/0x110
  [<0000000000824a86>] kernel_thread_starter+0x6/0xc
Reported-and-tested-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
[bwh: Backported to 3.2: add necessary #include directives]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit bd2cba07 upstream.

This command is missing.

Fixes: 3a2dfbe8 ("xfrm: Notify changes in UDP encapsulation via netlink")
CC: Martin Willi <martin@strongswan.org>
Reported-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 8d465bb7 upstream.

This command is missing.

Fixes: 5c79de6e ("[XFRM]: User interface for handling XFRM_MSG_MIGRATE")
Reported-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit b0b59b00 upstream.

This command is missing.

Fixes: 97a64b45 ("[XFRM]: Introduce XFRM_MSG_REPORT.")
Reported-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 451a2886 upstream.

unfortunately, allowing an arbitrary 16bit value means a possibility of
overflow in the calculation of total number of pages in bio_map_user_iov() -
we rely on there being no more than PAGE_SIZE members of sum in the
first loop there.  If that sum wraps around, we end up allocating
too small array of pointers to pages and it's easy to overflow it in
the second loop.

X-Coverup: TINC (and there's no lumber cartel either)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[bwh: s/MAX_UIOVEC/UIO_MAXIOV/. This was fixed upstream by commit
 fdc81f45 ("sg_start_req(): use import_iovec()"), but we don't have
 that function.]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit f7e9e358 upstream.

This problem appears to have been introduced in 2.6.29 by commit
93197a36 "Rewrite sysfs processor cache info code".

This caused lscpu to error out on at least e500v2 devices, eg:

  error: cannot open /sys/devices/system/cpu/cpu0/cache/index2/size: No such file or directory

Some embedded powerpc systems use cache-size in DTS for the unified L2
cache size, not d-cache-size, so we need to allow for both DTS names.
Added a new CACHE_TYPE_UNIFIED_D cache_type_info structure to handle
this.

Fixes: 93197a36 ("powerpc: Rewrite sysfs processor cache info code")
Signed-off-by: Dave Olson <olson@cumulusnetworks.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
[bwh: Backported to 3.2:
 - Adjust context
 - Preserve __cpuinit attribute on cache_do_one_devnode_unified()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 91bf0c2d upstream.

The functions snd_emu10k1_proc_spdif_read and snd_emu1010_fpga_read
acquire the emu_lock before accessing the FPGA. The function used
to access the FPGA (snd_emu1010_fpga_read) also tries to take
the emu_lock which causes a deadlock.
Remove the outer locking in the proc-functions (guarding only the
already safe fpga read) to prevent this deadlock.

[removed superfluous flags variables too -- tiwai]
Signed-off-by: Michael Gernoth <michael@gernoth.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 8de58074 upstream.

We may exit this function without properly freeing up the maapings
we may have acquired. Fix the bug.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
[bwh: Backported to 3.2:
 - Adjust filename
 - Keep using kmap_atomic()/kunmap_atomic(), not the sg_-prefixed functions]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit b4491592 upstream.

The comment line regarding IOMMU_INIT and IOMMU_INIT_FINISH
macros is incorrect:

  "The standard vs the _FINISH differs in that the _FINISH variant
  will continue detecting other IOMMUs in the call list..."

It should be "..the *standard* variant will continue
detecting..."

Fix that. Also, make it readable while at it.
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: konrad.wilk@oracle.com
Fixes: 6e963669 ("x86, iommu: Update header comments with appropriate naming")
Link: http://lkml.kernel.org/r/1428508017-5316-1-git-send-email-Aravind.Gopalakrishnan@amd.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 5b5800fa upstream.

These commands are missing.

Fixes: 28d8909b ("[XFRM]: Export SAD info.")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 5e6deeba upstream.

This command is missing.

Fixes: ecfd6b18 ("[XFRM]: Export SPD info")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit ebe96e64 upstream.

AF_RDS, PF_RDS and SOL_RDS are available in header files,
and there is no need to get their values from /proc. Document
this correctly.

Fixes: 0c5f9b88 ("RDS: Documentation")
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit bd884149 upstream.

On ASUS TP500LN and X750JN, the touchpad absolute mode is reset each
time set_rate is done.

In order to fix this, we will verify the firmware version, and if it
matches the one in those laptops, the set_rate function is overloaded
with a function elantech_set_rate_restore_reg_07 that performs the
set_rate with the original function, followed by a restore of reg_07
(the register that sets the absolute mode on elantech v4 hardware).

Also the ASUS TP500LN and X750JN firmware version, capabilities, and
button constellation is added to elantech.c
Reported-and-tested-by: George Moutsopoulos <gmoutso@yahoo.co.uk>
Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
[bwh: Backported to 3.2:
 - Adjust context
 - Drop the insertion into a comment we don't have]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 2e7056c4 upstream.

Looking over the implementation for jhash2 and comparing it to jhash_3words
I realized that the two hashes were in fact very different.  Doing a bit of
digging led me to "The new jhash implementation" in which lookup2 was
supposed to have been replaced with lookup3.

In reviewing the patch I noticed that jhash2 had originally initialized a
and b to JHASH_GOLDENRATIO and c to initval, but after the patch a, b, and
c were initialized to initval + (length << 2) + JHASH_INITVAL.  However the
changes in jhash_3words simply replaced the initialization of a and b with
JHASH_INITVAL.

This change corrects what I believe was an oversight so that a, b, and c in
jhash_3words all have the same value added consisting of initval + (length
<< 2) + JHASH_INITVAL so that jhash2 and jhash_3words will now produce the
same hash result given the same inputs.

Fixes: 60d509c8 ("The new jhash implementation")
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit e12fb972 upstream.

Previously commit 14ece102 added a
support for for syncing parent directory of newly created inodes to
make sure that the inode is not lost after a power failure in
no-journal mode.

However this does not work in majority of cases, namely:
 - if the directory has inline data
 - if the directory is already indexed
 - if the directory already has at least one block and:
	- the new entry fits into it
	- or we've successfully converted it to indexed

So in those cases we might lose the inode entirely even after fsync in
the no-journal mode. This also includes ext2 default mode obviously.

I've noticed this while running xfstest generic/321 and even though the
test should fail (we need to run fsck after a crash in no-journal mode)
I could not find a newly created entries even when if it was fsynced
before.

Fix this by adjusting the ext4_add_entry() successful exit paths to set
the inode EXT4_STATE_NEWENTRY so that fsync has the chance to fsync the
parent directory as well.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Frank Mayhar <fmayhar@google.com>
[bwh: Backported to 3.2: inline data is not supported]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 74ff9602 upstream.

The delay time after a reset in the codec probe callback was too short,
and did not work on certain hw because the codec needs more time to
power on. This increases the delay time from 1us to 1ms.
Signed-off-by: Pascal Huerst <pascal.huerst@gmail.com>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 2a21dc7c upstream.

We found that TLB mismatch not only happens after kernel resume, but
also happens during snapshot restore. So move it to the beginning of
swsusp_arch_suspend().
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/9621/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 2f92b314 upstream.

USB ID 2001:330d is used for a D-Link DWA-131.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 8defb336 upstream.

Usually ELF_ET_DYN_BASE is 2/3 of TASK_SIZE. With 3G/1G user/kernel
split this is not so, because 2*TASK_SIZE overflows 32 bits,
so the actual value of ELF_ET_DYN_BASE is:
	(2 * TASK_SIZE / 3) = 0x2a000000

When ASLR is disabled PIE binaries will load at ELF_ET_DYN_BASE address.
On 32bit platforms AddressSanitzer uses addresses [0x20000000 - 0x40000000]
for shadow memory [1]. So ASan doesn't work for PIE binaries when ASLR disabled
as it fails to map shadow memory.
Also after Kees's 'split ET_DYN ASLR from mmap ASLR' patchset PIE binaries
has a high chance of loading somewhere in between [0x2a000000 - 0x40000000]
even if ASLR enabled. This makes ASan with PIE absolutely incompatible.

Fix overflow by dividing TASK_SIZE prior to multiplying.
After this patch ELF_ET_DYN_BASE equals to (for CONFIG_VMSPLIT_3G=y):
	(TASK_SIZE / 3 * 2) = 0x7f555554

[1] https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerAlgorithm#MappingSigned-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Reported-by: Maria Guseva <m.guseva@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 3c3b04d1 upstream.

Due to insufficient check in btrfs_is_valid_xattr, this unexpectedly
works:

 $ touch file
 $ setfattr -n user. -v 1 file
 $ getfattr -d file
user.="1"

ie. the missing attribute name after the namespace.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94291Reported-by: William Douglas <william.douglas@intel.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
[bwh: Backported to 3.2: XATTR_BTRFS_PREFIX is not supported]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit dcc82f47 upstream.

While committing a transaction we free the log roots before we write the
new super block. Freeing the log roots implies marking the disk location
of every node/leaf (metadata extent) as pinned before the new super block
is written. This is to prevent the disk location of log metadata extents
from being reused before the new super block is written, otherwise we
would have a corrupted log tree if before the new super block is written
a crash/reboot happens and the location of any log tree metadata extent
ended up being reused and rewritten.

Even though we pinned the log tree's metadata extents, we were issuing a
discard against them if the fs was mounted with the -o discard option,
resulting in corruption of the log tree if a crash/reboot happened before
writing the new super block - the next time the fs was mounted, during
the log replay process we would find nodes/leafs of the log btree with
a content full of zeroes, causing the process to fail and require the
use of the tool btrfs-zero-log to wipeout the log tree (and all data
previously fsynced becoming lost forever).

Fix this by not doing a discard when pinning an extent. The discard will
be done later when it's safe (after the new super block is committed) at
extent-tree.c:btrfs_finish_extent_commit().

Fixes: e688b725 (Btrfs: fix extent pinning bugs in the tree log)
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 73cffdb6 upstream.

Don't wait after sending request for offers to the host. This wait is
unnecessary and simply adds 5 seconds to the boot time.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: deleted variable t was declared as int]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 299d0c5b upstream.

The comparison from the previous line seems to have been erroneously
(partially) copied-and-pasted onto the next. The second line should be
checking req.bytes, not req.lnum.

Coverity CID #139400
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
[rw: Fixed comparison]
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit f16db807 upstream.

In some of the 'out_not_moved' error paths, lnum may be used
uninitialized. Don't ignore the warning; let's fix it.

This uninitialized variable doesn't have much visible effect in the end,
since we just schedule the PEB for erasure, and its LEB number doesn't
really matter (it just gets printed in debug messages). But let's get it
straight anyway.

Coverity CID #113449
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit d74adbdb upstream.

If aeb->len >= vol->reserved_pebs, we should not be writing aeb into the
PEB->LEB mapping.

Caught by Coverity, CID #711212.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
[bwh: Backported to 3.2: adjust context; s/leb/seb/g]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 8eef7d70 upstream.

We are completely discarding the earlier value of 'bitflips', which
could reflect a bitflip found in ubi_io_read_vid_hdr(). Let's use the
bitwise OR of header and data 'bitflip' statuses instead.

Coverity CID #1226856
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 2c20d92d upstream.

the lcd type as defined in the Kconfig is not matching in the code.
as a result the rs, rw and en pins were getting interchanged.
Kconfig defines the value of PANEL_LCD to be 1 if we select custom
configuration but in the code LCD_TYPE_CUSTOM is defined as 5.

my hardware is LCD_TYPE_CUSTOM, but the pins were assigned to it
as pins of LCD_TYPE_OLD, and it was not working.
Now values are corrected with referenece to the values defined in
Kconfig and it is working.
checked on JHD204A lcd with LCD_TYPE_CUSTOM configuration.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: parameter description was split across two lines]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 323ece54 upstream.

Values directly from descriptors given in debug statements
must be converted to native endianness.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 8787041d upstream.

The WM8741 DAC supports the following typical audio sampling rates:
  44.1kHz, 88.2kHz, 176.4kHz (eg: with a master clock of 22.5792MHz)
  32kHz, 48kHz, 96kHz, 192kHz (eg: with a master clock of 24.576MHz)

For the rates lists, we should use 82000 instead of 88235, 176400
instead of 1764000 and 192000 instead of 19200 (seems to be a typo).
Signed-off-by: Sergej Sawazki <ce3a@gmx.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 0b053c95 upstream.

OPTIMIZER_HIDE_VAR(), as defined when using gcc, is insufficient to
ensure protection from dead store optimization.

For the random driver and crypto drivers, calls are emitted ...

  $ gdb vmlinux
  (gdb) disassemble memzero_explicit
  Dump of assembler code for function memzero_explicit:
    0xffffffff813a18b0 <+0>:	push   %rbp
    0xffffffff813a18b1 <+1>:	mov    %rsi,%rdx
    0xffffffff813a18b4 <+4>:	xor    %esi,%esi
    0xffffffff813a18b6 <+6>:	mov    %rsp,%rbp
    0xffffffff813a18b9 <+9>:	callq  0xffffffff813a7120 <memset>
    0xffffffff813a18be <+14>:	pop    %rbp
    0xffffffff813a18bf <+15>:	retq
  End of assembler dump.

  (gdb) disassemble extract_entropy
  [...]
    0xffffffff814a5009 <+313>:	mov    %r12,%rdi
    0xffffffff814a500c <+316>:	mov    $0xa,%esi
    0xffffffff814a5011 <+321>:	callq  0xffffffff813a18b0 <memzero_explicit>
    0xffffffff814a5016 <+326>:	mov    -0x48(%rbp),%rax
  [...]

... but in case in future we might use facilities such as LTO, then
OPTIMIZER_HIDE_VAR() is not sufficient to protect gcc from a possible
eviction of the memset(). We have to use a compiler barrier instead.

Minimal test example when we assume memzero_explicit() would *not* be
a call, but would have been *inlined* instead:

  static inline void memzero_explicit(void *s, size_t count)
  {
    memset(s, 0, count);
    <foo>
  }

  int main(void)
  {
    char buff[20];

    snprintf(buff, sizeof(buff) - 1, "test");
    printf("%s", buff);

    memzero_explicit(buff, sizeof(buff));
    return 0;
  }

With <foo> := OPTIMIZER_HIDE_VAR():

  (gdb) disassemble main
  Dump of assembler code for function main:
  [...]
   0x0000000000400464 <+36>:	callq  0x400410 <printf@plt>
   0x0000000000400469 <+41>:	xor    %eax,%eax
   0x000000000040046b <+43>:	add    $0x28,%rsp
   0x000000000040046f <+47>:	retq
  End of assembler dump.

With <foo> := barrier():

  (gdb) disassemble main
  Dump of assembler code for function main:
  [...]
   0x0000000000400464 <+36>:	callq  0x400410 <printf@plt>
   0x0000000000400469 <+41>:	movq   $0x0,(%rsp)
   0x0000000000400471 <+49>:	movq   $0x0,0x8(%rsp)
   0x000000000040047a <+58>:	movl   $0x0,0x10(%rsp)
   0x0000000000400482 <+66>:	xor    %eax,%eax
   0x0000000000400484 <+68>:	add    $0x28,%rsp
   0x0000000000400488 <+72>:	retq
  End of assembler dump.

As can be seen, movq, movq, movl are being emitted inlined
via memset().

Reference: http://thread.gmane.org/gmane.linux.kernel.cryptoapi/13764/
Fixes: d4c5efdb ("random: add and use memzero_explicit() for clearing data")
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: mancha security <mancha1@zoho.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit fd99a094 upstream.

Use the correct flags for atom.

v2: handle DRM_MODE_FLAG_DBLCLK
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 838d030b upstream.

The callback function signature has changed in commit a5818a8b (pinctrl:
get_group_pins() const fixes)

Fixes: a5818a8b ('pinctrl: get_group_pins() const fixes')
Cc: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 1915a718 upstream.

The return value of power_supply_register() call was not checked and
even on error probe() function returned 0. If registering failed then
during unbind the driver tried to unregister power supply which was not
actually registered.

This could lead to memory corruption because power_supply_unregister()
unconditionally cleans up given power supply.

Fix this by checking return status of power_supply_register() call. In
case of failure, clean up sysfs entries and fail the probe.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Fixes: 9be0fcb5 ("compal-laptop: add JHL90, battery & hwmon interface")
Signed-off-by: Sebastian Reichel <sre@kernel.org>
[bwh: Backported to 3.2: insert the appropriate cleanup code as there is no
 common 'remove' label]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>