This patch changes vectored file I/O to use kmap + kunmap when mapping
incoming SGL memory -> struct iovec in order to properly support 32-bit
highmem configurations.  This is because an extra bounce buffer may be
required when processing scatterlist pages allocated with GFP_KERNEL.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

This patch adds [dev,lun]_link_magic value assignment + checks within generic
target_fabric_port_link() and target_fabric_mappedlun_link() code to ensure
destination config_item *target_item sent from configfs_symlink() ->
config_item_operations->allow_link() is the underlying se_device->dev_group
and se_lun->lun_group that we expect to symlink.
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

This patch converts the TMR path in srpt_handle_tsk_mgmt() to use
target_submit_tmr() with TARGET_SCF_ACK_KREF flag usage.

v2: Drop ununused res in target_submit_tmr (Fengguang.Wu)

Cc: Christoph Hellwig <hch@lst.de>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Roland Dreier <roland@kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

This patch converts the main srpt_handle_cmd() I/O path to use modern
target_submit_cmd() with TARGET_SCF_ACK_KREF flag usage.  This includes
dropping the original internal ioctx->kref + srpt_put_send_ioctx() usage
in favor of target_put_sess_cmd() w/ se_cmd_t->cmd_kref within ib_srpt
response callbacks.

It also updates srpt_abort_cmd() to call target_put_sess_cmd() for
completion of aborted commands, and adds target_wait_for_sess_cmds() into
srpt_release_channel_work() to allow outstanding I/O to complete during
session shutdown.

Also, go ahead and update srpt_handle_tsk_mgmt() to make the remaining
transport_init_se_cmd() to setup the ioctx->cmd with se_tmr_req.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Roland Dreier <roland@kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

We already expect TFO->get_blocks() to return sector_t for zero value case
when doing WRITE_SAME to the end of the backend device, so go ahead and return
sector_t from spc_get_write_same_sectors() to handle this case properly.

Also, update the single iblock_execute_write_same() caller of this code.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

All elements are assigned even the NULL member at the end so there is no
reason to allocate zeroed memory.

(nab: Fix up minor apply breakage in for-next)
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Only slots 0-5 are used so 6 slots should be enough. I don't see anyone
writting anything else than NULL into ->default_groups[5] so a "late"
initialisation should not happen here.

(nab: Fix up minor apply breakage in for-next)
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

default_groups is defined as struct config_group **default_groups so
we don't need to allocate a whole struct but only enough space for a
pointer that points there.

(nab: Fix up minor apply breakage in for-next)
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

We recently changed this to return positive subsystem error codes so the
error handling needs to be updated.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

The function iscsit_build_conn_drop_async_message() is called
from iscsit_close_connection() with spin lock 'sess->conn_lock'
held, so we should use GFP_ATOMIC instead of GFP_KERNEL.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: stable@vger.kernel.org
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

kfree on null pointer is a no-op.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Go ahead and forward declare the handful of helper functions required
for bio submission code in order to avoid the extra function prototypes.
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@risingtidesystems.com>

No need to have a goto where a return is clearer.
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@risingtidesystems.com>

Search through the list of pending commands on the session list to find
the command the initiator is actually aborting, so that we can pass the
correct LUN to the core TMR handling code.

(nab: Allow abort requests to work to LUN=0 with mainline target code)
Signed-off-by: Steve Hodgson <steve@purestorage.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Cc: stable@vger.kernel.org
Signed-off-by: Nicholas Bellinger <nab@risingtidesystems.com>

v2: Use correct target_core_stat.c 2006 copyright year
v3: Drop extra unnessary legal verbage from header (hch)

Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

This patch adds support for emulation of WRITE_SAME w/ UNMAP=0 within
iblock_execute_write_same() backend code.

The emulation uses a bio_add_page() call for each sector, and by default
enforces a limit of max_write_same_len=0xFFFF (65536) sectors following
what scsi_debug reports per default for MAXIMUM WRITE SAME LENGTH.

It also sets max_write_same_len to the operational default at setup ->
iblock_configure_device() time.

(hch: Move unmap logic into iblock_execute_write_same_unmap + add
      check for single sector SGLs in iblock_execute_write_same)
(mkp: Update comment for 0xFFFF magic constant)
(nab: drop left-over max_write_same_len check in iblock_execute_write_same)

Cc: Christoph Hellwig <hch@lst.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

This patch adds a new max_write_same_len device attribute for use with
WRITE_SAME w/ UNMAP=0 backend emulation.  This can be useful for
lowering the default backend value (IBLOCK uses 0xFFFF).

Also, update block limits VPD emulation code in spc_emulate_evpd_b0() to
report MAXIMUM WRITE SAME LENGTH, and enforce max_write_same_len during
sbc_parse() -> sbc_setup_write_same() CDB sanity checking for all emulated
WRITE_SAME w/ UNMAP=0 cases.

(Robert: Move max_write_same_len check in sbc_setup_write_same() to
         check both WRITE_SAME w/ UNMAP=1 and w/ UNMAP=0 cases)

Cc: Christoph Hellwig <hch@lst.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Robert Elliott <Elliott@hp.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

This patch adds a new sbc_ops->execute_write_same_unmap() caller for use
with WRITE_SAME w/ UNMAP=1, and performs the ->execute_cmd() setup based
this bit within sbc_setup_write_same() code.

Also, makes the changes in sbc_parse_cdb() to handle a sense_reason_t
return from sbc_setup_write_same() on error.
Reported-by: Christoph Hellwig <hch@lst.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

As reported by Fengguang Wu + 0 day build team, the sense_reason_t conversion
in for-next did not catch the recent sbc_emulate_noop() addition in mainline,
producing the following build warning in auto-next:

drivers/target/target_core_sbc.c: In function ‘sbc_parse_cdb’:
drivers/target/target_core_sbc.c:555: warning: assignment from incompatible pointer type

Go ahead and remove duplicate sbc_emulate_verify(), and change VERIFY to
use sbc_emulate_noop() as well.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.

CC: Chris Boot <bootc@bootc.net>
CC: "Nicholas A. Bellinger" <nab@linux-iscsi.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

There are some cases, for example when the initiator sends an
out-of-bounds ErrorRecoveryLevel value, where the iSCSI target
terminates the connection without sending back any error.  Audit the
login path and add appropriate iscsit_tx_login_rsp() calls to make
sure this doesn't happen.
Signed-off-by: Roland Dreier <roland@purestorage.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

This patch fixes a bug in the hanlding of initiator provided ExpStatSN and
individual iscsi_cmd->stat_sn comparision during iscsi_conn->stat_sn
wrap-around within iscsit_ack_from_expstatsn() code.

This bug would manifest itself as iscsi_cmd descriptors not being Acked
by a lower ExpStatSn, causing them to be leaked until an iSCSI connection
or session reinstatement event occurs to release all commands.

Also fix up two other uses of incorrect CmdSN SNA comparison to use wrapper
usage from include/scsi/iscsi_proto.h.
Signed-off-by: Steve Hodgson <steve@purestorage.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

We need to disable BHs when taking sess_idr_lock because the
iscsit_handle_time2retain_timeout() timer function takes
se_tpg->session_lock, and iscsit_close_session() nests sess_idr_lock
inside se_tpg->session_lock.  So if the timer can run inside
sess_idr_lock, we have a potential AB-BA deadlock.

Fix this by disabling BHs when taking sess_idr_lock.  This was found
because of a lockdep warning, but it looks like a real (if highly
theoretical) deadlock.  In any case avoiding lockdep spew so that we can
find other issues is a worthy cause.
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Fix a regression bug in core_scsi3_emulate_pro_release() where
should still be getting released via core_scsi3_put_pr_reg() during
No persistent reservation, with returing GOOD status.

Use goto statement here to follow converted code from hch.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

This patch fixes a possible case in transport_generic_new_cmd() where a
failure from TFO->write_pending() from a fabric module return something
other than -EAGAIN or -ENOMEM would cause a failed WRITE to silently
succeed.

Go ahead and return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE for this
special case instead of only just making noise with WARN_ON().

(v2: Fix incorrect exception return for all cases)

Cc: Christoph Hellwig <hch@lst.de>
Cc: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Fix a bug introduced with patch "target: pass sense_reason as a return value"
in for-3.8 code where only target port groups with TPGS_EXPLICT_ALUA set
need to be allowed to perform explictly ALUA.

Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Pass the sense reason as an explicit return value from the I/O submission
path instead of storing it in struct se_cmd and using negative return
values.  This cleans up a lot of the code pathes, and with the sparse
annotations for the new sense_reason_t type allows for much better
error checking.

(nab: Convert spc_emulate_modesense + spc_emulate_modeselect to use
      sense_reason_t with Roland's MODE SELECT changes)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

This patch fixes a new off-by-one bug in the hardcoded starting offset of
spc_emulate_modesense() code that causes BLOCK DESCRIPTOR to be incorrectly
written within the MEDIUM TYPE buffer area of the mode parameter header.

According to spc4r30, Section 7.5.4, BLOCK DESCRIPTOR for MODE_SENSE_10
starts at byte 3, and BLOCK_DESCRIPTOR for MODE_SENSE (6) starts at byte 2.

(roland: add MODE DATA LENGTH + MEDIUM TYPE offset comment)

Cc: Roland Dreier <roland@purestorage.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

This is another thing that compliance tests try, and it's easy to
implement on top of the MODE SENSE refactoring; since we don't claim
to support any changeable values, all we need to do is check that
the page contents sent by the initiator match what we would return.
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

The Windows SCSI compliance test asks for this mode page, and it's
easy to implement: we can just return all 0s to show we don't support
any of these features.
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Convert spc_emulate_modesense() to use a table of mode pages, rather
than a switch statement.  This makes it possible to add more pages
sanely -- in particular we no longer need to make sure we keep the
0x3f (return all mode pages) case in sync.

While we're touching this code, make our MODE SENSE emulation a bit
better in a couple of ways:
 - When the initiator passes PC == 1 asking for changeable values,
   return all 0s to show we don't support setting anything.
 - Return a block descriptor for disk devices.

(nab: fix up device attribute references to use dev->dev_attrib
      in for-next code)
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Instead of using the obfuscated pattern of

	list_for_each_entry(var, list, ...)
		break;

to set var to the first entry of a list, use the straightforward

	var = list_first_entry(list, ...);
Reported-by: Joern Engel <joern@logfs.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Now that the reservations and ALUA code have been cleaned up there is no need
for the get_device_rev method, as we only need the standards revision in the
inquiry data, where we can hardcode it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

We always support ALUA for virtual backends, and never for physical ones.  Simplify
the code to just deal with these two cases and remove the superflous abstractions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

We do not support host-level reservations for the pscsi backend, and all
virtual backends are newere than SCSI-2, so just make the combined
SPC-3 + SCSI-2 support the only supported variant and kill the switches
for the different implementations, given that this code handles the no-op
version just fine.

(hch: Update DRF_SPC2_RESERVATIONS lock usage)
Signed-off-by: Christoph Hellwig <hch@lst.de>

We can just key off ordered tag emulation of the transport_type field.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

We need to assign spc_emulate_report_luns to the execute_cmd callback
and not execute it directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

drivers/target/target_core_pscsi.c:464:5: sparse: symbol 'pscsi_configure_device'
was not declared. Should it be static?

FYI, there are new sparse warnings show up in

tree:   git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending.git queue
head:   738b86ac5e56c645aa5b7bf49cb38e2a04c665f8
commit: 410aeee637c47bcf7e8dd7893347fe0811e07ab1 [47/51] target: kill struct se_subsystem_dev

vim +464 drivers/target/target_core_pscsi.c

410aeee6 Christoph Hellwig  2012-10-08 @464  int pscsi_configure_device(struct se_device *dev)
c66ac9db Nicholas Bellinger 2010-12-17  465  {
410aeee6 Christoph Hellwig  2012-10-08  466  	struct se_hba *hba = dev->se_hba;
410aeee6 Christoph Hellwig  2012-10-08  467  	struct pscsi_dev_virt *pdv = PSCSI_DEV(dev);
c66ac9db Nicholas Bellinger 2010-12-17  468  	struct scsi_device *sd;
410aeee6 Christoph Hellwig  2012-10-08  469  	struct pscsi_hba_virt *phv = dev->se_hba->hba_ptr;
c66ac9db Nicholas Bellinger 2010-12-17  470  	struct Scsi_Host *sh = phv->phv_lld_host;
c66ac9db Nicholas Bellinger 2010-12-17  471  	int legacy_mode_enable = 0;
410aeee6 Christoph Hellwig  2012-10-08  472  	int ret;

Please consider folding the attached diff :-)
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>