Merge "The i.MX device tree updates for 4.7" from Shawn Guo:

 - More i.MX6 System-on-Module board support from Ka-Ro electronics:
   tx6s-8xxx, tx6u-8xxx, tx6q-1xxx, tx6ul-00xx.
 - Nitrogen6_MAX QP and Nitrogen6_SoloX board support from Boundary
   Devices.
 - VF610 based ZII development board support.
 - Add SAI interface audio support for i.MX6SX SDB board.
 - A number of random updates on LS1021A and VF610 dts files.
 - A couple of pinumx updates on i.MX25 and i.MX28.

* tag 'imx-dt-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (36 commits)
  ARM: dts: imx6qdl-udoo: add 7 inch LCD touchscreen panel support
  ARM: dts: i.MX3x: add keypad port devicetree nodes
  ARM: dts: ls1021a: add pix clock to DCU dts node
  ARM: dts: ls1021a: DSPI has 6 chip-selects
  ARM: dts: ls1021a: Add gpio support for ls1021a platform
  ARM: dts: imx6q-ba16: Remove unused vqmmc-supply
  ARM: dts: ls1021a: add SCFG MSI dts node
  ARM: dts: imx28: add alternative pinmuxing for mac0
  ARM: dts: imx6q-tbs2910: fix fec reset polarity
  ARM: dts: vf610-zii-dev: Add ZII development board.
  ARM: dts: vfxxx: add missing reg properties
  ARM: dts: vf-colibri: increase NAND clock speed
  ARM: dts: vf-colibri: alias the primary FEC as ethernet0
  ARM: dts: imx6sx-sdb: Add SAI support
  bindings: fsl-imx-sdma: Document 'fsl,sdma-event-remap' property
  ARM: dts: imx6sx: Remove unused property
  ARM: dts: imx6sx: Fix SAI DMA index
  ARM: dts: imx6q-ba16: Disable pwm2 by default
  ARM: dts: imx: add Boundary Devices Nitrogen6_SoloX board
  ARM: dts: imx6qdl-sabresd: Pass the hannstar panel compatible string
  ...

Merge tag 'tegra-for-4.7-arm' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt

Merge "ARM: tegra: Changes for v4.7-rc1" from Thierry Reding:

A couple of patches that cleanup some Kconfig, enable various features,
use stdout-path to define the debug serial port (so that it doesn't have
to be manually specified on the kernel command-line) and cleanup and fix
some minor device trees bugs.

* tag 'tegra-for-4.7-arm' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: Correct interrupt type for ARM TWD
  ARM: tegra: Add stdout-path for various boards
  ARM: tegra: Replace legacy *,wakeup property with wakeup-source
  ARM: tegra: Enable watchdog support for Tegra114 and Tegra124
  ARM: tegra: Add high speed UARTs to Jetson TK1 device tree
  ARM: tegra: Fix copy/paste typo in several DTS includes
  ARM: tegra: Remove redundant ARM_L1_CACHE_SHIFT_6 select

Merge tag 'davinci-for-v4.7/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt

Merge "Device-Tree updates for DaVinci" from Sekhar Nori:

This contains some clean-up and fixes of device-tree data and addition
of i2c1 node for DA850.

* tag 'davinci-for-v4.7/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry for i2c1
  ARM: DTS: da850: add node for i2c1
  ARM: dts: davinci: use proper address after @
  ARM: DTS: da850: fix missing #gpio-cells in gpio node

Merge tag 'nomadik-dts-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/dt

Merge "Nomadik DTS changes for v4.7" from Linus Walleij:
- Add accelerometer for NHK15
- Add DMA engine definitions and UART channels

* tag 'nomadik-dts-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
  ARM: dts: nomadik: add DMA engine and some channels
  ARM: dts: nomadik: add accelerometer IRQ and pin setting

Merge "mvebu dt for 4.7 (part 1)" from Gregory CLEMENT:

- add hardware monitor support in the NSA320 device tree
- update makefile with kirkwood-ds112.dtb and kirkwood-nsa320.dtb
- fix GPIO config on the Linksys boards
- various Kirkwood DT warning fixup from the newer DT compiler

* tag 'mvebu-dt-4.7-1' of git://git.infradead.org/linux-mvebu:
  ARM: dts: kirkwood: Add DTS for Linksys EA4200v2/EA4500
  ARM: dts: orion5x: add device tree for kurobox-pro
  ARM: dts: kirkwood: Add address go regulator unit name
  ARM: dts: kirkwood: Add address to mbus unit name
  ARM: dts: kirkwood: Remove address from gpio-i2c unit name
  ARM: dts: kirkwood: Fixup pcie DT warnings
  ARM: dts: kirkwood: Add address to ethernet-phy unit name
  ARM: dts: kirkwood: Remove address from dsa unit name
  ARM: dts: kirkwood: Remove node address from leds
  ARM: dts: kirkwood: Remove button address and fixup names
  ARM: dts: kirkwood: add kirkwood-nsa320.dtb to Makefile
  ARM: dts: kirkwood: add kirkwood-ds112.dtb to Makefile
  ARM: mvebu: fix GPIO config on the Linksys boards
  ARM: dts: kirkwood: Add the hardware monitor to the NSA320 device tree

Merge "Samsung Device Tree updates and improvements for v4.7" from Krzysztof Kozlowski:

1. Enable accelerated AES (Security SubSystem) on Exynos4412-based boards.
2. Enable HDMI CEC on Exynos4412-based Odroid.
3. Add regulator supplies for eMMC/SD on Odroid XU3/XU4.
4. Fix DTC unit name warnings.
5. Merge topic branch of new Artik5 board.

* tag 'samsung-dt-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: s5p: Fix DTC unit name warnings in SMDKv210 board
  ARM: dts: exynos: Fix DTC unit name warnings in Exynos5440
  ARM: dts: exynos: Fix DTC unit name warnings in SMDK5420
  ARM: dts: exynos: Fix DTC unit name warnings in Peach Pit
  ARM: dts: exynos: Fix DTC unit name warnings in Exynos542x
  ARM: dts: exynos: Fix DTC unit name warnings in Exynos5250
  ARM: dts: exynos: Fix DTC unit name warnings in Exynos4x12
  ARM: dts: exynos: Fix DTC unit name warnings in Trats2 board
  ARM: dts: exynos: Fix DTC unit name warnings in Exynos4
  ARM: dts: exynos: Fix DTC unit name warnings in Exynos3250
  ARM: dts: exynos: Fix DTC unit name warnings in cros-adc-thermistors
  ARM: dts: exynos: Add eMMC and SD regulator supplies to Odroid XU3/XU4
  ARM: dts: exynos: Enable the HDMI CEC device on Exynos4412 Odroid boards
  ARM: dts: exynos: Add node for the HDMI CEC device to exynos4
  ARM: dts: exynos: Add HDMI CEC pin definition to exynos4 pinctrl
  ARM: dts: exynos: Enable SSS on Odroid X/X2/U3 family
  ARM: dts: exynos: Enable SSS on Trats2
  ARM: dts: exynos: Add Security SubSystem node to Exynos4

Merge tag 'samsung-dt-exynos3250-artik5-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt

Merge "Topic branch for Device Tree changes for Exynos 3250 for v4.7" from Krzysztof Kozlowski:

Merge necessary new clocks from Sylwester (used by new board) and add support
for Exynos3250-based Artik5 board.

* tag 'samsung-dt-exynos3250-artik5-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: exynos: Add MSHC2 DT node for SD card for exynos3250-artik5-eval board
  ARM: dts: exynos: Add exynos3250-artik5 dtsi file for ARTIK5 module
  ARM: dts: exynos: Add MSHC2 DT node for Exynos3250 SoC
  ARM: dts: exynos: Add UART2 DT node for Exynos3250 SoC
  ARM: dts: exynos: Add initial gpio setting of MMC2 device for exynos3250-monk
  ARM: dts: exynos: Add initial pin configuration for exynos3250-rinato
  clk: samsung: exynos3250: Add MMC2 clock
  clk: samsung: exynos3250: Add UART2 clock
  dt-bindings: Add the clock id of UART2 and MMC2 for Exynos3250

The official UDOO board kit has 7 and 15.6 inch touchscreen LCD panels
as options.

This patch adds support for 7 inch panel only, but the 15.6 inch one
should be easy to add using the same regulator, backlight device and
LVDS channel.

Since this panel is an option for UDOO board it is disabled by default
and can be enabled (for example) by the following U-Boot commands:
fdt set backlight status okay
fdt set panelchan status okay
fdt set panel7 status okay
fdt set touchscreenp7 status okay

The LVDS channels is also disabled by default to avoid warning from its
driver.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Add the Keypad Port (KPP) devicetree nodes for IMX31 and IMX35 SOC.
Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

This adds the DMA engine to the Nomadik and assigns the UART
DMA channels. Both slave DMA for UARTs and the memcpy engine
works fine, tested on the Nomadik NHK15.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The LIS3LV02DL accelerometer on the Nomadik NHK15 can generate
IRQs by the DRDY line. Map this in the DTS file and set up the
pin as input to the SoC.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

This platform is based on a Marvell 88E6282 SoC and 88E6171 switch.

[gregory.clement@free-electrons.com: fix block comment style]
Signed-off-by: Bert Vermeulen <bert@biot.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

Add dts file to support Buffalo/Revogear Kurobox-Pro, which is marvell
orion5x based 3.5" HDD NAS.

It's a quite old product and already discontinued. So there's no
official website for it. But it was an early product which used marvell
orion5x 88F5182 chipset, it's popular in the community.
Some unofficial site:
  - http://buffalo.nas-central.org/wiki/Category:KuroboxPro
  - http://nice.kaze.com/KUROPRO_ProductSpecifications.pdf

This device tree is based on the board file:
  arch/arm/mach-orion5x/kurobox_pro-setup.c
However, the probing order of NAND and JEDEC-Flash are different from
the original board file, this results in incompatible minor number
for a few /dev/mtdX and /dev/mtdblockX devices.
So I still want to keep the board file for the time being.
Signed-off-by: Roger Shimizu <rogershimizu@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

The regulator has a reg property so include it in the unit name.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

The mbus node has a ranges property.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

gpio-i2c does not have a reg property, just a list of gpios.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

PCIe has a range property, so the unit name should contain an address.
Make use of the label to enable individual PCIe busses. Also, fixup
the synology dtsi file which added a label pcie2 rather than using the
existing pcie1 label.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

PHYs have an address on the mdio bus. So the unit name should contain
an address. This is complicated in that some .dtsi files contain the
node, but the reg is set in the .dts file. In this case, use the
abstract address X.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

The dsa node does not have a reg property, so remove the address from
the unit name.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

leds don't have a reg property, so remove the address from the unit name.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

The DT compiler is now warning about unit names with addresses but not
reg property. Fix all the gpio-key buttons which causes warnings.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

Add OF_DEV_AUXDATA entry for second i2c on the da850 DT board driver
to use i2c clock.
Signed-off-by: Petr Kulhavy <petr@barix.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

da850 has two I2C controllers, but the node for i2c1 was missing.
Add node for i2c1 controller and i2c1 pinmux pins.
Signed-off-by: Petr Kulhavy <petr@barix.com>
[nsekhar@ti.com: fix indentation]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

TI has been using the physical address in DT after the @ in device nodes.
The device tree convention is to use the same address that is used for
the reg property. This updates all davinci DT files to use the proper
convention.
Signed-off-by: David Lechner <david@lechnology.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

The gpio node is missing the mandatory property #gpio-cells, which is
causing runtime errors when using GPIOs e.g. with gpio-leds or gpio-keys:

"could not get #gpio-cells for /soc/gpio@1e26000"

This fixes the problem and adds the missing parameter.
The value is 2 according to the gpio-davinci.txt binding.
Signed-off-by: Petr Kulhavy <petr@barix.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

Merge tag 'v4.7-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

A lot display-controller nodes for DSI and the Analogix DP on rk3288
as well as general display+hdmi support on rk3036. With the Analogix
DP support, Veyron Chromeboks can now finally use their internal
display.

Other than this big improvement we have thermal support on the rk3228,
a long time missing binding document for the General Register Files
block, better operating points for Veyron devices and a bunch of fixes
with parts stemming from warnings that new dtc version can generate.

* tag 'v4.7-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (27 commits)
  ARM: dts: rockchip: move rk3036 memory definition to board files
  ARM: dts: rockchip: enable the eDP on rk3288 veyron devices
  ARM: dts: rockchip: simple panel and backlight supplies on veyron boards
  ARM: dts: rockchip: override edp hpd handling on veyron-pinky and speedy
  ARM: dts: rockchip: add rk3288-veyron-minnie backlight and panel settings
  ARM: dts: rockchip: add rk3288-veyron-jaq backlight and panel overrides
  ARM: dts: rockchip: add core rk3288-veyron backlight and panel nodes
  ARM: dts: rockchip: add startup delay to rk3288-veyron panel-regulators
  ARM: dts: rockchip: move edp-hpd pin definition into common location
  ARM: dts: rockchip: add rk3288 displayport controller node
  ARM: dts: rockchip: add rk3288 edp-phy node
  ARM: dts: rockchip: add missing unitname to cpu_leakage efuse
  ARM: dts: rockchip: drop unneeded properties from mipi node
  ARM: dts: rockchip: clean up gpio-keys nodes
  ARM: dts: rockchip: fix missing usbphy unit-names
  ARM: dts: rockchip: fix rk3288 power-domain unit names
  ARM: dts: rockchip: update rk3288-veyron cpu operating points
  ARM: dts: rockchip: remove broken-cd from emmc and sdio
  ARM: dts: rockchip: enable the tsadc for rk3228 evb
  ARM: dts: rockchip: add the thermal main info found on rk3228
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'socfpga_dts_for_v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt

SoCFPGA DTS updates for v4.7
- Update SD/MMC node for Arria10
- Update Arria10 with clock and interrupt fields for DMA
- Remove 'phy-addr' from stmmac node
- Remove ethernet node from Cyclone5 DTSI
- Add LEDs/KEYs/SWs support on Sockit
- Add L2 and OCRAM EDAC dts entries
- Add reset control for USB

* tag 'socfpga_dts_for_v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  ARM: dts: socfpga: add reset control for USB
  ARM: dts: socfpga: Add Altera Arria10 OCRAM EDAC devicetree entry
  ARM: dts: socfpga: Add Altera Arria10 L2 Cache EDAC devicetree entry
  ARM: dts: socfpga: Add support for HPS KEYs/SWs on SoCKit
  ARM: dts: socfpga: Add support for HPS LEDs on SoCKit
  ARM: dts: socfpga: Drop gmac0 from CV dtsi
  ARM: dts: socfpga: Drop phy-addr OF property from CV dtsi
  ARM: dts: socfpga: Add missing clock and interrupt fields for Arria10 DMA
  ARM: dts: socfpga: add the clk-phase property for sd/mmc clock
  ARM: dts: socfpga: add cap-sd-highspeed for SD/MMC node
Signed-off-by: Olof Johansson <olof@lixom.net>

Device Tree additions for LPC18xx platform
 - CREG clock controller
 - Real Time Clock (RTC)
 - Analog peripherals (ADC/DAC)
 - Warning fixes for the new dtc compiler

With the CREG clock controller in place it is now possible
to enable the internal RTC on LPC18xx/43xx platforms. The
analog peripherals (ADC/DAC) has also been added here and
enabled on both the EA4357 dev kit and Hitex eval board.

In addition to the new entries there are a fixes for the
DT warnings generated by the new dtc.

* tag 'lpc18xx_dts_for_4.7' of https://github.com/manabian/linux-lpc:
  dt-bindings: phy-lpc18xx-usb-otg: remove unit address from binding
  ARM: dts: lpc4350-hitex-eval: fix unit name warnings from dtc
  ARM: dts: lpc4357-ea4357: fix unit name warnings from dtc
  ARM: dts: lpc18xx: remove unit addresses from creg childs
  ARM: dts: armv7-m: add unit name to interrupt-controller
  ARM: dts: lpc4350-hitex-eval: add adc1
  ARM: dts: lpc4357-ea4357: add dac
  ARM: dts: lpc4357-ea4357: add adc0
  ARM: dts: lpc18xx: add dac node
  ARM: dts: lpc18xx: add adc nodes
  ARM: dts: lpc18xx: add rtc node
  ARM: dts: lpc18xx: add creg-clk node
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'versatile-dts-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/dt

Versatile DTS changes, baseline for the v4.7 series:
- Add CLCD panel nodes to PB1176 and PB11MPCore
- Add a DT binding blurb for the Versatile IB2 syscon
- Add DTS files for the (QEMU supported) RealView EB
  boards in all variants.
- Add DTS files for the (QEMU supported) RealView PBA8
  and PBX-A9 board variants.

* tag 'versatile-dts-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
  ARM: dts: realview: DT support for the PBA8 and PBX-A9
  ARM: dts: realview: support all the RealView EB board variants
  ARM: dts: realview: PB1176: define a standard VGA panel
  ARM: dts: realview: PB11MPCore: define a standard VGA panel
  Documentation/DT: add blurb for IB2 syscon to Versatile
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-cleanup-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Renesas ARM Based SoC Cleanup for v4.7

* Remove unnecessary clock-output-names properties from DT
* Use generic pinctrl properties in DT

* tag 'renesas-cleanup-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (26 commits)
  ARM: dts: sh73a0: Remove unnecessary clock-output-names properties
  ARM: dts: r8a73a4: Remove unnecessary clock-output-names properties
  ARM: dts: lager: Remove unnecessary clock-output-names properties
  ARM: dts: porter: Remove unnecessary clock-output-names properties
  ARM: dts: koelsch: Remove unnecessary clock-output-names properties
  ARM: dts: gose: Remove unnecessary clock-output-names properties
  ARM: dts: r8a7794: Remove unnecessary clock-output-names properties
  ARM: dts: r8a7793: Remove unnecessary clock-output-names properties
  ARM: dts: r8a7791: Remove unnecessary clock-output-names properties
  ARM: dts: r8a7779: Remove unnecessary clock-output-names properties
  ARM: dts: r8a7778: Remove unnecessary clock-output-names properties
  ARM: dts: r8a7740: Remove unnecessary clock-output-names properties
  ARM: dts: r7s72100: Remove unnecessary clock-output-names properties
  ARM: dts: r8a7790: Remove unnecessary clock-output-names properties
  ARM: dts: kzm9d: use generic pinctrl properties
  ARM: dts: kzm9g: use generic pinctrl properties
  ARM: dts: silk: use generic pinctrl properties
  ARM: dts: alt: use generic pinctrl properties
  ARM: dts: gose: use generic pinctrl properties
  ARM: dts: porter: use generic pinctrl properties
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-arm64-dt-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Renesas ARM64 Based SoC DT Updates for v4.7

* Use USB3.0 fallback compatibility string in DT for r8a7795 SoC
* Add CAN support to DT for r8a7795 SoC

* tag 'renesas-arm64-dt-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  arm64: dts: r8a7795: Use USB3.0 fallback compatibility string
  arm64: dts: r8a7795: Add CAN support
  arm64: dts: r8a7795: Add CAN external clock support
Signed-off-by: Olof Johansson <olof@lixom.net>

First DT batch for 4.7, additions for sama5d2 SoC:
- chipid node to identify the SoC
- SFR node (Special Function Registers)
- LCD controller's node

* tag 'at91-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
  ARM: dts: at91: sama5d2: add LCD controller
  ARM: dts: at91: sama5d2: add chipid node
  ARM: dts: at91: sama5d2: add SFR node
Signed-off-by: Olof Johansson <olof@lixom.net>

The DCU IP has distinct clock inputs for register access and the
pixel clocks, at least in some implementations. LS1021a seems to
use the same clock, therefore specify the same clock for "dcu"
and "pix".
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Both DSPI have signals SPIn_PCS[0:5] so in summary 6 chip-selects, not 5.
Fix that.
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Add gpio nodes for ls1021a platform dts file. The gpio
IP block of the ls1021a can be supported by the code
drivers/gpio/gpio-mpc8xxx.c.

The compatible "fsl,qoriq-gpio" is used by gpio driver:
drivers/gpio/gpio-mpc8xxx.c to implement general gpio
functionalities.

The chip-specific compatible "fsl,ls1021a-gpio" may be
used to fix potential gpio IP block errata or other
chip-specific gpio issues.
Signed-off-by: Liu Gang <Gang.Liu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

The vqmmc supply is not connected to bio supply on the BA16 module.
Hence remove vqmmc-supply property in usdhc3 node.
Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Add SCFG MSI dts node and add msi-parent property to PCIe dts node
that points to the corresponding MSI node.
Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com>
Tested-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

According to Documentation/devicetree/bindings/net/fsl-fec.txt the polarity
of "phy-reset-gpios" is assumed to be active-low unless a separate property
"phy-reset-active-high" is available. So replace the inconsistent polarity
description to make the correct active-low reset behavior more obvious.
Signed-off-by: Soeren Moch <smoch@web.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

This commit adds support for Rev. B of a Zodiac Inflight Innovations
development board, mainly intended for DSA and ARINC 429 development
work.
Signed-off-by: Cory Tusar <cory.tusar@pid1solutions.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>