- 13 Apr, 2018 38 commits
-
-
Pan Bian authored
[ Upstream commit 018047a1 ] Function devm_clk_get() returns an ERR_PTR when it fails. However, in function kdwc3_probe(), its return value is not checked, which may result in a bad memory access bug. This patch fixes the bug. Signed-off-by:
Pan Bian <bianpan2016@163.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Anup Patel authored
[ Upstream commit baae03a0 ] The DMA_PREP_FENCE is to be used when preparing Tx descriptor if output of Tx descriptor is to be used by next/dependent Tx descriptor. The DMA_PREP_FENSE will not be set correctly in do_async_gen_syndrome() when calling dma->device_prep_dma_pq() under following conditions: 1. ASYNC_TX_FENCE not set in submit->flags 2. DMA_PREP_FENCE not set in dma_flags 3. src_cnt (= (disks - 2)) is greater than dma_maxpq(dma, dma_flags) This patch fixes DMA_PREP_FENCE usage in do_async_gen_syndrome() taking inspiration from do_async_xor() implementation. Signed-off-by:
Anup Patel <anup.patel@broadcom.com> Reviewed-by:
Ray Jui <ray.jui@broadcom.com> Reviewed-by:
Scott Branden <scott.branden@broadcom.com> Acked-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Mahesh Bandewar authored
[ Upstream commit 66eb9f86 ] Every address gets added with TENTATIVE flag even for the addresses with IFA_F_NODAD flag and dad-work is scheduled for them. During this DAD process we realize it's an address with NODAD and complete the process without sending any probe. However the TENTATIVE flags stays on the address for sometime enough to cause misinterpretation when we receive a NS. While processing NS, if the address has TENTATIVE flag, we mark it DADFAILED and endup with an address that was originally configured as NODAD with DADFAILED. We can't avoid scheduling dad_work for addresses with NODAD but we can avoid adding TENTATIVE flag to avoid this racy situation. Signed-off-by:
Mahesh Bandewar <maheshb@google.com> Acked-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Fabio Estevam authored
[ Upstream commit 79935915 ] When running a stress playback/stop loop test on a mx6wandboard channel swaps can be noticed randomly. Increasing the SGTL5000 LRCLK pad strength to its maximum value fixes the issue, so add the 'lrclk-strength' property to avoid the audio channel swaps. Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Peter Zijlstra authored
[ Upstream commit 8309f86c ] Since the clocksource watchdog will only detect broken TSC after the fact, all TSC based clocks will likely have observed non-continuous values before/when switching away from TSC. Therefore only thing to fully avoid random clock movement when your BIOS randomly mucks with TSC values from SMI handlers is reporting the TSC as unstable at boot. Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Andrea della Porta authored
staging: wlan-ng: prism2mgmt.c: fixed a double endian conversion before calling hfa384x_drvr_setconfig16, also fixes relative sparse warning [ Upstream commit dea20579 ] staging: wlan-ng: prism2mgmt.c: This patches fixes a double endian conversion. cpu_to_le16() was called twice first in prism2mgmt_scan and again inside hfa384x_drvr_setconfig16() for the same variable, hence it was swapped twice. Incidentally, it also fixed the following sparse warning: drivers/staging/wlan-ng/prism2mgmt.c:173:30: warning: incorrect type in assignment (different base types) drivers/staging/wlan-ng/prism2mgmt.c:173:30: expected unsigned short [unsigned] [usertype] word drivers/staging/wlan-ng/prism2mgmt.c:173:30: got restricted __le16 [usertype] <noident> Unfortunately, only compile tested. Signed-off-by:
Andrea della Porta <sfaragnaus@gmail.com> Signed-off-by:
-
Fabio Estevam authored
[ Upstream commit 2fe4bff3 ] Currently the following errors are seen: [ 14.015056] mc13xxx 0-0008: Failed to read IRQ status: -6 [ 27.321093] mc13xxx 0-0008: Failed to read IRQ status: -6 [ 27.411681] mc13xxx 0-0008: Failed to read IRQ status: -6 [ 27.456281] mc13xxx 0-0008: Failed to read IRQ status: -6 [ 30.527106] mc13xxx 0-0008: Failed to read IRQ status: -6 [ 36.596900] mc13xxx 0-0008: Failed to read IRQ status: -6 Also when reading the interrupts via 'cat /proc/interrupts' the PMIC GPIO interrupt counter does not stop increasing. The reason for the storm of interrupts is that the PUS field of register IOMUXC_SW_PAD_CTL_PAD_CSI0_DAT5 is currently configured as: 10 : 100k pullup and the PMIC interrupt is being registered as IRQ_TYPE_LEVEL_HIGH type, which is the correct type as per the MC34708 datasheet. Use the default power on value for the IOMUX, which sets PUS field as: 00: 360k pull down This prevents the spurious PMIC interrupts from happening. Commit e1ffceb0 ("ARM: imx53: qsrb: fix PMIC interrupt level") correctly described the irq type as IRQ_TYPE_LEVEL_HIGH, but missed to update the IOMUX of the PMIC GPIO as pull down. Fixes: e1ffceb0 ("ARM: imx53: qsrb: fix PMIC interrupt level") Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 216c4e9d ] In the current code we accidentally return the successful result from idr_alloc() instead of a negative error pointer. The caller is looking for an error pointer and so it treats the returned value as a valid pointer. This one might be a bit serious because if it lets people get around the kernel's protection for remapping NULL. I'm not sure. Fixes: 75d2364e (PowerCap: Add class driver) Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Doug Berger authored
[ Upstream commit 0c2aa0e4 ] The GISB bus can support addresses beyond 32-bits. So this commit corrects support for reading a captured 64-bit address into a 64-bit variable by obtaining the high bits from the ARB_ERR_CAP_HI_ADDR register (when present) and then outputting the full 64-bit value. It also removes unused definitions. Fixes: 44127b77 ("bus: add Broadcom GISB bus arbiter timeout/error handler") Signed-off-by:
Doug Berger <opendmb@gmail.com> Acked-by:
Gregory Fong <gregory.0xf0@gmail.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Doug Berger authored
[ Upstream commit 856c7ccb ] This commit corrects the bug introduced in commit f8083587 ("bus: brcmstb_gisb: Look up register offsets in a table") such that gisb_write() translates the register enumeration into an offset from the base address for writes as well as reads. Fixes: f8083587 ("bus: brcmstb_gisb: Look up register offsets in a table") Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit cd123007 ] In fs/cifs/smb2pdu.h, we have: #define SMB2_SHARE_TYPE_DISK 0x01 #define SMB2_SHARE_TYPE_PIPE 0x02 #define SMB2_SHARE_TYPE_PRINT 0x03 Knowing that, with the current code, the SMB2_SHARE_TYPE_PRINT case can never trigger and printer share would be interpreted as disk share. So, test the ShareType value for equality instead. Fixes: faaf946a ("CIFS: Add tree connect/disconnect capability for SMB2") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by:
Aurelien Aptel <aaptel@suse.com> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Neil Horman authored
[ Upstream commit 1c4d5f51 ] There are several paths in vmxnet3, where settings changes cause the adapter to be brought down and back up (vmxnet3_set_ringparam among them). Should part of the reset operation fail, these paths call vmxnet3_force_close, which enables all napi instances prior to calling dev_close (with the expectation that vmxnet3_close will then properly disable them again). However, vmxnet3_force_close neglects to clear VMXNET3_STATE_BIT_QUIESCED prior to calling dev_close. As a result vmxnet3_quiesce_dev (called from vmxnet3_close), returns early, and leaves all the napi instances in a enabled state while the device itself is closed. If a device in this state is activated again, napi_enable will be called on already enabled napi_instances, leading to a BUG halt. The fix is to simply enausre that the QUIESCED bit is cleared in vmxnet3_force_close to allow quesence to be completed properly on close. Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> CC: Shrikrishna Khare <skhare@vmware.com> CC: "VMware, Inc." <pv-drivers@vmware.com> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by:
-
Paul Mackerras authored
[ Upstream commit 67325e98 ] The PR KVM implementation of the PAPR HPT hypercalls (H_ENTER etc.) access an image of the HPT in userspace memory using copy_from_user and copy_to_user. Recently, the declarations of those functions were annotated to indicate that the return value must be checked. Since this code doesn't currently check the return value, this causes compile warnings like the ones shown below, and since on PPC the default is to compile arch/powerpc with -Werror, this causes the build to fail. To fix this, we check the return values, and if non-zero, fail the hypercall being processed with a H_FUNCTION error return value. There is really no good error return value to use since PAPR didn't envisage the possibility that the hypervisor may not be able to access the guest's HPT, and H_FUNCTION (function not supported) seems as good as any. The typical compile warnings look like this: CC arch/powerpc/kvm/book3s_pr_papr.o /home/paulus/kernel/kvm/arch/powerpc/kvm/book3s_pr_papr.c: In function ‘kvmppc_h_pr_enter’: /home/paulus/kernel/kvm/arch/powerpc/kvm/book3s_pr_papr.c:53:2: error: ignoring return value of ‘copy_from_user’, declared with attribute warn_unused_result [-Werror=unused-result] copy_from_user(pteg, (void __user *)pteg_addr, sizeof(pteg)); ^ /home/paulus/kernel/kvm/arch/powerpc/kvm/book3s_pr_papr.c:74:2: error: ignoring return value of ‘copy_to_user’, declared with attribute warn_unused_result [-Werror=unused-result] copy_to_user((void __user *)pteg_addr, hpte, HPTE_SIZE); ^ ... etc. Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
-
KT Liao authored
[ Upstream commit d899520b ] One of Elan modules with sample version is 0x74 and hw_version is 0x03 has a bug in absolute mode implementation, so let it run in default PS/2 relative mode. Signed-off-by:
KT Liao <kt.liao@emc.com.tw> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Dmitry Torokhov authored
[ Upstream commit c5928551 ] Before trying to properly initialize the touchpad and generate bunch of errors, let's first see it there is anything at the given address. If we get error, fail silently with -ENXIO. Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit 0fe20faf ] Currently rcode is being initialized to NX_RCODE_SUCCESS and later it is checked to see if it is not NX_RCODE_SUCCESS which is never true. It appears that there is an unintentional missing assignment of rcode from the return of the call to netxen_issue_cmd() that was dropped in an earlier fix, so add it in. Detected by CoverityScan, CID#401900 ("Logically dead code") Fixes: 2dcd5d95 ("netxen_nic: fix cdrp race condition") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Stefan Wahren authored
[ Upstream commit 8d66c30b ] The qca_spi driver causes alignment issues on ARM devices. So fix this by using netdev_alloc_skb_ip_align(). Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Fixes: 291ab06e ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Signed-off-by:
-
Wen Xiong authored
[ Upstream commit f36ea50c ] When formatting NVMe to 512B/4K + T10 DIf/DIX, dd with split op returns "Input/output error". Looks block layer split the bio after calling bio_integrity_prep(bio). This patch fixes the issue. Below is how we debug this issue: (1)format nvme to 4K block # size with type 2 DIF (2)dd with block size bigger than 1024k. oflag=direct dd: error writing '/dev/nvme0n1': Input/output error We added some debug code in nvme device driver. It showed us the first op and the second op have the same bi and pi address. This is not correct. 1st op: nvme0n1 Op:Wr slba 0x505 length 0x100, PI ctrl=0x1400, dsmgmt=0x0, AT=0x0 & RT=0x505 Guard 0x00b1, AT 0x0000, RT physical 0x00000505 RT virtual 0x00002828 2nd op: nvme0n1 Op:Wr slba 0x605 length 0x1, PI ctrl=0x1400, dsmgmt=0x0, AT=0x0 & RT=0x605 ==> This op fails and subsequent 5 retires.. Guard 0x00b1, AT 0x0000, RT physical 0x00000605 RT virtual 0x00002828 With the fix, It showed us both of the first op and the second op have correct bi and pi address. 1st op: nvme2n1 Op:Wr slba 0x505 length 0x100, PI ctrl=0x1400, dsmgmt=0x0, AT=0x0 & RT=0x505 Guard 0x5ccb, AT 0x0000, RT physical 0x00000505 RT virtual 0x00002828 2nd op: nvme2n1 Op:Wr slba 0x605 length 0x1, PI ctrl=0x1400, dsmgmt=0x0, AT=0x0 & RT=0x605 Guard 0xab4c, AT 0x0000, RT physical 0x00000605 RT virtual 0x00003028 Signed-off-by:
Wen Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Rabin Vincent authored
[ Upstream commit 560d3889 ] cifs_relock_file() can perform a down_write() on the inode's lock_sem even though it was already performed in cifs_strict_readv(). Lockdep complains about this. AFAICS, there is no problem here, and lockdep just needs to be told that this nesting is OK. ============================================= [ INFO: possible recursive locking detected ] 4.11.0+ #20 Not tainted --------------------------------------------- cat/701 is trying to acquire lock: (&cifsi->lock_sem){++++.+}, at: cifs_reopen_file+0x7a7/0xc00 but task is already holding lock: (&cifsi->lock_sem){++++.+}, at: cifs_strict_readv+0x177/0x310 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&cifsi->lock_sem); lock(&cifsi->lock_sem); *** DEADLOCK *** May be due to missing lock nesting notation 1 lock held by cat/701: #0: (&cifsi->lock_sem){++++.+}, at: cifs_strict_readv+0x177/0x310 stack backtrace: CPU: 0 PID: 701 Comm: cat Not tainted 4.11.0+ #20 Call Trace: dump_stack+0x85/0xc2 __lock_acquire+0x17dd/0x2260 ? trace_hardirqs_on_thunk+0x1a/0x1c ? preempt_schedule_irq+0x6b/0x80 lock_acquire+0xcc/0x260 ? lock_acquire+0xcc/0x260 ? cifs_reopen_file+0x7a7/0xc00 down_read+0x2d/0x70 ? cifs_reopen_file+0x7a7/0xc00 cifs_reopen_file+0x7a7/0xc00 ? printk+0x43/0x4b cifs_readpage_worker+0x327/0x8a0 cifs_readpage+0x8c/0x2a0 generic_file_read_iter+0x692/0xd00 cifs_strict_readv+0x29f/0x310 generic_file_splice_read+0x11c/0x1c0 do_splice_to+0xa5/0xc0 splice_direct_to_actor+0xfa/0x350 ? generic_pipe_buf_nosteal+0x10/0x10 do_splice_direct+0xb5/0xe0 do_sendfile+0x278/0x3a0 SyS_sendfile64+0xc4/0xe0 entry_SYSCALL_64_fastpath+0x1f/0xbe Signed-off-by:
Rabin Vincent <rabinv@axis.com> Acked-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit f4b23de3 ] It turns out the Linux server has a bug in its implementation of supattr_exclcreat; it returns the set of all attributes, whether or not they are supported by minor version 1. In order to avoid a regression, we therefore apply the supported_attrs as a mask on top of whatever the server sent us. Reported-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Talat Batheesh authored
[ Upstream commit 89c55768 ] Inserting steering rules with illegal ring is an invalid operation, block it. Fixes: 82067281 ('net/mlx4_en: Manage flow steering rules with ethtool') Signed-off-by:
Talat Batheesh <talatb@mellanox.com> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Heiko Carstens authored
[ Upstream commit d04a4c76 ] The perf tool assumes that kernel symbols are never present at address zero. In fact it assumes if functions that map symbols to addresses return zero, that the symbol was not found. Given that s390's _text symbol historically is located at address zero this yields at least a couple of false errors and warnings in one of perf's test cases about not present symbols ("perf test 1"). To fix this simply move the _text symbol to address 0x200, just behind the initial psw and channel program located at the beginning of the kernel image. This is now hard coded within the linker script. I tried a nicer solution which moves the initial psw and channel program into an own section. However that would move the symbols within the "real" head.text section to different addresses, since the ".org" statements within head.S are relative to the head.text section. If there is a new section in front, everything else will be moved. Alternatively I could have adjusted all ".org" statements. But this current solution seems to be the easiest one, since nobody really cares where the _text symbol is actually located. Reported-by:
Zvonko Kosic <zkosic@linux.vnet.ibm.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Kirill Tkhai authored
[ Upstream commit 8896c23d ] alloc_pidmap() advances pid_namespace::last_pid. When first pid allocation fails, then next created process will have pid 2 and pid_ns_prepare_proc() won't be called. So, pid_namespace::proc_mnt will never be initialized (not to mention that there won't be a child reaper). I saw crash stack of such case on kernel 3.10: BUG: unable to handle kernel NULL pointer dereference at (null) IP: proc_flush_task+0x8f/0x1b0 Call Trace: release_task+0x3f/0x490 wait_consider_task.part.10+0x7ff/0xb00 do_wait+0x11f/0x280 SyS_wait4+0x7d/0x110 We may fix this by restore of last_pid in 0 or by prohibiting of futher allocations. Since there was a similar issue in Oleg Nesterov's commit 314a8ad0 ("pidns: fix free_pid() to handle the first fork failure"). and it was fixed via prohibiting allocation, let's follow this way, and do the same. Link: http://lkml.kernel.org/r/149201021004.4863.6762095011554287922.stgit@localhost.localdomainSigned-off-by:
Kirill Tkhai <ktkhai@virtuozzo.com> Acked-by:
Cyrill Gorcunov <gorcunov@openvz.org> Cc: Andrei Vagin <avagin@virtuozzo.com> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul Moore <paul@paul-moore.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@kernel.org> Cc: Serge Hallyn <serge@hallyn.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 146180c0 ] The "DIV_ROUND_UP(size, PAGE_SIZE)" operation can overflow if "size" is more than ULLONG_MAX - PAGE_SIZE. Link: http://lkml.kernel.org/r/20170322111950.GA11279@mwandaSigned-off-by:
-
J. Bruce Fields authored
[ Upstream commit efda760f ] As reported by David Jeffery: "a signal was sent to lockd while lockd was shutting down from a request to stop nfs. The signal causes lockd to call restart_grace() which puts the lockd_net structure on the grace list. If this signal is received at the wrong time, it will occur after lockd_down_net() has called locks_end_grace() but before lockd_down_net() stops the lockd thread. This leads to lockd putting the lockd_net structure back on the grace list, then exiting without anything removing it from the list." So, perform the final locks_end_grace() from the the lockd thread; this ensures it's serialized with respect to restart_grace(). Reported-by:
David Jeffery <djeffery@redhat.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Grygorii Strashko authored
[ Upstream commit 48f5bccc ] When users set flow control using ethtool the bits are set properly in the CPGMAC_SL MACCONTROL register, but the FIFO depth in the respective Port n Maximum FIFO Blocks (Pn_MAX_BLKS) registers remains set to the minimum size reset value. When receive flow control is enabled on a port, the port's associated FIFO block allocation must be adjusted. The port RX allocation must increase to accommodate the flow control runout. The TRM recommends numbers of 5 or 6. Hence, apply required Port FIFO configuration to Pn_MAX_BLKS.Pn_TX_MAX_BLKS=0xF and Pn_MAX_BLKS.Pn_RX_MAX_BLKS=0x5 during interface initialization. Cc: Schuyler Patton <spatton@ti.com> Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
-
Jim Baxter authored
[ Upstream commit aeca3a77 ] The zero padding that is added to NTB's does not zero the memory correctly. This is because the skb_put modifies the value of skb_out->len which results in the memset command not setting any memory to zero as (ctx->tx_max - skb_out->len) == 0. I have resolved this by storing the size of the memory to be zeroed before the skb_put and using this in the memset call. Signed-off-by:
Jim Baxter <jim_baxter@mentor.com> Reviewed-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit cf9806f3 ] We should unlock and re-enable IRQs if this allocation fails. Fixes: 25930707 ("ipmi: Add SMBus interface driver (SSIF) ") Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
-
Kees Cook authored
[ Upstream commit df5303a8 ] Using memcpy() from a string that is shorter than the length copied means the destination buffer is being filled with arbitrary data from the kernel rodata segment. Instead, use strncpy() which will fill the trailing bytes with zeros. This was found with the future CONFIG_FORTIFY_SOURCE feature. Cc: Daniel Micay <danielmicay@gmail.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Kees Cook authored
[ Upstream commit 9e4eb1ce ] Using memcpy() from a string that is shorter than the length copied means the destination buffer is being filled with arbitrary data from the kernel rodata segment. Instead, use strncpy() which will fill the trailing bytes with zeros. This was found with the future CONFIG_FORTIFY_SOURCE feature. Cc: Daniel Micay <danielmicay@gmail.com> Signed-off-by:
-
Luca Coelho authored
[ Upstream commit f8860ce8 ] If ieee80211_hw_restart() is called during authentication, the authentication process will continue, causing the driver to be called in a wrong state. This ultimately causes an oops in the iwlwifi driver (at least). This fixes bugzilla 195299 partly. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195299Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Steffen Klassert authored
[ Upstream commit d90c9024 ] The sadb_x_sec_len is stored in the unit 'byte divided by eight'. So we have to multiply this value by eight before we can do size checks. Otherwise we may get a slab-out-of-bounds when we memcpy the user sec_ctx. Fixes: df71837d ("[LSM-IPSec]: Security association restriction.") Reported-by:
Andrey Konovalov <andreyknvl@google.com> Tested-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Bart Van Assche authored
[ Upstream commit 55d69427 ] Let the target core check the CMD_T_ABORTED flag instead of the SRP target driver. Hence remove the transport_check_aborted_status() call. Since state == SRPT_STATE_CMD_RSP_SENT is something that really should not happen, do not try to recover if srpt_queue_response() is called for an I/O context that is in that state. This patch is a bug fix because the srpt_abort_cmd() call is misplaced - if that function is called from srpt_queue_response() it should either be called before the command state is changed or after the response has been sent. Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Cc: Doug Ledford <dledford@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Andy Grover <agrover@redhat.com> Cc: David Disseldorp <ddiss@suse.de> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit 0048fdd0 ] If the server returns NFS4ERR_CONN_NOT_BOUND_TO_SESSION because we are trunking, then RECLAIM_COMPLETE must handle that by calling nfs4_schedule_session_recovery() and then retrying. Reported-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
-
Josh Poimboeuf authored
[ Upstream commit 42fc6c6c ] Andrey Konovalov reported the following warning while fuzzing the kernel with syzkaller: WARNING: kernel stack regs at ffff8800686869f8 in a.out:4933 has bad 'bp' value c3fc855a10167ec0 The unwinder dump revealed that RBP had a bad value when an interrupt occurred in csum_partial_copy_generic(). That function saves RBP on the stack and then overwrites it, using it as a scratch register. That's problematic because it breaks stack traces if an interrupt occurs in the middle of the function. Replace the usage of RBP with another callee-saved register (R15) so stack traces are no longer affected. Reported-by:
Josh Poimboeuf <jpoimboe@redhat.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: David S . Miller <davem@davemloft.net> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Kostya Serebryany <kcc@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: linux-sctp@vger.kernel.org Cc: netdev <netdev@vger.kernel.org> Cc: syzkaller <syzkaller@googlegroups.com> Link: http://lkml.kernel.org/r/4b03a961efda5ec9bfe46b7b9c9ad72d1efad343.1493909486.git.jpoimboe@redhat.comSigned-off-by:
-
Pan Bian authored
[ Upstream commit 75892900 ] Function devm_regmap_init_mmio() returns an ERR_PTR on error. However, in function snvs_rtc_probe() its return value is checked against NULL. This patch fixes it by checking the return value with IS_ERR(). Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
-
Julia Cartwright authored
[ Upstream commit 3d05f3ae ] On mainline, there is no functional difference, just less code, and symmetric lock/unlock paths. On PREEMPT_RT builds, this fixes the following warning, seen by Alexander GQ Gerasiov, due to the sleeping nature of spinlocks. BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:993 in_atomic(): 0, irqs_disabled(): 1, pid: 58, name: kworker/u12:1 CPU: 5 PID: 58 Comm: kworker/u12:1 Tainted: G W 4.9.20-rt16-stand6-686 #1 Hardware name: Supermicro SYS-5027R-WRF/X9SRW-F, BIOS 3.2a 10/28/2015 Workqueue: writeback wb_workfn (flush-253:0) Call Trace: dump_stack+0x47/0x68 ? migrate_enable+0x4a/0xf0 ___might_sleep+0x101/0x180 rt_spin_lock+0x17/0x40 add_stripe_bio+0x4e3/0x6c0 [raid456] ? preempt_count_add+0x42/0xb0 raid5_make_request+0x737/0xdd0 [raid456] Reported-by:
Alexander GQ Gerasiov <gq@redlab-i.ru> Tested-by:
Julia Cartwright <julia@ni.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Johannes Berg authored
[ Upstream commit 842be75c ] Due to the way I did the RX bitrate conversions in mac80211 with spatch, going setting flags to setting the value, many drivers now don't set the bandwidth value for 20 MHz, since with the flags it wasn't necessary to (there was no 20 MHz flag, only the others.) Rather than go through and try to fix up all the drivers, instead renumber the enum so that 20 MHz, which is the typical bandwidth, actually has the value 0, making those drivers all work again. If VHT was hit used with a driver not reporting it, e.g. iwlmvm, this manifested in hitting the bandwidth warning in cfg80211_calculate_bitrate_vht(). Reported-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
- 08 Apr, 2018 2 commits
-
-
Greg Kroah-Hartman authored
-
Greg Kroah-Hartman authored
This reverts commit 2fe832c6 which is commit 53c81e95 upstream. Ben writes that there are a number of follow-on patches needed to fix this up, but they get complex to backport, and some custom fixes are needed, so let's just revert this and wait for a "real" set of patches to resolve this to be submitted if it is really needed. Reported-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Cc: Petr Vorel <pvorel@suse.cz> Cc: Alexey Kodanev <alexey.kodanev@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
