- 09 Jul, 2014 21 commits
-
-
Kees Cook authored
This makes sure a format string cannot accidentally leak into a device name. Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Guenter Roeck authored
Both systems need non-standard parameters for fan multiplier and maximum fan speed. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Cc: Andreas Mohr <andi@lisas.de> Signed-off-by:
-
Guenter Roeck authored
Some Dell laptops support fan speeds of {0, 1, 2, 3} instead of {0, 1, 2}. Add a define for it. Signed-off-by: -
Guenter Roeck authored
Newer Dell systems provide more granular fan speed selection. Add support for it. Signed-off-by:
-
Guenter Roeck authored
Labels are known to be wrong for several Dell laptops. For example, a single fan may be shown as right fan when in reality it sits on the left side of the chassis. Drop all labels to avoid such inaccuracies. Users can select labels in the sensors configuration file instead if desired. Signed-off-by:
-
Dan Carpenter authored
The CA91CX42_DCTL_VDW_M define is cut and pasted twice so we can delete the second instance. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Arnd Bergmann authored
commit dabd1468 "PCMCIA: sa1111: remove duplicated initializers" incorrectly moved some code into the pcmcia_jornada720_init, causing a few build errors, and for unknown reasons, the driver lacks an inclusion of <linux/io.h>, so we get the build errors, and more: sa1111_jornada720.c: In function 'pcmcia_jornada720_init': sa1111_jornada720.c:101:3: error: implicit declaration of function 'IOMEM' [-Werror=implicit-function-declaration] GRER |= 0x00000002; ^ sa1111_jornada720.c:104:3: warning: passing argument 1 of 'sa1111_set_io_dir' from incompatible pointer type [enabled by default] sa1111_set_io_dir(dev, pin, 0, 0); ^ This patch uses the SA1111_DEV() to convert the dev pointer to the correct type before passing it and adds the missing include. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Kristoffer Ericson <kristoffer.ericson@gmail.com> Cc: linux-pcmcia@lists.infradead.org Signed-off-by:
-
Arnd Bergmann authored
The lubbock platform uses the sa1111 companion chip with a pxa250 CPU, which means it requires both the PCMCIA_SA1111 and the PCMCIA_PXA2XX code to be built into the kernel. Unfortunately, the Makefile and Kconfig don't agree on how this is accomplished, leading to a situation where you get this link error when building a lubbock kernel with PCMCIA_SA1111 enabled but PCMCIA_PXA2XX disabled: ERROR: "pxa2xx_configure_sockets" [drivers/pcmcia/sa1111_cs.ko] undefined! ERROR: "pxa2xx_drv_pcmcia_ops" [drivers/pcmcia/sa1111_cs.ko] undefined! ERROR: "pxa2xx_drv_pcmcia_add_one" [drivers/pcmcia/sa1111_cs.ko] undefined! This patch changes the Kconfig code to disallow that particular configuration. Signed-off-by:
-
Arnd Bergmann authored
When building a iPAQ H3100-only kernel with PCMCIA enabled, we get this build error: ERROR: "pcmcia_h3600_init" [drivers/pcmcia/sa1100_cs.ko] undefined! The defconfig normally works fine because it enables both H3100 and H3600 support. This patch fixes the Makefile to build the driver if at least one of the two machines are selected. Signed-off-by:
-
Jason Wang authored
All its callers depends on the return value of -ENOBUFS to reallocate a bigger buffer and retry the receiving. So there's no need to call pr_err() here since it was not a real issue, otherwise syslog will be flooded by this false warning. Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
Yue Zhang authored
hv_fcopy_daemon fails to overwrite a file if the target file already exits. Add O_TRUNC flag on opening. Signed-off-by:
Yue Zhang <yuezha@microsoft.com> Signed-off-by:
-
Terry Chia authored
This starts to address https://bugzilla.kernel.org/show_bug.cgi?id=10770Signed-off-by:
Terry Chia <terrycwk1994@gmail.com> Signed-off-by:
-
Fabian Frederick authored
replace IS_ERR/PTR_ERR Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Fabian Frederick <fabf@skynet.be> Signed-off-by:
-
Alexander Usyskin authored
Add WPT second mei interface. Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Tomas Winkler authored
Add sysfs attributes Documentation entries for /sys/class/mei Signed-off-by:
-
Alexander Usyskin authored
We need to support more then one mei interface hence the simple misc devices is not longer an option In order not break the user space a device with pci function 0 need to be linked to /dev/mei Signed-off-by:
-
Sebastian Ott authored
GenWQE used to call pci_enable_msi_block to allocate a desired number of MSI's. If that was not possible pci_enable_msi_block returned with a smaller number which might be possible to allocate. GenWQE then called pci_enable_msi_block with that number. Since commit a30d0108 "GenWQE: Use pci_enable_msi_exact() instead of pci_enable_msi_block()" pci_enable_msi_exact is used which fails if the desired number of MSI's was not possible to allocate. Change GenWQE to use pci_enable_msi_range to restore the old behavior. Signed-off-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by:
Alexander Gordeev <agordeev@redhat.com> Signed-off-by:
-
Kleber Sacilotto de Souza authored
Increase genwqe driver version number. Signed-off-by:
Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com> Acked-by:
Frank Haverkamp <haver@linux.vnet.ibm.com> Signed-off-by:
-
Kleber Sacilotto de Souza authored
Currently, in the event of a fatal hardware error, the driver tries a recovery procedure that calls pci_reset_function() to reset the card. This is not sufficient in some cases, needing a fundamental reset to bring the card back. This patch implements a call to the platform fundamental reset procedure on the error recovery path if GENWQE_PLATFORM_ERROR_RECOVERY is enabled. This is implemented by default only on PPC64, since this can cause problems on other archs, e.g. zSeries, where the platform has its own recovery procedures, leading to a potencial race conditition. For these cases, the recovery is kept as it was before. Signed-off-by:
-
Kleber Sacilotto de Souza authored
This patch implements the callbacks and functions necessary to have EEH recovery support. It adds a config option to enable or disable explicit calls to trigger platform specific mechanisms on error recovery paths. This option is enabled by default only on PPC64 systems and can be overritten via debugfs. If this option is enabled, on the error recovery path the driver will call pci_channel_offline() to check for error condition and issue non-raw MMIO reads to trigger early EEH detection in case of hardware failures. This is necessary since the driver MMIO helper funtions use raw accessors. Signed-off-by:
-
Kleber Sacilotto de Souza authored
This patch adds an interface on sysfs for userspace to request a card bitstream reload. It sets the appropriate register and try to perform a fundamental reset on the PCIe slot for the card to reload the bitstream from the chosen partition. Signed-off-by:
-
- 08 Jul, 2014 1 commit
-
-
Himangi Saraogi authored
nhi->rx_rings does not have type as struct tb_ring *, as it is a double pointer so the elements of the array should have pointer type, not structure type. The Coccinelle semantic patch that makes this change is as follows: // <smpl> @disable sizeof_type_expr@ type T; T **x; @@ x = <+...sizeof( - T + *x )...+> // </smpl> Signed-off-by:
Himangi Saraogi <himangi774@gmail.com> Acked-by:
Julia Lawall <julia.lawall@lip6.fr> Cc: Andreas Noever <andreas.noever@gmail.com> Signed-off-by:
-
- 23 Jun, 2014 1 commit
-
-
Arnd Bergmann authored
commit 94859308 "w1: new w1_ds2406 driver" added a new driver that uses the crc16 library, but didn't ensure that the core is there. This adds the necessary Kconfig statements, just like we have it for other w1 drivers. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Scott Alfter <scott@alfter.us> Cc: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by:
-
- 21 Jun, 2014 1 commit
-
-
Andreas Noever authored
We use __crc32c_le in ctl.c. So make sure that the dependency is there. Reported-by:
Andreas Noever <andreas.noever@gmail.com> Signed-off-by:
-
- 20 Jun, 2014 16 commits
-
-
Andreas Noever authored
tb_eeprom_get_drom_offset is local to this file. Signed-off-by:
-
Andreas Noever authored
Force enum tb_drom_entry_type to unsigned to fix the following error: drivers/thunderbolt/eeprom.c:202:39: error: dubious one-bit signed bitfield Signed-off-by:
-
Andreas Noever authored
tb_find_cap in cap.c takes an enum tb_cap and not an u32. Fix the declaration in tb.h. Signed-off-by:
-
Andreas Noever authored
Thunderbolt packets are big endian. Cast pkg->buffer to __be32* when accessing the checksum. Reported-by:
-
Arnd Bergmann authored
The result of "sizeof(struct tb_drom_entry_port)" is a size_t, which is not necessarily the same as 'long', so we should use the appropriate %z format string instead of %l. Signed-off-by:
-
Arnd Bergmann authored
The thunderbolt drivers cannot be built if CONFIG_PCI is disabled, better add an explicit Kconfig dependency. The "default no" line is redundant and can be removed at the same time. Signed-off-by:
-
Sachin Kamat authored
'nhi_ids' is local to this file. Signed-off-by:
Sachin Kamat <sachin.kamat@samsung.com> Acked-by:
-
Sachin Kamat authored
'descriptors' is a pointer. Use NULL isntead of 0. Signed-off-by:
-
Sachin Kamat authored
The function returns a pointer. Hence return NULL instead of 0. Signed-off-by:
-
Sachin Kamat authored
The function returns a pointer. Hence return NULL instead of 0. Signed-off-by:
-
Sachin Kamat authored
Fixes the below error: drivers/thunderbolt/switch.c:347:2: error: implicit declaration of function ‘kzalloc’ [-Werror=implicit-function-declaration] drivers/thunderbolt/switch.c:381:2: error: implicit declaration of function ‘kcalloc’ [-Werror=implicit-function-declaration] Signed-off-by:
-
Sachin Kamat authored
Fixes the below error: drivers/thunderbolt/eeprom.c:407:2: error: implicit declaration of function ‘kzalloc’ [-Werror=implicit-function-declaration] drivers/thunderbolt/eeprom.c:444:2: error: implicit declaration of function ‘kfree’ [-Werror=implicit-function-declaration] Signed-off-by:
-
Fjodor Schelichow authored
This patch replaces all calls to the "printk" function within the "masters" subdirectory by calls to the appropriate "pr_*" function thus addressing the following warning generated by the checkpatch script: WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... Signed-off-by:Fjodor Schelichow <fjodor.schelichow@hotmail.com> Signed-off-by:
Roman Sommer <romsom2@yahoo.de> Acked-by:
Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by:
-
Fjodor Schelichow authored
This patch replaces all calls to the "printk" function within the main "w1" directory by calls to the appropriate "pr_*" function thus addressing the following warning generated by the checkpatch script: WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... Signed-off-by: -
Fjodor Schelichow authored
This patch replaces all calls to the "printk" function within the "slaves" subdirectory by calls to the appropriate "pr_*" function thus addressing the following warning generated by the checkpatch script: WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... Signed-off-by: -
Scott Alfter authored
Some preliminary work at making use of this driver led me to implement CRC-16 checks on read and write to deal with the occasional glitchiness of the 1-Wire bus. The revised driver (attached) returns an I/O error if the CRC check fails. When reading the chip's state, either you get a valid indication or you get an I/O error. When changing its state, either the change is successful or an I/O error is returned. Signed-off-by:
-
