- 23 Jan, 2018 40 commits
-
-
Marc Kleine-Budde authored
commit d4689846 upstream. If an invalid CANFD frame is received, from a driver or from a tun interface, a Kernel warning is generated. This patch replaces the WARN_ONCE by a simple pr_warn_once, so that a kernel, bootet with panic_on_warn, does not panic. A printk seems to be more appropriate here. Reported-by: syzbot+e3b775f40babeff6e68b@syzkaller.appspotmail.com Suggested-by:
Dmitry Vyukov <dvyukov@google.com> Acked-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Marc Kleine-Budde authored
commit 8cb68751 upstream. If an invalid CAN frame is received, from a driver or from a tun interface, a Kernel warning is generated. This patch replaces the WARN_ONCE by a simple pr_warn_once, so that a kernel, bootet with panic_on_warn, does not panic. A printk seems to be more appropriate here. Reported-by: syzbot+4386709c0c1284dca827@syzkaller.appspotmail.com Suggested-by:
-
Stephane Grosjean authored
commit d8a243af upstream. In some rare conditions when running one PEAK USB-FD interface over a non high-speed USB controller, one useless USB fragment might be sent. This patch fixes the way a USB command is fragmented when its length is greater than 64 bytes and when the underlying USB controller is not a high-speed one. Signed-off-by:
Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by:
-
Thomas Petazzoni authored
commit 56aeb07c upstream. MPP7 is currently muxed as "gpio", but this function doesn't exist for MPP7, only "gpo" is available. This causes the following error: kirkwood-pinctrl f1010000.pin-controller: unsupported function gpio on pin mpp7 pinctrl core: failed to register map default (6): invalid type given kirkwood-pinctrl f1010000.pin-controller: error claiming hogs: -22 kirkwood-pinctrl f1010000.pin-controller: could not claim hogs: -22 kirkwood-pinctrl f1010000.pin-controller: unable to register pinctrl driver kirkwood-pinctrl: probe of f1010000.pin-controller failed with error -22 So the pinctrl driver is not probed, all device drivers (including the UART driver) do a -EPROBE_DEFER, and therefore the system doesn't really boot (well, it boots, but with no UART, and no devices that require pin-muxing). Back when the Device Tree file for this board was introduced, the definition was already wrong. The pinctrl driver also always described as "gpo" this function for MPP7. However, between Linux 4.10 and 4.11, a hog pin failing to be muxed was turned from a simple warning to a hard error that caused the entire pinctrl driver probe to bail out. This is probably the result of commit 61187142 ("pinctrl: core: Fix pinctrl_register_and_init() with pinctrl_enable()"). This commit fixes the Device Tree to use the proper "gpo" function for MPP7, which fixes the boot of OpenBlocks A7, which was broken since Linux 4.11. Fixes: f24b56cb ("ARM: kirkwood: add support for OpenBlocks A7 platform") Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
Maxime Ripard authored
commit c13e7f31 upstream. The DRM driver most notably, but also out of tree drivers (for now) like the VPU or GPU drivers, are quite big consumers of large, contiguous memory buffers. However, the sunxi_defconfig doesn't enable CMA in order to mitigate that, which makes them almost unusable. Enable it to make sure it somewhat works. Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Gregory CLEMENT authored
commit e3af9f7c upstream. On the CP modules we found on Armada 7K/8K, many IP block actually also need a "functional" clock (from the bus). This patch add them which allows to fix some issues hanging the kernel: If Ethernet and sdhci driver are built as modules and sdhci was loaded first then the kernel hang. Fixes: bb16ea17 ("mmc: sdhci-xenon: Fix clock resource by adding an optional bus clock") Reported-by:
Riku Voipio <riku.voipio@linaro.org> Signed-off-by:
-
Arnd Bergmann authored
commit b7563e27 upstream. Stefan Wahren reports a problem with a warning fix that was merged for v4.15: we had lots of device nodes with a 'phys' property pointing to a device node that is not compliant with the binding documented in Documentation/devicetree/bindings/phy/phy-bindings.txt This generally works because USB HCD drivers that support both the generic phy subsystem and the older usb-phy subsystem ignore most errors from phy_get() and related calls and then use the usb-phy driver instead. However, it turns out that making the usb-nop-xceiv device compatible with the generic-phy binding changes the phy_get() return code from -EINVAL to -EPROBE_DEFER, and the dwc2 usb controller driver for bcm2835 now returns -EPROBE_DEFER from its probe function rather than ignoring the failure, breaking all USB support on raspberry-pi when CONFIG_GENERIC_PHY is enabled. The same code is used in the dwc3 driver and the usb_add_hcd() function, so a reasonable assumption would be that many other platforms are affected as well. I have reviewed all the related patches and concluded that "usb-nop-xceiv" is the only USB phy that is affected by the change, and since it is by far the most commonly referenced phy, all the other USB phy drivers appear to be used in ways that are are either safe in DT (they don't use the 'phys' property), or in the driver (they already ignore -EPROBE_DEFER from generic-phy when usb-phy is available). To work around the problem, this adds a special case to _of_phy_get() so we ignore any PHY node that is compatible with "usb-nop-xceiv", as we know that this can never load no matter how much we defer. In the future, we might implement a generic-phy driver for "usb-nop-xceiv" and then remove this workaround. Since we generally want older kernels to also want to work with the fixed devicetree files, it would be good to backport the patch into stable kernels as well (3.13+ are possibly affected), even though they don't contain any of the patches that may have caused regressions. Fixes: 014d6da6 ARM: dts: bcm283x: Fix DTC warnings about missing phy-cells Fixes: c5bbf358 arm: dts: nspire: Add missing #phy-cells to usb-nop-xceiv Fixes: 44e5dced arm: dts: marvell: Add missing #phy-cells to usb-nop-xceiv Fixes: f568f6f5 ARM: dts: omap: Add missing #phy-cells to usb-nop-xceiv Fixes: d745d5f2 ARM: dts: imx51-zii-rdu1: Add missing #phy-cells to usb-nop-xceiv Fixes: 915fbe59 ARM: dts: imx: Add missing #phy-cells to usb-nop-xceiv Link: https://marc.info/?l=linux-usb&m=151518314314753&w=2 Link: https://patchwork.kernel.org/patch/10158145/ Cc: Felipe Balbi <balbi@kernel.org> Cc: Eric Anholt <eric@anholt.net> Tested-by:
Stefan Wahren <stefan.wahren@i2se.com> Acked-by:
Rob Herring <robh@kernel.org> Tested-by:
Hans Verkuil <hans.verkuil@cisco.com> Acked-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit 1ebe1eaf upstream. Since enums do not get converted by the TRACE_EVENT macro into their values, the event format displaces the enum name and not the value. This breaks tools like perf and trace-cmd that need to interpret the raw binary data. To solve this, an enum map was created to convert these enums into their actual numbers on boot up. This is done by TRACE_EVENTS() adding a TRACE_DEFINE_ENUM() macro. Some enums were not being converted. This was caused by an optization that had a bug in it. All calls get checked against this enum map to see if it should be converted or not, and it compares the call's system to the system that the enum map was created under. If they match, then they call is processed. To cut down on the number of iterations needed to find the maps with a matching system, since calls and maps are grouped by system, when a match is made, the index into the map array is saved, so that the next call, if it belongs to the same system as the previous call, could start right at that array index and not have to scan all the previous arrays. The problem was, the saved index was used as the variable to know if this is a call in a new system or not. If the index was zero, it was assumed that the call is in a new system and would keep incrementing the saved index until it found a matching system. The issue arises when the first matching system was at index zero. The next map, if it belonged to the same system, would then think it was the first match and increment the index to one. If the next call belong to the same system, it would begin its search of the maps off by one, and miss the first enum that should be converted. This left a single enum not converted properly. Also add a comment to describe exactly what that index was for. It took me a bit too long to figure out what I was thinking when debugging this issue. Link: http://lkml.kernel.org/r/717BE572-2070-4C1E-9902-9F2E0FEDA4F8@oracle.com Fixes: 0c564a53 ("tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values") Reported-by:
Chuck Lever <chuck.lever@oracle.com> Teste-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Johan Hovold authored
commit 5b189201 upstream. A helper purported to look up a child node based on its name was using the wrong of-helper and ended up prematurely freeing the parent of-node while searching the whole device tree depth-first starting at the parent node. Fixes: 64b9e4d8 ("input: twl4030-vibra: Support for DT booted kernel") Fixes: e661d0a0 ("Input: twl4030-vibra - fix ERROR: Bad of_node_put() warning") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Johan Hovold authored
commit dcaf12a8 upstream. Fix child-node lookup during probe, which ended up searching the whole device tree depth-first starting at parent rather than just matching on its children. Later sanity checks on node properties (which would likely be missing) should prevent this from causing much trouble however, especially as the original premature free of the parent node has already been fixed separately (but that "fix" was apparently never backported to stable). Fixes: e7ec014a ("Input: twl6040-vibra - update for device tree support") Fixes: c52c545e ("Input: twl6040-vibra - fix DT node memory management") Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: H. Nikolaus Schaller <hns@goldelico.com> (on Pyra OMAP5 hardware) Signed-off-by:
-
Johan Hovold authored
commit 906bf7da upstream. Fix child node-lookup during probe, which ended up searching the whole device tree depth-first starting at parent rather than just matching on its children. To make things worse, the parent node was prematurely freed, while the child node was leaked. Fixes: 2e57d567 ("mfd: 88pm860x: Device tree support") Signed-off-by:
-
Nick Desaulniers authored
commit 55edde9f upstream. KASAN found a UAF due to dangling pointer. As the report below says, rmi_f11_attention() accesses drvdata->attn_data.data, which was freed in rmi_irq_fn. [ 311.424062] BUG: KASAN: use-after-free in rmi_f11_attention+0x526/0x5e0 [rmi_core] [ 311.424067] Read of size 27 at addr ffff88041fd610db by task irq/131-i2c_hid/1162 [ 311.424075] CPU: 0 PID: 1162 Comm: irq/131-i2c_hid Not tainted 4.15.0-rc8+ #2 [ 311.424076] Hardware name: Razer Blade Stealth/Razer, BIOS 6.05 01/26/2017 [ 311.424078] Call Trace: [ 311.424086] dump_stack+0xae/0x12d [ 311.424090] ? _atomic_dec_and_lock+0x103/0x103 [ 311.424094] ? show_regs_print_info+0xa/0xa [ 311.424099] ? input_handle_event+0x10b/0x810 [ 311.424104] print_address_description+0x65/0x229 [ 311.424108] kasan_report.cold.5+0xa7/0x281 [ 311.424117] rmi_f11_attention+0x526/0x5e0 [rmi_core] [ 311.424123] ? memcpy+0x1f/0x50 [ 311.424132] ? rmi_f11_attention+0x526/0x5e0 [rmi_core] [ 311.424143] ? rmi_f11_probe+0x1e20/0x1e20 [rmi_core] [ 311.424153] ? rmi_process_interrupt_requests+0x220/0x2a0 [rmi_core] [ 311.424163] ? rmi_irq_fn+0x22c/0x270 [rmi_core] [ 311.424173] ? rmi_process_interrupt_requests+0x2a0/0x2a0 [rmi_core] [ 311.424177] ? free_irq+0xa0/0xa0 [ 311.424180] ? irq_finalize_oneshot.part.39+0xeb/0x180 [ 311.424190] ? rmi_process_interrupt_requests+0x2a0/0x2a0 [rmi_core] [ 311.424193] ? irq_thread_fn+0x3d/0x80 [ 311.424197] ? irq_finalize_oneshot.part.39+0x180/0x180 [ 311.424200] ? irq_thread+0x21d/0x290 [ 311.424203] ? irq_thread_check_affinity+0x170/0x170 [ 311.424207] ? remove_wait_queue+0x150/0x150 [ 311.424212] ? kasan_unpoison_shadow+0x30/0x40 [ 311.424214] ? __init_waitqueue_head+0xa0/0xd0 [ 311.424218] ? task_non_contending.cold.55+0x18/0x18 [ 311.424221] ? irq_forced_thread_fn+0xa0/0xa0 [ 311.424226] ? irq_thread_check_affinity+0x170/0x170 [ 311.424230] ? kthread+0x19e/0x1c0 [ 311.424233] ? kthread_create_worker_on_cpu+0xc0/0xc0 [ 311.424237] ? ret_from_fork+0x32/0x40 [ 311.424244] Allocated by task 899: [ 311.424249] kasan_kmalloc+0xbf/0xe0 [ 311.424252] __kmalloc_track_caller+0xd9/0x1f0 [ 311.424255] kmemdup+0x17/0x40 [ 311.424264] rmi_set_attn_data+0xa4/0x1b0 [rmi_core] [ 311.424269] rmi_raw_event+0x10b/0x1f0 [hid_rmi] [ 311.424278] hid_input_report+0x1a8/0x2c0 [hid] [ 311.424283] i2c_hid_irq+0x146/0x1d0 [i2c_hid] [ 311.424286] irq_thread_fn+0x3d/0x80 [ 311.424288] irq_thread+0x21d/0x290 [ 311.424291] kthread+0x19e/0x1c0 [ 311.424293] ret_from_fork+0x32/0x40 [ 311.424296] Freed by task 1162: [ 311.424300] kasan_slab_free+0x71/0xc0 [ 311.424303] kfree+0x90/0x190 [ 311.424311] rmi_irq_fn+0x1b2/0x270 [rmi_core] [ 311.424319] rmi_irq_fn+0x257/0x270 [rmi_core] [ 311.424322] irq_thread_fn+0x3d/0x80 [ 311.424324] irq_thread+0x21d/0x290 [ 311.424327] kthread+0x19e/0x1c0 [ 311.424330] ret_from_fork+0x32/0x40 [ 311.424334] The buggy address belongs to the object at ffff88041fd610c0 which belongs to the cache kmalloc-64 of size 64 [ 311.424340] The buggy address is located 27 bytes inside of 64-byte region [ffff88041fd610c0, ffff88041fd61100) [ 311.424344] The buggy address belongs to the page: [ 311.424348] page:ffffea00107f5840 count:1 mapcount:0 mapping: (null) index:0x0 [ 311.424353] flags: 0x17ffffc0000100(slab) [ 311.424358] raw: 0017ffffc0000100 0000000000000000 0000000000000000 00000001802a002a [ 311.424363] raw: dead000000000100 dead000000000200 ffff8804228036c0 0000000000000000 [ 311.424366] page dumped because: kasan: bad access detected [ 311.424369] Memory state around the buggy address: [ 311.424373] ffff88041fd60f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 311.424377] ffff88041fd61000: fb fb fb fb fb fb fb fb fc fc fc fc fb fb fb fb [ 311.424381] >ffff88041fd61080: fb fb fb fb fc fc fc fc fb fb fb fb fb fb fb fb [ 311.424384] ^ [ 311.424387] ffff88041fd61100: fc fc fc fc fb fb fb fb fb fb fb fb fc fc fc fc [ 311.424391] ffff88041fd61180: fb fb fb fb fb fb fb fb fc fc fc fc fb fb fb fb Signed-off-by:
Nick Desaulniers <nick.desaulniers@gmail.com> Signed-off-by:
-
Nir Perry authored
commit 4d94e776 upstream. The fix for handling two-finger scroll (i4a646580 - "Input: ALPS - fix two-finger scroll breakage in right side on ALPS touchpad") introduced a minor "typo" that broke decoding of multi-touch events are decoded on some ALPS touchpads. For example, tapping with three-fingers can no longer be used to emulate middle-mouse-button (the kernel doesn't recognize this as the proper event, and doesn't report it correctly to userspace). This affects touchpads that use SS4 "plus" protocol variant, like those found on Dell E7270 & E7470 laptops (tested on E7270). First, probably the code in alps_decode_ss4_v2() for case SS4_PACKET_ID_MULTI used inconsistent indices to "f->mt[]". You can see 0 & 1 are used for the "if" part but 2 & 3 are used for the "else" part. Second, in the previous patch, new macros were introduced to decode X coordinates specific to the SS4 "plus" variant, but the macro to define the maximum X value wasn't changed accordingly. The macros to decode X values for "plus" variant are effectively shifted right by 1 bit, but the max wasn't shifted too. This causes the driver to incorrectly handle "no data" cases, which also interfered with how multi-touch was handled. Fixes: 4a646580 ("Input: ALPS - fix two-finger scroll breakage...") Signed-off-by:
Nir Perry <nirperry@gmail.com> Reviewed-by:
Masaki Ota <masaki.ota@jp.alps.com> Signed-off-by:
-
Tom Lendacky authored
commit 107cd253 upstream. Currently the BSP microcode update code examines the initrd very early in the boot process. If SME is active, the initrd is treated as being encrypted but it has not been encrypted (in place) yet. Update the early boot code that encrypts the kernel to also encrypt the initrd so that early BSP microcode updates work. Tested-by:
Gabriel Craciunescu <nix.or.die@gmail.com> Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by:
Borislav Petkov <bp@suse.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180110192634.6026.10452.stgit@tlendack-t1.amdoffice.netSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Tero Kristo authored
commit 3c4d296e upstream. MMC3 hwmod data is missing the module_offs definition. MMC3 belongs under core, so add CORE_MOD for it. Signed-off-by:
Tero Kristo <t-kristo@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Cc: Adam Ford <aford173@gmail.com> Fixes: 6c0afb50 ("clk: ti: convert to use proper register definition for all accesses") Signed-off-by:
-
Tom Lendacky authored
commit cc5f01e2 upstream. In preparation for encrypting more than just the kernel, the encryption support in sme_encrypt_kernel() needs to support 4KB page aligned encryption instead of just 2MB large page aligned encryption. Update the routines that populate the PGD to support non-2MB aligned addresses. This is done by creating PTE page tables for the start and end portion of the address range that fall outside of the 2MB alignment. This results in, at most, two extra pages to hold the PTE entries for each mapping of a range. Tested-by:
-
Tom Lendacky authored
commit 2b5d00b6 upstream. In preparation for encrypting more than just the kernel during early boot processing, centralize the use of the PMD flag settings based on the type of mapping desired. When 4KB aligned encryption is added, this will allow either PTE flags or large page PMD flags to be used without requiring the caller to adjust. Tested-by:
-
Tom Lendacky authored
commit bacf6b49 upstream. In preparation for follow-on patches, combine the PGD mapping parameters into a struct to reduce the number of function arguments and allow for direct updating of the next pagetable mapping area pointer. Tested-by:
-
Tom Lendacky authored
commit 13038801 upstream. Clean up the use of PUSH and POP and when registers are saved in the __enc_copy() assembly function in order to improve the readability of the code. Move parameter register saving into general purpose registers earlier in the code and move all the pushes to the beginning of the function with corresponding pops at the end. We do this to prepare fixes. Tested-by:
-
Thomas Gleixner authored
commit 45d55e7b upstream. Keith reported the following warning: WARNING: CPU: 28 PID: 1420 at kernel/irq/matrix.c:222 irq_matrix_remove_managed+0x10f/0x120 x86_vector_free_irqs+0xa1/0x180 x86_vector_alloc_irqs+0x1e4/0x3a0 msi_domain_alloc+0x62/0x130 The reason for this is that if the vector allocation fails the error handling code tries to free the failed vector as well, which causes the above imbalance warning to trigger. Adjust the error path to handle this correctly. Fixes: b5dc8e6c ("x86/irq: Use hierarchical irqdomain to manage CPU interrupt vectors") Reported-by:
Keith Busch <keith.busch@intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
-
Joe Lawrence authored
commit d3f14c48 upstream. round_pipe_size() contains a right-bit-shift expression which may overflow, which would cause undefined results in a subsequent roundup_pow_of_two() call. static inline unsigned int round_pipe_size(unsigned int size) { unsigned long nr_pages; nr_pages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT; return roundup_pow_of_two(nr_pages) << PAGE_SHIFT; } PAGE_SIZE is defined as (1UL << PAGE_SHIFT), so: - 4 bytes wide on 32-bit (0 to 0xffffffff) - 8 bytes wide on 64-bit (0 to 0xffffffffffffffff) That means that 32-bit round_pipe_size(), nr_pages may overflow to 0: size=0x00000000 nr_pages=0x0 size=0x00000001 nr_pages=0x1 size=0xfffff000 nr_pages=0xfffff size=0xfffff001 nr_pages=0x0 << ! size=0xffffffff nr_pages=0x0 << ! This is bad because roundup_pow_of_two(n) is undefined when n == 0! 64-bit is not a problem as the unsigned int size is 4 bytes wide (similar to 32-bit) and the larger, 8 byte wide unsigned long, is sufficient to handle the largest value of the bit shift expression: size=0xffffffff nr_pages=100000 Modify round_pipe_size() to return 0 if n == 0 and updates its callers to handle accordingly. Link: http://lkml.kernel.org/r/1507658689-11669-3-git-send-email-joe.lawrence@redhat.comSigned-off-by:
Joe Lawrence <joe.lawrence@redhat.com> Reported-by:
Mikulas Patocka <mpatocka@redhat.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Dong Jinguang <dongjinguang@huawei.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Len Brown authored
commit b5112030 upstream. The INTEL_FAM6_SKYLAKE_X hardcoded crystal_khz value of 25MHZ is problematic: - SKX workstations (with same model # as server variants) use a 24 MHz crystal. This results in a -4.0% time drift rate on SKX workstations. - SKX servers subject the crystal to an EMI reduction circuit that reduces its actual frequency by (approximately) -0.25%. This results in -1 second per 10 minute time drift as compared to network time. This issue can also trigger a timer and power problem, on configurations that use the LAPIC timer (versus the TSC deadline timer). Clock ticks scheduled with the LAPIC timer arrive a few usec before the time they are expected (according to the slow TSC). This causes Linux to poll-idle, when it should be in an idle power saving state. The idle and clock code do not graciously recover from this error, sometimes resulting in significant polling and measurable power impact. Stop using native_calibrate_tsc() for INTEL_FAM6_SKYLAKE_X. native_calibrate_tsc() will return 0, boot will run with tsc_khz = cpu_khz, and the TSC refined calibration will update tsc_khz to correct for the difference. [ tglx: Sanitized change log ] Fixes: 6baf3d61 ("x86/tsc: Add additional Intel CPU models to the crystal quirk list") Signed-off-by:
Len Brown <len.brown@intel.com> Signed-off-by:
-
Len Brown authored
commit da4ae6c4 upstream. If the crystal frequency cannot be determined via CPUID(15).crystal_khz or the built-in table then native_calibrate_tsc() will still set the X86_FEATURE_TSC_KNOWN_FREQ flag which prevents the refined TSC calibration. As a consequence such systems use cpu_khz for the TSC frequency which is incorrect when cpu_khz != tsc_khz resulting in time drift. Return early when the crystal frequency cannot be retrieved without setting the X86_FEATURE_TSC_KNOWN_FREQ flag. This ensures that the refined TSC calibration is invoked. [ tglx: Steam-blastered changelog. Sigh ] Fixes: 4ca4df0b ("x86/tsc: Mark TSC frequency determined by CPUID as known") Signed-off-by:
-
Andi Kleen authored
commit 327867fa upstream. const variables must use __initconst, not __initdata. Fix this up for the IDT tables, which got it consistently wrong. Fixes: 16bc18d8 ("x86/idt: Move 32-bit idt_descr to C code") Signed-off-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
-
Eric W. Biederman authored
commit beacd6f7 upstream. SEGV_PKUERR is a signal specific si_code which happens to have the same numeric value as several others: BUS_MCEERR_AR, ILL_ILLTRP, FPE_FLTOVF, TRAP_HWBKPT, CLD_TRAPPED, POLL_ERR, SEGV_THREAD_ID, as such it is not safe to just test the si_code the signal number must also be tested to prevent a false positive in fill_sig_info_pkey. This error was by inspection, and BUS_MCEERR_AR appears to be a real candidate for confusion. So pass in si_signo and check for SIG_SEGV to verify that it is actually a SEGV_PKUERR Fixes: 019132ff ("x86/mm/pkeys: Fill in pkey field in siginfo") Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Thomas Gleixner authored
commit d4792441 upstream. intel_rdt_iffline_cpu() -> domain_remove_cpu() frees memory first and then proceeds accessing it. BUG: KASAN: use-after-free in find_first_bit+0x1f/0x80 Read of size 8 at addr ffff883ff7c1e780 by task cpuhp/31/195 find_first_bit+0x1f/0x80 has_busy_rmid+0x47/0x70 intel_rdt_offline_cpu+0x4b4/0x510 Freed by task 195: kfree+0x94/0x1a0 intel_rdt_offline_cpu+0x17d/0x510 Do the teardown first and then free memory. Fixes: 24247aee ("x86/intel_rdt/cqm: Improve limbo list processing") Reported-by:
Joseph Salisbury <joseph.salisbury@canonical.com> Signed-off-by:
-
Andi Kleen authored
commit 6cfb521a upstream. Add a marker for retpoline to the module VERMAGIC. This catches the case when a non RETPOLINE compiled module gets loaded into a retpoline kernel, making it insecure. It doesn't handle the case when retpoline has been runtime disabled. Even in this case the match of the retcompile status will be enforced. This implies that even with retpoline run time disabled all modules loaded need to be recompiled. Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> Cc: rusty@rustcorp.com.au Cc: arjan.van.de.ven@intel.com Cc: jeyu@kernel.org Cc: torvalds@linux-foundation.org Link: https://lkml.kernel.org/r/20180116205228.4890-1-andi@firstfloor.orgSigned-off-by:
-
Paolo Bonzini authored
commit 4fdec203 upstream. Processor tracing is already enumerated in word 9 (CPUID[7,0].EBX), so do not duplicate it in the scattered features word. Besides being more tidy, this will be useful for KVM when it presents processor tracing to the guests. KVM selects host features that are supported by both the host kernel (depending on command line options, CPU errata, or whatever) and KVM. Whenever a full feature word exists, KVM's code is written in the expectation that the CPUID bit number matches the X86_FEATURE_* bit number, but this is not the case for X86_FEATURE_INTEL_PT. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luwei Kang <luwei.kang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm@vger.kernel.org Link: http://lkml.kernel.org/r/1516117345-34561-1-git-send-email-pbonzini@redhat.comSigned-off-by:
-
Josh Poimboeuf authored
commit 385d11b1 upstream. If a nonexistent file is supplied to objtool, it complains with a non-helpful error: open: No such file or directory Improve it to: objtool: Can't open 'foo': No such file or directory Reported-by:
Markus <M4rkusXXL@web.de> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/406a3d00a21225eee2819844048e17f68523ccf6.1516025651.git.jpoimboe@redhat.comSigned-off-by:
-
Tom Lendacky authored
commit 28d437d5 upstream. The PAUSE instruction is currently used in the retpoline and RSB filling macros as a speculation trap. The use of PAUSE was originally suggested because it showed a very, very small difference in the amount of cycles/time used to execute the retpoline as compared to LFENCE. On AMD, the PAUSE instruction is not a serializing instruction, so the pause/jmp loop will use excess power as it is speculated over waiting for return to mispredict to the correct target. The RSB filling macro is applicable to AMD, and, if software is unable to verify that LFENCE is serializing on AMD (possible when running under a hypervisor), the generic retpoline support will be used and, so, is also applicable to AMD. Keep the current usage of PAUSE for Intel, but add an LFENCE instruction to the speculation trap for AMD. The same sequence has been adopted by GCC for the GCC generated retpolines. Signed-off-by:
Borislav Petkov <bp@alien8.de> Acked-by:
Arjan van de Ven <arjan@linux.intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Cc: Kees Cook <keescook@google.com> Link: https://lkml.kernel.org/r/20180113232730.31060.36287.stgit@tlendack-t1.amdoffice.netSigned-off-by:
-
David Woodhouse authored
commit c995efd5 upstream. On context switch from a shallow call stack to a deeper one, as the CPU does 'ret' up the deeper side it may encounter RSB entries (predictions for where the 'ret' goes to) which were populated in userspace. This is problematic if neither SMEP nor KPTI (the latter of which marks userspace pages as NX for the kernel) are active, as malicious code in userspace may then be executed speculatively. Overwrite the CPU's return prediction stack with calls which are predicted to return to an infinite loop, to "capture" speculation if this happens. This is required both for retpoline, and also in conjunction with IBRS for !SMEP && !KPTI. On Skylake+ the problem is slightly different, and an *underflow* of the RSB may cause errant branch predictions to occur. So there it's not so much overwrite, as *filling* the RSB to attempt to prevent it getting empty. This is only a partial solution for Skylake+ since there are many other conditions which may result in the RSB becoming empty. The full solution on Skylake+ is to use IBRS, which will prevent the problem even when the RSB becomes empty. With IBRS, the RSB-stuffing will not be required on context switch. [ tglx: Added missing vendor check and slighty massaged comments and changelog ] Signed-off-by:
-
Andrey Ryabinin authored
commit 0d39e266 upstream. Currently KASAN doesn't panic in case it don't have enough memory to boot. Instead, it crashes in some random place: kernel BUG at arch/x86/mm/physaddr.c:27! RIP: 0010:__phys_addr+0x268/0x276 Call Trace: kasan_populate_shadow+0x3f2/0x497 kasan_init+0x12e/0x2b2 setup_arch+0x2825/0x2a2c start_kernel+0xc8/0x15f4 x86_64_start_reservations+0x2a/0x2c x86_64_start_kernel+0x72/0x75 secondary_startup_64+0xa5/0xb0 Use memblock_virt_alloc_try_nid() for allocations without failure fallback. It will panic with an out of memory message. Reported-by:
kernel test robot <xiaolong.ye@intel.com> Signed-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by:
-
Benoît Thébaudeau authored
commit 499ed50f upstream. Commit 5143c953 ("mmc: sdhci-esdhc-imx: Allow all supported prescaler values") made it possible to set SYSCTL.SDCLKFS to 0 in SDR mode, thus bypassing the SD clock frequency prescaler, in order to be able to get higher SD clock frequencies in some contexts. However, that commit missed the fact that this value is illegal on the eSDHCv3 instance of the i.MX53. This seems to be the only exception on i.MX, this value being legal even for the eSDHCv2 instances of the i.MX53. Fix this issue by changing the minimum prescaler value if the i.MX53 eSDHCv3 is detected. According to the i.MX53 reference manual, if DLLCTRL[10] can be set, then the controller is eSDHCv3, else it is eSDHCv2. This commit fixes the following issue, which was preventing the i.MX53 Loco (IMX53QSB) board from booting Linux 4.15.0-rc5: [ 1.882668] mmcblk1: error -84 transferring data, sector 2048, nr 8, cmd response 0x900, card status 0xc00 [ 2.002255] mmcblk1: error -84 transferring data, sector 2050, nr 6, cmd response 0x900, card status 0xc00 [ 12.645056] mmc1: Timeout waiting for hardware interrupt. [ 12.650473] mmc1: sdhci: ============ SDHCI REGISTER DUMP =========== [ 12.656921] mmc1: sdhci: Sys addr: 0x00000000 | Version: 0x00001201 [ 12.663366] mmc1: sdhci: Blk size: 0x00000004 | Blk cnt: 0x00000000 [ 12.669813] mmc1: sdhci: Argument: 0x00000000 | Trn mode: 0x00000013 [ 12.676258] mmc1: sdhci: Present: 0x01f8028f | Host ctl: 0x00000013 [ 12.682703] mmc1: sdhci: Power: 0x00000002 | Blk gap: 0x00000000 [ 12.689148] mmc1: sdhci: Wake-up: 0x00000000 | Clock: 0x0000003f [ 12.695594] mmc1: sdhci: Timeout: 0x0000008e | Int stat: 0x00000000 [ 12.702039] mmc1: sdhci: Int enab: 0x107f004b | Sig enab: 0x107f004b [ 12.708485] mmc1: sdhci: AC12 err: 0x00000000 | Slot int: 0x00001201 [ 12.714930] mmc1: sdhci: Caps: 0x07eb0000 | Caps_1: 0x08100810 [ 12.721375] mmc1: sdhci: Cmd: 0x0000163a | Max curr: 0x00000000 [ 12.727821] mmc1: sdhci: Resp[0]: 0x00000920 | Resp[1]: 0x00000000 [ 12.734265] mmc1: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000 [ 12.740709] mmc1: sdhci: Host ctl2: 0x00000000 [ 12.745157] mmc1: sdhci: ADMA Err: 0x00000001 | ADMA Ptr: 0xc8049200 [ 12.751601] mmc1: sdhci: ============================================ [ 12.758110] print_req_error: I/O error, dev mmcblk1, sector 2050 [ 12.764135] Buffer I/O error on dev mmcblk1p1, logical block 0, lost sync page write [ 12.775163] EXT4-fs (mmcblk1p1): mounted filesystem without journal. Opts: (null) [ 12.782746] VFS: Mounted root (ext4 filesystem) on device 179:9. [ 12.789151] mmcblk1: response CRC error sending SET_BLOCK_COUNT command, card status 0x900 Signed-off-by:
Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com> Reported-by:
Wladimir J. van der Laan <laanwj@gmail.com> Tested-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Josh Poimboeuf authored
commit 2a0098d7 upstream. Objtool segfaults when the gold linker is used with CONFIG_MODVERSIONS=y and CONFIG_UNWINDER_ORC=y. With CONFIG_MODVERSIONS=y, the .o file gets passed to the linker before being passed to objtool. The gold linker seems to strip unused ELF symbols by default, which confuses objtool and causes the seg fault when it's trying to generate ORC metadata. Objtool should really be running immediately after GCC anyway, without a linker call in between. Change the makefile ordering so that objtool is called before the linker. Reported-and-tested-by:
-
Josh Snyder authored
commit c96f5471 upstream. Before commit: e33a9bba ("sched/core: move IO scheduling accounting from io_schedule_timeout() into scheduler") delayacct_blkio_end() was called after context-switching into the task which completed I/O. This resulted in double counting: the task would account a delay both waiting for I/O and for time spent in the runqueue. With e33a9bba, delayacct_blkio_end() is called by try_to_wake_up(). In ttwu, we have not yet context-switched. This is more correct, in that the delay accounting ends when the I/O is complete. But delayacct_blkio_end() relies on 'get_current()', and we have not yet context-switched into the task whose I/O completed. This results in the wrong task having its delay accounting statistics updated. Instead of doing that, pass the task_struct being woken to delayacct_blkio_end(), so that it can update the statistics of the correct task. Signed-off-by:
Josh Snyder <joshs@netflix.com> Acked-by:
Tejun Heo <tj@kernel.org> Acked-by:
Balbir Singh <bsingharora@gmail.com> Cc: Brendan Gregg <bgregg@netflix.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-block@vger.kernel.org Fixes: e33a9bba ("sched/core: move IO scheduling accounting from io_schedule_timeout() into scheduler") Link: http://lkml.kernel.org/r/1513613712-571-1-git-send-email-joshs@netflix.comSigned-off-by:
-
Sagi Grimberg authored
commit cd52cb26 upstream. In case we fail to establish the connection we must drain our pre-posted login recieve work request before continuing safely with connection teardown. Fixes: a060b562 ("IB/core: generic RDMA READ/WRITE API") Reported-by:
Amrani, Ram <Ram.Amrani@cavium.com> Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Eric Biggers authored
commit 4e765b49 upstream. If a message sent to a PF_KEY socket ended with an incomplete extension header (fewer than 4 bytes remaining), then parse_exthdrs() read past the end of the message, into uninitialized memory. Fix it by returning -EINVAL in this case. Reproducer: #include <linux/pfkeyv2.h> #include <sys/socket.h> #include <unistd.h> int main() { int sock = socket(PF_KEY, SOCK_RAW, PF_KEY_V2); char buf[17] = { 0 }; struct sadb_msg *msg = (void *)buf; msg->sadb_msg_version = PF_KEY_V2; msg->sadb_msg_type = SADB_DELETE; msg->sadb_msg_len = 2; write(sock, buf, 17); } Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Eric Biggers authored
commit 06b335cb upstream. If a message sent to a PF_KEY socket ended with one of the extensions that takes a 'struct sadb_address' but there were not enough bytes remaining in the message for the ->sa_family member of the 'struct sockaddr' which is supposed to follow, then verify_address_len() read past the end of the message, into uninitialized memory. Fix it by returning -EINVAL in this case. This bug was found using syzkaller with KMSAN. Reproducer: #include <linux/pfkeyv2.h> #include <sys/socket.h> #include <unistd.h> int main() { int sock = socket(PF_KEY, SOCK_RAW, PF_KEY_V2); char buf[24] = { 0 }; struct sadb_msg *msg = (void *)buf; struct sadb_address *addr = (void *)(msg + 1); msg->sadb_msg_version = PF_KEY_V2; msg->sadb_msg_type = SADB_DELETE; msg->sadb_msg_len = 3; addr->sadb_address_len = 1; addr->sadb_address_exttype = SADB_EXT_ADDRESS_SRC; write(sock, buf, 24); } Reported-by:
Alexander Potapenko <glider@google.com> Signed-off-by:
-
Thomas Gleixner authored
commit ed4bbf79 upstream. When the timer base is checked for expired timers then the deferrable base must be checked as well. This was missed when making the deferrable base independent of base::nohz_active. Fixes: ced6d5c1 ("timers: Use deferrable base independent of base::nohz_active") Signed-off-by:
-
Leon Romanovsky authored
commit ae59c3f0 upstream. The rdma_ah_find_type() accesses the port array based on an index controlled by userspace. The existing bounds check is after the first use of the index, so userspace can generate an out of bounds access, as shown by the KASN report below. ================================================================== BUG: KASAN: slab-out-of-bounds in to_rdma_ah_attr+0xa8/0x3b0 Read of size 4 at addr ffff880019ae2268 by task ibv_rc_pingpong/409 CPU: 0 PID: 409 Comm: ibv_rc_pingpong Not tainted 4.15.0-rc2-00031-gb60a3faf5b83-dirty #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 Call Trace: dump_stack+0xe9/0x18f print_address_description+0xa2/0x350 kasan_report+0x3a5/0x400 to_rdma_ah_attr+0xa8/0x3b0 mlx5_ib_query_qp+0xd35/0x1330 ib_query_qp+0x8a/0xb0 ib_uverbs_query_qp+0x237/0x7f0 ib_uverbs_write+0x617/0xd80 __vfs_write+0xf7/0x500 vfs_write+0x149/0x310 SyS_write+0xca/0x190 entry_SYSCALL_64_fastpath+0x18/0x85 RIP: 0033:0x7fe9c7a275a0 RSP: 002b:00007ffee5498738 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007fe9c7ce4b00 RCX: 00007fe9c7a275a0 RDX: 0000000000000018 RSI: 00007ffee5498800 RDI: 0000000000000003 RBP: 000055d0c8d3f010 R08: 00007ffee5498800 R09: 0000000000000018 R10: 00000000000000ba R11: 0000000000000246 R12: 0000000000008000 R13: 0000000000004fb0 R14: 000055d0c8d3f050 R15: 00007ffee5498560 Allocated by task 1: __kmalloc+0x3f9/0x430 alloc_mad_private+0x25/0x50 ib_mad_post_receive_mads+0x204/0xa60 ib_mad_init_device+0xa59/0x1020 ib_register_device+0x83a/0xbc0 mlx5_ib_add+0x50e/0x5c0 mlx5_add_device+0x142/0x410 mlx5_register_interface+0x18f/0x210 mlx5_ib_init+0x56/0x63 do_one_initcall+0x15b/0x270 kernel_init_freeable+0x2d8/0x3d0 kernel_init+0x14/0x190 ret_from_fork+0x24/0x30 Freed by task 0: (stack is not available) The buggy address belongs to the object at ffff880019ae2000 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 104 bytes to the right of 512-byte region [ffff880019ae2000, ffff880019ae2200) The buggy address belongs to the page: page:000000005d674e18 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0 flags: 0x4000000000008100(slab|head) raw: 4000000000008100 0000000000000000 0000000000000000 00000001000c000c raw: dead000000000100 dead000000000200 ffff88001a402000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff880019ae2100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff880019ae2180: 00 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc >ffff880019ae2200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff880019ae2280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff880019ae2300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== Disabling lock debugging due to kernel taint Fixes: 44c58487 ("IB/core: Define 'ib' and 'roce' rdma_ah_attr types") Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
