- 21 Jul, 2017 4 commits
-
-
Gal Pressman authored
[ Upstream commit 8ff93de7 ] Symbol error during carrier counter from PPCNT was mistakenly reported as TX carrier errors in get_stats ndo, although it's an RX counter. Fixes: 269e6b3a ("net/mlx5e: Report additional error statistics in get stats ndo") Signed-off-by:
Gal Pressman <galp@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mohamad Haj Yahia authored
[ Upstream commit 2a0165a0 ] Draining the health workqueue will ignore future health works including the one that report hardware failure and thus we can't enter error state Instead cancel the recovery flow and make sure only recovery flow won't be scheduled. Fixes: 5e44fca5 ('net/mlx5: Only cancel recovery work when cleaning up device') Signed-off-by:
Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by:
Moshe Shemesh <moshe@mellanox.com> Signed-off-by:
-
Gal Pressman authored
[ Upstream commit 8ce59b16 ] When wait for firmware init fails, previous code would mistakenly return success and cause inconsistency in the driver state. Fixes: 6c780a02 ("net/mlx5: Wait for FW readiness before initializing command interface") Signed-off-by:
-
Gleb Fotengauer-Malinovskiy authored
commit f7a320ff upstream. This problem was found by strace ioctl list generator. Fixes: 15c6098c ("staging: android: ion: Remove ion_handle and ion_client") Signed-off-by:
Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org> Acked-by:
Laura Abbott <labbott@redhat.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Signed-off-by:
-
- 15 Jul, 2017 11 commits
-
-
Greg Kroah-Hartman authored
-
Mikulas Patocka authored
commit 99c13b8c upstream. The pat_enabled() logic is broken on CPUs which do not support PAT and where the initialization code fails to call pat_init(). Due to that the enabled flag stays true and pat_enabled() returns true wrongfully. As a consequence the mappings, e.g. for Xorg, are set up with the wrong caching mode and the required MTRR setups are omitted. To cure this the following changes are required: 1) Make pat_enabled() return true only if PAT initialization was invoked and successful. 2) Invoke init_cache_modes() unconditionally in setup_arch() and remove the extra callsites in pat_disable() and the pat disabled code path in pat_init(). Also rename __pat_enabled to pat_disabled to reflect the real purpose of this variable. Fixes: 9cd25aac ("x86/mm/pat: Emulate PAT when it is disabled") Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Bernhard Held <berny156@gmx.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: "Luis R. Rodriguez" <mcgrof@suse.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/alpine.LRH.2.02.1707041749300.3456@file01.intranet.prod.int.rdu2.redhat.comSigned-off-by:
-
Chao Yu authored
commit 1ea1516f upstream. kstrtoull returns 0 on success, however, in reserved_clusters_store we will return -EINVAL if kstrtoull returns 0, it makes us fail to update reserved_clusters value through sysfs. Fixes: 76d33bcaSigned-off-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Miao Xie <miaoxie@huawei.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Jason A. Donenfeld authored
commit fec17cb2 upstream. Otherwise, we enable all sorts of forgeries via timing attack. Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Suggested-by:
Stephan Müller <smueller@chronox.de> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: linux-crypto@vger.kernel.org Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Horia Geantă authored
commit 42cfcafb upstream. Changes in the SW cts (ciphertext stealing) code in commit 0605c41c ("crypto: cts - Convert to skcipher") revealed a problem in the CAAM driver: when cts(cbc(aes)) is executed and cts runs in SW, cbc(aes) is offloaded in CAAM; cts encrypts the last block in atomic context and CAAM incorrectly decides to use GFP_KERNEL for memory allocation. Fix this by allowing GFP_KERNEL (sleeping) only when MAY_SLEEP flag is set, i.e. remove MAY_BACKLOG flag. We split the fix in two parts - first is sent to -stable, while the second is not (since there is no known failure case). Link: http://lkml.kernel.org/g/20170602122446.2427-1-david@sigma-star.atReported-by:
David Gstir <david@sigma-star.at> Signed-off-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
-
Ian Abbott authored
commit a9332e9a upstream. There is a clean-up bug in the core comedi module initialization functions, `comedi_init()`. If the `comedi_num_legacy_minors` module parameter is non-zero (and valid), it creates that many "legacy" devices and registers them in SysFS. A failure causes the function to clean up and return an error. Unfortunately, it fails to destroy the "comedi" class that was created earlier. Fix it by adding a call to `class_destroy(comedi_class)` at the appropriate place in the clean-up sequence. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Malcolm Priestley authored
commit dc32190f upstream. The key table is not intialized correctly without this call. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Kirill Tkhai authored
commit a0c4acd2 upstream. If a writer could been woken up, the above branch if (sem->count == 0) break; would have moved us to taking the sem. So, it's not the time to wake a writer now, and only readers are allowed now. Thus, 0 must be passed to __rwsem_do_wake(). Next, __rwsem_do_wake() wakes readers unconditionally. But we mustn't do that if the sem is owned by writer in the moment. Otherwise, writer and reader own the sem the same time, which leads to memory corruption in callers. rwsem-xadd.c does not need that, as: 1) the similar check is made lockless there, 2) in __rwsem_mark_wake::try_reader_grant we test, that sem is not owned by writer. Signed-off-by:
Kirill Tkhai <ktkhai@virtuozzo.com> Acked-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Niklas Cassel <niklas.cassel@axis.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 17fcbd59 "locking/rwsem: Fix down_write_killable() for CONFIG_RWSEM_GENERIC_SPINLOCK=y" Link: http://lkml.kernel.org/r/149762063282.19811.9129615532201147826.stgit@localhost.localdomainSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Eric W. Biederman authored
commit 2fd1d2c4 upstream. Andrei Vagin writes: FYI: This bug has been reproduced on 4.11.7 > BUG: Dentry ffff895a3dd01240{i=4e7c09a,n=lo} still in use (1) [unmount of proc proc] > ------------[ cut here ]------------ > WARNING: CPU: 1 PID: 13588 at fs/dcache.c:1445 umount_check+0x6e/0x80 > CPU: 1 PID: 13588 Comm: kworker/1:1 Not tainted 4.11.7-200.fc25.x86_64 #1 > Hardware name: CompuLab sbc-flt1/fitlet, BIOS SBCFLT_0.08.04 06/27/2015 > Workqueue: events proc_cleanup_work > Call Trace: > dump_stack+0x63/0x86 > __warn+0xcb/0xf0 > warn_slowpath_null+0x1d/0x20 > umount_check+0x6e/0x80 > d_walk+0xc6/0x270 > ? dentry_free+0x80/0x80 > do_one_tree+0x26/0x40 > shrink_dcache_for_umount+0x2d/0x90 > generic_shutdown_super+0x1f/0xf0 > kill_anon_super+0x12/0x20 > proc_kill_sb+0x40/0x50 > deactivate_locked_super+0x43/0x70 > deactivate_super+0x5a/0x60 > cleanup_mnt+0x3f/0x90 > mntput_no_expire+0x13b/0x190 > kern_unmount+0x3e/0x50 > pid_ns_release_proc+0x15/0x20 > proc_cleanup_work+0x15/0x20 > process_one_work+0x197/0x450 > worker_thread+0x4e/0x4a0 > kthread+0x109/0x140 > ? process_one_work+0x450/0x450 > ? kthread_park+0x90/0x90 > ret_from_fork+0x2c/0x40 > ---[ end trace e1c109611e5d0b41 ]--- > VFS: Busy inodes after unmount of proc. Self-destruct in 5 seconds. Have a nice day... > BUG: unable to handle kernel NULL pointer dereference at (null) > IP: _raw_spin_lock+0xc/0x30 > PGD 0 Fix this by taking a reference to the super block in proc_sys_prune_dcache. The superblock reference is the core of the fix however the sysctl_inodes list is converted to a hlist so that hlist_del_init_rcu may be used. This allows proc_sys_prune_dache to remove inodes the sysctl_inodes list, while not causing problems for proc_sys_evict_inode when if it later choses to remove the inode from the sysctl_inodes list. Removing inodes from the sysctl_inodes list allows proc_sys_prune_dcache to have a progress guarantee, while still being able to drop all locks. The fact that head->unregistering is set in start_unregistering ensures that no more inodes will be added to the the sysctl_inodes list. Previously the code did a dance where it delayed calling iput until the next entry in the list was being considered to ensure the inode remained on the sysctl_inodes list until the next entry was walked to. The structure of the loop in this patch does not need that so is much easier to understand and maintain. Reported-by:
Andrei Vagin <avagin@gmail.com> Tested-by:
Andrei Vagin <avagin@openvz.org> Fixes: ace0c791 ("proc/sysctl: Don't grab i_lock under sysctl_lock.") Fixes: d6cffbbe ("proc/sysctl: prune stale dentries during unregistering") Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Peter Senna Tschudin authored
commit 4dec2f11 upstream. 18a42088 introduced a change to reduce the RX DMA latency on the first reception when the serial port was opened for reading. However it was claiming a hardirq unsafe lock after a hardirq safe lock which is not allowed and causes lockdep to complain verbosely. This patch changes the code to always start RX DMA earlier, instead of relying on the flags used to open the serial port removing the code that was looking for the serial file flags. Signed-off-by:
Peter Senna Tschudin <peter.senna@collabora.com> Tested-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
Fabio Estevam <festevam@gmail.com> Signed-off-by:
-
Cong Wang authored
commit f991af3d upstream. The retry logic for netlink_attachskb() inside sys_mq_notify() is nasty and vulnerable: 1) The sock refcnt is already released when retry is needed 2) The fd is controllable by user-space because we already release the file refcnt so we when retry but the fd has been just closed by user-space during this small window, we end up calling netlink_detachskb() on the error path which releases the sock again, later when the user-space closes this socket a use-after-free could be triggered. Setting 'sock' to NULL here should be sufficient to fix it. Reported-by:
GeneBlue <geneblue.mail@gmail.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
- 12 Jul, 2017 25 commits
-
-
Greg Kroah-Hartman authored
-
Stephan Mueller authored
commit b61929c6 upstream. Initialise ctr_completion variable before use. Cc: <stable@vger.kernel.org> Signed-off-by:
Harsh Jain <harshjain.prof@gmail.com> Signed-off-by:
-
Juergen Gross authored
commit 1a3fc2c4 upstream. There has been a report about a deadlock in the xenbus driver: [ 247.979498] ====================================================== [ 247.985688] WARNING: possible circular locking dependency detected [ 247.991882] 4.12.0-rc4-00022-gc4b25c0 #575 Not tainted [ 247.997040] ------------------------------------------------------ [ 248.003232] xenbus/91 is trying to acquire lock: [ 248.007875] (&u->msgbuffer_mutex){+.+.+.}, at: [<ffff00000863e904>] xenbus_dev_queue_reply+0x3c/0x230 [ 248.017163] [ 248.017163] but task is already holding lock: [ 248.023096] (xb_write_mutex){+.+...}, at: [<ffff00000863a940>] xenbus_thread+0x5f0/0x798 [ 248.031267] [ 248.031267] which lock already depends on the new lock. [ 248.031267] [ 248.039615] [ 248.039615] the existing dependency chain (in reverse order) is: [ 248.047176] [ 248.047176] -> #1 (xb_write_mutex){+.+...}: [ 248.052943] __lock_acquire+0x1728/0x1778 [ 248.057498] lock_acquire+0xc4/0x288 [ 248.061630] __mutex_lock+0x84/0x868 [ 248.065755] mutex_lock_nested+0x3c/0x50 [ 248.070227] xs_send+0x164/0x1f8 [ 248.074015] xenbus_dev_request_and_reply+0x6c/0x88 [ 248.079427] xenbus_file_write+0x260/0x420 [ 248.084073] __vfs_write+0x48/0x138 [ 248.088113] vfs_write+0xa8/0x1b8 [ 248.091983] SyS_write+0x54/0xb0 [ 248.095768] el0_svc_naked+0x24/0x28 [ 248.099897] [ 248.099897] -> #0 (&u->msgbuffer_mutex){+.+.+.}: [ 248.106088] print_circular_bug+0x80/0x2e0 [ 248.110730] __lock_acquire+0x1768/0x1778 [ 248.115288] lock_acquire+0xc4/0x288 [ 248.119417] __mutex_lock+0x84/0x868 [ 248.123545] mutex_lock_nested+0x3c/0x50 [ 248.128016] xenbus_dev_queue_reply+0x3c/0x230 [ 248.133005] xenbus_thread+0x788/0x798 [ 248.137306] kthread+0x110/0x140 [ 248.141087] ret_from_fork+0x10/0x40 It is rather easy to avoid by dropping xb_write_mutex before calling xenbus_dev_queue_reply(). Fixes: fd8aa909 ("xen: optimize xenbus driver for multiple concurrent xenstore accesses"). Reported-by:
Andre Przywara <andre.przywara@arm.com> Signed-off-by:
Juergen Gross <jgross@suse.com> Tested-by:
-
Thomas Gleixner authored
commit ff801b71 upstream. Stephen reported the following build warning in UP: kernel/sched/fair.c:2657:9: warning: 'struct sched_domain' declared inside parameter list ^ /home/sfr/next/next/kernel/sched/fair.c:2657:9: warning: its scope is only this definition or declaration, which is probably not what you want Hide the numa_wake_affine() inline stub on UP builds to get rid of it. Fixes: 3fed382b ("sched/numa: Implement NUMA node level wake_affine()") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Mel Gorman <mgorman@techsingularity.net> Signed-off-by:
-
Rik van Riel authored
commit 815abf5a upstream. The effective_load() function was only used by the NUMA balancing code, and not by the regular load balancing code. Now that the NUMA balancing code no longer uses it either, get rid of it. Signed-off-by:
Rik van Riel <riel@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: jhladky@redhat.com Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/20170623165530.22514-5-riel@redhat.comSigned-off-by:
-
Rik van Riel authored
commit 3fed382b upstream. Since select_idle_sibling() can place a task anywhere on a socket, comparing loads between individual CPU cores makes no real sense for deciding whether to do an affine wakeup across sockets, either. Instead, compare the load between the sockets in a similar way the load balancer and the numa balancing code do. Signed-off-by:
-
Rik van Riel authored
commit 7d894e6e upstream. Then 'this_cpu' and 'prev_cpu' are in the same socket, select_idle_sibling() will do its thing regardless of the return value of wake_affine(). Just return true and don't look at all the other things. Signed-off-by:
-
Rik van Riel authored
commit 739294fb upstream. Several tests in the NAS benchmark seem to run a lot slower with NUMA balancing enabled, than with NUMA balancing disabled. The slower run time corresponds with increased idle time. Overriding the final test of migrate_degrades_locality (but still doing the other NUMA tests first) seems to improve performance of those benchmarks. Reported-by:
Jirka Hladky <jhladky@redhat.com> Signed-off-by:
-
Vlastimil Babka authored
commit 8655d549 upstream. A customer has reported a soft-lockup when running an intensive memory stress test, where the trace on multiple CPU's looks like this: RIP: 0010:[<ffffffff810c53fe>] [<ffffffff810c53fe>] native_queued_spin_lock_slowpath+0x10e/0x190 ... Call Trace: [<ffffffff81182d07>] queued_spin_lock_slowpath+0x7/0xa [<ffffffff811bc331>] change_protection_range+0x3b1/0x930 [<ffffffff811d4be8>] change_prot_numa+0x18/0x30 [<ffffffff810adefe>] task_numa_work+0x1fe/0x310 [<ffffffff81098322>] task_work_run+0x72/0x90 Further investigation showed that the lock contention here is pmd_lock(). The task_numa_work() function makes sure that only one thread is let to perform the work in a single scan period (via cmpxchg), but if there's a thread with mmap_sem locked for writing for several periods, multiple threads in task_numa_work() can build up a convoy waiting for mmap_sem for read and then all get unblocked at once. This patch changes the down_read() to the trylock version, which prevents the build up. For a workload experiencing mmap_sem contention, it's probably better to postpone the NUMA balancing work anyway. This seems to have fixed the soft lockups involving pmd_lock(), which is in line with the convoy theory. Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by:
-
Peter Zijlstra authored
commit 1ad3aaf3 upstream. Hackbench recently suffered a bunch of pain, first by commit: 4c77b18c ("sched/fair: Make select_idle_cpu() more aggressive") and then by commit: c743f0a5 ("sched/fair, cpumask: Export for_each_cpu_wrap()") which fixed a bug in the initial for_each_cpu_wrap() implementation that made select_idle_cpu() even more expensive. The bug was that it would skip over CPUs when bits were consequtive in the bitmask. This however gave me an idea to fix select_idle_cpu(); where the old scheme was a cliff-edge throttle on idle scanning, this introduces a more gradual approach. Instead of stopping to scan entirely, we limit how many CPUs we scan. Initial benchmarks show that it mostly recovers hackbench while not hurting anything else, except Mason's schbench, but not as bad as the old thing. It also appears to recover the tbench high-end, which also suffered like hackbench. Tested-by:
Matt Fleming <matt@codeblueprint.co.uk> Signed-off-by:
-
Peter Zijlstra authored
commit c743f0a5 upstream. More users for for_each_cpu_wrap() have appeared. Promote the construct to generic cpumask interface. The implementation is slightly modified to reduce arguments. Signed-off-by:
-
Paolo Abeni authored
commit 236222d3 upstream. According to the Intel datasheet, the REP MOVSB instruction exposes a pretty heavy setup cost (50 ticks), which hurts short string copy operations. This change tries to avoid this cost by calling the explicit loop available in the unrolled code for strings shorter than 64 bytes. The 64 bytes cutoff value is arbitrary from the code logic point of view - it has been selected based on measurements, as the largest value that still ensures a measurable gain. Micro benchmarks of the __copy_from_user() function with lengths in the [0-63] range show this performance gain (shorter the string, larger the gain): - in the [55%-4%] range on Intel Xeon(R) CPU E5-2690 v4 - in the [72%-9%] range on Intel Core i7-4810MQ Other tested CPUs - namely Intel Atom S1260 and AMD Opteron 8216 - show no difference, because they do not expose the ERMS feature bit. Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
-
Nicholas Piggin authored
commit 67d20418 upstream. Fixes: a7cd88da ("powerpc/powernv: Move CPU-Offline idle state invocation from smp.c to idle.c") Cc: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Acked-by:
Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Jarkko Sakkinen authored
commit 13b47cfc upstream. While cleaning up sysfs callback that prints EK we discovered a kernel memory leak. This commit fixes the issue by zeroing the buffer used for TPM command/response. The leak happen when we use either tpm_vtpm_proxy, tpm_ibmvtpm or xen-tpmfront. Fixes: 08837438 ("TPM: sysfs functions consolidation") Reported-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by:
Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by:
James Morris <james.l.morris@oracle.com> Signed-off-by:
-
Josh Zimmerman authored
commit d1bd4a79 upstream. If a TPM2 loses power without a TPM2_Shutdown command being issued (a "disorderly reboot"), it may lose some state that has yet to be persisted to NVRam, and will increment the DA counter. After the DA counter gets sufficiently large, the TPM will lock the user out. NOTE: This only changes behavior on TPM2 devices. Since TPM1 uses sysfs, and sysfs relies on implicit locking on chip->ops, it is not safe to allow this code to run in TPM1, or to add sysfs support to TPM2, until that locking is made explicit. Signed-off-by:
Josh Zimmerman <joshz@google.com> Fixes: 74d6b3ce ("tpm: fix suspend/resume paths for TPM 2.0") Reviewed-by:
-
Josh Zimmerman authored
commit f77af151 upstream. The TPM class has some common shutdown code that must be executed for all drivers. This adds some needed functionality for that. Signed-off-by:
-
Andreas Gruenbacher authored
commit 961ae1d8 upstream. Before commit 88ffbf3e "GFS2: Use resizable hash table for glocks", glocks were freed via call_rcu to allow reading the glock hashtable locklessly using rcu. This was then changed to free glocks immediately, which made reading the glock hashtable unsafe. Bring back the original code for freeing glocks via call_rcu. Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by:
Bob Peterson <rpeterso@redhat.com> Signed-off-by:
-
Jiahau Chang authored
commit dec08194 upstream. For AMD Promontory xHCI host, although you can disable USB 2.0 ports in BIOS settings, those ports will be enabled anyway after you remove a device on that port and re-plug it in again. It's a known limitation of the chip. As a workaround we can clear the PORT_WAKE_BITS. This will disable wake on connect, disconnect and overcurrent on AMD Promontory USB2 ports [checkpatch cleanup and commit message reword -Mathias] Cc: Tsai Nicholas <nicholas.tsai@amd.com> Signed-off-by:
Jiahau Chang <Lars_Chang@asmedia.com.tw> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Bjørn Mork authored
commit 996fab55 upstream. A new Sierra Wireless EM7305 device ID used in a Toshiba laptop. Reported-by:
Petr Kloc <petr_kloc@yahoo.com> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Johan Hovold authored
commit 8fb060da upstream. Add two Longcheer device-id entries which specifically enables a Telewell TW-3G HSPA+ branded modem (0x9801). Reported-by:
Teemu Likonen <tlikonen@iki.fi> Reported-by:
Lars Melin <larsm17@gmail.com> Tested-by:
-
Johan Hovold authored
commit e271b2c9 upstream. Make sure to release any OF device-node reference taken when creating the USB device. Note that we currently do not hold a reference to the root hub device-tree node (i.e. the parent controller node). Fixes: 69bec725 ("USB: core: let USB device know device node") Acked-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
commit 7cf916bd upstream. The current definition is wrong. This breaks my upcoming Aspeed virtual hub driver. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Devin Heitmueller authored
commit 6836796d upstream. The USB core and sysfs will attempt to enumerate certain parameters which are unsupported by the au0828 - causing inconsistent behavior and sometimes causing the chip to reset. Avoid making these calls. This problem manifested as intermittent cases where the au8522 would be reset on analog video startup, in particular when starting up ALSA audio streaming in parallel - the sysfs entries created by snd-usb-audio on streaming startup would result in unsupported control messages being sent during tuning which would put the chip into an unknown state. Signed-off-by:
Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
-
Michael Grzeschik authored
commit b3b51417 upstream. The usbip stack dynamically allocates the transfer_buffer and setup_packet of each urb that got generated by the tcp to usb stub code. As these pointers are always used only once we will set them to NULL after use. This is done likewise to the free_urb code in vudc_dev.c. This patch fixes double kfree situations where the usbip remote side added the URB_FREE_BUFFER. Signed-off-by:
Michael Grzeschik <m.grzeschik@pengutronix.de> Acked-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
-
Jeremie Rapin authored
commit fd90f73a upstream. Added the USB serial device ID for the CEL ZigBee EM3588 radio stick. Signed-off-by:
Jeremie Rapin <rapinj@gmail.com> Acked-by:
-
