We would prefer not to have any overlap between the two drivers.
Remove the cciss_allow_hpsa option, as it it is no longer needed.
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

This is to conserve memory in a memory-limited kdump scenario
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

and use the doorbell reset method if available (which doesn't
lock up the controller if you properly save and restore all
the PCI registers that you're supposed to.)
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

After a reset, we should first wait for the board to become "not ready",
and then wait for it to become "ready", instead of immediately
waiting for it to become "ready", and do this waiting *after*
restoring PCI config space registers.
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (47 commits)
  Blackfin: bfin_spi.h: add MMR peripheral layout
  Blackfin: bfin_ppi.h: start a common PPI/EPPI header
  Blackfin: bfin_can.h: add missing VERSION/VERSION2 MMRs
  Blackfin: bf538: add missing SIC_RVECT define
  Blackfin: bf561: rewrite SICA_xxx to just SIC_xxx
  Blackfin: bf54x: add missing SIC_RVECT definition
  Blackfin: H8606: move 8250 irqflags to platform resources
  Blackfin: glue XIP/ROM kernel kconfigs
  Blackfin: update sparse flags for latest upstream changes
  Blackfin: coreb: update ioctl numbers
  Blackfin: coreb: add gpl module license
  Blackfin: bf518-ezkit: add ssm2603 codec resources
  Blackfin: bf51x/bf52x: fix 16/32bit SPORT MMR helpers
  Blackfin: tll6527m: new board port
  Blackfin: bf526-ezbrd/bf527-ezkit: add NAND partition for u-boot
  Blackfin: merge kernel init memory back into main memory region
  Blackfin: gpio: add peripheral group check
  Blackfin: dma: bf54x: add missing break for SPORT1 TX IRQ
  Blackfin: add new cacheflush syscall
  Blackfin: bf548-ezkit: increase u-boot partition size
  ...

Merge branch 'x86-trampoline-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-trampoline-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86-32, mm: Add an initial page table for core bootstrapping

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  kdb,debug_core: adjust master cpu switch logic against new debug_core locking
  debug_core: refactor locking for master/slave cpus
  x86,kgdb: remove unnecessary call to kgdb_correct_hw_break()
  debug_core: disable hw_breakpoints on all cores in kgdb_cpu_enter()
  kdb,kgdb: fix sparse fixups
  kdb: Fix oops in kdb_unregister
  kdb,ftdump: Remove reference to internal kdb include
  kdb: Allow kernel loadable modules to add kdb shell functions
  debug_core: stop rcu warnings on kernel resume
  debug_core: move all watch dog syncs to a single function
  x86,kgdb: fix debugger hw breakpoint test regression in 2.6.35

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (141 commits)
  USB: mct_u232: fix broken close
  USB: gadget: amd5536udc.c: fix error path
  USB: imx21-hcd - fix off by one resource size calculation
  usb: gadget: fix Kconfig warning
  usb: r8a66597-udc: Add processing when USB was removed.
  mxc_udc: add workaround for ENGcm09152 for i.MX35
  USB: ftdi_sio: add device ids for ScienceScope
  USB: musb: AM35x: Workaround for fifo read issue
  USB: musb: add musb support for AM35x
  USB: AM35x: Add musb support
  usb: Fix linker errors with CONFIG_PM=n
  USB: ohci-sh - use resource_size instead of defining its own resource_len macro
  USB: isp1362-hcd - use resource_size instead of defining its own resource_len macro
  USB: isp116x-hcd - use resource_size instead of defining its own resource_len macro
  USB: xhci: Fix compile error when CONFIG_PM=n
  USB: accept some invalid ep0-maxpacket values
  USB: xHCI: PCI power management implementation
  USB: xHCI: bus power management implementation
  USB: xHCI: port remote wakeup implementation
  USB: xHCI: port power management implementation
  ...

Manually fix up (non-data) conflict: the SCSI merge gad renamed the
'hw_sector_size' member to 'physical_block_size', and the USB tree
brought a new use of it.

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (49 commits)
  serial8250: ratelimit "too much work" error
  serial: bfin_sport_uart: speed up sport RX sample rate to be 3% faster
  serial: abstraction for 8250 legacy ports
  serial/imx: check that the buffer is non-empty before sending it out
  serial: mfd: add more baud rates support
  jsm: Remove the uart port on errors
  Alchemy: Add UART PM methods.
  8250: allow platforms to override PM hook.
  altera_uart: Don't use plain integer as NULL pointer
  altera_uart: Fix missing prototype for registering an early console
  altera_uart: Fixup type usage of port flags
  altera_uart: Make it possible to use Altera UART and 8250 ports together
  altera_uart: Add support for different address strides
  altera_uart: Add support for getting mapbase and IRQ from resources
  altera_uart: Add support for polling mode (IRQ-less)
  serial: Factor out uart_poll_timeout() from 8250 driver
  serial: mark the 8250 driver as maintained
  serial: 8250: Don't delay after transmitter is ready.
  tty: MAINTAINERS: add drivers/serial/jsm/ as maintained driver
  vcs: invoke the vt update callback when /dev/vcs* is written to
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (31 commits)
  driver core: Display error codes when class suspend fails
  Driver core: Add section count to memory_block struct
  Driver core: Add mutex for adding/removing memory blocks
  Driver core: Move find_memory_block routine
  hpilo: Despecificate driver from iLO generation
  driver core: Convert link_mem_sections to use find_memory_block_hinted.
  driver core: Introduce find_memory_block_hinted which utilizes kset_find_obj_hinted.
  kobject: Introduce kset_find_obj_hinted.
  driver core: fix build for CONFIG_BLOCK not enabled
  driver-core: base: change to new flag variable
  sysfs: only access bin file vm_ops with the active lock
  sysfs: Fail bin file mmap if vma close is implemented.
  FW_LOADER: fix kconfig dependency warning on HOTPLUG
  uio: Statically allocate uio_class and use class .dev_attrs.
  uio: Support 2^MINOR_BITS minors
  uio: Cleanup irq handling.
  uio: Don't clear driver data
  uio: Fix lack of locking in init_uio_class
  SYSFS: Allow boot time switching between deprecated and modern sysfs layout
  driver core: remove CONFIG_SYSFS_DEPRECATED_V2 but keep it for block devices
  ...

Commit dd3932ed ("block: remove BLKDEV_IFL_WAIT") had removed the
flag argument to blkdev_issue_flush(), but the ocfs2 merge brought in a
new one.  It didn't cause a merge conflict, so the merges silently
worked out fine, but the result didn't actually compile.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: (56 commits)
  [CIFS] move close processing  from cifs_close to cifsFileInfo_put
  cifs: convert cifs_tcp_ses_lock from a rwlock to a spinlock
  cifs: cancel_delayed_work() + flush_scheduled_work() -> cancel_delayed_work_sync()
  Clean up two declarations of blob_len
  cifs: move cifsFileInfo_put to file.c
  cifs: convert GlobalSMBSeslock from a rwlock to regular spinlock
  [CIFS] Fix minor checkpatch warning and update cifs version
  cifs: move cifs_new_fileinfo to file.c
  cifs: eliminate pfile pointer from cifsFileInfo
  cifs: cifs_write argument change and cleanup
  cifs: clean up cifs_reopen_file
  cifs: eliminate the inode argument from cifs_new_fileinfo
  cifs: eliminate oflags option from cifs_new_fileinfo
  cifs: fix flags handling in cifs_posix_open
  cifs: eliminate cifs_posix_open_inode_helper
  cifs: handle FindFirst failure gracefully
  NTLM authentication and signing - Calculate auth response per smb session
  cifs: don't use vfsmount to pin superblock for oplock breaks
  cifs: keep dentry reference in cifsFileInfo instead of inode reference
  cifs: on multiuser mount, set ownership to current_fsuid/current_fsgid (try #7)
  ...

Fix up trivial conflict in fs/cifs/cifsfs.c due to added/removed header files

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (84 commits)
  [SCSI] be2iscsi: SGE Len == 64K
  [SCSI] be2iscsi: Remove premature free of cid
  [SCSI] be2iscsi: More time for FW
  [SCSI] libsas: fix bug for vacant phy
  [SCSI] sd: Fix overflow with big physical blocks
  [SCSI] st: add MTWEOFI to write filemarks without flushing drive buffer
  [SCSI] libsas: Don't issue commands to devices that have been hot-removed
  [SCSI] megaraid_sas: Add Online Controller Reset to MegaRAID SAS drive
  [SCSI] lpfc 8.3.17: Update lpfc driver version to 8.3.17
  [SCSI] lpfc 8.3.17: Replace function reset methodology
  [SCSI] lpfc 8.3.17: SCSI fixes
  [SCSI] lpfc 8.3.17: BSG fixes
  [SCSI] lpfc 8.3.17: SLI Additions and Fixes
  [SCSI] lpfc 8.3.17: Code Cleanup and Locking fixes
  [SCSI] zfcp: Remove scsi_cmnd->serial_number from debug traces
  [SCSI] ipr: fix array error logging
  [SCSI] aha152x: enable PCMCIA on 64bit
  [SCSI] scsi_dh_alua: Handle all states correctly
  [SCSI] cxgb4i: connection and ddp setting update
  [SCSI] cxgb3i: fixed connection over vlan
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Add missing I/O macros {in,out}{w,l}_p() for !CONFIG_ISA
  m68k: Remove big kernel lock in cache flush code
  m68k: __pa(): cast arg to long
  fbdev: atafb - Remove undead ifdef ATAFB_FALCON
  zorro: Fix device_register() error handling
  fbdev/m68k: Fix section mismatches in q40fb.c
  m68k/m68knommu: merge the MMU and non-MMU traps.h
  m68k/m68knommu: merge MMU and non-MMU thread_info.h
  m68k/m68knommu: merge MMU and non-MMU atomic.h
  m68k/m68knommu: clean up page.h
  m68k/m68knommu: merge machdep.h files into a single file
  m68k/m68knommu: merge MMU and non-MMU string.h
  m68k/m68knommu: Remove dead SMP config option
  m68k: move definition of THREAD_SIZE into thread_info_mm.h
  m68k: Use asm-generic/ioctls.h (enables termiox)
  m68k: Remove dead GG2 config option

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
  dlm: Fix dlm lock status block comment in dlm.h
  dlm: Don't send callback to node making lock request when "try 1cb" fails

* 'for-linus' of git://oss.sgi.com/xfs/xfs: (36 commits)
  xfs: semaphore cleanup
  xfs: Extend project quotas to support 32bit project ids
  xfs: remove xfs_buf wrappers
  xfs: remove xfs_cred.h
  xfs: remove xfs_globals.h
  xfs: remove xfs_version.h
  xfs: remove xfs_refcache.h
  xfs: fix the xfs_trans_committed
  xfs: remove unused t_callback field in struct xfs_trans
  xfs: fix bogus m_maxagi check in xfs_iget
  xfs: do not use xfs_mod_incore_sb_batch for per-cpu counters
  xfs: do not use xfs_mod_incore_sb for per-cpu counters
  xfs: remove XFS_MOUNT_NO_PERCPU_SB
  xfs: pack xfs_buf structure more tightly
  xfs: convert buffer cache hash to rbtree
  xfs: serialise inode reclaim within an AG
  xfs: batch inode reclaim lookup
  xfs: implement batched inode lookups for AG walking
  xfs: split out inode walk inode grabbing
  xfs: split inode AG walking into separate code for reclaim
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: update comments to reflect that percpu allocations are always zero-filled
  percpu: Optimize __get_cpu_var()
  x86, percpu: Optimize this_cpu_ptr
  percpu: clear memory allocated with the km allocator
  percpu: fix build breakage on s390 and cleanup build configuration tests
  percpu: use percpu allocator on UP too
  percpu: reduce PCPU_MIN_UNIT_SIZE to 32k
  vmalloc: pcpu_get/free_vm_areas() aren't needed on UP

Fixed up trivial conflicts in include/linux/percpu.h

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: remove in_workqueue_context()
  workqueue: Clarify that schedule_on_each_cpu is synchronous
  memory_hotplug: drop spurious calls to flush_scheduled_work()
  shpchp: update workqueue usage
  pciehp: update workqueue usage
  isdn/eicon: don't call flush_scheduled_work() from diva_os_remove_soft_isr()
  workqueue: add and use WQ_MEM_RECLAIM flag
  workqueue: fix HIGHPRI handling in keep_working()
  workqueue: add queue_work and activate_work trace points
  workqueue: prepare for more tracepoints
  workqueue: implement flush[_delayed]_work_sync()
  workqueue: factor out start_flush_work()
  workqueue: cleanup flush/cancel functions
  workqueue: implement alloc_ordered_workqueue()

Fix up trivial conflict in fs/gfs2/main.c as per Tejun

* 'for-2.6.37/misc' of git://git.kernel.dk/linux-2.6-block:
  pipe: fix failure to return error code on ->confirm()

* 'for-2.6.37/barrier' of git://git.kernel.dk/linux-2.6-block: (46 commits)
  xen-blkfront: disable barrier/flush write support
  Added blk-lib.c and blk-barrier.c was renamed to blk-flush.c
  block: remove BLKDEV_IFL_WAIT
  aic7xxx_old: removed unused 'req' variable
  block: remove the BH_Eopnotsupp flag
  block: remove the BLKDEV_IFL_BARRIER flag
  block: remove the WRITE_BARRIER flag
  swap: do not send discards as barriers
  fat: do not send discards as barriers
  ext4: do not send discards as barriers
  jbd2: replace barriers with explicit flush / FUA usage
  jbd2: Modify ASYNC_COMMIT code to not rely on queue draining on barrier
  jbd: replace barriers with explicit flush / FUA usage
  nilfs2: replace barriers with explicit flush / FUA usage
  reiserfs: replace barriers with explicit flush / FUA usage
  gfs2: replace barriers with explicit flush / FUA usage
  btrfs: replace barriers with explicit flush / FUA usage
  xfs: replace barriers with explicit flush / FUA usage
  block: pass gfp_mask and flags to sb_issue_discard
  dm: convey that all flushes are processed as empty
  ...

* 'for-2.6.37/drivers' of git://git.kernel.dk/linux-2.6-block: (95 commits)
  cciss: fix PCI IDs for new Smart Array controllers
  drbd: add race-breaker to drbd_go_diskless
  drbd: use dynamic_dev_dbg to optionally log uuid changes
  dynamic_debug.h: Fix dynamic_dev_dbg() macro if CONFIG_DYNAMIC_DEBUG not set
  drbd: cleanup: change "<= 0" to "== 0"
  drbd: relax the grace period of the md_sync timer again
  drbd: add some more explicit drbd_md_sync
  drbd: drop wrong debug asserts, fix recently introduced race
  drbd: cleanup useless leftover warn/error printk's
  drbd: add explicit drbd_md_sync to drbd_resync_finished
  drbd: Do not log an ASSERT for P_OV_REQUEST packets while C_CONNECTED
  drbd: fix for possible deadlock on IO error during resync
  drbd: fix unlikely access after free and list corruption
  drbd: fix for spurious fullsync (uuids rotated too fast)
  drbd: allow for explicit resync-finished notifications
  drbd: preparation commit, using full state in receive_state()
  drbd: drbd_send_ack_dp must not rely on header information
  drbd: Fix regression in recv_bm_rle_bits (compressed bitmap)
  drbd: Fixed a stupid copy and paste error
  drbd: Allow larger values for c-fill-target.
  ...

Fix up trivial conflict in drivers/block/ataflop.c due to BKL removal

* 'for-2.6.37/core' of git://git.kernel.dk/linux-2.6-block: (39 commits)
  cfq-iosched: Fix a gcc 4.5 warning and put some comments
  block: Turn bvec_k{un,}map_irq() into static inline functions
  block: fix accounting bug on cross partition merges
  block: Make the integrity mapped property a bio flag
  block: Fix double free in blk_integrity_unregister
  block: Ensure physical block size is unsigned int
  blkio-throttle: Fix possible multiplication overflow in iops calculations
  blkio-throttle: limit max iops value to UINT_MAX
  blkio-throttle: There is no need to convert jiffies to milli seconds
  blkio-throttle: Fix link failure failure on i386
  blkio: Recalculate the throttled bio dispatch time upon throttle limit change
  blkio: Add root group to td->tg_list
  blkio: deletion of a cgroup was causes oops
  blkio: Do not export throttle files if CONFIG_BLK_DEV_THROTTLING=n
  block: set the bounce_pfn to the actual DMA limit rather than to max memory
  block: revert bad fix for memory hotplug causing bounces
  Fix compile error in blk-exec.c for !CONFIG_DETECT_HUNG_TASK
  block: set the bounce_pfn to the actual DMA limit rather than to max memory
  block: Prevent hang_check firing during long I/O
  cfq: improve fsync performance for small files
  ...

Fix up trivial conflicts due to __rcu sparse annotation in include/linux/genhd.h

* 'linux-next' of git://git.infradead.org/ubi-2.6:
  UBI: tighten the corrupted PEB criteria
  UBI: fix check_data_ff return code
  UBI: remember copy_flag while scanning
  UBI: preserve corrupted PEBs
  UBI: add truly corrupted PEBs to corrupted list
  UBI: introduce debugging helper function
  UBI: make check_pattern function non-static
  UBI: do not put eraseblocks to the corrupted list unnecessarily
  UBI: separate out corrupted list
  UBI: change cascade of ifs to switch statements
  UBI: rename a local variable
  UBI: handle bit-flips when no header found
  UBI: remove duplicate IO error codes
  UBI: rename IO error code
  UBI: fix small 80 characters limit style issue
  UBI: cleanup and simplify Kconfig

* 'linux-next' of git://git.infradead.org/ubifs-2.6:
  UBIFS: do not allocate unneeded scan buffer
  UBIFS: do not forget to cancel timers
  UBIFS: remove a bit of unneeded code
  UBIFS: add a commentary about log recovery
  UBIFS: avoid kernel error if ubifs superblock read fails
  UBIFS: introduce new flags for RO mounts
  UBIFS: introduce new flag for RO due to errors
  UBIFS: check return code of pnode_lookup
  UBIFS: check return code of ubifs_lpt_lookup
  UBIFS: improve error reporting when reading bad node
  UBIFS: introduce list sorting debugging checks
  UBIFS: fix assertion warnings in comparison function
  UBIFS: mark unused key objects as invalid
  UBIFS: do not write rubbish into truncation scanning node
  UBIFS: improve assertion in node comparison functions
  UBIFS: do not use key type in list_sort
  UBIFS: do not look up truncation nodes
  UBIFS: fix assertion warning
  UBIFS: do not treat ENOSPC specially
  UBIFS: switch to RO mode after synchronizing

The kdb shell needs to enforce switching back to the original CPU that
took the exception before restoring normal kernel execution.  Resuming
from a different CPU than what took the original exception will cause
problems with spin locks that are freed from the a different processor
than had taken the lock.

The special logic in dbg_cpu_switch() can go away entirely with
because the state of what cpus want to be masters or slaves will
remain unchanged between entry and exit of the debug_core exception
context.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

For quite some time there have been problems with memory barriers and
various races with NMI on multi processor systems using the kernel
debugger.  The algorithm for entering the kernel debug core and
resuming kernel execution was racy and had several known edge case
problems with attempting to debug something on a heavily loaded system
using breakpoints that are hit repeatedly and quickly.

The prior "locking" design entry worked as follows:

  * The atomic counter kgdb_active was used with atomic exchange in
    order to elect a master cpu out of all the cpus that may have
    taken a debug exception.
  * The master cpu increments all elements of passive_cpu_wait[].
  * The master cpu issues the round up cpus message.
  * Each "slave cpu" that enters the debug core increments its own
    element in cpu_in_kgdb[].
  * Each "slave cpu" spins on passive_cpu_wait[] until it becomes 0.
  * The master cpu debugs the system.

The new scheme removes the two arrays of atomic counters and replaces
them with 2 single counters.  One counter is used to count the number
of cpus waiting to become a master cpu (because one or more hit an
exception). The second counter is use to indicate how many cpus have
entered as slave cpus.

The new entry logic works as follows:

  * One or more cpus enters via kgdb_handle_exception() and increments
    the masters_in_kgdb. Each cpu attempts to get the spin lock called
    dbg_master_lock.
  * The master cpu sets kgdb_active to the current cpu.
  * The master cpu takes the spinlock dbg_slave_lock.
  * The master cpu asks to round up all the other cpus.
  * Each slave cpu that is not already in kgdb_handle_exception()
    will enter and increment slaves_in_kgdb.  Each slave will now spin
    try_locking on dbg_slave_lock.
  * The master cpu waits for the sum of masters_in_kgdb and slaves_in_kgdb
    to be equal to the sum of the online cpus.
  * The master cpu debugs the system.

In the new design the kgdb_active can only be changed while holding
dbg_master_lock.  Stress testing has not turned up any further
entry/exit races that existed in the prior locking design.  The prior
locking design suffered from atomic variables not being truly atomic
(in the capacity as used by kgdb) along with memory barrier races.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Dongdong Deng <dongdong.deng@windriver.com>

The kernel debug_core invokes hw breakpoint install and removal via
call backs.  The architecture specific kgdb stubs only need to
implement the call backs and not actually call the functions.
Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
CC: x86@kernel.org
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Ingo Molnar <mingo@redhat.com>
CC: H. Peter Anvin <hpa@zytor.com>

The slave cpus do not have the hw breakpoints disabled upon entry to
the debug_core and as a result could cause unrecoverable recursive
faults on badly placed breakpoints, or get out of sync with the arch
specific hw breakpoint operations.

This patch addresses the problem by invoking kgdb_disable_hw_debug()
earlier in kgdb_enter_cpu for each cpu that enters the debug core.

The hw breakpoint dis/enable flow should be:

master_debug_cpu   slave_debug_cpu
         \              /
          kgdb_cpu_enter
                |
        kgdb_disable_hw_debug --> uninstall pre-enabled hw_breakpoint
                |
 do add/rm dis/enable operates to hw_breakpoints on master_debug_cpu..
                |
        correct_hw_break --> correct/install the enabled hw_breakpoint
                |
           leave_kgdb
Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

Fix the following sparse warnings:

kdb_main.c:328:5: warning: symbol 'kdbgetu64arg' was not declared. Should it be static?
kgdboc.c:246:12: warning: symbol 'kgdboc_early_init' was not declared. Should it be static?
kgdb.c:652:26: warning: incorrect type in argument 1 (different address spaces)
kgdb.c:652:26:    expected void const *ptr
kgdb.c:652:26:    got struct perf_event *[noderef] <asn:3>*pev

The one in kgdb.c required the (void * __force) because of the return
code from register_wide_hw_breakpoint looking like:

        return (void __percpu __force *)ERR_PTR(err);
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

Nothing should try to use kdb_commands directly as sometimes it is
null.  Instead, use the for_each_kdbcmd() iterator.

This particular problem dates back to the initial kdb merge (2.6.35),
but at that point nothing was dynamically unregistering commands from
the kdb shell.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

Now that include/linux/kdb.h properly exports all the functions
required to dynamically add a kdb shell command, the reference to the
private kdb header can be removed.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

In order to allow kernel modules to dynamically add a command to the
kdb shell the kdb_register, kdb_register_repeat, kdb_unregister, and
kdb_printf need to be exported as GPL symbols.

Any kernel module that adds a dynamic kdb shell function should only
need to include linux/kdb.h.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

When returning from the kernel debugger reset the rcu jiffies_stall
value to prevent the rcu stall detector from sending NMI events which
invoke a stack dump for each cpu in the system.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

Move the various clock and watch dog syncs to a single function in
advance of adding another sync for the rcu stall detector.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

HW breakpoints events stopped working correctly with kgdb as a result
of commit: 018cbffe (Merge commit
'v2.6.33' into perf/core), later commit:
ba773f7c (x86,kgdb: Fix hw breakpoint
regression) allowed breakpoints to propagate to the debugger core but
did not completely address the original regression in functionality
found in 2.6.35.

When the DR_STEP flag is set in dr6 along with any of the DR_TRAP
bits, the kgdb exception handler will enter once from the
hw_breakpoint API call back and again from the die notifier for
do_debug(), which causes the debugger to stop twice and also for the
kgdb regression tests to fail running under kvm with:

echo V2I1 > /sys/module/kgdbts/parameters/kgdbts

To address the problem, the kgdb overflow handler needs to implement
the same logic as the ptrace overflow handler call back with respect
to updating the virtual copy of dr6.  This will allow the kgdb
do_debug() die notifier to properly handle the exception and the
attached debugger, or kgdb test suite, will only receive a single
notification.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
CC: Frederic Weisbecker <fweisbec@gmail.com>
CC: x86@kernel.org